Chapter 2. Managing kernel modules

Procedure

1. Select a kernel module you want to load.

   The modules are located in the /lib/modules/$(uname -r)/kernel/<SUBSYSTEM>/ directory.

2. Load the relevant kernel module:

   # modprobe <MODULE_NAME>

   Note

   When entering the name of a kernel module, do not append the .ko.xz extension to the end of the name. Kernel module names do not have extensions; their corresponding files do.

Procedure

1. List all loaded kernel modules:

   # lsmod

2. Select the kernel module you want to unload.

   If a kernel module has dependencies, unload those prior to unloading the kernel module. For details on identifying modules with dependencies, see Listing currently loaded kernel modules and Kernel module dependencies.

3. Unload the relevant kernel module:

   # modprobe -r <MODULE_NAME>

   When entering the name of a kernel module, do not append the .ko.xz extension to the end of the name. Kernel module names do not have extensions; their corresponding files do.

Procedure

1. Boot the system into the boot loader.
2. Use the cursor keys to highlight the relevant boot loader entry.

3. Press the e key to edit the entry.

   Figure 2.1. Kernel boot menu

   
4. Use the cursor keys to navigate to the line that starts with linux.

5. Append modprobe.blacklist=module_name to the end of the line.

   Figure 2.2. Kernel boot entry

   

   The serio_raw kernel module illustrates a rogue module to be unloaded early in the boot process.

6. Press Ctrl+X to boot using the modified configuration.

Procedure

1. Select a kernel module you want to load during the boot process.

   The modules are located in the /lib/modules/$(uname -r)/kernel/<SUBSYSTEM>/ directory.

2. Create a configuration file for the module:

   # echo <MODULE_NAME> > /etc/modules-load.d/<MODULE_NAME>.conf

   Note

   When entering the name of a kernel module, do not append the .ko.xz extension to the end of the name. Kernel module names do not have extensions; their corresponding files do.

3. Optionally, after reboot, verify the relevant module was loaded:

   $ lsmod | grep <MODULE_NAME>

   The example command above should succeed and display the relevant kernel module.

Procedure

1. List modules loaded to the currently running kernel by using the lsmod command:

   $ lsmod
   Module                  Size  Used by
   tls                   131072  0
   uinput                 20480  1
   snd_seq_dummy          16384  0
   snd_hrtimer            16384  1
   …

   In the output, identify the module you want to prevent from being loaded.

   • Alternatively, identify an unloaded kernel module you want to prevent from potentially loading in the /lib/modules/<KERNEL-VERSION>/kernel/<SUBSYSTEM>/ directory, for example:

     $ ls /lib/modules/4.18.0-477.20.1.el8_8.x86_64/kernel/crypto/
     ansi_cprng.ko.xz        chacha20poly1305.ko.xz  md4.ko.xz               serpent_generic.ko.xz
     anubis.ko.xz            cmac.ko.xz…

2. Create a configuration file serving as a denylist:

   # touch /etc/modprobe.d/denylist.conf

3. In a text editor of your choice, combine the names of modules you want to exclude from automatic loading to the kernel with the blacklist configuration command, for example:

   # Prevents <KERNEL-MODULE-1> from being loaded
   blacklist <MODULE-NAME-1>
   install <MODULE-NAME-1> /bin/false
   
   # Prevents <KERNEL-MODULE-2> from being loaded
   blacklist <MODULE-NAME-2>
   install <MODULE-NAME-2> /bin/false
   …

   Because the blacklist command does not prevent the module from being loaded as a dependency for another kernel module that is not in a denylist, you must also define the install line. In this case, the system runs /bin/false instead of installing the module. The lines starting with a hash sign are comments you can use to make the file more readable.

   Note

   When entering the name of a kernel module, do not append the .ko.xz extension to the end of the name. Kernel module names do not have extensions; their corresponding files do.

