Operators

OpenShift Container Platform 4.8

Working with Operators in OpenShift Container Platform

Red Hat OpenShift Documentation Team

Abstract

This document provides information for working with Operators in OpenShift Container Platform. This includes instructions for cluster administrators on how to install and manage Operators, as well as information for developers on how to create applications from installed Operators. This also contains guidance on building your own Operator using the Operator SDK.

Chapter 1. Operators overview

Operators are among the most important components of OpenShift Container Platform. Operators are the preferred method of packaging, deploying, and managing services on the control plane. They can also provide advantages to applications that users run.

Operators integrate with Kubernetes APIs and CLI tools such as kubectl and oc commands. They provide the means of monitoring applications, performing health checks, managing over-the-air (OTA) updates, and ensuring that applications remain in your specified state.

While both follow similar Operator concepts and goals, Operators in OpenShift Container Platform are managed by two different systems, depending on their purpose:

  • Cluster Operators, which are managed by the Cluster Version Operator (CVO), are installed by default to perform cluster functions.
  • Optional add-on Operators, which are managed by Operator Lifecycle Manager (OLM), can be made accessible for users to run in their applications.

With Operators, you can create applications to monitor the running services in the cluster. Operators are designed specifically for your applications. Operators implement and automate the common Day 1 operations such as installation and configuration as well as Day 2 operations such as autoscaling up and down and creating backups. All these activities are in a piece of software running inside your cluster.

1.1. For developers

As a developer, you can perform the following Operator tasks:

1.2. For administrators

As a cluster administrator, you can perform the following Operator tasks:

To know all about the cluster Operators that Red Hat provides, see Cluster Operators reference.

1.3. Next steps

To understand more about Operators, see What are Operators?

Chapter 2. Understanding Operators

2.1. What are Operators?

Conceptually, Operators take human operational knowledge and encode it into software that is more easily shared with consumers.

Operators are pieces of software that ease the operational complexity of running another piece of software. They act like an extension of the software vendor’s engineering team, monitoring a Kubernetes environment (such as OpenShift Container Platform) and using its current state to make decisions in real time. Advanced Operators are designed to handle upgrades seamlessly, react to failures automatically, and not take shortcuts, like skipping a software backup process to save time.

More technically, Operators are a method of packaging, deploying, and managing a Kubernetes application.

A Kubernetes application is an app that is both deployed on Kubernetes and managed using the Kubernetes APIs and kubectl or oc tooling. To be able to make the most of Kubernetes, you require a set of cohesive APIs to extend in order to service and manage your apps that run on Kubernetes. Think of Operators as the runtime that manages this type of app on Kubernetes.

2.1.1. Why use Operators?

Operators provide:

  • Repeatability of installation and upgrade.
  • Constant health checks of every system component.
  • Over-the-air (OTA) updates for OpenShift components and ISV content.
  • A place to encapsulate knowledge from field engineers and spread it to all users, not just one or two.
Why deploy on Kubernetes?
Kubernetes (and by extension, OpenShift Container Platform) contains all of the primitives needed to build complex distributed systems – secret handling, load balancing, service discovery, autoscaling – that work across on-premises and cloud providers.
Why manage your app with Kubernetes APIs and kubectl tooling?
These APIs are feature rich, have clients for all platforms and plug into the cluster’s access control/auditing. An Operator uses the Kubernetes extension mechanism, custom resource definitions (CRDs), so your custom object, for example MongoDB, looks and acts just like the built-in, native Kubernetes objects.
How do Operators compare with service brokers?
A service broker is a step towards programmatic discovery and deployment of an app. However, because it is not a long running process, it cannot execute Day 2 operations like upgrade, failover, or scaling. Customizations and parameterization of tunables are provided at install time, versus an Operator that is constantly watching the current state of your cluster. Off-cluster services are a good match for a service broker, although Operators exist for these as well.

2.1.2. Operator Framework

The Operator Framework is a family of tools and capabilities to deliver on the customer experience described above. It is not just about writing code; testing, delivering, and updating Operators is just as important. The Operator Framework components consist of open source tools to tackle these problems:

Operator SDK
The Operator SDK assists Operator authors in bootstrapping, building, testing, and packaging their own Operator based on their expertise without requiring knowledge of Kubernetes API complexities.
Operator Lifecycle Manager
Operator Lifecycle Manager (OLM) controls the installation, upgrade, and role-based access control (RBAC) of Operators in a cluster. Deployed by default in OpenShift Container Platform 4.8.
Operator Registry
The Operator Registry stores cluster service versions (CSVs) and custom resource definitions (CRDs) for creation in a cluster and stores Operator metadata about packages and channels. It runs in a Kubernetes or OpenShift cluster to provide this Operator catalog data to OLM.
OperatorHub
OperatorHub is a web console for cluster administrators to discover and select Operators to install on their cluster. It is deployed by default in OpenShift Container Platform.

These tools are designed to be composable, so you can use any that are useful to you.

2.1.3. Operator maturity model

The level of sophistication of the management logic encapsulated within an Operator can vary. This logic is also in general highly dependent on the type of the service represented by the Operator.

One can however generalize the scale of the maturity of the encapsulated operations of an Operator for certain set of capabilities that most Operators can include. To this end, the following Operator maturity model defines five phases of maturity for generic day two operations of an Operator:

Figure 2.1. Operator maturity model

operator maturity model

The above model also shows how these capabilities can best be developed through the Helm, Go, and Ansible capabilities of the Operator SDK.

2.2. Operator Framework packaging formats

This guide outlines the packaging format for Operators supported by Operator Lifecycle Manager (OLM) in OpenShift Container Platform.

Note

Support for the legacy package manifest format for Operators is removed in OpenShift Container Platform 4.8 and later. Existing Operator projects in the package manifest format can be migrated to the bundle format by using the Operator SDK pkgman-to-bundle command. See Migrating package manifest projects to bundle format for more details.

2.2.1. Bundle format

The bundle format for Operators is a packaging format introduced by the Operator Framework. To improve scalability and to better enable upstream users hosting their own catalogs, the bundle format specification simplifies the distribution of Operator metadata.

An Operator bundle represents a single version of an Operator. On-disk bundle manifests are containerized and shipped as a bundle image, which is a non-runnable container image that stores the Kubernetes manifests and Operator metadata. Storage and distribution of the bundle image is then managed using existing container tools like podman and docker and container registries such as Quay.

Operator metadata can include:

  • Information that identifies the Operator, for example its name and version.
  • Additional information that drives the UI, for example its icon and some example custom resources (CRs).
  • Required and provided APIs.
  • Related images.

When loading manifests into the Operator Registry database, the following requirements are validated:

  • The bundle must have at least one channel defined in the annotations.
  • Every bundle has exactly one cluster service version (CSV).
  • If a CSV owns a custom resource definition (CRD), that CRD must exist in the bundle.

2.2.1.1. Manifests

Bundle manifests refer to a set of Kubernetes manifests that define the deployment and RBAC model of the Operator.

A bundle includes one CSV per directory and typically the CRDs that define the owned APIs of the CSV in its /manifests directory.

Example bundle format layout

etcd
├── manifests
│   ├── etcdcluster.crd.yaml
│   └── etcdoperator.clusterserviceversion.yaml
│   └── secret.yaml
│   └── configmap.yaml
└── metadata
    └── annotations.yaml
    └── dependencies.yaml

Additionally supported objects

The following object types can also be optionally included in the /manifests directory of a bundle:

Supported optional object types

  • ClusterRole
  • ClusterRoleBinding
  • ConfigMap
  • ConsoleYamlSample
  • PodDisruptionBudget
  • PriorityClass
  • PrometheusRule
  • Role
  • RoleBinding
  • Secret
  • Service
  • ServiceAccount
  • ServiceMonitor
  • VerticalPodAutoscaler

When these optional objects are included in a bundle, Operator Lifecycle Manager (OLM) can create them from the bundle and manage their lifecycle along with the CSV:

Lifecycle for optional objects

  • When the CSV is deleted, OLM deletes the optional object.
  • When the CSV is upgraded:

    • If the name of the optional object is the same, OLM updates it in place.
    • If the name of the optional object has changed between versions, OLM deletes and recreates it.

2.2.1.2. Annotations

A bundle also includes an annotations.yaml file in its /metadata directory. This file defines higher level aggregate data that helps describe the format and package information about how the bundle should be added into an index of bundles:

Example annotations.yaml

annotations:
  operators.operatorframework.io.bundle.mediatype.v1: "registry+v1" 1
  operators.operatorframework.io.bundle.manifests.v1: "manifests/" 2
  operators.operatorframework.io.bundle.metadata.v1: "metadata/" 3
  operators.operatorframework.io.bundle.package.v1: "test-operator" 4
  operators.operatorframework.io.bundle.channels.v1: "beta,stable" 5
  operators.operatorframework.io.bundle.channel.default.v1: "stable" 6

1
The media type or format of the Operator bundle. The registry+v1 format means it contains a CSV and its associated Kubernetes objects.
2
The path in the image to the directory that contains the Operator manifests. This label is reserved for future use and currently defaults to manifests/. The value manifests.v1 implies that the bundle contains Operator manifests.
3
The path in the image to the directory that contains metadata files about the bundle. This label is reserved for future use and currently defaults to metadata/. The value metadata.v1 implies that this bundle has Operator metadata.
4
The package name of the bundle.
5
The list of channels the bundle is subscribing to when added into an Operator Registry.
6
The default channel an Operator should be subscribed to when installed from a registry.
Note

In case of a mismatch, the annotations.yaml file is authoritative because the on-cluster Operator Registry that relies on these annotations only has access to this file.

2.2.1.3. Dependencies file

The dependencies of an Operator are listed in a dependencies.yaml file in the metadata/ folder of a bundle. This file is optional and currently only used to specify explicit Operator-version dependencies.

The dependency list contains a type field for each item to specify what kind of dependency this is. There are two supported types of Operator dependencies:

  • olm.package: This type indicates a dependency for a specific Operator version. The dependency information must include the package name and the version of the package in semver format. For example, you can specify an exact version such as 0.5.2 or a range of versions such as >0.5.1.
  • olm.gvk: With a gvk type, the author can specify a dependency with group/version/kind (GVK) information, similar to existing CRD and API-based usage in a CSV. This is a path to enable Operator authors to consolidate all dependencies, API or explicit versions, to be in the same place.

In the following example, dependencies are specified for a Prometheus Operator and etcd CRDs:

Example dependencies.yaml file

dependencies:
  - type: olm.package
    value:
      packageName: prometheus
      version: ">0.27.0"
  - type: olm.gvk
    value:
      group: etcd.database.coreos.com
      kind: EtcdCluster
      version: v1beta2

2.2.1.4. About opm

The opm CLI tool is provided by the Operator Framework for use with the Operator bundle format. This tool allows you to create and maintain catalogs of Operators from a list of bundles, called an index, that are similar to software repositories. The result is a container image, called an index image, which can be stored in a container registry and then installed on a cluster.

An index contains a database of pointers to Operator manifest content that can be queried through an included API that is served when the container image is run. On OpenShift Container Platform, Operator Lifecycle Manager (OLM) can use the index image as a catalog by referencing it in a CatalogSource object, which polls the image at regular intervals to enable frequent updates to installed Operators on the cluster.

  • See CLI tools for steps on installing the opm CLI.

2.3. Operator Framework glossary of common terms

This topic provides a glossary of common terms related to the Operator Framework, including Operator Lifecycle Manager (OLM) and the Operator SDK.

2.3.1. Common Operator Framework terms

2.3.1.1. Bundle

In the bundle format, a bundle is a collection of an Operator CSV, manifests, and metadata. Together, they form a unique version of an Operator that can be installed onto the cluster.

2.3.1.2. Bundle image

In the bundle format, a bundle image is a container image that is built from Operator manifests and that contains one bundle. Bundle images are stored and distributed by Open Container Initiative (OCI) spec container registries, such as Quay.io or DockerHub.

2.3.1.3. Catalog source

A catalog source is a repository of CSVs, CRDs, and packages that define an application.

2.3.1.4. Channel

A channel defines a stream of updates for an Operator and is used to roll out updates for subscribers. The head points to the latest version of that channel. For example, a stable channel would have all stable versions of an Operator arranged from the earliest to the latest.

An Operator can have several channels, and a subscription binding to a certain channel would only look for updates in that channel.

2.3.1.5. Channel head

A channel head refers to the latest known update in a particular channel.

2.3.1.6. Cluster service version

A cluster service version (CSV) is a YAML manifest created from Operator metadata that assists OLM in running the Operator in a cluster. It is the metadata that accompanies an Operator container image, used to populate user interfaces with information such as its logo, description, and version.

It is also a source of technical information that is required to run the Operator, like the RBAC rules it requires and which custom resources (CRs) it manages or depends on.

2.3.1.7. Dependency

An Operator may have a dependency on another Operator being present in the cluster. For example, the Vault Operator has a dependency on the etcd Operator for its data persistence layer.

OLM resolves dependencies by ensuring that all specified versions of Operators and CRDs are installed on the cluster during the installation phase. This dependency is resolved by finding and installing an Operator in a catalog that satisfies the required CRD API, and is not related to packages or bundles.

2.3.1.8. Index image

In the bundle format, an index image refers to an image of a database (a database snapshot) that contains information about Operator bundles including CSVs and CRDs of all versions. This index can host a history of Operators on a cluster and be maintained by adding or removing Operators using the opm CLI tool.

2.3.1.9. Install plan

An install plan is a calculated list of resources to be created to automatically install or upgrade a CSV.

2.3.1.10. Operator group

An Operator group configures all Operators deployed in the same namespace as the OperatorGroup object to watch for their CR in a list of namespaces or cluster-wide.

2.3.1.11. Package

In the bundle format, a package is a directory that encloses all released history of an Operator with each version. A released version of an Operator is described in a CSV manifest alongside the CRDs.

2.3.1.12. Registry

A registry is a database that stores bundle images of Operators, each with all of its latest and historical versions in all channels.

2.3.1.13. Subscription

A subscription keeps CSVs up to date by tracking a channel in a package.

2.3.1.14. Update graph

An update graph links versions of CSVs together, similar to the update graph of any other packaged software. Operators can be installed sequentially, or certain versions can be skipped. The update graph is expected to grow only at the head with newer versions being added.

2.4. Operator Lifecycle Manager (OLM)

2.4.1. Operator Lifecycle Manager concepts and resources

This guide provides an overview of the concepts that drive Operator Lifecycle Manager (OLM) in OpenShift Container Platform.

2.4.1.1. What is Operator Lifecycle Manager?

Operator Lifecycle Manager (OLM) helps users install, update, and manage the lifecycle of Kubernetes native applications (Operators) and their associated services running across their OpenShift Container Platform clusters. It is part of the Operator Framework, an open source toolkit designed to manage Operators in an effective, automated, and scalable way.

Figure 2.2. Operator Lifecycle Manager workflow

olm workflow

OLM runs by default in OpenShift Container Platform 4.8, which aids cluster administrators in installing, upgrading, and granting access to Operators running on their cluster. The OpenShift Container Platform web console provides management screens for cluster administrators to install Operators, as well as grant specific projects access to use the catalog of Operators available on the cluster.

For developers, a self-service experience allows provisioning and configuring instances of databases, monitoring, and big data services without having to be subject matter experts, because the Operator has that knowledge baked into it.

2.4.1.2. OLM resources

The following custom resource definitions (CRDs) are defined and managed by Operator Lifecycle Manager (OLM):

Table 2.1. CRDs managed by OLM and Catalog Operators

ResourceShort nameDescription

ClusterServiceVersion (CSV)

csv

Application metadata. For example: name, version, icon, required resources.

CatalogSource

catsrc

A repository of CSVs, CRDs, and packages that define an application.

Subscription

sub

Keeps CSVs up to date by tracking a channel in a package.

InstallPlan

ip

Calculated list of resources to be created to automatically install or upgrade a CSV.

OperatorGroup

og

Configures all Operators deployed in the same namespace as the OperatorGroup object to watch for their custom resource (CR) in a list of namespaces or cluster-wide.

OperatorConditions

-

Creates a communication channel between OLM and an Operator it manages. Operators can write to the Status.Conditions array to communicate complex states to OLM.

2.4.1.2.1. Cluster service version

A cluster service version (CSV) represents a specific version of a running Operator on an OpenShift Container Platform cluster. It is a YAML manifest created from Operator metadata that assists Operator Lifecycle Manager (OLM) in running the Operator in the cluster.

OLM requires this metadata about an Operator to ensure that it can be kept running safely on a cluster, and to provide information about how updates should be applied as new versions of the Operator are published. This is similar to packaging software for a traditional operating system; think of the packaging step for OLM as the stage at which you make your rpm, deb, or apk bundle.

A CSV includes the metadata that accompanies an Operator container image, used to populate user interfaces with information such as its name, version, description, labels, repository link, and logo.

A CSV is also a source of technical information required to run the Operator, such as which custom resources (CRs) it manages or depends on, RBAC rules, cluster requirements, and install strategies. This information tells OLM how to create required resources and set up the Operator as a deployment.

2.4.1.2.2. Catalog source

A catalog source represents a store of metadata, typically by referencing an index image stored in a container registry. Operator Lifecycle Manager (OLM) queries catalog sources to discover and install Operators and their dependencies. The OperatorHub in the OpenShift Container Platform web console also displays the Operators provided by catalog sources.

Tip

Cluster administrators can view the full list of Operators provided by an enabled catalog source on a cluster by using the AdministrationCluster SettingsConfigurationOperatorHub page in the web console.

The spec of a CatalogSource object indicates how to construct a pod or how to communicate with a service that serves the Operator Registry gRPC API.

Example 2.1. Example CatalogSource object

apiVersion: operators.coreos.com/v1alpha1
kind: CatalogSource
metadata:
  generation: 1
  name: example-catalog 1
  namespace: openshift-marketplace 2
spec:
  displayName: Example Catalog 3
  image: quay.io/example-org/example-catalog:v1 4
  priority: -400 5
  publisher: Example Org
  sourceType: grpc 6
  updateStrategy:
    registryPoll: 7
      interval: 30m0s
status:
  connectionState:
    address: example-catalog.openshift-marketplace.svc:50051
    lastConnect: 2021-08-26T18:14:31Z
    lastObservedState: READY 8
  latestImageRegistryPoll: 2021-08-26T18:46:25Z 9
  registryService: 10
    createdAt: 2021-08-26T16:16:37Z
    port: 50051
    protocol: grpc
    serviceName: example-catalog
    serviceNamespace: openshift-marketplace
1
Name for the CatalogSource object. This value is also used as part of the name for the related pod that is created in the requested namespace.
2
Namespace to create the catalog in. To make the catalog available cluster-wide in all namespaces, set this value to openshift-marketplace. The default Red Hat-provided catalog sources also use the openshift-marketplace namespace. Otherwise, set the value to a specific namespace to make the Operator only available in that namespace.
3
Display name for the catalog in the web console and CLI.
4
Index image for the catalog.
5
Weight for the catalog source. OLM uses the weight for prioritization during dependency resolution. A higher weight indicates the catalog is preferred over lower-weighted catalogs.
6
Source types include the following:
  • grpc with an image reference: OLM pulls the image and runs the pod, which is expected to serve a compliant API.
  • grpc with an address field: OLM attempts to contact the gRPC API at the given address. This should not be used in most cases.
  • configmap: OLM parses config map data and runs a pod that can serve the gRPC API over it.
7
Automatically check for new versions at a given interval to stay up-to-date.
8
Last observed state of the catalog connection. For example:
  • READY: A connection is successfully established.
  • CONNECTING: A connection is attempting to establish.
  • TRANSIENT_FAILURE: A temporary problem has occurred while attempting to establish a connection, such as a timeout. The state will eventually switch back to CONNECTING and try again.

See States of Connectivity in the gRPC documentation for more details.

9
Latest time the container registry storing the catalog image was polled to ensure the image is up-to-date.
10
Status information for the catalog’s Operator Registry service.

Referencing the name of a CatalogSource object in a subscription instructs OLM where to search to find a requested Operator:

Example 2.2. Example Subscription object referencing a catalog source

apiVersion: operators.coreos.com/v1alpha1
kind: Subscription
metadata:
  name: example-operator
  namespace: example-namespace
spec:
  channel: stable
  name: example-operator
  source: example-catalog
  sourceNamespace: openshift-marketplace
2.4.1.2.3. Subscription

A subscription, defined by a Subscription object, represents an intention to install an Operator. It is the custom resource that relates an Operator to a catalog source.

Subscriptions describe which channel of an Operator package to subscribe to, and whether to perform updates automatically or manually. If set to automatic, the subscription ensures Operator Lifecycle Manager (OLM) manages and upgrades the Operator to ensure that the latest version is always running in the cluster.

Example Subscription object

apiVersion: operators.coreos.com/v1alpha1
kind: Subscription
metadata:
  name: example-operator
  namespace: example-namespace
spec:
  channel: stable
  name: example-operator
  source: example-catalog
  sourceNamespace: openshift-marketplace

This Subscription object defines the name and namespace of the Operator, as well as the catalog from which the Operator data can be found. The channel, such as alpha, beta, or stable, helps determine which Operator stream should be installed from the catalog source.

The names of channels in a subscription can differ between Operators, but the naming scheme should follow a common convention within a given Operator. For example, channel names might follow a minor release update stream for the application provided by the Operator (1.2, 1.3) or a release frequency (stable, fast).

In addition to being easily visible from the OpenShift Container Platform web console, it is possible to identify when there is a newer version of an Operator available by inspecting the status of the related subscription. The value associated with the currentCSV field is the newest version that is known to OLM, and installedCSV is the version that is installed on the cluster.

2.4.1.2.4. Install plan

An install plan, defined by an InstallPlan object, describes a set of resources that Operator Lifecycle Manager (OLM) creates to install or upgrade to a specific version of an Operator. The version is defined by a cluster service version (CSV).

To install an Operator, a cluster administrator, or a user who has been granted Operator installation permissions, must first create a Subscription object. A subscription represents the intent to subscribe to a stream of available versions of an Operator from a catalog source. The subscription then creates an InstallPlan object to facilitate the installation of the resources for the Operator.

The install plan must then be approved according to one of the following approval strategies:

  • If the subscription’s spec.installPlanApproval field is set to Automatic, the install plan is approved automatically.
  • If the subscription’s spec.installPlanApproval field is set to Manual, the install plan must be manually approved by a cluster administrator or user with proper permissions.

After the install plan is approved, OLM creates the specified resources and installs the Operator in the namespace that is specified by the subscription.

Example 2.3. Example InstallPlan object

apiVersion: operators.coreos.com/v1alpha1
kind: InstallPlan
metadata:
  name: install-abcde
  namespace: operators
spec:
  approval: Automatic
  approved: true
  clusterServiceVersionNames:
    - my-operator.v1.0.1
  generation: 1
status:
  ...
  catalogSources: []
  conditions:
    - lastTransitionTime: '2021-01-01T20:17:27Z'
      lastUpdateTime: '2021-01-01T20:17:27Z'
      status: 'True'
      type: Installed
  phase: Complete
  plan:
    - resolving: my-operator.v1.0.1
      resource:
        group: operators.coreos.com
        kind: ClusterServiceVersion
        manifest: >-
        ...
        name: my-operator.v1.0.1
        sourceName: redhat-operators
        sourceNamespace: openshift-marketplace
        version: v1alpha1
      status: Created
    - resolving: my-operator.v1.0.1
      resource:
        group: apiextensions.k8s.io
        kind: CustomResourceDefinition
        manifest: >-
        ...
        name: webservers.web.servers.org
        sourceName: redhat-operators
        sourceNamespace: openshift-marketplace
        version: v1beta1
      status: Created
    - resolving: my-operator.v1.0.1
      resource:
        group: ''
        kind: ServiceAccount
        manifest: >-
        ...
        name: my-operator
        sourceName: redhat-operators
        sourceNamespace: openshift-marketplace
        version: v1
      status: Created
    - resolving: my-operator.v1.0.1
      resource:
        group: rbac.authorization.k8s.io
        kind: Role
        manifest: >-
        ...
        name: my-operator.v1.0.1-my-operator-6d7cbc6f57
        sourceName: redhat-operators
        sourceNamespace: openshift-marketplace
        version: v1
      status: Created
    - resolving: my-operator.v1.0.1
      resource:
        group: rbac.authorization.k8s.io
        kind: RoleBinding
        manifest: >-
        ...
        name: my-operator.v1.0.1-my-operator-6d7cbc6f57
        sourceName: redhat-operators
        sourceNamespace: openshift-marketplace
        version: v1
      status: Created
      ...
2.4.1.2.5. Operator groups

An Operator group, defined by the OperatorGroup resource, provides multitenant configuration to OLM-installed Operators. An Operator group selects target namespaces in which to generate required RBAC access for its member Operators.

The set of target namespaces is provided by a comma-delimited string stored in the olm.targetNamespaces annotation of a cluster service version (CSV). This annotation is applied to the CSV instances of member Operators and is projected into their deployments.

Additional resources

2.4.1.2.6. Operator conditions

As part of its role in managing the lifecycle of an Operator, Operator Lifecycle Manager (OLM) infers the state of an Operator from the state of Kubernetes resources that define the Operator. While this approach provides some level of assurance that an Operator is in a given state, there are many instances where an Operator might need to communicate information to OLM that could not be inferred otherwise. This information can then be used by OLM to better manage the lifecycle of the Operator.

OLM provides a custom resource definition (CRD) called OperatorCondition that allows Operators to communicate conditions to OLM. There are a set of supported conditions that influence management of the Operator by OLM when present in the Spec.Conditions array of an OperatorCondition resource.

Note

By default, the Spec.Conditions array is not present in an OperatorCondition object until it is either added by a user or as a result of custom Operator logic.

Additional resources

2.4.2. Operator Lifecycle Manager architecture

This guide outlines the component architecture of Operator Lifecycle Manager (OLM) in OpenShift Container Platform.

2.4.2.1. Component responsibilities

Operator Lifecycle Manager (OLM) is composed of two Operators: the OLM Operator and the Catalog Operator.

Each of these Operators is responsible for managing the custom resource definitions (CRDs) that are the basis for the OLM framework:

Table 2.2. CRDs managed by OLM and Catalog Operators

ResourceShort nameOwnerDescription

ClusterServiceVersion (CSV)

csv

OLM

Application metadata: name, version, icon, required resources, installation, and so on.

InstallPlan

ip

Catalog

Calculated list of resources to be created to automatically install or upgrade a CSV.

CatalogSource

catsrc

Catalog

A repository of CSVs, CRDs, and packages that define an application.

Subscription

sub

Catalog

Used to keep CSVs up to date by tracking a channel in a package.

OperatorGroup

og

OLM

Configures all Operators deployed in the same namespace as the OperatorGroup object to watch for their custom resource (CR) in a list of namespaces or cluster-wide.

Each of these Operators is also responsible for creating the following resources:

Table 2.3. Resources created by OLM and Catalog Operators

ResourceOwner

Deployments

OLM

ServiceAccounts

(Cluster)Roles

(Cluster)RoleBindings

CustomResourceDefinitions (CRDs)

Catalog

ClusterServiceVersions

2.4.2.2. OLM Operator

The OLM Operator is responsible for deploying applications defined by CSV resources after the required resources specified in the CSV are present in the cluster.

The OLM Operator is not concerned with the creation of the required resources; you can choose to manually create these resources using the CLI or using the Catalog Operator. This separation of concern allows users incremental buy-in in terms of how much of the OLM framework they choose to leverage for their application.

The OLM Operator uses the following workflow:

  1. Watch for cluster service versions (CSVs) in a namespace and check that requirements are met.
  2. If requirements are met, run the install strategy for the CSV.

    Note

    A CSV must be an active member of an Operator group for the install strategy to run.

2.4.2.3. Catalog Operator

The Catalog Operator is responsible for resolving and installing cluster service versions (CSVs) and the required resources they specify. It is also responsible for watching catalog sources for updates to packages in channels and upgrading them, automatically if desired, to the latest available versions.

To track a package in a channel, you can create a Subscription object configuring the desired package, channel, and the CatalogSource object you want to use for pulling updates. When updates are found, an appropriate InstallPlan object is written into the namespace on behalf of the user.

The Catalog Operator uses the following workflow:

  1. Connect to each catalog source in the cluster.
  2. Watch for unresolved install plans created by a user, and if found:

    1. Find the CSV matching the name requested and add the CSV as a resolved resource.
    2. For each managed or required CRD, add the CRD as a resolved resource.
    3. For each required CRD, find the CSV that manages it.
  3. Watch for resolved install plans and create all of the discovered resources for it, if approved by a user or automatically.
  4. Watch for catalog sources and subscriptions and create install plans based on them.

2.4.2.4. Catalog Registry

The Catalog Registry stores CSVs and CRDs for creation in a cluster and stores metadata about packages and channels.

A package manifest is an entry in the Catalog Registry that associates a package identity with sets of CSVs. Within a package, channels point to a particular CSV. Because CSVs explicitly reference the CSV that they replace, a package manifest provides the Catalog Operator with all of the information that is required to update a CSV to the latest version in a channel, stepping through each intermediate version.

2.4.3. Operator Lifecycle Manager workflow

This guide outlines the workflow of Operator Lifecycle Manager (OLM) in OpenShift Container Platform.

2.4.3.1. Operator installation and upgrade workflow in OLM

In the Operator Lifecycle Manager (OLM) ecosystem, the following resources are used to resolve Operator installations and upgrades:

  • ClusterServiceVersion (CSV)
  • CatalogSource
  • Subscription

Operator metadata, defined in CSVs, can be stored in a collection called a catalog source. OLM uses catalog sources, which use the Operator Registry API, to query for available Operators as well as upgrades for installed Operators.

Figure 2.3. Catalog source overview

olm catalogsource

Within a catalog source, Operators are organized into packages and streams of updates called channels, which should be a familiar update pattern from OpenShift Container Platform or other software on a continuous release cycle like web browsers.

Figure 2.4. Packages and channels in a Catalog source

olm channels

A user indicates a particular package and channel in a particular catalog source in a subscription, for example an etcd package and its alpha channel. If a subscription is made to a package that has not yet been installed in the namespace, the latest Operator for that package is installed.

Note

OLM deliberately avoids version comparisons, so the "latest" or "newest" Operator available from a given catalogchannelpackage path does not necessarily need to be the highest version number. It should be thought of more as the head reference of a channel, similar to a Git repository.

Each CSV has a replaces parameter that indicates which Operator it replaces. This builds a graph of CSVs that can be queried by OLM, and updates can be shared between channels. Channels can be thought of as entry points into the graph of updates:

Figure 2.5. OLM graph of available channel updates

olm replaces

Example channels in a package

packageName: example
channels:
- name: alpha
  currentCSV: example.v0.1.2
- name: beta
  currentCSV: example.v0.1.3
defaultChannel: alpha

For OLM to successfully query for updates, given a catalog source, package, channel, and CSV, a catalog must be able to return, unambiguously and deterministically, a single CSV that replaces the input CSV.

2.4.3.1.1. Example upgrade path

For an example upgrade scenario, consider an installed Operator corresponding to CSV version 0.1.1. OLM queries the catalog source and detects an upgrade in the subscribed channel with new CSV version 0.1.3 that replaces an older but not-installed CSV version 0.1.2, which in turn replaces the older and installed CSV version 0.1.1.

OLM walks back from the channel head to previous versions via the replaces field specified in the CSVs to determine the upgrade path 0.1.30.1.20.1.1; the direction of the arrow indicates that the former replaces the latter. OLM upgrades the Operator one version at the time until it reaches the channel head.

For this given scenario, OLM installs Operator version 0.1.2 to replace the existing Operator version 0.1.1. Then, it installs Operator version 0.1.3 to replace the previously installed Operator version 0.1.2. At this point, the installed operator version 0.1.3 matches the channel head and the upgrade is completed.

2.4.3.1.2. Skipping upgrades

The basic path for upgrades in OLM is:

  • A catalog source is updated with one or more updates to an Operator.
  • OLM traverses every version of the Operator until reaching the latest version the catalog source contains.

However, sometimes this is not a safe operation to perform. There will be cases where a published version of an Operator should never be installed on a cluster if it has not already, for example because a version introduces a serious vulnerability.

In those cases, OLM must consider two cluster states and provide an update graph that supports both:

  • The "bad" intermediate Operator has been seen by the cluster and installed.
  • The "bad" intermediate Operator has not yet been installed onto the cluster.

By shipping a new catalog and adding a skipped release, OLM is ensured that it can always get a single unique update regardless of the cluster state and whether it has seen the bad update yet.

Example CSV with skipped release

apiVersion: operators.coreos.com/v1alpha1
kind: ClusterServiceVersion
metadata:
  name: etcdoperator.v0.9.2
  namespace: placeholder
  annotations:
spec:
    displayName: etcd
    description: Etcd Operator
    replaces: etcdoperator.v0.9.0
    skips:
    - etcdoperator.v0.9.1

Consider the following example of Old CatalogSource and New CatalogSource.

Figure 2.6. Skipping updates

olm skipping updates

This graph maintains that:

  • Any Operator found in Old CatalogSource has a single replacement in New CatalogSource.
  • Any Operator found in New CatalogSource has a single replacement in New CatalogSource.
  • If the bad update has not yet been installed, it will never be.
2.4.3.1.3. Replacing multiple Operators

Creating New CatalogSource as described requires publishing CSVs that replace one Operator, but can skip several. This can be accomplished using the skipRange annotation:

olm.skipRange: <semver_range>

where <semver_range> has the version range format supported by the semver library.

When searching catalogs for updates, if the head of a channel has a skipRange annotation and the currently installed Operator has a version field that falls in the range, OLM updates to the latest entry in the channel.

The order of precedence is:

  1. Channel head in the source specified by sourceName on the subscription, if the other criteria for skipping are met.
  2. The next Operator that replaces the current one, in the source specified by sourceName.
  3. Channel head in another source that is visible to the subscription, if the other criteria for skipping are met.
  4. The next Operator that replaces the current one in any source visible to the subscription.

Example CSV with skipRange

apiVersion: operators.coreos.com/v1alpha1
kind: ClusterServiceVersion
metadata:
    name: elasticsearch-operator.v4.1.2
    namespace: <namespace>
    annotations:
        olm.skipRange: '>=4.1.0 <4.1.2'

2.4.3.1.4. Z-stream support

A z-stream, or patch release, must replace all previous z-stream releases for the same minor version. OLM does not consider major, minor, or patch versions, it just needs to build the correct graph in a catalog.

In other words, OLM must be able to take a graph as in Old CatalogSource and, similar to before, generate a graph as in New CatalogSource:

Figure 2.7. Replacing several Operators

olm z stream

This graph maintains that:

  • Any Operator found in Old CatalogSource has a single replacement in New CatalogSource.
  • Any Operator found in New CatalogSource has a single replacement in New CatalogSource.
  • Any z-stream release in Old CatalogSource will update to the latest z-stream release in New CatalogSource.
  • Unavailable releases can be considered "virtual" graph nodes; their content does not need to exist, the registry just needs to respond as if the graph looks like this.

2.4.4. Operator Lifecycle Manager dependency resolution

This guide outlines dependency resolution and custom resource definition (CRD) upgrade lifecycles with Operator Lifecycle Manager (OLM) in OpenShift Container Platform.

2.4.4.1. About dependency resolution

OLM manages the dependency resolution and upgrade lifecycle of running Operators. In many ways, the problems OLM faces are similar to other operating system package managers like yum and rpm.

However, there is one constraint that similar systems do not generally have that OLM does: because Operators are always running, OLM attempts to ensure that you are never left with a set of Operators that do not work with each other.

This means that OLM must never do the following:

  • Install a set of Operators that require APIs that cannot be provided.
  • Update an Operator in a way that breaks another that depends upon it.

2.4.4.2. Dependencies file

The dependencies of an Operator are listed in a dependencies.yaml file in the metadata/ folder of a bundle. This file is optional and currently only used to specify explicit Operator-version dependencies.

The dependency list contains a type field for each item to specify what kind of dependency this is. There are two supported types of Operator dependencies:

  • olm.package: This type indicates a dependency for a specific Operator version. The dependency information must include the package name and the version of the package in semver format. For example, you can specify an exact version such as 0.5.2 or a range of versions such as >0.5.1.
  • olm.gvk: With a gvk type, the author can specify a dependency with group/version/kind (GVK) information, similar to existing CRD and API-based usage in a CSV. This is a path to enable Operator authors to consolidate all dependencies, API or explicit versions, to be in the same place.

In the following example, dependencies are specified for a Prometheus Operator and etcd CRDs:

Example dependencies.yaml file

dependencies:
  - type: olm.package
    value:
      packageName: prometheus
      version: ">0.27.0"
  - type: olm.gvk
    value:
      group: etcd.database.coreos.com
      kind: EtcdCluster
      version: v1beta2

2.4.4.3. Dependency preferences

There can be many options that equally satisfy a dependency of an Operator. The dependency resolver in Operator Lifecycle Manager (OLM) determines which option best fits the requirements of the requested Operator. As an Operator author or user, it can be important to understand how these choices are made so that dependency resolution is clear.

2.4.4.3.1. Catalog priority

On OpenShift Container Platform cluster, OLM reads catalog sources to know which Operators are available for installation.

Example CatalogSource object

apiVersion: "operators.coreos.com/v1alpha1"
kind: "CatalogSource"
metadata:
  name: "my-operators"
  namespace: "operators"
spec:
  sourceType: grpc
  image: example.com/my/operator-index:v1
  displayName: "My Operators"
  priority: 100

A CatalogSource object has a priority field, which is used by the resolver to know how to prefer options for a dependency.

There are two rules that govern catalog preference:

  • Options in higher-priority catalogs are preferred to options in lower-priority catalogs.
  • Options in the same catalog as the dependent are preferred to any other catalogs.
2.4.4.3.2. Channel ordering

An Operator package in a catalog is a collection of update channels that a user can subscribe to in a OpenShift Container Platform cluster. Channels can be used to provide a particular stream of updates for a minor release (1.2, 1.3) or a release frequency (stable, fast).

It is likely that a dependency might be satisfied by Operators in the same package, but different channels. For example, version 1.2 of an Operator might exist in both the stable and fast channels.

Each package has a default channel, which is always preferred to non-default channels. If no option in the default channel can satisfy a dependency, options are considered from the remaining channels in lexicographic order of the channel name.

2.4.4.3.3. Order within a channel

There are almost always multiple options to satisfy a dependency within a single channel. For example, Operators in one package and channel provide the same set of APIs.

When a user creates a subscription, they indicate which channel to receive updates from. This immediately reduces the search to just that one channel. But within the channel, it is likely that many Operators satisfy a dependency.

Within a channel, newer Operators that are higher up in the update graph are preferred. If the head of a channel satisfies a dependency, it will be tried first.

2.4.4.3.4. Other constraints

In addition to the constraints supplied by package dependencies, OLM includes additional constraints to represent the desired user state and enforce resolution invariants.

2.4.4.3.4.1. Subscription constraint

A subscription constraint filters the set of Operators that can satisfy a subscription. Subscriptions are user-supplied constraints for the dependency resolver. They declare the intent to either install a new Operator if it is not already on the cluster, or to keep an existing Operator updated.

2.4.4.3.4.2. Package constraint

Within a namespace, no two Operators may come from the same package.

2.4.4.4. CRD upgrades

OLM upgrades a custom resource definition (CRD) immediately if it is owned by a singular cluster service version (CSV). If a CRD is owned by multiple CSVs, then the CRD is upgraded when it has satisfied all of the following backward compatible conditions:

  • All existing serving versions in the current CRD are present in the new CRD.
  • All existing instances, or custom resources, that are associated with the serving versions of the CRD are valid when validated against the validation schema of the new CRD.

2.4.4.5. Dependency best practices

When specifying dependencies, there are best practices you should consider.

Depend on APIs or a specific version range of Operators
Operators can add or remove APIs at any time; always specify an olm.gvk dependency on any APIs your Operators requires. The exception to this is if you are specifying olm.package constraints instead.
Set a minimum version

The Kubernetes documentation on API changes describes what changes are allowed for Kubernetes-style Operators. These versioning conventions allow an Operator to update an API without bumping the API version, as long as the API is backwards-compatible.

For Operator dependencies, this means that knowing the API version of a dependency might not be enough to ensure the dependent Operator works as intended.

For example:

  • TestOperator v1.0.0 provides v1alpha1 API version of the MyObject resource.
  • TestOperator v1.0.1 adds a new field spec.newfield to MyObject, but still at v1alpha1.

Your Operator might require the ability to write spec.newfield into the MyObject resource. An olm.gvk constraint alone is not enough for OLM to determine that you need TestOperator v1.0.1 and not TestOperator v1.0.0.

Whenever possible, if a specific Operator that provides an API is known ahead of time, specify an additional olm.package constraint to set a minimum.

Omit a maximum version or allow a very wide range

Because Operators provide cluster-scoped resources such as API services and CRDs, an Operator that specifies a small window for a dependency might unnecessarily constrain updates for other consumers of that dependency.

Whenever possible, do not set a maximum version. Alternatively, set a very wide semantic range to prevent conflicts with other Operators. For example, >1.0.0 <2.0.0.

Unlike with conventional package managers, Operator authors explicitly encode that updates are safe through channels in OLM. If an update is available for an existing subscription, it is assumed that the Operator author is indicating that it can update from the previous version. Setting a maximum version for a dependency overrides the update stream of the author by unnecessarily truncating it at a particular upper bound.

Note

Cluster administrators cannot override dependencies set by an Operator author.

However, maximum versions can and should be set if there are known incompatibilities that must be avoided. Specific versions can be omitted with the version range syntax, for example > 1.0.0 !1.2.1.

Additional resources

2.4.4.6. Dependency caveats

When specifying dependencies, there are caveats you should consider.

No compound constraints (AND)

There is currently no method for specifying an AND relationship between constraints. In other words, there is no way to specify that one Operator depends on another Operator that both provides a given API and has version >1.1.0.

This means that when specifying a dependency such as:

dependencies:
- type: olm.package
  value:
    packageName: etcd
    version: ">3.1.0"
- type: olm.gvk
  value:
    group: etcd.database.coreos.com
    kind: EtcdCluster
    version: v1beta2

It would be possible for OLM to satisfy this with two Operators: one that provides EtcdCluster and one that has version >3.1.0. Whether that happens, or whether an Operator is selected that satisfies both constraints, depends on the ordering that potential options are visited. Dependency preferences and ordering options are well-defined and can be reasoned about, but to exercise caution, Operators should stick to one mechanism or the other.

Cross-namespace compatibility
OLM performs dependency resolution at the namespace scope. It is possible to get into an update deadlock if updating an Operator in one namespace would be an issue for an Operator in another namespace, and vice-versa.

2.4.4.7. Example dependency resolution scenarios

In the following examples, a provider is an Operator which "owns" a CRD or API service.

Example: Deprecating dependent APIs

A and B are APIs (CRDs):

  • The provider of A depends on B.
  • The provider of B has a subscription.
  • The provider of B updates to provide C but deprecates B.

This results in:

  • B no longer has a provider.
  • A no longer works.

This is a case OLM prevents with its upgrade strategy.

Example: Version deadlock

A and B are APIs:

  • The provider of A requires B.
  • The provider of B requires A.
  • The provider of A updates to (provide A2, require B2) and deprecate A.
  • The provider of B updates to (provide B2, require A2) and deprecate B.

If OLM attempts to update A without simultaneously updating B, or vice-versa, it is unable to progress to new versions of the Operators, even though a new compatible set can be found.

This is another case OLM prevents with its upgrade strategy.

2.4.5. Operator groups

This guide outlines the use of Operator groups with Operator Lifecycle Manager (OLM) in OpenShift Container Platform.

2.4.5.1. About Operator groups

An Operator group, defined by the OperatorGroup resource, provides multitenant configuration to OLM-installed Operators. An Operator group selects target namespaces in which to generate required RBAC access for its member Operators.

The set of target namespaces is provided by a comma-delimited string stored in the olm.targetNamespaces annotation of a cluster service version (CSV). This annotation is applied to the CSV instances of member Operators and is projected into their deployments.

2.4.5.2. Operator group membership

An Operator is considered a member of an Operator group if the following conditions are true:

  • The CSV of the Operator exists in the same namespace as the Operator group.
  • The install modes in the CSV of the Operator support the set of namespaces targeted by the Operator group.

An install mode in a CSV consists of an InstallModeType field and a boolean Supported field. The spec of a CSV can contain a set of install modes of four distinct InstallModeTypes:

Table 2.4. Install modes and supported Operator groups

InstallModeTypeDescription

OwnNamespace

The Operator can be a member of an Operator group that selects its own namespace.

SingleNamespace

The Operator can be a member of an Operator group that selects one namespace.

MultiNamespace

The Operator can be a member of an Operator group that selects more than one namespace.

AllNamespaces

The Operator can be a member of an Operator group that selects all namespaces (target namespace set is the empty string "").

Note

If the spec of a CSV omits an entry of InstallModeType, then that type is considered unsupported unless support can be inferred by an existing entry that implicitly supports it.

2.4.5.3. Target namespace selection

You can explicitly name the target namespace for an Operator group using the spec.targetNamespaces parameter:

apiVersion: operators.coreos.com/v1
kind: OperatorGroup
metadata:
  name: my-group
  namespace: my-namespace
spec:
  targetNamespaces:
  - my-namespace

You can alternatively specify a namespace using a label selector with the spec.selector parameter:

apiVersion: operators.coreos.com/v1
kind: OperatorGroup
metadata:
  name: my-group
  namespace: my-namespace
spec:
  selector:
    cool.io/prod: "true"
Important

Listing multiple namespaces via spec.targetNamespaces or use of a label selector via spec.selector is not recommended, as the support for more than one target namespace in an Operator group will likely be removed in a future release.

If both spec.targetNamespaces and spec.selector are defined, spec.selector is ignored. Alternatively, you can omit both spec.selector and spec.targetNamespaces to specify a global Operator group, which selects all namespaces:

apiVersion: operators.coreos.com/v1
kind: OperatorGroup
metadata:
  name: my-group
  namespace: my-namespace

The resolved set of selected namespaces is shown in the status.namespaces parameter of an Opeator group. The status.namespace of a global Operator group contains the empty string (""), which signals to a consuming Operator that it should watch all namespaces.

2.4.5.4. Operator group CSV annotations

Member CSVs of an Operator group have the following annotations:

AnnotationDescription

olm.operatorGroup=<group_name>

Contains the name of the Operator group.

olm.operatorNamespace=<group_namespace>

Contains the namespace of the Operator group.

olm.targetNamespaces=<target_namespaces>

Contains a comma-delimited string that lists the target namespace selection of the Operator group.

Note

All annotations except olm.targetNamespaces are included with copied CSVs. Omitting the olm.targetNamespaces annotation on copied CSVs prevents the duplication of target namespaces between tenants.

2.4.5.5. Provided APIs annotation

A group/version/kind (GVK) is a unique identifier for a Kubernetes API. Information about what GVKs are provided by an Operator group are shown in an olm.providedAPIs annotation. The value of the annotation is a string consisting of <kind>.<version>.<group> delimited with commas. The GVKs of CRDs and API services provided by all active member CSVs of an Operator group are included.

Review the following example of an OperatorGroup object with a single active member CSV that provides the PackageManifest resource:

apiVersion: operators.coreos.com/v1
kind: OperatorGroup
metadata:
  annotations:
    olm.providedAPIs: PackageManifest.v1alpha1.packages.apps.redhat.com
  name: olm-operators
  namespace: local
  ...
spec:
  selector: {}
  serviceAccount:
    metadata:
      creationTimestamp: null
  targetNamespaces:
  - local
status:
  lastUpdated: 2019-02-19T16:18:28Z
  namespaces:
  - local

2.4.5.6. Role-based access control

When an Operator group is created, three cluster roles are generated. Each contains a single aggregation rule with a cluster role selector set to match a label, as shown below:

Cluster roleLabel to match

<operatorgroup_name>-admin

olm.opgroup.permissions/aggregate-to-admin: <operatorgroup_name>

<operatorgroup_name>-edit

olm.opgroup.permissions/aggregate-to-edit: <operatorgroup_name>

<operatorgroup_name>-view

olm.opgroup.permissions/aggregate-to-view: <operatorgroup_name>

The following RBAC resources are generated when a CSV becomes an active member of an Operator group, as long as the CSV is watching all namespaces with the AllNamespaces install mode and is not in a failed state with reason InterOperatorGroupOwnerConflict:

  • Cluster roles for each API resource from a CRD
  • Cluster roles for each API resource from an API service
  • Additional roles and role bindings

Table 2.5. Cluster roles generated for each API resource from a CRD

Cluster roleSettings

<kind>.<group>-<version>-admin

Verbs on <kind>:

  • *

Aggregation labels:

  • rbac.authorization.k8s.io/aggregate-to-admin: true
  • olm.opgroup.permissions/aggregate-to-admin: <operatorgroup_name>

<kind>.<group>-<version>-edit

Verbs on <kind>:

  • create
  • update
  • patch
  • delete

Aggregation labels:

  • rbac.authorization.k8s.io/aggregate-to-edit: true
  • olm.opgroup.permissions/aggregate-to-edit: <operatorgroup_name>

<kind>.<group>-<version>-view

Verbs on <kind>:

  • get
  • list
  • watch

Aggregation labels:

  • rbac.authorization.k8s.io/aggregate-to-view: true
  • olm.opgroup.permissions/aggregate-to-view: <operatorgroup_name>

<kind>.<group>-<version>-view-crdview

Verbs on apiextensions.k8s.io customresourcedefinitions <crd-name>:

  • get

Aggregation labels:

  • rbac.authorization.k8s.io/aggregate-to-view: true
  • olm.opgroup.permissions/aggregate-to-view: <operatorgroup_name>

Table 2.6. Cluster roles generated for each API resource from an API service

Cluster roleSettings

<kind>.<group>-<version>-admin

Verbs on <kind>:

  • *

Aggregation labels:

  • rbac.authorization.k8s.io/aggregate-to-admin: true
  • olm.opgroup.permissions/aggregate-to-admin: <operatorgroup_name>

<kind>.<group>-<version>-edit

Verbs on <kind>:

  • create
  • update
  • patch
  • delete

Aggregation labels:

  • rbac.authorization.k8s.io/aggregate-to-edit: true
  • olm.opgroup.permissions/aggregate-to-edit: <operatorgroup_name>

<kind>.<group>-<version>-view

Verbs on <kind>:

  • get
  • list
  • watch

Aggregation labels:

  • rbac.authorization.k8s.io/aggregate-to-view: true
  • olm.opgroup.permissions/aggregate-to-view: <operatorgroup_name>

Additional roles and role bindings

  • If the CSV defines exactly one target namespace that contains *, then a cluster role and corresponding cluster role binding are generated for each permission defined in the permissions field of the CSV. All resources generated are given the olm.owner: <csv_name> and olm.owner.namespace: <csv_namespace> labels.
  • If the CSV does not define exactly one target namespace that contains *, then all roles and role bindings in the Operator namespace with the olm.owner: <csv_name> and olm.owner.namespace: <csv_namespace> labels are copied into the target namespace.

