Chapter 77. stack

<stack>

Name or id of stack to abandon

-h, --help

Show this help message and exit

--output-file <output-file>

File to output abandon results

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to json

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack-name>

Name of the stack to adopt

-h, --help

Show this help message and exit

-e <environment>, --environment <environment>

Path to the environment. can be specified multiple times

--timeout <timeout>

Stack creation timeout in minutes

--enable-rollback

Enable rollback on create/update failure

--parameter <key=value>

Parameter values used to create the stack. can be specified multiple times

--wait

Wait until stack adopt completes

--adopt-file <adopt-file>

Path to adopt stack data file

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Stack(s) to cancel (name or id)

-h, --help

Show this help message and exit

--wait

Wait for cancel to complete

--no-rollback

Cancel without rollback

output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Stack(s) to check update (name or id)

-h, --help

Show this help message and exit

--wait

Wait for check to complete

output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack-name>

Name of the stack to create

-h, --help

Show this help message and exit

-e <environment>, --environment <environment>

Path to the environment. can be specified multiple times

--timeout <timeout>

Stack creating timeout in minutes

--pre-create <resource>

Name of a resource to set a pre-create hook to. Resources in nested stacks can be set using slash as a separator: ``nested_stack/another/my_resource``. You can use wildcards to match multiple stacks or resources: ``nested_stack/an*/*_resource``. This can be specified multiple times

--enable-rollback

Enable rollback on create/update failure

--parameter <key=value>

Parameter values used to create the stack. this can be specified multiple times

--parameter-file <key=file>

Parameter values from file used to create the stack. This can be specified multiple times. Parameter values would be the content of the file

--wait

Wait until stack goes to create_complete or CREATE_FAILED

--tags <tag1,tag2…​>

A list of tags to associate with the stack

--dry-run

Do not actually perform the stack create, but show what would be created

-t <template>, --template <template>

Path to the template

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Stack(s) to delete (name or id)

-h, --help

Show this help message and exit

-y, --yes

Skip yes/no prompt (assume yes)

--wait

Wait for stack delete to complete

<NAME or ID>

Name or id of stack to query

-h, --help

Show this help message and exit

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to yaml

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Name or id of stack to show events for

-h, --help

Show this help message and exit

--resource <resource>

Name of resource to show events for. note: this cannot be specified with --nested-depth

--filter <key=value>

Filter parameters to apply on returned events

--limit <limit>

Limit the number of events returned

--marker <id>

Only return events that appear after the given id

--nested-depth <depth>

Depth of nested stacks from which to display events. Note: this cannot be specified with --resource

--sort <key>[:<direction>]

Sort output by selected keys and directions (asc or desc) (default: asc). Specify multiple times to sort on multiple keys. Sort key can be: "event_time" (default), "resource_name", "links", "logical_resource_id", "resource_status", "resource_status_reason", "physical_resource_id", or "id". You can leave the key empty and specify ":desc" for sorting by reverse time.

--follow

Print events until process is halted

output formatter options-f {csv,json,log,table,value,yaml}, --format {csv,json,log,table,value,yaml}

The output format, defaults to log

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Name or id of stack to show events for

<resource>

Name of the resource event belongs to

<event>

Id of event to display details for

-h, --help

Show this help message and exit

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Name or id of stack to export

-h, --help

Show this help message and exit

--output-file <output-file>

File to output export data

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to json

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Stack to display (name or id)

-h, --help

Show this help message and exit

--long

Show full deployment logs in output

<NAME or ID>

Name or id of stack to query

-h, --help

Show this help message and exit

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to yaml

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Stack to display (name or id)

<resource>

Resource names with hooks to clear. resources in nested stacks can be set using slash as a separator: ``nested_stack/another/my_resource``. You can use wildcards to match multiple stacks or resources: ``nested_stack/an*/*_resource``

-h, --help

Show this help message and exit

--pre-create

Clear the pre-create hooks

--pre-update

Clear the pre-update hooks

--pre-delete

Clear the pre-delete hooks

<stack>

Stack to display (name or id)

-h, --help

Show this help message and exit

--nested-depth <nested-depth>

Depth of nested stacks from which to display hooks

output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

-h, --help

Show this help message and exit

--deleted

Include soft-deleted stacks in the stack listing

--nested

Include nested stacks in the stack listing

--hidden

Include hidden stacks in the stack listing

--property <key=value>

Filter properties to apply on returned stacks (repeat to filter on multiple properties)

--tags <tag1,tag2…​>

List of tags to filter by. can be combined with --tag- mode to specify how to filter tags

