Configuration Reference

Red Hat OpenStack Platform 13

Configuring Red Hat OpenStack Platform environments

OpenStack Documentation Team

OpenStack Documentation Team

Abstract

This document is for system administrators who want to look up configuration options. It contains lists of configuration options available with OpenStack and uses auto-generation to generate options and the descriptions from the code for each project.

Preface

This document describes the options available in the configuration files for each of the major services in Red Hat OpenStack Platform. The content is automatically generated based on the values in the configuration files themselves, and is provided for reference purposes only.

Warning

Manually editing configuration files is not supported. All configuration changes must be made through the Director. Red Hat provides this guide as a technical reference only.

Chapter 1. barbican

The following chapter contains information about the configuration options in the barbican service.

1.1. barbican.conf

This section contains options for the /etc/barbican/barbican.conf file.

1.1.1. DEFAULT

The following table outlines the options available under the [DEFAULT] group in the /etc/barbican/barbican.conf file.

Table 1.1. DEFAULT

Configuration option = Default valueTypeDescription

admin_role = admin

string value

Role used to identify an authenticated user as administrator.

allow_anonymous_access = False

boolean value

Allow unauthenticated users to access the API with read-only privileges. This only applies when using ContextMiddleware.

api_paste_config = api-paste.ini

string value

File name for the paste.deploy config for api service

backdoor_port = None

string value

Enable eventlet backdoor. Acceptable values are 0, <port>, and <start>:<end>, where 0 results in listening on a random tcp port number; <port> results in listening on the specified port number (and not enabling backdoor if that port is in use); and <start>:<end> results in listening on the smallest unused port number within the specified range of port numbers. The chosen port is displayed in the service’s log file.

backdoor_socket = None

string value

Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is mutually exclusive with backdoor_port in that only one should be provided. If both are provided then the existence of this option overrides the usage of that option.

client_socket_timeout = 900

integer value

Timeout for client connections' socket operations. If an incoming connection is idle for this number of seconds it will be closed. A value of 0 means wait forever.

conn_pool_min_size = 2

integer value

The pool size limit for connections expiration policy

conn_pool_ttl = 1200

integer value

The time-to-live in sec of idle connections in the pool

control_exchange = openstack

string value

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

db_auto_create = True

boolean value

Create the Barbican database on service startup.

debug = False

boolean value

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

default_limit_paging = 10

integer value

Default page size for the limit paging URL parameter.

default_log_levels = [u'amqp=WARN', u'amqplib=WARN', u'boto=WARN', u'qpid=WARN', u'sqlalchemy=WARN', u'suds=INFO', u'oslo.messaging=INFO', u'oslo_messaging=INFO', u'iso8601=WARN', u'requests.packages.urllib3.connectionpool=WARN', u'urllib3.connectionpool=WARN', u'websocket=WARN', u'requests.packages.urllib3.util.retry=WARN', u'urllib3.util.retry=WARN', u'keystonemiddleware=WARN', u'routes.middleware=WARN', u'stevedore=WARN', u'taskflow=WARN', u'keystoneauth=WARN', u'oslo.cache=INFO', u'dogpile.core.dogpile=INFO']

list value

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

executor_thread_pool_size = 64

integer value

Size of executor thread pool when executor is threading or eventlet.

fatal_deprecations = False

boolean value

Enables or disables fatal status of deprecations.

host_href = http://localhost:9311

string value

Host name, for use in HATEOAS-style references Note: Typically this would be the load balanced endpoint that clients would use to communicate back with this service. If a deployment wants to derive host from wsgi request instead then make this blank. Blank is needed to override default config value which is http://localhost:9311

`instance_format = [instance: %(uuid)s] `

string value

The format for an instance that is passed with the log message.

`instance_uuid_format = [instance: %(uuid)s] `

string value

The format for an instance UUID that is passed with the log message.

log-config-append = None

string value

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, logging_context_format_string).

log-date-format = %Y-%m-%d %H:%M:%S

string value

Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.

log-dir = None

string value

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

log-file = None

string value

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

string value

Format string to use for log messages with context.

logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d

string value

Additional data to append to log message when logging level for the message is DEBUG.

logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

string value

Format string to use for log messages when context is undefined.

logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

string value

Prefix each line of exception output with this format.

logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

string value

Defines the format string for %(user_identity)s that is used in logging_context_format_string.

max_allowed_request_size_in_bytes = 15000

integer value

Maximum allowed http request size against the barbican-api.

max_allowed_secret_in_bytes = 10000

integer value

Maximum allowed secret size in bytes.

max_header_line = 16384

integer value

Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens (typically those generated when keystone is configured to use PKI tokens with big service catalogs).

max_limit_paging = 100

integer value

Maximum page size for the limit paging URL parameter.

publish_errors = False

boolean value

Enables or disables publication of error events.

rate_limit_burst = 0

integer value

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level = CRITICAL

string value

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

rate_limit_interval = 0

integer value

Interval, number of seconds, of log rate limiting.

rpc_ack_timeout_base = 15

integer value

Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.

rpc_ack_timeout_multiplier = 2

integer value

Number to multiply base ack timeout by after each retry attempt.

rpc_backend = rabbit

string value

The messaging driver to use, defaults to rabbit. Other drivers include amqp and zmq.

rpc_conn_pool_size = 30

integer value

Size of RPC connection pool.

rpc_message_ttl = 300

integer value

Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server.

rpc_poll_timeout = 1

integer value

The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.

rpc_response_timeout = 60

integer value

Seconds to wait for a response from a call.

rpc_retry_attempts = 3

integer value

Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries, None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled.

rpc_thread_pool_size = 100

integer value

Maximum number of (green) threads to work concurrently.

rpc_use_acks = False

boolean value

Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB.

rpc_zmq_bind_address = *

string value

ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or resolve to this address.

rpc_zmq_bind_port_retries = 100

integer value

Number of retries to find free port number before fail with ZMQBindError.

rpc_zmq_contexts = 1

integer value

Number of ZeroMQ contexts, defaults to 1.

rpc_zmq_host = ccsosp-undercloud.usersys.redhat.com

string value

Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova.

rpc_zmq_ipc_dir = /var/run/openstack

string value

Directory for holding IPC sockets.

rpc_zmq_matchmaker = redis

string value

MatchMaker driver.

rpc_zmq_max_port = 65536

integer value

Maximal port number for random ports range.

rpc_zmq_min_port = 49153

port value

Minimal port number for random ports range.

rpc_zmq_serialization = json

string value

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

rpc_zmq_topic_backlog = None

integer value

Maximum number of ingress messages to locally buffer per topic. Default is unlimited.

run_external_periodic_tasks = True

boolean value

Some periodic tasks can be run in a separate process. Should we run them here?

sql_connection = sqlite:///barbican.sqlite

string value

SQLAlchemy connection string for the reference implementation registry server. Any valid SQLAlchemy connection string is fine. See: http://www.sqlalchemy.org/docs/05/reference/sqlalchemy/connections.html#sqlalchemy.create_engine. Note: For absolute addresses, use //// slashes after sqlite:.

sql_idle_timeout = 3600

integer value

Period in seconds after which SQLAlchemy should reestablish its connection to the database. MySQL uses a default wait_timeout of 8 hours, after which it will drop idle connections. This can result in MySQL Gone Away exceptions. If you notice this, you can lower this value to ensure that SQLAlchemy reconnects before MySQL can drop the connection.

sql_max_retries = 60

integer value

Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.

sql_pool_class = QueuePool

string value

Accepts a class imported from the sqlalchemy.pool module, and handles the details of building the pool for you. If commented out, SQLAlchemy will select based on the database dialect. Other options are QueuePool (for SQLAlchemy-managed connections) and NullPool (to disabled SQLAlchemy management of connections). See http://docs.sqlalchemy.org/en/latest/core/pooling.html for more details

sql_pool_logging = False

boolean value

Show SQLAlchemy pool-related debugging output in logs (sets DEBUG log level output) if specified.

sql_pool_max_overflow = 10

integer value

The maximum overflow size of the pool used by SQLAlchemy. When the number of checked-out connections reaches the size set in sql_pool_size, additional connections will be returned up to this limit. It follows then that the total number of simultaneous connections the pool will allow is sql_pool_size + sql_pool_max_overflow. Can be set to -1 to indicate no overflow limit, so no limit will be placed on the total number of concurrent connections. Comment out to allow SQLAlchemy to select the default.

sql_pool_size = 5

integer value

Size of pool used by SQLAlchemy. This is the largest number of connections that will be kept persistently in the pool. Can be set to 0 to indicate no size limit. To disable pooling, use a NullPool with sql_pool_class instead. Comment out to allow SQLAlchemy to select the default.

sql_retry_interval = 1

integer value

Interval between retries of opening a SQL connection.

subscribe_on = []

list value

List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the matchmaker.

syslog-log-facility = LOG_USER

string value

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

tcp_keepidle = 600

integer value

Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not supported on OS X.

transport_url = None

string value

The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:

driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query

Example: rabbit://rabbitmq:password@127.0.0.1:5672//

For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html

use-journal = False

boolean value

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

use-json = False

boolean value

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use-syslog = False

boolean value

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_dynamic_connections = False

boolean value

This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct connections for direct message types (ignored otherwise).

use_pub_sub = False

boolean value

Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.

use_router_proxy = False

boolean value

Use ROUTER remote proxy.

use_stderr = False

boolean value

Log output to standard error. This option is ignored if log_config_append is set.

watch-log-file = False

boolean value

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

wsgi_default_pool_size = 100

integer value

Size of the pool of greenthreads used by wsgi

wsgi_keep_alive = True

boolean value

If False, closes the client socket connection explicitly.

wsgi_log_format = %(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f

string value

A python format string that is used as the template to generate log lines. The following values can beformatted into it: client_ip, date_time, request_line, status_code, body_length, wall_seconds.

zmq_failover_connections = 2

integer value

How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.

zmq_immediate = True

boolean value

This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it.

zmq_linger = -1

integer value

Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Positive values specify an upper bound for the linger period.

zmq_target_expire = 300

integer value

Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).

zmq_target_update = 180

integer value

Update period in seconds of a name service record about existing target.

zmq_tcp_keepalive = -1

integer value

Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively.

zmq_tcp_keepalive_cnt = -1

integer value

The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_idle = -1

integer value

The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_intvl = -1

integer value

The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

1.1.2. certificate

The following table outlines the options available under the [certificate] group in the /etc/barbican/barbican.conf file.

Table 1.2. certificate

Configuration option = Default valueTypeDescription

enabled_certificate_plugins = [u'simple_certificate']

multi valued

List of certificate plugins to load.

namespace = barbican.certificate.plugin

string value

Extension namespace to search for plugins.

1.1.3. certificate_event

The following table outlines the options available under the [certificate_event] group in the /etc/barbican/barbican.conf file.

Table 1.3. certificate_event

Configuration option = Default valueTypeDescription

enabled_certificate_event_plugins = [u'simple_certificate_event']

multi valued

List of certificate plugins to load.

namespace = barbican.certificate.event.plugin

string value

Extension namespace to search for eventing plugins.

1.1.4. cors

The following table outlines the options available under the [cors] group in the /etc/barbican/barbican.conf file.

Table 1.4. cors

Configuration option = Default valueTypeDescription

allow_credentials = True

boolean value

Indicate that the actual request can include user credentials

allow_headers = [u'X-Auth-Token', u'X-Openstack-Request-Id', u'X-Project-Id', u'X-Identity-Status', u'X-User-Id', u'X-Storage-Token', u'X-Domain-Id', u'X-User-Domain-Id', u'X-Project-Domain-Id', u'X-Roles']

list value

Indicate which header field names may be used during the actual request.

allow_methods = [u'GET', u'PUT', u'POST', u'DELETE', u'PATCH']

list value

Indicate which methods can be used during the actual request.

allowed_origin = None

list value

Indicate whether this resource may be shared with the domain received in the requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing slash. Example: https://horizon.example.com

expose_headers = [u'X-Auth-Token', u'X-Openstack-Request-Id', u'X-Project-Id', u'X-Identity-Status', u'X-User-Id', u'X-Storage-Token', u'X-Domain-Id', u'X-User-Domain-Id', u'X-Project-Domain-Id', u'X-Roles']

list value

Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers.

max_age = 3600

integer value

Maximum cache age of CORS preflight requests.

1.1.5. crypto

The following table outlines the options available under the [crypto] group in the /etc/barbican/barbican.conf file.

Table 1.5. crypto

Configuration option = Default valueTypeDescription

enabled_crypto_plugins = [u'simple_crypto']

multi valued

List of crypto plugins to load.

namespace = barbican.crypto.plugin

string value

Extension namespace to search for plugins.

1.1.6. dogtag_plugin

The following table outlines the options available under the [dogtag_plugin] group in the /etc/barbican/barbican.conf file.