2.4.5.7. Copied CSVs

OLM creates copies of all active member CSVs of an Operator group in each of the target namespaces of that Operator group. The purpose of a copied CSV is to tell users of a target namespace that a specific Operator is configured to watch resources created there.

Copied CSVs have a status reason Copied and are updated to match the status of their source CSV. The olm.targetNamespaces annotation is stripped from copied CSVs before they are created on the cluster. Omitting the target namespace selection avoids the duplication of target namespaces between tenants.

Copied CSVs are deleted when their source CSV no longer exists or the Operator group that their source CSV belongs to no longer targets the namespace of the copied CSV.

2.4.5.8. Static Operator groups

An Operator group is static if its spec.staticProvidedAPIs field is set to true. As a result, OLM does not modify the olm.providedAPIs annotation of an Operator group, which means that it can be set in advance. This is useful when a user wants to use an Operator group to prevent resource contention in a set of namespaces but does not have active member CSVs that provide the APIs for those resources.

Below is an example of an Operator group that protects Prometheus resources in all namespaces with the something.cool.io/cluster-monitoring: "true" annotation:

apiVersion: operators.coreos.com/v1
kind: OperatorGroup
metadata:
  name: cluster-monitoring
  namespace: cluster-monitoring
  annotations:
    olm.providedAPIs: Alertmanager.v1.monitoring.coreos.com,Prometheus.v1.monitoring.coreos.com,PrometheusRule.v1.monitoring.coreos.com,ServiceMonitor.v1.monitoring.coreos.com
spec:
  staticProvidedAPIs: true
  selector:
    matchLabels:
      something.cool.io/cluster-monitoring: "true"

2.4.5.9. Operator group intersection

Two Operator groups are said to have intersecting provided APIs if the intersection of their target namespace sets is not an empty set and the intersection of their provided API sets, defined by olm.providedAPIs annotations, is not an empty set.

A potential issue is that Operator groups with intersecting provided APIs can compete for the same resources in the set of intersecting namespaces.

Note

When checking intersection rules, an Operator group namespace is always included as part of its selected target namespaces.

Rules for intersection

Each time an active member CSV synchronizes, OLM queries the cluster for the set of intersecting provided APIs between the Operator group of the CSV and all others. OLM then checks if that set is an empty set:

  • If true and the CSV’s provided APIs are a subset of the Operator group’s:

    • Continue transitioning.
  • If true and the CSV’s provided APIs are not a subset of the Operator group’s:

    • If the Operator group is static:

      • Clean up any deployments that belong to the CSV.
      • Transition the CSV to a failed state with status reason CannotModifyStaticOperatorGroupProvidedAPIs.
    • If the Operator group is not static:

      • Replace the Operator group’s olm.providedAPIs annotation with the union of itself and the CSV’s provided APIs.
  • If false and the CSV’s provided APIs are not a subset of the Operator group’s:

    • Clean up any deployments that belong to the CSV.
    • Transition the CSV to a failed state with status reason InterOperatorGroupOwnerConflict.
  • If false and the CSV’s provided APIs are a subset of the Operator group’s:

    • If the Operator group is static:

      • Clean up any deployments that belong to the CSV.
      • Transition the CSV to a failed state with status reason CannotModifyStaticOperatorGroupProvidedAPIs.
    • If the Operator group is not static:

      • Replace the Operator group’s olm.providedAPIs annotation with the difference between itself and the CSV’s provided APIs.
Note

Failure states caused by Operator groups are non-terminal.

The following actions are performed each time an Operator group synchronizes:

  • The set of provided APIs from active member CSVs is calculated from the cluster. Note that copied CSVs are ignored.
  • The cluster set is compared to olm.providedAPIs, and if olm.providedAPIs contains any extra APIs, then those APIs are pruned.
  • All CSVs that provide the same APIs across all namespaces are requeued. This notifies conflicting CSVs in intersecting groups that their conflict has possibly been resolved, either through resizing or through deletion of the conflicting CSV.

2.4.5.10. Limitations for multi-tenant Operator management

OpenShift Container Platform provides limited support for simultaneously installing different variations of an Operator on a cluster. Operators are control plane extensions. All tenants, or namespaces, share the same control plane of a cluster. Therefore, tenants in a multi-tenant environment also have to share Operators.

The Operator Lifecycle Manager (OLM) installs Operators multiple times in different namespaces. One constraint of this is that the Operator’s API versions must be the same.

Different major versions of an Operator often have incompatible custom resource definitions (CRDs). This makes it difficult to quickly verify OLMs.

2.4.5.10.1. Additional resources

2.4.5.11. Troubleshooting Operator groups

Membership
  • An install plan’s namespace must contain only one Operator group. When attempting to generate a cluster service version (CSV) in a namespace, an install plan considers an Operator group invalid in the following scenarios:

    • No Operator groups exist in the install plan’s namespace.
    • Multiple Operator groups exist in the install plan’s namespace.
    • An incorrect or non-existent service account name is specified in the Operator group.

    If an install plan encounters an invalid Operator group, the CSV is not generated and the InstallPlan resource fails with a relevant message. For example, the following message is provided if more than one Operator group exists in the same namespace:

    attenuated service account query failed - more than one operator group(s) are managing this namespace count=2

    where count= specifies the number of Operator groups in the namespace.

  • If the install modes of a CSV do not support the target namespace selection of the Operator group in its namespace, the CSV transitions to a failure state with the reason UnsupportedOperatorGroup. CSVs in a failed state for this reason transition to pending after either the target namespace selection of the Operator group changes to a supported configuration, or the install modes of the CSV are modified to support the target namespace selection.

2.4.6. Operator conditions

This guide outlines how Operator Lifecycle Manager (OLM) uses Operator conditions.

2.4.6.1. About Operator conditions

As part of its role in managing the lifecycle of an Operator, Operator Lifecycle Manager (OLM) infers the state of an Operator from the state of Kubernetes resources that define the Operator. While this approach provides some level of assurance that an Operator is in a given state, there are many instances where an Operator might need to communicate information to OLM that could not be inferred otherwise. This information can then be used by OLM to better manage the lifecycle of the Operator.

OLM provides a custom resource definition (CRD) called OperatorCondition that allows Operators to communicate conditions to OLM. There are a set of supported conditions that influence management of the Operator by OLM when present in the Spec.Conditions array of an OperatorCondition resource.

Note

By default, the Spec.Conditions array is not present in an OperatorCondition object until it is either added by a user or as a result of custom Operator logic.

2.4.6.2. Supported conditions

Operator Lifecycle Manager (OLM) supports the following Operator conditions.

2.4.6.2.1. Upgradeable condition

The Upgradeable Operator condition prevents an existing cluster service version (CSV) from being replaced by a newer version of the CSV. This condition is useful when:

  • An Operator is about to start a critical process and should not be upgraded until the process is completed.
  • An Operator is performing a migration of custom resources (CRs) that must be completed before the Operator is ready to be upgraded.

Example Upgradeable Operator condition

apiVersion: operators.coreos.com/v1
kind: OperatorCondition
metadata:
  name: my-operator
  namespace: operators
spec:
  conditions:
  - type: Upgradeable 1
    status: "False" 2
    reason: "migration"
    message: "The Operator is performing a migration."
    lastTransitionTime: "2020-08-24T23:15:55Z"

1
Name of the condition.
2
A False value indicates the Operator is not ready to be upgraded. OLM prevents a CSV that replaces the existing CSV of the Operator from leaving the Pending phase.

2.4.6.3. Additional resources

2.4.7. Operator Lifecycle Manager metrics

2.4.7.1. Exposed metrics

Operator Lifecycle Manager (OLM) exposes certain OLM-specific resources for use by the Prometheus-based OpenShift Container Platform cluster monitoring stack.

Table 2.7. Metrics exposed by OLM

NameDescription

catalog_source_count

Number of catalog sources.

csv_abnormal

When reconciling a cluster service version (CSV), present whenever a CSV version is in any state other than Succeeded, for example when it is not installed. Includes the name, namespace, phase, reason, and version labels. A Prometheus alert is created when this metric is present.

csv_count

Number of CSVs successfully registered.

csv_succeeded

When reconciling a CSV, represents whether a CSV version is in a Succeeded state (value 1) or not (value 0). Includes the name, namespace, and version labels.

csv_upgrade_count

Monotonic count of CSV upgrades.

install_plan_count

Number of install plans.

subscription_count

Number of subscriptions.

subscription_sync_total

Monotonic count of subscription syncs. Includes the channel, installed CSV, and subscription name labels.

2.4.8. Webhook management in Operator Lifecycle Manager

Webhooks allow Operator authors to intercept, modify, and accept or reject resources before they are saved to the object store and handled by the Operator controller. Operator Lifecycle Manager (OLM) can manage the lifecycle of these webhooks when they are shipped alongside your Operator.

See Defining cluster service versions (CSVs) for details on how an Operator developer can define webhooks for their Operator, as well as considerations when running on OLM.

2.4.8.1. Additional resources

2.5. Understanding OperatorHub

2.5.1. About OperatorHub

OperatorHub is the web console interface in OpenShift Container Platform that cluster administrators use to discover and install Operators. With one click, an Operator can be pulled from its off-cluster source, installed and subscribed on the cluster, and made ready for engineering teams to self-service manage the product across deployment environments using Operator Lifecycle Manager (OLM).

Cluster administrators can choose from catalogs grouped into the following categories:

CategoryDescription

Red Hat Operators

Red Hat products packaged and shipped by Red Hat. Supported by Red Hat.

Certified Operators

Products from leading independent software vendors (ISVs). Red Hat partners with ISVs to package and ship. Supported by the ISV.

Red Hat Marketplace

Certified software that can be purchased from Red Hat Marketplace.

Community Operators

Optionally-visible software maintained by relevant representatives in the redhat-openshift-ecosystem/community-operators-prod/operators GitHub repository. No official support.

Custom Operators

Operators you add to the cluster yourself. If you have not added any custom Operators, the Custom category does not appear in the web console on your OperatorHub.

Operators on OperatorHub are packaged to run on OLM. This includes a YAML file called a cluster service version (CSV) containing all of the CRDs, RBAC rules, deployments, and container images required to install and securely run the Operator. It also contains user-visible information like a description of its features and supported Kubernetes versions.

The Operator SDK can be used to assist developers packaging their Operators for use on OLM and OperatorHub. If you have a commercial application that you want to make accessible to your customers, get it included using the certification workflow provided on the Red Hat Partner Connect portal at connect.redhat.com.

2.5.2. OperatorHub architecture

The OperatorHub UI component is driven by the Marketplace Operator by default on OpenShift Container Platform in the openshift-marketplace namespace.

2.5.2.1. OperatorHub custom resource

The Marketplace Operator manages an OperatorHub custom resource (CR) named cluster that manages the default CatalogSource objects provided with OperatorHub. You can modify this resource to enable or disable the default catalogs, which is useful when configuring OpenShift Container Platform in restricted network environments.

Example OperatorHub custom resource

apiVersion: config.openshift.io/v1
kind: OperatorHub
metadata:
  name: cluster
spec:
  disableAllDefaultSources: true 1
  sources: [ 2
    {
      name: "community-operators",
      disabled: false
    }
  ]

1
disableAllDefaultSources is an override that controls availability of all default catalogs that are configured by default during an OpenShift Container Platform installation.
2
Disable default catalogs individually by changing the disabled parameter value per source.

2.5.3. Additional resources

2.6. Red Hat-provided Operator catalogs

2.6.1. About Operator catalogs

An Operator catalog is a repository of metadata that Operator Lifecycle Manager (OLM) can query to discover and install Operators and their dependencies on a cluster. OLM always installs Operators from the latest version of a catalog. As of OpenShift Container Platform 4.6, Red Hat-provided catalogs are distributed using index images.

An index image, based on the Operator bundle format, is a containerized snapshot of a catalog. It is an immutable artifact that contains the database of pointers to a set of Operator manifest content. A catalog can reference an index image to source its content for OLM on the cluster.

As catalogs are updated, the latest versions of Operators change, and older versions may be removed or altered. In addition, when OLM runs on an OpenShift Container Platform cluster in a restricted network environment, it is unable to access the catalogs directly from the internet to pull the latest content.

As a cluster administrator, you can create your own custom index image, either based on a Red Hat-provided catalog or from scratch, which can be used to source the catalog content on the cluster. Creating and updating your own index image provides a method for customizing the set of Operators available on the cluster, while also avoiding the aforementioned restricted network environment issues.

Important

Kubernetes periodically deprecates certain APIs that are removed in subsequent releases. As a result, Operators are unable to use removed APIs starting with the version of OpenShift Container Platform that uses the Kubernetes version that removed the API.

If your cluster is using custom catalogs, see Controlling Operator compatibility with OpenShift Container Platform versions for more details about how Operator authors can update their projects to help avoid workload issues and prevent incompatible upgrades.

Note

Support for the legacy package manifest format for Operators, including custom catalogs that were using the legacy format, is removed in OpenShift Container Platform 4.8 and later.

When creating custom catalog images, previous versions of OpenShift Container Platform 4 required using the oc adm catalog build command, which was deprecated for several releases and is now removed. With the availability of Red Hat-provided index images starting in OpenShift Container Platform 4.6, catalog builders must use the opm index command to manage index images.

2.6.2. About Red Hat-provided Operator catalogs

The Red Hat-provided catalog sources are installed by default in the openshift-marketplace namespace, which makes the catalogs available cluster-wide in all namespaces.

The following Operator catalogs are distributed by Red Hat:

CatalogIndex imageDescription

redhat-operators

registry.redhat.io/redhat/redhat-operator-index:v4.8

Red Hat products packaged and shipped by Red Hat. Supported by Red Hat.

certified-operators

registry.redhat.io/redhat/certified-operator-index:v4.8

Products from leading independent software vendors (ISVs). Red Hat partners with ISVs to package and ship. Supported by the ISV.

redhat-marketplace

registry.redhat.io/redhat/redhat-marketplace-index:v4.8

Certified software that can be purchased from Red Hat Marketplace.

community-operators

registry.redhat.io/redhat/community-operator-index:v4.8

Software maintained by relevant representatives in the redhat-openshift-ecosystem/community-operators-prod/operators GitHub repository. No official support.

2.7. CRDs

2.7.1. Extending the Kubernetes API with custom resource definitions

Operators use the Kubernetes extension mechanism, custom resource definitions (CRDs), so that custom objects managed by the Operator look and act just like the built-in, native Kubernetes objects. This guide describes how cluster administrators can extend their OpenShift Container Platform cluster by creating and managing CRDs.

2.7.1.1. Custom resource definitions

In the Kubernetes API, a resource is an endpoint that stores a collection of API objects of a certain kind. For example, the built-in Pods resource contains a collection of Pod objects.

A custom resource definition (CRD) object defines a new, unique object type, called a kind, in the cluster and lets the Kubernetes API server handle its entire lifecycle.

Custom resource (CR) objects are created from CRDs that have been added to the cluster by a cluster administrator, allowing all cluster users to add the new resource type into projects.

When a cluster administrator adds a new CRD to the cluster, the Kubernetes API server reacts by creating a new RESTful resource path that can be accessed by the entire cluster or a single project (namespace) and begins serving the specified CR.

Cluster administrators that want to grant access to the CRD to other users can use cluster role aggregation to grant access to users with the admin, edit, or view default cluster roles. Cluster role aggregation allows the insertion of custom policy rules into these cluster roles. This behavior integrates the new resource into the RBAC policy of the cluster as if it was a built-in resource.

Operators in particular make use of CRDs by packaging them with any required RBAC policy and other software-specific logic. Cluster administrators can also add CRDs manually to the cluster outside of the lifecycle of an Operator, making them available to all users.

Note

While only cluster administrators can create CRDs, developers can create the CR from an existing CRD if they have read and write permission to it.

2.7.1.2. Creating a custom resource definition

To create custom resource (CR) objects, cluster administrators must first create a custom resource definition (CRD).

Prerequisites

  • Access to an OpenShift Container Platform cluster with cluster-admin user privileges.

Procedure

To create a CRD:

  1. Create a YAML file that contains the following field types:

    Example YAML file for a CRD

    apiVersion: apiextensions.k8s.io/v1 1
    kind: CustomResourceDefinition
    metadata:
      name: crontabs.stable.example.com 2
    spec:
      group: stable.example.com 3
      versions:
        name: v1 4
      scope: Namespaced 5
      names:
        plural: crontabs 6
        singular: crontab 7
        kind: CronTab 8
        shortNames:
        - ct 9

    1
    Use the apiextensions.k8s.io/v1 API.
    2
    Specify a name for the definition. This must be in the <plural-name>.<group> format using the values from the group and plural fields.
    3
    Specify a group name for the API. An API group is a collection of objects that are logically related. For example, all batch objects like Job or ScheduledJob could be in the batch API group (such as batch.api.example.com). A good practice is to use a fully-qualified-domain name (FQDN) of your organization.
    4
    Specify a version name to be used in the URL. Each API group can exist in multiple versions, for example v1alpha, v1beta, v1.
    5
    Specify whether the custom objects are available to a project (Namespaced) or all projects in the cluster (Cluster).
    6
    Specify the plural name to use in the URL. The plural field is the same as a resource in an API URL.
    7
    Specify a singular name to use as an alias on the CLI and for display.
    8
    Specify the kind of objects that can be created. The type can be in CamelCase.
    9
    Specify a shorter string to match your resource on the CLI.
    Note

    By default, a CRD is cluster-scoped and available to all projects.

  2. Create the CRD object:

    $ oc create -f <file_name>.yaml

    A new RESTful API endpoint is created at:

    /apis/<spec:group>/<spec:version>/<scope>/*/<names-plural>/...

    For example, using the example file, the following endpoint is created:

    /apis/stable.example.com/v1/namespaces/*/crontabs/...

    You can now use this endpoint URL to create and manage CRs. The object kind is based on the spec.kind field of the CRD object you created.

2.7.1.3. Creating cluster roles for custom resource definitions

Cluster administrators can grant permissions to existing cluster-scoped custom resource definitions (CRDs). If you use the admin, edit, and view default cluster roles, you can take advantage of cluster role aggregation for their rules.

Important

You must explicitly assign permissions to each of these roles. The roles with more permissions do not inherit rules from roles with fewer permissions. If you assign a rule to a role, you must also assign that verb to roles that have more permissions. For example, if you grant the get crontabs permission to the view role, you must also grant it to the edit and admin roles. The admin or edit role is usually assigned to the user that created a project through the project template.

Prerequisites

  • Create a CRD.

Procedure

  1. Create a cluster role definition file for the CRD. The cluster role definition is a YAML file that contains the rules that apply to each cluster role. A OpenShift Container Platform controller adds the rules that you specify to the default cluster roles.

    Example YAML file for a cluster role definition

    kind: ClusterRole
    apiVersion: rbac.authorization.k8s.io/v1 1
    metadata:
      name: aggregate-cron-tabs-admin-edit 2
      labels:
        rbac.authorization.k8s.io/aggregate-to-admin: "true" 3
        rbac.authorization.k8s.io/aggregate-to-edit: "true" 4
    rules:
    - apiGroups: ["stable.example.com"] 5
      resources: ["crontabs"] 6
      verbs: ["get", "list", "watch", "create", "update", "patch", "delete", "deletecollection"] 7
    ---
    kind: ClusterRole
    apiVersion: rbac.authorization.k8s.io/v1
    metadata:
      name: aggregate-cron-tabs-view 8
      labels:
        # Add these permissions to the "view" default role.
        rbac.authorization.k8s.io/aggregate-to-view: "true" 9
        rbac.authorization.k8s.io/aggregate-to-cluster-reader: "true" 10
    rules:
    - apiGroups: ["stable.example.com"] 11
      resources: ["crontabs"] 12
      verbs: ["get", "list", "watch"] 13

    1
    Use the rbac.authorization.k8s.io/v1 API.
    2 8
    Specify a name for the definition.
    3
    Specify this label to grant permissions to the admin default role.
    4
    Specify this label to grant permissions to the edit default role.
    5 11
    Specify the group name of the CRD.
    6 12
    Specify the plural name of the CRD that these rules apply to.
    7 13
    Specify the verbs that represent the permissions that are granted to the role. For example, apply read and write permissions to the admin and edit roles and only read permission to the view role.
    9
    Specify this label to grant permissions to the view default role.
    10
    Specify this label to grant permissions to the cluster-reader default role.
  2. Create the cluster role:

    $ oc create -f <file_name>.yaml

2.7.1.4. Creating custom resources from a file

After a custom resource definitions (CRD) has been added to the cluster, custom resources (CRs) can be created with the CLI from a file using the CR specification.

Prerequisites

  • CRD added to the cluster by a cluster administrator.

Procedure

  1. Create a YAML file for the CR. In the following example definition, the cronSpec and image custom fields are set in a CR of Kind: CronTab. The Kind comes from the spec.kind field of the CRD object:

    Example YAML file for a CR

    apiVersion: "stable.example.com/v1" 1
    kind: CronTab 2
    metadata:
      name: my-new-cron-object 3
      finalizers: 4
      - finalizer.stable.example.com
    spec: 5
      cronSpec: "* * * * /5"
      image: my-awesome-cron-image

    1
    Specify the group name and API version (name/version) from the CRD.
    2
    Specify the type in the CRD.
    3
    Specify a name for the object.
    4
    Specify the finalizers for the object, if any. Finalizers allow controllers to implement conditions that must be completed before the object can be deleted.
    5
    Specify conditions specific to the type of object.
  2. After you create the file, create the object:

    $ oc create -f <file_name>.yaml

2.7.1.5. Inspecting custom resources

You can inspect custom resource (CR) objects that exist in your cluster using the CLI.

Prerequisites

  • A CR object exists in a namespace to which you have access.

Procedure

  1. To get information on a specific kind of a CR, run:

    $ oc get <kind>

    For example:

    $ oc get crontab

    Example output

    NAME                 KIND
    my-new-cron-object   CronTab.v1.stable.example.com

    Resource names are not case-sensitive, and you can use either the singular or plural forms defined in the CRD, as well as any short name. For example:

    $ oc get crontabs
    $ oc get crontab
    $ oc get ct
  2. You can also view the raw YAML data for a CR:

    $ oc get <kind> -o yaml

    For example:

    $ oc get ct -o yaml

    Example output

    apiVersion: v1
    items:
    - apiVersion: stable.example.com/v1
      kind: CronTab
      metadata:
        clusterName: ""
        creationTimestamp: 2017-05-31T12:56:35Z
        deletionGracePeriodSeconds: null
        deletionTimestamp: null
        name: my-new-cron-object
        namespace: default
        resourceVersion: "285"
        selfLink: /apis/stable.example.com/v1/namespaces/default/crontabs/my-new-cron-object
        uid: 9423255b-4600-11e7-af6a-28d2447dc82b
      spec:
        cronSpec: '* * * * /5' 1
        image: my-awesome-cron-image 2

    1 2
    Custom data from the YAML that you used to create the object displays.

2.7.2. Managing resources from custom resource definitions

This guide describes how developers can manage custom resources (CRs) that come from custom resource definitions (CRDs).

2.7.2.1. Custom resource definitions

In the Kubernetes API, a resource is an endpoint that stores a collection of API objects of a certain kind. For example, the built-in Pods resource contains a collection of Pod objects.

A custom resource definition (CRD) object defines a new, unique object type, called a kind, in the cluster and lets the Kubernetes API server handle its entire lifecycle.

Custom resource (CR) objects are created from CRDs that have been added to the cluster by a cluster administrator, allowing all cluster users to add the new resource type into projects.

Operators in particular make use of CRDs by packaging them with any required RBAC policy and other software-specific logic. Cluster administrators can also add CRDs manually to the cluster outside of the lifecycle of an Operator, making them available to all users.

Note

While only cluster administrators can create CRDs, developers can create the CR from an existing CRD if they have read and write permission to it.

2.7.2.2. Creating custom resources from a file

After a custom resource definitions (CRD) has been added to the cluster, custom resources (CRs) can be created with the CLI from a file using the CR specification.

Prerequisites

  • CRD added to the cluster by a cluster administrator.

Procedure

  1. Create a YAML file for the CR. In the following example definition, the cronSpec and image custom fields are set in a CR of Kind: CronTab. The Kind comes from the spec.kind field of the CRD object:

    Example YAML file for a CR

    apiVersion: "stable.example.com/v1" 1
    kind: CronTab 2
    metadata:
      name: my-new-cron-object 3
      finalizers: 4
      - finalizer.stable.example.com
    spec: 5
      cronSpec: "* * * * /5"
      image: my-awesome-cron-image

    1
    Specify the group name and API version (name/version) from the CRD.
    2
    Specify the type in the CRD.
    3
    Specify a name for the object.
    4
    Specify the finalizers for the object, if any. Finalizers allow controllers to implement conditions that must be completed before the object can be deleted.
    5
    Specify conditions specific to the type of object.
  2. After you create the file, create the object:

    $ oc create -f <file_name>.yaml

2.7.2.3. Inspecting custom resources

You can inspect custom resource (CR) objects that exist in your cluster using the CLI.

Prerequisites

  • A CR object exists in a namespace to which you have access.

Procedure

  1. To get information on a specific kind of a CR, run:

    $ oc get <kind>

    For example:

    $ oc get crontab

    Example output

    NAME                 KIND
    my-new-cron-object   CronTab.v1.stable.example.com

    Resource names are not case-sensitive, and you can use either the singular or plural forms defined in the CRD, as well as any short name. For example:

    $ oc get crontabs
    $ oc get crontab
    $ oc get ct
  2. You can also view the raw YAML data for a CR:

    $ oc get <kind> -o yaml

    For example:

    $ oc get ct -o yaml

    Example output

    apiVersion: v1
    items:
    - apiVersion: stable.example.com/v1
      kind: CronTab
      metadata:
        clusterName: ""
        creationTimestamp: 2017-05-31T12:56:35Z
        deletionGracePeriodSeconds: null
        deletionTimestamp: null
        name: my-new-cron-object
        namespace: default
        resourceVersion: "285"
        selfLink: /apis/stable.example.com/v1/namespaces/default/crontabs/my-new-cron-object
        uid: 9423255b-4600-11e7-af6a-28d2447dc82b
      spec:
        cronSpec: '* * * * /5' 1
        image: my-awesome-cron-image 2

    1 2
    Custom data from the YAML that you used to create the object displays.

Chapter 3. User tasks

3.1. Creating applications from installed Operators

This guide walks developers through an example of creating applications from an installed Operator using the OpenShift Container Platform web console.

3.1.1. Creating an etcd cluster using an Operator

This procedure walks through creating a new etcd cluster using the etcd Operator, managed by Operator Lifecycle Manager (OLM).

Prerequisites

  • Access to an OpenShift Container Platform 4.8 cluster.
  • The etcd Operator already installed cluster-wide by an administrator.

Procedure

  1. Create a new project in the OpenShift Container Platform web console for this procedure. This example uses a project called my-etcd.
  2. Navigate to the Operators → Installed Operators page. The Operators that have been installed to the cluster by the cluster administrator and are available for use are shown here as a list of cluster service versions (CSVs). CSVs are used to launch and manage the software provided by the Operator.

    Tip

    You can get this list from the CLI using:

    $ oc get csv
  3. On the Installed Operators page, click the etcd Operator to view more details and available actions.

    As shown under Provided APIs, this Operator makes available three new resource types, including one for an etcd Cluster (the EtcdCluster resource). These objects work similar to the built-in native Kubernetes ones, such as Deployment or ReplicaSet, but contain logic specific to managing etcd.

  4. Create a new etcd cluster:

    1. In the etcd Cluster API box, click Create instance.
    2. The next screen allows you to make any modifications to the minimal starting template of an EtcdCluster object, such as the size of the cluster. For now, click Create to finalize. This triggers the Operator to start up the pods, services, and other components of the new etcd cluster.
  5. Click on the example etcd cluster, then click the Resources tab to see that your project now contains a number of resources created and configured automatically by the Operator.

    Verify that a Kubernetes service has been created that allows you to access the database from other pods in your project.

  6. All users with the edit role in a given project can create, manage, and delete application instances (an etcd cluster, in this example) managed by Operators that have already been created in the project, in a self-service manner, just like a cloud service. If you want to enable additional users with this ability, project administrators can add the role using the following command:

    $ oc policy add-role-to-user edit <user> -n <target_project>

You now have an etcd cluster that will react to failures and rebalance data as pods become unhealthy or are migrated between nodes in the cluster. Most importantly, cluster administrators or developers with proper access can now easily use the database with their applications.

3.2. Installing Operators in your namespace

If a cluster administrator has delegated Operator installation permissions to your account, you can install and subscribe an Operator to your namespace in a self-service manner.

3.2.1. Prerequisites

3.2.2. About Operator installation with OperatorHub

OperatorHub is a user interface for discovering Operators; it works in conjunction with Operator Lifecycle Manager (OLM), which installs and manages Operators on a cluster.

As a user with the proper permissions, you can install an Operator from OperatorHub using the OpenShift Container Platform web console or CLI.

During installation, you must determine the following initial settings for the Operator:

Installation Mode
Choose a specific namespace in which to install the Operator.
Update Channel
If an Operator is available through multiple channels, you can choose which channel you want to subscribe to. For example, to deploy from the stable channel, if available, select it from the list.
Approval Strategy

You can choose automatic or manual updates.

If you choose automatic updates for an installed Operator, when a new version of that Operator is available in the selected channel, Operator Lifecycle Manager (OLM) automatically upgrades the running instance of your Operator without human intervention.

If you select manual updates, when a newer version of an Operator is available, OLM creates an update request. As a cluster administrator, you must then manually approve that update request to have the Operator updated to the new version.

3.2.3. Installing from OperatorHub using the web console

You can install and subscribe to an Operator from OperatorHub using the OpenShift Container Platform web console.

Prerequisites

  • Access to an OpenShift Container Platform cluster using an account with Operator installation permissions.

Procedure

  1. Navigate in the web console to the Operators → OperatorHub page.
  2. Scroll or type a keyword into the Filter by keyword box to find the Operator you want. For example, type advanced to find the Advanced Cluster Management for Kubernetes Operator.

    You can also filter options by Infrastructure Features. For example, select Disconnected if you want to see Operators that work in disconnected environments, also known as restricted network environments.

  3. Select the Operator to display additional information.

    Note

    Choosing a Community Operator warns that Red Hat does not certify Community Operators; you must acknowledge the warning before continuing.

  4. Read the information about the Operator and click Install.
  5. On the Install Operator page:

    1. Choose a specific, single namespace in which to install the Operator. The Operator will only watch and be made available for use in this single namespace.
    2. Select an Update Channel (if more than one is available).
    3. Select Automatic or Manual approval strategy, as described earlier.
  6. Click Install to make the Operator available to the selected namespaces on this OpenShift Container Platform cluster.

    1. If you selected a Manual approval strategy, the upgrade status of the subscription remains Upgrading until you review and approve the install plan.

      After approving on the Install Plan page, the subscription upgrade status moves to Up to date.

    2. If you selected an Automatic approval strategy, the upgrade status should resolve to Up to date without intervention.
  7. After the upgrade status of the subscription is Up to date, select Operators → Installed Operators to verify that the cluster service version (CSV) of the installed Operator eventually shows up. The Status should ultimately resolve to InstallSucceeded in the relevant namespace.

    Note

    For the All namespaces…​ installation mode, the status resolves to InstallSucceeded in the openshift-operators namespace, but the status is Copied if you check in other namespaces.

    If it does not:

    1. Check the logs in any pods in the openshift-operators project (or other relevant namespace if A specific namespace…​ installation mode was selected) on the Workloads → Pods page that are reporting issues to troubleshoot further.

3.2.4. Installing from OperatorHub using the CLI

Instead of using the OpenShift Container Platform web console, you can install an Operator from OperatorHub using the CLI. Use the oc command to create or update a Subscription object.

Prerequisites

  • Access to an OpenShift Container Platform cluster using an account with Operator installation permissions.
  • Install the oc command to your local system.

Procedure

  1. View the list of Operators available to the cluster from OperatorHub:

    $ oc get packagemanifests -n openshift-marketplace

    Example output

    NAME                               CATALOG               AGE
    3scale-operator                    Red Hat Operators     91m
    advanced-cluster-management        Red Hat Operators     91m
    amq7-cert-manager                  Red Hat Operators     91m
    ...
    couchbase-enterprise-certified     Certified Operators   91m
    crunchy-postgres-operator          Certified Operators   91m
    mongodb-enterprise                 Certified Operators   91m
    ...
    etcd                               Community Operators   91m
    jaeger                             Community Operators   91m
    kubefed                            Community Operators   91m
    ...

    Note the catalog for your desired Operator.

  2. Inspect your desired Operator to verify its supported install modes and available channels:

    $ oc describe packagemanifests <operator_name> -n openshift-marketplace
  3. An Operator group, defined by an OperatorGroup object, selects target namespaces in which to generate required RBAC access for all Operators in the same namespace as the Operator group.

    The namespace to which you subscribe the Operator must have an Operator group that matches the install mode of the Operator, either the AllNamespaces or SingleNamespace mode. If the Operator you intend to install uses the AllNamespaces, then the openshift-operators namespace already has an appropriate Operator group in place.

    However, if the Operator uses the SingleNamespace mode and you do not already have an appropriate Operator group in place, you must create one.

    Note

    The web console version of this procedure handles the creation of the OperatorGroup and Subscription objects automatically behind the scenes for you when choosing SingleNamespace mode.

    1. Create an OperatorGroup object YAML file, for example operatorgroup.yaml:

      Example OperatorGroup object

      apiVersion: operators.coreos.com/v1
      kind: OperatorGroup
      metadata:
        name: <operatorgroup_name>
        namespace: <namespace>
      spec:
        targetNamespaces:
        - <namespace>

    2. Create the OperatorGroup object:

      $ oc apply -f operatorgroup.yaml
  4. Create a Subscription object YAML file to subscribe a namespace to an Operator, for example sub.yaml:

    Example Subscription object

    apiVersion: operators.coreos.com/v1alpha1
    kind: Subscription
    metadata:
      name: <subscription_name>
      namespace: openshift-operators 1
    spec:
      channel: <channel_name> 2
      name: <operator_name> 3
      source: redhat-operators 4
      sourceNamespace: openshift-marketplace 5
      config:
        env: 6
        - name: ARGS
          value: "-v=10"
        envFrom: 7
        - secretRef:
            name: license-secret
        volumes: 8
        - name: <volume_name>
          configMap:
            name: <configmap_name>
        volumeMounts: 9
        - mountPath: <directory_name>
          name: <volume_name>
        tolerations: 10
        - operator: "Exists"
        resources: 11
          requests:
            memory: "64Mi"
            cpu: "250m"
          limits:
            memory: "128Mi"
            cpu: "500m"
        nodeSelector: 12
          foo: bar

    1
    For AllNamespaces install mode usage, specify the openshift-operators namespace. Otherwise, specify the relevant single namespace for SingleNamespace install mode usage.
    2
    Name of the channel to subscribe to.
    3
    Name of the Operator to subscribe to.
    4
    Name of the catalog source that provides the Operator.
    5
    Namespace of the catalog source. Use openshift-marketplace for the default OperatorHub catalog sources.
    6
    The env parameter defines a list of Environment Variables that must exist in all containers in the pod created by OLM.
    7
    The envFrom parameter defines a list of sources to populate Environment Variables in the container.
    8
    The volumes parameter defines a list of Volumes that must exist on the pod created by OLM.
    9
    The volumeMounts parameter defines a list of VolumeMounts that must exist in all containers in the pod created by OLM. If a volumeMount references a volume that does not exist, OLM fails to deploy the Operator.
    10
    The tolerations parameter defines a list of Tolerations for the pod created by OLM.
    11
    The resources parameter defines resource constraints for all the containers in the pod created by OLM.
    12
    The nodeSelector parameter defines a NodeSelector for the pod created by OLM.
  5. Create the Subscription object:

    $ oc apply -f sub.yaml

    At this point, OLM is now aware of the selected Operator. A cluster service version (CSV) for the Operator should appear in the target namespace, and APIs provided by the Operator should be available for creation.

Additional resources

3.2.5. Installing a specific version of an Operator

You can install a specific version of an Operator by setting the cluster service version (CSV) in a Subscription object.

Prerequisites

  • Access to an OpenShift Container Platform cluster using an account with Operator installation permissions
  • OpenShift CLI (oc) installed

Procedure

  1. Create a Subscription object YAML file that subscribes a namespace to an Operator with a specific version by setting the startingCSV field. Set the installPlanApproval field to Manual to prevent the Operator from automatically upgrading if a later version exists in the catalog.

    For example, the following sub.yaml file can be used to install the Red Hat Quay Operator specifically to version 3.4.0:

    Subscription with a specific starting Operator version

    apiVersion: operators.coreos.com/v1alpha1
    kind: Subscription
    metadata:
      name: quay-operator
      namespace: quay
    spec:
      channel: quay-v3.4
      installPlanApproval: Manual 1
      name: quay-operator
      source: redhat-operators
      sourceNamespace: openshift-marketplace
      startingCSV: quay-operator.v3.4.0 2

    1
    Set the approval strategy to Manual in case your specified version is superseded by a later version in the catalog. This plan prevents an automatic upgrade to a later version and requires manual approval before the starting CSV can complete the installation.
    2
    Set a specific version of an Operator CSV.
  2. Create the Subscription object:

    $ oc apply -f sub.yaml
  3. Manually approve the pending install plan to complete the Operator installation.

Chapter 4. Administrator tasks

4.1. Adding Operators to a cluster

Cluster administrators can install Operators to an OpenShift Container Platform cluster by subscribing Operators to namespaces with OperatorHub.

4.1.1. About Operator installation with OperatorHub

OperatorHub is a user interface for discovering Operators; it works in conjunction with Operator Lifecycle Manager (OLM), which installs and manages Operators on a cluster.

As a user with the proper permissions, you can install an Operator from OperatorHub using the OpenShift Container Platform web console or CLI.

During installation, you must determine the following initial settings for the Operator:

Installation Mode
Choose a specific namespace in which to install the Operator.
Update Channel
If an Operator is available through multiple channels, you can choose which channel you want to subscribe to. For example, to deploy from the stable channel, if available, select it from the list.
Approval Strategy

You can choose automatic or manual updates.

If you choose automatic updates for an installed Operator, when a new version of that Operator is available in the selected channel, Operator Lifecycle Manager (OLM) automatically upgrades the running instance of your Operator without human intervention.

If you select manual updates, when a newer version of an Operator is available, OLM creates an update request. As a cluster administrator, you must then manually approve that update request to have the Operator updated to the new version.

4.1.2. Installing from OperatorHub using the web console

You can install and subscribe to an Operator from OperatorHub using the OpenShift Container Platform web console.

Prerequisites

  • Access to an OpenShift Container Platform cluster using an account with cluster-admin permissions.
  • Access to an OpenShift Container Platform cluster using an account with Operator installation permissions.

Procedure

  1. Navigate in the web console to the Operators → OperatorHub page.
  2. Scroll or type a keyword into the Filter by keyword box to find the Operator you want. For example, type advanced to find the Advanced Cluster Management for Kubernetes Operator.

    You can also filter options by Infrastructure Features. For example, select Disconnected if you want to see Operators that work in disconnected environments, also known as restricted network environments.

  3. Select the Operator to display additional information.

    Note

    Choosing a Community Operator warns that Red Hat does not certify Community Operators; you must acknowledge the warning before continuing.

  4. Read the information about the Operator and click Install.
  5. On the Install Operator page:

    1. Select one of the following:

      • All namespaces on the cluster (default) installs the Operator in the default openshift-operators namespace to watch and be made available to all namespaces in the cluster. This option is not always available.
      • A specific namespace on the cluster allows you to choose a specific, single namespace in which to install the Operator. The Operator will only watch and be made available for use in this single namespace.
    2. Choose a specific, single namespace in which to install the Operator. The Operator will only watch and be made available for use in this single namespace.
    3. Select an Update Channel (if more than one is available).
    4. Select Automatic or Manual approval strategy, as described earlier.
  6. Click Install to make the Operator available to the selected namespaces on this OpenShift Container Platform cluster.

    1. If you selected a Manual approval strategy, the upgrade status of the subscription remains Upgrading until you review and approve the install plan.

      After approving on the Install Plan page, the subscription upgrade status moves to Up to date.

    2. If you selected an Automatic approval strategy, the upgrade status should resolve to Up to date without intervention.
  7. After the upgrade status of the subscription is Up to date, select Operators → Installed Operators to verify that the cluster service version (CSV) of the installed Operator eventually shows up. The Status should ultimately resolve to InstallSucceeded in the relevant namespace.

    Note

    For the All namespaces…​ installation mode, the status resolves to InstallSucceeded in the openshift-operators namespace, but the status is Copied if you check in other namespaces.

    If it does not:

    1. Check the logs in any pods in the openshift-operators project (or other relevant namespace if A specific namespace…​ installation mode was selected) on the Workloads → Pods page that are reporting issues to troubleshoot further.

4.1.3. Installing from OperatorHub using the CLI

Instead of using the OpenShift Container Platform web console, you can install an Operator from OperatorHub using the CLI. Use the oc command to create or update a Subscription object.

Prerequisites

  • Access to an OpenShift Container Platform cluster using an account with Operator installation permissions.
  • Install the oc command to your local system.

Procedure

  1. View the list of Operators available to the cluster from OperatorHub:

    $ oc get packagemanifests -n openshift-marketplace

    Example output

    NAME                               CATALOG               AGE
    3scale-operator                    Red Hat Operators     91m
    advanced-cluster-management        Red Hat Operators     91m
    amq7-cert-manager                  Red Hat Operators     91m
    ...
    couchbase-enterprise-certified     Certified Operators   91m
    crunchy-postgres-operator          Certified Operators   91m
    mongodb-enterprise                 Certified Operators   91m
    ...
    etcd                               Community Operators   91m
    jaeger                             Community Operators   91m
    kubefed                            Community Operators   91m
    ...

    Note the catalog for your desired Operator.

  2. Inspect your desired Operator to verify its supported install modes and available channels:

    $ oc describe packagemanifests <operator_name> -n openshift-marketplace
  3. An Operator group, defined by an OperatorGroup object, selects target namespaces in which to generate required RBAC access for all Operators in the same namespace as the Operator group.

    The namespace to which you subscribe the Operator must have an Operator group that matches the install mode of the Operator, either the AllNamespaces or SingleNamespace mode. If the Operator you intend to install uses the AllNamespaces, then the openshift-operators namespace already has an appropriate Operator group in place.

    However, if the Operator uses the SingleNamespace mode and you do not already have an appropriate Operator group in place, you must create one.

    Note

    The web console version of this procedure handles the creation of the OperatorGroup and Subscription objects automatically behind the scenes for you when choosing SingleNamespace mode.

    1. Create an OperatorGroup object YAML file, for example operatorgroup.yaml:

      Example OperatorGroup object

      apiVersion: operators.coreos.com/v1
      kind: OperatorGroup
      metadata:
        name: <operatorgroup_name>
        namespace: <namespace>
      spec:
        targetNamespaces:
        - <namespace>

    2. Create the OperatorGroup object:

      $ oc apply -f operatorgroup.yaml
  4. Create a Subscription object YAML file to subscribe a namespace to an Operator, for example sub.yaml:

    Example Subscription object

    apiVersion: operators.coreos.com/v1alpha1
    kind: Subscription
    metadata:
      name: <subscription_name>
      namespace: openshift-operators 1
    spec:
      channel: <channel_name> 2
      name: <operator_name> 3
      source: redhat-operators 4
      sourceNamespace: openshift-marketplace 5
      config:
        env: 6
        - name: ARGS
          value: "-v=10"
        envFrom: 7
        - secretRef:
            name: license-secret
        volumes: 8
        - name: <volume_name>
          configMap:
            name: <configmap_name>
        volumeMounts: 9
        - mountPath: <directory_name>
          name: <volume_name>
        tolerations: 10
        - operator: "Exists"
        resources: 11
          requests:
            memory: "64Mi"
            cpu: "250m"
          limits:
            memory: "128Mi"
            cpu: "500m"
        nodeSelector: 12
          foo: bar

    1
    For AllNamespaces install mode usage, specify the openshift-operators namespace. Otherwise, specify the relevant single namespace for SingleNamespace install mode usage.
    2
    Name of the channel to subscribe to.
    3
    Name of the Operator to subscribe to.
    4
    Name of the catalog source that provides the Operator.
    5
    Namespace of the catalog source. Use openshift-marketplace for the default OperatorHub catalog sources.
    6
    The env parameter defines a list of Environment Variables that must exist in all containers in the pod created by OLM.
    7
    The envFrom parameter defines a list of sources to populate Environment Variables in the container.
    8
    The volumes parameter defines a list of Volumes that must exist on the pod created by OLM.
    9
    The volumeMounts parameter defines a list of VolumeMounts that must exist in all containers in the pod created by OLM. If a volumeMount references a volume that does not exist, OLM fails to deploy the Operator.
    10
    The tolerations parameter defines a list of Tolerations for the pod created by OLM.
    11
    The resources parameter defines resource constraints for all the containers in the pod created by OLM.
    12
    The nodeSelector parameter defines a NodeSelector for the pod created by OLM.
  5. Create the Subscription object:

    $ oc apply -f sub.yaml

    At this point, OLM is now aware of the selected Operator. A cluster service version (CSV) for the Operator should appear in the target namespace, and APIs provided by the Operator should be available for creation.

Additional resources

4.1.4. Installing a specific version of an Operator

You can install a specific version of an Operator by setting the cluster service version (CSV) in a Subscription object.

Prerequisites

  • Access to an OpenShift Container Platform cluster using an account with Operator installation permissions
  • OpenShift CLI (oc) installed

Procedure

  1. Create a Subscription object YAML file that subscribes a namespace to an Operator with a specific version by setting the startingCSV field. Set the installPlanApproval field to Manual to prevent the Operator from automatically upgrading if a later version exists in the catalog.

    For example, the following sub.yaml file can be used to install the Red Hat Quay Operator specifically to version 3.4.0:

    Subscription with a specific starting Operator version

    apiVersion: operators.coreos.com/v1alpha1
    kind: Subscription
    metadata:
      name: quay-operator
      namespace: quay
    spec:
      channel: quay-v3.4
      installPlanApproval: Manual 1
      name: quay-operator
      source: redhat-operators
      sourceNamespace: openshift-marketplace
      startingCSV: quay-operator.v3.4.0 2

    1
    Set the approval strategy to Manual in case your specified version is superseded by a later version in the catalog. This plan prevents an automatic upgrade to a later version and requires manual approval before the starting CSV can complete the installation.
    2
    Set a specific version of an Operator CSV.
  2. Create the Subscription object:

    $ oc apply -f sub.yaml
  3. Manually approve the pending install plan to complete the Operator installation.

4.1.5. Pod placement of Operator workloads

By default, Operator Lifecycle Manager (OLM) places pods on arbitrary worker nodes when installing an Operator or deploying Operand workloads. As an administrator, you can use projects with a combination of node selectors, taints, and tolerations to control the placement of Operators and Operands to specific nodes.

Controlling pod placement of Operator and Operand workloads has the following prerequisites:

  1. Determine a node or set of nodes to target for the pods per your requirements. If available, note an existing label, such as node-role.kubernetes.io/app, that identifies the node or nodes. Otherwise, add a label, such as myoperator, by using a machine set or editing the node directly. You will use this label in a later step as the node selector on your project.
  2. If you want to ensure that only pods with a certain label are allowed to run on the nodes, while steering unrelated workloads to other nodes, add a taint to the node or nodes by using a machine set or editing the node directly. Use an effect that ensures that new pods that do not match the taint cannot be scheduled on the nodes. For example, a myoperator:NoSchedule taint ensures that new pods that do not match the taint are not scheduled onto that node, but existing pods on the node are allowed to remain.
  3. Create a project that is configured with a default node selector and, if you added a taint, a matching toleration.

At this point, the project you created can be used to steer pods towards the specified nodes in the following scenarios:

For Operator pods
Administrators can create a Subscription object in the project. As a result, the Operator pods are placed on the specified nodes.
For Operand pods
Using an installed Operator, users can create an application in the project, which places the custom resource (CR) owned by the Operator in the project. As a result, the Operand pods are placed on the specified nodes, unless the Operator is deploying cluster-wide objects or resources in other namespaces, in which case this customized pod placement does not apply.

4.2. Updating installed Operators

As a cluster administrator, you can update Operators that have been previously installed using Operator Lifecycle Manager (OLM) on your OpenShift Container Platform cluster.

