Chapter 3. Installing Satellite Server
When you install Satellite Server from a connected network, you can obtain packages and receive updates directly from the Red Hat Content Delivery Network.
You cannot register Satellite Server to itself.
Use the following procedures to install Satellite Server, perform the initial configuration, and import subscription manifests. For more information on subscription manifests, see Managing Subscriptions in the Content Management Guide.
Note that the Satellite 6 installation script is based on Puppet, which means that if you run the installation script more than once, it might overwrite any manual configuration changes. To avoid this and determine which future changes apply, use the
--noop argument when you run the installation script. This argument ensures that no actual changes are made. Potential changes are written to
Files are always backed up and so you can revert any unwanted changes. For example, in the foreman-installer logs, you can see an entry similar to the following about Filebucket:
/Stage[main]/Dhcp/File[/etc/dhcp/dhcpd.conf]: Filebucketed /etc/dhcp/dhcpd.conf to puppet with sum 622d9820b8e764ab124367c68f5fa3a1
You can restore the previous file as follows:
# puppet filebucket -l \ restore /etc/dhcp/dhcpd.conf 622d9820b8e764ab124367c68f5fa3a1
3.1. Registering to Red Hat Subscription Management
Registering the host to Red Hat Subscription Management enables the host to subscribe to and consume content for any subscriptions available to the user. This includes content such as Red Hat Enterprise Linux, Red Hat Software Collections (RHSCL), and Red Hat Satellite.
Register your system with the Red Hat Content Delivery Network, entering your Customer Portal user name and password when prompted:
# subscription-manager register
The command displays output similar to the following:
# subscription-manager register Username: user_name Password: The system has been registered with ID: 541084ff2-44cab-4eb1-9fa1-7683431bcf9a
3.2. Attaching the Satellite Infrastructure Subscription
After you have registered Satellite Server, you must identify your subscription Pool ID and attach an available subscription. The Red Hat Satellite Infrastructure subscription provides access to the Red Hat Satellite, Red Hat Enterprise Linux, and Red Hat Software Collections (RHSCL) content. This is the only subscription required.
Red Hat Satellite Infrastructure is included with all subscriptions that include Smart Management. For more information, see the Red Hat Knowledgebase solution Satellite Infrastructure Subscriptions MCT3718 MCT3719.
Subscriptions are classified as available if they are not already attached to a system. If you are unable to find an available Satellite subscription, see the Red Hat Knowledgebase solution How do I figure out which subscriptions have been consumed by clients registered under Red Hat Subscription Manager? to run a script to see if your subscription is being consumed by another system.
Identify the Pool ID of the Satellite Infrastructure subscription:
# subscription-manager list --all --available --matches 'Red Hat Satellite Infrastructure Subscription'
The command displays output similar to the following:
Subscription Name: Red Hat Satellite Infrastructure Subscription Provides: Red Hat Satellite Red Hat Software Collections (for RHEL Server) Red Hat CodeReady Linux Builder for x86_64 Red Hat Ansible Engine Red Hat Enterprise Linux Load Balancer (for RHEL Server) Red Hat Red Hat Software Collections (for RHEL Server) Red Hat Enterprise Linux Server Red Hat Satellite Capsule Red Hat Enterprise Linux for x86_64 Red Hat Enterprise Linux High Availability for x86_64 Red Hat Satellite Red Hat Satellite 5 Managed DB Red Hat Satellite 6 Red Hat Discovery SKU: MCT3719 Contract: 11878983 Pool ID: 8a85f99968b92c3701694ee998cf03b8 Provides Management: No Available: 1 Suggested: 1 Service Level: Premium Service Type: L1-L3 Subscription Type: Standard Ends: 03/04/2020 System Type: Physical
- Make a note of the subscription Pool ID. Your subscription Pool ID is different from the example provided.
Attach the Satellite Infrastructure subscription to the base operating system that your Satellite Server is running on:
# subscription-manager attach --pool=pool_id
The command displays output similar to the following:
Successfully attached a subscription for: Red Hat Satellite Infrastructure Subscription
Optional: Verify that the Satellite Infrastructure subscription is attached:
# subscription-manager list --consumed
3.3. Configuring Repositories
Use this procedure to enable the repositories that are required to install Satellite Server. Choose from the available list which operating system and version you are installing on:
3.3.1. Red Hat Enterprise Linux 7
Disable all repositories:
# subscription-manager repos --disable "*"
Enable the following repositories:
# subscription-manager repos --enable=rhel-7-server-rpms \ --enable=rhel-7-server-satellite-6.10-rpms \ --enable=rhel-7-server-satellite-maintenance-6-rpms \ --enable=rhel-server-rhscl-7-rpms \ --enable=rhel-7-server-ansible-2.9-rpms
If you are installing Satellite Server as a virtual machine hosted on Red Hat Virtualization, you must also enable the Red Hat Common repository, and install Red Hat Virtualization guest agents and drivers. For more information, see Installing the Guest Agents and Drivers on Red Hat Enterprise Linux in the Virtual Machine Management Guide for more information.
