Appendix A. Reference information for getting started with JBoss EAP

--admin-only

Standalone

Sets the server’s running type to ADMIN_ONLY. The argument opens administrative interfaces and accepts management requests, but the argument does not start other runtime services or accept user requests. For best performance, use the --start-mode=admin-only argument.

--admin-only

Domain

Sets the host controller’s running type to ADMIN_ONLY causing the the host controller to open administrative interfaces and accept management requests, but the host controller does not start servers. For the master host controller for the domain, it accepts incoming connections from slave host controllers.

-b=<value>, -b <value>

Standalone, Domain

Set system property jboss.bind.address, which you can use to configure the bind address for the public interface. The bind address defaults to 127.0.0.1. See the -b<interface>=<value> entry for setting the bind address for other interfaces.

-b<interface>=<value>

Standalone, Domain

Set system property jboss.bind.address.<interface> to the given value. For example, -bmanagement=IP_ADDRESS.

--backup

Domain

Keep a copy of the persistent domain configuration even if this host is not the domain controller.

-c=<config>, -c <config>

Standalone

Name of the server configuration file to use. The default is standalone.xml.

-c=<config>, -c <config>

Domain

Name of the server configuration file to use. The default is domain.xml.

--cached-dc

Domain

If the host is not the domain controller and cannot contact the domain controller at boot then you must boot by using a locally cached copy of the domain configuration.

--debug [<port>]

Standalone

Activate debug mode with an optional argument to specify the port. Argument only works if the launch script supports the Argument.

-D<name>[=<value>]

Standalone, Domain

Set a system property.

--domain-config=<config>

Domain

Name of the server configuration file to use. Defaults as domain.xml.

--git-repo

Standalone

The location of the Git repository that is used to manage and persist server configuration data. This can be local if you want to store it locally, or the URL to a remote repository.

--git-branch

Standalone

The branch or tag name in the Git repository to use. This argument should name an existing branch or tag name as it will not be created if it does not exist. If you use a tag name, you put the repository in a detached HEAD state, meaning future commits are not attached to any branches. Tag names are read-only and are normally used when you need to replicate a configuration across several nodes.

--git-auth

Standalone

The URL to an Elytron configuration file that contains the credentials the server uses when it connects to a remote Git repository. You can use the argument when your remote Git repository requires authentication. Elytron does not support SSH. Elytron supports only default SSH authentication by using private keys without a password. You cannot use the argument with a local repository.

-h, --help

Standalone, Domain

Display the help message and exit the help index.

--host-config=<config>

Domain

Name of the host configuration file to use. Defaults as host.xml.

--interprocess-hc-address=<address>

Domain

Address on which the host controller can listen for communication from the process controller.

--interprocess-hc-port=<port>

Domain

Port on which the host controller can listen for communication from the process controller.

--master-address=<address>

Domain

Set system property jboss.domain.master.address to the given value. In a default slave host controller configuration, you can use the argument to configure the address of the master host controller.

--master-port=<port>

Domain

Set system property jboss.domain.master.port to the given value. In a default slave host controller configuration, you can use the argument to configure the port used for native management communication by the master host controller.

--read-only-server-config=<config>

Standalone

Name of the server configuration file to use. Argument differs from --server-config and -c in that the argument does not overwrite the original file.

--read-only-domain-config=<config>

Domain

Name of the domain configuration file to use. Argument differs from --domain-config and -c in that the argument does not overwrite the initial file.

--read-only-host-config=<config>

Domain

Name of the host configuration file to use. Argument differs from --host-config in that the argument does not overwrite the initial file.

-P=<url>, -P <url>, --properties=<url>

Standalone, Domain

Load system properties from the given URL.

--pc-address=<address>

Domain

Address on which the process controller listens for communication from processes it controls.

--pc-port=<port>

Domain

Port on which the process controller listens for communication from processes it controls.

-S<name>[=<value>]

Standalone

Set a security property.

-secmgr

Standalone, Domain

Runs the server with a security manager installed.

--server-config=<config>

Standalone

Name of the server configuration file to use. Defaults as standalone.xml.

--start-mode=<mode>

Standalone

Set the start mode of the server. You cannot use the argument cannot with the --admin-only argument. You can use the following entries with the argument:

-u=<value>, -u <value>

Standalone, Domain

Set system property jboss.default.multicast.address, which the server uses in configuring the multicast address in the socket-binding elements in the configuration files. Defaults as 230.0.0.4.

-v, -V, --version

Standalone, Domain

Display the application server version and exit.

-a

Creates a user in the application realm. If you do not create a user in the application realm then the script creates a user in the management realm by default.

-dc <value>

The domain configuration directory that contains the properties files. If you omit the argument then the script sets EAP_HOME/domain/configuration/ as the default directory.

-sc <value>

An alternative standalone server configuration directory that contains properties files. If you omit the argument then the script sets EAP_HOME/standalone/configuration/ as the default directory.

-up, --user-properties <value>

The name of the alternative user properties file. You can set an absolute path for the file or specify a file name by using the argument with an -sc or a -dc argument to set an alternative configuration directory.

-g, --group <value>

A comma-separated list of groups to assign to a user.

-gp, --group-properties <value>

The name of the alternative group properties file. You can set an absolute path for the file or specify a file name by using the argument with an -sc or a -dc argument to set an alternative configuration directory.