4.2.1. Preparing for an Operator update

The subscription of an installed Operator specifies an update channel that tracks and receives updates for the Operator. You can change the update channel to start tracking and receiving updates from a newer channel.

The names of update channels in a subscription can differ between Operators, but the naming scheme typically follows a common convention within a given Operator. For example, channel names might follow a minor release update stream for the application provided by the Operator (1.2, 1.3) or a release frequency (stable, fast).

Note

You cannot change installed Operators to a channel that is older than the current channel.

Red Hat Customer Portal Labs include the following application that helps administrators prepare to update their Operators:

You can use the application to search for Operator Lifecycle Manager-based Operators and verify the available Operator version per update channel across different versions of OpenShift Container Platform. Cluster Version Operator-based Operators are not included.

4.2.2. Changing the update channel for an Operator

You can change the update channel for an Operator by using the OpenShift Container Platform web console.

Tip

If the approval strategy in the subscription is set to Automatic, the update process initiates as soon as a new Operator version is available in the selected channel. If the approval strategy is set to Manual, you must manually approve pending updates.

Prerequisites

  • An Operator previously installed using Operator Lifecycle Manager (OLM).

Procedure

  1. In the Administrator perspective of the web console, navigate to Operators → Installed Operators.
  2. Click the name of the Operator you want to change the update channel for.
  3. Click the Subscription tab.
  4. Click the name of the update channel under Channel.
  5. Click the newer update channel that you want to change to, then click Save.
  6. For subscriptions with an Automatic approval strategy, the update begins automatically. Navigate back to the Operators → Installed Operators page to monitor the progress of the update. When complete, the status changes to Succeeded and Up to date.

    For subscriptions with a Manual approval strategy, you can manually approve the update from the Subscription tab.

4.2.3. Manually approving a pending Operator update

If an installed Operator has the approval strategy in its subscription set to Manual, when new updates are released in its current update channel, the update must be manually approved before installation can begin.

Prerequisites

  • An Operator previously installed using Operator Lifecycle Manager (OLM).

Procedure

  1. In the Administrator perspective of the OpenShift Container Platform web console, navigate to Operators → Installed Operators.
  2. Operators that have a pending update display a status with Upgrade available. Click the name of the Operator you want to update.
  3. Click the Subscription tab. Any update requiring approval are displayed next to Upgrade Status. For example, it might display 1 requires approval.
  4. Click 1 requires approval, then click Preview Install Plan.
  5. Review the resources that are listed as available for update. When satisfied, click Approve.
  6. Navigate back to the Operators → Installed Operators page to monitor the progress of the update. When complete, the status changes to Succeeded and Up to date.

4.3. Deleting Operators from a cluster

The following describes how to delete Operators that were previously installed using Operator Lifecycle Manager (OLM) on your OpenShift Container Platform cluster.

4.3.1. Deleting Operators from a cluster using the web console

Cluster administrators can delete installed Operators from a selected namespace by using the web console.

Prerequisites

  • Access to an OpenShift Container Platform cluster web console using an account with cluster-admin permissions.

Procedure

  1. From the OperatorsInstalled Operators page, scroll or type a keyword into the Filter by name to find the Operator you want. Then, click on it.
  2. On the right side of the Operator Details page, select Uninstall Operator from the Actions list.

    An Uninstall Operator? dialog box is displayed, reminding you that:

    Removing the Operator will not remove any of its custom resource definitions or managed resources. If your Operator has deployed applications on the cluster or configured off-cluster resources, these will continue to run and need to be cleaned up manually.

    This action removes the Operator as well as the Operator deployments and pods, if any. Any Operands, and resources managed by the Operator, including CRDs and CRs, are not removed. The web console enables dashboards and navigation items for some Operators. To remove these after uninstalling the Operator, you might need to manually delete the Operator CRDs.

  3. Select Uninstall. This Operator stops running and no longer receives updates.

4.3.2. Deleting Operators from a cluster using the CLI

Cluster administrators can delete installed Operators from a selected namespace by using the CLI.

Prerequisites

  • Access to an OpenShift Container Platform cluster using an account with cluster-admin permissions.
  • oc command installed on workstation.

Procedure

  1. Check the current version of the subscribed Operator (for example, jaeger) in the currentCSV field:

    $ oc get subscription jaeger -n openshift-operators -o yaml | grep currentCSV

    Example output

      currentCSV: jaeger-operator.v1.8.2

  2. Delete the subscription (for example, jaeger):

    $ oc delete subscription jaeger -n openshift-operators

    Example output

    subscription.operators.coreos.com "jaeger" deleted

  3. Delete the CSV for the Operator in the target namespace using the currentCSV value from the previous step:

    $ oc delete clusterserviceversion jaeger-operator.v1.8.2 -n openshift-operators

    Example output

    clusterserviceversion.operators.coreos.com "jaeger-operator.v1.8.2" deleted

4.3.3. Refreshing failing subscriptions

In Operator Lifecycle Manager (OLM), if you subscribe to an Operator that references images that are not accessible on your network, you can find jobs in the openshift-marketplace namespace that are failing with the following errors:

Example output

ImagePullBackOff for
Back-off pulling image "example.com/openshift4/ose-elasticsearch-operator-bundle@sha256:6d2587129c846ec28d384540322b40b05833e7e00b25cca584e004af9a1d292e"

Example output

rpc error: code = Unknown desc = error pinging docker registry example.com: Get "https://example.com/v2/": dial tcp: lookup example.com on 10.0.0.1:53: no such host

As a result, the subscription is stuck in this failing state and the Operator is unable to install or upgrade.

You can refresh a failing subscription by deleting the subscription, cluster service version (CSV), and other related objects. After recreating the subscription, OLM then reinstalls the correct version of the Operator.

Prerequisites

  • You have a failing subscription that is unable to pull an inaccessible bundle image.
  • You have confirmed that the correct bundle image is accessible.

Procedure

  1. Get the names of the Subscription and ClusterServiceVersion objects from the namespace where the Operator is installed:

    $ oc get sub,csv -n <namespace>

    Example output

    NAME                                                       PACKAGE                  SOURCE             CHANNEL
    subscription.operators.coreos.com/elasticsearch-operator   elasticsearch-operator   redhat-operators   5.0
    
    NAME                                                                         DISPLAY                            VERSION    REPLACES   PHASE
    clusterserviceversion.operators.coreos.com/elasticsearch-operator.5.0.0-65   OpenShift Elasticsearch Operator   5.0.0-65              Succeeded

  2. Delete the subscription:

    $ oc delete subscription <subscription_name> -n <namespace>
  3. Delete the cluster service version:

    $ oc delete csv <csv_name> -n <namespace>
  4. Get the names of any failing jobs and related config maps in the openshift-marketplace namespace:

    $ oc get job,configmap -n openshift-marketplace

    Example output

    NAME                                                                        COMPLETIONS   DURATION   AGE
    job.batch/1de9443b6324e629ddf31fed0a853a121275806170e34c926d69e53a7fcbccb   1/1           26s        9m30s
    
    NAME                                                                        DATA   AGE
    configmap/1de9443b6324e629ddf31fed0a853a121275806170e34c926d69e53a7fcbccb   3      9m30s

  5. Delete the job:

    $ oc delete job <job_name> -n openshift-marketplace

    This ensures pods that try to pull the inaccessible image are not recreated.

  6. Delete the config map:

    $ oc delete configmap <configmap_name> -n openshift-marketplace
  7. Reinstall the Operator using OperatorHub in the web console.

Verification

  • Check that the Operator has been reinstalled successfully:

    $ oc get sub,csv,installplan -n <namespace>

4.4. Configuring proxy support in Operator Lifecycle Manager

If a global proxy is configured on the OpenShift Container Platform cluster, Operator Lifecycle Manager (OLM) automatically configures Operators that it manages with the cluster-wide proxy. However, you can also configure installed Operators to override the global proxy or inject a custom CA certificate.

Additional resources

4.4.1. Overriding proxy settings of an Operator

If a cluster-wide egress proxy is configured, Operators running with Operator Lifecycle Manager (OLM) inherit the cluster-wide proxy settings on their deployments. Cluster administrators can also override these proxy settings by configuring the subscription of an Operator.

Important

Operators must handle setting environment variables for proxy settings in the pods for any managed Operands.

Prerequisites

  • Access to an OpenShift Container Platform cluster using an account with cluster-admin permissions.

Procedure

  1. Navigate in the web console to the Operators → OperatorHub page.
  2. Select the Operator and click Install.
  3. On the Install Operator page, modify the Subscription object to include one or more of the following environment variables in the spec section:

    • HTTP_PROXY
    • HTTPS_PROXY
    • NO_PROXY

    For example:

    Subscription object with proxy setting overrides

    apiVersion: operators.coreos.com/v1alpha1
    kind: Subscription
    metadata:
      name: etcd-config-test
      namespace: openshift-operators
    spec:
      config:
        env:
        - name: HTTP_PROXY
          value: test_http
        - name: HTTPS_PROXY
          value: test_https
        - name: NO_PROXY
          value: test
      channel: clusterwide-alpha
      installPlanApproval: Automatic
      name: etcd
      source: community-operators
      sourceNamespace: openshift-marketplace
      startingCSV: etcdoperator.v0.9.4-clusterwide

    Note

    These environment variables can also be unset using an empty value to remove any previously set cluster-wide or custom proxy settings.

    OLM handles these environment variables as a unit; if at least one of them is set, all three are considered overridden and the cluster-wide defaults are not used for the deployments of the subscribed Operator.

  4. Click Install to make the Operator available to the selected namespaces.
  5. After the CSV for the Operator appears in the relevant namespace, you can verify that custom proxy environment variables are set in the deployment. For example, using the CLI:

    $ oc get deployment -n openshift-operators \
        etcd-operator -o yaml \
        | grep -i "PROXY" -A 2

    Example output

            - name: HTTP_PROXY
              value: test_http
            - name: HTTPS_PROXY
              value: test_https
            - name: NO_PROXY
              value: test
            image: quay.io/coreos/etcd-operator@sha256:66a37fd61a06a43969854ee6d3e21088a98b93838e284a6086b13917f96b0d9c
    ...

4.4.2. Injecting a custom CA certificate

When a cluster administrator adds a custom CA certificate to a cluster using a config map, the Cluster Network Operator merges the user-provided certificates and system CA certificates into a single bundle. You can inject this merged bundle into your Operator running on Operator Lifecycle Manager (OLM), which is useful if you have a man-in-the-middle HTTPS proxy.

Prerequisites

  • Access to an OpenShift Container Platform cluster using an account with cluster-admin permissions.
  • Custom CA certificate added to the cluster using a config map.
  • Desired Operator installed and running on OLM.

Procedure

  1. Create an empty config map in the namespace where the subscription for your Operator exists and include the following label:

    apiVersion: v1
    kind: ConfigMap
    metadata:
      name: trusted-ca 1
      labels:
        config.openshift.io/inject-trusted-cabundle: "true" 2
    1
    Name of the config map.
    2
    Requests the Cluster Network Operator to inject the merged bundle.

    After creating this config map, it is immediately populated with the certificate contents of the merged bundle.

  2. Update your the Subscription object to include a spec.config section that mounts the trusted-ca config map as a volume to each container within a pod that requires a custom CA:

    apiVersion: operators.coreos.com/v1alpha1
    kind: Subscription
    metadata:
      name: my-operator
    spec:
      package: etcd
      channel: alpha
      config: 1
        selector:
          matchLabels:
            <labels_for_pods> 2
        volumes: 3
        - name: trusted-ca
          configMap:
            name: trusted-ca
            items:
              - key: ca-bundle.crt 4
                path: tls-ca-bundle.pem 5
        volumeMounts: 6
        - name: trusted-ca
          mountPath: /etc/pki/ca-trust/extracted/pem
          readOnly: true
    1
    Add a config section if it does not exist.
    2
    Specify labels to match pods that are owned by the Operator.
    3
    Create a trusted-ca volume.
    4
    ca-bundle.crt is required as the config map key.
    5
    tls-ca-bundle.pem is required as the config map path.
    6
    Create a trusted-ca volume mount.

4.5. Viewing Operator status

Understanding the state of the system in Operator Lifecycle Manager (OLM) is important for making decisions about and debugging problems with installed Operators. OLM provides insight into subscriptions and related catalog sources regarding their state and actions performed. This helps users better understand the healthiness of their Operators.

4.5.1. Operator subscription condition types

Subscriptions can report the following condition types:

Table 4.1. Subscription condition types

ConditionDescription

CatalogSourcesUnhealthy

Some or all of the catalog sources to be used in resolution are unhealthy.

InstallPlanMissing

An install plan for a subscription is missing.

InstallPlanPending

An install plan for a subscription is pending installation.

InstallPlanFailed

An install plan for a subscription has failed.

Note

Default OpenShift Container Platform cluster Operators are managed by the Cluster Version Operator (CVO) and they do not have a Subscription object. Application Operators are managed by Operator Lifecycle Manager (OLM) and they have a Subscription object.

Additional resources

4.5.2. Viewing Operator subscription status by using the CLI

You can view Operator subscription status by using the CLI.

Prerequisites

  • You have access to the cluster as a user with the cluster-admin role.
  • You have installed the OpenShift CLI (oc).

Procedure

  1. List Operator subscriptions:

    $ oc get subs -n <operator_namespace>
  2. Use the oc describe command to inspect a Subscription resource:

    $ oc describe sub <subscription_name> -n <operator_namespace>
  3. In the command output, find the Conditions section for the status of Operator subscription condition types. In the following example, the CatalogSourcesUnhealthy condition type has a status of false because all available catalog sources are healthy:

    Example output

    Conditions:
       Last Transition Time:  2019-07-29T13:42:57Z
       Message:               all available catalogsources are healthy
       Reason:                AllCatalogSourcesHealthy
       Status:                False
       Type:                  CatalogSourcesUnhealthy

Note

Default OpenShift Container Platform cluster Operators are managed by the Cluster Version Operator (CVO) and they do not have a Subscription object. Application Operators are managed by Operator Lifecycle Manager (OLM) and they have a Subscription object.

4.5.3. Viewing Operator catalog source status by using the CLI

You can view the status of an Operator catalog source by using the CLI.

Prerequisites

  • You have access to the cluster as a user with the cluster-admin role.
  • You have installed the OpenShift CLI (oc).

Procedure

  1. List the catalog sources in a namespace. For example, you can check the openshift-marketplace namespace, which is used for cluster-wide catalog sources:

    $ oc get catalogsources -n openshift-marketplace

    Example output

    NAME                  DISPLAY               TYPE   PUBLISHER   AGE
    certified-operators   Certified Operators   grpc   Red Hat     55m
    community-operators   Community Operators   grpc   Red Hat     55m
    example-catalog       Example Catalog       grpc   Example Org 2m25s
    redhat-marketplace    Red Hat Marketplace   grpc   Red Hat     55m
    redhat-operators      Red Hat Operators     grpc   Red Hat     55m

  2. Use the oc describe command to get more details and status about a catalog source:

    $ oc describe catalogsource example-catalog -n openshift-marketplace

    Example output

    Name:         example-catalog
    Namespace:    openshift-marketplace
    ...
    Status:
      Connection State:
        Address:              example-catalog.openshift-marketplace.svc:50051
        Last Connect:         2021-09-09T17:07:35Z
        Last Observed State:  TRANSIENT_FAILURE
      Registry Service:
        Created At:         2021-09-09T17:05:45Z
        Port:               50051
        Protocol:           grpc
        Service Name:       example-catalog
        Service Namespace:  openshift-marketplace

    In the preceding example output, the last observed state is TRANSIENT_FAILURE. This state indicates that there is a problem establishing a connection for the catalog source.

  3. List the pods in the namespace where your catalog source was created:

    $ oc get pods -n openshift-marketplace

    Example output

    NAME                                    READY   STATUS             RESTARTS   AGE
    certified-operators-cv9nn               1/1     Running            0          36m
    community-operators-6v8lp               1/1     Running            0          36m
    marketplace-operator-86bfc75f9b-jkgbc   1/1     Running            0          42m
    example-catalog-bwt8z                   0/1     ImagePullBackOff   0          3m55s
    redhat-marketplace-57p8c                1/1     Running            0          36m
    redhat-operators-smxx8                  1/1     Running            0          36m

    When a catalog source is created in a namespace, a pod for the catalog source is created in that namespace. In the preceding example output, the status for the example-catalog-bwt8z pod is ImagePullBackOff. This status indicates that there is an issue pulling the catalog source’s index image.

  4. Use the oc describe command to inspect a pod for more detailed information:

    $ oc describe pod example-catalog-bwt8z -n openshift-marketplace

    Example output

    Name:         example-catalog-bwt8z
    Namespace:    openshift-marketplace
    Priority:     0
    Node:         ci-ln-jyryyg2-f76d1-ggdbq-worker-b-vsxjd/10.0.128.2
    ...
    Events:
      Type     Reason          Age                From               Message
      ----     ------          ----               ----               -------
      Normal   Scheduled       48s                default-scheduler  Successfully assigned openshift-marketplace/example-catalog-bwt8z to ci-ln-jyryyf2-f76d1-fgdbq-worker-b-vsxjd
      Normal   AddedInterface  47s                multus             Add eth0 [10.131.0.40/23] from openshift-sdn
      Normal   BackOff         20s (x2 over 46s)  kubelet            Back-off pulling image "quay.io/example-org/example-catalog:v1"
      Warning  Failed          20s (x2 over 46s)  kubelet            Error: ImagePullBackOff
      Normal   Pulling         8s (x3 over 47s)   kubelet            Pulling image "quay.io/example-org/example-catalog:v1"
      Warning  Failed          8s (x3 over 47s)   kubelet            Failed to pull image "quay.io/example-org/example-catalog:v1": rpc error: code = Unknown desc = reading manifest v1 in quay.io/example-org/example-catalog: unauthorized: access to the requested resource is not authorized
      Warning  Failed          8s (x3 over 47s)   kubelet            Error: ErrImagePull

    In the preceding example output, the error messages indicate that the catalog source’s index image is failing to pull successfully because of an authorization issue. For example, the index image might be stored in a registry that requires login credentials.

4.6. Managing Operator conditions

As a cluster administrator, you can manage Operator conditions by using Operator Lifecycle Manager (OLM).

4.6.1. Overriding Operator conditions

As a cluster administrator, you might want to ignore a supported Operator condition reported by an Operator. When present, Operator conditions in the Spec.Overrides array override the conditions in the Spec.Conditions array, allowing cluster administrators to deal with situations where an Operator is incorrectly reporting a state to Operator Lifecycle Manager (OLM).

Note

By default, the Spec.Overrides array is not present in an OperatorCondition object until it is added by a cluster administrator. The Spec.Conditions array is also not present until it is either added by a user or as a result of custom Operator logic.

For example, consider a known version of an Operator that always communicates that it is not upgradeable. In this instance, you might want to upgrade the Operator despite the Operator communicating that it is not upgradeable. This could be accomplished by overriding the Operator condition by adding the condition type and status to the Spec.Overrides array in the OperatorCondition object.

Prerequisites

  • An Operator with an OperatorCondition object, installed using OLM.

Procedure

  1. Edit the OperatorCondition object for the Operator:

    $ oc edit operatorcondition <name>
  2. Add a Spec.Overrides array to the object:

    Example Operator condition override

    apiVersion: operators.coreos.com/v1
    kind: OperatorCondition
    metadata:
      name: my-operator
      namespace: operators
    spec:
      overrides:
      - type: Upgradeable 1
        status: "True"
        reason: "upgradeIsSafe"
        message: "This is a known issue with the Operator where it always reports that it cannot be upgraded."
      conditions:
      - type: Upgradeable
        status: "False"
        reason: "migration"
        message: "The operator is performing a migration."
        lastTransitionTime: "2020-08-24T23:15:55Z"

    1
    Allows the cluster administrator to change the upgrade readiness to True.

4.6.2. Updating your Operator to use Operator conditions

Operator Lifecycle Manager (OLM) automatically creates an OperatorCondition resource for each ClusterServiceVersion resource that it reconciles. All service accounts in the CSV are granted the RBAC to interact with the OperatorCondition owned by the Operator.

An Operator author can develop their Operator to use the operator-lib library such that, after the Operator has been deployed by OLM, it can set its own conditions. For more on writing logic to set Operator conditions as an Operator author, see the Operator SDK documentation.

4.6.2.1. Setting defaults

In an effort to remain backwards compatible, OLM treats the absence of an OperatorCondition resource as opting out of the condition. Therefore, an Operator that opts in to using Operator conditions should set default conditions before the ready probe for the pod is set to true. This provides the Operator with a grace period to update the condition to the correct state.

4.6.3. Additional resources

4.7. Allowing non-cluster administrators to install Operators

Cluster administrators can use Operator groups to allow regular users to install Operators.

Additional resources

4.7.1. Understanding Operator installation policy

Operators can require wide privileges to run, and the required privileges can change between versions. Operator Lifecycle Manager (OLM) runs with cluster-admin privileges. By default, Operator authors can specify any set of permissions in the cluster service version (CSV), and OLM consequently grants it to the Operator.

To ensure that an Operator cannot achieve cluster-scoped privileges and that users cannot escalate privileges using OLM, Cluster administrators can manually audit Operators before they are added to the cluster. Cluster administrators are also provided tools for determining and constraining which actions are allowed during an Operator installation or upgrade using service accounts.

Cluster administrators can associate an Operator group with a service account that has a set of privileges granted to it. The service account sets policy on Operators to ensure they only run within predetermined boundaries by using role-based access control (RBAC) rules. As a result, the Operator is unable to do anything that is not explicitly permitted by those rules.

By employing Operator groups, users with enough privileges can install Operators with a limited scope. As a result, more of the Operator Framework tools can safely be made available to more users, providing a richer experience for building applications with Operators.

Note

Role-based access control (RBAC) for Subscription objects is automatically granted to every user with the edit or admin role in a namespace. However, RBAC does not exist on OperatorGroup objects; this absence is what prevents regular users from installing Operators. Pre-installing Operator groups is effectively what gives installation privileges.

Keep the following points in mind when associating an Operator group with a service account:

  • The APIService and CustomResourceDefinition resources are always created by OLM using the cluster-admin role. A service account associated with an Operator group should never be granted privileges to write these resources.
  • Any Operator tied to this Operator group is now confined to the permissions granted to the specified service account. If the Operator asks for permissions that are outside the scope of the service account, the install fails with appropriate errors so the cluster administrator can troubleshoot and resolve the issue.

4.7.1.1. Installation scenarios

When determining whether an Operator can be installed or upgraded on a cluster, Operator Lifecycle Manager (OLM) considers the following scenarios:

  • A cluster administrator creates a new Operator group and specifies a service account. All Operator(s) associated with this Operator group are installed and run against the privileges granted to the service account.
  • A cluster administrator creates a new Operator group and does not specify any service account. OpenShift Container Platform maintains backward compatibility, so the default behavior remains and Operator installs and upgrades are permitted.
  • For existing Operator groups that do not specify a service account, the default behavior remains and Operator installs and upgrades are permitted.
  • A cluster administrator updates an existing Operator group and specifies a service account. OLM allows the existing Operator to continue to run with their current privileges. When such an existing Operator is going through an upgrade, it is reinstalled and run against the privileges granted to the service account like any new Operator.
  • A service account specified by an Operator group changes by adding or removing permissions, or the existing service account is swapped with a new one. When existing Operators go through an upgrade, it is reinstalled and run against the privileges granted to the updated service account like any new Operator.
  • A cluster administrator removes the service account from an Operator group. The default behavior remains and Operator installs and upgrades are permitted.

4.7.1.2. Installation workflow

When an Operator group is tied to a service account and an Operator is installed or upgraded, Operator Lifecycle Manager (OLM) uses the following workflow:

  1. The given Subscription object is picked up by OLM.
  2. OLM fetches the Operator group tied to this subscription.
  3. OLM determines that the Operator group has a service account specified.
  4. OLM creates a client scoped to the service account and uses the scoped client to install the Operator. This ensures that any permission requested by the Operator is always confined to that of the service account in the Operator group.
  5. OLM creates a new service account with the set of permissions specified in the CSV and assigns it to the Operator. The Operator runs as the assigned service account.

4.7.2. Scoping Operator installations

To provide scoping rules to Operator installations and upgrades on Operator Lifecycle Manager (OLM), associate a service account with an Operator group.

Using this example, a cluster administrator can confine a set of Operators to a designated namespace.

Procedure

  1. Create a new namespace:

    $ cat <<EOF | oc create -f -
    apiVersion: v1
    kind: Namespace
    metadata:
      name: scoped
    EOF
  2. Allocate permissions that you want the Operator(s) to be confined to. This involves creating a new service account, relevant role(s), and role binding(s).

    $ cat <<EOF | oc create -f -
    apiVersion: v1
    kind: ServiceAccount
    metadata:
      name: scoped
      namespace: scoped
    EOF

    The following example grants the service account permissions to do anything in the designated namespace for simplicity. In a production environment, you should create a more fine-grained set of permissions:

    $ cat <<EOF | oc create -f -
    apiVersion: rbac.authorization.k8s.io/v1
    kind: Role
    metadata:
      name: scoped
      namespace: scoped
    rules:
    - apiGroups: ["*"]
      resources: ["*"]
      verbs: ["*"]
    ---
    apiVersion: rbac.authorization.k8s.io/v1
    kind: RoleBinding
    metadata:
      name: scoped-bindings
      namespace: scoped
    roleRef:
      apiGroup: rbac.authorization.k8s.io
      kind: Role
      name: scoped
    subjects:
    - kind: ServiceAccount
      name: scoped
      namespace: scoped
    EOF
  3. Create an OperatorGroup object in the designated namespace. This Operator group targets the designated namespace to ensure that its tenancy is confined to it.

    In addition, Operator groups allow a user to specify a service account. Specify the service account created in the previous step:

    $ cat <<EOF | oc create -f -
    apiVersion: operators.coreos.com/v1
    kind: OperatorGroup
    metadata:
      name: scoped
      namespace: scoped
    spec:
      serviceAccountName: scoped
      targetNamespaces:
      - scoped
    EOF

    Any Operator installed in the designated namespace is tied to this Operator group and therefore to the service account specified.

  4. Create a Subscription object in the designated namespace to install an Operator:

    $ cat <<EOF | oc create -f -
    apiVersion: operators.coreos.com/v1alpha1
    kind: Subscription
    metadata:
      name: etcd
      namespace: scoped
    spec:
      channel: singlenamespace-alpha
      name: etcd
      source: <catalog_source_name> 1
      sourceNamespace: <catalog_source_namespace> 2
    EOF
    1
    Specify a catalog source that already exists in the designated namespace or one that is in the global catalog namespace.
    2
    Specify a namespace where the catalog source was created.

    Any Operator tied to this Operator group is confined to the permissions granted to the specified service account. If the Operator requests permissions that are outside the scope of the service account, the installation fails with relevant errors.

4.7.2.1. Fine-grained permissions

Operator Lifecycle Manager (OLM) uses the service account specified in an Operator group to create or update the following resources related to the Operator being installed:

  • ClusterServiceVersion
  • Subscription
  • Secret
  • ServiceAccount
  • Service
  • ClusterRole and ClusterRoleBinding
  • Role and RoleBinding

To confine Operators to a designated namespace, cluster administrators can start by granting the following permissions to the service account:

Note

The following role is a generic example and additional rules might be required based on the specific Operator.

kind: Role
rules:
- apiGroups: ["operators.coreos.com"]
  resources: ["subscriptions", "clusterserviceversions"]
  verbs: ["get", "create", "update", "patch"]
- apiGroups: [""]
  resources: ["services", "serviceaccounts"]
  verbs: ["get", "create", "update", "patch"]
- apiGroups: ["rbac.authorization.k8s.io"]
  resources: ["roles", "rolebindings"]
  verbs: ["get", "create", "update", "patch"]
- apiGroups: ["apps"] 1
  resources: ["deployments"]
  verbs: ["list", "watch", "get", "create", "update", "patch", "delete"]
- apiGroups: [""] 2
  resources: ["pods"]
  verbs: ["list", "watch", "get", "create", "update", "patch", "delete"]
1 2
Add permissions to create other resources, such as deployments and pods shown here.

In addition, if any Operator specifies a pull secret, the following permissions must also be added:

kind: ClusterRole 1
rules:
- apiGroups: [""]
  resources: ["secrets"]
  verbs: ["get"]
---
kind: Role
rules:
- apiGroups: [""]
  resources: ["secrets"]
  verbs: ["create", "update", "patch"]
1
Required to get the secret from the OLM namespace.

4.7.3. Operator catalog access control

When an Operator catalog is created in the global catalog namespace openshift-marketplace, the catalog’s Operators are made available cluster-wide to all namespaces. A catalog created in other namespaces only makes its Operators available in that same namespace of the catalog.

On clusters where non-cluster administrator users have been delegated Operator installation privileges, cluster administrators might want to further control or restrict the set of Operators those users are allowed to install. This can be achieved with the following actions:

  1. Disable all of the default global catalogs.
  2. Enable custom, curated catalogs in the same namespace where the relevant Operator groups have been pre-installed.

4.7.4. Troubleshooting permission failures

If an Operator installation fails due to lack of permissions, identify the errors using the following procedure.

Procedure

  1. Review the Subscription object. Its status has an object reference installPlanRef that points to the InstallPlan object that attempted to create the necessary [Cluster]Role[Binding] object(s) for the Operator:

    apiVersion: operators.coreos.com/v1
    kind: Subscription
    metadata:
      name: etcd
      namespace: scoped
    status:
      installPlanRef:
        apiVersion: operators.coreos.com/v1
        kind: InstallPlan
        name: install-4plp8
        namespace: scoped
        resourceVersion: "117359"
        uid: 2c1df80e-afea-11e9-bce3-5254009c9c23
  2. Check the status of the InstallPlan object for any errors:

    apiVersion: operators.coreos.com/v1
    kind: InstallPlan
    status:
      conditions:
      - lastTransitionTime: "2019-07-26T21:13:10Z"
        lastUpdateTime: "2019-07-26T21:13:10Z"
        message: 'error creating clusterrole etcdoperator.v0.9.4-clusterwide-dsfx4: clusterroles.rbac.authorization.k8s.io
          is forbidden: User "system:serviceaccount:scoped:scoped" cannot create resource
          "clusterroles" in API group "rbac.authorization.k8s.io" at the cluster scope'
        reason: InstallComponentFailed
        status: "False"
        type: Installed
      phase: Failed

    The error message tells you:

    • The type of resource it failed to create, including the API group of the resource. In this case, it was clusterroles in the rbac.authorization.k8s.io group.
    • The name of the resource.
    • The type of error: is forbidden tells you that the user does not have enough permission to do the operation.
    • The name of the user who attempted to create or update the resource. In this case, it refers to the service account specified in the Operator group.
    • The scope of the operation: cluster scope or not.

      The user can add the missing permission to the service account and then iterate.

      Note

      Operator Lifecycle Manager (OLM) does not currently provide the complete list of errors on the first try.

4.8. Managing custom catalogs

This guide describes how to work with custom catalogs for Operators packaged using the bundle format on Operator Lifecycle Manager (OLM) in OpenShift Container Platform.

Note

Support for the legacy package manifest format for Operators, including custom catalogs that were using the legacy format, is removed in OpenShift Container Platform 4.8 and later.

Important

Kubernetes periodically deprecates certain APIs that are removed in subsequent releases. As a result, Operators are unable to use removed APIs starting with the version of OpenShift Container Platform that uses the Kubernetes version that removed the API.

If your cluster is using custom catalogs, see Controlling Operator compatibility with OpenShift Container Platform versions for more details about how Operator authors can update their projects to help avoid workload issues and prevent incompatible upgrades.

4.8.1. Prerequisites

4.8.2. Creating an index image

You can create an index image using the opm CLI.

Prerequisites

  • opm version 1.12.3+
  • podman version 1.9.3+
  • A bundle image built and pushed to a registry that supports Docker v2-2

    Important

    The internal registry of the OpenShift Container Platform cluster cannot be used as the target registry because it does not support pushing without a tag, which is required during the mirroring process.

Procedure

  1. Start a new index:

    $ opm index add \
        --bundles <registry>/<namespace>/<bundle_image_name>:<tag> \1
        --tag <registry>/<namespace>/<index_image_name>:<tag> \2
        [--binary-image <registry_base_image>] 3
    1
    Comma-separated list of bundle images to add to the index.
    2
    The image tag that you want the index image to have.
    3
    Optional: An alternative registry base image to use for serving the catalog.
  2. Push the index image to a registry.

    1. If required, authenticate with your target registry:

      $ podman login <registry>
    2. Push the index image:

      $ podman push <registry>/<namespace>/<index_image_name>:<tag>

4.8.3. Creating a catalog from an index image

You can create an Operator catalog from an index image and apply it to an OpenShift Container Platform cluster for use with Operator Lifecycle Manager (OLM).

Prerequisites

  • An index image built and pushed to a registry.

Procedure

  1. Create a CatalogSource object that references your index image.

    1. Modify the following to your specifications and save it as a catalogSource.yaml file:

      apiVersion: operators.coreos.com/v1alpha1
      kind: CatalogSource
      metadata:
        name: my-operator-catalog
        namespace: openshift-marketplace 1
      spec:
        sourceType: grpc
        image: <registry>:<port>/<namespace>/redhat-operator-index:v4.8 2
        displayName: My Operator Catalog
        publisher: <publisher_name> 3
        updateStrategy:
          registryPoll: 4
            interval: 30m
      1
      If you want the catalog source to be available globally to users in all namespaces, specify the openshift-marketplace namespace. Otherwise, you can specify a different namespace for the catalog to be scoped and available only for that namespace.
      2
      Specify your index image.
      3
      Specify your name or an organization name publishing the catalog.
      4
      Catalog sources can automatically check for new versions to keep up to date.
    2. Use the file to create the CatalogSource object:

      $ oc apply -f catalogSource.yaml
  2. Verify the following resources are created successfully.

    1. Check the pods:

      $ oc get pods -n openshift-marketplace

      Example output

      NAME                                    READY   STATUS    RESTARTS  AGE
      my-operator-catalog-6njx6               1/1     Running   0         28s
      marketplace-operator-d9f549946-96sgr    1/1     Running   0         26h

    2. Check the catalog source:

      $ oc get catalogsource -n openshift-marketplace

      Example output

      NAME                  DISPLAY               TYPE PUBLISHER  AGE
      my-operator-catalog   My Operator Catalog   grpc            5s

    3. Check the package manifest:

      $ oc get packagemanifest -n openshift-marketplace

      Example output

      NAME                          CATALOG               AGE
      jaeger-product                My Operator Catalog   93s

You can now install the Operators from the OperatorHub page on your OpenShift Container Platform web console.

Additional resources

4.8.4. Updating an index image

After configuring OperatorHub to use a catalog source that references a custom index image, cluster administrators can keep the available Operators on their cluster up to date by adding bundle images to the index image.

You can update an existing index image using the opm index add command.

Prerequisites

  • opm version 1.12.3+
  • podman version 1.9.3+
  • An index image built and pushed to a registry.
  • An existing catalog source referencing the index image.

Procedure

  1. Update the existing index by adding bundle images:

    $ opm index add \
        --bundles <registry>/<namespace>/<new_bundle_image>@sha256:<digest> \1
        --from-index <registry>/<namespace>/<existing_index_image>:<existing_tag> \2
        --tag <registry>/<namespace>/<existing_index_image>:<updated_tag> \3
        --pull-tool podman 4
    1
    The --bundles flag specifies a comma-separated list of additional bundle images to add to the index.
    2
    The --from-index flag specifies the previously pushed index.
    3
    The --tag flag specifies the image tag to apply to the updated index image.
    4
    The --pull-tool flag specifies the tool used to pull container images.

    where:

    <registry>
    Specifies the hostname of the registry, such as quay.io or mirror.example.com.
    <namespace>
    Specifies the namespace of the registry, such as ocs-dev or abc.
    <new_bundle_image>
    Specifies the new bundle image to add to the registry, such as ocs-operator.
    <digest>
    Specifies the SHA image ID, or digest, of the bundle image, such as c7f11097a628f092d8bad148406aa0e0951094a03445fd4bc0775431ef683a41.
    <existing_index_image>
    Specifies the previously pushed image, such as abc-redhat-operator-index.
    <existing_tag>
    Specifies a previously pushed image tag, such as 4.8.
    <updated_tag>
    Specifies the image tag to apply to the updated index image, such as 4.8.1.

    Example command

    $ opm index add \
        --bundles quay.io/ocs-dev/ocs-operator@sha256:c7f11097a628f092d8bad148406aa0e0951094a03445fd4bc0775431ef683a41 \
        --from-index mirror.example.com/abc/abc-redhat-operator-index:4.8 \
        --tag mirror.example.com/abc/abc-redhat-operator-index:4.8.1 \
        --pull-tool podman

  2. Push the updated index image:

    $ podman push <registry>/<namespace>/<existing_index_image>:<updated_tag>
  3. After Operator Lifecycle Manager (OLM) automatically polls the index image referenced in the catalog source at its regular interval, verify that the new packages are successfully added:

    $ oc get packagemanifests -n openshift-marketplace

4.8.5. Pruning an index image

An index image, based on the Operator bundle format, is a containerized snapshot of an Operator catalog. You can prune an index of all but a specified list of packages, which creates a copy of the source index containing only the Operators that you want.

Prerequisites

  • podman version 1.9.3+
  • grpcurl (third-party command-line tool)
  • opm version 1.18.0+
  • Access to a registry that supports Docker v2-2

    Important

    The internal registry of the OpenShift Container Platform cluster cannot be used as the target registry because it does not support pushing without a tag, which is required during the mirroring process.

Procedure

  1. Authenticate with your target registry:

    $ podman login <target_registry>
  2. Determine the list of packages you want to include in your pruned index.

    1. Run the source index image that you want to prune in a container. For example:

      $ podman run -p50051:50051 \
          -it registry.redhat.io/redhat/redhat-operator-index:v4.8

      Example output

      Trying to pull registry.redhat.io/redhat/redhat-operator-index:v4.8...
      Getting image source signatures
      Copying blob ae8a0c23f5b1 done
      ...
      INFO[0000] serving registry                              database=/database/index.db port=50051

    2. In a separate terminal session, use the grpcurl command to get a list of the packages provided by the index:

      $ grpcurl -plaintext localhost:50051 api.Registry/ListPackages > packages.out
    3. Inspect the packages.out file and identify which package names from this list you want to keep in your pruned index. For example:

      Example snippets of packages list

      ...
      {
        "name": "advanced-cluster-management"
      }
      ...
      {
        "name": "jaeger-product"
      }
      ...
      {
      {
        "name": "quay-operator"
      }
      ...

    4. In the terminal session where you executed the podman run command, press Ctrl and C to stop the container process.
  3. Run the following command to prune the source index of all but the specified packages:

    $ opm index prune \
        -f registry.redhat.io/redhat/redhat-operator-index:v4.8 \1
        -p advanced-cluster-management,jaeger-product,quay-operator \2
        [-i registry.redhat.io/openshift4/ose-operator-registry:v4.8] \3
        -t <target_registry>:<port>/<namespace>/redhat-operator-index:v4.8 4
    1
    Index to prune.
    2
    Comma-separated list of packages to keep.
    3
    Required only for IBM Power Systems and IBM Z images: Operator Registry base image with the tag that matches the target OpenShift Container Platform cluster major and minor version.
    4
    Custom tag for new index image being built.
  4. Run the following command to push the new index image to your target registry:

    $ podman push <target_registry>:<port>/<namespace>/redhat-operator-index:v4.8

    where <namespace> is any existing namespace on the registry.

4.8.6. Accessing images for Operators from private registries

If certain images relevant to Operators managed by Operator Lifecycle Manager (OLM) are hosted in an authenticated container image registry, also known as a private registry, OLM and OperatorHub are unable to pull the images by default. To enable access, you can create a pull secret that contains the authentication credentials for the registry. By referencing one or more pull secrets in a catalog source, OLM can handle placing the secrets in the Operator and catalog namespace to allow installation.

Other images required by an Operator or its Operands might require access to private registries as well. OLM does not handle placing the secrets in target tenant namespaces for this scenario, but authentication credentials can be added to the global cluster pull secret or individual namespace service accounts to enable the required access.

The following types of images should be considered when determining whether Operators managed by OLM have appropriate pull access:

Index images
A CatalogSource object can reference an index image, which use the Operator bundle format and are catalog sources packaged as container images hosted in images registries. If an index image is hosted in a private registry, a secret can be used to enable pull access.
Bundle images
Operator bundle images are metadata and manifests packaged as container images that represent a unique version of an Operator. If any bundle images referenced in a catalog source are hosted in one or more private registries, a secret can be used to enable pull access.
Operator and Operand images

If an Operator installed from a catalog source uses a private image, either for the Operator image itself or one of the Operand images it watches, the Operator will fail to install because the deployment will not have access to the required registry authentication. Referencing secrets in a catalog source does not enable OLM to place the secrets in target tenant namespaces in which Operands are installed.

Instead, the authentication details can be added to the global cluster pull secret in the openshift-config namespace, which provides access to all namespaces on the cluster. Alternatively, if providing access to the entire cluster is not permissible, the pull secret can be added to the default service accounts of the target tenant namespaces.

Prerequisites

  • At least one of the following hosted in a private registry:

    • An index image or catalog image.
    • An Operator bundle image.
    • An Operator or Operand image.

Procedure

  1. Create a secret for each required private registry.

    1. Log in to the private registry to create or update your registry credentials file:

      $ podman login <registry>:<port>
      Note

      The file path of your registry credentials can be different depending on the container tool used to log in to the registry. For the podman CLI, the default location is ${XDG_RUNTIME_DIR}/containers/auth.json. For the docker CLI, the default location is /root/.docker/config.json.

    2. It is recommended to include credentials for only one registry per secret, and manage credentials for multiple registries in separate secrets. Multiple secrets can be included in a CatalogSource object in later steps, and OpenShift Container Platform will merge the secrets into a single virtual credentials file for use during an image pull.

      A registry credentials file can, by default, store details for more than one registry. Verify the current contents of your file. For example:

      File storing credentials for two registries

      {
              "auths": {
                      "registry.redhat.io": {
                              "auth": "FrNHNydQXdzclNqdg=="
                      },
                      "quay.io": {
                              "auth": "Xd2lhdsbnRib21iMQ=="
                      }
              }
      }

      Because this file is used to create secrets in later steps, ensure that you are storing details for only one registry per file. This can be accomplished by using either of the following methods:

      • Use the podman logout <registry> command to remove credentials for additional registries until only the one registry you want remains.
      • Edit your registry credentials file and separate the registry details to be stored in multiple files. For example:

        File storing credentials for one registry

        {
                "auths": {
                        "registry.redhat.io": {
                                "auth": "FrNHNydQXdzclNqdg=="
                        }
                }
        }

        File storing credentials for another registry

        {
                "auths": {
                        "quay.io": {
                                "auth": "Xd2lhdsbnRib21iMQ=="
                        }
                }
        }

    3. Create a secret in the openshift-marketplace namespace that contains the authentication credentials for a private registry:

      $ oc create secret generic <secret_name> \
          -n openshift-marketplace \
          --from-file=.dockerconfigjson=<path/to/registry/credentials> \
          --type=kubernetes.io/dockerconfigjson

      Repeat this step to create additional secrets for any other required private registries, updating the --from-file flag to specify another registry credentials file path.

  2. Create or update an existing CatalogSource object to reference one or more secrets:

    apiVersion: operators.coreos.com/v1alpha1
    kind: CatalogSource
    metadata:
      name: my-operator-catalog
      namespace: openshift-marketplace
    spec:
      sourceType: grpc
      secrets: 1
      - "<secret_name_1>"
      - "<secret_name_2>"
      image: <registry>:<port>/<namespace>/<image>:<tag>
      displayName: My Operator Catalog
      publisher: <publisher_name>
      updateStrategy:
        registryPoll:
          interval: 30m
    1
    Add a spec.secrets section and specify any required secrets.
  3. If any Operator or Operand images that are referenced by a subscribed Operator require access to a private registry, you can either provide access to all namespaces in the cluster, or individual target tenant namespaces.

    • To provide access to all namespaces in the cluster, add authentication details to the global cluster pull secret in the openshift-config namespace.

      Warning

      Cluster resources must adjust to the new global pull secret, which can temporarily limit the usability of the cluster.

      1. Extract the .dockerconfigjson file from the global pull secret:

        $ oc extract secret/pull-secret -n openshift-config --confirm
      2. Update the .dockerconfigjson file with your authentication credentials for the required private registry or registries and save it as a new file:

        $ cat .dockerconfigjson | \
            jq --compact-output '.auths["<registry>:<port>/<namespace>/"] |= . + {"auth":"<token>"}' \1
            > new_dockerconfigjson
        1
        Replace <registry>:<port>/<namespace> with the private registry details and <token> with your authentication credentials.
      3. Update the global pull secret with the new file:

        $ oc set data secret/pull-secret -n openshift-config \
            --from-file=.dockerconfigjson=new_dockerconfigjson
    • To update an individual namespace, add a pull secret to the service account for the Operator that requires access in the target tenant namespace.

      1. Recreate the secret that you created for the openshift-marketplace in the tenant namespace:

        $ oc create secret generic <secret_name> \
            -n <tenant_namespace> \
            --from-file=.dockerconfigjson=<path/to/registry/credentials> \
            --type=kubernetes.io/dockerconfigjson
      2. Verify the name of the service account for the Operator by searching the tenant namespace:

        $ oc get sa -n <tenant_namespace> 1
        1
        If the Operator was installed in an individual namespace, search that namespace. If the Operator was installed for all namespaces, search the openshift-operators namespace.

        Example output

        NAME            SECRETS   AGE
        builder         2         6m1s
        default         2         6m1s
        deployer        2         6m1s
        etcd-operator   2         5m18s 1

        1
        Service account for an installed etcd Operator.
      3. Link the secret to the service account for the Operator:

        $ oc secrets link <operator_sa> \
            -n <tenant_namespace> \
             <secret_name> \
            --for=pull

Additional resources

4.8.7. Disabling the default OperatorHub sources

Operator catalogs that source content provided by Red Hat and community projects are configured for OperatorHub by default during an OpenShift Container Platform installation. As a cluster administrator, you can disable the set of default catalogs.

Procedure

  • Disable the sources for the default catalogs by adding disableAllDefaultSources: true to the OperatorHub object:

    $ oc patch OperatorHub cluster --type json \
        -p '[{"op": "add", "path": "/spec/disableAllDefaultSources", "value": true}]'
Tip

Alternatively, you can use the web console to manage catalog sources. From the AdministrationCluster SettingsGlobal ConfigurationOperatorHub page, click the Sources tab, where you can create, delete, disable, and enable individual sources.

4.8.8. Removing custom catalogs

As a cluster administrator, you can remove custom Operator catalogs that have been previously added to your cluster by deleting the related catalog source.

Procedure

  1. In the Administrator perspective of the web console, navigate to AdministrationCluster Settings.
  2. Click the Global Configuration tab, and then click OperatorHub.
  3. Click the Sources tab.
  4. Select the Options menu kebab for the catalog that you want to remove, and then click Delete CatalogSource.

4.9. Using Operator Lifecycle Manager on restricted networks

For OpenShift Container Platform clusters that are installed on restricted networks, also known as disconnected clusters, Operator Lifecycle Manager (OLM) by default cannot access the Red Hat-provided OperatorHub sources hosted on remote registries because those remote sources require full internet connectivity.

However, as a cluster administrator you can still enable your cluster to use OLM in a restricted network if you have a workstation that has full internet access. The workstation, which requires full internet access to pull the remote OperatorHub content, is used to prepare local mirrors of the remote sources, and push the content to a mirror registry.

The mirror registry can be located on a bastion host, which requires connectivity to both your workstation and the disconnected cluster, or a completely disconnected, or airgapped, host, which requires removable media to physically move the mirrored content to the disconnected environment.

This guide describes the following process that is required to enable OLM in restricted networks:

  • Disable the default remote OperatorHub sources for OLM.
  • Use a workstation with full internet access to create and push local mirrors of the OperatorHub content to a mirror registry.
  • Configure OLM to install and manage Operators from local sources on the mirror registry instead of the default remote sources.

After enabling OLM in a restricted network, you can continue to use your unrestricted workstation to keep your local OperatorHub sources updated as newer versions of Operators are released.

Important

While OLM can manage Operators from local sources, the ability for a given Operator to run successfully in a restricted network still depends on the Operator itself. The Operator must:

  • List any related images, or other container images that the Operator might require to perform their functions, in the relatedImages parameter of its ClusterServiceVersion (CSV) object.
  • Reference all specified images by a digest (SHA) and not by a tag.

You can search on the Red Hat Ecosystem Catalog for a list of Red Hat Operators that support running in disconnected mode by selecting the Disconnected filter under Infrastucture Features:

https://catalog.redhat.com/software/operators/search

4.9.1. Prerequisites

  • Log in to your OpenShift Container Platform cluster as a user with cluster-admin privileges.
  • If you want to prune the default catalog and selectively mirror only a subset of Operators, install the opm CLI.
Note

If you are using OLM in a restricted network on IBM Z, you must have at least 12 GB allocated to the directory where you place your registry.

4.9.2. Disabling the default OperatorHub sources

Operator catalogs that source content provided by Red Hat and community projects are configured for OperatorHub by default during an OpenShift Container Platform installation. In a restricted network environment, you must disable the default catalogs as a cluster administrator. You can then configure OperatorHub to use local catalog sources.

Procedure

  • Disable the sources for the default catalogs by adding disableAllDefaultSources: true to the OperatorHub object:

    $ oc patch OperatorHub cluster --type json \
        -p '[{"op": "add", "path": "/spec/disableAllDefaultSources", "value": true}]'
Tip

Alternatively, you can use the web console to manage catalog sources. From the AdministrationCluster SettingsGlobal ConfigurationOperatorHub page, click the Sources tab, where you can create, delete, disable, and enable individual sources.