3.4. Installing Satellite Server Packages
3.4.1. Red Hat Enterprise Linux 7
Update all packages:
# yum update
Install Satellite Server packages:
# yum install satellite
3.5. Synchronizing the System Clock With chronyd
To minimize the effects of time drift, you must synchronize the system clock on the base operating system on which you want to install Satellite Server with Network Time Protocol (NTP) servers. If the base operating system clock is configured incorrectly, certificate verification might fail.
For more information about the
chrony suite, see Configuring NTP Using the chrony Suite in the Red Hat Enterprise Linux 7 System Administrator’s Guide.
# yum install chrony
Start and enable the
# systemctl start chronyd # systemctl enable chronyd
3.6. Installing the SOS Package on the Base Operating System
Install the sos package on the base operating system so that you can collect configuration and diagnostic information from a Red Hat Enterprise Linux system. You can also use it to provide the initial system analysis, which is required when opening a service request with Red Hat Technical Support. For more information on using
sos, see the Knowledgebase solution What is a sosreport and how to create one in Red Hat Enterprise Linux 4.6 and later? on the Red Hat Customer Portal.
Install the sos package:
# yum install sos
3.7. Configuring Satellite Server
Install Satellite Server using the
satellite-installer installation script.
This method is performed by running the installation script with one or more command options. The command options override the corresponding default initial configuration options and are recorded in the Satellite answer file. You can run the script as often as needed to configure any necessary options.
Depending on the options that you use when running the Satellite installer, the configuration can take several minutes to complete.
3.7.1. Configuring Satellite
This initial configuration procedure creates an organization, location, user name, and password. After the initial configuration, you can create additional organizations and locations if required. The initial configuration also installs PostgreSQL databases on the same server.
The installation process can take tens of minutes to complete. If you are connecting remotely to the system, use a utility such as
tmux that allows suspending and reattaching a communication session so that you can check the installation progress in case you become disconnected from the remote system. The Red Hat Knowledgebase article How to use the screen command describes installing
screen; alternately see the
screen manual page for more information. If you lose connection to the shell where the installation command is running, see the log at
/var/log/foreman-installer/satellite.log to determine if the process completed successfully.
satellite-installer --scenario satellite --helpcommand to display the available options and any default values. If you do not specify any values, the default values are used.
Specify a meaningful value for the option:
--foreman-initial-organization. This can be your company name. An internal label that matches the value is also created and cannot be changed afterwards. If you do not specify a value, an organization called Default Organization with the label Default_Organization is created. You can rename the organization name but not the label.
Remote Execution is the primary method of managing packages on Content Hosts. If you want to use the deprecated Katello Agent instead of Remote Execution SSH, use the
--foreman-proxy-content-enable-katello-agent=trueoption to enable it. The same option should be given on any Capsule Server as well as Satellite Server.
By default, all configuration files configured by the installer are managed by Puppet. When
satellite-installerruns, it overwrites any manual changes to the Puppet managed files with the initial values. By default, Satellite Server is installed with the Puppet agent running as a service. If required, you can disable Puppet agent on Satellite Server using the
If you want to manage DNS files and DHCP files manually, use the
--foreman-proxy-dhcp-managed=falseoptions so that Puppet does not manage the files related to the respective services. For more information on how to apply custom configuration on other services, see Applying Custom Configuration to Satellite.
Enter the following command with any additional options that you want to use:
# satellite-installer --scenario satellite \ --foreman-initial-organization "initial_organization_name" \ --foreman-initial-location "initial_location_name" \ --foreman-initial-admin-username admin_user_name \ --foreman-initial-admin-password admin_password
The script displays its progress and writes logs to
/var/log/foreman-installer/satellite-installer --scenario satellite.log.
3.8. Importing a Subscription Manifest into Satellite Server
Use the following procedure to import a Subscription Manifest into Satellite Server.
- You must have a Subscription Manifest file exported from the Customer Portal. For more information, see Using Manifests in the Using Red Hat Subscription Management guide.
- In the Satellite web UI, ensure the context is set to the organization you want to use.
- Navigate to Content > Subscriptions and click Manage Manifest.
- In the Manage Manifest window, click Browse.
- Navigate to the location that contains the Subscription Manifest file, then click Open. If the Manage Manifest window does not close automatically, click Close to return to the Subscriptions window.
Copy the Subscription Manifest file from your client to Satellite Server:
$ scp ~/manifest_file.zip firstname.lastname@example.org:~/.
Log in to Satellite Server as the
rootuser and import the Subscription Manifest file:
# hammer subscription upload \ --file ~/manifest_file.zip \ --organization "organization_name"