Generate the containers-prepare-parameters.yaml file that contains the default ContainerImagePrepare parameters:

[stack@all-in-one]$ openstack tripleo container image prepare default --output-env-file $HOME/containers-prepare-parameters.yaml

Edit the containers-prepare-parameters.yaml file and include your Red Hat credentials in the ContainerImageRegistryCredentials parameter so that the deployment process can authenticate with registry.redhat.io and pull container images successfully:

parameter_defaults:
  ContainerImagePrepare:
  ...
  ContainerImageRegistryCredentials:
    registry.redhat.io:
      <USERNAME>: "<PASSWORD>"

Set the ContainerImageRegistryLogin parameter to true in the containers-prepare-parameters.yaml:

parameter_defaults:
  ContainerImagePrepare:
  ...
  ContainerImageRegistryCredentials:
    registry.redhat.io:
      <USERNAME>: "<PASSWORD>"
  ContainerImageRegistryLogin: true

If you want to use the all-in-one host as the container registry, omit this parameter and include --local-push-destination in the openstack tripleo container image prepare command. For more information, see Preparing container images.

Create the $HOME/standalone_parameters.yaml file and configure basic parameters for your all-in-one RHOSP environment, including network configuration and some deployment options. In this example, network interface eth1 is the interface on the management network that you use to deploy RHOSP. eth1 has the IP address 192.168.25.2:

[stack@all-in-one]$ export IP=192.168.25.2
[stack@all-in-one]$ export VIP=192.168.25.3
[stack@all-in-one]$ export NETMASK=24
[stack@all-in-one]$ export INTERFACE=eth1
[stack@all-in-one]$ export DNS1=1.1.1.1
[stack@all-in-one]$ export DNS2=8.8.8.8

[stack@all-in-one]$ cat <<EOF > $HOME/standalone_parameters.yaml
parameter_defaults:
  CloudName: $IP
  CloudDomain: localdomain
  ControlPlaneStaticRoutes: []
  Debug: true
  DeploymentUser: $USER
  KernelIpNonLocalBind: 1
  DockerInsecureRegistryAddress:
    - $IP:8787
  NeutronPublicInterface: $INTERFACE
  NeutronDnsDomain: localdomain
  NeutronBridgeMappings: datacentre:br-ctlplane
  NeutronPhysicalBridge: br-ctlplane
  StandaloneEnableRoutedNetworks: false
  StandaloneHomeDir: $HOME
  StandaloneLocalMtu: 1500
EOF

If you use only a single network interface, you must define the default route:

ControlPlaneStaticRoutes:
  - ip_netmask: 0.0.0.0/0
    next_hop: $GATEWAY
    default: true

If you have an internal time source, or if your environment blocks access to external time sources, use the NtpServer parameter to define the time source that you want to use:

parameter_defaults:
  NtpServer:
    - clock.example.com

If you want to use the all-in-one RHOSP installation in a virtual environment, you must define the virtualization type with the NovaComputeLibvirtType parameter:

parameter_defaults:
  NovaComputeLibvirtType: qemu

The Load-balancing service (octavia) does not require that you configure SSH. However, if you want SSH access to the load-balancing instances (amphorae), add the OctaviaAmphoraSshKeyFile parameter with a value of the absolute path to your public key file for the stack user: OctaviaAmphoraSshKeyFile: "/home/stack/.ssh/id_rsa.pub"

To disable a service, create a new environment file and include the value OS::Heat::None for the service that you want to disable:

    - OS::TripleO::Services::<SERVICE>: OS::Heat::None

Include this environment file in the deployment command.

To enable a service, create a new environment file and remove the value OS::Heat::None from the service that you want to enable:

    - OS::TripleO::Services::<SERVICE>:

Include this environment file in the deployment command.

Create configuration helper variables:

# standalone with project networking and provider networking
export OS_CLOUD=standalone
export GATEWAY=192.168.25.1
export STANDALONE_HOST=192.168.25.2
export PUBLIC_NETWORK_CIDR=192.168.25.0/24
export PRIVATE_NETWORK_CIDR=192.168.100.0/24
export PUBLIC_NET_START=192.168.25.4
export PUBLIC_NET_END=192.168.25.15
export DNS_SERVER=1.1.1.1

Create a basic flavor:

$ openstack flavor create --ram 512 --disk 1 --vcpu 1 --public tiny

Download CirrOS and create an OpenStack image:

$ wget https://download.cirros-cloud.net/0.4.0/cirros-0.4.0-x86_64-disk.img
$ openstack image create cirros --container-format bare --disk-format qcow2 --public --file cirros-0.4.0-x86_64-disk.img

Configure SSH:

$ ssh-keygen -m PEM -t rsa -b 2048 -f ~/.ssh/id_rsa_pem
$ openstack keypair create --public-key ~/.ssh/id_rsa_pem.pub default

Create a simple network security group:

$ openstack security group create basic

Configure the new network security group:

Create Neutron networks:

$ openstack network create --external --provider-physical-network datacentre --provider-network-type flat public
$ openstack network create --internal private
$ openstack subnet create public-net \
    --subnet-range $PUBLIC_NETWORK_CIDR \
    --no-dhcp \
    --gateway $GATEWAY \
    --allocation-pool start=$PUBLIC_NET_START,end=$PUBLIC_NET_END \
    --network public
$ openstack subnet create private-net \
    --subnet-range $PRIVATE_NETWORK_CIDR \
    --network private