4.9.3. Pruning an index image

An index image, based on the Operator bundle format, is a containerized snapshot of an Operator catalog. You can prune an index of all but a specified list of packages, which creates a copy of the source index containing only the Operators that you want.

When configuring Operator Lifecycle Manager (OLM) to use mirrored content on restricted network OpenShift Container Platform clusters, use this pruning method if you want to only mirror a subset of Operators from the default catalogs.

For the steps in this procedure, the target registry is an existing mirror registry that is accessible by your workstation with unrestricted network access. This example also shows pruning the index image for the default redhat-operators catalog, but the process is the same for any index image.

Prerequisites

  • Workstation with unrestricted network access
  • podman version 1.9.3+
  • grpcurl (third-party command-line tool)
  • opm version 1.18.0+
  • Access to a registry that supports Docker v2-2

    Important

    The internal registry of the OpenShift Container Platform cluster cannot be used as the target registry because it does not support pushing without a tag, which is required during the mirroring process.

Procedure

  1. Authenticate with registry.redhat.io:

    $ podman login registry.redhat.io
  2. Authenticate with your target registry:

    $ podman login <target_registry>
  3. Determine the list of packages you want to include in your pruned index.

    1. Run the source index image that you want to prune in a container. For example:

      $ podman run -p50051:50051 \
          -it registry.redhat.io/redhat/redhat-operator-index:v4.8

      Example output

      Trying to pull registry.redhat.io/redhat/redhat-operator-index:v4.8...
      Getting image source signatures
      Copying blob ae8a0c23f5b1 done
      ...
      INFO[0000] serving registry                              database=/database/index.db port=50051

    2. In a separate terminal session, use the grpcurl command to get a list of the packages provided by the index:

      $ grpcurl -plaintext localhost:50051 api.Registry/ListPackages > packages.out
    3. Inspect the packages.out file and identify which package names from this list you want to keep in your pruned index. For example:

      Example snippets of packages list

      ...
      {
        "name": "advanced-cluster-management"
      }
      ...
      {
        "name": "jaeger-product"
      }
      ...
      {
      {
        "name": "quay-operator"
      }
      ...

    4. In the terminal session where you executed the podman run command, press Ctrl and C to stop the container process.
  4. Run the following command to prune the source index of all but the specified packages:

    $ opm index prune \
        -f registry.redhat.io/redhat/redhat-operator-index:v4.8 \1
        -p advanced-cluster-management,jaeger-product,quay-operator \2
        [-i registry.redhat.io/openshift4/ose-operator-registry:v4.8] \3
        -t <target_registry>:<port>/<namespace>/redhat-operator-index:v4.8 4
    1
    Index to prune.
    2
    Comma-separated list of packages to keep.
    3
    Required only for IBM Power Systems and IBM Z images: Operator Registry base image with the tag that matches the target OpenShift Container Platform cluster major and minor version.
    4
    Custom tag for new index image being built.
  5. Run the following command to push the new index image to your target registry:

    $ podman push <target_registry>:<port>/<namespace>/redhat-operator-index:v4.8

    where <namespace> is any existing namespace on the registry. For example, you might create an olm-mirror namespace to push all mirrored content to.

4.9.4. Mirroring an Operator catalog

You can mirror the Operator content of a Red Hat-provided catalog, or a custom catalog, into a container image registry using the oc adm catalog mirror command. The target registry must support Docker v2-2. For a cluster on a restricted network, this registry can be one that the cluster has network access to, such as a mirror registry created during a restricted network cluster installation.

Important

The internal registry of the OpenShift Container Platform cluster cannot be used as the target registry because it does not support pushing without a tag, which is required during the mirroring process.

The oc adm catalog mirror command also automatically mirrors the index image that is specified during the mirroring process, whether it be a Red Hat-provided index image or your own custom-built index image, to the target registry. You can then use the mirrored index image to create a catalog source that allows Operator Lifecycle Manager (OLM) to load the mirrored catalog onto your OpenShift Container Platform cluster.

Prerequisites

  • Workstation with unrestricted network access.
  • podman version 1.9.3 or later.
  • Access to mirror registry that supports Docker v2-2.
  • Decide which namespace on your mirror registry you will use to store the mirrored Operator content. For example, you might create an olm-mirror namespace.
  • If your mirror registry does not have Internet access, connect removable media to your workstation with unrestricted network access.
  • If you are working with private registries, including registry.redhat.io, set the REG_CREDS environment variable to the file path of your registry credentials for use in later steps. For example, for the podman CLI:

    $ REG_CREDS=${XDG_RUNTIME_DIR}/containers/auth.json

Procedure

  1. If you want to mirror a Red Hat-provided catalog, run the following command on your workstation with unrestricted network access to authenticate with registry.redhat.io:

    $ podman login registry.redhat.io
  2. The oc adm catalog mirror command extracts the contents of an index image to generate the manifests required for mirroring. The default behavior of the command generates manifests, then automatically mirrors all of the image content from the index image, as well as the index image itself, to your mirror registry. Alternatively, if your mirror registry is on a completely disconnected, or airgapped, host, you can first mirror the content to removable media, move the media to the disconnected environment, then mirror the content from the media to the registry.

    • Option A: If your mirror registry is on the same network as your workstation with unrestricted network access, take the following actions on your workstation:

      1. If your mirror registry requires authentication, run the following command to log in to the registry:

        $ podman login <mirror_registry>
      2. Run the following command to mirror the content:

        $ oc adm catalog mirror \
            <index_image> \1
            <mirror_registry>:<port>/<namespace> \2
            [-a ${REG_CREDS}] \3
            [--insecure] \4
            [--index-filter-by-os='<platform>/<arch>'] \5
            [--manifests-only] 6
        1
        Specify the index image for the catalog you want to mirror. For example, this might be a pruned index image that you created previously, or one of the source index images for the default catalogs, such as registry.redhat.io/redhat/redhat-operator-index:v4.8.
        2
        Specify the fully qualified domain name (FQDN) for the target registry and namespace to mirror the Operator content to, where <namespace> is any existing namespace on the registry. For example, you might create an olm-mirror namespace to push all mirrored content to.
        3
        Optional: If required, specify the location of your registry credentials file. {REG_CREDS} is required for registry.redhat.io.
        4
        Optional: If you do not want to configure trust for the target registry, add the --insecure flag.
        5
        Optional: Specify which platform and architecture of the index image to select when multiple variants are available. Images are passed as '<platform>/<arch>[/<variant>]'. This does not apply to images referenced by the index. Valid values are linux/amd64, linux/ppc64le, linux/s390x, and .*
        6
        Optional: Generate only the manifests required for mirroring, and do not actually mirror the image content to a registry. This option can be useful for reviewing what will be mirrored, and it allows you to make any changes to the mapping list if you require only a subset of packages. You can then use the mapping.txt file with the oc image mirror command to mirror the modified list of images in a later step. This flag is intended for only advanced selective mirroring of content from the catalog; the opm index prune command, if you used it previously to prune the index image, is suitable for most catalog management use cases.

        Example output

        src image has index label for database path: /database/index.db
        using database path mapping: /database/index.db:/tmp/153048078
        wrote database to /tmp/153048078 1
        ...
        wrote mirroring manifests to manifests-redhat-operator-index-1614211642 2

        1
        Directory for the temporary index.db database generated by the command.
        2
        Be sure to record the manifests directory name that is generated. This directory name is used in a later step.
        Note

        Red Hat Quay does not support nested repositories. As a result, running the oc adm catalog mirror command will fail with a 401 unauthorized error. As a workaround, you can use the --max-components=2 option when running the oc adm catalog mirror command to disable the creation of nested repositories. For more information on this workaround, see the Unauthorized error thrown while using catalog mirror command with Quay registry Knowledgebase Solution article.

    • Option B: If your mirror registry is on a disconnected host, take the following actions.

      1. Run the following command on your workstation with unrestricted network access to mirror the content to local files:

        $ oc adm catalog mirror \
            <index_image> \1
            file:///local/index \2
            [-a ${REG_CREDS}] \
            [--insecure] \
            [--index-filter-by-os='<platform>/<arch>']
        1
        Specify the index image for the catalog you want to mirror. For example, this might be a pruned index image that you created previously, or one of the source index images for the default catalogs, such as registry.redhat.io/redhat/redhat-operator-index:v4.8.
        2
        Mirrors content to local files in your current directory.

        Example output

        ...
        info: Mirroring completed in 5.93s (5.915MB/s)
        wrote mirroring manifests to manifests-my-index-1614985528 1
        
        To upload local images to a registry, run:
        
        	oc adm catalog mirror file://local/index/myrepo/my-index:v1 REGISTRY/REPOSITORY 2

        1
        Be sure to record the manifests directory name that is generated. This directory name is used in a later step.
        2
        Record the expanded file:// path that based on your provided index image. This path is used in a later step.
      2. Copy the v2/ directory that is generated in your current directory to removable media.
      3. Physically remove the media and attach it to a host in the disconnected environment that has access to the mirror registry.
      4. If your mirror registry requires authentication, run the following command on your host in the disconnected environment to log in to the registry:

        $ podman login <mirror_registry>
      5. Run the following command from the parent directory containing the v2/ directory to upload the images from local files to the mirror registry:

        $ oc adm catalog mirror \
            file://local/index/<repo>/<index_image>:<tag> \1
            <mirror_registry>:<port>/<namespace> \2
            [-a ${REG_CREDS}] \
            [--insecure] \
            [--index-filter-by-os='<platform>/<arch>']
        1
        Specify the file:// path from the previous command output.
        2
        Specify the fully qualified domain name (FQDN) for the target registry and namespace to mirror the Operator content to, where <namespace> is any existing namespace on the registry. For example, you might create an olm-mirror namespace to push all mirrored content to.
        Note

        Red Hat Quay does not support nested repositories. As a result, running the oc adm catalog mirror command will fail with a 401 unauthorized error. As a workaround, you can use the --max-components=2 option when running the oc adm catalog mirror command to disable the creation of nested repositories. For more information on this workaround, see the Unauthorized error thrown while using catalog mirror command with Quay registry Knowledgebase Solution article.

      6. Run the oc adm catalog mirror command again. Use the newly mirrored index image as the source and the same mirror registry namespace used in the previous step as the target:

        $ oc adm catalog mirror \
            <mirror_registry>:<port>/<index_image> \
            <mirror_registry>:<port>/<namespace> \
            --manifests-only \1
            [-a ${REG_CREDS}] \
            [--insecure]
        1
        The --manifests-only flag is required for this step so that the command does not copy all of the mirrored content again.
        Important

        This step is required because the image mappings in the imageContentSourcePolicy.yaml file generated during the previous step must be updated from local paths to valid mirror locations. Failure to do so will cause errors when you create the ImageContentSourcePolicy object in a later step.

  3. After mirroring the content to your registry, inspect the manifests directory that is generated in your current directory.

    Note

    The manifests directory name is used in a later step.

    If you mirrored content to a registry on the same network in the previous step, the directory name takes the following form:

    manifests-<index_image_name>-<random_number>

    If you mirrored content to a registry on a disconnected host in the previous step, the directory name takes the following form:

    manifests-index/<namespace>/<index_image_name>-<random_number>

    The manifests directory contains the following files, some of which might require further modification:

    • The catalogSource.yaml file is a basic definition for a CatalogSource object that is pre-populated with your index image tag and other relevant metadata. This file can be used as is or modified to add the catalog source to your cluster.

      Important

      If you mirrored the content to local files, you must modify your catalogSource.yaml file to remove any backslash (/) characters from the metadata.name field. Otherwise, when you attempt to create the object, it fails with an "invalid resource name" error.

    • The imageContentSourcePolicy.yaml file defines an ImageContentSourcePolicy object that can configure nodes to translate between the image references stored in Operator manifests and the mirrored registry.

      Note

      If your cluster uses an ImageContentSourcePolicy object to configure repository mirroring, you can use only global pull secrets for mirrored registries. You cannot add a pull secret to a project.

    • The mapping.txt file contains all of the source images and where to map them in the target registry. This file is compatible with the oc image mirror command and can be used to further customize the mirroring configuration.

      Important

      If you used the --manifests-only flag during the mirroring process and want to further trim the subset of packages to be mirrored, see the steps in the Mirroring a package manifest format catalog image procedure of the OpenShift Container Platform 4.7 documentation about modifying your mapping.txt file and using the file with the oc image mirror command. After following those further actions, you can continue this procedure.

  4. On a host with access to the disconnected cluster, create the ImageContentSourcePolicy (ICSP) object by running the following command to specify the imageContentSourcePolicy.yaml file in your manifests directory:

    $ oc create -f <path/to/manifests/dir>/imageContentSourcePolicy.yaml

    where <path/to/manifests/dir> is the path to the manifests directory for your mirrored content.

    You can now create a CatalogSource object to reference your mirrored index image and Operator content.

4.9.5. Creating a catalog from an index image

You can create an Operator catalog from an index image and apply it to an OpenShift Container Platform cluster for use with Operator Lifecycle Manager (OLM).

Prerequisites

  • An index image built and pushed to a registry.

Procedure

  1. Create a CatalogSource object that references your index image. If you used the oc adm catalog mirror command to mirror your catalog to a target registry, you can use the generated catalogSource.yaml file as a starting point.

    1. Modify the following to your specifications and save it as a catalogSource.yaml file:

      apiVersion: operators.coreos.com/v1alpha1
      kind: CatalogSource
      metadata:
        name: my-operator-catalog 1
        namespace: openshift-marketplace 2
      spec:
        sourceType: grpc
        image: <registry>:<port>/<namespace>/redhat-operator-index:v4.8 3
        displayName: My Operator Catalog
        publisher: <publisher_name> 4
        updateStrategy:
          registryPoll: 5
            interval: 30m
      1
      If you mirrored content to local files before uploading to a registry, remove any backslash (/) characters from the metadata.name field to avoid an "invalid resource name" error when you create the object.
      2
      If you want the catalog source to be available globally to users in all namespaces, specify the openshift-marketplace namespace. Otherwise, you can specify a different namespace for the catalog to be scoped and available only for that namespace.
      3
      Specify your index image.
      4
      Specify your name or an organization name publishing the catalog.
      5
      Catalog sources can automatically check for new versions to keep up to date.
    2. Use the file to create the CatalogSource object:

      $ oc apply -f catalogSource.yaml
  2. Verify the following resources are created successfully.

    1. Check the pods:

      $ oc get pods -n openshift-marketplace

      Example output

      NAME                                    READY   STATUS    RESTARTS  AGE
      my-operator-catalog-6njx6               1/1     Running   0         28s
      marketplace-operator-d9f549946-96sgr    1/1     Running   0         26h

    2. Check the catalog source:

      $ oc get catalogsource -n openshift-marketplace

      Example output

      NAME                  DISPLAY               TYPE PUBLISHER  AGE
      my-operator-catalog   My Operator Catalog   grpc            5s

    3. Check the package manifest:

      $ oc get packagemanifest -n openshift-marketplace

      Example output

      NAME                          CATALOG               AGE
      jaeger-product                My Operator Catalog   93s

You can now install the Operators from the OperatorHub page on your OpenShift Container Platform web console.

Additional resources

4.9.6. Updating an index image

After configuring OperatorHub to use a catalog source that references a custom index image, cluster administrators can keep the available Operators on their cluster up to date by adding bundle images to the index image.

You can update an existing index image using the opm index add command. For restricted networks, the updated content must also be mirrored again to the cluster.

Prerequisites

  • opm version 1.12.3+
  • podman version 1.9.3+
  • An index image built and pushed to a registry.
  • An existing catalog source referencing the index image.

Procedure

  1. Update the existing index by adding bundle images:

    $ opm index add \
        --bundles <registry>/<namespace>/<new_bundle_image>@sha256:<digest> \1
        --from-index <registry>/<namespace>/<existing_index_image>:<existing_tag> \2
        --tag <registry>/<namespace>/<existing_index_image>:<updated_tag> \3
        --pull-tool podman 4
    1
    The --bundles flag specifies a comma-separated list of additional bundle images to add to the index.
    2
    The --from-index flag specifies the previously pushed index.
    3
    The --tag flag specifies the image tag to apply to the updated index image.
    4
    The --pull-tool flag specifies the tool used to pull container images.

    where:

    <registry>
    Specifies the hostname of the registry, such as quay.io or mirror.example.com.
    <namespace>
    Specifies the namespace of the registry, such as ocs-dev or abc.
    <new_bundle_image>
    Specifies the new bundle image to add to the registry, such as ocs-operator.
    <digest>
    Specifies the SHA image ID, or digest, of the bundle image, such as c7f11097a628f092d8bad148406aa0e0951094a03445fd4bc0775431ef683a41.
    <existing_index_image>
    Specifies the previously pushed image, such as abc-redhat-operator-index.
    <existing_tag>
    Specifies a previously pushed image tag, such as 4.8.
    <updated_tag>
    Specifies the image tag to apply to the updated index image, such as 4.8.1.

    Example command

    $ opm index add \
        --bundles quay.io/ocs-dev/ocs-operator@sha256:c7f11097a628f092d8bad148406aa0e0951094a03445fd4bc0775431ef683a41 \
        --from-index mirror.example.com/abc/abc-redhat-operator-index:4.8 \
        --tag mirror.example.com/abc/abc-redhat-operator-index:4.8.1 \
        --pull-tool podman

  2. Push the updated index image:

    $ podman push <registry>/<namespace>/<existing_index_image>:<updated_tag>
  3. Follow the steps in the Mirroring an Operator catalog procedure again to mirror the updated content. However, when you get to the step about creating the ImageContentSourcePolicy (ICSP) object, use the oc replace command instead of the oc create command. For example:

    $ oc replace -f ./manifests-redhat-operator-index-<random_number>/imageContentSourcePolicy.yaml

    This change is required because the object already exists and must be updated.

    Note

    Normally, the oc apply command can be used to update existing objects that were previously created using oc apply. However, due to a known issue regarding the size of the metadata.annotations field in ICSP objects, the oc replace command must be used for this step currently.

  4. After Operator Lifecycle Manager (OLM) automatically polls the index image referenced in the catalog source at its regular interval, verify that the new packages are successfully added:

    $ oc get packagemanifests -n openshift-marketplace

Additional resources

Chapter 5. Developing Operators

5.1. About the Operator SDK

The Operator Framework is an open source toolkit to manage Kubernetes native applications, called Operators, in an effective, automated, and scalable way. Operators take advantage of Kubernetes extensibility to deliver the automation advantages of cloud services, like provisioning, scaling, and backup and restore, while being able to run anywhere that Kubernetes can run.

Operators make it easy to manage complex, stateful applications on top of Kubernetes. However, writing an Operator today can be difficult because of challenges such as using low-level APIs, writing boilerplate, and a lack of modularity, which leads to duplication.

The Operator SDK, a component of the Operator Framework, provides a command-line interface (CLI) tool that Operator developers can use to build, test, and deploy an Operator.

Why use the Operator SDK?

The Operator SDK simplifies this process of building Kubernetes-native applications, which can require deep, application-specific operational knowledge. The Operator SDK not only lowers that barrier, but it also helps reduce the amount of boilerplate code required for many common management capabilities, such as metering or monitoring.

The Operator SDK is a framework that uses the controller-runtime library to make writing Operators easier by providing the following features:

  • High-level APIs and abstractions to write the operational logic more intuitively
  • Tools for scaffolding and code generation to quickly bootstrap a new project
  • Integration with Operator Lifecycle Manager (OLM) to streamline packaging, installing, and running Operators on a cluster
  • Extensions to cover common Operator use cases
  • Metrics set up automatically in any generated Go-based Operator for use on clusters where the Prometheus Operator is deployed

Operator authors with cluster administrator access to a Kubernetes-based cluster (such as OpenShift Container Platform) can use the Operator SDK CLI to develop their own Operators based on Go, Ansible, or Helm. Kubebuilder is embedded into the Operator SDK as the scaffolding solution for Go-based Operators, which means existing Kubebuilder projects can be used as is with the Operator SDK and continue to work.

Note

OpenShift Container Platform 4.8 supports Operator SDK v1.8.0 or later.

5.1.1. What are Operators?

For an overview about basic Operator concepts and terminology, see Understanding Operators.

5.1.2. Development workflow

The Operator SDK provides the following workflow to develop a new Operator:

  1. Create an Operator project by using the Operator SDK command-line interface (CLI).
  2. Define new resource APIs by adding custom resource definitions (CRDs).
  3. Specify resources to watch by using the Operator SDK API.
  4. Define the Operator reconciling logic in a designated handler and use the Operator SDK API to interact with resources.
  5. Use the Operator SDK CLI to build and generate the Operator deployment manifests.

Figure 5.1. Operator SDK workflow

osdk workflow

At a high level, an Operator that uses the Operator SDK processes events for watched resources in an Operator author-defined handler and takes actions to reconcile the state of the application.

5.1.3. Additional resources

5.2. Installing the Operator SDK CLI

The Operator SDK provides a command-line interface (CLI) tool that Operator developers can use to build, test, and deploy an Operator. You can install the Operator SDK CLI on your workstation so that you are prepared to start authoring your own Operators.

Note

OpenShift Container Platform 4.8 supports Operator SDK v1.8.0.

5.2.1. Installing the Operator SDK CLI

You can install the OpenShift SDK CLI tool on Linux.

Prerequisites

  • Go v1.16+
  • docker v17.03+, podman v1.9.3+, or buildah v1.7+

Procedure

  1. Navigate to the OpenShift mirror site.
  2. From the 4.8.4 directory, download the latest version of the tarball for Linux.
  3. Unpack the archive:

    $ tar xvf operator-sdk-v1.8.0-ocp-linux-x86_64.tar.gz
  4. Make the file executable:

    $ chmod +x operator-sdk
  5. Move the extracted operator-sdk binary to a directory that is on your PATH.

    Tip

    To check your PATH:

    $ echo $PATH
    $ sudo mv ./operator-sdk /usr/local/bin/operator-sdk

Verification

  • After you install the Operator SDK CLI, verify that it is available:

    $ operator-sdk version

    Example output

    operator-sdk version: "v1.8.0-ocp", ...

5.3. Upgrading projects for newer Operator SDK versions

OpenShift Container Platform 4.8 supports Operator SDK v1.8.0. If you already have the v1.3.0 CLI installed on your workstation, you can upgrade the CLI to v1.8.0 by installing the latest version.

However, to ensure your existing Operator projects maintain compatibility with Operator SDK v1.8.0, upgrade steps are required for the associated breaking changes introduced since v1.3.0. You must perform the upgrade steps manually in any of your Operator projects that were previously created or maintained with v1.3.0.

5.3.1. Upgrading projects for Operator SDK v1.8.0

The following upgrade steps must be performed to upgrade an existing Operator project for compatibility with v1.8.0.

Prerequisites

  • Operator SDK v1.8.0 installed
  • Operator project that was previously created or maintained with Operator SDK v1.3.0

Procedure

  1. Make the following changes to your PROJECT file:

    1. Update the PROJECT file plugins object to use manifests and scorecard objects.

      The manifests and scorecard plug-ins that create Operator Lifecycle Manager (OLM) and scorecard manifests now have plug-in objects for running create subcommands to create related files.

      • For Go-based Operator projects, an existing Go-based plug-in configuration object is already present. While the old configuration is still supported, these new objects will be useful in the future as configuration options are added to their respective plug-ins:

        Old configuration

        version: 3-alpha
        ...
        plugins:
          go.sdk.operatorframework.io/v2-alpha: {}

        New configuration

        version: 3-alpha
        ...
        plugins:
          manifests.sdk.operatorframework.io/v2: {}
          scorecard.sdk.operatorframework.io/v2: {}

      • Optional: For Ansible- and Helm-based Operator projects, the plug-in configuration object previously did not exist. While you are not required to add the plug-in configuration objects, these new objects will be useful in the future as configuration options are added to their respective plug-ins:

        version: 3-alpha
        ...
        plugins:
          manifests.sdk.operatorframework.io/v2: {}
          scorecard.sdk.operatorframework.io/v2: {}
    2. The PROJECT config version 3-alpha must be upgraded to 3. The version key in your PROJECT file represents the PROJECT config version:

      Old PROJECT file

      version: 3-alpha
      resources:
      - crdVersion: v1
      ...

      Version 3-alpha has been stabilized as version 3 and contains a set of config fields sufficient to fully describe a project. While this change is not technically breaking because the spec at that version was alpha, it was used by default in operator-sdk commands, so it should be marked as breaking and have a convenient upgrade path.

      1. Run the alpha config-3alpha-to-3 command to convert most of your PROJECT file from version 3-alpha to 3:

        $ operator-sdk alpha config-3alpha-to-3

        Example output

        Your PROJECT config file has been converted from version 3-alpha to 3. Please make sure all config data is correct.

        The command will also output comments with directions where automatic conversion is not possible.

      2. Verify the change:

        New PROJECT file

        version: "3"
        resources:
        - api:
          crdVersion: v1
        ...

  2. Make the following changes to your config/manager/manager.yaml file:

    1. For Ansible- and Helm-based Operator projects, add liveness and readiness probes.

      New projects built with the Operator SDK have the probes configured by default. The endpoints /healthz and /readyz are available now in the provided image base. You can update your existing projects to use the probes by updating the Dockerfile to use the latest base image, then add the following to the manager container in the config/manager/manager.yaml file:

      Example 5.1. Configuration for Ansible-based Operator projects

        livenessProbe:
          httpGet:
            path: /healthz
            port: 6789
          initialDelaySeconds: 15
          periodSeconds: 20
        readinessProbe:
          httpGet:
            path: /readyz
            port: 6789
          initialDelaySeconds: 5
          periodSeconds: 10

      Example 5.2. Configuration for Helm-based Operator projects

        livenessProbe:
          httpGet:
            path: /healthz
            port: 8081
          initialDelaySeconds: 15
          periodSeconds: 20
        readinessProbe:
          httpGet:
            path: /readyz
            port: 8081
          initialDelaySeconds: 5
          periodSeconds: 10
    2. For Ansible- and Helm-based Operator projects, add security contexts to your manager’s deployment.

      In the config/manager/manager.yaml file, add the following security contexts:

      Example 5.3. config/manager/manager.yaml file

      spec:
        ...
        template:
          ...
          spec:
            securityContext:
              runAsNonRoot: true
            containers:
            - name: manager
              securityContext:
                allowPrivilegeEscalation: false
  3. Make the following changes to your Makefile:

    1. For Ansible- and Helm-based Operator projects, update the helm-operator and ansible-operator URLs in the Makefile:

      • For Ansible-based Operator projects, change:

        https://github.com/operator-framework/operator-sdk/releases/download/v1.3.0/ansible-operator-v1.3.0-$(ARCHOPER)-$(OSOPER)

        to:

        https://github.com/operator-framework/operator-sdk/releases/download/v1.8.0/ansible-operator_$(OS)_$(ARCH)
      • For Helm-based Operator projects, change:

        https://github.com/operator-framework/operator-sdk/releases/download/v1.3.0/helm-operator-v1.3.0-$(ARCHOPER)-$(OSOPER)

        to:

        https://github.com/operator-framework/operator-sdk/releases/download/v1.8.0/helm-operator_$(OS)_$(ARCH)
    2. For Ansible- and Helm-based Operator projects, update the helm-operator, ansible-operator, and kustomize rules in the Makefile. These rules download a local binary but do not use it if a global binary is present:

      Example 5.4. Makefile diff for Ansible-based Operator projects

       PATH  := $(PATH):$(PWD)/bin
       SHELL := env PATH=$(PATH) /bin/sh
      -OS := $(shell uname -s | tr '[:upper:]' '[:lower:]')
      -ARCH := $(shell uname -m | sed 's/x86_64/amd64/')
      +OS    = $(shell uname -s | tr '[:upper:]' '[:lower:]')
      +ARCH  = $(shell uname -m | sed 's/x86_64/amd64/')
      +OSOPER   = $(shell uname -s | tr '[:upper:]' '[:lower:]' | sed 's/darwin/apple-darwin/' | sed 's/linux/linux-gnu/')
      +ARCHOPER = $(shell uname -m )
      
      -# Download kustomize locally if necessary, preferring the $(pwd)/bin path over global if both exist.
      -.PHONY: kustomize
      -KUSTOMIZE = $(shell pwd)/bin/kustomize
       kustomize:
      -ifeq (,$(wildcard $(KUSTOMIZE)))
      -ifeq (,$(shell which kustomize 2>/dev/null))
      +ifeq (, $(shell which kustomize 2>/dev/null))
       	@{ \
       	set -e ;\
      -	mkdir -p $(dir $(KUSTOMIZE)) ;\
      -	curl -sSLo - https://github.com/kubernetes-sigs/kustomize/releases/download/kustomize/v3.5.4/kustomize_v3.5.4_$(OS)_$(ARCH).tar.gz | \
      -	tar xzf - -C bin/ ;\
      +	mkdir -p bin ;\
      +	curl -sSLo - https://github.com/kubernetes-sigs/kustomize/releases/download/kustomize/v3.5.4/kustomize_v3.5.4_$(OS)_$(ARCH).tar.gz | tar xzf - -C bin/ ;\
       	}
      +KUSTOMIZE=$(realpath ./bin/kustomize)
       else
      -KUSTOMIZE = $(shell which kustomize)
      -endif
      +KUSTOMIZE=$(shell which kustomize)
       endif
      
      -# Download ansible-operator locally if necessary, preferring the $(pwd)/bin path over global if both exist.
      -.PHONY: ansible-operator
      -ANSIBLE_OPERATOR = $(shell pwd)/bin/ansible-operator
       ansible-operator:
      -ifeq (,$(wildcard $(ANSIBLE_OPERATOR)))
      -ifeq (,$(shell which ansible-operator 2>/dev/null))
      +ifeq (, $(shell which ansible-operator 2>/dev/null))
       	@{ \
       	set -e ;\
      -	mkdir -p $(dir $(ANSIBLE_OPERATOR)) ;\
      -	curl -sSLo $(ANSIBLE_OPERATOR) https://github.com/operator-framework/operator-sdk/releases/download/v1.3.0/ansible-operator_$(OS)_$(ARCH) ;\
      -	chmod +x $(ANSIBLE_OPERATOR) ;\
      +	mkdir -p bin ;\
      +	curl -LO https://github.com/operator-framework/operator-sdk/releases/download/v1.8.0/ansible-operator-v1.8.0-$(ARCHOPER)-$(OSOPER) ;\
      +	mv ansible-operator-v1.8.0-$(ARCHOPER)-$(OSOPER) ./bin/ansible-operator ;\
      +	chmod +x ./bin/ansible-operator ;\
       	}
      +ANSIBLE_OPERATOR=$(realpath ./bin/ansible-operator)
       else
      -ANSIBLE_OPERATOR = $(shell which ansible-operator)
      -endif
      +ANSIBLE_OPERATOR=$(shell which ansible-operator)
       endif

      Example 5.5. Makefile diff for Helm-based Operator projects

       PATH  := $(PATH):$(PWD)/bin
       SHELL := env PATH=$(PATH) /bin/sh
      -OS := $(shell uname -s | tr '[:upper:]' '[:lower:]')
      -ARCH := $(shell uname -m | sed 's/x86_64/amd64/')
      +OS    = $(shell uname -s | tr '[:upper:]' '[:lower:]')
      +ARCH  = $(shell uname -m | sed 's/x86_64/amd64/')
      +OSOPER   = $(shell uname -s | tr '[:upper:]' '[:lower:]' | sed 's/darwin/apple-darwin/' | sed 's/linux/linux-gnu/')
      +ARCHOPER = $(shell uname -m )
      
      -# Download kustomize locally if necessary, preferring the $(pwd)/bin path over global if both exist.
      -.PHONY: kustomize
      -KUSTOMIZE = $(shell pwd)/bin/kustomize
       kustomize:
      -ifeq (,$(wildcard $(KUSTOMIZE)))
      -ifeq (,$(shell which kustomize 2>/dev/null))
      +ifeq (, $(shell which kustomize 2>/dev/null))
       	@{ \
       	set -e ;\
      -	mkdir -p $(dir $(KUSTOMIZE)) ;\
      -	curl -sSLo - https://github.com/kubernetes-sigs/kustomize/releases/download/kustomize/v3.5.4/kustomize_v3.5.4_$(OS)_$(ARCH).tar.gz | \
      -	tar xzf - -C bin/ ;\
      +	mkdir -p bin ;\
      +	curl -sSLo - https://github.com/kubernetes-sigs/kustomize/releases/download/kustomize/v3.5.4/kustomize_v3.5.4_$(OS)_$(ARCH).tar.gz | tar xzf - -C bin/ ;\
       	}
      +KUSTOMIZE=$(realpath ./bin/kustomize)
       else
      -KUSTOMIZE = $(shell which kustomize)
      -endif
      +KUSTOMIZE=$(shell which kustomize)
       endif
      
      -# Download helm-operator locally if necessary, preferring the $(pwd)/bin path over global if both exist.
      -.PHONY: helm-operator
      -HELM_OPERATOR = $(shell pwd)/bin/helm-operator
       helm-operator:
      -ifeq (,$(wildcard $(HELM_OPERATOR)))
      -ifeq (,$(shell which helm-operator 2>/dev/null))
      +ifeq (, $(shell which helm-operator 2>/dev/null))
       	@{ \
       	set -e ;\
      -	mkdir -p $(dir $(HELM_OPERATOR)) ;\
      -	curl -sSLo $(HELM_OPERATOR) https://github.com/operator-framework/operator-sdk/releases/download/v1.3.0/helm-operator_$(OS)_$(ARCH) ;\
      -	chmod +x $(HELM_OPERATOR) ;\
      +	mkdir -p bin ;\
      +	curl -LO https://github.com/operator-framework/operator-sdk/releases/download/v1.8.0/helm-operator-v1.8.0-$(ARCHOPER)-$(OSOPER) ;\
      +	mv helm-operator-v1.8.0-$(ARCHOPER)-$(OSOPER) ./bin/helm-operator ;\
      +	chmod +x ./bin/helm-operator ;\
       	}
      +HELM_OPERATOR=$(realpath ./bin/helm-operator)
       else
      -HELM_OPERATOR = $(shell which helm-operator)
      -endif
      +HELM_OPERATOR=$(shell which helm-operator)
       endif
    3. Move the positional directory argument . in the make target for docker-build.

      The directory argument . in the docker-build target was moved to the last positional argument to align with podman CLI expectations, which makes substitution cleaner:

      Old target

      docker-build:
        docker build . -t ${IMG}

      New target

      docker-build:
        docker build -t ${IMG} .

      You can make this change by running the following command:

      $ sed -i 's/docker build . -t ${IMG}/docker build -t ${IMG} ./' $(git grep -l 'docker.*build \. ')
    4. For Ansible- and Helm-based Operator projects, add a help target to the Makefile.

      Ansible- and Helm-based projects now provide help target in the Makefile by default, similar to a --help flag. You can manually add this target to your Makefile using the following lines:

      Example 5.6. help target

      ##@ General
      
      # The help target prints out all targets with their descriptions organized
      # beneath their categories. The categories are represented by '##@' and the
      # target descriptions by '##'. The awk commands is responsible for reading the
      # entire set of makefiles included in this invocation, looking for lines of the
      # file as xyz: ## something, and then pretty-format the target and help. Then,
      # if there's a line with ##@ something, that gets pretty-printed as a category.
      # More info on the usage of ANSI control characters for terminal formatting:
      # https://en.wikipedia.org/wiki/ANSI_escape_code#SGR_parameters
      # More info on the awk command:
      # http://linuxcommand.org/lc3_adv_awk.php
      
      help: ## Display this help.
      	@awk 'BEGIN {FS = ":.*##"; printf "\nUsage:\n  make \033[36m<target>\033[0m\n"} /^[a-zA-Z_0-9-]+:.*?##/ { printf "  \033[36m%-15s\033[0m %s\n", $$1, $$2 } /^##@/ { printf "\n\033[1m%s\033[0m\n", substr($$0, 5) } ' $(MAKEFILE_LIST)
    5. Add opm and catalog-build targets. You can use these targets to create your own catalogs for your Operator or add your Operator bundles to an existing catalog:

      1. Add the targets to your Makefile by adding the following lines:

        Example 5.7. opm and catalog-build targets

        .PHONY: opm
        OPM = ./bin/opm
        opm:
        ifeq (,$(wildcard $(OPM)))
        ifeq (,$(shell which opm 2>/dev/null))
        	@{ \
        	set -e ;\
        	mkdir -p $(dir $(OPM)) ;\
        	curl -sSLo $(OPM) https://github.com/operator-framework/operator-registry/releases/download/v1.15.1/$(OS)-$(ARCH)-opm ;\
        	chmod +x $(OPM) ;\
        	}
        else
        OPM = $(shell which opm)
        endif
        endif
        BUNDLE_IMGS ?= $(BUNDLE_IMG)
        CATALOG_IMG ?= $(IMAGE_TAG_BASE)-catalog:v$(VERSION) ifneq ($(origin CATALOG_BASE_IMG), undefined) FROM_INDEX_OPT := --from-index $(CATALOG_BASE_IMG) endif
        .PHONY: catalog-build
        catalog-build: opm
        	$(OPM) index add --container-tool docker --mode semver --tag $(CATALOG_IMG) --bundles $(BUNDLE_IMGS) $(FROM_INDEX_OPT)
        
        .PHONY: catalog-push
        catalog-push: ## Push the catalog image.
        	$(MAKE) docker-push IMG=$(CATALOG_IMG)
      2. If you are updating a Go-based Operator project, also add the following Makefile variables:

        Example 5.8. Makefile variables

        OS = $(shell go env GOOS)
        ARCH = $(shell go env GOARCH)
    6. For Go-based Operator projects, set the SHELL variable in your Makefile to the system bash binary.

      Importing the setup-envtest.sh script requires bash, so the SHELL variable must be set to bash with error options:

      Example 5.9. Makefile diff

      else GOBIN=$(shell go env GOBIN)
      endif
      +# Setting SHELL to bash allows bash commands to be executed by recipes.
      +# This is a requirement for 'setup-envtest.sh' in the test target.
      +# Options are set to exit when a recipe line exits non-zero or a piped command fails.
      +SHELL = /usr/bin/env bash -o pipefail
      +.SHELLFLAGS = -ec
      + all: build
  4. For Go-based Operator projects, upgrade controller-runtime to v0.8.3 and Kubernetes dependencies to v0.20.2 by changing the following entries in your go.mod file, then rebuild your project:

    Example 5.10. go.mod file

    ...
    	k8s.io/api v0.20.2
    	k8s.io/apimachinery v0.20.2
    	k8s.io/client-go v0.20.2
    	sigs.k8s.io/controller-runtime v0.8.3
  5. Add a system:controller-manager service account to your project. A non-default service account controller-manager is now generated by the operator-sdk init command to improve security for Operators installed in shared namespaces. To add this service account to your existing project, follow these steps:

    1. Create the ServiceAccount definition in a file:

      Example 5.11. config/rbac/service_account.yaml file

      apiVersion: v1
      kind: ServiceAccount
      metadata:
        name: controller-manager
        namespace: system
    2. Add the service account to the list of RBAC resources:

      $ echo "- service_account.yaml" >> config/rbac/kustomization.yaml
    3. Update all RoleBinding and ClusterRoleBinding objects that reference the Operator’s service account:

      $ find config/rbac -name *_binding.yaml -exec sed -i -E 's/  name: default/  name: controller-manager/g' {} \;
    4. Add the service account name to the manager deployment’s spec.template.spec.serviceAccountName field:

      $ sed -i -E 's/([ ]+)(terminationGracePeriodSeconds:)/\1serviceAccountName: controller-manager\n\1\2/g' config/manager/manager.yaml
    5. Verify the changes look like the following diffs:

      Example 5.12. config/manager/manager.yaml file diff

      ...
                 requests:
                   cpu: 100m
                   memory: 20Mi
      +      serviceAccountName: controller-manager
             terminationGracePeriodSeconds: 10

      Example 5.13. config/rbac/auth_proxy_role_binding.yaml file diff

      ...
         name: proxy-role
       subjects:
       - kind: ServiceAccount
      -  name: default
      +  name: controller-manager
         namespace: system

      Example 5.14. config/rbac/kustomization.yaml file diff

       resources:
      +- service_account.yaml
       - role.yaml
       - role_binding.yaml
       - leader_election_role.yaml

      Example 5.15. config/rbac/leader_election_role_binding.yaml file diff

      ...
         name: leader-election-role
       subjects:
       - kind: ServiceAccount
      -  name: default
      +  name: controller-manager
         namespace: system

      Example 5.16. config/rbac/role_binding.yaml file diff

      ...
         name: manager-role
       subjects:
       - kind: ServiceAccount
      -  name: default
      +  name: controller-manager
         namespace: system

      Example 5.17. config/rbac/service_account.yaml file diff

      +apiVersion: v1
      +kind: ServiceAccount
      +metadata:
      +  name: controller-manager
      +  namespace: system
  6. Make the following changes to your config/manifests/kustomization.yaml file:

    1. Add a Kustomize patch to remove the cert-manager volume and volumeMount objects from your cluster service version (CSV).

      Because Operator Lifecycle Manager (OLM) does not yet support cert-manager, a JSON patch was added to remove this volume and mount so OLM can create and manage certificates for your Operator.

      In the config/manifests/kustomization.yaml file, add the following lines:

      Example 5.18. config/manifests/kustomization.yaml file

      patchesJson6902:
      - target:
          group: apps
          version: v1
          kind: Deployment
          name: controller-manager
          namespace: system
        patch: |-
          # Remove the manager container's "cert" volumeMount, since OLM will create and mount a set of certs.
          # Update the indices in this path if adding or removing containers/volumeMounts in the manager's Deployment.
          - op: remove
            path: /spec/template/spec/containers/1/volumeMounts/0
          # Remove the "cert" volume, since OLM will create and mount a set of certs.
          # Update the indices in this path if adding or removing volumes in the manager's Deployment.
          - op: remove
            path: /spec/template/spec/volumes/0
    2. Optional: For Ansible- and Helm-based Operator projects, configure ansible-operator and helm-operator with a component config. To add this option, follow these steps:

      1. Create the following file:

        Example 5.19. config/default/manager_config_patch.yaml file

        apiVersion: apps/v1
        kind: Deployment
        metadata:
          name: controller-manager
          namespace: system
        spec:
          template:
            spec:
              containers:
              - name: manager
                args:
                - "--config=controller_manager_config.yaml"
                volumeMounts:
                - name: manager-config
                  mountPath: /controller_manager_config.yaml
                  subPath: controller_manager_config.yaml
              volumes:
              - name: manager-config
                configMap:
                  name: manager-config
      2. Create the following file:

        Example 5.20. config/manager/controller_manager_config.yaml file

        apiVersion: controller-runtime.sigs.k8s.io/v1alpha1
        kind: ControllerManagerConfig
        health:
          healthProbeBindAddress: :6789
        metrics:
          bindAddress: 127.0.0.1:8080
        
        leaderElection:
          leaderElect: true
          resourceName: <resource_name>
      3. Update the config/default/kustomization.yaml file by applying the following changes to resources:

        Example 5.21. config/default/kustomization.yaml file

          resources:
          ...
          - manager_config_patch.yaml
      4. Update the config/manager/kustomization.yaml file by applying the following changes:

        Example 5.22. config/manager/kustomization.yaml file

          generatorOptions:
            disableNameSuffixHash: true
        
          configMapGenerator:
          - files:
            - controller_manager_config.yaml
            name: manager-config
          apiVersion: kustomize.config.k8s.io/v1beta1
          kind: Kustomization
          images:
          - name: controller
            newName: quay.io/example/memcached-operator
            newTag: v0.0.1
    3. Optional: Add a manager config patch to the config/default/kustomization.yaml file.

      The generated --config flag was not added to either the ansible-operator or helm-operator binary when config file support was originally added, so it does not currently work. The --config flag supports configuration of both binaries by file; this method of configuration only applies to the underlying controller manager and not the Operator as a whole.

      To optionally configure the Operator’s deployment with a config file, make changes to the config/default/kustomization.yaml file as shown in the following diff:

      Example 5.23. config/default/kustomization.yaml file diff

      # If you want your controller-manager to expose the /metrics # endpoint w/o any authn/z, please comment the following line.
      \- manager_auth_proxy_patch.yaml
      +# Mount the controller config file for loading manager configurations
      +# through a ComponentConfig type
      +- manager_config_patch.yaml

      Flags can be used as is or to override config file values.

  7. For Ansible- and Helm-based Operator projects, add role rules for leader election by making the following changes to the config/rbac/leader_election_role.yaml file:

    Example 5.24. config/rbac/leader_election_role.yaml file

    - apiGroups:
      - coordination.k8s.io
      resources:
      - leases
      verbs:
      - get
      - list
      - watch
      - create
      - update
      - patch
      - delete
  8. For Ansible-based Operator projects, update Ansible collections.

    In your requirements.yml file, change the version field for community.kubernetes to 1.2.1, and the version field for operator_sdk.util to 0.2.0.

  9. Make the following changes to your config/default/manager_auth_proxy_patch.yaml file:

    • For Ansible-based Operator projects, add the --health-probe-bind-address=:6789 argument to the config/default/manager_auth_proxy_patch.yaml file:

      Example 5.25. config/default/manager_auth_proxy_patch.yaml file

      spec:
        template:
          spec:
            containers:
            - name: manager
              args:
              - "--health-probe-bind-address=:6789"
              ...
    • For Helm-based Operator projects:

      1. Add the --health-probe-bind-address=:8081 argument to the config/default/manager_auth_proxy_patch.yaml file:

        Example 5.26. config/default/manager_auth_proxy_patch.yaml file

        spec:
          template:
            spec:
              containers:
              - name: manager
                args:
                - "--health-probe-bind-address=:8081"
                ...
      2. Replace the deprecated flag --enable-leader-election with --leader-elect, and the deprecated flag --metrics-addr with --metrics-bind-address.
  10. Make the following changes to your config/prometheus/monitor.yaml file:

    1. Add scheme, token, and TLS config to the Prometheus ServiceMonitor metrics endpoint.

      The /metrics endpoint, while specifying the https port on the manager pod, was not actually configured to serve over HTTPS because no tlsConfig was set. Because kube-rbac-proxy secures this endpoint as a manager sidecar, using the service account token mounted into the pod by default corrects this problem.

      Apply the changes to the config/prometheus/monitor.yaml file as shown in the following diff:

      Example 5.27. config/prometheus/monitor.yaml file diff

      spec:
         endpoints:
           - path: /metrics
             port: https
      +      scheme: https
      +      bearerTokenFile: /var/run/secrets/kubernetes.io/serviceaccount/token
      +      tlsConfig:
      +        insecureSkipVerify: true
         selector:
           matchLabels:
             control-plane: controller-manager
      Note

      If you removed kube-rbac-proxy from your project, ensure that you secure the /metrics endpoint using a proper TLS configuration.

  11. Ensure that existing dependent resources have owner annotations.

    For Ansible-based Operator projects, owner reference annotations on cluster-scoped dependent resources and dependent resources in other namespaces were not applied correctly. A workaround was to add these annotations manually, which is no longer required as this bug has been fixed.

  12. Deprecate support for package manifests.

    The Operator Framework is removing support for the Operator package manifest format in a future release. As part of the ongoing deprecation process, the operator-sdk generate packagemanifests and operator-sdk run packagemanifests commands are now deprecated. To migrate package manifests to bundles, the operator-sdk pkgman-to-bundle command can be used.

    Run the operator-sdk pkgman-to-bundle --help command and see "Migrating package manifest projects to bundle format" for more details.

  13. Update the finalizer names for your Operator.

    The finalizer name format suggested by Kubernetes documentation is:

    <qualified_group>/<finalizer_name>

    while the format previously documented for Operator SDK was:

    <finalizer_name>.<qualified_group>

    If your Operator uses any finalizers with names that match the incorrect format, change them to match the official format. For example, finalizer.cache.example.com must be changed to cache.example.com/finalizer.

Your Operator project is now compatible with Operator SDK v1.8.0.

5.3.2. Additional resources

5.4. Go-based Operators

5.4.1. Getting started with Operator SDK for Go-based Operators

To demonstrate the basics of setting up and running a Go-based Operator using tools and libraries provided by the Operator SDK, Operator developers can build an example Go-based Operator for Memcached, a distributed key-value store, and deploy it to a cluster.

5.4.1.1. Prerequisites

  • Operator SDK CLI installed
  • OpenShift CLI (oc) v4.8+ installed
  • Logged into an OpenShift Container Platform 4.8 cluster with oc with an account that has cluster-admin permissions
  • To allow the cluster pull the image, the repository where you push your image must be set as public, or you must configure an image pull secret

5.4.1.2. Creating and deploying Go-based Operators

You can build and deploy a simple Go-based Operator for Memcached by using the Operator SDK.

Procedure

  1. Create a project.

    1. Create your project directory:

      $ mkdir memcached-operator
    2. Change into the project directory:

      $ cd memcached-operator
    3. Run the operator-sdk init command to initialize the project:

      $ operator-sdk init \
          --domain=example.com \
          --repo=github.com/example-inc/memcached-operator

      The command uses the Go plugin by default.

  2. Create an API.

    Create a simple Memcached API:

    $ operator-sdk create api \
        --resource=true \
        --controller=true \
        --group cache \
        --version v1 \
        --kind Memcached
  3. Build and push the Operator image.

    Use the default Makefile targets to build and push your Operator. Set IMG with a pull spec for your image that uses a registry you can push to:

    $ make docker-build docker-push IMG=<registry>/<user>/<image_name>:<tag>
  4. Run the Operator.