--tag-mode <mode>

Method of filtering tags. must be one of "any", "not", or "not-any". If not specified, multiple tags will be combined with the boolean AND expression

--limit <limit>

The number of stacks returned

--marker <id>

Only return stacks that appear after the given id

--sort <key>[:<direction>]

Sort output by selected keys and directions (asc or desc) (default: asc). Specify multiple times to sort on multiple properties

--all-projects

Include all projects (admin only)

--short

List fewer fields in output

--long

List additional fields in output, this is implied by --all-projects

output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Name or id of stack to query

-h, --help

Show this help message and exit

output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Name or id of stack to query

<output>

Name of an output to display

-h, --help

Show this help message and exit

--all

Display all stack outputs

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Name or id of stack to query

-h, --help

Show this help message and exit

--long

Enable detailed information presented for each resource in resource list

-n <nested-depth>, --nested-depth <nested-depth>

Depth of nested stacks from which to display resources

--filter <key=value>

Filter parameters to apply on returned resources based on their name, status, type, action, id and physical_resource_id

output formatter options-f {csv,dot,json,table,value,yaml}, --format {csv,dot,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Name or id of stack the resource belongs to

<resource>

Name of the resource

reason

Reason for state change

-h, --help

Show this help message and exit

--reset

Set the resource as healthy

<stack>

Stack to display (name or id)

<resource>

Name of the resource to show the metadata for

-h, --help

Show this help message and exit

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to json

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Name or id of stack to query

<resource>

Name of resource

-h, --help

Show this help message and exit

--with-attr <attribute>

Attribute to show, can be specified multiple times

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Name or id of stack the resource belongs to

<resource>

Name of the resoure to signal

-h, --help

Show this help message and exit

--data <data>

Json data to send to the signal handler

--data-file <data-file>

File containing json data to send to the signal handler

<stack>

Stack(s) to resume (name or id)

-h, --help

Show this help message and exit

--wait

Wait for resume to complete

output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Stack to display (name or id)

-h, --help

Show this help message and exit

--no-resolve-outputs

Do not resolve outputs of the stack.

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Name or id of stack

-h, --help

Show this help message and exit

--name <name>

Name of snapshot

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Name or id of stack

<snapshot>

Id of stack snapshot

-h, --help

Show this help message and exit

-y, --yes

Skip yes/no prompt (assume yes)

<stack>

Name or id of stack containing the snapshots

-h, --help

Show this help message and exit

output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Name or id of stack containing the snapshot

<snapshot>

Id of the snapshot to restore

-h, --help

Show this help message and exit

<stack>

Name or id of stack containing the snapshot

<snapshot>

Id of the snapshot to show

-h, --help

Show this help message and exit

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to yaml

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Stack(s) to suspend (name or id)

-h, --help

Show this help message and exit

--wait

Wait for suspend to complete

output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Name or id of stack to query

-h, --help

Show this help message and exit

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to yaml

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<stack>

Name or id of stack to update

-h, --help

Show this help message and exit

-t <template>, --template <template>

Path to the template

-e <environment>, --environment <environment>

Path to the environment. can be specified multiple times

--pre-update <resource>

Name of a resource to set a pre-update hook to. Resources in nested stacks can be set using slash as a separator: ``nested_stack/another/my_resource``. You can use wildcards to match multiple stacks or resources: ``nested_stack/an*/*_resource``. This can be specified multiple times

--timeout <timeout>

Stack update timeout in minutes

--rollback <value>

Set rollback on update failure. value "enabled" sets rollback to enabled. Value "disabled" sets rollback to disabled. Value "keep" uses the value of existing stack to be updated (default)

--dry-run

Do not actually perform the stack update, but show what would be changed

--show-nested

Show nested stacks when performing --dry-run

--parameter <key=value>

Parameter values used to create the stack. this can be specified multiple times

--parameter-file <key=file>

Parameter values from file used to create the stack. This can be specified multiple times. Parameter value would be the content of the file

--existing

Re-use the template, parameters and environment of the current stack. If the template argument is omitted then the existing template is used. If no --environment is specified then the existing environment is used. Parameters specified in --parameter will patch over the existing values in the current stack. Parameters omitted will keep the existing values

--clear-parameter <parameter>

Remove the parameters from the set of parameters of current stack for the stack-update. The default value in the template will be used. This can be specified multiple times

--tags <tag1,tag2…​>

An updated list of tags to associate with the stack

--wait

Wait until stack goes to update_complete or UPDATE_FAILED

--converge

Stack update with observe on reality.

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.