Chapter 3. Performing Additional Configuration on Satellite Server

Procedure

1. Navigate to the Red Hat Customer Portal at https://access.redhat.com/ and log in.
2. In the upper left of the window, click Downloads.
3. To the right of Red Hat Enterprise Linux 7, click Versions 7 and below.
4. From the Version list, select the required version of the Red Hat Enterprise Linux 7, for example 7.7.
5. In the Download Red Hat Enterprise Linux window, locate the binary DVD version of the ISO image, for example, Red Hat Enterprise Linux 7.7 Binary DVD, and click Download Now.
6. When the download completes, copy the ISO image to Satellite Server.

7. On Satellite Server, create a mount point and temporarily mount the ISO image at that location:

   # mkdir /mnt/iso
   # mount -o loop rhel-binary-dvd.iso /mnt/iso

8. Create Kickstart directories:

   # mkdir --parents \
   /var/www/html/pub/sat-import/content/dist/rhel/server/7/7.7/x86_64/kickstart/

9. Copy the kickstart files from the ISO image:

   # cp -a /mnt/iso/* /var/www/html/pub/sat-import/content/dist/rhel/server/7/7.7/x86_64/kickstart/

10. Add the following entries to the listing files:

    To the /var/www/html/pub/sat-import/content/dist/rhel/server/7/listing file, append the version number with a new line. For example, for the RHEL 7.7 ISO, append 7.7.

    To the /var/www/html/pub/sat-import/content/dist/rhel/server/7/7.7/listing file, append the architecture with a new line. For example, x86_64.

    To the /var/www/html/pub/sat-import/content/dist/rhel/server/7/7.7/x86_64/listing file, append kickstart with a new line.

11. Copy the .treeinfo files from the ISO image:

    # cp /mnt/iso/.treeinfo \
    /var/www/html/pub/sat-import/content/dist/rhel/server/7/7.7/x86_64/kickstart/treeinfo

12. If you do not plan to use the mounted binary DVD ISO image, unmount and remove the directory:

    # umount /mnt/iso
    # rmdir /mnt/iso

13. In the Satellite web UI, enable the Kickstart repositories.

Procedure

1. Navigate to the Red Hat Customer Portal at https://access.redhat.com/ and log in.
2. In the upper left of the window, click Downloads.
3. Click Red Hat Enterprise Linux 8.
4. In the Download Red Hat Enterprise Linux window, locate the binary DVD version of the ISO image, for example, Red Hat Enterprise Linux 8.1 Binary DVD, and click Download Now.
5. When the download completes, copy the ISO image to Satellite Server.

6. On Satellite Server, create a mount point and temporarily mount the ISO image at that location:

   # mkdir /mnt/iso
   # mount -o loop rhel-binary-dvd.iso /mnt/iso

7. Create directories for Red Hat Enterprise Linux 8 AppStream and BaseOS Kickstart repositories:

   # mkdir --parents \
   /var/www/html/pub/sat-import/content/dist/rhel8/8.1/x86_64/appstream/kickstart
   
   # mkdir --parents \
    /var/www/html/pub/sat-import/content/dist/rhel8/8.1/x86_64/baseos/kickstart

8. Copy the kickstart files from the ISO image:

   # cp -a /mnt/iso/AppStream/* \
   /var/www/html/pub/sat-import/content/dist/rhel8/8.1/x86_64/appstream/kickstart
   
   # cp -a /mnt/iso/BaseOS/* /mnt/iso/images/ \
   /var/www/html/pub/sat-import/content/dist/rhel8/8.1/x86_64/baseos/kickstart

   Note that for BaseOS, you must also copy the contents of the /mnt/iso/images/ directory.

9. Add the following entries to the listing files:

   To the /var/www/html/pub/sat-import/content/dist/rhel8/8.1/x86_64/appstream/listing file, append kickstart with a new line.

   To the /var/www/html/pub/sat-import/content/dist/rhel8/8.1/x86_64/baseos/listing file, append kickstart with a new line:

   To the /var/www/html/pub/sat-import/content/dist/rhel8/listing file, append the version number with a new line. For example, for the RHEL 8.1 binary ISO, append 8.1.