-p, --password <value>

The password of the user.

-u, --user <value>

The name of the user. User names can only contain the following characters, in any number and in any order:

-r, --realm <value>

The name of the realm used to secure the management interfaces. If omitted, the default is ManagementRealm.

-s, --silent

Run the add-user script with no output to the console.

-e, --enable

Enable the user.

-d, --disable

Disable the user.

-cw, --confirm-warning

Automatically confirm warning in interactive mode.

-h, --help

Display usage information for the add-user script.

-ds, --display-secret

Print the secret value in non-interactive mode.

any

Specifies that an interface must meet at least one, but not necessarily all, of the selected nested set of criteria.

any-address

Empty attribute that binds a wildcard address to sockets that use an interface. The attribute has the following configuration options:

inet-address

Specifies either an IP address in IPv6 or IPv4 dotted decimal notation or a host name resolved to an IP address.

link-local-address

Empty attribute that specifies criteria for whether or not an interface includes a link-local address.

loopback

Empty attribute that specifies criteria for whether or not an interface identifies as a loopback interface.

loopback-address

A loopback address that might not have been configured on the machine’s loopback interface. Attribute differs from inet-address type, as the interface uses the attribute value even if the value contains an NIC without an IP address.

multicast

Empty attribute that specifies criteria for whether or not an interface supports multicast.

name

The name of the interface.

nic

The name of a network interface, such as eth0, eth1, or lo).

nic-match

A regular expression that matches the names of the network interfaces available on a machine to an acceptable interface.

not

Attribute that indicates the selection criteria that an interface must not meet.

point-to-point

Empty attribute that specifies criteria for whether or not an interface identifies as a point-to-point interface.

public-address

Empty attribute that specifies criteria for whether or not an interface contains a publicly routable address.

site-local-address

Empty attribute that specifies criteria for whether or not an interface contains a site-local address.

subnet-match

Specifies a network IP address and the number of bits in the address' network prefix, which is written in slash notation ,such as 192.168.0.0/16.

up

Empty attribute that specifies criteria for whether or not an interface locates as up.

virtual

Empty attribute that specifies criteria for whether or not an interface contains identifies as a virtual interface.

client-mappings

Specifies the client mappings for an inbound socket binding. A client that connects to an inbound socket must use the destination address specified in the mapping. This address matches the outbound interface. By using the client-mapping attribute with an inbound socket binding, you can apply advanced network topologies that use either network address translation or include bindings on multiple network interfaces. You must evaluate each mapping in declared order; that is, the first successful match determines the destination for the mapping.

fixed-port

Use the attribute to determine if the port value must remain fixed. You can use the attribute even if you applied numeric offsets to the other sockets in the socket group.

interface

Attribute that sets name of the interface to which the socket binds. You can also use the attribute to set the interface that multicast sockets must listen. If you do not define a declared interface then the attribute uses the default-interface value from the enclosing socket binding group..

multicast-address

Multicast address on which the socket receives multicast traffic. If you do not specify a value for the attribute then you do not configure the socket to receive multicast functionality.

multicast-port

Port on which the socket receives multicast traffic. You must configure the attrbiute if you configured the multicast-address attribute.

name

You must set a name of the socket. A service requiring access to the socket configuration information cannot use the name to find the socket.

port

Number of the port to which the socket binds. You must override the attribute value if you configured servers to apply a port-offset to increment or decrement all port values.

fixed-source-port

Determines whether the port value must remain fixed, even if you applied numeric offsets to the other outbound sockets in a socket group.

host

The host name or IP address of the remote destination to which an outbound socket connects.

port

The port number of the remote destination to which an outbound socket connects.

source-interface

The name of the interface that JBoss EAP uses for the source address of the outbound socket.

source-port

The port number that JBoss EAP uses as the source port of the outbound socket.

fixed-source-port

Determines whether the port value must remain fixed, even if you applied numeric offsets to the other outbound sockets in the socket group.

socket-binding-ref

The name of the local socket binding that JBoss EAP uses to determine the port for the connecting outbound socket.

source-interface

The name of the interface that JBoss EAP uses for the source address of the outbound socket.

source-port

The port number that JBoss EAP uses as the source port of the outbound socket.

ajp

8009

Apache JServ Protocol. Used for HTTP clustering and load balancing.

http

8080

The default port for deployed web applications.

https

8443

SSL-encrypted connection between deployed web applications and clients.

management-http

9990

Used for HTTP communication with the management layer.

management-https

9993

Used for HTTPS communication with the management layer.

txn-recovery-environment

4712

The JTA transaction recovery manager.

txn-status-manager

4713

The JTA / JTS transaction manager.

ajp

8009

Apache JServ Protocol. Used for HTTP clustering and load balancing.

http

8080

The default port for deployed web applications.

https

8443

SSL-encrypted connection between deployed web applications and clients.

iiop

3528

CORBA services for JTS transactions and other ORB-dependent services.

iiop-ssl

3529

SSL-encrypted CORBA services.

management-http

9990

Used for HTTP communication with the management layer.

management-https

9993

Used for HTTPS communication with the management layer.

txn-recovery-environment

4712

The JTA transaction recovery manager.

txn-status-manager

4713

The JTA / JTS transaction manager.