Table 1.6. dogtag_plugin

Configuration option = Default valueTypeDescription

auto_approved_profiles = caServerCert

string value

List of automatically approved enrollment profiles

ca_expiration_time = 1

string value

Time in days for CA entries to expire

dogtag_host = localhost

string value

Hostname for the Dogtag instance

dogtag_port = 8443

port value

Port for the Dogtag instance

nss_db_path = /etc/barbican/alias

string value

Path to the NSS certificate database

nss_password = None

string value

Password for the NSS certificate databases

pem_path = /etc/barbican/kra_admin_cert.pem

string value

Path to PEM file for authentication

plugin_name = Dogtag KRA

string value

User friendly plugin name

plugin_working_dir = /etc/barbican/dogtag

string value

Working directory for Dogtag plugin

retries = 3

integer value

Retries when storing or generating secrets

simple_cmc_profile = caOtherCert

string value

Profile for simple CMC requests

1.1.7. keystone_authtoken

The following table outlines the options available under the [keystone_authtoken] group in the /etc/barbican/barbican.conf file.

Table 1.7. keystone_authtoken

Configuration option = Default valueTypeDescription

auth_section = None

string value

Config Section from which to load plugin specific options

auth_type = None

string value

Authentication type to load

auth_uri = None

string value

Complete "public" Identity API endpoint. This endpoint should not be an "admin" endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint. This option is deprecated in favor of www_authenticate_uri and will be removed in the S release.

auth_version = None

string value

API version of the admin Identity API endpoint.

cache = None

string value

Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the memcached_servers option instead.

cafile = None

string value

A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs.

certfile = None

string value

Required if identity server requires client certificate

check_revocations_for_cached = False

boolean value

If true, the revocation list will be checked for cached tokens. This requires that PKI tokens are configured on the identity server.

delay_auth_decision = False

boolean value

Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.

enforce_token_bind = permissive

string value

Used to control the use and type of token binding. Can be set to: "disabled" to not check token binding. "permissive" (default) to validate binding information if the bind type is of a form known to the server and ignore it if not. "strict" like "permissive" but if the bind type is unknown the token will be rejected. "required" any form of token binding is needed to be allowed. Finally the name of a binding method that must be present in tokens.

hash_algorithms = [u'md5']

list value

Hash algorithms to use for hashing PKI tokens. This may be a single algorithm or multiple. The algorithms are those supported by Python standard hashlib.new(). The hashes will be tried in the order given, so put the preferred one first for performance. The result of the first hash will be stored in the cache. This will typically be set to multiple values only while migrating from a less secure algorithm to a more secure one. Once all the old tokens are expired this option should be set to a single value for better performance.

http_connect_timeout = None

integer value

Request timeout value for communicating with Identity API server.

http_request_max_retries = 3

integer value

How many times are we trying to reconnect when communicating with Identity API Server.

include_service_catalog = True

boolean value

(Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation and will not set the X-Service-Catalog header.

insecure = False

boolean value

Verify HTTPS connections.

keyfile = None

string value

Required if identity server requires client certificate

memcache_pool_conn_get_timeout = 10

integer value

(Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool.

memcache_pool_dead_retry = 300

integer value

(Optional) Number of seconds memcached server is considered dead before it is tried again.

memcache_pool_maxsize = 10

integer value

(Optional) Maximum total number of open connections to every memcached server.

memcache_pool_socket_timeout = 3

integer value

(Optional) Socket timeout in seconds for communicating with a memcached server.

memcache_pool_unused_timeout = 60

integer value

(Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed.

memcache_secret_key = None

string value

(Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation.

memcache_security_strategy = None

string value

(Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.

memcache_use_advanced_pool = False

boolean value

(Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x.

memcached_servers = None

list value

Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process.

region_name = None

string value

The region in which the identity server can be found.

revocation_cache_time = 10

integer value

Determines the frequency at which the list of revoked tokens is retrieved from the Identity service (in seconds). A high number of revocation events combined with a low cache duration may significantly reduce performance. Only valid for PKI tokens. This option has been deprecated in the Ocata release and will be removed in the P release.

service_token_roles = [u'service']

list value

A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check.

service_token_roles_required = False

boolean value

For backwards compatibility reasons we must let valid service tokens pass that don’t pass the service_token_roles check as valid. Setting this true will become the default in a future release and should be enabled if possible.

signing_dir = None

string value

Directory used to cache files related to PKI tokens. This option has been deprecated in the Ocata release and will be removed in the P release.

token_cache_time = 300

integer value

In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in seconds). Set to -1 to disable caching completely.

www_authenticate_uri = None

string value

Complete "public" Identity API endpoint. This endpoint should not be an "admin" endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint.

1.1.8. keystone_notifications

The following table outlines the options available under the [keystone_notifications] group in the /etc/barbican/barbican.conf file.

Table 1.8. keystone_notifications

Configuration option = Default valueTypeDescription

allow_requeue = False

boolean value

True enables requeue feature in case of notification processing error. Enable this only when underlying transport supports this feature.

control_exchange = openstack

string value

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

enable = False

boolean value

True enables keystone notification listener functionality.

thread_pool_size = 10

integer value

Define the number of max threads to be used for notification server processing functionality.

topic = notifications

string value

Keystone notification queue topic name. This name needs to match one of values mentioned in Keystone deployment’s notification_topics configuration e.g. notification_topics=notifications, barbican_notificationsMultiple servers may listen on a topic and messages will be dispatched to one of the servers in a round-robin fashion. That’s why Barbican service should have its own dedicated notification queue so that it receives all of Keystone notifications.

version = 1.0

string value

Version of tasks invoked via notifications

1.1.9. kmip_plugin

The following table outlines the options available under the [kmip_plugin] group in the /etc/barbican/barbican.conf file.

Table 1.9. kmip_plugin

Configuration option = Default valueTypeDescription

ca_certs = None

string value

File path to concatenated "certification authority" certificates

certfile = None

string value

File path to local client certificate

host = localhost

string value

Address of the KMIP server

keyfile = None

string value

File path to local client certificate keyfile

password = None

string value

Password for authenticating with KMIP server

pkcs1_only = False

boolean value

Only support PKCS#1 encoding of asymmetric keys

plugin_name = KMIP HSM

string value

User friendly plugin name

port = 5696

port value

Port for the KMIP server

ssl_version = PROTOCOL_TLSv1_2

string value

SSL version, maps to the module ssl’s constants

username = None

string value

Username for authenticating with KMIP server

1.1.10. matchmaker_redis

The following table outlines the options available under the [matchmaker_redis] group in the /etc/barbican/barbican.conf file.

Table 1.10. matchmaker_redis

Configuration option = Default valueTypeDescription

check_timeout = 20000

integer value

Time in ms to wait before the transaction is killed.

host = 127.0.0.1

string value

Host to locate redis.

`password = `

string value

Password for Redis server (optional).

port = 6379

port value

Use this port to connect to redis host.

sentinel_group_name = oslo-messaging-zeromq

string value

Redis replica set name.

sentinel_hosts = []

list value

List of Redis Sentinel hosts (fault tolerance mode), e.g., [host:port, host1:port …​ ]

socket_timeout = 10000

integer value

Timeout in ms on blocking socket operations.

wait_timeout = 2000

integer value

Time in ms to wait between connection attempts.

1.1.11. oslo_messaging_amqp

The following table outlines the options available under the [oslo_messaging_amqp] group in the /etc/barbican/barbican.conf file.

Table 1.11. oslo_messaging_amqp

Configuration option = Default valueTypeDescription

addressing_mode = dynamic

string value

Indicates the addressing mode used by the driver. Permitted values: legacy - use legacy non-routable addressing routable - use routable addresses dynamic - use legacy addresses if the message bus does not support routing otherwise use routable addressing

allow_insecure_clients = False

boolean value

Accept clients using either SSL or plain TCP

anycast_address = anycast

string value

Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.

broadcast_prefix = broadcast

string value

address prefix used when broadcasting to all servers

connection_retry_backoff = 2

integer value

Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.

connection_retry_interval = 1

integer value

Seconds to pause before attempting to re-connect.

connection_retry_interval_max = 30

integer value

Maximum limit for connection_retry_interval + connection_retry_backoff

container_name = None

string value

Name for the AMQP container. must be globally unique. Defaults to a generated UUID

default_notification_exchange = None

string value

Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else notify

default_notify_timeout = 30

integer value

The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.

default_reply_retry = 0

integer value

The maximum number of attempts to re-send a reply message which failed due to a recoverable error.

default_reply_timeout = 30

integer value

The deadline for an rpc reply message delivery.

default_rpc_exchange = None

string value

Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else rpc

default_send_timeout = 30

integer value

The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.

default_sender_link_timeout = 600

integer value

The duration to schedule a purge of idle sender links. Detach link after expiry.

group_request_prefix = unicast

string value

address prefix when sending to any server in group

idle_timeout = 0

integer value

Timeout for inactive connections (in seconds)

link_retry_delay = 10

integer value

Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.

multicast_address = multicast

string value

Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.

notify_address_prefix = openstack.org/om/notify

string value

Address prefix for all generated Notification addresses

notify_server_credit = 100

integer value

Window size for incoming Notification messages

`password = `

string value

Password for message broker authentication

pre_settled = [u'rpc-cast', u'rpc-reply']

multi valued

Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: rpc-call - send RPC Calls pre-settled rpc-reply- send RPC Replies pre-settled rpc-cast - Send RPC Casts pre-settled notify - Send Notifications pre-settled

pseudo_vhost = True

boolean value

Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private subnet per virtual host. Set to False if the message bus supports virtual hosting using the hostname field in the AMQP 1.0 Open performative as the name of the virtual host.

reply_link_credit = 200

integer value

Window size for incoming RPC Reply messages.

rpc_address_prefix = openstack.org/om/rpc

string value

Address prefix for all generated RPC addresses

rpc_server_credit = 100

integer value

Window size for incoming RPC Request messages

`sasl_config_dir = `

string value

Path to directory that contains the SASL configuration

`sasl_config_name = `

string value

Name of configuration file (without .conf suffix)

`sasl_default_realm = `

string value

SASL realm to use if no realm present in username

`sasl_mechanisms = `

string value

Space separated list of acceptable SASL mechanisms

server_request_prefix = exclusive

string value

address prefix used when sending to a specific server

ssl = False

boolean value

Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.

`ssl_ca_file = `

string value

CA certificate PEM file used to verify the server’s certificate

`ssl_cert_file = `

string value

Self-identifying certificate PEM file for client authentication

`ssl_key_file = `

string value

Private key PEM file used to sign ssl_cert_file certificate (optional)

ssl_key_password = None

string value

Password for decrypting ssl_key_file (if encrypted)

ssl_verify_vhost = False

boolean value

By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.

trace = False

boolean value

Debug: dump AMQP frames to stdout

unicast_address = unicast

string value

Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.

`username = `

string value

User name for message broker authentication

1.1.12. oslo_messaging_kafka

The following table outlines the options available under the [oslo_messaging_kafka] group in the /etc/barbican/barbican.conf file.

Table 1.12. oslo_messaging_kafka

Configuration option = Default valueTypeDescription

conn_pool_min_size = 2

integer value

The pool size limit for connections expiration policy

conn_pool_ttl = 1200

integer value

The time-to-live in sec of idle connections in the pool

consumer_group = oslo_messaging_consumer

string value

Group id for Kafka consumer. Consumers in one group will coordinate message consumption

kafka_consumer_timeout = 1.0

floating point value

Default timeout(s) for Kafka consumers

kafka_default_host = localhost

string value

Default Kafka broker Host

kafka_default_port = 9092

port value

Default Kafka broker Port

kafka_max_fetch_bytes = 1048576

integer value

Max fetch bytes of Kafka consumer

pool_size = 10

integer value

Pool Size for Kafka Consumers

producer_batch_size = 16384

integer value

Size of batch for the producer async send

producer_batch_timeout = 0.0

floating point value

Upper bound on the delay for KafkaProducer batching in seconds

1.1.13. oslo_messaging_notifications

The following table outlines the options available under the [oslo_messaging_notifications] group in the /etc/barbican/barbican.conf file.

Table 1.13. oslo_messaging_notifications

Configuration option = Default valueTypeDescription

driver = []

multi valued

The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop

retry = -1

integer value

The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite

topics = [u'notifications']

list value

AMQP topic used for OpenStack notifications.

transport_url = None

string value

A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.

1.1.14. oslo_messaging_rabbit

The following table outlines the options available under the [oslo_messaging_rabbit] group in the /etc/barbican/barbican.conf file.