10. Copy the .treeinfo files from the ISO image:

    # cp /mnt/iso/.treeinfo \
    /var/www/html/pub/sat-import/content/dist/rhel8/8.1/x86_64/appstream/kickstart/treeinfo
    
    # cp /mnt/iso/.treeinfo \
    /var/www/html/pub/sat-import/content/dist/rhel8/8.1/x86_64/baseos/kickstart/treeinfo

11. Open the /var/www/html/pub/sat-import/content/dist/rhel8/8.1/x86_64/baseos/kickstart/treeinfo file for editing.

12. In the [general] section, make the following changes:

    • Change packagedir = AppStream/Packages to packagedir = Packages
    • Change repository = AppStream to repository = .
    • Change variant = AppStream to variant = BaseOS
    • Change variants = AppStream,BaseOS to variants = BaseOS
13. In the [tree] section, change variants = AppStream,BaseOS to variants = BaseOS.

14. In the [variant-BaseOS] section, make the following changes:

    • Change packages = BaseOS/Packages to packages = Packages
    • Change repository = BaseOS to repository = .
15. Delete the [media] and [variant-AppStream] sections.
16. Save and close the file.

17. Verify that the /var/www/html/pub/sat-import/content/dist/rhel8/8.1/x86_64/baseos/kickstart/treeinfo file has the following format:

    [checksums]
    images/efiboot.img = sha256:9ad9beee4c906cd05d227a1be7a499c8d2f20b3891c79831325844c845262bb6
    images/install.img = sha256:e246bf4aedfff3bb54ae9012f959597cdab7387aadb3a504f841bdc2c35fe75e
    images/pxeboot/initrd.img = sha256:a66e3c158f02840b19c372136a522177a2ab4bd91cb7269fb5bfdaaf7452efef
    images/pxeboot/vmlinuz = sha256:789028335b64ddad343f61f2abfdc9819ed8e9dfad4df43a2694c0a0ba780d16
    
    [general]
    ; WARNING.0 = This section provides compatibility with pre-productmd treeinfos.
    ; WARNING.1 = Read productmd documentation for details about new format.
    arch = x86_64
    family = Red Hat Enterprise Linux
    name = Red Hat Enterprise Linux 8.1.0
    packagedir = Packages
    platforms = x86_64,xen
    repository = .
    timestamp = 1571146127
    variant = BaseOS
    variants = BaseOS
    version = 8.1.0
    
    [header]
    type = productmd.treeinfo
    version = 1.2
    
    [images-x86_64]
    efiboot.img = images/efiboot.img
    initrd = images/pxeboot/initrd.img
    kernel = images/pxeboot/vmlinuz
    
    [images-xen]
    initrd = images/pxeboot/initrd.img
    kernel = images/pxeboot/vmlinuz
    
    [release]
    name = Red Hat Enterprise Linux
    short = RHEL
    version = 8.1.0
    
    [stage2]
    mainimage = images/install.img
    
    [tree]
    arch = x86_64
    build_timestamp = 1571146127
    platforms = x86_64,xen
    variants = BaseOS
    
    [variant-BaseOS]
    id = BaseOS
    name = BaseOS
    packages = Packages
    repository = .
    type = variant
    uid = BaseOS

18. Open the /var/www/html/pub/sat-import/content/dist/rhel8/8.1/x86_64/appstream/kickstart/treeinfo file for editing.

19. In the [general] section, make the following changes:

    • Change packagedir = AppStream/Packages to packagedir = Packages
    • Change repository = AppStream to repository = .
    • Change variants = AppStream,BaseOS to variants = AppStream
20. In the [tree] section, change variants = AppStream,BaseOS to variants = AppStream

21. In the [variant-AppStream] section, make the following changes:

    • Change packages = AppStream/Packages to packages = Packages
    • Change repository = AppStream to repository = .
22. Delete the following sections from the file: [checksums], [images-x86_64], [images-xen], [media], [stage2], [variant-BaseOS].
23. Save and close the file.

