Chapter 5. Working with containerized services

Red Hat OpenStack Platform (RHOSP) runs services in containers on the undercloud and overcloud nodes. In certain situations, you might need to control the individual services on a host. This section contains information about some common commands you can run on a node to manage containerized services.

$ sudo podman ps

To include stopped or failed containers in the command output, add the --all option to the command:

$ sudo podman ps --all

To list container images, run the following command:

$ sudo podman images

$ sudo podman inspect keystone

To check a container status, run the systemctl status command:

$ sudo systemctl status tripleo_keystone
● tripleo_keystone.service - keystone container
   Loaded: loaded (/etc/systemd/system/tripleo_keystone.service; enabled; vendor preset: disabled)
   Active: active (running) since Fri 2019-02-15 23:53:18 UTC; 2 days ago
 Main PID: 29012 (podman)
   CGroup: /system.slice/tripleo_keystone.service
           └─29012 /usr/bin/podman start -a keystone

To stop a container, run the systemctl stop command:

$ sudo systemctl stop tripleo_keystone

To start a container, run the systemctl start command:

$ sudo systemctl start tripleo_keystone

To restart a container, run the systemctl restart command:

$ sudo systemctl restart tripleo_keystone

Because no daemon monitors the containers status, Systemd automatically restarts most containers in these situations:

For more information about Systemd services, see the systemd.service documentation.

To list all OpenStack Platform containers timers, run the systemctl list-timers command and limit the output to lines containing tripleo:

$ sudo systemctl list-timers | grep tripleo
Mon 2019-02-18 20:18:30 UTC  1s left       Mon 2019-02-18 20:17:26 UTC  1min 2s ago  tripleo_nova_metadata_healthcheck.timer            tripleo_nova_metadata_healthcheck.service
Mon 2019-02-18 20:18:33 UTC  4s left       Mon 2019-02-18 20:17:03 UTC  1min 25s ago tripleo_mistral_engine_healthcheck.timer           tripleo_mistral_engine_healthcheck.service
Mon 2019-02-18 20:18:34 UTC  5s left       Mon 2019-02-18 20:17:23 UTC  1min 5s ago  tripleo_keystone_healthcheck.timer                 tripleo_keystone_healthcheck.service
Mon 2019-02-18 20:18:35 UTC  6s left       Mon 2019-02-18 20:17:13 UTC  1min 15s ago tripleo_memcached_healthcheck.timer                tripleo_memcached_healthcheck.service
(...)

To check the status of a specific container timer, run the systemctl status command for the healthcheck service:

$ sudo systemctl status tripleo_keystone_healthcheck.service
● tripleo_keystone_healthcheck.service - keystone healthcheck
   Loaded: loaded (/etc/systemd/system/tripleo_keystone_healthcheck.service; disabled; vendor preset: disabled)
   Active: inactive (dead) since Mon 2019-02-18 20:22:46 UTC; 22s ago
  Process: 115581 ExecStart=/usr/bin/podman exec keystone /openstack/healthcheck (code=exited, status=0/SUCCESS)
 Main PID: 115581 (code=exited, status=0/SUCCESS)

Feb 18 20:22:46 undercloud.localdomain systemd[1]: Starting keystone healthcheck...
Feb 18 20:22:46 undercloud.localdomain podman[115581]: {"versions": {"values": [{"status": "stable", "updated": "2019-01-22T00:00:00Z", "..."}]}]}}
Feb 18 20:22:46 undercloud.localdomain podman[115581]: 300 192.168.24.1:35357 0.012 seconds
Feb 18 20:22:46 undercloud.localdomain systemd[1]: Started keystone healthcheck.

To stop, start, restart, and show the status of a container timer, run the relevant systemctl command against the .timer Systemd resource. For example, to check the status of the tripleo_keystone_healthcheck.timer resource, run the following command:

$ sudo systemctl status tripleo_keystone_healthcheck.timer
● tripleo_keystone_healthcheck.timer - keystone container healthcheck
   Loaded: loaded (/etc/systemd/system/tripleo_keystone_healthcheck.timer; enabled; vendor preset: disabled)
   Active: active (waiting) since Fri 2019-02-15 23:53:18 UTC; 2 days ago

If the healthcheck service is disabled but the timer for that service is present and enabled, it means that the check is currently timed out, but will be run according to timer. You can also start the check manually.

Paunch and the container-puppet.py script configure podman containers to push their outputs to the /var/log/containers/stdout directory, which creates a collection of all logs, even for the deleted containers, such as container-puppet-* containers.

The host also applies log rotation to this directory, which prevents huge files and disk space issues.

In case a container is replaced, the new container outputs to the same log file, because podman uses the container name instead of container ID.

You can also check the logs for a containerized service with the podman logs command. For example, to view the logs for the keystone container, run the following command:

$ sudo podman logs keystone

$ sudo podman exec -it keystone /bin/bash

To enter the shell for the keystone container as the root user, run the following command:

$ sudo podman exec --user 0 -it <NAME OR ID> /bin/bash

To exit the container, run the following command:

# exit

If a containerized service fails during or after overcloud deployment, use the following recommendations to determine the root cause for the failure:

$ sudo podman logs keystone

In most cases, this log provides the cause of a container’s failure.

$ sudo podman inspect keystone

This provides a JSON object containing low-level configuration data. You can pipe the output to the jq command to parse specific data. For example, to view the container mounts for the keystone container, run the following command:

$ sudo podman inspect keystone | jq .[0].Mounts

You can also use the --format option to parse data to a single line, which is useful for running commands against sets of container data. For example, to recreate the options used to run the keystone container, use the following inspect command with the --format option:

$ sudo podman inspect --format='{{range .Config.Env}} -e "{{.}}" {{end}} {{range .Mounts}} -v {{.Source}}:{{.Destination}}{{if .Mode}}:{{.Mode}}{{end}}{{end}} -ti {{.Config.Image}}' keystone

Use these options in conjunction with the podman run command to recreate the container for troubleshooting purposes:

$ OPTIONS=$( sudo podman inspect --format='{{range .Config.Env}} -e "{{.}}" {{end}} {{range .Mounts}} -v {{.Source}}:{{.Destination}}{{if .Mode}}:{{.Mode}}{{end}}{{end}} -ti {{.Config.Image}}' keystone )
$ sudo podman run --rm $OPTIONS /bin/bash

$ sudo podman exec -ti keystone <COMMAND>

Replace <COMMAND> with your desired command. For example, each container has a health check script to verify the service connection. You can run the health check script for keystone with the following command:

$ sudo podman exec -ti keystone /openstack/healthcheck

To access the container’s shell, run podman exec using /bin/bash as the command:

$ sudo podman exec -ti keystone /bin/bash

$ sudo podman export keystone -o keystone.tar

This command create the keystone.tar archive, which you can extract and explore.