4. Create a backup copy of the current initial RAM disk image before rebuilding:

   # cp /boot/initramfs-$(uname -r).img /boot/initramfs-$(uname -r).bak.$(date +%m-%d-%H%M%S).img

   • Alternatively, create a backup copy of an initial RAM disk image which corresponds to the kernel version for which you want to prevent kernel modules from automatic loading:

     # cp /boot/initramfs-<VERSION>.img /boot/initramfs-<VERSION>.img.bak.$(date +%m-%d-%H%M%S)

5. Generate a new initial RAM disk image to apply the changes:

   # dracut -f -v

   • If you build an initial RAM disk image for a different kernel version than your system currently uses, specify both target initramfs and kernel version:

     # dracut -f -v /boot/initramfs-<TARGET-VERSION>.img <CORRESPONDING-TARGET-KERNEL-VERSION>

6. Restart the system:

   $ reboot

Procedure

1. Create the /root/testmodule/test.c file with the following content.

   #include <linux/module.h>
   #include <linux/kernel.h>
   
   int init_module(void)
       { printk("Hello World\n This is a test\n"); return 0; }
   
   void cleanup_module(void)
       { printk("Good Bye World"); }

   The test.c file is a source file that provides the main functionality to the kernel module. The file has been created in a dedicated /root/testmodule/ directory for organizational purposes. After the module compilation, the /root/testmodule/ directory will contain multiple files.

   The test.c file includes from the system libraries:

   • The linux/kernel.h header file is necessary for the printk() function in the example code.
   • The linux/module.h file contains function declarations and macro definitions to be shared between several source files written in C programming language.
2. Follow the init_module() and cleanup_module() functions to start and end the kernel logging function printk(), which prints text.

3. Create the /root/testmodule/Makefile file with the following content.

   obj-m := test.o

   The Makefile contains instructions that the compiler has to produce an object file specifically named test.o. The obj-m directive specifies that the resulting test.ko file is going to be compiled as a loadable kernel module. Alternatively, the obj-y directive would instruct to build test.ko as a built-in kernel module.

4. Compile the kernel module.

   # make -C /lib/modules/$(uname -r)/build M=/root/testmodule modules
   make: Entering directory '/usr/src/kernels/4.18.0-305.el8.x86_64'
     CC [M]  /root/testmodule/test.o
     Building modules, stage 2.
     MODPOST 1 modules
   WARNING: modpost: missing MODULE_LICENSE() in /root/testmodule/test.o
   see include/linux/module.h for more information
     CC      /root/testmodule/test.mod.o
     LD [M]  /root/testmodule/test.ko
   make: Leaving directory '/usr/src/kernels/4.18.0-305.el8.x86_64'

   The compiler creates an object file (test.o) for each source file (test.c) as an intermediate step before linking them together into the final kernel module (test.ko).

   After a successful compilation, /root/testmodule/ contains additional files that relate to the compiled custom kernel module. The compiled module itself is represented by the test.ko file.

Verification

1. Optional: check the contents of the /root/testmodule/ directory:

   # ls -l /root/testmodule/
   total 152
   -rw-r—​r--. 1 root root    16 Jul 26 08:19 Makefile
   -rw-r—​r--. 1 root root    25 Jul 26 08:20 modules.order
   -rw-r—​r--. 1 root root     0 Jul 26 08:20 Module.symvers
   -rw-r—​r--. 1 root root   224 Jul 26 08:18 test.c
   -rw-r—​r--. 1 root root 62176 Jul 26 08:20 test.ko
   -rw-r—​r--. 1 root root    25 Jul 26 08:20 test.mod
   -rw-r—​r--. 1 root root   849 Jul 26 08:20 test.mod.c
   -rw-r—​r--. 1 root root 50936 Jul 26 08:20 test.mod.o
   -rw-r—​r--. 1 root root 12912 Jul 26 08:20 test.o

2. Copy the kernel module to the /lib/modules/$(uname -r)/ directory:

   # cp /root/testmodule/test.ko /lib/modules/$(uname -r)/

3. Update the modular dependency list:

   # depmod -a

4. Load the kernel module:

   # modprobe -v test
   insmod /lib/modules/4.18.0-305.el8.x86_64/test.ko

5. Verify that the kernel module was successfully loaded:

   # lsmod | grep test
   test                   16384  0

6. Read the latest messages from the kernel ring buffer:

   # dmesg
   [74422.545004] Hello World
                   This is a test