    1. Install the CRD:

      $ make install
    2. Deploy the project to the cluster. Set IMG to the image that you pushed:

      $ make deploy IMG=<registry>/<user>/<image_name>:<tag>
  5. Create a sample custom resource (CR).

    1. Create a sample CR:

      $ oc apply -f config/samples/cache_v1_memcached.yaml \
          -n memcached-operator-system
    2. Watch for the CR to reconcile the Operator:

      $ oc logs deployment.apps/memcached-operator-controller-manager \
          -c manager \
          -n memcached-operator-system
  6. Clean up.

    Run the following command to clean up the resources that have been created as part of this procedure:

    $ make undeploy

5.4.1.3. Next steps

5.4.2. Operator SDK tutorial for Go-based Operators

Operator developers can take advantage of Go programming language support in the Operator SDK to build an example Go-based Operator for Memcached, a distributed key-value store, and manage its lifecycle.

This process is accomplished using two centerpieces of the Operator Framework:

Operator SDK
The operator-sdk CLI tool and controller-runtime library API
Operator Lifecycle Manager (OLM)
Installation, upgrade, and role-based access control (RBAC) of Operators on a cluster
Note

This tutorial goes into greater detail than Getting started with Operator SDK for Go-based Operators.

5.4.2.1. Prerequisites

  • Operator SDK CLI installed
  • OpenShift CLI (oc) v4.8+ installed
  • Logged into an OpenShift Container Platform 4.8 cluster with oc with an account that has cluster-admin permissions
  • To allow the cluster pull the image, the repository where you push your image must be set as public, or you must configure an image pull secret

5.4.2.2. Creating a project

Use the Operator SDK CLI to create a project called memcached-operator.

Procedure

  1. Create a directory for the project:

    $ mkdir -p $HOME/projects/memcached-operator
  2. Change to the directory:

    $ cd $HOME/projects/memcached-operator
  3. Activate support for Go modules:

    $ export GO111MODULE=on
  4. Run the operator-sdk init command to initialize the project:

    $ operator-sdk init \
        --domain=example.com \
        --repo=github.com/example-inc/memcached-operator
    Note

    The operator-sdk init command uses the Go plugin by default.

    The operator-sdk init command generates a go.mod file to be used with Go modules. The --repo flag is required when creating a project outside of $GOPATH/src/, because generated files require a valid module path.

5.4.2.2.1. PROJECT file

Among the files generated by the operator-sdk init command is a Kubebuilder PROJECT file. Subsequent operator-sdk commands, as well as help output, that are run from the project root read this file and are aware that the project type is Go. For example:

domain: example.com
layout: go.kubebuilder.io/v3
projectName: memcached-operator
repo: github.com/example-inc/memcached-operator
version: 3
plugins:
  manifests.sdk.operatorframework.io/v2: {}
  scorecard.sdk.operatorframework.io/v2: {}
5.4.2.2.2. About the Manager

The main program for the Operator is the main.go file, which initializes and runs the Manager. The Manager automatically registers the Scheme for all custom resource (CR) API definitions and sets up and runs controllers and webhooks.

The Manager can restrict the namespace that all controllers watch for resources:

mgr, err := ctrl.NewManager(cfg, manager.Options{Namespace: namespace})

By default, the Manager watches the namespace where the Operator runs. To watch all namespaces, you can leave the namespace option empty:

mgr, err := ctrl.NewManager(cfg, manager.Options{Namespace: ""})

You can also use the MultiNamespacedCacheBuilder function to watch a specific set of namespaces:

var namespaces []string 1
mgr, err := ctrl.NewManager(cfg, manager.Options{ 2
   NewCache: cache.MultiNamespacedCacheBuilder(namespaces),
})
1
List of namespaces.
2
Creates a Cmd struct to provide shared dependencies and start components.
5.4.2.2.3. About multi-group APIs

Before you create an API and controller, consider whether your Operator requires multiple API groups. This tutorial covers the default case of a single group API, but to change the layout of your project to support multi-group APIs, you can run the following command:

$ operator-sdk edit --multigroup=true

This command updates the PROJECT file, which should look like the following example:

domain: example.com
layout: go.kubebuilder.io/v3
multigroup: true
...

For multi-group projects, the API Go type files are created in the apis/<group>/<version>/ directory, and the controllers are created in the controllers/<group>/ directory. The Dockerfile is then updated accordingly.

Additional resource

5.4.2.3. Creating an API and controller

Use the Operator SDK CLI to create a custom resource definition (CRD) API and controller.

Procedure

  1. Run the following command to create an API with group cache, version, v1, and kind Memcached:

    $ operator-sdk create api \
        --group=cache \
        --version=v1 \
        --kind=Memcached
  2. When prompted, enter y for creating both the resource and controller:

    Create Resource [y/n]
    y
    Create Controller [y/n]
    y

    Example output

    Writing scaffold for you to edit...
    api/v1/memcached_types.go
    controllers/memcached_controller.go
    ...

This process generates the Memcached resource API at api/v1/memcached_types.go and the controller at controllers/memcached_controller.go.

5.4.2.3.1. Defining the API

Define the API for the Memcached custom resource (CR).

Procedure

  1. Modify the Go type definitions at api/v1/memcached_types.go to have the following spec and status:

    // MemcachedSpec defines the desired state of Memcached
    type MemcachedSpec struct {
    	// +kubebuilder:validation:Minimum=0
    	// Size is the size of the memcached deployment
    	Size int32 `json:"size"`
    }
    
    // MemcachedStatus defines the observed state of Memcached
    type MemcachedStatus struct {
    	// Nodes are the names of the memcached pods
    	Nodes []string `json:"nodes"`
    }
  2. Update the generated code for the resource type:

    $ make generate
    Tip

    After you modify a *_types.go file, you must run the make generate command to update the generated code for that resource type.

    The above Makefile target invokes the controller-gen utility to update the api/v1/zz_generated.deepcopy.go file. This ensures your API Go type definitions implement the runtime.Object interface that all Kind types must implement.

5.4.2.3.2. Generating CRD manifests

After the API is defined with spec and status fields and custom resource definition (CRD) validation markers, you can generate CRD manifests.

Procedure

  • Run the following command to generate and update CRD manifests:

    $ make manifests

    This Makefile target invokes the controller-gen utility to generate the CRD manifests in the config/crd/bases/cache.example.com_memcacheds.yaml file.

5.4.2.3.2.1. About OpenAPI validation

OpenAPIv3 schemas are added to CRD manifests in the spec.validation block when the manifests are generated. This validation block allows Kubernetes to validate the properties in a Memcached custom resource (CR) when it is created or updated.

Markers, or annotations, are available to configure validations for your API. These markers always have a +kubebuilder:validation prefix.

Additional resources

5.4.2.4. Implementing the controller

After creating a new API and controller, you can implement the controller logic.

Procedure

  • For this example, replace the generated controller file controllers/memcached_controller.go with following example implementation:

    Example 5.28. Example memcached_controller.go

    /*
    Copyright 2020.
    
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    
        http://www.apache.org/licenses/LICENSE-2.0
    
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    */
    
    package controllers
    
    import (
    	appsv1 "k8s.io/api/apps/v1"
    	corev1 "k8s.io/api/core/v1"
    	"k8s.io/apimachinery/pkg/api/errors"
    	metav1 "k8s.io/apimachinery/pkg/apis/meta/v1"
    	"k8s.io/apimachinery/pkg/types"
    	"reflect"
    
    	"context"
    
    	"github.com/go-logr/logr"
    	"k8s.io/apimachinery/pkg/runtime"
    	ctrl "sigs.k8s.io/controller-runtime"
    	"sigs.k8s.io/controller-runtime/pkg/client"
    
    	cachev1alpha1 "github.com/example/memcached-operator/api/v1alpha1"
    )
    
    // MemcachedReconciler reconciles a Memcached object
    type MemcachedReconciler struct {
    	client.Client
    	Log    logr.Logger
    	Scheme *runtime.Scheme
    }
    
    // +kubebuilder:rbac:groups=cache.example.com,resources=memcacheds,verbs=get;list;watch;create;update;patch;delete
    // +kubebuilder:rbac:groups=cache.example.com,resources=memcacheds/status,verbs=get;update;patch
    // +kubebuilder:rbac:groups=cache.example.com,resources=memcacheds/finalizers,verbs=update
    // +kubebuilder:rbac:groups=apps,resources=deployments,verbs=get;list;watch;create;update;patch;delete
    // +kubebuilder:rbac:groups=core,resources=pods,verbs=get;list;
    
    // Reconcile is part of the main kubernetes reconciliation loop which aims to
    // move the current state of the cluster closer to the desired state.
    // TODO(user): Modify the Reconcile function to compare the state specified by
    // the Memcached object against the actual cluster state, and then
    // perform operations to make the cluster state reflect the state specified by
    // the user.
    //
    // For more details, check Reconcile and its Result here:
    // - https://pkg.go.dev/sigs.k8s.io/controller-runtime@v0.7.0/pkg/reconcile
    func (r *MemcachedReconciler) Reconcile(ctx context.Context, req ctrl.Request) (ctrl.Result, error) {
    	log := r.Log.WithValues("memcached", req.NamespacedName)
    
    	// Fetch the Memcached instance
    	memcached := &cachev1alpha1.Memcached{}
    	err := r.Get(ctx, req.NamespacedName, memcached)
    	if err != nil {
    		if errors.IsNotFound(err) {
    			// Request object not found, could have been deleted after reconcile request.
    			// Owned objects are automatically garbage collected. For additional cleanup logic use finalizers.
    			// Return and don't requeue
    			log.Info("Memcached resource not found. Ignoring since object must be deleted")
    			return ctrl.Result{}, nil
    		}
    		// Error reading the object - requeue the request.
    		log.Error(err, "Failed to get Memcached")
    		return ctrl.Result{}, err
    	}
    
    	// Check if the deployment already exists, if not create a new one
    	found := &appsv1.Deployment{}
    	err = r.Get(ctx, types.NamespacedName{Name: memcached.Name, Namespace: memcached.Namespace}, found)
    	if err != nil && errors.IsNotFound(err) {
    		// Define a new deployment
    		dep := r.deploymentForMemcached(memcached)
    		log.Info("Creating a new Deployment", "Deployment.Namespace", dep.Namespace, "Deployment.Name", dep.Name)
    		err = r.Create(ctx, dep)
    		if err != nil {
    			log.Error(err, "Failed to create new Deployment", "Deployment.Namespace", dep.Namespace, "Deployment.Name", dep.Name)
    			return ctrl.Result{}, err
    		}
    		// Deployment created successfully - return and requeue
    		return ctrl.Result{Requeue: true}, nil
    	} else if err != nil {
    		log.Error(err, "Failed to get Deployment")
    		return ctrl.Result{}, err
    	}
    
    	// Ensure the deployment size is the same as the spec
    	size := memcached.Spec.Size
    	if *found.Spec.Replicas != size {
    		found.Spec.Replicas = &size
    		err = r.Update(ctx, found)
    		if err != nil {
    			log.Error(err, "Failed to update Deployment", "Deployment.Namespace", found.Namespace, "Deployment.Name", found.Name)
    			return ctrl.Result{}, err
    		}
    		// Spec updated - return and requeue
    		return ctrl.Result{Requeue: true}, nil
    	}
    
    	// Update the Memcached status with the pod names
    	// List the pods for this memcached's deployment
    	podList := &corev1.PodList{}
    	listOpts := []client.ListOption{
    		client.InNamespace(memcached.Namespace),
    		client.MatchingLabels(labelsForMemcached(memcached.Name)),
    	}
    	if err = r.List(ctx, podList, listOpts...); err != nil {
    		log.Error(err, "Failed to list pods", "Memcached.Namespace", memcached.Namespace, "Memcached.Name", memcached.Name)
    		return ctrl.Result{}, err
    	}
    	podNames := getPodNames(podList.Items)
    
    	// Update status.Nodes if needed
    	if !reflect.DeepEqual(podNames, memcached.Status.Nodes) {
    		memcached.Status.Nodes = podNames
    		err := r.Status().Update(ctx, memcached)
    		if err != nil {
    			log.Error(err, "Failed to update Memcached status")
    			return ctrl.Result{}, err
    		}
    	}
    
    	return ctrl.Result{}, nil
    }
    
    // deploymentForMemcached returns a memcached Deployment object
    func (r *MemcachedReconciler) deploymentForMemcached(m *cachev1alpha1.Memcached) *appsv1.Deployment {
    	ls := labelsForMemcached(m.Name)
    	replicas := m.Spec.Size
    
    	dep := &appsv1.Deployment{
    		ObjectMeta: metav1.ObjectMeta{
    			Name:      m.Name,
    			Namespace: m.Namespace,
    		},
    		Spec: appsv1.DeploymentSpec{
    			Replicas: &replicas,
    			Selector: &metav1.LabelSelector{
    				MatchLabels: ls,
    			},
    			Template: corev1.PodTemplateSpec{
    				ObjectMeta: metav1.ObjectMeta{
    					Labels: ls,
    				},
    				Spec: corev1.PodSpec{
    					Containers: []corev1.Container{{
    						Image:   "memcached:1.4.36-alpine",
    						Name:    "memcached",
    						Command: []string{"memcached", "-m=64", "-o", "modern", "-v"},
    						Ports: []corev1.ContainerPort{{
    							ContainerPort: 11211,
    							Name:          "memcached",
    						}},
    					}},
    				},
    			},
    		},
    	}
    	// Set Memcached instance as the owner and controller
    	ctrl.SetControllerReference(m, dep, r.Scheme)
    	return dep
    }
    
    // labelsForMemcached returns the labels for selecting the resources
    // belonging to the given memcached CR name.
    func labelsForMemcached(name string) map[string]string {
    	return map[string]string{"app": "memcached", "memcached_cr": name}
    }
    
    // getPodNames returns the pod names of the array of pods passed in
    func getPodNames(pods []corev1.Pod) []string {
    	var podNames []string
    	for _, pod := range pods {
    		podNames = append(podNames, pod.Name)
    	}
    	return podNames
    }
    
    // SetupWithManager sets up the controller with the Manager.
    func (r *MemcachedReconciler) SetupWithManager(mgr ctrl.Manager) error {
    	return ctrl.NewControllerManagedBy(mgr).
    		For(&cachev1alpha1.Memcached{}).
    		Owns(&appsv1.Deployment{}).
    		Complete(r)
    }

    The example controller runs the following reconciliation logic for each Memcached custom resource (CR):

    • Create a Memcached deployment if it does not exist.
    • Ensure that the deployment size is the same as specified by the Memcached CR spec.
    • Update the Memcached CR status with the names of the memcached pods.

The next subsections explain how the controller in the example implementation watches resources and how the reconcile loop is triggered. You can skip these subsections to go directly to Running the Operator.

5.4.2.4.1. Resources watched by the controller

The SetupWithManager() function in controllers/memcached_controller.go specifies how the controller is built to watch a CR and other resources that are owned and managed by that controller.

import (
	...
	appsv1 "k8s.io/api/apps/v1"
	...
)

func (r *MemcachedReconciler) SetupWithManager(mgr ctrl.Manager) error {
	return ctrl.NewControllerManagedBy(mgr).
		For(&cachev1.Memcached{}).
		Owns(&appsv1.Deployment{}).
		Complete(r)
}

NewControllerManagedBy() provides a controller builder that allows various controller configurations.

For(&cachev1.Memcached{}) specifies the Memcached type as the primary resource to watch. For each Add, Update, or Delete event for a Memcached type, the reconcile loop is sent a reconcile Request argument, which consists of a namespace and name key, for that Memcached object.

Owns(&appsv1.Deployment{}) specifies the Deployment type as the secondary resource to watch. For each Deployment type Add, Update, or Delete event, the event handler maps each event to a reconcile request for the owner of the deployment. In this case, the owner is the Memcached object for which the deployment was created.

5.4.2.4.2. Controller configurations

You can initialize a controller by using many other useful configurations. For example:

  • Set the maximum number of concurrent reconciles for the controller by using the MaxConcurrentReconciles option, which defaults to 1:

    func (r *MemcachedReconciler) SetupWithManager(mgr ctrl.Manager) error {
        return ctrl.NewControllerManagedBy(mgr).
            For(&cachev1.Memcached{}).
            Owns(&appsv1.Deployment{}).
            WithOptions(controller.Options{
                MaxConcurrentReconciles: 2,
            }).
            Complete(r)
    }
  • Filter watch events using predicates.
  • Choose the type of EventHandler to change how a watch event translates to reconcile requests for the reconcile loop. For Operator relationships that are more complex than primary and secondary resources, you can use the EnqueueRequestsFromMapFunc handler to transform a watch event into an arbitrary set of reconcile requests.

For more details on these and other configurations, see the upstream Builder and Controller GoDocs.

5.4.2.4.3. Reconcile loop

Every controller has a reconciler object with a Reconcile() method that implements the reconcile loop. The reconcile loop is passed the Request argument, which is a namespace and name key used to find the primary resource object, Memcached, from the cache:

import (
	ctrl "sigs.k8s.io/controller-runtime"

	cachev1 "github.com/example-inc/memcached-operator/api/v1"
	...
)

func (r *MemcachedReconciler) Reconcile(ctx context.Context, req ctrl.Request) (ctrl.Result, error) {
  // Lookup the Memcached instance for this reconcile request
  memcached := &cachev1.Memcached{}
  err := r.Get(ctx, req.NamespacedName, memcached)
  ...
}

Based on the return values, result, and error, the request might be requeued and the reconcile loop might be triggered again:

// Reconcile successful - don't requeue
return ctrl.Result{}, nil
// Reconcile failed due to error - requeue
return ctrl.Result{}, err
// Requeue for any reason other than an error
return ctrl.Result{Requeue: true}, nil

You can set the Result.RequeueAfter to requeue the request after a grace period as well:

import "time"

// Reconcile for any reason other than an error after 5 seconds
return ctrl.Result{RequeueAfter: time.Second*5}, nil
Note

You can return Result with RequeueAfter set to periodically reconcile a CR.

For more on reconcilers, clients, and interacting with resource events, see the Controller Runtime Client API documentation.

5.4.2.4.4. Permissions and RBAC manifests

The controller requires certain RBAC permissions to interact with the resources it manages. These are specified using RBAC markers, such as the following:

// +kubebuilder:rbac:groups=cache.example.com,resources=memcacheds,verbs=get;list;watch;create;update;patch;delete
// +kubebuilder:rbac:groups=cache.example.com,resources=memcacheds/status,verbs=get;update;patch
// +kubebuilder:rbac:groups=cache.example.com,resources=memcacheds/finalizers,verbs=update
// +kubebuilder:rbac:groups=apps,resources=deployments,verbs=get;list;watch;create;update;patch;delete
// +kubebuilder:rbac:groups=core,resources=pods,verbs=get;list;

func (r *MemcachedReconciler) Reconcile(ctx context.Context, req ctrl.Request) (ctrl.Result, error) {
  ...
}

The ClusterRole object manifest at config/rbac/role.yaml is generated from the previous markers by using the controller-gen utility whenever the make manifests command is run.

5.4.2.5. Running the Operator

There are three ways you can use the Operator SDK CLI to build and run your Operator:

  • Run locally outside the cluster as a Go program.
  • Run as a deployment on the cluster.
  • Bundle your Operator and use Operator Lifecycle Manager (OLM) to deploy on the cluster.
Note

Before running your Go-based Operator as either a deployment on OpenShift Container Platform or as a bundle that uses OLM, ensure that your project has been updated to use supported images.

5.4.2.5.1. Running locally outside the cluster

You can run your Operator project as a Go program outside of the cluster. This is useful for development purposes to speed up deployment and testing.

Procedure

  • Run the following command to install the custom resource definitions (CRDs) in the cluster configured in your ~/.kube/config file and run the Operator locally:

    $ make install run

    Example output

    ...
    2021-01-10T21:09:29.016-0700	INFO	controller-runtime.metrics	metrics server is starting to listen	{"addr": ":8080"}
    2021-01-10T21:09:29.017-0700	INFO	setup	starting manager
    2021-01-10T21:09:29.017-0700	INFO	controller-runtime.manager	starting metrics server	{"path": "/metrics"}
    2021-01-10T21:09:29.018-0700	INFO	controller-runtime.manager.controller.memcached	Starting EventSource	{"reconciler group": "cache.example.com", "reconciler kind": "Memcached", "source": "kind source: /, Kind="}
    2021-01-10T21:09:29.218-0700	INFO	controller-runtime.manager.controller.memcached	Starting Controller	{"reconciler group": "cache.example.com", "reconciler kind": "Memcached"}
    2021-01-10T21:09:29.218-0700	INFO	controller-runtime.manager.controller.memcached	Starting workers	{"reconciler group": "cache.example.com", "reconciler kind": "Memcached", "worker count": 1}

5.4.2.5.2. Running as a deployment on the cluster

You can run your Operator project as a deployment on your cluster.

Prerequisites

  • Prepared your Go-based Operator to run on OpenShift Container Platform by updating the project to use supported images

Procedure

  1. Run the following make commands to build and push the Operator image. Modify the IMG argument in the following steps to reference a repository that you have access to. You can obtain an account for storing containers at repository sites such as Quay.io.

    1. Build the image:

      $ make docker-build IMG=<registry>/<user>/<image_name>:<tag>
      Note

      The Dockerfile generated by the SDK for the Operator explicitly references GOARCH=amd64 for go build. This can be amended to GOARCH=$TARGETARCH for non-AMD64 architectures. Docker will automatically set the environment variable to the value specified by –platform. With Buildah, the –build-arg will need to be used for the purpose. For more information, see Multiple Architectures.

    2. Push the image to a repository:

      $ make docker-push IMG=<registry>/<user>/<image_name>:<tag>
      Note

      The name and tag of the image, for example IMG=<registry>/<user>/<image_name>:<tag>, in both the commands can also be set in your Makefile. Modify the IMG ?= controller:latest value to set your default image name.

  2. Run the following command to deploy the Operator:

    $ make deploy IMG=<registry>/<user>/<image_name>:<tag>

    By default, this command creates a namespace with the name of your Operator project in the form <project_name>-system and is used for the deployment. This command also installs the RBAC manifests from config/rbac.

  3. Verify that the Operator is running:

    $ oc get deployment -n <project_name>-system

    Example output

    NAME                                    READY   UP-TO-DATE   AVAILABLE   AGE
    <project_name>-controller-manager       1/1     1            1           8m

5.4.2.5.3. Bundling an Operator and deploying with Operator Lifecycle Manager
5.4.2.5.3.1. Bundling an Operator

The Operator bundle format is the default packaging method for Operator SDK and Operator Lifecycle Manager (OLM). You can get your Operator ready for use on OLM by using the Operator SDK to build and push your Operator project as a bundle image.

Prerequisites

  • Operator SDK CLI installed on a development workstation
  • OpenShift CLI (oc) v4.8+ installed
  • Operator project initialized by using the Operator SDK
  • If your Operator is Go-based, your project must be updated to use supported images for running on OpenShift Container Platform

Procedure

  1. Run the following make commands in your Operator project directory to build and push your Operator image. Modify the IMG argument in the following steps to reference a repository that you have access to. You can obtain an account for storing containers at repository sites such as Quay.io.

    1. Build the image:

      $ make docker-build IMG=<registry>/<user>/<operator_image_name>:<tag>
      Note

      The Dockerfile generated by the SDK for the Operator explicitly references GOARCH=amd64 for go build. This can be amended to GOARCH=$TARGETARCH for non-AMD64 architectures. Docker will automatically set the environment variable to the value specified by –platform. With Buildah, the –build-arg will need to be used for the purpose. For more information, see Multiple Architectures.

    2. Push the image to a repository:

      $ make docker-push IMG=<registry>/<user>/<operator_image_name>:<tag>
  2. Create your Operator bundle manifest by running the make bundle command, which invokes several commands, including the Operator SDK generate bundle and bundle validate subcommands:

    $ make bundle IMG=<registry>/<user>/<operator_image_name>:<tag>

    Bundle manifests for an Operator describe how to display, create, and manage an application. The make bundle command creates the following files and directories in your Operator project:

    • A bundle manifests directory named bundle/manifests that contains a ClusterServiceVersion object
    • A bundle metadata directory named bundle/metadata
    • All custom resource definitions (CRDs) in a config/crd directory
    • A Dockerfile bundle.Dockerfile

    These files are then automatically validated by using operator-sdk bundle validate to ensure the on-disk bundle representation is correct.

  3. Build and push your bundle image by running the following commands. OLM consumes Operator bundles using an index image, which reference one or more bundle images.

    1. Build the bundle image. Set BUNDLE_IMG with the details for the registry, user namespace, and image tag where you intend to push the image:

      $ make bundle-build BUNDLE_IMG=<registry>/<user>/<bundle_image_name>:<tag>
    2. Push the bundle image:

      $ docker push <registry>/<user>/<bundle_image_name>:<tag>
5.4.2.5.3.2. Deploying an Operator with Operator Lifecycle Manager

Operator Lifecycle Manager (OLM) helps you to install, update, and manage the lifecycle of Operators and their associated services on a Kubernetes cluster. OLM is installed by default on OpenShift Container Platform and runs as a Kubernetes extension so that you can use the web console and the OpenShift CLI (oc) for all Operator lifecycle management functions without any additional tools.

The Operator bundle format is the default packaging method for Operator SDK and OLM. You can use the Operator SDK to quickly run a bundle image on OLM to ensure that it runs properly.

Prerequisites

  • Operator SDK CLI installed on a development workstation
  • Operator bundle image built and pushed to a registry
  • OLM installed on a Kubernetes-based cluster (v1.16.0 or later if you use apiextensions.k8s.io/v1 CRDs, for example OpenShift Container Platform 4.8)
  • Logged in to the cluster with oc using an account with cluster-admin permissions
  • If your Operator is Go-based, your project must be updated to use supported images for running on OpenShift Container Platform

Procedure

  1. Enter the following command to run the Operator on the cluster:

    $ operator-sdk run bundle \
        [-n <namespace>] \1
        <registry>/<user>/<bundle_image_name>:<tag>
    1
    By default, the command installs the Operator in the currently active project in your ~/.kube/config file. You can add the -n flag to set a different namespace scope for the installation.

    This command performs the following actions:

    • Create an index image referencing your bundle image. The index image is opaque and ephemeral, but accurately reflects how a bundle would be added to a catalog in production.
    • Create a catalog source that points to your new index image, which enables OperatorHub to discover your Operator.
    • Deploy your Operator to your cluster by creating an OperatorGroup, Subscription, InstallPlan, and all other required objects, including RBAC.

5.4.2.6. Creating a custom resource

After your Operator is installed, you can test it by creating a custom resource (CR) that is now provided on the cluster by the Operator.

Prerequisites

  • Example Memcached Operator, which provides the Memcached CR, installed on a cluster

Procedure

  1. Change to the namespace where your Operator is installed. For example, if you deployed the Operator using the make deploy command:

    $ oc project memcached-operator-system
  2. Edit the sample Memcached CR manifest at config/samples/cache_v1_memcached.yaml to contain the following specification:

    apiVersion: cache.example.com/v1
    kind: Memcached
    metadata:
      name: memcached-sample
    ...
    spec:
    ...
      size: 3
  3. Create the CR:

    $ oc apply -f config/samples/cache_v1_memcached.yaml
  4. Ensure that the Memcached Operator creates the deployment for the sample CR with the correct size:

    $ oc get deployments

    Example output

    NAME                                    READY   UP-TO-DATE   AVAILABLE   AGE
    memcached-operator-controller-manager   1/1     1            1           8m
    memcached-sample                        3/3     3            3           1m

  5. Check the pods and CR status to confirm the status is updated with the Memcached pod names.

    1. Check the pods:

      $ oc get pods

      Example output

      NAME                                  READY     STATUS    RESTARTS   AGE
      memcached-sample-6fd7c98d8-7dqdr      1/1       Running   0          1m
      memcached-sample-6fd7c98d8-g5k7v      1/1       Running   0          1m
      memcached-sample-6fd7c98d8-m7vn7      1/1       Running   0          1m

    2. Check the CR status:

      $ oc get memcached/memcached-sample -o yaml

      Example output

      apiVersion: cache.example.com/v1
      kind: Memcached
      metadata:
      ...
        name: memcached-sample
      ...
      spec:
        size: 3
      status:
        nodes:
        - memcached-sample-6fd7c98d8-7dqdr
        - memcached-sample-6fd7c98d8-g5k7v
        - memcached-sample-6fd7c98d8-m7vn7

  6. Update the deployment size.

    1. Update config/samples/cache_v1_memcached.yaml file to change the spec.size field in the Memcached CR from 3 to 5:

      $ oc patch memcached memcached-sample \
          -p '{"spec":{"size": 5}}' \
          --type=merge
    2. Confirm that the Operator changes the deployment size:

      $ oc get deployments

      Example output

      NAME                                    READY   UP-TO-DATE   AVAILABLE   AGE
      memcached-operator-controller-manager   1/1     1            1           10m
      memcached-sample                        5/5     5            5           3m

  7. Clean up the resources that have been created as part of this tutorial.

    • If you used the make deploy command to test the Operator, run the following command:

      $ make undeploy
    • If you used the operator-sdk run bundle command to test the Operator, run the following command:

      $ operator-sdk cleanup <project_name>

5.4.2.7. Additional resources

5.4.3. Project layout for Go-based Operators

The operator-sdk CLI can generate, or scaffold, a number of packages and files for each Operator project.

5.4.3.1. Go-based project layout

Go-based Operator projects, the default type, generated using the operator-sdk init command contain the following files and directories:

File or directoryPurpose

main.go

Main program of the Operator. This instantiates a new manager that registers all custom resource definitions (CRDs) in the apis/ directory and starts all controllers in the controllers/ directory.

apis/

Directory tree that defines the APIs of the CRDs. You must edit the apis/<version>/<kind>_types.go files to define the API for each resource type and import these packages in your controllers to watch for these resource types.

controllers/

Controller implementations. Edit the controller/<kind>_controller.go files to define the reconcile logic of the controller for handling a resource type of the specified kind.

config/

Kubernetes manifests used to deploy your controller on a cluster, including CRDs, RBAC, and certificates.

Makefile

Targets used to build and deploy your controller.

Dockerfile

Instructions used by a container engine to build your Operator.

manifests/

Kubernetes manifests for registering CRDs, setting up RBAC, and deploying the Operator as a deployment.

5.5. Ansible-based Operators

5.5.1. Getting started with Operator SDK for Ansible-based Operators

The Operator SDK includes options for generating an Operator project that leverages existing Ansible playbooks and modules to deploy Kubernetes resources as a unified application, without having to write any Go code.

To demonstrate the basics of setting up and running an Ansible-based Operator using tools and libraries provided by the Operator SDK, Operator developers can build an example Ansible-based Operator for Memcached, a distributed key-value store, and deploy it to a cluster.

5.5.1.1. Prerequisites

5.5.1.2. Creating and deploying Ansible-based Operators

You can build and deploy a simple Ansible-based Operator for Memcached by using the Operator SDK.

Procedure

  1. Create a project.

    1. Create your project directory:

      $ mkdir memcached-operator
    2. Change into the project directory:

      $ cd memcached-operator
    3. Run the operator-sdk init command with the ansible plugin to initialize the project:

      $ operator-sdk init \
          --plugins=ansible \
          --domain=example.com
  2. Create an API.

    Create a simple Memcached API:

    $ operator-sdk create api \
        --group cache \
        --version v1 \
        --kind Memcached \
        --generate-role 1
    1
    Generates an Ansible role for the API.
  3. Build and push the Operator image.

    Use the default Makefile targets to build and push your Operator. Set IMG with a pull spec for your image that uses a registry you can push to:

    $ make docker-build docker-push IMG=<registry>/<user>/<image_name>:<tag>
  4. Run the Operator.

    1. Install the CRD:

      $ make install
    2. Deploy the project to the cluster. Set IMG to the image that you pushed:

      $ make deploy IMG=<registry>/<user>/<image_name>:<tag>
  5. Create a sample custom resource (CR).

    1. Create a sample CR:

      $ oc apply -f config/samples/cache_v1_memcached.yaml \
          -n memcached-operator-system
    2. Watch for the CR to reconcile the Operator:

      $ oc logs deployment.apps/memcached-operator-controller-manager \
          -c manager \
          -n memcached-operator-system

      Example output

      ...
      I0205 17:48:45.881666       7 leaderelection.go:253] successfully acquired lease memcached-operator-system/memcached-operator
      {"level":"info","ts":1612547325.8819902,"logger":"controller-runtime.manager.controller.memcached-controller","msg":"Starting EventSource","source":"kind source: cache.example.com/v1, Kind=Memcached"}
      {"level":"info","ts":1612547325.98242,"logger":"controller-runtime.manager.controller.memcached-controller","msg":"Starting Controller"}
      {"level":"info","ts":1612547325.9824686,"logger":"controller-runtime.manager.controller.memcached-controller","msg":"Starting workers","worker count":4}
      {"level":"info","ts":1612547348.8311093,"logger":"runner","msg":"Ansible-runner exited successfully","job":"4037200794235010051","name":"memcached-sample","namespace":"memcached-operator-system"}

  6. Clean up.

    Run the following command to clean up the resources that have been created as part of this procedure:

    $ make undeploy

5.5.1.3. Next steps

5.5.2. Operator SDK tutorial for Ansible-based Operators

Operator developers can take advantage of Ansible support in the Operator SDK to build an example Ansible-based Operator for Memcached, a distributed key-value store, and manage its lifecycle. This tutorial walks through the following process:

  • Create a Memcached deployment
  • Ensure that the deployment size is the same as specified by the Memcached custom resource (CR) spec
  • Update the Memcached CR status using the status writer with the names of the memcached pods

This process is accomplished by using two centerpieces of the Operator Framework:

Operator SDK
The operator-sdk CLI tool and controller-runtime library API
Operator Lifecycle Manager (OLM)
Installation, upgrade, and role-based access control (RBAC) of Operators on a cluster
Note

This tutorial goes into greater detail than Getting started with Operator SDK for Ansible-based Operators.

5.5.2.1. Prerequisites

5.5.2.2. Creating a project

Use the Operator SDK CLI to create a project called memcached-operator.

Procedure

  1. Create a directory for the project:

    $ mkdir -p $HOME/projects/memcached-operator
  2. Change to the directory:

    $ cd $HOME/projects/memcached-operator
  3. Run the operator-sdk init command with the ansible plugin to initialize the project:

    $ operator-sdk init \
        --plugins=ansible \
        --domain=example.com
5.5.2.2.1. PROJECT file

Among the files generated by the operator-sdk init command is a Kubebuilder PROJECT file. Subsequent operator-sdk commands, as well as help output, that are run from the project root read this file and are aware that the project type is Ansible. For example:

domain: example.com
layout: ansible.sdk.operatorframework.io/v1
projectName: memcached-operator
version: 3

5.5.2.3. Creating an API

Use the Operator SDK CLI to create a Memcached API.

Procedure

  • Run the following command to create an API with group cache, version, v1, and kind Memcached:

    $ operator-sdk create api \
        --group cache \
        --version v1 \
        --kind Memcached \
        --generate-role 1
    1
    Generates an Ansible role for the API.

After creating the API, your Operator project updates with the following structure:

Memcached CRD
Includes a sample Memcached resource
Manager

Program that reconciles the state of the cluster to the desired state by using:

  • A reconciler, either an Ansible role or playbook
  • A watches.yaml file, which connects the Memcached resource to the memcached Ansible role

5.5.2.4. Modifying the manager

Update your Operator project to provide the reconcile logic, in the form of an Ansible role, which runs every time a Memcached resource is created, updated, or deleted.

Procedure

  1. Update the roles/memcached/tasks/main.yml file with the following structure:

    ---
    - name: start memcached
      community.kubernetes.k8s:
        definition:
          kind: Deployment
          apiVersion: apps/v1
          metadata:
            name: '{{ ansible_operator_meta.name }}-memcached'
            namespace: '{{ ansible_operator_meta.namespace }}'
          spec:
            replicas: "{{size}}"
            selector:
              matchLabels:
                app: memcached
            template:
              metadata:
                labels:
                  app: memcached
              spec:
                containers:
                - name: memcached
                  command:
                  - memcached
                  - -m=64
                  - -o
                  - modern
                  - -v
                  image: "docker.io/memcached:1.4.36-alpine"
                  ports:
                    - containerPort: 11211

    This memcached role ensures a memcached deployment exist and sets the deployment size.

  2. Set default values for variables used in your Ansible role by editing the roles/memcached/defaults/main.yml file:

    ---
    # defaults file for Memcached
    size: 1
  3. Update the Memcached sample resource in the config/samples/cache_v1_memcached.yaml file with the following structure:

    apiVersion: cache.example.com/v1
    kind: Memcached
    metadata:
      name: memcached-sample
    spec:
      size: 3

    The key-value pairs in the custom resource (CR) spec are passed to Ansible as extra variables.

Note

The names of all variables in the spec field are converted to snake case, meaning lowercase with an underscore, by the Operator before running Ansible. For example, serviceAccount in the spec becomes service_account in Ansible.

You can disable this case conversion by setting the snakeCaseParameters option to false in your watches.yaml file. It is recommended that you perform some type validation in Ansible on the variables to ensure that your application is receiving expected input.

5.5.2.5. Running the Operator

There are three ways you can use the Operator SDK CLI to build and run your Operator:

  • Run locally outside the cluster as a Go program.
  • Run as a deployment on the cluster.
  • Bundle your Operator and use Operator Lifecycle Manager (OLM) to deploy on the cluster.
5.5.2.5.1. Running locally outside the cluster

You can run your Operator project as a Go program outside of the cluster. This is useful for development purposes to speed up deployment and testing.

Procedure

  • Run the following command to install the custom resource definitions (CRDs) in the cluster configured in your ~/.kube/config file and run the Operator locally:

    $ make install run

    Example output

    ...
    {"level":"info","ts":1612589622.7888272,"logger":"ansible-controller","msg":"Watching resource","Options.Group":"cache.example.com","Options.Version":"v1","Options.Kind":"Memcached"}
    {"level":"info","ts":1612589622.7897573,"logger":"proxy","msg":"Starting to serve","Address":"127.0.0.1:8888"}
    {"level":"info","ts":1612589622.789971,"logger":"controller-runtime.manager","msg":"starting metrics server","path":"/metrics"}
    {"level":"info","ts":1612589622.7899997,"logger":"controller-runtime.manager.controller.memcached-controller","msg":"Starting EventSource","source":"kind source: cache.example.com/v1, Kind=Memcached"}
    {"level":"info","ts":1612589622.8904517,"logger":"controller-runtime.manager.controller.memcached-controller","msg":"Starting Controller"}
    {"level":"info","ts":1612589622.8905244,"logger":"controller-runtime.manager.controller.memcached-controller","msg":"Starting workers","worker count":8}

5.5.2.5.2. Running as a deployment on the cluster

You can run your Operator project as a deployment on your cluster.

Procedure

  1. Run the following make commands to build and push the Operator image. Modify the IMG argument in the following steps to reference a repository that you have access to. You can obtain an account for storing containers at repository sites such as Quay.io.

    1. Build the image:

      $ make docker-build IMG=<registry>/<user>/<image_name>:<tag>
      Note

      The Dockerfile generated by the SDK for the Operator explicitly references GOARCH=amd64 for go build. This can be amended to GOARCH=$TARGETARCH for non-AMD64 architectures. Docker will automatically set the environment variable to the value specified by –platform. With Buildah, the –build-arg will need to be used for the purpose. For more information, see Multiple Architectures.

    2. Push the image to a repository:

      $ make docker-push IMG=<registry>/<user>/<image_name>:<tag>
      Note

      The name and tag of the image, for example IMG=<registry>/<user>/<image_name>:<tag>, in both the commands can also be set in your Makefile. Modify the IMG ?= controller:latest value to set your default image name.

  2. Run the following command to deploy the Operator:

    $ make deploy IMG=<registry>/<user>/<image_name>:<tag>

    By default, this command creates a namespace with the name of your Operator project in the form <project_name>-system and is used for the deployment. This command also installs the RBAC manifests from config/rbac.

  3. Verify that the Operator is running:

    $ oc get deployment -n <project_name>-system

    Example output

    NAME                                    READY   UP-TO-DATE   AVAILABLE   AGE
    <project_name>-controller-manager       1/1     1            1           8m

5.5.2.5.3. Bundling an Operator and deploying with Operator Lifecycle Manager
5.5.2.5.3.1. Bundling an Operator

The Operator bundle format is the default packaging method for Operator SDK and Operator Lifecycle Manager (OLM). You can get your Operator ready for use on OLM by using the Operator SDK to build and push your Operator project as a bundle image.

Prerequisites

  • Operator SDK CLI installed on a development workstation
  • OpenShift CLI (oc) v4.8+ installed
  • Operator project initialized by using the Operator SDK

Procedure

  1. Run the following make commands in your Operator project directory to build and push your Operator image. Modify the IMG argument in the following steps to reference a repository that you have access to. You can obtain an account for storing containers at repository sites such as Quay.io.

    1. Build the image:

      $ make docker-build IMG=<registry>/<user>/<operator_image_name>:<tag>
      Note

      The Dockerfile generated by the SDK for the Operator explicitly references GOARCH=amd64 for go build. This can be amended to GOARCH=$TARGETARCH for non-AMD64 architectures. Docker will automatically set the environment variable to the value specified by –platform. With Buildah, the –build-arg will need to be used for the purpose. For more information, see Multiple Architectures.

    2. Push the image to a repository:

      $ make docker-push IMG=<registry>/<user>/<operator_image_name>:<tag>
  2. Create your Operator bundle manifest by running the make bundle command, which invokes several commands, including the Operator SDK generate bundle and bundle validate subcommands:

    $ make bundle IMG=<registry>/<user>/<operator_image_name>:<tag>

    Bundle manifests for an Operator describe how to display, create, and manage an application. The make bundle command creates the following files and directories in your Operator project:

    • A bundle manifests directory named bundle/manifests that contains a ClusterServiceVersion object
    • A bundle metadata directory named bundle/metadata
    • All custom resource definitions (CRDs) in a config/crd directory
    • A Dockerfile bundle.Dockerfile

    These files are then automatically validated by using operator-sdk bundle validate to ensure the on-disk bundle representation is correct.

  3. Build and push your bundle image by running the following commands. OLM consumes Operator bundles using an index image, which reference one or more bundle images.

    1. Build the bundle image. Set BUNDLE_IMG with the details for the registry, user namespace, and image tag where you intend to push the image:

      $ make bundle-build BUNDLE_IMG=<registry>/<user>/<bundle_image_name>:<tag>
    2. Push the bundle image:

      $ docker push <registry>/<user>/<bundle_image_name>:<tag>
5.5.2.5.3.2. Deploying an Operator with Operator Lifecycle Manager

Operator Lifecycle Manager (OLM) helps you to install, update, and manage the lifecycle of Operators and their associated services on a Kubernetes cluster. OLM is installed by default on OpenShift Container Platform and runs as a Kubernetes extension so that you can use the web console and the OpenShift CLI (oc) for all Operator lifecycle management functions without any additional tools.

The Operator bundle format is the default packaging method for Operator SDK and OLM. You can use the Operator SDK to quickly run a bundle image on OLM to ensure that it runs properly.

Prerequisites

  • Operator SDK CLI installed on a development workstation
  • Operator bundle image built and pushed to a registry
  • OLM installed on a Kubernetes-based cluster (v1.16.0 or later if you use apiextensions.k8s.io/v1 CRDs, for example OpenShift Container Platform 4.8)
  • Logged in to the cluster with oc using an account with cluster-admin permissions

Procedure

  1. Enter the following command to run the Operator on the cluster:

    $ operator-sdk run bundle \
        [-n <namespace>] \1
        <registry>/<user>/<bundle_image_name>:<tag>
    1
    By default, the command installs the Operator in the currently active project in your ~/.kube/config file. You can add the -n flag to set a different namespace scope for the installation.

    This command performs the following actions:

    • Create an index image referencing your bundle image. The index image is opaque and ephemeral, but accurately reflects how a bundle would be added to a catalog in production.
    • Create a catalog source that points to your new index image, which enables OperatorHub to discover your Operator.
    • Deploy your Operator to your cluster by creating an OperatorGroup, Subscription, InstallPlan, and all other required objects, including RBAC.

5.5.2.6. Creating a custom resource

After your Operator is installed, you can test it by creating a custom resource (CR) that is now provided on the cluster by the Operator.

Prerequisites

  • Example Memcached Operator, which provides the Memcached CR, installed on a cluster

Procedure

  1. Change to the namespace where your Operator is installed. For example, if you deployed the Operator using the make deploy command:

    $ oc project memcached-operator-system
  2. Edit the sample Memcached CR manifest at config/samples/cache_v1_memcached.yaml to contain the following specification:

    apiVersion: cache.example.com/v1
    kind: Memcached
    metadata:
      name: memcached-sample
    ...
    spec:
    ...
      size: 3
  3. Create the CR:

    $ oc apply -f config/samples/cache_v1_memcached.yaml
  4. Ensure that the Memcached Operator creates the deployment for the sample CR with the correct size:

    $ oc get deployments

    Example output

    NAME                                    READY   UP-TO-DATE   AVAILABLE   AGE
    memcached-operator-controller-manager   1/1     1            1           8m
    memcached-sample                        3/3     3            3           1m

  5. Check the pods and CR status to confirm the status is updated with the Memcached pod names.

    1. Check the pods:

      $ oc get pods

      Example output

      NAME                                  READY     STATUS    RESTARTS   AGE
      memcached-sample-6fd7c98d8-7dqdr      1/1       Running   0          1m
      memcached-sample-6fd7c98d8-g5k7v      1/1       Running   0          1m
      memcached-sample-6fd7c98d8-m7vn7      1/1       Running   0          1m

    2. Check the CR status:

      $ oc get memcached/memcached-sample -o yaml

      Example output

      apiVersion: cache.example.com/v1
      kind: Memcached
      metadata:
      ...
        name: memcached-sample
      ...
      spec:
        size: 3
      status:
        nodes:
        - memcached-sample-6fd7c98d8-7dqdr
        - memcached-sample-6fd7c98d8-g5k7v
        - memcached-sample-6fd7c98d8-m7vn7

  6. Update the deployment size.

    1. Update config/samples/cache_v1_memcached.yaml file to change the spec.size field in the Memcached CR from 3 to 5:

      $ oc patch memcached memcached-sample \
          -p '{"spec":{"size": 5}}' \
          --type=merge
    2. Confirm that the Operator changes the deployment size:

      $ oc get deployments

      Example output

      NAME                                    READY   UP-TO-DATE   AVAILABLE   AGE
      memcached-operator-controller-manager   1/1     1            1           10m
      memcached-sample                        5/5     5            5           3m

  7. Clean up the resources that have been created as part of this tutorial.

    • If you used the make deploy command to test the Operator, run the following command:

      $ make undeploy
    • If you used the operator-sdk run bundle command to test the Operator, run the following command:

      $ operator-sdk cleanup <project_name>

5.5.2.7. Additional resources

5.5.3. Project layout for Ansible-based Operators

The operator-sdk CLI can generate, or scaffold, a number of packages and files for each Operator project.

5.5.3.1. Ansible-based project layout

Ansible-based Operator projects generated using the operator-sdk init --plugins ansible command contain the following directories and files:

File or directoryPurpose

Dockerfile

Dockerfile for building the container image for the Operator.

Makefile

Targets for building, publishing, deploying the container image that wraps the Operator binary, and targets for installing and uninstalling the custom resource definition (CRD).

PROJECT

YAML file containing metadata information for the Operator.

config/crd

Base CRD files and the kustomization.yaml file settings.

config/default

Collects all Operator manifests for deployment. Use by the make deploy command.

config/manager

Controller manager deployment.

config/prometheus

ServiceMonitor resource for monitoring the Operator.

config/rbac

Role and role binding for leader election and authentication proxy.

config/samples

Sample resources created for the CRDs.

config/testing

Sample configurations for testing.

playbooks/

A subdirectory for the playbooks to run.

roles/

Subdirectory for the roles tree to run.

watches.yaml

Group/version/kind (GVK) of the resources to watch, and the Ansible invocation method. New entries are added by using the create api command.

requirements.yml

YAML file containing the Ansible collections and role dependencies to install during a build.

molecule/

Molecule scenarios for end-to-end testing of your role and Operator.

5.5.4. Ansible support in Operator SDK

5.5.4.1. Custom resource files

Operators use the Kubernetes extension mechanism, custom resource definitions (CRDs), so your custom resource (CR) looks and acts just like the built-in, native Kubernetes objects.

The CR file format is a Kubernetes resource file. The object has mandatory and optional fields:

Table 5.1. Custom resource fields

FieldDescription

apiVersion

Version of the CR to be created.

kind

Kind of the CR to be created.

metadata

Kubernetes-specific metadata to be created.

spec (optional)

Key-value list of variables which are passed to Ansible. This field is empty by default.

status

Summarizes the current state of the object. For Ansible-based Operators, the status subresource is enabled for CRDs and managed by the operator_sdk.util.k8s_status Ansible module by default, which includes condition information to the CR status.

annotations

Kubernetes-specific annotations to be appended to the CR.

The following list of CR annotations modify the behavior of the Operator:

Table 5.2. Ansible-based Operator annotations

AnnotationDescription

ansible.operator-sdk/reconcile-period

Specifies the reconciliation interval for the CR. This value is parsed using the standard Golang package time. Specifically, ParseDuration is used which applies the default suffix of s, giving the value in seconds.

Example Ansible-based Operator annotation

apiVersion: "test1.example.com/v1alpha1"
kind: "Test1"
metadata:
  name: "example"
annotations:
  ansible.operator-sdk/reconcile-period: "30s"

5.5.4.2. watches.yaml file

A group/version/kind (GVK) is a unique identifier for a Kubernetes API. The watches.yaml file contains a list of mappings from custom resources (CRs), identified by its GVK, to an Ansible role or playbook. The Operator expects this mapping file in a predefined location at /opt/ansible/watches.yaml.