Create a virtual router:

# NOTE: In this case an IP will be automatically assigned
# from the allocation pool for the subnet.
$ openstack router create vrouter
$ openstack router set vrouter --external-gateway public
$ openstack router add subnet vrouter private-net

Create a floating IP:

$ openstack floating ip create public

Launch the instance:

$ openstack server create --flavor tiny --image cirros --key-name default --network private --security-group basic myserver

Assign the floating IP:

$ openstack server add floating ip myserver <FLOATING_IP>

Replace FLOATING_IP with the address of the floating IP that you create in a previous step.

Test SSH:

ssh cirros@<FLOATING_IP>

Replace FLOATING_IP with the address of the floating IP that you create in a previous step.

Create configuration helper variables:

# standalone with project networking and provider networking
export OS_CLOUD=standalone
export GATEWAY=192.168.25.1
export STANDALONE_HOST=192.168.25.2
export VROUTER_IP=192.168.25.3
export PUBLIC_NETWORK_CIDR=192.168.25.0/24
export PUBLIC_NET_START=192.168.25.4
export PUBLIC_NET_END=192.168.25.15
export DNS_SERVER=1.1.1.1

Create a basic flavor:

$ openstack flavor create --ram 512 --disk 1 --vcpu 1 --public tiny

Download CirrOS and create an OpenStack image:

$ wget https://download.cirros-cloud.net/0.4.0/cirros-0.4.0-x86_64-disk.img
$ openstack image create cirros --container-format bare --disk-format qcow2 --public --file cirros-0.4.0-x86_64-disk.img

Configure SSH:

$ ssh-keygen -m PEM -t rsa -b 2048 -f ~/.ssh/id_rsa_pem
$ openstack keypair create --public-key ~/.ssh/id_rsa_pem.pub default

Create a simple network security group:

$ openstack security group create basic

Configure the new network security group:

Create Neutron networks:

$ openstack network create --external --provider-physical-network datacentre --provider-network-type flat public
$ openstack network create --internal private
$ openstack subnet create public-net \
    --subnet-range $PUBLIC_NETWORK_CIDR \
    --gateway $GATEWAY \
    --allocation-pool start=$PUBLIC_NET_START,end=$PUBLIC_NET_END \
    --network public \
    --host-route destination=0.0.0.0/0,gateway=$GATEWAY \
    --dns-nameserver $DNS_SERVER

Launch the instance:

$ openstack server create --flavor tiny --image cirros --key-name default --network public --security-group basic myserver

Test SSH:

ssh cirros@<VM_IP>

Replace VM_IP with the address of the virtual machine that you create in the previous step.

Create configuration helper variables:

# standalone with project networking and provider networking
export OS_CLOUD=standalone
export GATEWAY=192.168.25.1
export STANDALONE_HOST=192.168.0.2
export PUBLIC_NETWORK_CIDR=192.168.25.0/24
export PRIVATE_NETWORK_CIDR=192.168.100.0/24
export PUBLIC_NET_START=192.168.25.3
export PUBLIC_NET_END=192.168.25.254
export DNS_SERVER=1.1.1.1

Create a basic flavor:

$ openstack flavor create --ram 512 --disk 1 --vcpu 1 --public tiny

Download CirrOS and create an OpenStack image:

$ wget https://download.cirros-cloud.net/0.4.0/cirros-0.4.0-x86_64-disk.img
$ openstack image create cirros --container-format bare --disk-format qcow2 --public --file cirros-0.4.0-x86_64-disk.img

Configure SSH:

$ ssh-keygen -m PEM -t rsa -b 2048 -f ~/.ssh/id_rsa_pem
$ openstack keypair create --public-key ~/.ssh/id_rsa_pem.pub default

Create a simple network security group:

$ openstack security group create basic

Configure the new network security group:

Create Neutron networks:

$ openstack network create --external --provider-physical-network datacentre --provider-network-type flat public
$ openstack network create --internal private
$ openstack subnet create public-net \
    --subnet-range $PUBLIC_NETWORK_CIDR \
    --no-dhcp \
    --gateway $GATEWAY \
    --allocation-pool start=$PUBLIC_NET_START,end=$PUBLIC_NET_END \
    --network public
$ openstack subnet create private-net \
    --subnet-range $PRIVATE_NETWORK_CIDR \
    --network private

Create a virtual router:

# NOTE: In this case an IP will be automatically assigned
# from the allocation pool for the subnet.
$ openstack router create vrouter
$ openstack router set vrouter --external-gateway public
$ openstack router add subnet vrouter private-net

Create a floating IP:

$ openstack floating ip create public

Launch the instance:

$ openstack server create --flavor tiny --image cirros --key-name default --network private --security-group basic myserver

Assign the floating IP:

$ openstack server add floating ip myserver <FLOATING_IP>

Replace FLOATING_IP with the address of the floating IP that you create in a previous step.

Test SSH:

ssh cirros@<FLOATING_IP>

Replace FLOATING_IP with the address of the floating IP that you create in a previous step.