Language:
Format:

Language:
Format:

Chapter 44. l2gw

This chapter describes the commands under the l2gw command.

44.1. l2gw connection create

Create l2gateway-connection

Usage:

openstack l2gw connection create [-h]
                                        [-f {json,shell,table,value,yaml}]
                                        [-c COLUMN] [--noindent]
                                        [--prefix PREFIX]
                                        [--max-width <integer>] [--fit-width]
                                        [--print-empty]
                                        [--default-segmentation-id SEG_ID]
                                        <GATEWAY-NAME/UUID>
                                        <NETWORK-NAME/UUID>

Table 44.1. Positional arguments

Value	Summary
<GATEWAY-NAME/UUID>	Descriptive name for logical gateway.
<NETWORK-NAME/UUID>	Network name or uuid.

Table 44.2. Command arguments

Value	Summary
-h, --help	Show this help message and exit
--default-segmentation-id SEG_ID	Default segmentation-id that will be applied to the interfaces for which segmentation id was not specified in l2-gateway-create command.

Table 44.3. Output formatter options

Value	Summary
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}	The output format, defaults to table
-c COLUMN, --column COLUMN	Specify the column(s) to include, can be repeated

Table 44.4. JSON formatter options

Value	Summary
--noindent	Whether to disable indenting the json

Table 44.5. Shell formatter options

Value	Summary
--prefix PREFIX	Add a prefix to all variable names

Table 44.6. Table formatter options

Value	Summary
--max-width <integer>	Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
--fit-width	Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
--print-empty	Print empty table if there is no data to show.

44.2. l2gw connection delete

Delete a given l2gateway-connection

Usage:

openstack l2gw connection delete [-h]
                                        <L2_GATEWAY_CONNECTIONS>
                                        [<L2_GATEWAY_CONNECTIONS> ...]

Table 44.7. Positional arguments

Value	Summary
<L2_GATEWAY_CONNECTIONS>	Id(s) of l2_gateway_connections(s) to delete.

Table 44.8. Command arguments

Value	Summary
-h, --help	Show this help message and exit

44.3. l2gw connection list

List l2gateway-connections

Usage:

openstack l2gw connection list [-h] [-f {csv,json,table,value,yaml}]
                                      [-c COLUMN]
                                      [--quote {all,minimal,none,nonnumeric}]
                                      [--noindent] [--max-width <integer>]
                                      [--fit-width] [--print-empty]
                                      [--sort-column SORT_COLUMN]
                                      [--project <project>]
                                      [--project-domain <project-domain>]

Table 44.9. Command arguments

Value	Summary
-h, --help	Show this help message and exit
--project <project>	Owner’s project (name or id)
--project-domain <project-domain>	Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

Table 44.10. Output formatter options

Value	Summary
-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}	The output format, defaults to table
-c COLUMN, --column COLUMN	Specify the column(s) to include, can be repeated
--sort-column SORT_COLUMN	Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

Table 44.11. CSV formatter options

Value	Summary
--quote {all,minimal,none,nonnumeric}	When to include quotes, defaults to nonnumeric

Table 44.12. JSON formatter options

Value	Summary
--noindent	Whether to disable indenting the json

Table 44.13. Table formatter options

Value	Summary
--max-width <integer>	Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
--fit-width	Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
--print-empty	Print empty table if there is no data to show.

44.4. l2gw connection show

Show information of a given l2gateway-connection

Usage:

openstack l2gw connection show [-h] [-f {json,shell,table,value,yaml}]
                                      [-c COLUMN] [--noindent]
                                      [--prefix PREFIX]
                                      [--max-width <integer>] [--fit-width]
                                      [--print-empty]
                                      <L2_GATEWAY_CONNECTION>

Table 44.14. Positional arguments

Value	Summary
<L2_GATEWAY_CONNECTION>	Id of l2_gateway_connection to look up.

Table 44.15. Command arguments

Value	Summary
-h, --help	Show this help message and exit

Table 44.16. Output formatter options

Value	Summary
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}	The output format, defaults to table
-c COLUMN, --column COLUMN	Specify the column(s) to include, can be repeated

Table 44.17. JSON formatter options

Value	Summary
--noindent	Whether to disable indenting the json

Table 44.18. Shell formatter options

Value	Summary
--prefix PREFIX	Add a prefix to all variable names

Table 44.19. Table formatter options

Value	Summary
--max-width <integer>	Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
--fit-width	Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
--print-empty	Print empty table if there is no data to show.

44.5. l2gw create

Create l2gateway resource

Usage:

openstack l2gw create [-h] [-f {json,shell,table,value,yaml}]
                             [-c COLUMN] [--noindent] [--prefix PREFIX]
                             [--max-width <integer>] [--fit-width]
                             [--print-empty] [--project <project>]
                             [--project-domain <project-domain>]
                             [--device name=name,interface_names=INTERFACE-DETAILS]
                             <GATEWAY-NAME>

Table 44.20. Positional arguments

Value	Summary
<GATEWAY-NAME>	Descriptive name for logical gateway.