Table 5.3. watches.yaml file mappings

FieldDescription

group

Group of CR to watch.

version

Version of CR to watch.

kind

Kind of CR to watch

role (default)

Path to the Ansible role added to the container. For example, if your roles directory is at /opt/ansible/roles/ and your role is named busybox, this value would be /opt/ansible/roles/busybox. This field is mutually exclusive with the playbook field.

playbook

Path to the Ansible playbook added to the container. This playbook is expected to be a way to call roles. This field is mutually exclusive with the role field.

reconcilePeriod (optional)

The reconciliation interval, how often the role or playbook is run, for a given CR.

manageStatus (optional)

When set to true (default), the Operator manages the status of the CR generically. When set to false, the status of the CR is managed elsewhere, by the specified role or playbook or in a separate controller.

Example watches.yaml file

- version: v1alpha1 1
  group: test1.example.com
  kind: Test1
  role: /opt/ansible/roles/Test1

- version: v1alpha1 2
  group: test2.example.com
  kind: Test2
  playbook: /opt/ansible/playbook.yml

- version: v1alpha1 3
  group: test3.example.com
  kind: Test3
  playbook: /opt/ansible/test3.yml
  reconcilePeriod: 0
  manageStatus: false

1
Simple example mapping Test1 to the test1 role.
2
Simple example mapping Test2 to a playbook.
3
More complex example for the Test3 kind. Disables re-queuing and managing the CR status in the playbook.
5.5.4.2.1. Advanced options

Advanced features can be enabled by adding them to your watches.yaml file per GVK. They can go below the group, version, kind and playbook or role fields.

Some features can be overridden per resource using an annotation on that CR. The options that can be overridden have the annotation specified below.

Table 5.4. Advanced watches.yaml file options

FeatureYAML keyDescriptionAnnotation for overrideDefault value

Reconcile period

reconcilePeriod

Time between reconcile runs for a particular CR.

ansible.operator-sdk/reconcile-period

1m

Manage status

manageStatus

Allows the Operator to manage the conditions section of each CR status section.

 

true

Watch dependent resources

watchDependentResources

Allows the Operator to dynamically watch resources that are created by Ansible.

 

true

Watch cluster-scoped resources

watchClusterScopedResources

Allows the Operator to watch cluster-scoped resources that are created by Ansible.

 

false

Max runner artifacts

maxRunnerArtifacts

Manages the number of artifact directories that Ansible Runner keeps in the Operator container for each individual resource.

ansible.operator-sdk/max-runner-artifacts

20

Example watches.yml file with advanced options

- version: v1alpha1
  group: app.example.com
  kind: AppService
  playbook: /opt/ansible/playbook.yml
  maxRunnerArtifacts: 30
  reconcilePeriod: 5s
  manageStatus: False
  watchDependentResources: False

5.5.4.3. Extra variables sent to Ansible

Extra variables can be sent to Ansible, which are then managed by the Operator. The spec section of the custom resource (CR) passes along the key-value pairs as extra variables. This is equivalent to extra variables passed in to the ansible-playbook command.

The Operator also passes along additional variables under the meta field for the name of the CR and the namespace of the CR.

For the following CR example:

apiVersion: "app.example.com/v1alpha1"
kind: "Database"
metadata:
  name: "example"
spec:
  message: "Hello world 2"
  newParameter: "newParam"

The structure passed to Ansible as extra variables is:

{ "meta": {
        "name": "<cr_name>",
        "namespace": "<cr_namespace>",
  },
  "message": "Hello world 2",
  "new_parameter": "newParam",
  "_app_example_com_database": {
     <full_crd>
   },
}

The message and newParameter fields are set in the top level as extra variables, and meta provides the relevant metadata for the CR as defined in the Operator. The meta fields can be accessed using dot notation in Ansible, for example:

---
- debug:
    msg: "name: {{ ansible_operator_meta.name }}, {{ ansible_operator_meta.namespace }}"

5.5.4.4. Ansible Runner directory

Ansible Runner keeps information about Ansible runs in the container. This is located at /tmp/ansible-operator/runner/<group>/<version>/<kind>/<namespace>/<name>.

Additional resources

5.5.5. Kubernetes Collection for Ansible

To manage the lifecycle of your application on Kubernetes using Ansible, you can use the Kubernetes Collection for Ansible. This collection of Ansible modules allows a developer to either leverage their existing Kubernetes resource files written in YAML or express the lifecycle management in native Ansible.

One of the biggest benefits of using Ansible in conjunction with existing Kubernetes resource files is the ability to use Jinja templating so that you can customize resources with the simplicity of a few variables in Ansible.

This section goes into detail on usage of the Kubernetes Collection. To get started, install the collection on your local workstation and test it using a playbook before moving on to using it within an Operator.

5.5.5.1. Installing the Kubernetes Collection for Ansible

You can install the Kubernetes Collection for Ansible on your local workstation.

Procedure

  1. Install Ansible 2.9+:

    $ sudo dnf install ansible
  2. Install the OpenShift python client package:

    $ pip3 install openshift
  3. Install the Kubernetes Collection using one of the following methods:

    • You can install the collection directly from Ansible Galaxy:

      $ ansible-galaxy collection install community.kubernetes
    • If you have already initialized your Operator, you might have a requirements.yml file at the top level of your project. This file specifies Ansible dependencies that must be installed for your Operator to function. By default, this file installs the community.kubernetes collection as well as the operator_sdk.util collection, which provides modules and plugins for Operator-specific fuctions.

      To install the dependent modules from the requirements.yml file:

      $ ansible-galaxy collection install -r requirements.yml

5.5.5.2. Testing the Kubernetes Collection locally

Operator developers can run the Ansible code from their local machine as opposed to running and rebuilding the Operator each time.

Prerequisites

  • Initialize an Ansible-based Operator project and create an API that has a generated Ansible role by using the Operator SDK
  • Install the Kubernetes Collection for Ansible

Procedure

  1. In your Ansible-based Operator project directory, modify the roles/<kind>/tasks/main.yml file with the Ansible logic that you want. The roles/<kind>/ directory is created when you use the --generate-role flag while creating an API. The <kind> replaceable matches the kind that you specified for the API.

    The following example creates and deletes a config map based on the value of a variable named state:

    ---
    - name: set ConfigMap example-config to {{ state }}
      community.kubernetes.k8s:
        api_version: v1
        kind: ConfigMap
        name: example-config
        namespace: default 1
        state: "{{ state }}"
      ignore_errors: true 2
    1
    Change this value if you want the config map to be created in a different namespace from default.
    2
    Setting ignore_errors: true ensures that deleting a nonexistent config map does not fail.
  2. Modify the roles/<kind>/defaults/main.yml file to set state to present by default:

    ---
    state: present
  3. Create an Ansible playbook by creating a playbook.yml file in the top-level of your project directory, and include your <kind> role:

    ---
    - hosts: localhost
      roles:
        - <kind>
  4. Run the playbook:

    $ ansible-playbook playbook.yml

    Example output

    [WARNING]: provided hosts list is empty, only localhost is available. Note that the implicit localhost does not match 'all'
    
    PLAY [localhost] ********************************************************************************
    
    TASK [Gathering Facts] ********************************************************************************
    ok: [localhost]
    
    TASK [memcached : set ConfigMap example-config to present] ********************************************************************************
    changed: [localhost]
    
    PLAY RECAP ********************************************************************************
    localhost                  : ok=2    changed=1    unreachable=0    failed=0    skipped=0    rescued=0    ignored=0

  5. Verify that the config map was created:

    $ oc get configmaps

    Example output

    NAME               DATA   AGE
    example-config     0      2m1s

  6. Rerun the playbook setting state to absent:

    $ ansible-playbook playbook.yml --extra-vars state=absent

    Example output

    [WARNING]: provided hosts list is empty, only localhost is available. Note that the implicit localhost does not match 'all'
    
    PLAY [localhost] ********************************************************************************
    
    TASK [Gathering Facts] ********************************************************************************
    ok: [localhost]
    
    TASK [memcached : set ConfigMap example-config to absent] ********************************************************************************
    changed: [localhost]
    
    PLAY RECAP ********************************************************************************
    localhost                  : ok=2    changed=1    unreachable=0    failed=0    skipped=0    rescued=0    ignored=0

  7. Verify that the config map was deleted:

    $ oc get configmaps

5.5.5.3. Next steps

5.5.6. Using Ansible inside an Operator

After you are familiar with using the Kubernetes Collection for Ansible locally, you can trigger the same Ansible logic inside of an Operator when a custom resource (CR) changes. This example maps an Ansible role to a specific Kubernetes resource that the Operator watches. This mapping is done in the watches.yaml file.

5.5.6.1. Custom resource files

Operators use the Kubernetes extension mechanism, custom resource definitions (CRDs), so your custom resource (CR) looks and acts just like the built-in, native Kubernetes objects.

The CR file format is a Kubernetes resource file. The object has mandatory and optional fields:

Table 5.5. Custom resource fields

FieldDescription

apiVersion

Version of the CR to be created.

kind

Kind of the CR to be created.

metadata

Kubernetes-specific metadata to be created.

spec (optional)

Key-value list of variables which are passed to Ansible. This field is empty by default.

status

Summarizes the current state of the object. For Ansible-based Operators, the status subresource is enabled for CRDs and managed by the operator_sdk.util.k8s_status Ansible module by default, which includes condition information to the CR status.

annotations

Kubernetes-specific annotations to be appended to the CR.

The following list of CR annotations modify the behavior of the Operator:

Table 5.6. Ansible-based Operator annotations

AnnotationDescription

ansible.operator-sdk/reconcile-period

Specifies the reconciliation interval for the CR. This value is parsed using the standard Golang package time. Specifically, ParseDuration is used which applies the default suffix of s, giving the value in seconds.

Example Ansible-based Operator annotation

apiVersion: "test1.example.com/v1alpha1"
kind: "Test1"
metadata:
  name: "example"
annotations:
  ansible.operator-sdk/reconcile-period: "30s"

5.5.6.2. Testing an Ansible-based Operator locally

You can test the logic inside of an Ansible-based Operator running locally by using the make run command from the top-level directory of your Operator project. The make run Makefile target runs the ansible-operator binary locally, which reads from the watches.yaml file and uses your ~/.kube/config file to communicate with a Kubernetes cluster just as the k8s modules do.

Note

You can customize the roles path by setting the environment variable ANSIBLE_ROLES_PATH or by using the ansible-roles-path flag. If the role is not found in the ANSIBLE_ROLES_PATH value, the Operator looks for it in {{current directory}}/roles.

Prerequisites

Procedure

  1. Install your custom resource definition (CRD) and proper role-based access control (RBAC) definitions for your custom resource (CR):

    $ make install

    Example output

    /usr/bin/kustomize build config/crd | kubectl apply -f -
    customresourcedefinition.apiextensions.k8s.io/memcacheds.cache.example.com created

  2. Run the make run command:

    $ make run

    Example output

    /home/user/memcached-operator/bin/ansible-operator run
    {"level":"info","ts":1612739145.2871568,"logger":"cmd","msg":"Version","Go Version":"go1.15.5","GOOS":"linux","GOARCH":"amd64","ansible-operator":"v1.8.0","commit":"1abf57985b43bf6a59dcd18147b3c574fa57d3f6"}
    ...
    {"level":"info","ts":1612739148.347306,"logger":"controller-runtime.metrics","msg":"metrics server is starting to listen","addr":":8080"}
    {"level":"info","ts":1612739148.3488882,"logger":"watches","msg":"Environment variable not set; using default value","envVar":"ANSIBLE_VERBOSITY_MEMCACHED_CACHE_EXAMPLE_COM","default":2}
    {"level":"info","ts":1612739148.3490262,"logger":"cmd","msg":"Environment variable not set; using default value","Namespace":"","envVar":"ANSIBLE_DEBUG_LOGS","ANSIBLE_DEBUG_LOGS":false}
    {"level":"info","ts":1612739148.3490646,"logger":"ansible-controller","msg":"Watching resource","Options.Group":"cache.example.com","Options.Version":"v1","Options.Kind":"Memcached"}
    {"level":"info","ts":1612739148.350217,"logger":"proxy","msg":"Starting to serve","Address":"127.0.0.1:8888"}
    {"level":"info","ts":1612739148.3506632,"logger":"controller-runtime.manager","msg":"starting metrics server","path":"/metrics"}
    {"level":"info","ts":1612739148.350784,"logger":"controller-runtime.manager.controller.memcached-controller","msg":"Starting EventSource","source":"kind source: cache.example.com/v1, Kind=Memcached"}
    {"level":"info","ts":1612739148.5511978,"logger":"controller-runtime.manager.controller.memcached-controller","msg":"Starting Controller"}
    {"level":"info","ts":1612739148.5512562,"logger":"controller-runtime.manager.controller.memcached-controller","msg":"Starting workers","worker count":8}

    With the Operator now watching your CR for events, the creation of a CR will trigger your Ansible role to run.

    Note

    Consider an example config/samples/<gvk>.yaml CR manifest:

    apiVersion: <group>.example.com/v1alpha1
    kind: <kind>
    metadata:
      name: "<kind>-sample"

    Because the spec field is not set, Ansible is invoked with no extra variables. Passing extra variables from a CR to Ansible is covered in another section. It is important to set reasonable defaults for the Operator.

  3. Create an instance of your CR with the default variable state set to present:

    $ oc apply -f config/samples/<gvk>.yaml
  4. Check that the example-config config map was created:

    $ oc get configmaps

    Example output

    NAME                    STATUS    AGE
    example-config          Active    3s

  5. Modify your config/samples/<gvk>.yaml file to set the state field to absent. For example:

    apiVersion: cache.example.com/v1
    kind: Memcached
    metadata:
      name: memcached-sample
    spec:
      state: absent
  6. Apply the changes:

    $ oc apply -f config/samples/<gvk>.yaml
  7. Confirm that the config map is deleted:

    $ oc get configmap

5.5.6.3. Testing an Ansible-based Operator on the cluster

After you have tested your custom Ansible logic locally inside of an Operator, you can test the Operator inside of a pod on an OpenShift Container Platform cluster, which is prefered for production use.

You can run your Operator project as a deployment on your cluster.

Procedure

  1. Run the following make commands to build and push the Operator image. Modify the IMG argument in the following steps to reference a repository that you have access to. You can obtain an account for storing containers at repository sites such as Quay.io.

    1. Build the image:

      $ make docker-build IMG=<registry>/<user>/<image_name>:<tag>
      Note

      The Dockerfile generated by the SDK for the Operator explicitly references GOARCH=amd64 for go build. This can be amended to GOARCH=$TARGETARCH for non-AMD64 architectures. Docker will automatically set the environment variable to the value specified by –platform. With Buildah, the –build-arg will need to be used for the purpose. For more information, see Multiple Architectures.

    2. Push the image to a repository:

      $ make docker-push IMG=<registry>/<user>/<image_name>:<tag>
      Note

      The name and tag of the image, for example IMG=<registry>/<user>/<image_name>:<tag>, in both the commands can also be set in your Makefile. Modify the IMG ?= controller:latest value to set your default image name.

  2. Run the following command to deploy the Operator:

    $ make deploy IMG=<registry>/<user>/<image_name>:<tag>

    By default, this command creates a namespace with the name of your Operator project in the form <project_name>-system and is used for the deployment. This command also installs the RBAC manifests from config/rbac.

  3. Verify that the Operator is running:

    $ oc get deployment -n <project_name>-system

    Example output

    NAME                                    READY   UP-TO-DATE   AVAILABLE   AGE
    <project_name>-controller-manager       1/1     1            1           8m

5.5.6.4. Ansible logs

Ansible-based Operators provide logs about the Ansible run, which can be useful for debugging your Ansible tasks. The logs can also contain detailed information about the internals of the Operator and its interactions with Kubernetes.

5.5.6.4.1. Viewing Ansible logs

Prerequisites

  • Ansible-based Operator running as a deployment on a cluster

Procedure

  • To view logs from an Ansible-based Operator, run the following command:

    $ oc logs deployment/<project_name>-controller-manager \
        -c manager \1
        -n <namespace> 2
    1
    View logs from the manager container.
    2
    If you used the make deploy command to run the Operator as a deployment, use the <project_name>-system namespace.

    Example output

    {"level":"info","ts":1612732105.0579333,"logger":"cmd","msg":"Version","Go Version":"go1.15.5","GOOS":"linux","GOARCH":"amd64","ansible-operator":"v1.8.0","commit":"1abf57985b43bf6a59dcd18147b3c574fa57d3f6"}
    {"level":"info","ts":1612732105.0587437,"logger":"cmd","msg":"WATCH_NAMESPACE environment variable not set. Watching all namespaces.","Namespace":""}
    I0207 21:08:26.110949       7 request.go:645] Throttling request took 1.035521578s, request: GET:https://172.30.0.1:443/apis/flowcontrol.apiserver.k8s.io/v1alpha1?timeout=32s
    {"level":"info","ts":1612732107.768025,"logger":"controller-runtime.metrics","msg":"metrics server is starting to listen","addr":"127.0.0.1:8080"}
    {"level":"info","ts":1612732107.768796,"logger":"watches","msg":"Environment variable not set; using default value","envVar":"ANSIBLE_VERBOSITY_MEMCACHED_CACHE_EXAMPLE_COM","default":2}
    {"level":"info","ts":1612732107.7688773,"logger":"cmd","msg":"Environment variable not set; using default value","Namespace":"","envVar":"ANSIBLE_DEBUG_LOGS","ANSIBLE_DEBUG_LOGS":false}
    {"level":"info","ts":1612732107.7688901,"logger":"ansible-controller","msg":"Watching resource","Options.Group":"cache.example.com","Options.Version":"v1","Options.Kind":"Memcached"}
    {"level":"info","ts":1612732107.770032,"logger":"proxy","msg":"Starting to serve","Address":"127.0.0.1:8888"}
    I0207 21:08:27.770185       7 leaderelection.go:243] attempting to acquire leader lease  memcached-operator-system/memcached-operator...
    {"level":"info","ts":1612732107.770202,"logger":"controller-runtime.manager","msg":"starting metrics server","path":"/metrics"}
    I0207 21:08:27.784854       7 leaderelection.go:253] successfully acquired lease memcached-operator-system/memcached-operator
    {"level":"info","ts":1612732107.7850506,"logger":"controller-runtime.manager.controller.memcached-controller","msg":"Starting EventSource","source":"kind source: cache.example.com/v1, Kind=Memcached"}
    {"level":"info","ts":1612732107.8853772,"logger":"controller-runtime.manager.controller.memcached-controller","msg":"Starting Controller"}
    {"level":"info","ts":1612732107.8854098,"logger":"controller-runtime.manager.controller.memcached-controller","msg":"Starting workers","worker count":4}

5.5.6.4.2. Enabling full Ansible results in logs

You can set the environment variable ANSIBLE_DEBUG_LOGS to True to enable checking the full Ansible result in logs, which can be helpful when debugging.

Procedure

  • Edit the config/manager/manager.yaml and config/default/manager_auth_proxy_patch.yaml files to include the following configuration:

          containers:
          - name: manager
            env:
            - name: ANSIBLE_DEBUG_LOGS
              value: "True"
5.5.6.4.3. Enabling verbose debugging in logs

While developing an Ansible-based Operator, it can be helpful to enable additional debugging in logs.

Procedure

  • Add the ansible.sdk.operatorframework.io/verbosity annotation to your custom resource to enable the verbosity level that you want. For example:

    apiVersion: "cache.example.com/v1alpha1"
    kind: "Memcached"
    metadata:
      name: "example-memcached"
      annotations:
        "ansible.sdk.operatorframework.io/verbosity": "4"
    spec:
      size: 4

5.5.7. Custom resource status management

5.5.7.1. About custom resource status in Ansible-based Operators

Ansible-based Operators automatically update custom resource (CR) status subresources with generic information about the previous Ansible run. This includes the number of successful and failed tasks and relevant error messages as shown:

status:
  conditions:
  - ansibleResult:
      changed: 3
      completion: 2018-12-03T13:45:57.13329
      failures: 1
      ok: 6
      skipped: 0
    lastTransitionTime: 2018-12-03T13:45:57Z
    message: 'Status code was -1 and not [200]: Request failed: <urlopen error [Errno
      113] No route to host>'
    reason: Failed
    status: "True"
    type: Failure
  - lastTransitionTime: 2018-12-03T13:46:13Z
    message: Running reconciliation
    reason: Running
    status: "True"
    type: Running

Ansible-based Operators also allow Operator authors to supply custom status values with the k8s_status Ansible module, which is included in the operator_sdk.util collection. This allows the author to update the status from within Ansible with any key-value pair as desired.

By default, Ansible-based Operators always include the generic Ansible run output as shown above. If you would prefer your application did not update the status with Ansible output, you can track the status manually from your application.

5.5.7.2. Tracking custom resource status manually

You can use the operator_sdk.util collection to modify your Ansible-based Operator to track custom resource (CR) status manually from your application.

Prerequisites

  • Ansible-based Operator project created by using the Operator SDK

Procedure

  1. Update the watches.yaml file with a manageStatus field set to false:

    - version: v1
      group: api.example.com
      kind: <kind>
      role: <role>
      manageStatus: false
  2. Use the operator_sdk.util.k8s_status Ansible module to update the subresource. For example, to update with key test and value data, operator_sdk.util can be used as shown:

    - operator_sdk.util.k8s_status:
        api_version: app.example.com/v1
        kind: <kind>
        name: "{{ ansible_operator_meta.name }}"
        namespace: "{{ ansible_operator_meta.namespace }}"
        status:
          test: data
  3. You can declare collections in the meta/main.yml file for the role, which is included for scaffolded Ansible-based Operators:

    collections:
      - operator_sdk.util
  4. After declaring collections in the role meta, you can invoke the k8s_status module directly:

    k8s_status:
      ...
      status:
        key1: value1

5.6. Helm-based Operators

5.6.1. Getting started with Operator SDK for Helm-based Operators

The Operator SDK includes options for generating an Operator project that leverages existing Helm charts to deploy Kubernetes resources as a unified application, without having to write any Go code.

To demonstrate the basics of setting up and running an Helm-based Operator using tools and libraries provided by the Operator SDK, Operator developers can build an example Helm-based Operator for Nginx and deploy it to a cluster.

5.6.1.1. Prerequisites

  • Operator SDK CLI installed
  • OpenShift CLI (oc) v4.8+ installed
  • Logged into an OpenShift Container Platform 4.8 cluster with oc with an account that has cluster-admin permissions
  • To allow the cluster pull the image, the repository where you push your image must be set as public, or you must configure an image pull secret

5.6.1.2. Creating and deploying Helm-based Operators

You can build and deploy a simple Helm-based Operator for Nginx by using the Operator SDK.

Procedure

  1. Create a project.

    1. Create your project directory:

      $ mkdir nginx-operator
    2. Change into the project directory:

      $ cd nginx-operator
    3. Run the operator-sdk init command with the helm plugin to initialize the project:

      $ operator-sdk init \
          --plugins=helm
  2. Create an API.

    Create a simple Nginx API:

    $ operator-sdk create api \
        --group demo \
        --version v1 \
        --kind Nginx

    This API uses the built-in Helm chart boilerplate from the helm create command.

  3. Build and push the Operator image.

    Use the default Makefile targets to build and push your Operator. Set IMG with a pull spec for your image that uses a registry you can push to:

    $ make docker-build docker-push IMG=<registry>/<user>/<image_name>:<tag>
  4. Run the Operator.

    1. Install the CRD:

      $ make install
    2. Deploy the project to the cluster. Set IMG to the image that you pushed:

      $ make deploy IMG=<registry>/<user>/<image_name>:<tag>
  5. Add a security context constraint (SCC).

    The Nginx service account requires privileged access to run in OpenShift Container Platform. Add the following SCC to the service account for the nginx-sample pod:

    $ oc adm policy add-scc-to-user \
        anyuid system:serviceaccount:nginx-operator-system:nginx-sample
  6. Create a sample custom resource (CR).

    1. Create a sample CR:

      $ oc apply -f config/samples/demo_v1_nginx.yaml \
          -n nginx-operator-system
    2. Watch for the CR to reconcile the Operator:

      $ oc logs deployment.apps/nginx-operator-controller-manager \
          -c manager \
          -n nginx-operator-system
  7. Clean up.

    Run the following command to clean up the resources that have been created as part of this procedure:

    $ make undeploy

5.6.1.3. Next steps

5.6.2. Operator SDK tutorial for Helm-based Operators

Operator developers can take advantage of Helm support in the Operator SDK to build an example Helm-based Operator for Nginx and manage its lifecycle. This tutorial walks through the following process:

  • Create a Nginx deployment
  • Ensure that the deployment size is the same as specified by the Nginx custom resource (CR) spec
  • Update the Nginx CR status using the status writer with the names of the nginx pods

This process is accomplished using two centerpieces of the Operator Framework:

Operator SDK
The operator-sdk CLI tool and controller-runtime library API
Operator Lifecycle Manager (OLM)
Installation, upgrade, and role-based access control (RBAC) of Operators on a cluster
Note

This tutorial goes into greater detail than Getting started with Operator SDK for Helm-based Operators.

5.6.2.1. Prerequisites

  • Operator SDK CLI installed
  • OpenShift CLI (oc) v4.8+ installed
  • Logged into an OpenShift Container Platform 4.8 cluster with oc with an account that has cluster-admin permissions
  • To allow the cluster pull the image, the repository where you push your image must be set as public, or you must configure an image pull secret

5.6.2.2. Creating a project

Use the Operator SDK CLI to create a project called nginx-operator.

Procedure

  1. Create a directory for the project:

    $ mkdir -p $HOME/projects/nginx-operator
  2. Change to the directory:

    $ cd $HOME/projects/nginx-operator
  3. Run the operator-sdk init command with the helm plugin to initialize the project:

    $ operator-sdk init \
        --plugins=helm \
        --domain=example.com \
        --group=demo \
        --version=v1 \
        --kind=Nginx
    Note

    By default, the helm plugin initializes a project using a boilerplate Helm chart. You can use additional flags, such as the --helm-chart flag, to initialize a project using an existing Helm chart.

    The init command creates the nginx-operator project specifically for watching a resource with API version example.com/v1 and kind Nginx.

  4. For Helm-based projects, the init command generates the RBAC rules in the config/rbac/role.yaml file based on the resources that would be deployed by the default manifest for the chart. Verify that the rules generated in this file meet the permission requirements of the Operator.
5.6.2.2.1. Existing Helm charts

Instead of creating your project with a boilerplate Helm chart, you can alternatively use an existing chart, either from your local file system or a remote chart repository, by using the following flags:

  • --helm-chart
  • --helm-chart-repo
  • --helm-chart-version

If the --helm-chart flag is specified, the --group, --version, and --kind flags become optional. If left unset, the following default values are used:

FlagValue

--domain

my.domain

--group

charts

--version

v1

--kind

Deduced from the specified chart

If the --helm-chart flag specifies a local chart archive, for example example-chart-1.2.0.tgz, or directory, the chart is validated and unpacked or copied into the project. Otherwise, the Operator SDK attempts to fetch the chart from a remote repository.

If a custom repository URL is not specified by the --helm-chart-repo flag, the following chart reference formats are supported:

FormatDescription

<repo_name>/<chart_name>

Fetch the Helm chart named <chart_name> from the helm chart repository named <repo_name>, as specified in the $HELM_HOME/repositories/repositories.yaml file. Use the helm repo add command to configure this file.

<url>

Fetch the Helm chart archive at the specified URL.

If a custom repository URL is specified by --helm-chart-repo, the following chart reference format is supported:

FormatDescription

<chart_name>

Fetch the Helm chart named <chart_name> in the Helm chart repository specified by the --helm-chart-repo URL value.

If the --helm-chart-version flag is unset, the Operator SDK fetches the latest available version of the Helm chart. Otherwise, it fetches the specified version. The optional --helm-chart-version flag is not used when the chart specified with the --helm-chart flag refers to a specific version, for example when it is a local path or a URL.

For more details and examples, run:

$ operator-sdk init --plugins helm --help
5.6.2.2.2. PROJECT file

Among the files generated by the operator-sdk init command is a Kubebuilder PROJECT file. Subsequent operator-sdk commands, as well as help output, that are run from the project root read this file and are aware that the project type is Helm. For example:

domain: example.com
layout: helm.sdk.operatorframework.io/v1
projectName: helm-operator
resources:
- group: demo
  kind: Nginx
  version: v1
version: 3

5.6.2.3. Understanding the Operator logic

For this example, the nginx-operator project executes the following reconciliation logic for each Nginx custom resource (CR):

  • Create an Nginx deployment if it does not exist.
  • Create an Nginx service if it does not exist.
  • Create an Nginx ingress if it is enabled and does not exist.
  • Ensure that the deployment, service, and optional ingress match the desired configuration as specified by the Nginx CR, for example the replica count, image, and service type.

By default, the nginx-operator project watches Nginx resource events as shown in the watches.yaml file and executes Helm releases using the specified chart:

# Use the 'create api' subcommand to add watches to this file.
- group: demo
  version: v1
  kind: Nginx
  chart: helm-charts/nginx
# +kubebuilder:scaffold:watch
5.6.2.3.1. Sample Helm chart

When a Helm Operator project is created, the Operator SDK creates a sample Helm chart that contains a set of templates for a simple Nginx release.

For this example, templates are available for deployment, service, and ingress resources, along with a NOTES.txt template, which Helm chart developers use to convey helpful information about a release.

If you are not already familiar with Helm charts, review the Helm developer documentation.

5.6.2.3.2. Modifying the custom resource spec

Helm uses a concept called values to provide customizations to the defaults of a Helm chart, which are defined in the values.yaml file.

You can override these defaults by setting the desired values in the custom resource (CR) spec. You can use the number of replicas as an example.

Procedure

  1. The helm-charts/nginx/values.yaml file has a value called replicaCount set to 1 by default. To have two Nginx instances in your deployment, your CR spec must contain replicaCount: 2.

    Edit the config/samples/demo_v1_nginx.yaml file to set replicaCount: 2:

    apiVersion: demo.example.com/v1
    kind: Nginx
    metadata:
      name: nginx-sample
    ...
    spec:
    ...
      replicaCount: 2
  2. Similarly, the default service port is set to 80. To use 8080, edit the config/samples/demo_v1_nginx.yaml file to set spec.port: 8080,which adds the service port override:

    apiVersion: demo.example.com/v1
    kind: Nginx
    metadata:
      name: nginx-sample
    spec:
      replicaCount: 2
      service:
        port: 8080

The Helm Operator applies the entire spec as if it was the contents of a values file, just like the helm install -f ./overrides.yaml command.

5.6.2.4. Running the Operator

There are three ways you can use the Operator SDK CLI to build and run your Operator:

  • Run locally outside the cluster as a Go program.
  • Run as a deployment on the cluster.
  • Bundle your Operator and use Operator Lifecycle Manager (OLM) to deploy on the cluster.
5.6.2.4.1. Running locally outside the cluster

You can run your Operator project as a Go program outside of the cluster. This is useful for development purposes to speed up deployment and testing.

Procedure

  • Run the following command to install the custom resource definitions (CRDs) in the cluster configured in your ~/.kube/config file and run the Operator locally:

    $ make install run

    Example output

    ...
    {"level":"info","ts":1612652419.9289865,"logger":"controller-runtime.metrics","msg":"metrics server is starting to listen","addr":":8080"}
    {"level":"info","ts":1612652419.9296563,"logger":"helm.controller","msg":"Watching resource","apiVersion":"demo.example.com/v1","kind":"Nginx","namespace":"","reconcilePeriod":"1m0s"}
    {"level":"info","ts":1612652419.929983,"logger":"controller-runtime.manager","msg":"starting metrics server","path":"/metrics"}
    {"level":"info","ts":1612652419.930015,"logger":"controller-runtime.manager.controller.nginx-controller","msg":"Starting EventSource","source":"kind source: demo.example.com/v1, Kind=Nginx"}
    {"level":"info","ts":1612652420.2307851,"logger":"controller-runtime.manager.controller.nginx-controller","msg":"Starting Controller"}
    {"level":"info","ts":1612652420.2309358,"logger":"controller-runtime.manager.controller.nginx-controller","msg":"Starting workers","worker count":8}

5.6.2.4.2. Running as a deployment on the cluster

You can run your Operator project as a deployment on your cluster.

Procedure

  1. Run the following make commands to build and push the Operator image. Modify the IMG argument in the following steps to reference a repository that you have access to. You can obtain an account for storing containers at repository sites such as Quay.io.

    1. Build the image:

      $ make docker-build IMG=<registry>/<user>/<image_name>:<tag>
      Note

      The Dockerfile generated by the SDK for the Operator explicitly references GOARCH=amd64 for go build. This can be amended to GOARCH=$TARGETARCH for non-AMD64 architectures. Docker will automatically set the environment variable to the value specified by –platform. With Buildah, the –build-arg will need to be used for the purpose. For more information, see Multiple Architectures.

    2. Push the image to a repository:

      $ make docker-push IMG=<registry>/<user>/<image_name>:<tag>
      Note

      The name and tag of the image, for example IMG=<registry>/<user>/<image_name>:<tag>, in both the commands can also be set in your Makefile. Modify the IMG ?= controller:latest value to set your default image name.

  2. Run the following command to deploy the Operator:

    $ make deploy IMG=<registry>/<user>/<image_name>:<tag>

    By default, this command creates a namespace with the name of your Operator project in the form <project_name>-system and is used for the deployment. This command also installs the RBAC manifests from config/rbac.

  3. Verify that the Operator is running:

    $ oc get deployment -n <project_name>-system

    Example output

    NAME                                    READY   UP-TO-DATE   AVAILABLE   AGE
    <project_name>-controller-manager       1/1     1            1           8m

5.6.2.4.3. Bundling an Operator and deploying with Operator Lifecycle Manager
5.6.2.4.3.1. Bundling an Operator

The Operator bundle format is the default packaging method for Operator SDK and Operator Lifecycle Manager (OLM). You can get your Operator ready for use on OLM by using the Operator SDK to build and push your Operator project as a bundle image.

Prerequisites

  • Operator SDK CLI installed on a development workstation
  • OpenShift CLI (oc) v4.8+ installed
  • Operator project initialized by using the Operator SDK

Procedure

  1. Run the following make commands in your Operator project directory to build and push your Operator image. Modify the IMG argument in the following steps to reference a repository that you have access to. You can obtain an account for storing containers at repository sites such as Quay.io.

    1. Build the image:

      $ make docker-build IMG=<registry>/<user>/<operator_image_name>:<tag>
      Note

      The Dockerfile generated by the SDK for the Operator explicitly references GOARCH=amd64 for go build. This can be amended to GOARCH=$TARGETARCH for non-AMD64 architectures. Docker will automatically set the environment variable to the value specified by –platform. With Buildah, the –build-arg will need to be used for the purpose. For more information, see Multiple Architectures.

    2. Push the image to a repository:

      $ make docker-push IMG=<registry>/<user>/<operator_image_name>:<tag>
  2. Create your Operator bundle manifest by running the make bundle command, which invokes several commands, including the Operator SDK generate bundle and bundle validate subcommands:

    $ make bundle IMG=<registry>/<user>/<operator_image_name>:<tag>

    Bundle manifests for an Operator describe how to display, create, and manage an application. The make bundle command creates the following files and directories in your Operator project:

    • A bundle manifests directory named bundle/manifests that contains a ClusterServiceVersion object
    • A bundle metadata directory named bundle/metadata
    • All custom resource definitions (CRDs) in a config/crd directory
    • A Dockerfile bundle.Dockerfile

    These files are then automatically validated by using operator-sdk bundle validate to ensure the on-disk bundle representation is correct.

  3. Build and push your bundle image by running the following commands. OLM consumes Operator bundles using an index image, which reference one or more bundle images.

    1. Build the bundle image. Set BUNDLE_IMG with the details for the registry, user namespace, and image tag where you intend to push the image:

      $ make bundle-build BUNDLE_IMG=<registry>/<user>/<bundle_image_name>:<tag>
    2. Push the bundle image:

      $ docker push <registry>/<user>/<bundle_image_name>:<tag>
5.6.2.4.3.2. Deploying an Operator with Operator Lifecycle Manager

Operator Lifecycle Manager (OLM) helps you to install, update, and manage the lifecycle of Operators and their associated services on a Kubernetes cluster. OLM is installed by default on OpenShift Container Platform and runs as a Kubernetes extension so that you can use the web console and the OpenShift CLI (oc) for all Operator lifecycle management functions without any additional tools.

The Operator bundle format is the default packaging method for Operator SDK and OLM. You can use the Operator SDK to quickly run a bundle image on OLM to ensure that it runs properly.

Prerequisites

  • Operator SDK CLI installed on a development workstation
  • Operator bundle image built and pushed to a registry
  • OLM installed on a Kubernetes-based cluster (v1.16.0 or later if you use apiextensions.k8s.io/v1 CRDs, for example OpenShift Container Platform 4.8)
  • Logged in to the cluster with oc using an account with cluster-admin permissions

Procedure

  1. Enter the following command to run the Operator on the cluster:

    $ operator-sdk run bundle \
        [-n <namespace>] \1
        <registry>/<user>/<bundle_image_name>:<tag>
    1
    By default, the command installs the Operator in the currently active project in your ~/.kube/config file. You can add the -n flag to set a different namespace scope for the installation.

    This command performs the following actions:

    • Create an index image referencing your bundle image. The index image is opaque and ephemeral, but accurately reflects how a bundle would be added to a catalog in production.
    • Create a catalog source that points to your new index image, which enables OperatorHub to discover your Operator.
    • Deploy your Operator to your cluster by creating an OperatorGroup, Subscription, InstallPlan, and all other required objects, including RBAC.

5.6.2.5. Creating a custom resource

After your Operator is installed, you can test it by creating a custom resource (CR) that is now provided on the cluster by the Operator.

Prerequisites

  • Example Nginx Operator, which provides the Nginx CR, installed on a cluster

Procedure

  1. Change to the namespace where your Operator is installed. For example, if you deployed the Operator using the make deploy command:

    $ oc project nginx-operator-system
  2. Edit the sample Nginx CR manifest at config/samples/demo_v1_nginx.yaml to contain the following specification:

    apiVersion: demo.example.com/v1
    kind: Nginx
    metadata:
      name: nginx-sample
    ...
    spec:
    ...
      replicaCount: 3
  3. The Nginx service account requires privileged access to run in OpenShift Container Platform. Add the following security context constraint (SCC) to the service account for the nginx-sample pod:

    $ oc adm policy add-scc-to-user \
        anyuid system:serviceaccount:nginx-operator-system:nginx-sample
  4. Create the CR:

    $ oc apply -f config/samples/demo_v1_nginx.yaml
  5. Ensure that the Nginx Operator creates the deployment for the sample CR with the correct size:

    $ oc get deployments

    Example output

    NAME                                    READY   UP-TO-DATE   AVAILABLE   AGE
    nginx-operator-controller-manager       1/1     1            1           8m
    nginx-sample                            3/3     3            3           1m

  6. Check the pods and CR status to confirm the status is updated with the Nginx pod names.

    1. Check the pods:

      $ oc get pods

      Example output

      NAME                                  READY     STATUS    RESTARTS   AGE
      nginx-sample-6fd7c98d8-7dqdr          1/1       Running   0          1m
      nginx-sample-6fd7c98d8-g5k7v          1/1       Running   0          1m
      nginx-sample-6fd7c98d8-m7vn7          1/1       Running   0          1m

    2. Check the CR status:

      $ oc get nginx/nginx-sample -o yaml

      Example output

      apiVersion: demo.example.com/v1
      kind: Nginx
      metadata:
      ...
        name: nginx-sample
      ...
      spec:
        replicaCount: 3
      status:
        nodes:
        - nginx-sample-6fd7c98d8-7dqdr
        - nginx-sample-6fd7c98d8-g5k7v
        - nginx-sample-6fd7c98d8-m7vn7

  7. Update the deployment size.

    1. Update config/samples/demo_v1_nginx.yaml file to change the spec.size field in the Nginx CR from 3 to 5:

      $ oc patch nginx nginx-sample \
          -p '{"spec":{"replicaCount": 5}}' \
          --type=merge
    2. Confirm that the Operator changes the deployment size:

      $ oc get deployments

      Example output

      NAME                                    READY   UP-TO-DATE   AVAILABLE   AGE
      nginx-operator-controller-manager       1/1     1            1           10m
      nginx-sample                            5/5     5            5           3m

  8. Clean up the resources that have been created as part of this tutorial.

    • If you used the make deploy command to test the Operator, run the following command:

      $ make undeploy
    • If you used the operator-sdk run bundle command to test the Operator, run the following command:

      $ operator-sdk cleanup <project_name>

5.6.2.6. Additional resources

5.6.3. Project layout for Helm-based Operators

The operator-sdk CLI can generate, or scaffold, a number of packages and files for each Operator project.

5.6.3.1. Helm-based project layout

Helm-based Operator projects generated using the operator-sdk init --plugins helm command contain the following directories and files:

File/foldersPurpose

config

Kustomize manifests for deploying the Operator on a Kubernetes cluster.

helm-charts/

Helm chart initialized with the operator-sdk create api command.

Dockerfile

Used to build the Operator image with the make docker-build command.

watches.yaml

Group/version/kind (GVK) and Helm chart location.

Makefile

Targets used to manage the project.

PROJECT

YAML file containing metadata information for the Operator.

5.6.4. Helm support in Operator SDK

5.6.4.1. Helm charts

One of the Operator SDK options for generating an Operator project includes leveraging an existing Helm chart to deploy Kubernetes resources as a unified application, without having to write any Go code. Such Helm-based Operators are designed to excel at stateless applications that require very little logic when rolled out, because changes should be applied to the Kubernetes objects that are generated as part of the chart. This may sound limiting, but can be sufficient for a surprising amount of use-cases as shown by the proliferation of Helm charts built by the Kubernetes community.

The main function of an Operator is to read from a custom object that represents your application instance and have its desired state match what is running. In the case of a Helm-based Operator, the spec field of the object is a list of configuration options that are typically described in the Helm values.yaml file. Instead of setting these values with flags using the Helm CLI (for example, helm install -f values.yaml), you can express them within a custom resource (CR), which, as a native Kubernetes object, enables the benefits of RBAC applied to it and an audit trail.

For an example of a simple CR called Tomcat:

apiVersion: apache.org/v1alpha1
kind: Tomcat
metadata:
  name: example-app
spec:
  replicaCount: 2

The replicaCount value, 2 in this case, is propagated into the template of the chart where the following is used:

{{ .Values.replicaCount }}

After an Operator is built and deployed, you can deploy a new instance of an app by creating a new instance of a CR, or list the different instances running in all environments using the oc command:

$ oc get Tomcats --all-namespaces

There is no requirement use the Helm CLI or install Tiller; Helm-based Operators import code from the Helm project. All you have to do is have an instance of the Operator running and register the CR with a custom resource definition (CRD). Because it obeys RBAC, you can more easily prevent production changes.

5.7. Defining cluster service versions (CSVs)

A cluster service version (CSV), defined by a ClusterServiceVersion object, is a YAML manifest created from Operator metadata that assists Operator Lifecycle Manager (OLM) in running the Operator in a cluster. It is the metadata that accompanies an Operator container image, used to populate user interfaces with information such as its logo, description, and version. It is also a source of technical information that is required to run the Operator, like the RBAC rules it requires and which custom resources (CRs) it manages or depends on.

The Operator SDK includes the CSV generator to generate a CSV for the current Operator project, customized using information contained in YAML manifests and Operator source files.

A CSV-generating command removes the responsibility of Operator authors having in-depth OLM knowledge in order for their Operator to interact with OLM or publish metadata to the Catalog Registry. Further, because the CSV spec will likely change over time as new Kubernetes and OLM features are implemented, the Operator SDK is equipped to easily extend its update system to handle new CSV features going forward.

5.7.1. How CSV generation works

Operator bundle manifests, which include cluster service versions (CSVs), describe how to display, create, and manage an application with Operator Lifecycle Manager (OLM). The CSV generator in the Operator SDK, called by the generate bundle subcommand, is the first step towards publishing your Operator to a catalog and deploying it with OLM. The subcommand requires certain input manifests to construct a CSV manifest; all inputs are read when the command is invoked, along with a CSV base, to idempotently generate or regenerate a CSV.

Typically, the generate kustomize manifests subcommand would be run first to generate the input Kustomize bases that are consumed by the generate bundle subcommand. However, the Operator SDK provides the make bundle command, which automates several tasks, including running the following subcommands in order:

  1. generate kustomize manifests
  2. generate bundle
  3. bundle validate

Additional resources

5.7.1.1. Generated files and resources

The make bundle command creates the following files and directories in your Operator project:

  • A bundle manifests directory named bundle/manifests that contains a ClusterServiceVersion (CSV) object
  • A bundle metadata directory named bundle/metadata
  • All custom resource definitions (CRDs) in a config/crd directory
  • A Dockerfile bundle.Dockerfile

The following resources are typically included in a CSV:

Role
Defines Operator permissions within a namespace.
ClusterRole
Defines cluster-wide Operator permissions.
Deployment
Defines how an Operand of an Operator is run in pods.
CustomResourceDefinition (CRD)
Defines custom resources that your Operator reconciles.
Custom resource examples
Examples of resources adhering to the spec of a particular CRD.

5.7.1.2. Version management

The --version flag for the generate bundle subcommand supplies a semantic version for your bundle when creating one for the first time and when upgrading an existing one.

By setting the VERSION variable in your Makefile, the --version flag is automatically invoked using that value when the generate bundle subcommand is run by the make bundle command. The CSV version is the same as the Operator version, and a new CSV is generated when upgrading Operator versions.

5.7.2. Manually-defined CSV fields

Many CSV fields cannot be populated using generated, generic manifests that are not specific to Operator SDK. These fields are mostly human-written metadata about the Operator and various custom resource definitions (CRDs).

Operator authors must directly modify their cluster service version (CSV) YAML file, adding personalized data to the following required fields. The Operator SDK gives a warning during CSV generation when a lack of data in any of the required fields is detected.

The following tables detail which manually-defined CSV fields are required and which are optional.

Table 5.7. Required

FieldDescription

metadata.name

A unique name for this CSV. Operator version should be included in the name to ensure uniqueness, for example app-operator.v0.1.1.

metadata.capabilities

The capability level according to the Operator maturity model. Options include Basic Install, Seamless Upgrades, Full Lifecycle, Deep Insights, and Auto Pilot.

spec.displayName

A public name to identify the Operator.

spec.description

A short description of the functionality of the Operator.

spec.keywords

Keywords describing the Operator.

spec.maintainers

Human or organizational entities maintaining the Operator, with a name and email.

spec.provider

The provider of the Operator (usually an organization), with a name.

spec.labels

Key-value pairs to be used by Operator internals.

spec.version

Semantic version of the Operator, for example 0.1.1.

spec.customresourcedefinitions

Any CRDs the Operator uses. This field is populated automatically by the Operator SDK if any CRD YAML files are present in deploy/. However, several fields not in the CRD manifest spec require user input:

  • description: description of the CRD.
  • resources: any Kubernetes resources leveraged by the CRD, for example Pod and StatefulSet objects.
  • specDescriptors: UI hints for inputs and outputs of the Operator.

Table 5.8. Optional

FieldDescription

spec.replaces

The name of the CSV being replaced by this CSV.

spec.links

URLs (for example, websites and documentation) pertaining to the Operator or application being managed, each with a name and url.

spec.selector

Selectors by which the Operator can pair resources in a cluster.

spec.icon

A base64-encoded icon unique to the Operator, set in a base64data field with a mediatype.

spec.maturity

The level of maturity the software has achieved at this version. Options include planning, pre-alpha, alpha, beta, stable, mature, inactive, and deprecated.

Further details on what data each field above should hold are found in the CSV spec.

Note

Several YAML fields currently requiring user intervention can potentially be parsed from Operator code.

Additional resources

5.7.2.1. Operator metadata annotations

Operator developers can manually define certain annotations in the metadata of a cluster service version (CSV) to enable features or highlight capabilities in user interfaces (UIs), such as OperatorHub.

The following table lists Operator metadata annotations that can be manually defined using metadata.annotations fields.

Table 5.9. Annotations

FieldDescription

alm-examples

Provide custom resource definition (CRD) templates with a minimum set of configuration. Compatible UIs pre-fill this template for users to further customize.

operatorframework.io/initialization-resource

Specify a single required custom resource by adding operatorframework.io/initialization-resource annotation to the cluster service version (CSV) during Operator installation. The user is then prompted to create the custom resource through a template provided in the CSV. Must include a template that contains a complete YAML definition.

operatorframework.io/suggested-namespace

Set a suggested namespace where the Operator should be deployed.

operators.openshift.io/infrastructure-features

Infrastructure features supported by the Operator. Users can view and filter by these features when discovering Operators through OperatorHub in the web console. Valid, case-sensitive values:

  • disconnected: Operator supports being mirrored into disconnected catalogs, including all dependencies, and does not require internet access. All related images required for mirroring are listed by the Operator.
  • cnf: Operator provides a Cloud-native Network Functions (CNF) Kubernetes plugin.
  • cni: Operator provides a Container Network Interface (CNI) Kubernetes plugin.
  • csi: Operator provides a Container Storage Interface (CSI) Kubernetes plugin.
  • fips: Operator accepts the FIPS mode of the underlying platform and works on nodes that are booted into FIPS mode.
Important

The use of FIPS Validated / Modules in Process cryptographic libraries is only supported on OpenShift Container Platform deployments on the x86_64 architecture.