24. Verify that the /var/www/html/pub/sat-import/content/dist/rhel8/8.1/x86_64/appstream/kickstart/treeinfo file has the following format:

    [general]
    ; WARNING.0 = This section provides compatibility with pre-productmd treeinfos.
    ; WARNING.1 = Read productmd documentation for details about new format.
    arch = x86_64
    family = Red Hat Enterprise Linux
    name = Red Hat Enterprise Linux 8.1.0
    packagedir = Packages
    platforms = x86_64,xen
    repository = .
    timestamp = 1571146127
    variant = AppStream
    variants = AppStream
    version = 8.1.0
    
    [header]
    type = productmd.treeinfo
    version = 1.2
    
    [release]
    name = Red Hat Enterprise Linux
    short = RHEL
    version = 8.1.0
    
    [tree]
    arch = x86_64
    build_timestamp = 1571146127
    platforms = x86_64,xen
    variants = AppStream
    
    [variant-AppStream]
    id = AppStream
    name = AppStream
    packages = Packages
    repository = .
    type = variant
    uid = AppStream

25. If you do not plan to use the mounted binary DVD ISO image, unmount and remove the directory:

    # umount /mnt/iso
    # rmdir /mnt/iso

26. In the Satellite web UI, enable the Kickstart repositories.

1. To store all the source certificate files, create a directory that is accessible only to the root user.

   # mkdir /root/satellite_cert

2. Create a private key with which to sign the Certificate Signing Request (CSR).

   Note that the private key must be unencrypted. If you use a password-protected private key, remove the private key password.

   If you already have a private key for this Satellite Server, skip this step.

   # openssl genrsa -out /root/satellite_cert/satellite_cert_key.pem 4096

3. Create the /root/satellite_cert/openssl.cnf configuration file for the Certificate Signing Request (CSR) and include the following content:

   [ req ]
   req_extensions = v3_req
   distinguished_name = req_distinguished_name
   x509_extensions = usr_cert
   prompt = no
   
   [ req_distinguished_name ] 1
   C  = Country Name (2 letter code)
   ST = State or Province Name (full name)
   L  = Locality Name (eg, city)
   O  = Organization Name (eg, company)
   OU = The division of your organization handling the certificate
   CN = satellite.example.com 2
   
   [ v3_req ]
   basicConstraints = CA:FALSE
   keyUsage = digitalSignature, nonRepudiation, keyEncipherment, dataEncipherment
   extendedKeyUsage = serverAuth, clientAuth, codeSigning, emailProtection
   subjectAltName = @alt_names
   
   [ usr_cert ]
   basicConstraints=CA:FALSE
   nsCertType = client, server, email
   keyUsage = nonRepudiation, digitalSignature, keyEncipherment
   extendedKeyUsage = serverAuth, clientAuth, codeSigning, emailProtection
   nsComment = "OpenSSL Generated Certificate"
   subjectKeyIdentifier=hash
   authorityKeyIdentifier=keyid,issuer
   
   [ alt_names ]
   DNS.1 = satellite.example.com 3

   1

   In the [ req_distinguished_name ] section, enter information about your organization.

   2

   Set the certificate’s Common Name CN to match the fully qualified domain name (FQDN) of your Satellite Server. To confirm a FQDN, on that Satellite Server, enter the hostname -f command. This is required to ensure that the katello-certs-check command validates the certificate correctly.

   3

   Set the Subject Alternative Name (SAN) DNS.1 to match the fully qualified domain name (FQDN) of your server.

4. Generate the Certificate Signing Request (CSR):

   # openssl req -new \
   -key /root/satellite_cert/satellite_cert_key.pem \ 1
   -config /root/satellite_cert/openssl.cnf \ 2
   -out /root/satellite_cert/satellite_cert_csr.pem 3

   1

   Path to the private key.

   2

   Path to the configuration file.

   3

   Path to the CSR to generate.