Table 44.21. Command arguments

Value	Summary
-h, --help	Show this help message and exit
--project <project>	Owner’s project (name or id)
--project-domain <project-domain>	Domain the project belongs to (name or id). this can be used in case collisions between project names exist.
--device name=name,interface_names=INTERFACE-DETAILS	Device name and interface-names of l2gateway. INTERFACE-DETAILS is of form "<interface_name1>;[<inte rface_name2>][\|<seg_id1>[#<seg_id2>]]" (--device option can be repeated)

Table 44.22. Output formatter options

Value	Summary
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}	The output format, defaults to table
-c COLUMN, --column COLUMN	Specify the column(s) to include, can be repeated

Table 44.23. JSON formatter options

Value	Summary
--noindent	Whether to disable indenting the json

Table 44.24. Shell formatter options

Value	Summary
--prefix PREFIX	Add a prefix to all variable names

Table 44.25. Table formatter options

Value	Summary
--max-width <integer>	Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
--fit-width	Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
--print-empty	Print empty table if there is no data to show.

44.6. l2gw delete

Delete a given l2gateway

Usage:

openstack l2gw delete [-h] <L2_GATEWAY> [<L2_GATEWAY> ...]

Table 44.26. Positional arguments

Value	Summary
<L2_GATEWAY>	Id(s) or name(s) of l2_gateway to delete.

Table 44.27. Command arguments

Value	Summary
-h, --help	Show this help message and exit

44.7. l2gw list

List l2gateway that belongs to a given tenant

Usage:

openstack l2gw list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN]
                           [--quote {all,minimal,none,nonnumeric}]
                           [--noindent] [--max-width <integer>] [--fit-width]
                           [--print-empty] [--sort-column SORT_COLUMN]
                           [--project <project>]
                           [--project-domain <project-domain>]

Table 44.28. Command arguments

Value	Summary
-h, --help	Show this help message and exit
--project <project>	Owner’s project (name or id)
--project-domain <project-domain>	Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

Table 44.29. Output formatter options

Value	Summary
-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}	The output format, defaults to table
-c COLUMN, --column COLUMN	Specify the column(s) to include, can be repeated
--sort-column SORT_COLUMN	Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

Table 44.30. CSV formatter options

Value	Summary
--quote {all,minimal,none,nonnumeric}	When to include quotes, defaults to nonnumeric

Table 44.31. JSON formatter options

Value	Summary
--noindent	Whether to disable indenting the json

Table 44.32. Table formatter options

Value	Summary
--max-width <integer>	Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
--fit-width	Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
--print-empty	Print empty table if there is no data to show.

44.8. l2gw show

Show information of a given l2gateway

Usage:

openstack l2gw show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN]
                           [--noindent] [--prefix PREFIX]
                           [--max-width <integer>] [--fit-width]
                           [--print-empty]
                           <L2_GATEWAY>

Table 44.33. Positional arguments

Value	Summary
<L2_GATEWAY>	Id or name of l2_gateway to look up.

Table 44.34. Command arguments

Value	Summary
-h, --help	Show this help message and exit

Table 44.35. Output formatter options

Value	Summary
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}	The output format, defaults to table
-c COLUMN, --column COLUMN	Specify the column(s) to include, can be repeated

Table 44.36. JSON formatter options

Value	Summary
--noindent	Whether to disable indenting the json

Table 44.37. Shell formatter options

Value	Summary
--prefix PREFIX	Add a prefix to all variable names

Table 44.38. Table formatter options

Value	Summary
--max-width <integer>	Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
--fit-width	Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
--print-empty	Print empty table if there is no data to show.

44.9. l2gw update

Update a given l2gateway

Usage:

openstack l2gw update [-h] [-f {json,shell,table,value,yaml}]
                             [-c COLUMN] [--noindent] [--prefix PREFIX]
                             [--max-width <integer>] [--fit-width]
                             [--print-empty] [--name name]
                             [--device name=name,interface_names=INTERFACE-DETAILS]
                             <L2_GATEWAY>

Table 44.39. Positional arguments

Value	Summary
<L2_GATEWAY>	Id or name of l2_gateway to update.

Table 44.40. Command arguments

Value	Summary
-h, --help	Show this help message and exit
--name name	Descriptive name for logical gateway.
--device name=name,interface_names=INTERFACE-DETAILS	Device name and interface-names of l2gateway. INTERFACE-DETAILS is of form "<interface_name1>;[<inte rface_name2>][\|<seg_id1>[#<seg_id2>]]" (--device option can be repeated)

Table 44.41. Output formatter options

Value	Summary
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}	The output format, defaults to table
-c COLUMN, --column COLUMN	Specify the column(s) to include, can be repeated

Table 44.42. JSON formatter options

Value	Summary
--noindent	Whether to disable indenting the json

Table 44.43. Shell formatter options

Value	Summary
--prefix PREFIX	Add a prefix to all variable names

Table 44.44. Table formatter options

Value	Summary
--max-width <integer>	Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
--fit-width	Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
--print-empty	Print empty table if there is no data to show.

Select Your Language

Chapter 44. l2gw

44.1. l2gw connection create

44.2. l2gw connection delete

44.3. l2gw connection list

44.4. l2gw connection show

44.5. l2gw create

44.6. l2gw delete

44.7. l2gw list

44.8. l2gw show

44.9. l2gw update

Quick Links

Help

Site Info

Related Sites

About

Red Hat legal and privacy links

Red Hat legal and privacy links

Language and Page Formatting Options

Chapter 44. l2gw

44.1. l2gw connection create

44.2. l2gw connection delete

44.3. l2gw connection list

44.4. l2gw connection show

44.5. l2gw create

44.6. l2gw delete

44.7. l2gw list

44.8. l2gw show

44.9. l2gw update

Quick Links

Help

Site Info

Related Sites

Systems Status

About

Red Hat legal and privacy links

Red Hat legal and privacy links