  • proxy-aware: Operator supports running on a cluster behind a proxy. Operator accepts the standard proxy environment variables HTTP_PROXY and HTTPS_PROXY, which Operator Lifecycle Manager (OLM) provides to the Operator automatically when the cluster is configured to use a proxy. Required environment variables are passed down to Operands for managed workloads.

operators.openshift.io/valid-subscription

Free-form array for listing any specific subscriptions that are required to use the Operator. For example, '["3Scale Commercial License", "Red Hat Managed Integration"]'.

operators.operatorframework.io/internal-objects

Hides CRDs in the UI that are not meant for user manipulation.

Example use cases

Operator supports disconnected and proxy-aware

operators.openshift.io/infrastructure-features: '["disconnected", "proxy-aware"]'

Operator requires an OpenShift Container Platform license

operators.openshift.io/valid-subscription: '["OpenShift Container Platform"]'

Operator requires a 3scale license

operators.openshift.io/valid-subscription: '["3Scale Commercial License", "Red Hat Managed Integration"]'

Operator supports disconnected and proxy-aware, and requires an OpenShift Container Platform license

operators.openshift.io/infrastructure-features: '["disconnected", "proxy-aware"]'
operators.openshift.io/valid-subscription: '["OpenShift Container Platform"]'

5.7.3. Enabling your Operator for restricted network environments

As an Operator author, your Operator must meet additional requirements to run properly in a restricted network, or disconnected, environment.

Operator requirements for supporting disconnected mode

  • In the cluster service version (CSV) of your Operator:

    • List any related images, or other container images that your Operator might require to perform their functions.
    • Reference all specified images by a digest (SHA) and not by a tag.
  • All dependencies of your Operator must also support running in a disconnected mode.
  • Your Operator must not require any off-cluster resources.

For the CSV requirements, you can make the following changes as the Operator author.

Prerequisites

  • An Operator project with a CSV.

Procedure

  1. Use SHA references to related images in two places in the CSV for your Operator:

    1. Update spec.relatedImages:

      ...
      spec:
        relatedImages: 1
          - name: etcd-operator 2
            image: quay.io/etcd-operator/operator@sha256:d134a9865524c29fcf75bbc4469013bc38d8a15cb5f41acfddb6b9e492f556e4 3
          - name: etcd-image
            image: quay.io/etcd-operator/etcd@sha256:13348c15263bd8838ec1d5fc4550ede9860fcbb0f843e48cbccec07810eebb68
      ...
      1
      Create a relatedImages section and set the list of related images.
      2
      Specify a unique identifier for the image.
      3
      Specify each image by a digest (SHA), not by an image tag.
    2. Update the env section in the deployment when declaring environment variables that inject the image that the Operator should use:

      spec:
        install:
          spec:
            deployments:
            - name: etcd-operator-v3.1.1
              spec:
                replicas: 1
                selector:
                  matchLabels:
                    name: etcd-operator
                strategy:
                  type: Recreate
                template:
                  metadata:
                    labels:
                      name: etcd-operator
                  spec:
                    containers:
                    - args:
                      - /opt/etcd/bin/etcd_operator_run.sh
                      env:
                      - name: WATCH_NAMESPACE
                        valueFrom:
                          fieldRef:
                            fieldPath: metadata.annotations['olm.targetNamespaces']
                      - name: ETCD_OPERATOR_DEFAULT_ETCD_IMAGE 1
                        value: quay.io/etcd-operator/etcd@sha256:13348c15263bd8838ec1d5fc4550ede9860fcbb0f843e48cbccec07810eebb68 2
                      - name: ETCD_LOG_LEVEL
                        value: INFO
                      image: quay.io/etcd-operator/operator@sha256:d134a9865524c29fcf75bbc4469013bc38d8a15cb5f41acfddb6b9e492f556e4 3
                      imagePullPolicy: IfNotPresent
                      livenessProbe:
                        httpGet:
                          path: /healthy
                          port: 8080
                        initialDelaySeconds: 10
                        periodSeconds: 30
                      name: etcd-operator
                      readinessProbe:
                        httpGet:
                          path: /ready
                          port: 8080
                        initialDelaySeconds: 10
                        periodSeconds: 30
                      resources: {}
                    serviceAccountName: etcd-operator
          strategy: deployment
      1
      Inject the images referenced by the Operator by using environment variables.
      2
      Specify each image by a digest (SHA), not by an image tag.
      3
      Also reference the Operator container image by a digest (SHA), not by an image tag.
      Note

      When configuring probes, the timeoutSeconds value must be lower than the periodSeconds value. The timeoutSeconds default value is 1. The periodSeconds default value is 10.

  2. Add the disconnected annotation, which indicates that the Operator works in a disconnected environment:

    metadata:
      annotations:
        operators.openshift.io/infrastructure-features: '["disconnected"]'

    Operators can be filtered in OperatorHub by this infrastructure feature.

5.7.4. Enabling your Operator for multiple architectures and operating systems

Operator Lifecycle Manager (OLM) assumes that all Operators run on Linux hosts. However, as an Operator author, you can specify whether your Operator supports managing workloads on other architectures, if worker nodes are available in the OpenShift Container Platform cluster.

If your Operator supports variants other than AMD64 and Linux, you can add labels to the cluster service version (CSV) that provides the Operator to list the supported variants. Labels indicating supported architectures and operating systems are defined by the following:

labels:
    operatorframework.io/arch.<arch>: supported 1
    operatorframework.io/os.<os>: supported 2
1
Set <arch> to a supported string.
2
Set <os> to a supported string.
Note

Only the labels on the channel head of the default channel are considered for filtering package manifests by label. This means, for example, that providing an additional architecture for an Operator in the non-default channel is possible, but that architecture is not available for filtering in the PackageManifest API.

If a CSV does not include an os label, it is treated as if it has the following Linux support label by default:

labels:
    operatorframework.io/os.linux: supported

If a CSV does not include an arch label, it is treated as if it has the following AMD64 support label by default:

labels:
    operatorframework.io/arch.amd64: supported

If an Operator supports multiple node architectures or operating systems, you can add multiple labels, as well.

Prerequisites

  • An Operator project with a CSV.
  • To support listing multiple architectures and operating systems, your Operator image referenced in the CSV must be a manifest list image.
  • For the Operator to work properly in restricted network, or disconnected, environments, the image referenced must also be specified using a digest (SHA) and not by a tag.

Procedure

  • Add a label in the metadata.labels of your CSV for each supported architecture and operating system that your Operator supports:

    labels:
      operatorframework.io/arch.s390x: supported
      operatorframework.io/os.zos: supported
      operatorframework.io/os.linux: supported 1
      operatorframework.io/arch.amd64: supported 2
    1 2
    After you add a new architecture or operating system, you must also now include the default os.linux and arch.amd64 variants explicitly.

Additional resources

5.7.4.1. Architecture and operating system support for Operators

The following strings are supported in Operator Lifecycle Manager (OLM) on OpenShift Container Platform when labeling or filtering Operators that support multiple architectures and operating systems:

Table 5.10. Architectures supported on OpenShift Container Platform

ArchitectureString

AMD64

amd64

64-bit PowerPC little-endian

ppc64le

IBM Z

s390x

Table 5.11. Operating systems supported on OpenShift Container Platform

Operating systemString

Linux

linux

z/OS

zos

Note

Different versions of OpenShift Container Platform and other Kubernetes-based distributions might support a different set of architectures and operating systems.

5.7.5. Setting a suggested namespace

Some Operators must be deployed in a specific namespace, or with ancillary resources in specific namespaces, to work properly. If resolved from a subscription, Operator Lifecycle Manager (OLM) defaults the namespaced resources of an Operator to the namespace of its subscription.

As an Operator author, you can instead express a desired target namespace as part of your cluster service version (CSV) to maintain control over the final namespaces of the resources installed for their Operators. When adding the Operator to a cluster using OperatorHub, this enables the web console to autopopulate the suggested namespace for the cluster administrator during the installation process.

Procedure

  • In your CSV, set the operatorframework.io/suggested-namespace annotation to your suggested namespace:

    metadata:
      annotations:
        operatorframework.io/suggested-namespace: <namespace> 1
    1
    Set your suggested namespace.

5.7.6. Enabling Operator conditions

Operator Lifecycle Manager (OLM) provides Operators with a channel to communicate complex states that influence OLM behavior while managing the Operator. By default, OLM creates an OperatorCondition custom resource definition (CRD) when it installs an Operator. Based on the conditions set in the OperatorCondition custom resource (CR), the behavior of OLM changes accordingly.

To support Operator conditions, an Operator must be able to read the OperatorCondition CR created by OLM and have the ability to complete the following tasks:

  • Get the specific condition.
  • Set the status of a specific condition.

This can be accomplished by using the operator-lib library. An Operator author can provide a controller-runtime client in their Operator for the library to access the OperatorCondition CR owned by the Operator in the cluster.

The library provides a generic Conditions interface, which has the following methods to Get and Set a conditionType in the OperatorCondition CR:

Get
To get the specific condition, the library uses the client.Get function from controller-runtime, which requires an ObjectKey of type types.NamespacedName present in conditionAccessor.
Set
To update the status of the specific condition, the library uses the client.Update function from controller-runtime. An error occurs if the conditionType is not present in the CRD.

The Operator is allowed to modify only the status subresource of the CR. Operators can either delete or update the status.conditions array to include the condition. For more details on the format and description of the fields present in the conditions, see the upstream Condition GoDocs.

Note

Operator SDK v1.8.0 supports operator-lib v0.3.0.

Prerequisites

  • An Operator project generated using the Operator SDK.

Procedure

To enable Operator conditions in your Operator project:

  1. In the go.mod file of your Operator project, add operator-framework/operator-lib as a required library:

    module github.com/example-inc/memcached-operator
    
    go 1.15
    
    require (
      k8s.io/apimachinery v0.19.2
      k8s.io/client-go v0.19.2
      sigs.k8s.io/controller-runtime v0.7.0
      operator-framework/operator-lib v0.3.0
    )
  2. Write your own constructor in your Operator logic that will result in the following outcomes:

    • Accepts a controller-runtime client.
    • Accepts a conditionType.
    • Returns a Condition interface to update or add conditions.

    Because OLM currently supports the Upgradeable condition, you can create an interface that has methods to access the Upgradeable condition. For example:

    import (
      ...
      apiv1 "github.com/operator-framework/api/pkg/operators/v1"
    )
    
    func NewUpgradeable(cl client.Client) (Condition, error) {
      return NewCondition(cl, "apiv1.OperatorUpgradeable")
    }
    
    cond, err := NewUpgradeable(cl);

    In this example, the NewUpgradeable constructor is further used to create a variable cond of type Condition. The cond variable would in turn have Get and Set methods, which can be used for handling the OLM Upgradeable condition.

Additional resources

5.7.7. Defining webhooks

Webhooks allow Operator authors to intercept, modify, and accept or reject resources before they are saved to the object store and handled by the Operator controller. Operator Lifecycle Manager (OLM) can manage the lifecycle of these webhooks when they are shipped alongside your Operator.

The cluster service version (CSV) resource of an Operator can include a webhookdefinitions section to define the following types of webhooks:

  • Admission webhooks (validating and mutating)
  • Conversion webhooks

Procedure

  • Add a webhookdefinitions section to the spec section of the CSV of your Operator and include any webhook definitions using a type of ValidatingAdmissionWebhook, MutatingAdmissionWebhook, or ConversionWebhook. The following example contains all three types of webhooks:

    CSV containing webhooks

      apiVersion: operators.coreos.com/v1alpha1
      kind: ClusterServiceVersion
      metadata:
        name: webhook-operator.v0.0.1
      spec:
        customresourcedefinitions:
          owned:
          - kind: WebhookTest
            name: webhooktests.webhook.operators.coreos.io 1
            version: v1
        install:
          spec:
            deployments:
            - name: webhook-operator-webhook
              ...
              ...
              ...
          strategy: deployment
        installModes:
        - supported: false
          type: OwnNamespace
        - supported: false
          type: SingleNamespace
        - supported: false
          type: MultiNamespace
        - supported: true
          type: AllNamespaces
        webhookdefinitions:
        - type: ValidatingAdmissionWebhook 2
          admissionReviewVersions:
          - v1beta1
          - v1
          containerPort: 443
          targetPort: 4343
          deploymentName: webhook-operator-webhook
          failurePolicy: Fail
          generateName: vwebhooktest.kb.io
          rules:
          - apiGroups:
            - webhook.operators.coreos.io
            apiVersions:
            - v1
            operations:
            - CREATE
            - UPDATE
            resources:
            - webhooktests
          sideEffects: None
          webhookPath: /validate-webhook-operators-coreos-io-v1-webhooktest
        - type: MutatingAdmissionWebhook 3
          admissionReviewVersions:
          - v1beta1
          - v1
          containerPort: 443
          targetPort: 4343
          deploymentName: webhook-operator-webhook
          failurePolicy: Fail
          generateName: mwebhooktest.kb.io
          rules:
          - apiGroups:
            - webhook.operators.coreos.io
            apiVersions:
            - v1
            operations:
            - CREATE
            - UPDATE
            resources:
            - webhooktests
          sideEffects: None
          webhookPath: /mutate-webhook-operators-coreos-io-v1-webhooktest
        - type: ConversionWebhook 4
          admissionReviewVersions:
          - v1beta1
          - v1
          containerPort: 443
          targetPort: 4343
          deploymentName: webhook-operator-webhook
          generateName: cwebhooktest.kb.io
          sideEffects: None
          webhookPath: /convert
          conversionCRDs:
          - webhooktests.webhook.operators.coreos.io 5
    ...

    1
    The CRDs targeted by the conversion webhook must exist here.
    2
    A validating admission webhook.
    3
    A mutating admission webhook.
    4
    A conversion webhook.
    5
    The spec.PreserveUnknownFields property of each CRD must be set to false or nil.

5.7.7.1. Webhook considerations for OLM

When deploying an Operator with webhooks using Operator Lifecycle Manager (OLM), you must define the following:

  • The type field must be set to either ValidatingAdmissionWebhook, MutatingAdmissionWebhook, or ConversionWebhook, or the CSV will be placed in a failed phase.
  • The CSV must contain a deployment whose name is equivalent to the value supplied in the deploymentName field of the webhookdefinition.

When the webhook is created, OLM ensures that the webhook only acts upon namespaces that match the Operator group that the Operator is deployed in.

Certificate authority constraints

OLM is configured to provide each deployment with a single certificate authority (CA). The logic that generates and mounts the CA into the deployment was originally used by the API service lifecycle logic. As a result:

  • The TLS certificate file is mounted to the deployment at /apiserver.local.config/certificates/apiserver.crt.
  • The TLS key file is mounted to the deployment at /apiserver.local.config/certificates/apiserver.key.
Admission webhook rules constraints

To prevent an Operator from configuring the cluster into an unrecoverable state, OLM places the CSV in the failed phase if the rules defined in an admission webhook intercept any of the following requests:

  • Requests that target all groups
  • Requests that target the operators.coreos.com group
  • Requests that target the ValidatingWebhookConfigurations or MutatingWebhookConfigurations resources
Conversion webhook constraints

OLM places the CSV in the failed phase if a conversion webhook definition does not adhere to the following constraints:

  • CSVs featuring a conversion webhook can only support the AllNamespaces install mode.
  • The CRD targeted by the conversion webhook must have its spec.preserveUnknownFields field set to false or nil.
  • The conversion webhook defined in the CSV must target an owned CRD.
  • There can only be one conversion webhook on the entire cluster for a given CRD.

5.7.8. Understanding your custom resource definitions (CRDs)

There are two types of custom resource definitions (CRDs) that your Operator can use: ones that are owned by it and ones that it depends on, which are required.

5.7.8.1. Owned CRDs

The custom resource definitions (CRDs) owned by your Operator are the most important part of your CSV. This establishes the link between your Operator and the required RBAC rules, dependency management, and other Kubernetes concepts.

It is common for your Operator to use multiple CRDs to link together concepts, such as top-level database configuration in one object and a representation of replica sets in another. Each one should be listed out in the CSV file.

Table 5.12. Owned CRD fields

FieldDescriptionRequired/optional

Name

The full name of your CRD.

Required

Version

The version of that object API.

Required

Kind

The machine readable name of your CRD.

Required

DisplayName

A human readable version of your CRD name, for example MongoDB Standalone.

Required

Description

A short description of how this CRD is used by the Operator or a description of the functionality provided by the CRD.

Required

Group

The API group that this CRD belongs to, for example database.example.com.

Optional

Resources

Your CRDs own one or more types of Kubernetes objects. These are listed in the resources section to inform your users of the objects they might need to troubleshoot or how to connect to the application, such as the service or ingress rule that exposes a database.

It is recommended to only list out the objects that are important to a human, not an exhaustive list of everything you orchestrate. For example, do not list config maps that store internal state that are not meant to be modified by a user.

Optional

SpecDescriptors, StatusDescriptors, and ActionDescriptors

These descriptors are a way to hint UIs with certain inputs or outputs of your Operator that are most important to an end user. If your CRD contains the name of a secret or config map that the user must provide, you can specify that here. These items are linked and highlighted in compatible UIs.

There are three types of descriptors:

  • SpecDescriptors: A reference to fields in the spec block of an object.
  • StatusDescriptors: A reference to fields in the status block of an object.
  • ActionDescriptors: A reference to actions that can be performed on an object.

All descriptors accept the following fields:

  • DisplayName: A human readable name for the Spec, Status, or Action.
  • Description: A short description of the Spec, Status, or Action and how it is used by the Operator.
  • Path: A dot-delimited path of the field on the object that this descriptor describes.
  • X-Descriptors: Used to determine which "capabilities" this descriptor has and which UI component to use. See the openshift/console project for a canonical list of React UI X-Descriptors for OpenShift Container Platform.

Also see the openshift/console project for more information on Descriptors in general.

Optional

The following example depicts a MongoDB Standalone CRD that requires some user input in the form of a secret and config map, and orchestrates services, stateful sets, pods and config maps:

Example owned CRD

      - displayName: MongoDB Standalone
        group: mongodb.com
        kind: MongoDbStandalone
        name: mongodbstandalones.mongodb.com
        resources:
          - kind: Service
            name: ''
            version: v1
          - kind: StatefulSet
            name: ''
            version: v1beta2
          - kind: Pod
            name: ''
            version: v1
          - kind: ConfigMap
            name: ''
            version: v1
        specDescriptors:
          - description: Credentials for Ops Manager or Cloud Manager.
            displayName: Credentials
            path: credentials
            x-descriptors:
              - 'urn:alm:descriptor:com.tectonic.ui:selector:core:v1:Secret'
          - description: Project this deployment belongs to.
            displayName: Project
            path: project
            x-descriptors:
              - 'urn:alm:descriptor:com.tectonic.ui:selector:core:v1:ConfigMap'
          - description: MongoDB version to be installed.
            displayName: Version
            path: version
            x-descriptors:
              - 'urn:alm:descriptor:com.tectonic.ui:label'
        statusDescriptors:
          - description: The status of each of the pods for the MongoDB cluster.
            displayName: Pod Status
            path: pods
            x-descriptors:
              - 'urn:alm:descriptor:com.tectonic.ui:podStatuses'
        version: v1
        description: >-
          MongoDB Deployment consisting of only one host. No replication of
          data.

5.7.8.2. Required CRDs

Relying on other required CRDs is completely optional and only exists to reduce the scope of individual Operators and provide a way to compose multiple Operators together to solve an end-to-end use case.

An example of this is an Operator that might set up an application and install an etcd cluster (from an etcd Operator) to use for distributed locking and a Postgres database (from a Postgres Operator) for data storage.

Operator Lifecycle Manager (OLM) checks against the available CRDs and Operators in the cluster to fulfill these requirements. If suitable versions are found, the Operators are started within the desired namespace and a service account created for each Operator to create, watch, and modify the Kubernetes resources required.

Table 5.13. Required CRD fields

FieldDescriptionRequired/optional

Name

The full name of the CRD you require.

Required

Version

The version of that object API.

Required

Kind

The Kubernetes object kind.

Required

DisplayName

A human readable version of the CRD.

Required

Description

A summary of how the component fits in your larger architecture.

Required

Example required CRD

    required:
    - name: etcdclusters.etcd.database.coreos.com
      version: v1beta2
      kind: EtcdCluster
      displayName: etcd Cluster
      description: Represents a cluster of etcd nodes.

5.7.8.3. CRD upgrades

OLM upgrades a custom resource definition (CRD) immediately if it is owned by a singular cluster service version (CSV). If a CRD is owned by multiple CSVs, then the CRD is upgraded when it has satisfied all of the following backward compatible conditions:

  • All existing serving versions in the current CRD are present in the new CRD.
  • All existing instances, or custom resources, that are associated with the serving versions of the CRD are valid when validated against the validation schema of the new CRD.
5.7.8.3.1. Adding a new CRD version

Procedure

To add a new version of a CRD to your Operator:

  1. Add a new entry in the CRD resource under the versions section of your CSV.

    For example, if the current CRD has a version v1alpha1 and you want to add a new version v1beta1 and mark it as the new storage version, add a new entry for v1beta1:

    versions:
      - name: v1alpha1
        served: true
        storage: false
      - name: v1beta1 1
        served: true
        storage: true
    1
    New entry.
  2. Ensure the referencing version of the CRD in the owned section of your CSV is updated if the CSV intends to use the new version:

    customresourcedefinitions:
      owned:
      - name: cluster.example.com
        version: v1beta1 1
        kind: cluster
        displayName: Cluster
    1
    Update the version.
  3. Push the updated CRD and CSV to your bundle.
5.7.8.3.2. Deprecating or removing a CRD version

Operator Lifecycle Manager (OLM) does not allow a serving version of a custom resource definition (CRD) to be removed right away. Instead, a deprecated version of the CRD must be first disabled by setting the served field in the CRD to false. Then, the non-serving version can be removed on the subsequent CRD upgrade.

Procedure

To deprecate and remove a specific version of a CRD:

  1. Mark the deprecated version as non-serving to indicate this version is no longer in use and may be removed in a subsequent upgrade. For example:

    versions:
      - name: v1alpha1
        served: false 1
        storage: true
    1
    Set to false.
  2. Switch the storage version to a serving version if the version to be deprecated is currently the storage version. For example:

    versions:
      - name: v1alpha1
        served: false
        storage: false 1
      - name: v1beta1
        served: true
        storage: true 2
    1 2
    Update the storage fields accordingly.
    Note

    To remove a specific version that is or was the storage version from a CRD, that version must be removed from the storedVersion in the status of the CRD. OLM will attempt to do this for you if it detects a stored version no longer exists in the new CRD.

  3. Upgrade the CRD with the above changes.
  4. In subsequent upgrade cycles, the non-serving version can be removed completely from the CRD. For example:

    versions:
      - name: v1beta1
        served: true
        storage: true
  5. Ensure the referencing CRD version in the owned section of your CSV is updated accordingly if that version is removed from the CRD.

5.7.8.4. CRD templates

Users of your Operator must be made aware of which options are required versus optional. You can provide templates for each of your custom resource definitions (CRDs) with a minimum set of configuration as an annotation named alm-examples. Compatible UIs will pre-fill this template for users to further customize.

The annotation consists of a list of the kind, for example, the CRD name and the corresponding metadata and spec of the Kubernetes object.

The following full example provides templates for EtcdCluster, EtcdBackup and EtcdRestore:

metadata:
  annotations:
    alm-examples: >-
      [{"apiVersion":"etcd.database.coreos.com/v1beta2","kind":"EtcdCluster","metadata":{"name":"example","namespace":"default"},"spec":{"size":3,"version":"3.2.13"}},{"apiVersion":"etcd.database.coreos.com/v1beta2","kind":"EtcdRestore","metadata":{"name":"example-etcd-cluster"},"spec":{"etcdCluster":{"name":"example-etcd-cluster"},"backupStorageType":"S3","s3":{"path":"<full-s3-path>","awsSecret":"<aws-secret>"}}},{"apiVersion":"etcd.database.coreos.com/v1beta2","kind":"EtcdBackup","metadata":{"name":"example-etcd-cluster-backup"},"spec":{"etcdEndpoints":["<etcd-cluster-endpoints>"],"storageType":"S3","s3":{"path":"<full-s3-path>","awsSecret":"<aws-secret>"}}}]

5.7.8.5. Hiding internal objects

It is common practice for Operators to use custom resource definitions (CRDs) internally to accomplish a task. These objects are not meant for users to manipulate and can be confusing to users of the Operator. For example, a database Operator might have a Replication CRD that is created whenever a user creates a Database object with replication: true.

As an Operator author, you can hide any CRDs in the user interface that are not meant for user manipulation by adding the operators.operatorframework.io/internal-objects annotation to the cluster service version (CSV) of your Operator.

Procedure

  1. Before marking one of your CRDs as internal, ensure that any debugging information or configuration that might be required to manage the application is reflected on the status or spec block of your CR, if applicable to your Operator.
  2. Add the operators.operatorframework.io/internal-objects annotation to the CSV of your Operator to specify any internal objects to hide in the user interface:

    Internal object annotation

    apiVersion: operators.coreos.com/v1alpha1
    kind: ClusterServiceVersion
    metadata:
      name: my-operator-v1.2.3
      annotations:
        operators.operatorframework.io/internal-objects: '["my.internal.crd1.io","my.internal.crd2.io"]' 1
    ...

    1
    Set any internal CRDs as an array of strings.

5.7.8.6. Initializing required custom resources

An Operator might require the user to instantiate a custom resource before the Operator can be fully functional. However, it can be challenging for a user to determine what is required or how to define the resource.

As an Operator developer, you can specify a single required custom resource by adding operatorframework.io/initialization-resource to the cluster service version (CSV) during Operator installation. You are then prompted prompted to create the custom resource through a template that is provided in the CSV. The annotation must include a template that contains a complete YAML definition that is required to initialize the resource during installation.

If this annotation is defined, after installing the Operator from the OpenShift Container Platform web console, the user is prompted to create the resource using the template provided in the CSV.

Procedure

  • Add the operatorframework.io/initialization-resource annotation to the CSV of your Operator to specify a required custom resource. For example, the following annotation requires the creation of a StorageCluster resource and provides a full YAML definition:

    Initialization resource annotation

    apiVersion: operators.coreos.com/v1alpha1
    kind: ClusterServiceVersion
    metadata:
      name: my-operator-v1.2.3
      annotations:
        operatorframework.io/initialization-resource: |-
            {
                "apiVersion": "ocs.openshift.io/v1",
                "kind": "StorageCluster",
                "metadata": {
                    "name": "example-storagecluster"
                },
                "spec": {
                    "manageNodes": false,
                    "monPVCTemplate": {
                        "spec": {
                            "accessModes": [
                                "ReadWriteOnce"
                            ],
                            "resources": {
                                "requests": {
                                    "storage": "10Gi"
                                }
                            },
                            "storageClassName": "gp2"
                        }
                    },
                    "storageDeviceSets": [
                        {
                            "count": 3,
                            "dataPVCTemplate": {
                                "spec": {
                                    "accessModes": [
                                        "ReadWriteOnce"
                                    ],
                                    "resources": {
                                        "requests": {
                                            "storage": "1Ti"
                                        }
                                    },
                                    "storageClassName": "gp2",
                                    "volumeMode": "Block"
                                }
                            },
                            "name": "example-deviceset",
                            "placement": {},
                            "portable": true,
                            "resources": {}
                        }
                    ]
                }
            }
    ...

5.7.9. Understanding your API services

As with CRDs, there are two types of API services that your Operator may use: owned and required.

5.7.9.1. Owned API services

When a CSV owns an API service, it is responsible for describing the deployment of the extension api-server that backs it and the group/version/kind (GVK) it provides.

An API service is uniquely identified by the group/version it provides and can be listed multiple times to denote the different kinds it is expected to provide.

Table 5.14. Owned API service fields

FieldDescriptionRequired/optional

Group

Group that the API service provides, for example database.example.com.

Required

Version

Version of the API service, for example v1alpha1.

Required

Kind

A kind that the API service is expected to provide.

Required

Name

The plural name for the API service provided.

Required

DeploymentName

Name of the deployment defined by your CSV that corresponds to your API service (required for owned API services). During the CSV pending phase, the OLM Operator searches the InstallStrategy of your CSV for a Deployment spec with a matching name, and if not found, does not transition the CSV to the "Install Ready" phase.

Required

DisplayName

A human readable version of your API service name, for example MongoDB Standalone.

Required

Description

A short description of how this API service is used by the Operator or a description of the functionality provided by the API service.

Required

Resources

Your API services own one or more types of Kubernetes objects. These are listed in the resources section to inform your users of the objects they might need to troubleshoot or how to connect to the application, such as the service or ingress rule that exposes a database.

It is recommended to only list out the objects that are important to a human, not an exhaustive list of everything you orchestrate. For example, do not list config maps that store internal state that are not meant to be modified by a user.

Optional

SpecDescriptors, StatusDescriptors, and ActionDescriptors

Essentially the same as for owned CRDs.

Optional

5.7.9.1.1. API service resource creation

Operator Lifecycle Manager (OLM) is responsible for creating or replacing the service and API service resources for each unique owned API service:

  • Service pod selectors are copied from the CSV deployment matching the DeploymentName field of the API service description.
  • A new CA key/certificate pair is generated for each installation and the base64-encoded CA bundle is embedded in the respective API service resource.
5.7.9.1.2. API service serving certificates

OLM handles generating a serving key/certificate pair whenever an owned API service is being installed. The serving certificate has a common name (CN) containing the hostname of the generated Service resource and is signed by the private key of the CA bundle embedded in the corresponding API service resource.

The certificate is stored as a type kubernetes.io/tls secret in the deployment namespace, and a volume named apiservice-cert is automatically appended to the volumes section of the deployment in the CSV matching the DeploymentName field of the API service description.

If one does not already exist, a volume mount with a matching name is also appended to all containers of that deployment. This allows users to define a volume mount with the expected name to accommodate any custom path requirements. The path of the generated volume mount defaults to /apiserver.local.config/certificates and any existing volume mounts with the same path are replaced.

5.7.9.2. Required API services

OLM ensures all required CSVs have an API service that is available and all expected GVKs are discoverable before attempting installation. This allows a CSV to rely on specific kinds provided by API services it does not own.

Table 5.15. Required API service fields

FieldDescriptionRequired/optional

Group

Group that the API service provides, for example database.example.com.

Required

Version

Version of the API service, for example v1alpha1.

Required

Kind

A kind that the API service is expected to provide.

Required

DisplayName

A human readable version of your API service name, for example MongoDB Standalone.

Required

Description

A short description of how this API service is used by the Operator or a description of the functionality provided by the API service.

Required

5.8. Working with bundle images

You can use the Operator SDK to package, deploy, and upgrade Operators in the bundle format for use on Operator Lifecycle Manager (OLM).

5.8.1. Bundling an Operator

The Operator bundle format is the default packaging method for Operator SDK and Operator Lifecycle Manager (OLM). You can get your Operator ready for use on OLM by using the Operator SDK to build and push your Operator project as a bundle image.

Prerequisites

  • Operator SDK CLI installed on a development workstation
  • OpenShift CLI (oc) v4.8+ installed
  • Operator project initialized by using the Operator SDK
  • If your Operator is Go-based, your project must be updated to use supported images for running on OpenShift Container Platform

Procedure

  1. Run the following make commands in your Operator project directory to build and push your Operator image. Modify the IMG argument in the following steps to reference a repository that you have access to. You can obtain an account for storing containers at repository sites such as Quay.io.

    1. Build the image:

      $ make docker-build IMG=<registry>/<user>/<operator_image_name>:<tag>
      Note

      The Dockerfile generated by the SDK for the Operator explicitly references GOARCH=amd64 for go build. This can be amended to GOARCH=$TARGETARCH for non-AMD64 architectures. Docker will automatically set the environment variable to the value specified by –platform. With Buildah, the –build-arg will need to be used for the purpose. For more information, see Multiple Architectures.

    2. Push the image to a repository:

      $ make docker-push IMG=<registry>/<user>/<operator_image_name>:<tag>
  2. Create your Operator bundle manifest by running the make bundle command, which invokes several commands, including the Operator SDK generate bundle and bundle validate subcommands:

    $ make bundle IMG=<registry>/<user>/<operator_image_name>:<tag>

    Bundle manifests for an Operator describe how to display, create, and manage an application. The make bundle command creates the following files and directories in your Operator project:

    • A bundle manifests directory named bundle/manifests that contains a ClusterServiceVersion object
    • A bundle metadata directory named bundle/metadata
    • All custom resource definitions (CRDs) in a config/crd directory
    • A Dockerfile bundle.Dockerfile

    These files are then automatically validated by using operator-sdk bundle validate to ensure the on-disk bundle representation is correct.

  3. Build and push your bundle image by running the following commands. OLM consumes Operator bundles using an index image, which reference one or more bundle images.

    1. Build the bundle image. Set BUNDLE_IMG with the details for the registry, user namespace, and image tag where you intend to push the image:

      $ make bundle-build BUNDLE_IMG=<registry>/<user>/<bundle_image_name>:<tag>
    2. Push the bundle image:

      $ docker push <registry>/<user>/<bundle_image_name>:<tag>

5.8.2. Deploying an Operator with Operator Lifecycle Manager

Operator Lifecycle Manager (OLM) helps you to install, update, and manage the lifecycle of Operators and their associated services on a Kubernetes cluster. OLM is installed by default on OpenShift Container Platform and runs as a Kubernetes extension so that you can use the web console and the OpenShift CLI (oc) for all Operator lifecycle management functions without any additional tools.

The Operator bundle format is the default packaging method for Operator SDK and OLM. You can use the Operator SDK to quickly run a bundle image on OLM to ensure that it runs properly.

Prerequisites

  • Operator SDK CLI installed on a development workstation
  • Operator bundle image built and pushed to a registry
  • OLM installed on a Kubernetes-based cluster (v1.16.0 or later if you use apiextensions.k8s.io/v1 CRDs, for example OpenShift Container Platform 4.8)
  • Logged in to the cluster with oc using an account with cluster-admin permissions
  • If your Operator is Go-based, your project must be updated to use supported images for running on OpenShift Container Platform

Procedure

  1. Enter the following command to run the Operator on the cluster:

    $ operator-sdk run bundle \
        [-n <namespace>] \1
        <registry>/<user>/<bundle_image_name>:<tag>
    1
    By default, the command installs the Operator in the currently active project in your ~/.kube/config file. You can add the -n flag to set a different namespace scope for the installation.

    This command performs the following actions:

    • Create an index image referencing your bundle image. The index image is opaque and ephemeral, but accurately reflects how a bundle would be added to a catalog in production.
    • Create a catalog source that points to your new index image, which enables OperatorHub to discover your Operator.
    • Deploy your Operator to your cluster by creating an OperatorGroup, Subscription, InstallPlan, and all other required objects, including RBAC.

5.8.3. Publishing a catalog containing a bundled Operator

To install and manage Operators, Operator Lifecycle Manager (OLM) requires that Operator bundles are listed in an index image, which is referenced by a catalog on the cluster. As an Operator author, you can use the Operator SDK to create an index containing the bundle for your Operator and all of its dependencies. This is useful for testing on remote clusters and publishing to container registries.

Note

The Operator SDK uses the opm CLI to facilitate index image creation. Experience with the opm command is not required. For advanced use cases, the opm command can be used directly instead of the Operator SDK.

Prerequisites

  • Operator SDK CLI installed on a development workstation
  • Operator bundle image built and pushed to a registry
  • OLM installed on a Kubernetes-based cluster (v1.16.0 or later if you use apiextensions.k8s.io/v1 CRDs, for example OpenShift Container Platform 4.8)
  • Logged in to the cluster with oc using an account with cluster-admin permissions

Procedure

  1. Run the following make command in your Operator project directory to build an index image containing your Operator bundle:

    $ make catalog-build CATALOG_IMG=<registry>/<user>/<index_image_name>:<tag>

    where the CATALOG_IMG argument references a repository that you have access to. You can obtain an account for storing containers at repository sites such as Quay.io.

  2. Push the built index image to a repository:

    $ make catalog-push CATALOG_IMG=<registry>/<user>/<index_image_name>:<tag>
    Tip

    You can use Operator SDK make commands together if you would rather perform multiple actions in sequence at once. For example, if you had not yet built a bundle image for your Operator project, you can build and push both a bundle image and an index image with the following syntax:

    $ make bundle-build bundle-push catalog-build catalog-push \
        BUNDLE_IMG=<bundle_image_pull_spec> \
        CATALOG_IMG=<index_image_pull_spec>

    Alternatively, you can set the IMAGE_TAG_BASE field in your Makefile to an existing repository:

    IMAGE_TAG_BASE=quay.io/example/my-operator

    You can then use the following syntax to build and push images with automatically-generated names, such as quay.io/example/my-operator-bundle:v0.0.1 for the bundle image and quay.io/example/my-operator-catalog:v0.0.1 for the index image:

    $ make bundle-build bundle-push catalog-build catalog-push
  3. Define a CatalogSource object that references the index image you just generated, and then create the object by using the oc apply command or web console:

    Example CatalogSource YAML

    apiVersion: operators.coreos.com/v1alpha1
    kind: CatalogSource
    metadata:
      name: cs-memcached
      namespace: default
    spec:
      displayName: My Test
      publisher: Company
      sourceType: grpc
      image: quay.io/example/memcached-catalog:v0.0.1 1
      updateStrategy:
        registryPoll:
          interval: 10m

    1
    Set image to the image pull spec you used previously with the CATALOG_IMG argument.
  4. Check the catalog source:

    $ oc get catalogsource

    Example output

    NAME           DISPLAY     TYPE   PUBLISHER   AGE
    cs-memcached   My Test     grpc   Company     4h31m

Verification

  1. Install the Operator using your catalog:

    1. Define an OperatorGroup object and create it by using the oc apply command or web console:

      Example OperatorGroup YAML

      apiVersion: operators.coreos.com/v1
      kind: OperatorGroup
      metadata:
        name: my-test
        namespace: default
      spec:
        targetNamespaces:
        - default

    2. Define a Subscription object and create it by using the oc apply command or web console:

      Example Subscription YAML

      apiVersion: operators.coreos.com/v1alpha1
      kind: Subscription
      metadata:
        name: catalogtest
        namespace: default
      spec:
        channel: "alpha"
        installPlanApproval: Manual
        name: catalog
        source: cs-memcached
        sourceNamespace: default
        startingCSV: memcached-operator.v0.0.1

  2. Verify the installed Operator is running:

    1. Check the Operator group:

      $ oc get og

      Example output

      NAME             AGE
      my-test           4h40m

    2. Check the cluster service version (CSV):

      $ oc get csv

      Example output

      NAME                        DISPLAY   VERSION   REPLACES   PHASE
      memcached-operator.v0.0.1   Test      0.0.1                Succeeded

    3. Check the pods for the Operator:

      $ oc get pods

      Example output

      NAME                                                              READY   STATUS      RESTARTS   AGE
      9098d908802769fbde8bd45255e69710a9f8420a8f3d814abe88b68f8ervdj6   0/1     Completed   0          4h33m
      catalog-controller-manager-7fd5b7b987-69s4n                       2/2     Running     0          4h32m
      cs-memcached-7622r                                                1/1     Running     0          4h33m

Additional resources

5.8.4. Testing an Operator upgrade on Operator Lifecycle Manager

You can quickly test upgrading your Operator by using Operator Lifecycle Manager (OLM) integration in the Operator SDK, without requiring you to manually manage index images and catalog sources.

The run bundle-upgrade subcommand automates triggering an installed Operator to upgrade to a later version by specifying a bundle image for the later version.

Prerequisites

  • Operator installed with OLM either by using the run bundle subcommand or with traditional OLM installation
  • A bundle image that represents a later version of the installed Operator

Procedure

  1. If your Operator has not already been installed with OLM, install the earlier version either by using the run bundle subcommand or with traditional OLM installation.

    Note

    If the earlier version of the bundle was installed traditionally using OLM, the newer bundle that you intend to upgrade to must not exist in the index image referenced by the catalog source. Otherwise, running the run bundle-upgrade subcommand will cause the registry pod to fail because the newer bundle is already referenced by the index that provides the package and cluster service version (CSV).

    For example, you can use the following run bundle subcommand for a Memcached Operator by specifying the earlier bundle image:

    $ operator-sdk run bundle <registry>/<user>/memcached-operator:v0.0.1

    Example output

    INFO[0009] Successfully created registry pod: quay-io-demo-memcached-operator-v0-0-1
    INFO[0009] Created CatalogSource: memcached-operator-catalog
    INFO[0010] OperatorGroup "operator-sdk-og" created
    INFO[0010] Created Subscription: memcached-operator-v0-0-1-sub
    INFO[0013] Approved InstallPlan install-bqggr for the Subscription: memcached-operator-v0-0-1-sub
    INFO[0013] Waiting for ClusterServiceVersion "my-project/memcached-operator.v0.0.1" to reach 'Succeeded' phase
    INFO[0013]   Waiting for ClusterServiceVersion "my-project/memcached-operator.v0.0.1" to appear
    INFO[0019]   Found ClusterServiceVersion "my-project/memcached-operator.v0.0.1" phase: Succeeded

  2. Upgrade the installed Operator by specifying the bundle image for the later Operator version:

    $ operator-sdk run bundle-upgrade <registry>/<user>/memcached-operator:v0.0.2

    Example output

    INFO[0002] Found existing subscription with name memcached-operator-v0-0-1-sub and namespace my-project
    INFO[0002] Found existing catalog source with name memcached-operator-catalog and namespace my-project
    INFO[0009] Successfully created registry pod: quay-io-demo-memcached-operator-v0-0-2
    INFO[0009] Updated catalog source memcached-operator-catalog with address and annotations
    INFO[0010] Deleted previous registry pod with name "quay-io-demo-memcached-operator-v0-0-1"
    INFO[0041] Approved InstallPlan install-gvcjh for the Subscription: memcached-operator-v0-0-1-sub
    INFO[0042] Waiting for ClusterServiceVersion "my-project/memcached-operator.v0.0.2" to reach 'Succeeded' phase
    INFO[0042]   Found ClusterServiceVersion "my-project/memcached-operator.v0.0.2" phase: InstallReady
    INFO[0043]   Found ClusterServiceVersion "my-project/memcached-operator.v0.0.2" phase: Installing
    INFO[0044]   Found ClusterServiceVersion "my-project/memcached-operator.v0.0.2" phase: Succeeded
    INFO[0044] Successfully upgraded to "memcached-operator.v0.0.2"

  3. Clean up the installed Operators:

    $ operator-sdk cleanup memcached-operator

5.8.5. Controlling Operator compatibility with OpenShift Container Platform versions

Important

Kubernetes periodically deprecates certain APIs that are removed in subsequent releases. If your Operator is using a deprecated API, it might no longer work after the OpenShift Container Platform cluster is upgraded to the Kubernetes version where the API has been removed.

As an Operator author, it is strongly recommended that you review the Deprecated API Migration Guide in Kubernetes documentation and keep your Operator projects up to date to avoid using deprecated and removed APIs. Ideally, you should update your Operator before the release of a future version of OpenShift Container Platform that would make the Operator incompatible.

When an API is removed from an OpenShift Container Platform version, Operators running on that cluster version that are still using removed APIs will no longer work properly. As an Operator author, you should plan to update your Operator projects to accommodate API deprecation and removal to avoid interruptions for users of your Operator.

Tip

You can check the event alerts of your Operators running on OpenShift Container Platform 4.8 and later to find whether there are any warnings about APIs currently in use. The following alerts fire when they detect an API in use that will be removed in the next release:

APIRemovedInNextReleaseInUse
APIs that will be removed in the next OpenShift Container Platform release.
APIRemovedInNextEUSReleaseInUse
APIs that will be removed in the next OpenShift Container Platform Extended Update Support (EUS) release.

If a cluster administrator has installed your Operator, before they upgrade to the next version of OpenShift Container Platform, they must ensure a version of your Operator is installed that is compatible with that next cluster version. While it is recommended that you update your Operator projects to no longer use deprecated or removed APIs, if you still need to publish your Operator bundles with removed APIs for continued use on earlier versions of OpenShift Container Platform, ensure that the bundle is configured accordingly.

The following procedure helps prevent administrators from installing versions of your Operator on an incompatible version of OpenShift Container Platform. These steps also prevent administrators from upgrading to a newer version of OpenShift Container Platform that is incompatible with the version of your Operator that is currently installed on their cluster.

This procedure is also useful when you know that the current version of your Operator will not work well, for any reason, on a specific OpenShift Container Platform version. By defining the cluster versions where the Operator should be distributed, you ensure that the Operator does not appear in a catalog of a cluster version which is outside of the allowed range.

Important

Operators that use deprecated APIs can adversely impact critical workloads when cluster administrators upgrade to a future version of OpenShift Container Platform where the API is no longer supported. If your Operator is using deprecated APIs, you should configure the following settings in your Operator project as soon as possible.

Prerequisites

  • An existing Operator project

Procedure

  1. If you know that a specific bundle of your Operator is not supported and will not work correctly on OpenShift Container Platform later than a certain cluster version, configure the maximum version of OpenShift Container Platform that your Operator is compatible with. In your Operator project’s cluster service version (CSV), set the olm.maxOpenShiftVersion annotation to prevent administrators from upgrading their cluster before upgrading the installed Operator to a compatible version:

    Important

    You must use olm.maxOpenShiftVersion annotation only if your Operator bundle version cannot work in later versions. Be aware that cluster admins cannot upgrade their clusters with your solution installed. If you do not provide later version and a valid upgrade path, cluster admins may uninstall your Operator and can upgrade the cluster version.

    Example CSV with olm.maxOpenShiftVersion annotation

    apiVersion: operators.coreos.com/v1alpha1
    kind: ClusterServiceVersion
    metadata:
      annotations:
        "olm.properties": '[{"type": "olm.maxOpenShiftVersion", "value": "<cluster_version>"}]' 1

    1
    Specify the maximum cluster version of OpenShift Container Platform that your Operator is compatible with. For example, setting value to 4.8 prevents cluster upgrades to OpenShift Container Platform versions later than 4.8 when this bundle is installed on a cluster.
  2. If your bundle is intended for distribution in a Red Hat-provided Operator catalog, configure the compatible versions of OpenShift Container Platform for your Operator by setting the following properties. This configuration ensures your Operator is only included in catalogs that target compatible versions of OpenShift Container Platform:

    Note

    This step is only valid when publishing Operators in Red Hat-provided catalogs. If your bundle is only intended for distribution in a custom catalog, you can skip this step. For more details, see "Red Hat-provided Operator catalogs".

    1. Set the com.redhat.openshift.versions annotation in your project’s bundle/metadata/annotations.yaml file:

      Example bundle/metadata/annotations.yaml file with compatible versions

      com.redhat.openshift.versions: "v4.6-v4.8" 1

      1
      Set to a range or single version.
    2. To prevent your bundle from being carried on to an incompatible version of OpenShift Container Platform, ensure that the index image is generated with the proper com.redhat.openshift.versions label in your Operator’s bundle image. For example, if your project was generated using the Operator SDK, update the bundle.Dockerfile file:

      Example bundle.Dockerfile with compatible versions

      LABEL com.redhat.openshift.versions="<versions>" 1

      1
      Set to a range or single version, for example, v4.6-v4.8. This setting defines the cluster versions where the Operator should be distributed, and the Operator does not appear in a catalog of a cluster version which is outside of the range.

You can now bundle a new version of your Operator and publish the updated version to a catalog for distribution.

Additional resources

5.8.6. Additional resources

5.9. Validating Operators using the scorecard tool

As an Operator author, you can use the scorecard tool in the Operator SDK to do the following tasks:

  • Validate that your Operator project is free of syntax errors and packaged correctly
  • Review suggestions about ways you can improve your Operator

5.9.1. About the scorecard tool

While the Operator SDK bundle validate subcommand can validate local bundle directories and remote bundle images for content and structure, you can use the scorecard command to run tests on your Operator based on a configuration file and test images. These tests are implemented within test images that are configured and constructed to be executed by the scorecard.

The scorecard assumes it is run with access to a configured Kubernetes cluster, such as OpenShift Container Platform. The scorecard runs each test within a pod, from which pod logs are aggregated and test results are sent to the console. The scorecard has built-in basic and Operator Lifecycle Manager (OLM) tests and also provides a means to execute custom test definitions.

Scorecard workflow

  1. Create all resources required by any related custom resources (CRs) and the Operator
  2. Create a proxy container in the deployment of the Operator to record calls to the API server and run tests
  3. Examine parameters in the CRs

The scorecard tests make no assumptions as to the state of the Operator being tested. Creating Operators and CRs for an Operators are beyond the scope of the scorecard itself. Scorecard tests can, however, create whatever resources they require if the tests are designed for resource creation.

scorecard command syntax

$ operator-sdk scorecard <bundle_dir_or_image> [flags]

The scorecard requires a positional argument for either the on-disk path to your Operator bundle or the name of a bundle image.

For further information about the flags, run:

$ operator-sdk scorecard -h

5.9.2. Scorecard configuration

The scorecard tool uses a configuration that allows you to configure internal plugins, as well as several global configuration options. Tests are driven by a configuration file named config.yaml, which is generated by the make bundle command, located in your bundle/ directory:

./bundle
...
└── tests
    └── scorecard
        └── config.yaml

Example scorecard configuration file

kind: Configuration
apiversion: scorecard.operatorframework.io/v1alpha3
metadata:
  name: config
stages:
- parallel: true
  tests:
  - image: quay.io/operator-framework/scorecard-test:v1.8.0
    entrypoint:
    - scorecard-test
    - basic-check-spec
    labels:
      suite: basic
      test: basic-check-spec-test
  - image: quay.io/operator-framework/scorecard-test:v1.8.0
    entrypoint:
    - scorecard-test
    - olm-bundle-validation
    labels:
      suite: olm
      test: olm-bundle-validation-test

The configuration file defines each test that scorecard can execute. The following fields of the scorecard configuration file define the test as follows:

Configuration fieldDescription

image

Test container image name that implements a test

entrypoint

Command and arguments that are invoked in the test image to execute a test

labels

Scorecard-defined or custom labels that select which tests to run

5.9.3. Built-in scorecard tests

The scorecard ships with pre-defined tests that are arranged into suites: the basic test suite and the Operator Lifecycle Manager (OLM) suite.