5. Send the certificate signing request to the Certificate Authority. The same Certificate Authority must sign certificates for Satellite Server and Capsule Server.

   When you submit the request, specify the lifespan of the certificate. The method for sending the certificate request varies, so consult the Certificate Authority for the preferred method. In response to the request, you can expect to receive a Certificate Authority bundle and a signed certificate, in separate files.

1. Validate the custom SSL certificate input files. Note that for the katello-certs-check command to work correctly, Common Name (CN) in the certificate must match the FQDN of Satellite Server.

   # katello-certs-check \
   -c /root/satellite_cert/satellite_cert.pem \      1
   -k /root/satellite_cert/satellite_cert_key.pem \  2
   -b /root/satellite_cert/ca_cert_bundle.pem        3

   1

   Path to the Satellite Server certificate file that is signed by a Certificate Authority.

   2

   Path to the private key that was used to sign the Capsule Server certificate.

   3

   Path to the Certificate Authority bundle.

   If the command is successful, it returns two satellite-installer commands, one of which you must use to deploy a certificate to Satellite Server.

   Example output of katello-certs-check

   Validation succeeded.
   
   To install the Red Hat Satellite Server with the custom certificates, run:
   
     satellite-installer --scenario satellite \
       --certs-server-cert "/root/satellite_cert/satellite_cert.pem" \
       --certs-server-key "/root/satellite_cert/satellite_cert_key.pem" \
       --certs-server-ca-cert "/root/satellite_cert/ca_cert_bundle.pem"
   
   To update the certificates on a currently running Red Hat Satellite installation, run:
   
     satellite-installer --scenario satellite \
       --certs-server-cert "/root/satellite_cert/satellite_cert.pem" \
       --certs-server-key "/root/satellite_cert/satellite_cert_key.pem" \
       --certs-server-ca-cert "/root/satellite_cert/ca_cert_bundle.pem" \
       --certs-update-server --certs-update-server-ca

2. From the output of the katello-certs-check command, depending on your requirements, enter the satellite-installer command that installs a new Satellite with custom SSL certificates or updates certificates on a currently running Satellite.

   If you are unsure which command to run, you can verify that Satellite is installed by checking if the file /etc/foreman-installer/scenarios.d/.installed exists. If the file exists, run the second satellite-installer command that updates certificates.

   Important

   Do not delete the certificate archive file after you deploy the certificate. It is required, for example, when upgrading Satellite Server.

3. On a computer with network access to Satellite Server, navigate to the following URL: https://satellite.example.com.
4. In your browser, view the certificate details to verify the deployed certificate.

Procedure

1. Use the instructions in Attaching the Satellite Infrastructure Subscription to attach a Satellite subscription to your server.

2. Disable all repositories and enable only the following repositories:

   # subscription-manager repos --disable '*'
   # subscription-manager repos --enable=rhel-server-rhscl-7-rpms \
   --enable=rhel-7-server-rpms --enable=rhel-7-server-satellite-6.9-rpms

Procedure

1. To install MongoDB, enter the following command:

   # yum install rh-mongodb34 rh-mongodb34-syspaths

2. Start and enable the rh-mongodb34 service:

   # systemctl start rh-mongodb34-mongod
   # systemctl enable rh-mongodb34-mongod

3. Create a Pulp user on MongoDB for database pulp_database:

   # mongo pulp_database \
   --eval "db.createUser({user:'pulp',pwd:'pulp_password',roles:[{role:'dbOwner', db:'pulp_database'},{ role: 'readWrite', db: 'pulp_database'}]})"

4. In the /etc/opt/rh/rh-mongodb34/mongod.conf file, specify the bind IP:

   bindIp: your_mongodb_server_bind_IP,::1

5. Edit the /etc/opt/rh/rh-mongodb34/mongod.conf file to enable authentication in the security section:

   security:
     authorization: enabled

6. Restart the rh-mongodb34-mongod service:

   # systemctl restart rh-mongodb34-mongod

7. Open port 27017 for MongoDB:

   # firewall-cmd --add-port=27017/tcp
   # firewall-cmd --runtime-to-permanent

8. From Satellite Server, test that you can access the database. If the connection succeeds, the command returns 1.

   # scl enable rh-mongodb34 " mongo --host mongo.example.com \
   -u pulp -p pulp_password --port 27017 --eval 'ping:1' pulp_database"