Table 1.14. oslo_messaging_rabbit

Configuration option = Default valueTypeDescription

amqp_auto_delete = False

boolean value

Auto-delete queues in AMQP.

amqp_durable_queues = False

boolean value

Use durable queues in AMQP.

channel_max = None

integer value

Maximum number of channels to allow

connection_factory = single

string value

Connection factory implementation

default_notification_exchange = ${control_exchange}_notification

string value

Exchange name for sending notifications

default_notification_retry_attempts = -1

integer value

Reconnecting retry count in case of connectivity problem during sending notification, -1 means infinite retry.

default_rpc_exchange = ${control_exchange}_rpc

string value

Exchange name for sending RPC messages

default_rpc_retry_attempts = -1

integer value

Reconnecting retry count in case of connectivity problem during sending RPC message, -1 means infinite retry. If actual retry attempts in not 0 the rpc request could be processed more than one time

default_serializer_type = json

string value

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

fake_rabbit = False

boolean value

Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake

frame_max = None

integer value

The maximum byte size for an AMQP frame

heartbeat_interval = 3

integer value

How often to send heartbeats for consumer’s connections

heartbeat_rate = 2

integer value

How often times during the heartbeat_timeout_threshold we check the heartbeat.

heartbeat_timeout_threshold = 60

integer value

Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disable the heartbeat). EXPERIMENTAL

host_connection_reconnect_delay = 0.25

floating point value

Set delay for reconnection to some host which has connection error

kombu_compression = None

string value

EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.

kombu_failover_strategy = round-robin

string value

Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.

kombu_missing_consumer_retry_timeout = 60

integer value

How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.

kombu_reconnect_delay = 1.0

floating point value

How long to wait before reconnecting in response to an AMQP consumer cancel notification.

notification_listener_prefetch_count = 100

integer value

Max number of not acknowledged message which RabbitMQ can send to notification listener.

notification_persistence = False

boolean value

Persist notification messages.

notification_retry_delay = 0.25

floating point value

Reconnecting retry delay in case of connectivity problem during sending notification message

pool_max_overflow = 0

integer value

Maximum number of connections to create above pool_max_size.

pool_max_size = 30

integer value

Maximum number of connections to keep queued.

pool_recycle = 600

integer value

Lifetime of a connection (since creation) in seconds or None for no recycling. Expired connections are closed on acquire.

pool_stale = 60

integer value

Threshold at which inactive (since release) connections are considered stale in seconds or None for no staleness. Stale connections are closed on acquire.

pool_timeout = 30

integer value

Default number of seconds to wait for a connections to available

rabbit_ha_queues = False

boolean value

Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA ^(?!amq\.).* {"ha-mode": "all"} "

rabbit_host = localhost

string value

The RabbitMQ broker address where a single node is used.

rabbit_hosts = [u'$rabbit_host:$rabbit_port']

list value

RabbitMQ HA cluster host:port pairs.

rabbit_interval_max = 30

integer value

Maximum interval of RabbitMQ connection retries. Default is 30 seconds.

rabbit_login_method = AMQPLAIN

string value

The RabbitMQ login method.

rabbit_max_retries = 0

integer value

Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry count).

rabbit_password = guest

string value

The RabbitMQ password.

rabbit_port = 5672

port value

The RabbitMQ broker port where a single node is used.

rabbit_qos_prefetch_count = 0

integer value

Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.

rabbit_retry_backoff = 2

integer value

How long to backoff for between retries when connecting to RabbitMQ.

rabbit_retry_interval = 1

integer value

How frequently to retry connecting with RabbitMQ.

rabbit_transient_queues_ttl = 1800

integer value

Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.

rabbit_userid = guest

string value

The RabbitMQ userid.

rabbit_virtual_host = /

string value

The RabbitMQ virtual host.

rpc_listener_prefetch_count = 100

integer value

Max number of not acknowledged message which RabbitMQ can send to rpc listener.

rpc_queue_expiration = 60

integer value

Time to live for rpc queues without consumers in seconds.

rpc_reply_exchange = ${control_exchange}_rpc_reply

string value

Exchange name for receiving RPC replies

rpc_reply_listener_prefetch_count = 100

integer value

Max number of not acknowledged message which RabbitMQ can send to rpc reply listener.

rpc_reply_retry_attempts = -1

integer value

Reconnecting retry count in case of connectivity problem during sending reply. -1 means infinite retry during rpc_timeout

rpc_reply_retry_delay = 0.25

floating point value

Reconnecting retry delay in case of connectivity problem during sending reply.

rpc_retry_delay = 0.25

floating point value

Reconnecting retry delay in case of connectivity problem during sending RPC message

socket_timeout = 0.25

floating point value

Set socket timeout in seconds for connection’s socket

ssl = None

boolean value

Enable SSL

`ssl_ca_file = `

string value

SSL certification authority file (valid only if SSL enabled).

`ssl_cert_file = `

string value

SSL cert file (valid only if SSL enabled).

`ssl_key_file = `

string value

SSL key file (valid only if SSL enabled).

ssl_options = None

dict value

Arguments passed to ssl.wrap_socket

`ssl_version = `

string value

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

tcp_user_timeout = 0.25

floating point value

Set TCP_USER_TIMEOUT in seconds for connection’s socket

1.1.15. oslo_messaging_zmq

The following table outlines the options available under the [oslo_messaging_zmq] group in the /etc/barbican/barbican.conf file.

Table 1.15. oslo_messaging_zmq

Configuration option = Default valueTypeDescription

rpc_ack_timeout_base = 15

integer value

Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.

rpc_ack_timeout_multiplier = 2

integer value

Number to multiply base ack timeout by after each retry attempt.

rpc_message_ttl = 300

integer value

Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server.

rpc_poll_timeout = 1

integer value

The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.

rpc_retry_attempts = 3

integer value

Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries, None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled.

rpc_thread_pool_size = 100

integer value

Maximum number of (green) threads to work concurrently.

rpc_use_acks = False

boolean value

Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB.

rpc_zmq_bind_address = *

string value

ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or resolve to this address.

rpc_zmq_bind_port_retries = 100

integer value

Number of retries to find free port number before fail with ZMQBindError.

rpc_zmq_contexts = 1

integer value

Number of ZeroMQ contexts, defaults to 1.

rpc_zmq_host = ccsosp-undercloud.usersys.redhat.com

string value

Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova.

rpc_zmq_ipc_dir = /var/run/openstack

string value

Directory for holding IPC sockets.

rpc_zmq_matchmaker = redis

string value

MatchMaker driver.

rpc_zmq_max_port = 65536

integer value

Maximal port number for random ports range.

rpc_zmq_min_port = 49153

port value

Minimal port number for random ports range.

rpc_zmq_serialization = json

string value

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

rpc_zmq_topic_backlog = None

integer value

Maximum number of ingress messages to locally buffer per topic. Default is unlimited.

subscribe_on = []

list value

List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the matchmaker.

use_dynamic_connections = False

boolean value

This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct connections for direct message types (ignored otherwise).

use_pub_sub = False

boolean value

Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.

use_router_proxy = False

boolean value

Use ROUTER remote proxy.

zmq_failover_connections = 2

integer value

How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.

zmq_immediate = True

boolean value

This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it.

zmq_linger = -1

integer value

Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Positive values specify an upper bound for the linger period.

zmq_target_expire = 300

integer value

Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).

zmq_target_update = 180

integer value

Update period in seconds of a name service record about existing target.

zmq_tcp_keepalive = -1

integer value

Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively.

zmq_tcp_keepalive_cnt = -1

integer value

The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_idle = -1

integer value

The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_intvl = -1

integer value

The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

1.1.16. oslo_middleware

The following table outlines the options available under the [oslo_middleware] group in the /etc/barbican/barbican.conf file.

Table 1.16. oslo_middleware

Configuration option = Default valueTypeDescription

enable_proxy_headers_parsing = False

boolean value

Whether the application is behind a proxy or not. This determines if the middleware should parse the headers or not.

1.1.17. oslo_policy

The following table outlines the options available under the [oslo_policy] group in the /etc/barbican/barbican.conf file.

Table 1.17. oslo_policy

Configuration option = Default valueTypeDescription

enforce_scope = False

boolean value

This option controls whether or not to enforce scope when evaluating policies. If True, the scope of the token used in the request is compared to the scope_types of the policy being enforced. If the scopes do not match, an InvalidScope exception will be raised. If False, a message will be logged informing operators that policies are being invoked with mismatching scope.

policy_default_rule = default

string value

Default rule. Enforced when a requested rule is not found.

policy_dirs = [u'policy.d']

multi valued

Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.

policy_file = policy.json

string value

The file that defines policies.

remote_content_type = application/x-www-form-urlencoded

string value

Content Type to send and receive data for REST based policy check

remote_ssl_ca_crt_file = None

string value

Absolute path to ca cert file for REST based policy check

remote_ssl_client_crt_file = None

string value

Absolute path to client cert for REST based policy check

remote_ssl_client_key_file = None

string value

Absolute path client key file REST based policy check

remote_ssl_verify_server_crt = False

boolean value

server identity verification for REST based policy check

1.1.18. p11_crypto_plugin

The following table outlines the options available under the [p11_crypto_plugin] group in the /etc/barbican/barbican.conf file.

Table 1.18. p11_crypto_plugin

Configuration option = Default valueTypeDescription

aes_gcm_generate_iv = True

boolean value

Generate IVs for CKM_AES_GCM mechanism.

always_set_cka_sensitive = True

boolean value

Always set CKA_SENSITIVE=CK_TRUE including CKA_EXTRACTABLE=CK_TRUE keys.

encryption_mechanism = CKM_AES_CBC

string value

Secret encryption mechanism

hmac_key_type = CKK_AES

string value

HMAC Key Type

hmac_keygen_mechanism = CKM_AES_KEY_GEN

string value

HMAC Key Generation Algorithm

hmac_label = None

string value

Master HMAC Key label (as stored in the HSM)

library_path = None

string value

Path to vendor PKCS11 library

login = None

string value

Password to login to PKCS11 session

mkek_label = None

string value

Master KEK label (as stored in the HSM)

mkek_length = None

integer value

Master KEK length in bytes.

pkek_cache_limit = 100

integer value

Project KEK Cache Item Limit

pkek_cache_ttl = 900

integer value

Project KEK Cache Time To Live, in seconds

pkek_length = 32

integer value

Project KEK length in bytes.

plugin_name = PKCS11 HSM

string value

User friendly plugin name

rw_session = True

boolean value

Flag for Read/Write Sessions

`seed_file = `

string value

File to pull entropy for seeding RNG

seed_length = 32

integer value

Amount of data to read from file for seed

slot_id = 1

integer value

HSM Slot ID

1.1.19. queue

The following table outlines the options available under the [queue] group in the /etc/barbican/barbican.conf file.

Table 1.19. queue

Configuration option = Default valueTypeDescription

asynchronous_workers = 1

integer value

Number of asynchronous worker processes

enable = False

boolean value

True enables queuing, False invokes workers synchronously

namespace = barbican

string value

Queue namespace

server_name = barbican.queue

string value

Server name for RPC task processing server

topic = barbican.workers

string value

Queue topic name

version = 1.1

string value

Version of tasks invoked via queue

1.1.20. quotas

The following table outlines the options available under the [quotas] group in the /etc/barbican/barbican.conf file.

Table 1.20. quotas

Configuration option = Default valueTypeDescription

quota_cas = -1

integer value

Number of CAs allowed per project

quota_consumers = -1

integer value

Number of consumers allowed per project

quota_containers = -1

integer value

Number of containers allowed per project

quota_orders = -1

integer value

Number of orders allowed per project

quota_secrets = -1

integer value

Number of secrets allowed per project

1.1.21. retry_scheduler

The following table outlines the options available under the [retry_scheduler] group in the /etc/barbican/barbican.conf file.

Table 1.21. retry_scheduler

Configuration option = Default valueTypeDescription

initial_delay_seconds = 10.0

floating point value

Seconds (float) to wait before starting retry scheduler

periodic_interval_max_seconds = 10.0

floating point value

Seconds (float) to wait between periodic schedule events

1.1.22. secretstore

The following table outlines the options available under the [secretstore] group in the /etc/barbican/barbican.conf file.

Table 1.22. secretstore

Configuration option = Default valueTypeDescription

enable_multiple_secret_stores = False

boolean value

Flag to enable multiple secret store plugin backend support. Default is False

enabled_secretstore_plugins = [u'store_crypto']

multi valued

List of secret store plugins to load.

namespace = barbican.secretstore.plugin

string value

Extension namespace to search for plugins.

stores_lookup_suffix = None

list value

List of suffix to use for looking up plugins which are supported with multiple backend support.

1.1.23. simple_crypto_plugin

The following table outlines the options available under the [simple_crypto_plugin] group in the /etc/barbican/barbican.conf file.

Table 1.23. simple_crypto_plugin

Configuration option = Default valueTypeDescription

kek = dGhpcnR5X3R3b19ieXRlX2tleWJsYWhibGFoYmxhaGg=

string value

Key encryption key to be used by Simple Crypto Plugin

plugin_name = Software Only Crypto

string value

User friendly plugin name

1.1.24. snakeoil_ca_plugin

The following table outlines the options available under the [snakeoil_ca_plugin] group in the /etc/barbican/barbican.conf file.

Table 1.24. snakeoil_ca_plugin

Configuration option = Default valueTypeDescription

ca_cert_chain_path = None

string value

Path to CA certificate chain file

ca_cert_key_path = None

string value

Path to CA certificate key file

ca_cert_path = None

string value

Path to CA certificate file

ca_cert_pkcs7_path = None

string value

Path to CA chain pkcs7 file

subca_cert_key_directory = /etc/barbican/snakeoil-cas

string value

Directory in which to store certs/keys for subcas

1.1.25. ssl

The following table outlines the options available under the [ssl] group in the /etc/barbican/barbican.conf file.