Table 5.16. Basic test suite

TestDescriptionShort name

Spec Block Exists

This test checks the custom resource (CR) created in the cluster to make sure that all CRs have a spec block.

basic-check-spec-test

Table 5.17. OLM test suite

TestDescriptionShort name

Bundle Validation

This test validates the bundle manifests found in the bundle that is passed into scorecard. If the bundle contents contain errors, then the test result output includes the validator log as well as error messages from the validation library.

olm-bundle-validation-test

Provided APIs Have Validation

This test verifies that the custom resource definitions (CRDs) for the provided CRs contain a validation section and that there is validation for each spec and status field detected in the CR.

olm-crds-have-validation-test

Owned CRDs Have Resources Listed

This test makes sure that the CRDs for each CR provided via the cr-manifest option have a resources subsection in the owned CRDs section of the ClusterServiceVersion (CSV). If the test detects used resources that are not listed in the resources section, it lists them in the suggestions at the end of the test. Users are required to fill out the resources section after initial code generation for this test to pass.

olm-crds-have-resources-test

Spec Fields With Descriptors

This test verifies that every field in the CRs spec sections has a corresponding descriptor listed in the CSV.

olm-spec-descriptors-test

Status Fields With Descriptors

This test verifies that every field in the CRs status sections have a corresponding descriptor listed in the CSV.

olm-status-descriptors-test

5.9.4. Running the scorecard tool

A default set of Kustomize files are generated by the Operator SDK after running the init command. The default bundle/tests/scorecard/config.yaml file that is generated can be immediately used to run the scorecard tool against your Operator, or you can modify this file to your test specifications.

Prerequisites

  • Operator project generated by using the Operator SDK

Procedure

  1. Generate or regenerate your bundle manifests and metadata for your Operator:

    $ make bundle

    This command automatically adds scorecard annotations to your bundle metadata, which is used by the scorecard command to run tests.

  2. Run the scorecard against the on-disk path to your Operator bundle or the name of a bundle image:

    $ operator-sdk scorecard <bundle_dir_or_image>

5.9.5. Scorecard output

The --output flag for the scorecard command specifies the scorecard results output format: either text or json.

Example 5.29. Example JSON output snippet

{
  "apiVersion": "scorecard.operatorframework.io/v1alpha3",
  "kind": "TestList",
  "items": [
    {
      "kind": "Test",
      "apiVersion": "scorecard.operatorframework.io/v1alpha3",
      "spec": {
        "image": "quay.io/operator-framework/scorecard-test:v1.8.0",
        "entrypoint": [
          "scorecard-test",
          "olm-bundle-validation"
        ],
        "labels": {
          "suite": "olm",
          "test": "olm-bundle-validation-test"
        }
      },
      "status": {
        "results": [
          {
            "name": "olm-bundle-validation",
            "log": "time=\"2020-06-10T19:02:49Z\" level=debug msg=\"Found manifests directory\" name=bundle-test\ntime=\"2020-06-10T19:02:49Z\" level=debug msg=\"Found metadata directory\" name=bundle-test\ntime=\"2020-06-10T19:02:49Z\" level=debug msg=\"Getting mediaType info from manifests directory\" name=bundle-test\ntime=\"2020-06-10T19:02:49Z\" level=info msg=\"Found annotations file\" name=bundle-test\ntime=\"2020-06-10T19:02:49Z\" level=info msg=\"Could not find optional dependencies file\" name=bundle-test\n",
            "state": "pass"
          }
        ]
      }
    }
  ]
}

Example 5.30. Example text output snippet

--------------------------------------------------------------------------------
Image:      quay.io/operator-framework/scorecard-test:v1.8.0
Entrypoint: [scorecard-test olm-bundle-validation]
Labels:
	"suite":"olm"
	"test":"olm-bundle-validation-test"
Results:
	Name: olm-bundle-validation
	State: pass
	Log:
		time="2020-07-15T03:19:02Z" level=debug msg="Found manifests directory" name=bundle-test
		time="2020-07-15T03:19:02Z" level=debug msg="Found metadata directory" name=bundle-test
		time="2020-07-15T03:19:02Z" level=debug msg="Getting mediaType info from manifests directory" name=bundle-test
		time="2020-07-15T03:19:02Z" level=info msg="Found annotations file" name=bundle-test
		time="2020-07-15T03:19:02Z" level=info msg="Could not find optional dependencies file" name=bundle-test
Note

The output format spec matches the Test type layout.

5.9.6. Selecting tests

Scorecard tests are selected by setting the --selector CLI flag to a set of label strings. If a selector flag is not supplied, then all the tests within the scorecard configuration file are run.

Tests are run serially with test results being aggregated by the scorecard and written to standard output, or stdout.

Procedure

  1. To select a single test, for example basic-check-spec-test, specify the test by using the --selector flag:

    $ operator-sdk scorecard <bundle_dir_or_image> \
        -o text \
        --selector=test=basic-check-spec-test
  2. To select a suite of tests, for example olm, specify a label that is used by all of the OLM tests:

    $ operator-sdk scorecard <bundle_dir_or_image> \
        -o text \
        --selector=suite=olm
  3. To select multiple tests, specify the test names by using the selector flag using the following syntax:

    $ operator-sdk scorecard <bundle_dir_or_image> \
        -o text \
        --selector='test in (basic-check-spec-test,olm-bundle-validation-test)'

5.9.7. Enabling parallel testing

As an Operator author, you can define separate stages for your tests using the scorecard configuration file. Stages run sequentially in the order they are defined in the configuration file. A stage contains a list of tests and a configurable parallel setting.

By default, or when a stage explicitly sets parallel to false, tests in a stage are run sequentially in the order they are defined in the configuration file. Running tests one at a time is helpful to guarantee that no two tests interact and conflict with each other.

However, if tests are designed to be fully isolated, they can be parallelized.

Procedure

  • To run a set of isolated tests in parallel, include them in the same stage and set parallel to true:

    apiVersion: scorecard.operatorframework.io/v1alpha3
    kind: Configuration
    metadata:
      name: config
    stages:
    - parallel: true 1
      tests:
      - entrypoint:
        - scorecard-test
        - basic-check-spec
        image: quay.io/operator-framework/scorecard-test:v1.8.0
        labels:
          suite: basic
          test: basic-check-spec-test
      - entrypoint:
        - scorecard-test
        - olm-bundle-validation
        image: quay.io/operator-framework/scorecard-test:v1.8.0
        labels:
          suite: olm
          test: olm-bundle-validation-test
    1
    Enables parallel testing

    All tests in a parallel stage are executed simultaneously, and scorecard waits for all of them to finish before proceding to the next stage. This can make your tests run much faster.

5.9.8. Custom scorecard tests

The scorecard tool can run custom tests that follow these mandated conventions:

  • Tests are implemented within a container image
  • Tests accept an entrypoint which include a command and arguments
  • Tests produce v1alpha3 scorecard output in JSON format with no extraneous logging in the test output
  • Tests can obtain the bundle contents at a shared mount point of /bundle
  • Tests can access the Kubernetes API using an in-cluster client connection

Writing custom tests in other programming languages is possible if the test image follows the above guidelines.

The following example shows of a custom test image written in Go:

Example 5.31. Example custom scorecard test

// Copyright 2020 The Operator-SDK Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

package main

import (
	"encoding/json"
	"fmt"
	"log"
	"os"

	scapiv1alpha3 "github.com/operator-framework/api/pkg/apis/scorecard/v1alpha3"
	apimanifests "github.com/operator-framework/api/pkg/manifests"
)

// This is the custom scorecard test example binary
// As with the Redhat scorecard test image, the bundle that is under
// test is expected to be mounted so that tests can inspect the
// bundle contents as part of their test implementations.
// The actual test is to be run is named and that name is passed
// as an argument to this binary.  This argument mechanism allows
// this binary to run various tests all from within a single
// test image.

const PodBundleRoot = "/bundle"

func main() {
	entrypoint := os.Args[1:]
	if len(entrypoint) == 0 {
		log.Fatal("Test name argument is required")
	}

	// Read the pod's untar'd bundle from a well-known path.
	cfg, err := apimanifests.GetBundleFromDir(PodBundleRoot)
	if err != nil {
		log.Fatal(err.Error())
	}

	var result scapiv1alpha3.TestStatus

	// Names of the custom tests which would be passed in the
	// `operator-sdk` command.
	switch entrypoint[0] {
	case CustomTest1Name:
		result = CustomTest1(cfg)
	case CustomTest2Name:
		result = CustomTest2(cfg)
	default:
		result = printValidTests()
	}

	// Convert scapiv1alpha3.TestResult to json.
	prettyJSON, err := json.MarshalIndent(result, "", "    ")
	if err != nil {
		log.Fatal("Failed to generate json", err)
	}
	fmt.Printf("%s\n", string(prettyJSON))

}

// printValidTests will print out full list of test names to give a hint to the end user on what the valid tests are.
func printValidTests() scapiv1alpha3.TestStatus {
	result := scapiv1alpha3.TestResult{}
	result.State = scapiv1alpha3.FailState
	result.Errors = make([]string, 0)
	result.Suggestions = make([]string, 0)

	str := fmt.Sprintf("Valid tests for this image include: %s %s",
		CustomTest1Name,
		CustomTest2Name)
	result.Errors = append(result.Errors, str)
	return scapiv1alpha3.TestStatus{
		Results: []scapiv1alpha3.TestResult{result},
	}
}

const (
	CustomTest1Name = "customtest1"
	CustomTest2Name = "customtest2"
)

// Define any operator specific custom tests here.
// CustomTest1 and CustomTest2 are example test functions. Relevant operator specific
// test logic is to be implemented in similarly.

func CustomTest1(bundle *apimanifests.Bundle) scapiv1alpha3.TestStatus {
	r := scapiv1alpha3.TestResult{}
	r.Name = CustomTest1Name
	r.State = scapiv1alpha3.PassState
	r.Errors = make([]string, 0)
	r.Suggestions = make([]string, 0)
	almExamples := bundle.CSV.GetAnnotations()["alm-examples"]
	if almExamples == "" {
		fmt.Println("no alm-examples in the bundle CSV")
	}

	return wrapResult(r)
}

func CustomTest2(bundle *apimanifests.Bundle) scapiv1alpha3.TestStatus {
	r := scapiv1alpha3.TestResult{}
	r.Name = CustomTest2Name
	r.State = scapiv1alpha3.PassState
	r.Errors = make([]string, 0)
	r.Suggestions = make([]string, 0)
	almExamples := bundle.CSV.GetAnnotations()["alm-examples"]
	if almExamples == "" {
		fmt.Println("no alm-examples in the bundle CSV")
	}
	return wrapResult(r)
}

func wrapResult(r scapiv1alpha3.TestResult) scapiv1alpha3.TestStatus {
	return scapiv1alpha3.TestStatus{
		Results: []scapiv1alpha3.TestResult{r},
	}
}

5.10. Configuring built-in monitoring with Prometheus

This guide describes the built-in monitoring support provided by the Operator SDK using the Prometheus Operator and details usage for Operator authors.

5.10.1. Prometheus Operator support

Prometheus is an open-source systems monitoring and alerting toolkit. The Prometheus Operator creates, configures, and manages Prometheus clusters running on Kubernetes-based clusters, such as OpenShift Container Platform.

Helper functions exist in the Operator SDK by default to automatically set up metrics in any generated Go-based Operator for use on clusters where the Prometheus Operator is deployed.

5.10.2. Metrics helper

In Go-based Operators generated using the Operator SDK, the following function exposes general metrics about the running program:

func ExposeMetricsPort(ctx context.Context, port int32) (*v1.Service, error)

These metrics are inherited from the controller-runtime library API. By default, the metrics are served on 0.0.0.0:8383/metrics.

A Service object is created with the metrics port exposed, which can be then accessed by Prometheus. The Service object is garbage collected when the leader pod’s root owner is deleted.

The following example is present in the cmd/manager/main.go file in all Operators generated using the Operator SDK:

import(
    "github.com/operator-framework/operator-sdk/pkg/metrics"
    "machine.openshift.io/controller-runtime/pkg/manager"
)

var (
    // Change the below variables to serve metrics on a different host or port.
    metricsHost       = "0.0.0.0" 1
    metricsPort int32 = 8383 2
)
...
func main() {
    ...
    // Pass metrics address to controller-runtime manager
    mgr, err := manager.New(cfg, manager.Options{
        Namespace:          namespace,
        MetricsBindAddress: fmt.Sprintf("%s:%d", metricsHost, metricsPort),
    })

    ...
    // Create Service object to expose the metrics port.
    _, err = metrics.ExposeMetricsPort(ctx, metricsPort)
    if err != nil {
        // handle error
        log.Info(err.Error())
    }
    ...
}
1
The host that the metrics are exposed on.
2
The port that the metrics are exposed on.

5.10.2.1. Modifying the metrics port

Operator authors can modify the port that metrics are exposed on.

Prerequisites

  • Go-based Operator generated using the Operator SDK
  • Kubernetes-based cluster with the Prometheus Operator deployed

Procedure

  • In the cmd/manager/main.go file of the generated Operator, change the value of metricsPort in the following line:

    var metricsPort int32 = 8383

5.10.3. Service monitors

A ServiceMonitor is a custom resource provided by the Prometheus Operator that discovers the Endpoints in Service objects and configures Prometheus to monitor those pods.

In Go-based Operators generated using the Operator SDK, the GenerateServiceMonitor() helper function can take a Service object and generate a ServiceMonitor object based on it.

Additional resources

5.10.3.1. Creating service monitors

Operator authors can add service target discovery of created monitoring services using the metrics.CreateServiceMonitor() helper function, which accepts the newly created service.

Prerequisites

  • Go-based Operator generated using the Operator SDK
  • Kubernetes-based cluster with the Prometheus Operator deployed

Procedure

  • Add the metrics.CreateServiceMonitor() helper function to your Operator code:

    import(
        "k8s.io/api/core/v1"
        "github.com/operator-framework/operator-sdk/pkg/metrics"
        "machine.openshift.io/controller-runtime/pkg/client/config"
    )
    func main() {
    
        ...
        // Populate below with the Service(s) for which you want to create ServiceMonitors.
        services := []*v1.Service{}
        // Create one ServiceMonitor per application per namespace.
        // Change the below value to name of the Namespace you want the ServiceMonitor to be created in.
        ns := "default"
        // restConfig is used for talking to the Kubernetes apiserver
        restConfig := config.GetConfig()
    
        // Pass the Service(s) to the helper function, which in turn returns the array of ServiceMonitor objects.
        serviceMonitors, err := metrics.CreateServiceMonitors(restConfig, ns, services)
        if err != nil {
            // Handle errors here.
        }
        ...
    }

5.11. Configuring leader election

During the lifecycle of an Operator, it is possible that there may be more than one instance running at any given time, for example when rolling out an upgrade for the Operator. In such a scenario, it is necessary to avoid contention between multiple Operator instances using leader election. This ensures only one leader instance handles the reconciliation while the other instances are inactive but ready to take over when the leader steps down.

There are two different leader election implementations to choose from, each with its own trade-off:

Leader-for-life
The leader pod only gives up leadership, using garbage collection, when it is deleted. This implementation precludes the possibility of two instances mistakenly running as leaders, a state also known as split brain. However, this method can be subject to a delay in electing a new leader. For example, when the leader pod is on an unresponsive or partitioned node, the pod-eviction-timeout dictates long how it takes for the leader pod to be deleted from the node and step down, with a default of 5m. See the Leader-for-life Go documentation for more.
Leader-with-lease
The leader pod periodically renews the leader lease and gives up leadership when it cannot renew the lease. This implementation allows for a faster transition to a new leader when the existing leader is isolated, but there is a possibility of split brain in certain situations. See the Leader-with-lease Go documentation for more.

By default, the Operator SDK enables the Leader-for-life implementation. Consult the related Go documentation for both approaches to consider the trade-offs that make sense for your use case.

5.11.1. Operator leader election examples

The following examples illustrate how to use the two leader election options for an Operator, Leader-for-life and Leader-with-lease.

5.11.1.1. Leader-for-life election

With the Leader-for-life election implementation, a call to leader.Become() blocks the Operator as it retries until it can become the leader by creating the config map named memcached-operator-lock:

import (
  ...
  "github.com/operator-framework/operator-sdk/pkg/leader"
)

func main() {
  ...
  err = leader.Become(context.TODO(), "memcached-operator-lock")
  if err != nil {
    log.Error(err, "Failed to retry for leader lock")
    os.Exit(1)
  }
  ...
}

If the Operator is not running inside a cluster, leader.Become() simply returns without error to skip the leader election since it cannot detect the name of the Operator.

5.11.1.2. Leader-with-lease election

The Leader-with-lease implementation can be enabled using the Manager Options for leader election:

import (
  ...
  "sigs.k8s.io/controller-runtime/pkg/manager"
)

func main() {
  ...
  opts := manager.Options{
    ...
    LeaderElection: true,
    LeaderElectionID: "memcached-operator-lock"
  }
  mgr, err := manager.New(cfg, opts)
  ...
}

When the Operator is not running in a cluster, the Manager returns an error when starting because it cannot detect the namespace of the Operator to create the config map for leader election. You can override this namespace by setting the LeaderElectionNamespace option for the Manager.

5.12. Migrating package manifest projects to bundle format

Support for the legacy package manifest format for Operators is removed in OpenShift Container Platform 4.8 and later. If you have an Operator project that was initially created using the package manifest format, you can use the Operator SDK to migrate the project to the bundle format. The bundle format is the preferred packaging format for Operator Lifecycle Manager (OLM) starting in OpenShift Container Platform 4.6.

5.12.1. About packaging format migration

The Operator SDK pkgman-to-bundle command helps in migrating Operator Lifecycle Manager (OLM) package manifests to bundles. The command takes an input package manifest directory and generates bundles for each of the versions of manifests present in the input directory. You can also then build bundle images for each of the generated bundles.

For example, consider the following packagemanifests/ directory for a project in the package manifest format:

Example package manifest format layout

packagemanifests/
└── etcd
    ├── 0.0.1
    │   ├── etcdcluster.crd.yaml
    │   └── etcdoperator.clusterserviceversion.yaml
    ├── 0.0.2
    │   ├── etcdbackup.crd.yaml
    │   ├── etcdcluster.crd.yaml
    │   ├── etcdoperator.v0.0.2.clusterserviceversion.yaml
    │   └── etcdrestore.crd.yaml
    └── etcd.package.yaml

After running the migration, the following bundles are generated in the bundle/ directory:

Example bundle format layout

bundle/
├── bundle-0.0.1
│   ├── bundle.Dockerfile
│   ├── manifests
│   │   ├── etcdcluster.crd.yaml
│   │   ├── etcdoperator.clusterserviceversion.yaml
│   ├── metadata
│   │   └── annotations.yaml
│   └── tests
│       └── scorecard
│           └── config.yaml
└── bundle-0.0.2
    ├── bundle.Dockerfile
    ├── manifests
    │   ├── etcdbackup.crd.yaml
    │   ├── etcdcluster.crd.yaml
    │   ├── etcdoperator.v0.0.2.clusterserviceversion.yaml
    │   ├── etcdrestore.crd.yaml
    ├── metadata
    │   └── annotations.yaml
    └── tests
        └── scorecard
            └── config.yaml

Based on this generated layout, bundle images for both of the bundles are also built with the following names:

  • quay.io/example/etcd:0.0.1
  • quay.io/example/etcd:0.0.2

5.12.2. Migrating a package manifest project to bundle format

Operator authors can use the Operator SDK to migrate a package manifest format Operator project to a bundle format project.

Prerequisites

  • Operator SDK CLI installed
  • Operator project initially generated using the Operator SDK in package manifest format

Procedure

  • Use the Operator SDK to migrate your package manifest project to the bundle format and generate bundle images:

    $ operator-sdk pkgman-to-bundle <package_manifests_dir> \ 1
        [--output-dir <directory>] \ 2
        --image-tag-base <image_name_base> 3
    1
    Specify the location of the package manifests directory for the project, such as packagemanifests/ or manifests/.
    2
    Optional: By default, the generated bundles are written locally to disk to the bundle/ directory. You can use the --output-dir flag to specify an alternative location.
    3
    Set the --image-tag-base flag to provide the base of the image name, such as quay.io/example/etcd, that will be used for the bundles. Provide the name without a tag, because the tag for the images will be set according to the bundle version. For example, the full bundle image names are generated in the format <image_name_base>:<bundle_version>.

Verification

  • Verify that the generated bundle image runs successfully:

    $ operator-sdk run bundle <bundle_image_name>:<tag>

    Example output

    INFO[0025] Successfully created registry pod: quay-io-my-etcd-0-9-4
    INFO[0025] Created CatalogSource: etcd-catalog
    INFO[0026] OperatorGroup "operator-sdk-og" created
    INFO[0026] Created Subscription: etcdoperator-v0-9-4-sub
    INFO[0031] Approved InstallPlan install-5t58z for the Subscription: etcdoperator-v0-9-4-sub
    INFO[0031] Waiting for ClusterServiceVersion "default/etcdoperator.v0.9.4" to reach 'Succeeded' phase
    INFO[0032]   Waiting for ClusterServiceVersion "default/etcdoperator.v0.9.4" to appear
    INFO[0048]   Found ClusterServiceVersion "default/etcdoperator.v0.9.4" phase: Pending
    INFO[0049]   Found ClusterServiceVersion "default/etcdoperator.v0.9.4" phase: Installing
    INFO[0064]   Found ClusterServiceVersion "default/etcdoperator.v0.9.4" phase: Succeeded
    INFO[0065] OLM has successfully installed "etcdoperator.v0.9.4"

5.13. Operator SDK CLI reference

The Operator SDK command-line interface (CLI) is a development kit designed to make writing Operators easier.

Operator SDK CLI syntax

$ operator-sdk <command> [<subcommand>] [<argument>] [<flags>]

Operator authors with cluster administrator access to a Kubernetes-based cluster (such as OpenShift Container Platform) can use the Operator SDK CLI to develop their own Operators based on Go, Ansible, or Helm. Kubebuilder is embedded into the Operator SDK as the scaffolding solution for Go-based Operators, which means existing Kubebuilder projects can be used as is with the Operator SDK and continue to work.

5.13.1. bundle

The operator-sdk bundle command manages Operator bundle metadata.

5.13.1.1. validate

The bundle validate subcommand validates an Operator bundle.

Table 5.18. bundle validate flags

FlagDescription

-h, --help

Help output for the bundle validate subcommand.

--index-builder (string)

Tool to pull and unpack bundle images. Only used when validating a bundle image. Available options are docker, which is the default, podman, or none.

--list-optional

List all optional validators available. When set, no validators are run.

--select-optional (string)

Label selector to select optional validators to run. When run with the --list-optional flag, lists available optional validators.

5.13.2. cleanup

The operator-sdk cleanup command destroys and removes resources that were created for an Operator that was deployed with the run command.

Table 5.19. cleanup flags

FlagDescription

-h, --help

Help output for the run bundle subcommand.

--kubeconfig (string)

Path to the kubeconfig file to use for CLI requests.

n, --namespace (string)

If present, namespace in which to run the CLI request.

--timeout <duration>

Time to wait for the command to complete before failing. The default value is 2m0s.

5.13.3. completion

The operator-sdk completion command generates shell completions to make issuing CLI commands quicker and easier.

Table 5.20. completion subcommands

SubcommandDescription

bash

Generate bash completions.

zsh

Generate zsh completions.

Table 5.21. completion flags

FlagDescription

-h, --help

Usage help output.

For example:

$ operator-sdk completion bash

Example output

# bash completion for operator-sdk                         -*- shell-script -*-
...
# ex: ts=4 sw=4 et filetype=sh

5.13.4. create

The operator-sdk create command is used to create, or scaffold, a Kubernetes API.

5.13.4.1. api

The create api subcommand scaffolds a Kubernetes API. The subcommand must be run in a project that was initialized with the init command.

Table 5.22. create api flags

FlagDescription

-h, --help

Help output for the run bundle subcommand.

5.13.5. generate

The operator-sdk generate command invokes a specific generator to generate code or manifests.

5.13.5.1. bundle

The generate bundle subcommand generates a set of bundle manifests, metadata, and a bundle.Dockerfile file for your Operator project.

Note

Typically, you run the generate kustomize manifests subcommand first to generate the input Kustomize bases that are used by the generate bundle subcommand. However, you can use the make bundle command in an initialized project to automate running these commands in sequence.

Table 5.23. generate bundle flags

FlagDescription

--channels (string)

Comma-separated list of channels to which the bundle belongs. The default value is alpha.

--crds-dir (string)

Root directory for CustomResoureDefinition manifests.

--default-channel (string)

The default channel for the bundle.

--deploy-dir (string)

Root directory for Operator manifests, such as deployments and RBAC. This directory is different from the directory passed to the --input-dir flag.

-h, --help

Help for generate bundle

--input-dir (string)

Directory from which to read an existing bundle. This directory is the parent of your bundle manifests directory and is different from the --deploy-dir directory.

--kustomize-dir (string)

Directory containing Kustomize bases and a kustomization.yaml file for bundle manifests. The default path is config/manifests.

--manifests

Generate bundle manifests.

--metadata

Generate bundle metadata and Dockerfile.

--output-dir (string)

Directory to write the bundle to.

--overwrite

Overwrite the bundle metadata and Dockerfile if they exist. The default value is true.

--package (string)

Package name for the bundle.

-q, --quiet

Run in quiet mode.

--stdout

Write bundle manifest to standard out.

--version (string)

Semantic version of the Operator in the generated bundle. Set only when creating a new bundle or upgrading the Operator.

Additional resources

  • See Bundling an Operator for a full procedure that includes using the make bundle command to call the generate bundle subcommand.

5.13.5.2. kustomize

The generate kustomize subcommand contains subcommands that generate Kustomize data for the Operator.

5.13.5.2.1. manifests

The generate kustomize manifests subcommand generates or regenerates Kustomize bases and a kustomization.yaml file in the config/manifests directory, which are used to build bundle manifests by other Operator SDK commands. This command interactively asks for UI metadata, an important component of manifest bases, by default unless a base already exists or you set the --interactive=false flag.

Table 5.24. generate kustomize manifests flags

FlagDescription

--apis-dir (string)

Root directory for API type definitions.

-h, --help

Help for generate kustomize manifests.

--input-dir (string)

Directory containing existing Kustomize files.

--interactive

When set to false, if no Kustomize base exists, an interactive command prompt is presented to accept custom metadata.

--output-dir (string)

Directory where to write Kustomize files.

--package (string)

Package name.

-q, --quiet

Run in quiet mode.

5.13.6. init

The operator-sdk init command initializes an Operator project and generates, or scaffolds, a default project directory layout for the given plugin.

This command writes the following files:

  • Boilerplate license file
  • PROJECT file with the domain and repository
  • Makefile to build the project
  • go.mod file with project dependencies
  • kustomization.yaml file for customizing manifests
  • Patch file for customizing images for manager manifests
  • Patch file for enabling Prometheus metrics
  • main.go file to run

Table 5.25. init flags

FlagDescription

--help, -h

Help output for the init command.

--plugins (string)

Name and optionally version of the plugin to initialize the project with. Available plugins are ansible.sdk.operatorframework.io/v1, go.kubebuilder.io/v2, go.kubebuilder.io/v3, and helm.sdk.operatorframework.io/v1.

--project-version

Project version. Available values are 2 and 3-alpha, which is the default.

5.13.7. run

The operator-sdk run command provides options that can launch the Operator in various environments.

5.13.7.1. bundle

The run bundle subcommand deploys an Operator in the bundle format with Operator Lifecycle Manager (OLM).

Table 5.26. run bundle flags

FlagDescription

--index-image (string)

Index image in which to inject a bundle. The default image is quay.io/operator-framework/upstream-opm-builder:latest.

--install-mode <install_mode_value>

Install mode supported by the cluster service version (CSV) of the Operator, for example AllNamespaces or SingleNamespace.

--timeout <duration>

Install timeout. The default value is 2m0s.

--kubeconfig (string)

Path to the kubeconfig file to use for CLI requests.

n, --namespace (string)

If present, namespace in which to run the CLI request.

-h, --help

Help output for the run bundle subcommand.

Additional resources

5.13.7.2. bundle-upgrade

The run bundle-upgrade subcommand upgrades an Operator that was previously installed in the bundle format with Operator Lifecycle Manager (OLM).

Table 5.27. run bundle-upgrade flags

FlagDescription

--timeout <duration>

Upgrade timeout. The default value is 2m0s.

--kubeconfig (string)

Path to the kubeconfig file to use for CLI requests.

n, --namespace (string)

If present, namespace in which to run the CLI request.

-h, --help

Help output for the run bundle subcommand.

5.13.8. scorecard

The operator-sdk scorecard command runs the scorecard tool to validate an Operator bundle and provide suggestions for improvements. The command takes one argument, either a bundle image or directory containing manifests and metadata. If the argument holds an image tag, the image must be present remotely.

Table 5.28. scorecard flags

FlagDescription

-c, --config (string)

Path to scorecard configuration file. The default path is bundle/tests/scorecard/config.yaml.

-h, --help

Help output for the scorecard command.

--kubeconfig (string)

Path to kubeconfig file.

-L, --list

List which tests are available to run.

-n, --namespace (string)

Namespace in which to run the test images.

-o, --output (string)

Output format for results. Available values are text, which is the default, and json.

-l, --selector (string)

Label selector to determine which tests are run.

-s, --service-account (string)

Service account to use for tests. The default value is default.

-x, --skip-cleanup

Disable resource cleanup after tests are run.

-w, --wait-time <duration>

Seconds to wait for tests to complete, for example 35s. The default value is 30s.

Additional resources

Chapter 6. Cluster Operators reference

This reference guide indexes the cluster Operators shipped by Red Hat that serve as the architectural foundation for OpenShift Container Platform. Cluster Operators are installed by default, unless otherwise noted, and are managed by the Cluster Version Operator (CVO). For more details on the control plane architecture, see Operators in OpenShift Container Platform.

Cluster administrators can view cluster Operators in the OpenShift Container Platform web console from the AdministrationCluster Settings page.

Note

Cluster Operators are not managed by Operator Lifecycle Manager (OLM) and OperatorHub. OLM and OperatorHub are part of the Operator Framework used in OpenShift Container Platform for installing and running optional add-on Operators.

6.1. Cloud Credential Operator

Purpose

The Cloud Credential Operator (CCO) manages cloud provider credentials as Kubernetes custom resource definitions (CRDs). The CCO syncs on CredentialsRequest custom resources (CRs) to allow OpenShift Container Platform components to request cloud provider credentials with the specific permissions that are required for the cluster to run.

By setting different values for the credentialsMode parameter in the install-config.yaml file, the CCO can be configured to operate in several different modes. If no mode is specified, or the credentialsMode parameter is set to an empty string (""), the CCO operates in its default mode.

Project

openshift-cloud-credential-operator

CRDs

  • credentialsrequests.cloudcredential.openshift.io

    • Scope: Namespaced
    • CR: CredentialsRequest
    • Validation: Yes

Configuration objects

No configuration required.

Additional resources

6.2. Cluster Authentication Operator

Purpose

The Cluster Authentication Operator installs and maintains the Authentication custom resource in a cluster and can be viewed with:

$ oc get clusteroperator authentication -o yaml

Project

cluster-authentication-operator

6.3. Cluster Autoscaler Operator

Purpose

The Cluster Autoscaler Operator manages deployments of the OpenShift Cluster Autoscaler using the cluster-api provider.

Project

cluster-autoscaler-operator

CRDs

  • ClusterAutoscaler: This is a singleton resource, which controls the configuration autoscaler instance for the cluster. The Operator only responds to the ClusterAutoscaler resource named default in the managed namespace, the value of the WATCH_NAMESPACE environment variable.
  • MachineAutoscaler: This resource targets a node group and manages the annotations to enable and configure autoscaling for that group, the min and max size. Currently only MachineSet objects can be targeted.

6.4. Cluster Config Operator

Purpose

The Cluster Config Operator performs the following tasks related to config.openshift.io:

  • Creates CRDs.
  • Renders the initial custom resources.
  • Handles migrations.

Project

cluster-config-operator

6.5. Cluster CSI Snapshot Controller Operator

Purpose

The Cluster CSI Snapshot Controller Operator installs and maintains the CSI Snapshot Controller. The CSI Snapshot Controller is responsible for watching the VolumeSnapshot CRD objects and manages the creation and deletion lifecycle of volume snapshots.

Project

cluster-csi-snapshot-controller-operator

6.6. Cluster Image Registry Operator

Purpose

The Cluster Image Registry Operator manages a singleton instance of the OpenShift Container Platform registry. It manages all configuration of the registry, including creating storage.

On initial start up, the Operator creates a default image-registry resource instance based on the configuration detected in the cluster. This indicates what cloud storage type to use based on the cloud provider.

If insufficient information is available to define a complete image-registry resource, then an incomplete resource is defined and the Operator updates the resource status with information about what is missing.

The Cluster Image Registry Operator runs in the openshift-image-registry namespace and it also manages the registry instance in that location. All configuration and workload resources for the registry reside in that namespace.

Project

cluster-image-registry-operator

6.7. Cluster Machine Approver Operator

Purpose

The Cluster Machine Approver Operator automatically approves the CSRs requested for a new worker node after cluster installation.

Note

For the control plane node, the approve-csr service on the bootstrap node automatically approves all CSRs during the cluster bootstrapping phase.

Project

cluster-machine-approver-operator

6.8. Cluster Monitoring Operator

Purpose

The Cluster Monitoring Operator manages and updates the Prometheus-based cluster monitoring stack deployed on top of OpenShift Container Platform.

Project

openshift-monitoring

CRDs

  • alertmanagers.monitoring.coreos.com

    • Scope: Namespaced
    • CR: alertmanager
    • Validation: Yes
  • prometheuses.monitoring.coreos.com

    • Scope: Namespaced
    • CR: prometheus
    • Validation: Yes
  • prometheusrules.monitoring.coreos.com

    • Scope: Namespaced
    • CR: prometheusrule
    • Validation: Yes
  • servicemonitors.monitoring.coreos.com

    • Scope: Namespaced
    • CR: servicemonitor
    • Validation: Yes

Configuration objects

$ oc -n openshift-monitoring edit cm cluster-monitoring-config

6.9. Cluster Network Operator

Purpose

The Cluster Network Operator installs and upgrades the networking components on an OpenShift Container Platform cluster.

6.10. OpenShift Controller Manager Operator

Purpose

The OpenShift Controller Manager Operator installs and maintains the OpenShiftControllerManager custom resource in a cluster and can be viewed with:

$ oc get clusteroperator openshift-controller-manager -o yaml

The custom resource definitino (CRD) openshiftcontrollermanagers.operator.openshift.io can be viewed in a cluster with:

$ oc get crd openshiftcontrollermanagers.operator.openshift.io -o yaml

Project

cluster-openshift-controller-manager-operator

6.11. Cluster Samples Operator

Purpose

The Cluster Samples Operator manages the sample image streams and templates stored in the openshift namespace.

On initial start up, the Operator creates the default samples configuration resource to initiate the creation of the image streams and templates. The configuration object is a cluster scoped object with the key cluster and type configs.samples.

The image streams are the Red Hat Enterprise Linux CoreOS (RHCOS)-based OpenShift Container Platform image streams pointing to images on registry.redhat.io. Similarly, the templates are those categorized as OpenShift Container Platform templates.

The Cluster Samples Operator deployment is contained within the openshift-cluster-samples-operator namespace. On start up, the install pull secret is used by the image stream import logic in the internal registry and API server to authenticate with registry.redhat.io. An administrator can create any additional secrets in the openshift namespace if they change the registry used for the sample image streams. If created, those secrets contain the content of a config.json for docker needed to facilitate image import.

The image for the Cluster Samples Operator contains image stream and template definitions for the associated OpenShift Container Platform release. After the Cluster Samples Operator creates a sample, it adds an annotation that denotes the OpenShift Container Platform version that it is compatible with. The Operator uses this annotation to ensure that each sample matches the compatible release version. Samples outside of its inventory are ignored, as are skipped samples.

Modifications to any samples that are managed by the Operator are allowed as long as the version annotation is not modified or deleted. However, on an upgrade, as the version annotation will change, those modifications can get replaced as the sample will be updated with the newer version. The Jenkins images are part of the image payload from the installation and are tagged into the image streams directly.

The samples resource includes a finalizer, which cleans up the following upon its deletion:

  • Operator-managed image streams
  • Operator-managed templates
  • Operator-generated configuration resources
  • Cluster status resources

Upon deletion of the samples resource, the Cluster Samples Operator recreates the resource using the default configuration.

Project

cluster-samples-operator

6.12. Cluster Storage Operator

Purpose

The Cluster Storage Operator sets OpenShift Container Platform cluster-wide storage defaults. It ensures a default storage class exists for OpenShift Container Platform clusters.

Project

cluster-storage-operator

Configuration

No configuration is required.

Notes

  • The Cluster Storage Operator supports Amazon Web Services (AWS) and Red Hat OpenStack Platform (RHOSP).
  • The created storage class can be made non-default by editing its annotation, but the storage class cannot be deleted as long as the Operator runs.

6.13. Cluster Version Operator

Purpose

Cluster Operators manage specific areas of cluster functionality. The Cluster Version Operator (CVO) manages the lifecycle of cluster Operators, many of which are installed in OpenShift Container Platform by default.

The CVO also checks with the OpenShift Update Service to see the valid updates and update paths based on current component versions and information in the graph.

Project

cluster-version-operator

Additional resources

6.14. Console Operator

Purpose

The Console Operator installs and maintains the OpenShift Container Platform web console on a cluster.

Project

console-operator

6.15. DNS Operator

Purpose

The DNS Operator deploys and manages CoreDNS to provide a name resolution service to pods that enables DNS-based Kubernetes Service discovery in OpenShift Container Platform.

The Operator creates a working default deployment based on the cluster’s configuration.

  • The default cluster domain is cluster.local.
  • Configuration of the CoreDNS Corefile or Kubernetes plugin is not yet supported.

The DNS Operator manages CoreDNS as a Kubernetes daemon set exposed as a service with a static IP. CoreDNS runs on all nodes in the cluster.

Project

cluster-dns-operator

6.16. etcd cluster Operator

Purpose

The etcd cluster Operator automates etcd cluster scaling, enables etcd monitoring and metrics, and simplifies disaster recovery procedures.

Project

cluster-etcd-operator

CRDs

  • etcds.operator.openshift.io

    • Scope: Cluster
    • CR: etcd
    • Validation: Yes

Configuration objects

$ oc edit etcd cluster

6.17. Ingress Operator

Purpose

The Ingress Operator configures and manages the OpenShift Container Platform router.

Project

openshift-ingress-operator

CRDs

  • clusteringresses.ingress.openshift.io

    • Scope: Namespaced
    • CR: clusteringresses
    • Validation: No

Configuration objects

  • Cluster config

    • Type Name: clusteringresses.ingress.openshift.io
    • Instance Name: default
    • View Command:

      $ oc get clusteringresses.ingress.openshift.io -n openshift-ingress-operator default -o yaml

Notes

The Ingress Operator sets up the router in the openshift-ingress project and creates the deployment for the router:

$ oc get deployment -n openshift-ingress

The Ingress Operator uses the clusterNetwork[].cidr from the network/cluster status to determine what mode (IPv4, IPv6, or dual stack) the managed ingress controller (router) should operate in. For example, if clusterNetwork contains only a v6 cidr, then the ingress controller operate in IPv6-only mode.

In the following example, ingress controllers managed by the Ingress Operator will run in IPv4-only mode because only one cluster network exists and the network is an IPv4 cidr:

$ oc get network/cluster -o jsonpath='{.status.clusterNetwork[*]}'

Example output

map[cidr:10.128.0.0/14 hostPrefix:23]

6.18. Insights Operator

Purpose

The Insights Operator gathers OpenShift Container Platform configuration data and sends it to Red Hat. The data is used to produce proactive insights recommendations about potential issues that a cluster might be exposed to. These insights are communicated to cluster administrators through Insights Advisor on console.redhat.com.

Project

insights-operator

Configuration

No configuration is required.

Notes

Insights Operator compliments OpenShift Container Platform Telemetry.

Additional resources

6.19. Kubernetes API Server Operator

Purpose

The Kubernetes API Server Operator manages and updates the Kubernetes API server deployed on top of OpenShift Container Platform. The Operator is based on the OpenShift Container Platform library-go framework and it is installed using the Cluster Version Operator (CVO).

Project

openshift-kube-apiserver-operator

CRDs

  • kubeapiservers.operator.openshift.io

    • Scope: Cluster
    • CR: kubeapiserver
    • Validation: Yes

Configuration objects

$ oc edit kubeapiserver

6.20. Kubernetes Controller Manager Operator

Purpose

The Kubernetes Controller Manager Operator manages and updates the Kubernetes Controller Manager deployed on top of OpenShift Container Platform. The Operator is based on OpenShift Container Platform library-go framework and it is installed via the Cluster Version Operator (CVO).

It contains the following components:

  • Operator
  • Bootstrap manifest renderer
  • Installer based on static pods
  • Configuration observer

By default, the Operator exposes Prometheus metrics through the metrics service.

Project

cluster-kube-controller-manager-operator

6.21. Kubernetes Scheduler Operator

Purpose

The Kubernetes Scheduler Operator manages and updates the Kubernetes Scheduler deployed on top of OpenShift Container Platform. The Operator is based on the OpenShift Container Platform library-go framework and it is installed with the Cluster Version Operator (CVO).

The Kubernetes Scheduler Operator contains the following components:

  • Operator
  • Bootstrap manifest renderer
  • Installer based on static pods
  • Configuration observer

By default, the Operator exposes Prometheus metrics through the metrics service.

Project

cluster-kube-scheduler-operator

Configuration

The configuration for the Kubernetes Scheduler is the result of merging:

  • a default configuration.
  • an observed configuration from the spec schedulers.config.openshift.io.

All of these are sparse configurations, invalidated JSON snippets which are merged to form a valid configuration at the end.

6.22. Kubernetes Storage Version Migrator Operator

Purpose

The Kubernetes Storage Version Migrator Operator detects changes of the default storage version, creates migration requests for resource types when the storage version changes, and processes migration requests.

Project

cluster-kube-storage-version-migrator-operator

6.23. Machine API Operator

Purpose

The Machine API Operator manages the lifecycle of specific purpose custom resource definitions (CRD), controllers, and RBAC objects that extend the Kubernetes API. This declares the desired state of machines in a cluster.

Project

machine-api-operator

CRDs

  • MachineSet
  • Machine
  • MachineHealthCheck

6.24. Machine Config Operator

Purpose

The Machine Config Operator manages and applies configuration and updates of the base operating system and container runtime, including everything between the kernel and kubelet.

There are four components:

  • machine-config-server: Provides Ignition configuration to new machines joining the cluster.
  • machine-config-controller: Coordinates the upgrade of machines to the desired configurations defined by a MachineConfig object. Options are provided to control the upgrade for sets of machines individually.
  • machine-config-daemon: Applies new machine configuration during update. Validates and verifies the state of the machine to the requested machine configuration.
  • machine-config: Provides a complete source of machine configuration at installation, first start up, and updates for a machine.

Project

openshift-machine-config-operator

6.25. Marketplace Operator

Purpose

The Marketplace Operator is a conduit to bring off-cluster Operators to your cluster.

Project

operator-marketplace

6.26. Node Tuning Operator

Purpose

The Node Tuning Operator helps you manage node-level tuning by orchestrating the TuneD daemon. The majority of high-performance applications require some level of kernel tuning. The Node Tuning Operator provides a unified management interface to users of node-level sysctls and more flexibility to add custom tuning specified by user needs.

The Operator manages the containerized TuneD daemon for OpenShift Container Platform as a Kubernetes daemon set. It ensures the custom tuning specification is passed to all containerized TuneD daemons running in the cluster in the format that the daemons understand. The daemons run on all nodes in the cluster, one per node.

Node-level settings applied by the containerized TuneD daemon are rolled back on an event that triggers a profile change or when the containerized TuneD daemon is terminated gracefully by receiving and handling a termination signal.

The Node Tuning Operator is part of a standard OpenShift Container Platform installation in version 4.1 and later.

Project

cluster-node-tuning-operator

6.27. OpenShift API Server Operator

Purpose

The OpenShift API Server Operator installs and maintains the openshift-apiserver on a cluster.

Project

openshift-apiserver-operator

CRDs

  • openshiftapiservers.operator.openshift.io

    • Scope: Cluster
    • CR: openshiftapiserver
    • Validation: Yes

6.28. Operator Lifecycle Manager Operators

Purpose

Operator Lifecycle Manager (OLM) helps users install, update, and manage the lifecycle of Kubernetes native applications (Operators) and their associated services running across their OpenShift Container Platform clusters. It is part of the Operator Framework, an open source toolkit designed to manage Operators in an effective, automated, and scalable way.

Figure 6.1. Operator Lifecycle Manager workflow

olm workflow

OLM runs by default in OpenShift Container Platform 4.8, which aids cluster administrators in installing, upgrading, and granting access to Operators running on their cluster. The OpenShift Container Platform web console provides management screens for cluster administrators to install Operators, as well as grant specific projects access to use the catalog of Operators available on the cluster.

For developers, a self-service experience allows provisioning and configuring instances of databases, monitoring, and big data services without having to be subject matter experts, because the Operator has that knowledge baked into it.

CRDs

Operator Lifecycle Manager (OLM) is composed of two Operators: the OLM Operator and the Catalog Operator.

Each of these Operators is responsible for managing the custom resource definitions (CRDs) that are the basis for the OLM framework:

Table 6.1. CRDs managed by OLM and Catalog Operators

ResourceShort nameOwnerDescription

ClusterServiceVersion (CSV)

csv

OLM

Application metadata: name, version, icon, required resources, installation, and so on.

InstallPlan

ip

Catalog

Calculated list of resources to be created to automatically install or upgrade a CSV.

CatalogSource

catsrc

Catalog

A repository of CSVs, CRDs, and packages that define an application.

Subscription

sub

Catalog

Used to keep CSVs up to date by tracking a channel in a package.

OperatorGroup

og

OLM

Configures all Operators deployed in the same namespace as the OperatorGroup object to watch for their custom resource (CR) in a list of namespaces or cluster-wide.

Each of these Operators is also responsible for creating the following resources:

Table 6.2. Resources created by OLM and Catalog Operators

ResourceOwner

Deployments

OLM

ServiceAccounts

(Cluster)Roles

(Cluster)RoleBindings

CustomResourceDefinitions (CRDs)

Catalog

ClusterServiceVersions

OLM Operator

The OLM Operator is responsible for deploying applications defined by CSV resources after the required resources specified in the CSV are present in the cluster.

The OLM Operator is not concerned with the creation of the required resources; you can choose to manually create these resources using the CLI or using the Catalog Operator. This separation of concern allows users incremental buy-in in terms of how much of the OLM framework they choose to leverage for their application.

The OLM Operator uses the following workflow:

  1. Watch for cluster service versions (CSVs) in a namespace and check that requirements are met.
  2. If requirements are met, run the install strategy for the CSV.

    Note

    A CSV must be an active member of an Operator group for the install strategy to run.

Catalog Operator

The Catalog Operator is responsible for resolving and installing cluster service versions (CSVs) and the required resources they specify. It is also responsible for watching catalog sources for updates to packages in channels and upgrading them, automatically if desired, to the latest available versions.

To track a package in a channel, you can create a Subscription object configuring the desired package, channel, and the CatalogSource object you want to use for pulling updates. When updates are found, an appropriate InstallPlan object is written into the namespace on behalf of the user.

The Catalog Operator uses the following workflow:

  1. Connect to each catalog source in the cluster.
  2. Watch for unresolved install plans created by a user, and if found:

    1. Find the CSV matching the name requested and add the CSV as a resolved resource.
    2. For each managed or required CRD, add the CRD as a resolved resource.
    3. For each required CRD, find the CSV that manages it.
  3. Watch for resolved install plans and create all of the discovered resources for it, if approved by a user or automatically.
  4. Watch for catalog sources and subscriptions and create install plans based on them.

Catalog Registry

The Catalog Registry stores CSVs and CRDs for creation in a cluster and stores metadata about packages and channels.

A package manifest is an entry in the Catalog Registry that associates a package identity with sets of CSVs. Within a package, channels point to a particular CSV. Because CSVs explicitly reference the CSV that they replace, a package manifest provides the Catalog Operator with all of the information that is required to update a CSV to the latest version in a channel, stepping through each intermediate version.

Additional resources

6.29. OpenShift Service CA Operator

Purpose

The OpenShift Service CA Operator mints and manages serving certificates for Kubernetes services.

Project

openshift-service-ca-operator

6.30. vSphere Problem Detector Operator

Purpose

The vSphere Problem Detector Operator checks clusters that are deployed on vSphere for common installation and misconfiguration issues that are related to storage.

Note

The vSphere Problem Detector Operator is only started by the Cluster Storage Operator when the Cluster Storage Operator detects that the cluster is deployed on vSphere.

Configuration

No configuration is required.

Notes

  • The Operator supports OpenShift Container Platform installations on vSphere.
  • The Operator uses the vsphere-cloud-credentials to communicate with vSphere.
  • The Operator performs checks that are related to storage.

Additional resources

Legal Notice

Copyright © 2023 Red Hat, Inc.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.