Procedure

1. To install PostgreSQL, enter the following command:

   # yum install rh-postgresql12-postgresql-server \
   rh-postgresql12-syspaths \
   rh-postgresql12-postgresql-evr

2. To initialize PostgreSQL, enter the following command:

   # postgresql-setup initdb

3. Edit the /var/opt/rh/rh-postgresql12/lib/pgsql/data/postgresql.conf file:

   # vi /var/opt/rh/rh-postgresql12/lib/pgsql/data/postgresql.conf

4. Remove the # and edit to listen to inbound connections:

   listen_addresses = '*'

5. Edit the /var/opt/rh/rh-postgresql12/lib/pgsql/data/pg_hba.conf file:

   # vi /var/opt/rh/rh-postgresql12/lib/pgsql/data/pg_hba.conf

6. Add the following line to the file:

     host  all   all   Satellite_ip/24   md5

7. To start, and enable PostgreSQL service, enter the following commands:

   # systemctl start postgresql
   # systemctl enable postgresql

8. Open the postgresql port on the external PostgreSQL server:

   # firewall-cmd --add-service=postgresql
   # firewall-cmd --runtime-to-permanent

9. Switch to the postgres user and start the PostgreSQL client:

   $ su - postgres -c psql

10. Create three databases and dedicated roles: one for Satellite, one for Candlepin, and one for Pulp:

    CREATE USER "foreman" WITH PASSWORD 'Foreman_Password';
    CREATE USER "candlepin" WITH PASSWORD 'Candlepin_Password';
    CREATE USER "pulp" WITH PASSWORD 'Pulpcore_Password';
    CREATE DATABASE foreman OWNER foreman;
    CREATE DATABASE candlepin OWNER candlepin;
    CREATE DATABASE pulpcore OWNER pulp;

11. Exit the postgres user:

    # \q

12. From Satellite Server, test that you can access the database. If the connection succeeds, the commands return 1.

    # PGPASSWORD='Foreman_Password' psql -h postgres.example.com  -p 5432 -U foreman -d foreman -c "SELECT 1 as ping"
    # PGPASSWORD='Candlepin_Password' psql -h postgres.example.com -p 5432 -U candlepin -d candlepin -c "SELECT 1 as ping"
    # PGPASSWORD='Pulpcore_Password' psql -h postgres.example.com -p 5432 -U pulpcore -d pulpcore -c "SELECT 1 as ping"

Procedure

1. To configure the external databases for Satellite, enter the following command:

   satellite-installer --scenario satellite \
     --foreman-db-host postgres.example.com \
     --foreman-db-password Foreman_Password \
     --foreman-db-database foreman \
     --foreman-db-manage false \
     --katello-candlepin-db-host postgres.example.com \
     --katello-candlepin-db-name candlepin \
     --katello-candlepin-db-password Candlepin_Password \
     --katello-candlepin-manage-db false \
     --foreman-proxy-content-pulpcore-manage-postgresql false \
     --foreman-proxy-content-pulpcore-postgresql-host postgres.example.com \
     --foreman-proxy-content-pulpcore-postgresql-db-name pulpcore \
     --foreman-proxy-content-pulpcore-postgresql-password Pulpcore_Password \
     --katello-pulp-db-username pulp \
     --katello-pulp-db-password pulp_password \
     --katello-pulp-db-seeds mongo.example.com:27017 \
     --katello-pulp-db-name pulp_database

2. Verify the status of the databases:

   • For PostgreSQL, enter the following command:

     # satellite-maintain service status --only postgresql

   • For MongoDB, enter the following command:

     # satellite-maintain service status --only rh-mongodb34-mongod