Table 1.25. ssl

Configuration option = Default valueTypeDescription

ca_file = None

string value

CA certificate file to use to verify connecting clients.

cert_file = None

string value

Certificate file to use when starting the server securely.

ciphers = None

string value

Sets the list of available ciphers. value should be a string in the OpenSSL cipher list format.

key_file = None

string value

Private key file to use when starting the server securely.

version = None

string value

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

Chapter 2. ceilometer

The following chapter contains information about the configuration options in the ceilometer service.

2.1. ceilometer.conf

This section contains options for the /etc/ceilometer/ceilometer.conf file.

2.1.1. DEFAULT

The following table outlines the options available under the [DEFAULT] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.1. DEFAULT

Configuration option = Default valueTypeDescription

backdoor_port = None

string value

Enable eventlet backdoor. Acceptable values are 0, <port>, and <start>:<end>, where 0 results in listening on a random tcp port number; <port> results in listening on the specified port number (and not enabling backdoor if that port is in use); and <start>:<end> results in listening on the smallest unused port number within the specified range of port numbers. The chosen port is displayed in the service’s log file.

backdoor_socket = None

string value

Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is mutually exclusive with backdoor_port in that only one should be provided. If both are provided then the existence of this option overrides the usage of that option.

batch_polled_samples = True

boolean value

To reduce polling agent load, samples are sent to the notification agent in a batch. To gain higher throughput at the cost of load set this to False.

conn_pool_min_size = 2

integer value

The pool size limit for connections expiration policy

conn_pool_ttl = 1200

integer value

The time-to-live in sec of idle connections in the pool

control_exchange = openstack

string value

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

debug = False

boolean value

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

default_log_levels = [u'amqp=WARN', u'amqplib=WARN', u'boto=WARN', u'qpid=WARN', u'sqlalchemy=WARN', u'suds=INFO', u'oslo.messaging=INFO', u'oslo_messaging=INFO', u'iso8601=WARN', u'requests.packages.urllib3.connectionpool=WARN', u'urllib3.connectionpool=WARN', u'websocket=WARN', u'requests.packages.urllib3.util.retry=WARN', u'urllib3.util.retry=WARN', u'keystonemiddleware=WARN', u'routes.middleware=WARN', u'stevedore=WARN', u'taskflow=WARN', u'keystoneauth=WARN', u'oslo.cache=INFO', u'dogpile.core.dogpile=INFO']

list value

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

event_pipeline_cfg_file = event_pipeline.yaml

string value

Configuration file for event pipeline definition.

executor_thread_pool_size = 64

integer value

Size of executor thread pool when executor is threading or eventlet.

fatal_deprecations = False

boolean value

Enables or disables fatal status of deprecations.

graceful_shutdown_timeout = 60

integer value

Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait.

host = ccsosp-undercloud.usersys.redhat.com

unknown value

Name of this node, which must be valid in an AMQP key. Can be an opaque identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.

http_timeout = 600

integer value

Timeout seconds for HTTP requests. Set it to None to disable timeout.

hypervisor_inspector = libvirt

string value

Inspector to use for inspecting the hypervisor layer. Known inspectors are libvirt, hyperv, vsphere and xenapi.

`instance_format = [instance: %(uuid)s] `

string value

The format for an instance that is passed with the log message.

`instance_uuid_format = [instance: %(uuid)s] `

string value

The format for an instance UUID that is passed with the log message.

libvirt_type = kvm

string value

Libvirt domain type.

`libvirt_uri = `

string value

Override the default libvirt URI (which is dependent on libvirt_type).

log-config-append = None

string value

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, logging_context_format_string).

log-date-format = %Y-%m-%d %H:%M:%S

string value

Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.

log-dir = None

string value

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

log-file = None

string value

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

log_options = True

boolean value

Enables or disables logging values of all registered options when starting a service (at DEBUG level).

logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

string value

Format string to use for log messages with context.

logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d

string value

Additional data to append to log message when logging level for the message is DEBUG.

logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

string value

Format string to use for log messages when context is undefined.

logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

string value

Prefix each line of exception output with this format.

logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

string value

Defines the format string for %(user_identity)s that is used in logging_context_format_string.

max_parallel_requests = 64

integer value

Maximum number of parallel requests for services to handle at the same time.

pipeline_cfg_file = pipeline.yaml

string value

Configuration file for pipeline definition.

publish_errors = False

boolean value

Enables or disables publication of error events.

rate_limit_burst = 0

integer value

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level = CRITICAL

string value

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

rate_limit_interval = 0

integer value

Interval, number of seconds, of log rate limiting.

reseller_prefix = AUTH_

string value

Swift reseller prefix. Must be on par with reseller_prefix in proxy-server.conf.

reserved_metadata_keys = []

list value

List of metadata keys reserved for metering use. And these keys are additional to the ones included in the namespace.

reserved_metadata_length = 256

integer value

Limit on length of reserved metadata values.

reserved_metadata_namespace = [u'metering.']

list value

List of metadata prefixes reserved for metering use.

rootwrap_config = /etc/ceilometer/rootwrap.conf

string value

Path to the rootwrap configuration file to use for running commands as root

rpc_ack_timeout_base = 15

integer value

Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.

rpc_ack_timeout_multiplier = 2

integer value

Number to multiply base ack timeout by after each retry attempt.

rpc_backend = rabbit

string value

The messaging driver to use, defaults to rabbit. Other drivers include amqp and zmq.

rpc_conn_pool_size = 30

integer value

Size of RPC connection pool.

rpc_message_ttl = 300

integer value

Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server.

rpc_poll_timeout = 1

integer value

The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.

rpc_response_timeout = 60

integer value

Seconds to wait for a response from a call.

rpc_retry_attempts = 3

integer value

Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries, None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled.

rpc_thread_pool_size = 100

integer value

Maximum number of (green) threads to work concurrently.

rpc_use_acks = False

boolean value

Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB.

rpc_zmq_bind_address = *

string value

ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or resolve to this address.

rpc_zmq_bind_port_retries = 100

integer value

Number of retries to find free port number before fail with ZMQBindError.

rpc_zmq_contexts = 1

integer value

Number of ZeroMQ contexts, defaults to 1.

rpc_zmq_host = ccsosp-undercloud.usersys.redhat.com

string value

Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova.

rpc_zmq_ipc_dir = /var/run/openstack

string value

Directory for holding IPC sockets.

rpc_zmq_matchmaker = redis

string value

MatchMaker driver.

rpc_zmq_max_port = 65536

integer value

Maximal port number for random ports range.

rpc_zmq_min_port = 49153

port value

Minimal port number for random ports range.

rpc_zmq_serialization = json

string value

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

rpc_zmq_topic_backlog = None

integer value

Maximum number of ingress messages to locally buffer per topic. Default is unlimited.

sample_source = openstack

string value

Source for samples emitted on this instance.

subscribe_on = []

list value

List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the matchmaker.

syslog-log-facility = LOG_USER

string value

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

transport_url = None

string value

The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:

driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query

Example: rabbit://rabbitmq:password@127.0.0.1:5672//

For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html

use-journal = False

boolean value

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

use-json = False

boolean value

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use-syslog = False

boolean value

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_dynamic_connections = False

boolean value

This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct connections for direct message types (ignored otherwise).

use_pub_sub = False

boolean value

Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.

use_router_proxy = False

boolean value

Use ROUTER remote proxy.

use_stderr = False

boolean value

Log output to standard error. This option is ignored if log_config_append is set.

watch-log-file = False

boolean value

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

zmq_failover_connections = 2

integer value

How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.

zmq_immediate = True

boolean value

This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it.

zmq_linger = -1

integer value

Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Positive values specify an upper bound for the linger period.

zmq_target_expire = 300

integer value

Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).

zmq_target_update = 180

integer value

Update period in seconds of a name service record about existing target.

zmq_tcp_keepalive = -1

integer value

Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively.

zmq_tcp_keepalive_cnt = -1

integer value

The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_idle = -1

integer value

The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_intvl = -1

integer value

The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

2.1.2. compute

The following table outlines the options available under the [compute] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.2. compute

Configuration option = Default valueTypeDescription

instance_discovery_method = libvirt_metadata

string value

Ceilometer offers many methods to discover the instance running on a compute node: * naive: poll nova to get all instances * workload_partitioning: poll nova to get instances of the compute * libvirt_metadata: get instances from libvirt metadata but without instance metadata (recommended for Gnocchi backend

resource_cache_expiry = 3600

integer value

The expiry to totally refresh the instances resource cache, since the instance may be migrated to another host, we need to clean the legacy instances info in local cache by totally refreshing the local cache. The minimum should be the value of the config option of resource_update_interval. This option is only used for agent polling to Nova API, so it will work only when instance_discovery_method is set to naive.

resource_update_interval = 0

integer value

New instances will be discovered periodically based on this option (in seconds). By default, the agent discovers instances according to pipeline polling interval. If option is greater than 0, the instance list to poll will be updated based on this option’s interval. Measurements relating to the instances will match intervals defined in pipeline. This option is only used for agent polling to Nova API, so it will work only when instance_discovery_method is set to naive.

2.1.3. coordination

The following table outlines the options available under the [coordination] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.3. coordination

Configuration option = Default valueTypeDescription

backend_url = None

string value

The backend URL to use for distributed coordination. If left empty, per-deployment central agent and per-host compute agent won’t do workload partitioning and will only function correctly if a single instance of that service is running.

check_watchers = 10.0

floating point value

Number of seconds between checks to see if group membership has changed

2.1.4. dispatcher_gnocchi

The following table outlines the options available under the [dispatcher_gnocchi] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.4. dispatcher_gnocchi

Configuration option = Default valueTypeDescription

archive_policy = None

string value

The archive policy to use when the dispatcher create a new metric.

filter_project = gnocchi

string value

Gnocchi project used to filter out samples generated by Gnocchi service activity

request_timeout = 6.05

floating point value

Number of seconds before request to gnocchi times out

resources_definition_file = gnocchi_resources.yaml

string value

The Yaml file that defines mapping between samples and gnocchi resources/metrics

2.1.5. event

The following table outlines the options available under the [event] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.5. event

Configuration option = Default valueTypeDescription

definitions_cfg_file = event_definitions.yaml

string value

Configuration file for event definitions.

drop_unmatched_notifications = False

boolean value

Drop notifications if no event definition matches. (Otherwise, we convert them with just the default traits)

store_raw = []

multi valued

Store the raw notification for select priority levels (info and/or error). By default, raw details are not captured.

2.1.6. hardware

The following table outlines the options available under the [hardware] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.6. hardware

Configuration option = Default valueTypeDescription

meter_definitions_file = snmp.yaml

string value

Configuration file for defining hardware snmp meters.

readonly_user_auth_proto = None

string value

SNMPd v3 authentication algorithm of all the nodes running in the cloud

readonly_user_name = ro_snmp_user

string value

SNMPd user name of all nodes running in the cloud.

readonly_user_password = password

string value

SNMPd v3 authentication password of all the nodes running in the cloud.

readonly_user_priv_password = None

string value

SNMPd v3 encryption password of all the nodes running in the cloud.

readonly_user_priv_proto = None

string value

SNMPd v3 encryption algorithm of all the nodes running in the cloud

tripleo_network_name = ctlplane

string value

Name of the control plane Tripleo network

url_scheme = snmp://

string value

URL scheme to use for hardware nodes.

2.1.7. ipmi

The following table outlines the options available under the [ipmi] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.7. ipmi

Configuration option = Default valueTypeDescription

node_manager_init_retry = 3

integer value

Number of retries upon Intel Node Manager initialization failure

polling_retry = 3

integer value

Tolerance of IPMI/NM polling failures before disable this pollster. Negative indicates retrying forever.

2.1.8. matchmaker_redis

The following table outlines the options available under the [matchmaker_redis] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.8. matchmaker_redis

Configuration option = Default valueTypeDescription

check_timeout = 20000

integer value

Time in ms to wait before the transaction is killed.

host = 127.0.0.1

string value

Host to locate redis.

`password = `

string value

Password for Redis server (optional).

port = 6379

port value

Use this port to connect to redis host.

sentinel_group_name = oslo-messaging-zeromq

string value

Redis replica set name.

sentinel_hosts = []

list value

List of Redis Sentinel hosts (fault tolerance mode), e.g., [host:port, host1:port …​ ]

socket_timeout = 10000

integer value

Timeout in ms on blocking socket operations.

wait_timeout = 2000

integer value

Time in ms to wait between connection attempts.

2.1.9. meter

The following table outlines the options available under the [meter] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.9. meter

Configuration option = Default valueTypeDescription

meter_definitions_cfg_file = None

string value

Configuration file for defining meter notifications. This option is deprecated and use meter_definitions_dirs to configure meter notification file. Meter definitions configuration file will be sought according to the parameter.

meter_definitions_dirs = [u'/etc/ceilometer/meters.d', u'/usr/lib/python2.7/site-packages/ceilometer/data/meters.d']

multi valued

List directory to find files of defining meter notifications.

