Chapter 18. Configuring custom SSL/TLS certificates
You can configure the undercloud to use SSL/TLS for communication over public endpoints. However, if want to you use a SSL certificate with your own certificate authority, you must complete the following configuration steps.
18.1. Initializing the signing host
The signing host is the host that generates and signs new certificates with a certificate authority. If you have never created SSL certificates on the chosen signing host, you might need to initialize the host so that it can sign new certificates.
/etc/pki/CA/index.txtfile contains records of all signed certificates. Check if this file exists. If it does not exist, create an empty file:
$ sudo touch /etc/pki/CA/index.txt
/etc/pki/CA/serialfile identifies the next serial number to use for the next certificate to sign. Check if this file exists. If the file does not exist, create a new file with a new starting value:
$ echo '1000' | sudo tee /etc/pki/CA/serial
18.2. Creating a certificate authority
Normally you sign your SSL/TLS certificates with an external certificate authority. In some situations, you might want to use your own certificate authority. For example, you might want to have an internal-only certificate authority.
- Generate a key and certificate pair to act as the certificate authority:
$ openssl genrsa -out ca.key.pem 4096 $ openssl req -key ca.key.pem -new -x509 -days 7300 -extensions v3_ca -out ca.crt.pem
openssl reqcommand requests certain details about your authority. Enter these details at the prompt.
These commands create a certificate authority file called
18.3. Adding the certificate authority to clients
For any external clients aiming to communicate using SSL/TLS, copy the certificate authority file to each client that requires access to your Red Hat OpenStack Platform environment.
Copy the certificate authority to the client system:
$ sudo cp ca.crt.pem /etc/pki/ca-trust/source/anchors/
After you copy the certificate authority file to each client, run the following command on each client to add the certificate to the certificate authority trust bundle:
$ sudo update-ca-trust extract
18.4. Creating an SSL/TLS key
Enabling SSL/TLS on an OpenStack environment requires an SSL/TLS key to generate your certificates.
Run the following command to generate the SSL/TLS key (
$ openssl genrsa -out server.key.pem 2048
18.5. Creating an SSL/TLS certificate signing request
Complete the following steps to create a certificate signing request.
Copy the default OpenSSL configuration file:
$ cp /etc/pki/tls/openssl.cnf .
Edit the new
openssl.cnffile and configure the SSL parameters that you want to use for director. An example of the types of parameters to modify include:
[req] distinguished_name = req_distinguished_name req_extensions = v3_req [req_distinguished_name] countryName = Country Name (2 letter code) countryName_default = AU stateOrProvinceName = State or Province Name (full name) stateOrProvinceName_default = Queensland localityName = Locality Name (eg, city) localityName_default = Brisbane organizationalUnitName = Organizational Unit Name (eg, section) organizationalUnitName_default = Red Hat commonName = Common Name commonName_default = 192.168.0.1 commonName_max = 64 [ v3_req ] # Extensions to add to a certificate request basicConstraints = CA:FALSE keyUsage = nonRepudiation, digitalSignature, keyEncipherment subjectAltName = @alt_names [alt_names] IP.1 = 192.168.0.1 DNS.1 = instack.localdomain DNS.2 = vip.localdomain DNS.3 = 192.168.0.1
commonName_defaultto one of the following entries:
If you are using an IP address to access director over SSL/TLS, use the
undercloud_public_hostparameter in the
If you are using a fully qualified domain name to access director over SSL/TLS, use the domain name.
subjectAltName = @alt_namesto the
alt_namessection to include the following entries:
IP- A list of IP addresses that clients use to access director over SSL.
DNS- A list of domain names that clients use to access director over SSL. Also include the Public API IP address as a DNS entry at the end of the
For more information about
openssl.cnf, run the
- If you are using an IP address to access director over SSL/TLS, use the
Run the following command to generate a certificate signing request (
$ openssl req -config openssl.cnf -key server.key.pem -new -out server.csr.pem
Ensure that you include your OpenStack SSL/TLS key with the
This command generates a
server.csr.pem file, which is the certificate signing request. Use this file to create your OpenStack SSL/TLS certificate.
18.6. Creating the SSL/TLS certificate
To generate the SSL/TLS certificate for your OpenStack environment, the following files must be present:
- The customized configuration file that specifies the v3 extensions.
- The certificate signing request to generate and sign the certificate with a certificate authority.
- The certificate authority, which signs the certificate.
- The certificate authority private key.
Run the following command to create a certificate for your undercloud or overcloud:
$ sudo openssl ca -config openssl.cnf -extensions v3_req -days 3650 -in server.csr.pem -out server.crt.pem -cert ca.crt.pem -keyfile ca.key.pem
This command uses the following options:
Use a custom configuration file, which is the
openssl.cnffile with v3 extensions.
- Enabled v3 extensions.
- Defines how long in days until the certificate expires.
- The certificate signing request.
- The resulting signed certificate.
- The certificate authority file.
- The certificate authority private key.
This command creates a new certificate named
server.crt.pem. Use this certificate in conjunction with your OpenStack SSL/TLS key
18.7. Adding the certificate to the undercloud
Complete the following steps to add your OpenStack SSL/TLS certificate to the undercloud trust bundle.
Run the following command to combine the certificate and key:
$ cat server.crt.pem server.key.pem > undercloud.pem
This command creates a
undercloud.pemfile to a location within your
/etc/pkidirectory and set the necessary SELinux context so that HAProxy can read it:
$ sudo mkdir /etc/pki/undercloud-certs $ sudo cp ~/undercloud.pem /etc/pki/undercloud-certs/. $ sudo semanage fcontext -a -t etc_t "/etc/pki/undercloud-certs(/.*)?" $ sudo restorecon -R /etc/pki/undercloud-certs
undercloud.pemfile location to the
undercloud_service_certificateoption in the
undercloud_service_certificate = /etc/pki/undercloud-certs/undercloud.pem
Add the certificate authority that signed the certificate to the list of trusted Certificate Authorities on the undercloud so that different services within the undercloud have access to the certificate authority:
$ sudo cp ca.crt.pem /etc/pki/ca-trust/source/anchors/ $ sudo update-ca-trust extract