2.1.10. notification

The following table outlines the options available under the [notification] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.10. notification

Configuration option = Default valueTypeDescription

ack_on_event_error = True

boolean value

Acknowledge message when event persistence fails.

batch_size = 100

integer value

Number of notification messages to wait before publishing them. Batching is advised when transformations are applied in pipeline.

batch_timeout = 5

integer value

Number of seconds to wait before publishing samples when batch_size is not reached (None means indefinitely)

messaging_urls = []

multi valued

Messaging URLs to listen for notifications. Example: rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host (DEFAULT/transport_url is used if empty). This is useful when you have dedicate messaging nodes for each service, for example, all nova notifications go to rabbit-nova:5672, while all cinder notifications go to rabbit-cinder:5672.

notification_control_exchanges = [u'nova', u'glance', u'neutron', u'cinder', u'heat', u'keystone', u'sahara', u'trove', u'zaqar', u'swift', u'ceilometer', u'magnum', u'dns', u'ironic', u'aodh']

multi valued

Exchanges name to listen for notifications.

pipeline_processing_queues = 10

integer value

Number of queues to parallelize workload across. This value should be larger than the number of active notification agents for optimal results. WARNING: Once set, lowering this value may result in lost data.

pipelines = [u'meter', u'event']

multi valued

Select which pipeline managers to enable to generate data

workers = 1

integer value

Number of workers for notification service, default value is 1.

workload_partitioning = False

boolean value

Enable workload partitioning, allowing multiple notification agents to be run simultaneously.

2.1.11. oslo_concurrency

The following table outlines the options available under the [oslo_concurrency] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.11. oslo_concurrency

Configuration option = Default valueTypeDescription

disable_process_locking = False

boolean value

Enables or disables inter-process locks.

lock_path = None

string value

Directory to use for lock files. For security, the specified directory should only be writable by the user running the processes that need locking. Defaults to environment variable OSLO_LOCK_PATH. If external locks are used, a lock path must be set.

2.1.12. oslo_messaging_amqp

The following table outlines the options available under the [oslo_messaging_amqp] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.12. oslo_messaging_amqp

Configuration option = Default valueTypeDescription

addressing_mode = dynamic

string value

Indicates the addressing mode used by the driver. Permitted values: legacy - use legacy non-routable addressing routable - use routable addresses dynamic - use legacy addresses if the message bus does not support routing otherwise use routable addressing

allow_insecure_clients = False

boolean value

Accept clients using either SSL or plain TCP

anycast_address = anycast

string value

Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.

broadcast_prefix = broadcast

string value

address prefix used when broadcasting to all servers

connection_retry_backoff = 2

integer value

Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.

connection_retry_interval = 1

integer value

Seconds to pause before attempting to re-connect.

connection_retry_interval_max = 30

integer value

Maximum limit for connection_retry_interval + connection_retry_backoff

container_name = None

string value

Name for the AMQP container. must be globally unique. Defaults to a generated UUID

default_notification_exchange = None

string value

Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else notify

default_notify_timeout = 30

integer value

The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.

default_reply_retry = 0

integer value

The maximum number of attempts to re-send a reply message which failed due to a recoverable error.

default_reply_timeout = 30

integer value

The deadline for an rpc reply message delivery.

default_rpc_exchange = None

string value

Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else rpc

default_send_timeout = 30

integer value

The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.

default_sender_link_timeout = 600

integer value

The duration to schedule a purge of idle sender links. Detach link after expiry.

group_request_prefix = unicast

string value

address prefix when sending to any server in group

idle_timeout = 0

integer value

Timeout for inactive connections (in seconds)

link_retry_delay = 10

integer value

Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.

multicast_address = multicast

string value

Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.

notify_address_prefix = openstack.org/om/notify

string value

Address prefix for all generated Notification addresses

notify_server_credit = 100

integer value

Window size for incoming Notification messages

`password = `

string value

Password for message broker authentication

pre_settled = [u'rpc-cast', u'rpc-reply']

multi valued

Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: rpc-call - send RPC Calls pre-settled rpc-reply- send RPC Replies pre-settled rpc-cast - Send RPC Casts pre-settled notify - Send Notifications pre-settled

pseudo_vhost = True

boolean value

Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private subnet per virtual host. Set to False if the message bus supports virtual hosting using the hostname field in the AMQP 1.0 Open performative as the name of the virtual host.

reply_link_credit = 200

integer value

Window size for incoming RPC Reply messages.

rpc_address_prefix = openstack.org/om/rpc

string value

Address prefix for all generated RPC addresses

rpc_server_credit = 100

integer value

Window size for incoming RPC Request messages

`sasl_config_dir = `

string value

Path to directory that contains the SASL configuration

`sasl_config_name = `

string value

Name of configuration file (without .conf suffix)

`sasl_default_realm = `

string value

SASL realm to use if no realm present in username

`sasl_mechanisms = `

string value

Space separated list of acceptable SASL mechanisms

server_request_prefix = exclusive

string value

address prefix used when sending to a specific server

ssl = False

boolean value

Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.

`ssl_ca_file = `

string value

CA certificate PEM file used to verify the server’s certificate

`ssl_cert_file = `

string value

Self-identifying certificate PEM file for client authentication

`ssl_key_file = `

string value

Private key PEM file used to sign ssl_cert_file certificate (optional)

ssl_key_password = None

string value

Password for decrypting ssl_key_file (if encrypted)

ssl_verify_vhost = False

boolean value

By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.

trace = False

boolean value

Debug: dump AMQP frames to stdout

unicast_address = unicast

string value

Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.

`username = `

string value

User name for message broker authentication

2.1.13. oslo_messaging_kafka

The following table outlines the options available under the [oslo_messaging_kafka] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.13. oslo_messaging_kafka

Configuration option = Default valueTypeDescription

conn_pool_min_size = 2

integer value

The pool size limit for connections expiration policy

conn_pool_ttl = 1200

integer value

The time-to-live in sec of idle connections in the pool

consumer_group = oslo_messaging_consumer

string value

Group id for Kafka consumer. Consumers in one group will coordinate message consumption

kafka_consumer_timeout = 1.0

floating point value

Default timeout(s) for Kafka consumers

kafka_default_host = localhost

string value

Default Kafka broker Host

kafka_default_port = 9092

port value

Default Kafka broker Port

kafka_max_fetch_bytes = 1048576

integer value

Max fetch bytes of Kafka consumer

pool_size = 10

integer value

Pool Size for Kafka Consumers

producer_batch_size = 16384

integer value

Size of batch for the producer async send

producer_batch_timeout = 0.0

floating point value

Upper bound on the delay for KafkaProducer batching in seconds

2.1.14. oslo_messaging_notifications

The following table outlines the options available under the [oslo_messaging_notifications] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.14. oslo_messaging_notifications

Configuration option = Default valueTypeDescription

driver = []

multi valued

The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop

retry = -1

integer value

The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite

topics = [u'notifications']

list value

AMQP topic used for OpenStack notifications.

transport_url = None

string value

A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.

2.1.15. oslo_messaging_rabbit

The following table outlines the options available under the [oslo_messaging_rabbit] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.15. oslo_messaging_rabbit

Configuration option = Default valueTypeDescription

amqp_auto_delete = False

boolean value

Auto-delete queues in AMQP.

amqp_durable_queues = False

boolean value

Use durable queues in AMQP.

channel_max = None

integer value

Maximum number of channels to allow

connection_factory = single

string value

Connection factory implementation

default_notification_exchange = ${control_exchange}_notification

string value

Exchange name for sending notifications

default_notification_retry_attempts = -1

integer value

Reconnecting retry count in case of connectivity problem during sending notification, -1 means infinite retry.

default_rpc_exchange = ${control_exchange}_rpc

string value

Exchange name for sending RPC messages

default_rpc_retry_attempts = -1

integer value

Reconnecting retry count in case of connectivity problem during sending RPC message, -1 means infinite retry. If actual retry attempts in not 0 the rpc request could be processed more than one time

default_serializer_type = json

string value

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

fake_rabbit = False

boolean value

Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake

frame_max = None

integer value

The maximum byte size for an AMQP frame

heartbeat_interval = 3

integer value

How often to send heartbeats for consumer’s connections

heartbeat_rate = 2

integer value

How often times during the heartbeat_timeout_threshold we check the heartbeat.

heartbeat_timeout_threshold = 60

integer value

Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disable the heartbeat). EXPERIMENTAL

host_connection_reconnect_delay = 0.25

floating point value

Set delay for reconnection to some host which has connection error

kombu_compression = None

string value

EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.

kombu_failover_strategy = round-robin

string value

Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.

kombu_missing_consumer_retry_timeout = 60

integer value

How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.

kombu_reconnect_delay = 1.0

floating point value

How long to wait before reconnecting in response to an AMQP consumer cancel notification.

notification_listener_prefetch_count = 100

integer value

Max number of not acknowledged message which RabbitMQ can send to notification listener.

notification_persistence = False

boolean value

Persist notification messages.

notification_retry_delay = 0.25

floating point value

Reconnecting retry delay in case of connectivity problem during sending notification message

pool_max_overflow = 0

integer value

Maximum number of connections to create above pool_max_size.

pool_max_size = 30

integer value

Maximum number of connections to keep queued.

pool_recycle = 600

integer value

Lifetime of a connection (since creation) in seconds or None for no recycling. Expired connections are closed on acquire.

pool_stale = 60

integer value

Threshold at which inactive (since release) connections are considered stale in seconds or None for no staleness. Stale connections are closed on acquire.

pool_timeout = 30

integer value

Default number of seconds to wait for a connections to available

rabbit_ha_queues = False

boolean value

Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA ^(?!amq\.).* {"ha-mode": "all"} "

rabbit_host = localhost

string value

The RabbitMQ broker address where a single node is used.

rabbit_hosts = [u'$rabbit_host:$rabbit_port']

list value

RabbitMQ HA cluster host:port pairs.

rabbit_interval_max = 30

integer value

Maximum interval of RabbitMQ connection retries. Default is 30 seconds.

rabbit_login_method = AMQPLAIN

string value

The RabbitMQ login method.

rabbit_max_retries = 0

integer value

Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry count).

rabbit_password = guest

string value

The RabbitMQ password.

rabbit_port = 5672

port value

The RabbitMQ broker port where a single node is used.

rabbit_qos_prefetch_count = 0

integer value

Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.

rabbit_retry_backoff = 2

integer value

How long to backoff for between retries when connecting to RabbitMQ.

rabbit_retry_interval = 1

integer value

How frequently to retry connecting with RabbitMQ.

rabbit_transient_queues_ttl = 1800

integer value

Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.

rabbit_userid = guest

string value

The RabbitMQ userid.

rabbit_virtual_host = /

string value

The RabbitMQ virtual host.

rpc_listener_prefetch_count = 100

integer value

Max number of not acknowledged message which RabbitMQ can send to rpc listener.

rpc_queue_expiration = 60

integer value

Time to live for rpc queues without consumers in seconds.

rpc_reply_exchange = ${control_exchange}_rpc_reply

string value

Exchange name for receiving RPC replies

rpc_reply_listener_prefetch_count = 100

integer value

Max number of not acknowledged message which RabbitMQ can send to rpc reply listener.

rpc_reply_retry_attempts = -1

integer value

Reconnecting retry count in case of connectivity problem during sending reply. -1 means infinite retry during rpc_timeout

rpc_reply_retry_delay = 0.25

floating point value

Reconnecting retry delay in case of connectivity problem during sending reply.

rpc_retry_delay = 0.25

floating point value

Reconnecting retry delay in case of connectivity problem during sending RPC message

socket_timeout = 0.25

floating point value

Set socket timeout in seconds for connection’s socket

ssl = None

boolean value

Enable SSL

`ssl_ca_file = `

string value

SSL certification authority file (valid only if SSL enabled).

`ssl_cert_file = `

string value

SSL cert file (valid only if SSL enabled).

`ssl_key_file = `

string value

SSL key file (valid only if SSL enabled).

ssl_options = None

dict value

Arguments passed to ssl.wrap_socket

`ssl_version = `

string value

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

tcp_user_timeout = 0.25

floating point value

Set TCP_USER_TIMEOUT in seconds for connection’s socket

2.1.16. oslo_messaging_zmq

The following table outlines the options available under the [oslo_messaging_zmq] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.16. oslo_messaging_zmq

Configuration option = Default valueTypeDescription

rpc_ack_timeout_base = 15

integer value

Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.

rpc_ack_timeout_multiplier = 2

integer value

Number to multiply base ack timeout by after each retry attempt.

rpc_message_ttl = 300

integer value

Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server.

rpc_poll_timeout = 1

integer value

The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.

rpc_retry_attempts = 3

integer value

Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries, None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled.

rpc_thread_pool_size = 100

integer value

Maximum number of (green) threads to work concurrently.

rpc_use_acks = False

boolean value

Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB.

rpc_zmq_bind_address = *

string value

ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or resolve to this address.

rpc_zmq_bind_port_retries = 100

integer value

Number of retries to find free port number before fail with ZMQBindError.

rpc_zmq_contexts = 1

integer value

Number of ZeroMQ contexts, defaults to 1.

rpc_zmq_host = ccsosp-undercloud.usersys.redhat.com

string value

Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova.

rpc_zmq_ipc_dir = /var/run/openstack

string value

Directory for holding IPC sockets.

rpc_zmq_matchmaker = redis

string value

MatchMaker driver.

rpc_zmq_max_port = 65536

integer value

Maximal port number for random ports range.

rpc_zmq_min_port = 49153

port value

Minimal port number for random ports range.

rpc_zmq_serialization = json

string value

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

rpc_zmq_topic_backlog = None

integer value

Maximum number of ingress messages to locally buffer per topic. Default is unlimited.

subscribe_on = []

list value

List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the matchmaker.

use_dynamic_connections = False

boolean value

This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct connections for direct message types (ignored otherwise).

use_pub_sub = False

boolean value

Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.

use_router_proxy = False

boolean value

Use ROUTER remote proxy.

zmq_failover_connections = 2

integer value

How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.

zmq_immediate = True

boolean value

This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it.

zmq_linger = -1

integer value

Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Positive values specify an upper bound for the linger period.

zmq_target_expire = 300

integer value

Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).

zmq_target_update = 180

integer value

Update period in seconds of a name service record about existing target.

zmq_tcp_keepalive = -1

integer value

Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively.

zmq_tcp_keepalive_cnt = -1

integer value

The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_idle = -1

integer value

The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_intvl = -1

integer value

The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

2.1.17. polling

The following table outlines the options available under the [polling] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.17. polling

Configuration option = Default valueTypeDescription

cfg_file = polling.yaml

string value

Configuration file for polling definition.

partitioning_group_prefix = None

string value

Work-load partitioning group prefix. Use only if you want to run multiple polling agents with different config files. For each sub-group of the agent pool with the same partitioning_group_prefix a disjoint subset of pollsters should be loaded.

2.1.18. publisher

The following table outlines the options available under the [publisher] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.18. publisher

Configuration option = Default valueTypeDescription

telemetry_secret = change this for valid signing

string value

Secret value for signing messages. Set value empty if signing is not required to avoid computational overhead.

2.1.19. publisher_notifier

The following table outlines the options available under the [publisher_notifier] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.19. publisher_notifier

Configuration option = Default valueTypeDescription

event_topic = event

string value

The topic that ceilometer uses for event notifications.

metering_topic = metering

string value

The topic that ceilometer uses for metering notifications.

telemetry_driver = messagingv2

string value

The driver that ceilometer uses for metering notifications.

2.1.20. rgw_admin_credentials

The following table outlines the options available under the [rgw_admin_credentials] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.20. rgw_admin_credentials

Configuration option = Default valueTypeDescription

access_key = None

string value

Access key for Radosgw Admin.

secret_key = None

string value

Secret key for Radosgw Admin.

2.1.21. service_credentials

The following table outlines the options available under the [service_credentials] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.21. service_credentials

Configuration option = Default valueTypeDescription

auth-url = None

string value

Authentication URL

auth_section = None

string value

Config Section from which to load plugin specific options

auth_type = None

string value

Authentication type to load

default-domain-id = None

string value

Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

default-domain-name = None

string value

Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

domain-id = None

string value

Domain ID to scope to

domain-name = None

string value

Domain name to scope to

interface = public

string value

Type of endpoint in Identity service catalog to use for communication with OpenStack services.

password = None

string value

User’s password

project-domain-id = None

string value

Domain ID containing project

project-domain-name = None

string value

Domain name containing project

project-id = None

string value

Project ID to scope to

project-name = None

string value

Project name to scope to

region-name = None

string value

Region name to use for OpenStack service endpoints.

system-scope = None

string value

Scope for system operations

trust-id = None

string value

Trust ID

user-domain-id = None

string value

User’s domain id

user-domain-name = None

string value

User’s domain name

user-id = None

string value

User id

username = None

string value

Username

2.1.22. service_types

The following table outlines the options available under the [service_types] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.22. service_types

Configuration option = Default valueTypeDescription

cinder = volumev3

string value

Cinder service type.

glance = image

string value

Glance service type.

neutron = network

string value

Neutron service type.

neutron_lbaas_version = v2

string value

Neutron load balancer version.

nova = compute

string value

Nova service type.

radosgw = None

string value

Radosgw service type.

swift = object-store

string value

Swift service type.

2.1.23. vmware

The following table outlines the options available under the [vmware] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.23. vmware

Configuration option = Default valueTypeDescription

api_retry_count = 10

integer value

Number of times a VMware vSphere API may be retried.

ca_file = None

string value

CA bundle file to use in verifying the vCenter server certificate.

host_ip = 127.0.0.1

unknown value

IP address of the VMware vSphere host.

`host_password = `

string value

Password of VMware vSphere.

host_port = 443

port value

Port of the VMware vSphere host.

`host_username = `

string value

Username of VMware vSphere.

insecure = False

boolean value

If true, the vCenter server certificate is not verified. If false, then the default CA truststore is used for verification. This option is ignored if "ca_file" is set.

task_poll_interval = 0.5

floating point value

Sleep time in seconds for polling an ongoing async task.

wsdl_location = None

string value

Optional vim service WSDL location e.g http://<server>/vimService.wsdl. Optional over-ride to default location for bug work-arounds.

2.1.24. xenapi

The following table outlines the options available under the [xenapi] group in the /etc/ceilometer/ceilometer.conf file.

Table 2.24. xenapi

Configuration option = Default valueTypeDescription

connection_password = None

string value

Password for connection to XenServer/Xen Cloud Platform.

connection_url = None

string value

URL for connection to XenServer/Xen Cloud Platform.

connection_username = root

string value

Username for connection to XenServer/Xen Cloud Platform.

Chapter 3. cinder

The following chapter contains information about the configuration options in the cinder service.

3.1. cinder.conf

This section contains options for the /etc/cinder/cinder.conf file.

3.1.1. DEFAULT

The following table outlines the options available under the [DEFAULT] group in the /etc/cinder/cinder.conf file.

Table 3.1. DEFAULT

Configuration option = Default valueTypeDescription

allocated_capacity_weight_multiplier = -1.0

floating point value

Multiplier used for weighing allocated capacity. Positive numbers mean to stack vs spread.

allow_availability_zone_fallback = False

boolean value

If the requested Cinder availability zone is unavailable, fall back to the value of default_availability_zone, then storage_availability_zone, instead of failing.

allow_inuse_volume_type_modification = False

boolean value

DEPRECATED: Allow the ability to modify the extra-spec settings of an in-use volume-type.

allowed_direct_url_schemes = []

list value

A list of url schemes that can be downloaded directly via the direct_url. Currently supported schemes: [file, cinder].

api_paste_config = api-paste.ini

string value

File name for the paste.deploy config for api service

api_rate_limit = True

boolean value

Enables or disables rate limit of the API.

auth_strategy = keystone

string value

The strategy to use for auth. Supports noauth or keystone.

az_cache_duration = 3600

integer value

Cache volume availability zones in memory for the provided duration in seconds

backdoor_port = None

string value

Enable eventlet backdoor. Acceptable values are 0, <port>, and <start>:<end>, where 0 results in listening on a random tcp port number; <port> results in listening on the specified port number (and not enabling backdoor if that port is in use); and <start>:<end> results in listening on the smallest unused port number within the specified range of port numbers. The chosen port is displayed in the service’s log file.

backdoor_socket = None

string value

Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is mutually exclusive with backdoor_port in that only one should be provided. If both are provided then the existence of this option overrides the usage of that option.

backend_availability_zone = None

string value

Availability zone for this volume backend. If not set, the storage_availability_zone option value is used as the default for all backends.

backup_api_class = cinder.backup.api.API

string value

The full class name of the volume backup API class

backup_ceph_chunk_size = 134217728

integer value

The chunk size, in bytes, that a backup is broken into before transfer to the Ceph object store.

backup_ceph_conf = /etc/ceph/ceph.conf

string value

Ceph configuration file to use.

backup_ceph_image_journals = False

boolean value

If True, apply JOURNALING and EXCLUSIVE_LOCK feature bits to the backup RBD objects to allow mirroring

backup_ceph_pool = backups

string value

The Ceph pool where volume backups are stored.

backup_ceph_stripe_count = 0

integer value

RBD stripe count to use when creating a backup image.

backup_ceph_stripe_unit = 0

integer value

RBD stripe unit to use when creating a backup image.

backup_ceph_user = cinder

string value

The Ceph user to connect with. Default here is to use the same user as for Cinder volumes. If not using cephx this should be set to None.

backup_compression_algorithm = zlib

string value

Compression algorithm (None to disable)

backup_container = None

string value

Custom directory to use for backups.

backup_driver = cinder.backup.drivers.swift.SwiftBackupDriver

string value

Driver to use for backups.

backup_enable_progress_timer = True

boolean value

Enable or Disable the timer to send the periodic progress notifications to Ceilometer when backing up the volume to the backend storage. The default value is True to enable the timer.

backup_file_size = 1999994880

integer value

The maximum size in bytes of the files used to hold backups. If the volume being backed up exceeds this size, then it will be backed up into multiple files.backup_file_size must be a multiple of backup_sha_block_size_bytes.

backup_gcs_block_size = 32768

integer value

The size in bytes that changes are tracked for incremental backups. backup_gcs_object_size has to be multiple of backup_gcs_block_size.

backup_gcs_bucket = None

string value

The GCS bucket to use.

backup_gcs_bucket_location = US

string value

Location of GCS bucket.

backup_gcs_credential_file = None

string value

Absolute path of GCS service account credential file.

backup_gcs_enable_progress_timer = True

boolean value

Enable or Disable the timer to send the periodic progress notifications to Ceilometer when backing up the volume to the GCS backend storage. The default value is True to enable the timer.

backup_gcs_num_retries = 3

integer value

Number of times to retry.

backup_gcs_object_size = 52428800

integer value

The size in bytes of GCS backup objects.

backup_gcs_project_id = None

string value

Owner project id for GCS bucket.

backup_gcs_proxy_url = None

uri value

URL for http proxy access.

backup_gcs_reader_chunk_size = 2097152

integer value

GCS object will be downloaded in chunks of bytes.

backup_gcs_retry_error_codes = [u'429']

list value

List of GCS error codes.

backup_gcs_storage_class = NEARLINE

string value

Storage class of GCS bucket.

backup_gcs_user_agent = gcscinder

string value

Http user-agent string for gcs api.

backup_gcs_writer_chunk_size = 2097152

integer value

GCS object will be uploaded in chunks of bytes. Pass in a value of -1 if the file is to be uploaded as a single chunk.

backup_manager = cinder.backup.manager.BackupManager

string value

Full class name for the Manager for volume backup

backup_metadata_version = 2

integer value

Backup metadata version to be used when backing up volume metadata. If this number is bumped, make sure the service doing the restore supports the new version.

backup_mount_options = None

string value

Mount options passed to the NFS client. See NFS man page for details.

backup_mount_point_base = $state_path/backup_mount

string value

Base dir containing mount point for NFS share.

backup_name_template = backup-%s

string value

Template string to be used to generate backup names

backup_native_threads_pool_size = 60

integer value

Size of the native threads pool for the backups. Most backup drivers rely heavily on this, it can be decreased for specific drivers that don’t.

backup_object_number_per_notification = 10

integer value

The number of chunks or objects, for which one Ceilometer notification will be sent

backup_posix_path = $state_path/backup

string value

Path specifying where to store backups.

backup_service_inithost_offload = True

boolean value

Offload pending backup delete during backup service startup. If false, the backup service will remain down until all pending backups are deleted.

backup_sha_block_size_bytes = 32768

integer value

The size in bytes that changes are tracked for incremental backups. backup_file_size has to be multiple of backup_sha_block_size_bytes.

backup_share = None

string value

NFS share in hostname:path, ipv4addr:path, or "[ipv6addr]:path" format.

backup_swift_auth = per_user

string value

Swift authentication mechanism (per_user or single_user).

backup_swift_auth_insecure = False

boolean value

Bypass verification of server certificate when making SSL connection to Swift.

backup_swift_auth_url = None

uri value

The URL of the Keystone endpoint

backup_swift_auth_version = 1

string value

Swift authentication version. Specify "1" for auth 1.0, or "2" for auth 2.0 or "3" for auth 3.0

backup_swift_block_size = 32768

integer value

The size in bytes that changes are tracked for incremental backups. backup_swift_object_size has to be multiple of backup_swift_block_size.

backup_swift_ca_cert_file = None

string value

Location of the CA certificate file to use for swift client requests.

backup_swift_container = volumebackups

string value

The default Swift container to use

backup_swift_enable_progress_timer = True

boolean value

Enable or Disable the timer to send the periodic progress notifications to Ceilometer when backing up the volume to the Swift backend storage. The default value is True to enable the timer.

backup_swift_key = None

string value

Swift key for authentication

backup_swift_object_size = 52428800

integer value

The size in bytes of Swift backup objects

backup_swift_project = None

string value

Swift project/account name. Required when connecting to an auth 3.0 system

backup_swift_project_domain = None

string value

Swift project domain name. Required when connecting to an auth 3.0 system

backup_swift_retry_attempts = 3

integer value

The number of retries to make for Swift operations

backup_swift_retry_backoff = 2

integer value

The backoff time in seconds between Swift retries

backup_swift_tenant = None

string value

Swift tenant/account name. Required when connecting to an auth 2.0 system

backup_swift_url = None

uri value

The URL of the Swift endpoint

backup_swift_user = None

string value

Swift user name

backup_swift_user_domain = None

string value

Swift user domain name. Required when connecting to an auth 3.0 system

backup_timer_interval = 120

integer value

Interval, in seconds, between two progress notifications reporting the backup status

backup_tsm_compression = True

boolean value

Enable or Disable compression for backups

backup_tsm_password = password

string value

TSM password for the running username

backup_tsm_volume_prefix = backup

string value

Volume prefix for the backup id when backing up to TSM

backup_use_same_host = False

boolean value

Backup services use same backend.

backup_use_temp_snapshot = False

boolean value

If this is set to True, a temporary snapshot will be created for performing non-disruptive backups. Otherwise a temporary volume will be cloned in order to perform a backup.

capacity_weight_multiplier = 1.0

floating point value

Multiplier used for weighing free capacity. Negative numbers mean to stack vs spread.

`chap_password = `

string value

Password for specified CHAP account name.

`chap_username = `

string value

CHAP user name.

chiscsi_conf = /etc/chelsio-iscsi/chiscsi.conf

string value

Chiscsi (CXT) global defaults configuration file

cinder_internal_tenant_project_id = None

string value

ID of the project which will be used as the Cinder internal tenant.

cinder_internal_tenant_user_id = None

string value

ID of the user to be used in volume operations as the Cinder internal tenant.

client_socket_timeout = 900

integer value

Timeout for client connections' socket operations. If an incoming connection is idle for this number of seconds it will be closed. A value of 0 means wait forever.

cloned_volume_same_az = True

boolean value

Ensure that the new volumes are the same AZ as snapshot or source volume

cluster = None

string value

Name of this cluster. Used to group volume hosts that share the same backend configurations to work in HA Active-Active mode. Active-Active is not yet supported.

compute_api_class = cinder.compute.nova.API

string value

The full class name of the compute API class to use

config-dir = [u'~/.project/project.conf.d/', u'~/project.conf.d/', u'/etc/project/project.conf.d/', u'/etc/project.conf.d/']

list value

Path to a config directory to pull *.conf files from. This file set is sorted, so as to provide a predictable parse order if individual options are over-ridden. The set is parsed after the file(s) specified via previous --config-file, arguments hence over-ridden options in the directory take precedence.

config-file = [u'~/.project/project.conf', u'~/project.conf', u'/etc/project/project.conf', u'/etc/project.conf']

unknown value

Path to a config file to use. Multiple config files can be specified, with values in later files taking precedence. Defaults to %(default)s.

conn_pool_min_size = 2

integer value

The pool size limit for connections expiration policy

conn_pool_ttl = 1200

integer value

The time-to-live in sec of idle connections in the pool

consistencygroup_api_class = cinder.consistencygroup.api.API

string value

The full class name of the consistencygroup API class

control_exchange = openstack

string value

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

datacore_api_timeout = 300

integer value

Seconds to wait for a response from a DataCore API call.

datacore_disk_failed_delay = 15

integer value

Seconds to wait for DataCore virtual disk to come out of the "Failed" state.

datacore_disk_pools = []

list value

List of DataCore disk pools that can be used by volume driver.

datacore_disk_type = single

string value

DataCore virtual disk type (single/mirrored). Mirrored virtual disks require two storage servers in the server group.

datacore_iscsi_chap_enabled = False

boolean value

Configure CHAP authentication for iSCSI connections.

datacore_iscsi_chap_storage = None

string value

iSCSI CHAP authentication password storage file.

datacore_iscsi_unallowed_targets = []

list value

List of iSCSI targets that cannot be used to attach volume. To prevent the DataCore iSCSI volume driver from using some front-end targets in volume attachment, specify this option and list the iqn and target machine for each target as the value, such as <iqn:target name>, <iqn:target name>, <iqn:target name>.

datacore_storage_profile = None

string value

DataCore virtual disk storage profile.

db_driver = cinder.db

string value

Driver to use for database access

debug = False

boolean value

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

default_availability_zone = None

string value

Default availability zone for new volumes. If not set, the storage_availability_zone option value is used as the default for new volumes.

default_group_type = None

string value

Default group type to use

default_log_levels = [u'amqp=WARN', u'amqplib=WARN', u'boto=WARN', u'qpid=WARN', u'sqlalchemy=WARN', u'suds=INFO', u'oslo.messaging=INFO', u'oslo_messaging=INFO', u'iso8601=WARN', u'requests.packages.urllib3.connectionpool=WARN', u'urllib3.connectionpool=WARN', u'websocket=WARN', u'requests.packages.urllib3.util.retry=WARN', u'urllib3.util.retry=WARN', u'keystonemiddleware=WARN', u'routes.middleware=WARN', u'stevedore=WARN', u'taskflow=WARN', u'keystoneauth=WARN', u'oslo.cache=INFO', u'dogpile.core.dogpile=INFO']

list value

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

default_volume_type = None

string value

Default volume type to use

driver_client_cert = None

string value

The path to the client certificate for verification, if the driver supports it.

driver_client_cert_key = None

string value

The path to the client certificate key for verification, if the driver supports it.

driver_data_namespace = None

string value

Namespace for driver private data values to be saved in.

driver_ssl_cert_path = None

string value

Can be used to specify a non default path to a CA_BUNDLE file or directory with certificates of trusted CAs, which will be used to validate the backend

driver_ssl_cert_verify = False

boolean value

If set to True the http client will validate the SSL certificate of the backend endpoint.

driver_use_ssl = False

boolean value

Tell driver to use SSL for connection to backend storage if the driver supports it.

enable_force_upload = False

boolean value

Enables the Force option on upload_to_image. This enables running upload_volume on in-use volumes for backends that support it.

enable_new_services = True

boolean value

Services to be added to the available pool on create

enable_unsupported_driver = False

boolean value

Set this to True when you want to allow an unsupported driver to start. Drivers that haven’t maintained a working CI system and testing are marked as unsupported until CI is working again. This also marks a driver as deprecated and may be removed in the next release.

enable_v2_api = True

boolean value

DEPRECATED: Deploy v2 of the Cinder API.

enable_v3_api = True

boolean value

Deploy v3 of the Cinder API.

enabled_backends = None

list value

A list of backend names to use. These backend names should be backed by a unique [CONFIG] group with its options

enforce_multipath_for_image_xfer = False

boolean value

If this is set to True, attachment of volumes for image transfer will be aborted when multipathd is not running. Otherwise, it will fallback to single path.

executor_thread_pool_size = 64

integer value

Size of executor thread pool when executor is threading or eventlet.

fatal_deprecations = False

boolean value

Enables or disables fatal status of deprecations.

fatal_exception_format_errors = False

boolean value

Make exception message format errors fatal.

filter_function = None

string value

String representation for an equation that will be used to filter hosts. Only used when the driver filter is set to be used by the Cinder scheduler.

glance_api_insecure = False

boolean value

Allow to perform insecure SSL (https) requests to glance (https will be used but cert validation will not be performed).

glance_api_servers = None

list value

A list of the URLs of glance API servers available to cinder ([http[s]://][hostname|ip]:port). If protocol is not specified it defaults to http.

glance_api_ssl_compression = False

boolean value

Enables or disables negotiation of SSL layer compression. In some cases disabling compression can improve data throughput, such as when high network bandwidth is available and you use compressed image formats like qcow2.

glance_ca_certificates_file = None

string value

Location of ca certificates file to use for glance client requests.

glance_catalog_info = image:glance:publicURL

string value

Info to match when looking for glance in the service catalog. Format is: separated values of the form: <service_type>:<service_name>:<endpoint_type> - Only used if glance_api_servers are not provided.

glance_core_properties = [u'checksum', u'container_format', u'disk_format', u'image_name', u'image_id', u'min_disk', u'min_ram', u'name', u'size']

list value

Default core properties of image

glance_num_retries = 0

integer value

Number retries when downloading an image from glance

glance_request_timeout = None

integer value

http/https timeout value for glance operations. If no value (None) is supplied here, the glanceclient default value is used.

glusterfs_backup_mount_point = $state_path/backup_mount

string value

Base dir containing mount point for gluster share.

glusterfs_backup_share = None

string value

GlusterFS share in <hostname|ipv4addr|ipv6addr>:<gluster_vol_name> format. Eg: 1.2.3.4:backup_vol

goodness_function = None

string value

String representation for an equation that will be used to determine the goodness of a host. Only used when using the goodness weigher is set to be used by the Cinder scheduler.

graceful_shutdown_timeout = 60

integer value

Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait.

group_api_class = cinder.group.api.API

string value

The full class name of the group API class

host = ccsosp-undercloud.usersys.redhat.com

unknown value

Name of this node. This can be an opaque identifier. It is not necessarily a host name, FQDN, or IP address.

iet_conf = /etc/iet/ietd.conf

string value

IET configuration file

image_conversion_dir = $state_path/conversion

string value

Directory used for temporary storage during image conversion

image_upload_use_cinder_backend = False

boolean value

If set to True, upload-to-image in raw format will create a cloned volume and register its location to the image service, instead of uploading the volume content. The cinder backend and locations support must be enabled in the image service.

image_upload_use_internal_tenant = False

boolean value

If set to True, the image volume created by upload-to-image will be placed in the internal tenant. Otherwise, the image volume is created in the current context’s tenant.

image_volume_cache_enabled = False

boolean value

Enable the image volume cache for this backend.

image_volume_cache_max_count = 0

integer value

Max number of entries allowed in the image volume cache. 0 ⇒ unlimited.

image_volume_cache_max_size_gb = 0

integer value

Max size of the image volume cache for this backend in GB. 0 ⇒ unlimited.

`instance_format = [instance: %(uuid)s] `

string value

The format for an instance that is passed with the log message.

`instance_uuid_format = [instance: %(uuid)s] `

string value

The format for an instance UUID that is passed with the log message.

instorage_mcs_allow_tenant_qos = False

boolean value

Allow tenants to specify QOS on create

instorage_mcs_iscsi_chap_enabled = True

boolean value

Configure CHAP authentication for iSCSI connections (Default: Enabled)

instorage_mcs_localcopy_rate = 50

integer value

Specifies the InStorage LocalCopy copy rate to be used when creating a full volume copy. The default is rate is 50, and the valid rates are 1-100.

instorage_mcs_localcopy_timeout = 120

integer value

Maximum number of seconds to wait for LocalCopy to be prepared.

instorage_mcs_vol_autoexpand = True

boolean value

Storage system autoexpand parameter for volumes (True/False)

instorage_mcs_vol_compression = False

boolean value

Storage system compression option for volumes

instorage_mcs_vol_grainsize = 256

integer value

Storage system grain size parameter for volumes (32/64/128/256)

instorage_mcs_vol_intier = True

boolean value

Enable InTier for volumes

instorage_mcs_vol_iogrp = 0

string value

The I/O group in which to allocate volumes. It can be a comma-separated list in which case the driver will select an io_group based on least number of volumes associated with the io_group.

instorage_mcs_vol_rsize = 2

integer value

Storage system space-efficiency parameter for volumes (percentage)

instorage_mcs_vol_warning = 0

integer value

Storage system threshold for volume capacity warnings (percentage)

instorage_mcs_volpool_name = [u'volpool']

list value

Comma separated list of storage system storage pools for volumes.

instorage_san_secondary_ip = None

string value

Specifies secondary management IP or hostname to be used if san_ip is invalid or becomes inaccessible.

iscsi_iotype = fileio

string value

Sets the behavior of the iSCSI target to either perform blockio or fileio optionally, auto can be set and Cinder will autodetect type of backing device

iscsi_secondary_ip_addresses = []

list value

The list of secondary IP addresses of the iSCSI daemon

`iscsi_target_flags = `

string value

Sets the target-specific flags for the iSCSI target. Only used for tgtadm to specify backing device flags using bsoflags option. The specified string is passed as is to the underlying tool.

iscsi_write_cache = on

string value

Sets the behavior of the iSCSI target to either perform write-back(on) or write-through(off). This parameter is valid if target_helper is set to tgtadm.

iser_helper = tgtadm

string value

The name of the iSER target user-land tool to use

iser_ip_address = $my_ip

string value

The IP address that the iSER daemon is listening on

iser_port = 3260

port value

The port that the iSER daemon is listening on

iser_target_prefix = iqn.2010-10.org.openstack:

string value

Prefix for iSER volumes

keystone_catalog_info = identity:Identity Service:publicURL

string value

Info to match when looking for keystone in the service catalog. Format is: separated values of the form: <service_type>:<service_name>:<endpoint_type> - Only used if backup_swift_auth_url is unset

log-config-append = None

string value

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, logging_context_format_string).

log-date-format = %Y-%m-%d %H:%M:%S

string value

Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.

log-dir = None

string value

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

log-file = None

string value

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

log_options = True

boolean value

Enables or disables logging values of all registered options when starting a service (at DEBUG level).

logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

string value

Format string to use for log messages with context.

logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d

string value

Additional data to append to log message when logging level for the message is DEBUG.

logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

string value

Format string to use for log messages when context is undefined.

logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

string value

Prefix each line of exception output with this format.

logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

string value

Defines the format string for %(user_identity)s that is used in logging_context_format_string.

max_age = 0

integer value

Number of seconds between subsequent usage refreshes

max_header_line = 16384

integer value

Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens (typically those generated when keystone is configured to use PKI tokens with big service catalogs).

max_over_subscription_ratio = 20.0

string value

Representation of the over subscription ratio when thin provisioning is enabled. Default ratio is 20.0, meaning provisioned capacity can be 20 times of the total physical capacity. If the ratio is 10.5, it means provisioned capacity can be 10.5 times of the total physical capacity. A ratio of 1.0 means provisioned capacity cannot exceed the total physical capacity. If ratio is auto, Cinder will automatically calculate the ratio based on the provisioned capacity and the used space. If not set to auto, the ratio has to be a minimum of 1.0.

message_reap_interval = 86400

integer value

interval between periodic task runs to clean expired messages in seconds.

message_ttl = 2592000

integer value

message minimum life in seconds.

migration_create_volume_timeout_secs = 300

integer value

Timeout for creating the volume to migrate to when performing volume migration (seconds)

monkey_patch = False

boolean value

Enable monkey patching

monkey_patch_modules = []

list value

List of modules/decorators to monkey patch

my_ip = 10.65.176.99

unknown value

IP address of this host

no_snapshot_gb_quota = False

boolean value

Whether snapshots count against gigabyte quota

num_iser_scan_tries = 3

integer value

The maximum number of times to rescan iSER targetto find volume

num_shell_tries = 3

integer value

Number of times to attempt to run flakey shell commands

num_volume_device_scan_tries = 3

integer value

The maximum number of times to rescan targets to find volume

osapi_max_limit = 1000

integer value

The maximum number of items that a collection resource returns in a single response

osapi_volume_ext_list = []

list value

Specify list of extensions to load when using osapi_volume_extension option with cinder.api.contrib.select_extensions

osapi_volume_extension = [u'cinder.api.contrib.standard_extensions']

multi valued

osapi volume extension to load

osapi_volume_listen = 0.0.0.0

string value

IP address on which OpenStack Volume API listens

osapi_volume_listen_port = 8776

port value

Port on which OpenStack Volume API listens

osapi_volume_use_ssl = False

boolean value

Wraps the socket in a SSL context if True is set. A certificate file and key file must be specified.

osapi_volume_workers = None

integer value

Number of workers for OpenStack Volume API service. The default is equal to the number of CPUs available.

per_volume_size_limit = -1

integer value

Max size allowed per volume, in gigabytes

periodic_fuzzy_delay = 60

integer value

Range, in seconds, to randomly delay when starting the periodic task scheduler to reduce stampeding. (Disable by setting to 0)

periodic_interval = 60

integer value

Interval, in seconds, between running periodic tasks

public_endpoint = None

string value

Public url to use for versions endpoint. The default is None, which will use the request’s host_url attribute to populate the URL base. If Cinder is operating behind a proxy, you will want to change this to represent the proxy’s URL.

publish_errors = False

boolean value

Enables or disables publication of error events.

query_volume_filters = [u'name', u'status', u'metadata', u'availability_zone', u'bootable', u'group_id']

list value

Volume filter options which non-admin user could use to query volumes. Default values are: [name, status, metadata, availability_zone ,bootable, group_id]

quota_backup_gigabytes = 1000

integer value

Total amount of storage, in gigabytes, allowed for backups per project

quota_backups = 10

integer value

Number of volume backups allowed per project

quota_consistencygroups = 10

integer value

Number of consistencygroups allowed per project

quota_driver = cinder.quota.DbQuotaDriver

string value

Default driver to use for quota checks

quota_gigabytes = 1000

integer value

Total amount of storage, in gigabytes, allowed for volumes and snapshots per project

quota_groups = 10

integer value

Number of groups allowed per project

quota_snapshots = 10

integer value

Number of volume snapshots allowed per project

quota_volumes = 10

integer value

Number of volumes allowed per project

rate_limit_burst = 0

integer value

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level = CRITICAL

string value

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

rate_limit_interval = 0

integer value

Interval, number of seconds, of log rate limiting.

replication_device = None

dict value

Multi opt of dictionaries to represent a replication target device. This option may be specified multiple times in a single config section to specify multiple replication target devices. Each entry takes the standard dict config form: replication_device = target_device_id:<required>,key1:value1,key2:value2…​

report_discard_supported = False

boolean value

Report to clients of Cinder that the backend supports discard (aka. trim/unmap). This will not actually change the behavior of the backend or the client directly, it will only notify that it can be used.

report_interval = 10

integer value

Interval, in seconds, between nodes reporting state to datastore

reservation_clean_interval = $reservation_expire

integer value

Interval between periodic task runs to clean expired reservations in seconds.

reservation_expire = 86400

integer value

Number of seconds until a reservation expires

reserved_percentage = 0

integer value

The percentage of backend capacity is reserved

resource_query_filters_file = /etc/cinder/resource_filters.json

string value

Json file indicating user visible filter parameters for list queries.

restore_discard_excess_bytes = True

boolean value

If True, always discard excess bytes when restoring volumes i.e. pad with zeroes.

rootwrap_config = /etc/cinder/rootwrap.conf

string value

Path to the rootwrap configuration file to use for running commands as root

rpc_ack_timeout_base = 15

integer value

Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.

rpc_ack_timeout_multiplier = 2

integer value

Number to multiply base ack timeout by after each retry attempt.

rpc_backend = rabbit

string value

The messaging driver to use, defaults to rabbit. Other drivers include amqp and zmq.

rpc_conn_pool_size = 30

integer value

Size of RPC connection pool.

rpc_message_ttl = 300

integer value

Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server.

rpc_poll_timeout = 1

integer value

The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.

rpc_response_timeout = 60

integer value

Seconds to wait for a response from a call.

rpc_retry_attempts = 3

integer value

Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries, None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled.

rpc_thread_pool_size = 100

integer value

Maximum number of (green) threads to work concurrently.

rpc_use_acks = False

boolean value

Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB.

rpc_zmq_bind_address = *

string value

ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or resolve to this address.

rpc_zmq_bind_port_retries = 100

integer value

Number of retries to find free port number before fail with ZMQBindError.

rpc_zmq_contexts = 1

integer value

Number of ZeroMQ contexts, defaults to 1.

rpc_zmq_host = ccsosp-undercloud.usersys.redhat.com

string value

Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova.

rpc_zmq_ipc_dir = /var/run/openstack

string value

Directory for holding IPC sockets.

rpc_zmq_matchmaker = redis

string value

MatchMaker driver.

rpc_zmq_max_port = 65536

integer value

Maximal port number for random ports range.

rpc_zmq_min_port = 49153

port value

Minimal port number for random ports range.

rpc_zmq_serialization = json

string value

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

rpc_zmq_topic_backlog = None

integer value

Maximum number of ingress messages to locally buffer per topic. Default is unlimited.

run_external_periodic_tasks = True

boolean value

Some periodic tasks can be run in a separate process. Should we run them here?

scheduler_default_filters = [u'AvailabilityZoneFilter', u'CapacityFilter', u'CapabilitiesFilter']

list value

Which filter class names to use for filtering hosts when not specified in the request.

scheduler_default_weighers = [u'CapacityWeigher']

list value

Which weigher class names to use for weighing hosts.

scheduler_driver = cinder.scheduler.filter_scheduler.FilterScheduler

string value

Default scheduler driver to use

scheduler_host_manager = cinder.scheduler.host_manager.HostManager

string value

The scheduler host manager class to use

`scheduler_json_config_location = `

string value

Absolute path to scheduler configuration JSON file.

scheduler_manager = cinder.scheduler.manager.SchedulerManager

string value

Full class name for the Manager for scheduler

scheduler_max_attempts = 3

integer value

Maximum number of attempts to schedule a volume

scheduler_weight_handler = cinder.scheduler.weights.OrderedHostWeightHandler

string value

Which handler to use for selecting the host/pool after weighing

scst_target_driver = iscsi

string value

SCST target implementation can choose from multiple SCST target drivers.

scst_target_iqn_name = None

string value

Certain ISCSI targets have predefined target names, SCST target driver uses this name.

service_down_time = 60

integer value

Maximum time since last check-in for a service to be considered up

snapshot_name_template = snapshot-%s

string value

Template string to be used to generate snapshot names

snapshot_same_host = True

boolean value

Create volume from snapshot at the host where snapshot resides

ssh_hosts_key_file = $state_path/ssh_known_hosts

string value

File containing SSH host keys for the systems with which Cinder needs to communicate. OPTIONAL: Default=$state_path/ssh_known_hosts

state_path = /var/lib/cinder

string value

Top-level directory for maintaining cinder’s state

storage_availability_zone = nova

string value

Availability zone of this node. Can be overridden per volume backend with the option "backend_availability_zone".

storage_protocol = iscsi

string value

Protocol for transferring data between host and storage back-end.

storpool_replication = 3

integer value

The default StorPool chain replication value. Used when creating a volume with no specified type if storpool_template is not set. Also used for calculating the apparent free space reported in the stats.

storpool_template = None

string value

The StorPool template for volumes with no type.

strict_ssh_host_key_policy = False

boolean value

Option to enable strict host key checking. When set to "True" Cinder will only connect to systems with a host key present in the configured "ssh_hosts_key_file". When set to "False" the host key will be saved upon first connection and used for subsequent connections. Default=False

subscribe_on = []

list value

List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the matchmaker.

swift_catalog_info = object-store:swift:publicURL

string value

Info to match when looking for swift in the service catalog. Format is: separated values of the form: <service_type>:<service_name>:<endpoint_type> - Only used if backup_swift_url is unset

syslog-log-facility = LOG_USER

string value

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

target_helper = tgtadm

string value

iSCSI target user-land tool to use. tgtadm is default, use lioadm for LIO iSCSI support, scstadmin for SCST target support, ietadm for iSCSI Enterprise Target, iscsictl for Chelsio iSCSI Target or fake for testing.

target_ip_address = $my_ip

string value

The IP address that the iSCSI daemon is listening on

target_port = 3260

port value

The port that the iSCSI daemon is listening on

target_prefix = iqn.2010-10.org.openstack:

string value

Prefix for iSCSI volumes

target_protocol = iscsi

string value

Determines the iSCSI protocol for new iSCSI volumes, created with tgtadm or lioadm target helpers. In order to enable RDMA, this parameter should be set with the value "iser". The supported iSCSI protocol values are "iscsi" and "iser".

tcp_keepalive = True

boolean value

Sets the value of TCP_KEEPALIVE (True/False) for each server socket.

tcp_keepalive_count = None

integer value

Sets the value of TCP_KEEPCNT for each server socket. Not supported on OS X.

tcp_keepalive_interval = None

integer value

Sets the value of TCP_KEEPINTVL in seconds for each server socket. Not supported on OS X.

tcp_keepidle = 600

integer value

Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not supported on OS X.

trace_flags = None

list value

List of options that control which trace info is written to the DEBUG log level to assist developers. Valid values are method and api.

transfer_api_class = cinder.transfer.api.API

string value

The full class name of the volume transfer API class

transport_url = None

string value

The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:

driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query

Example: rabbit://rabbitmq:password@127.0.0.1:5672//

For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html

until_refresh = 0

integer value

Count of reservations until usage is refreshed

use-journal = False

boolean value

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

use-json = False

boolean value

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use-syslog = False

boolean value

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_chap_auth = False

boolean value

Option to enable/disable CHAP authentication for targets.

use_default_quota_class = True

boolean value

Enables or disables use of default quota class with default quota.

use_dynamic_connections = False

boolean value

This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct connections for direct message types (ignored otherwise).

use_forwarded_for = False

boolean value

Treat X-Forwarded-For as the canonical remote address. Only enable this if you have a sanitizing proxy.

use_multipath_for_image_xfer = False

boolean value

Do we attach/detach volumes in cinder using multipath for volume to image and image to volume transfers?

use_pub_sub = False

boolean value

Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.

use_router_proxy = False

boolean value

Use ROUTER remote proxy.

use_stderr = False

boolean value

Log output to standard error. This option is ignored if log_config_append is set.

volume_api_class = cinder.volume.api.API

string value

The full class name of the volume API class to use

volume_backend_name = None

string value

The backend name for a given driver implementation

volume_clear = zero

string value

Method used to wipe old volumes

volume_clear_ionice = None

string value

The flag to pass to ionice to alter the i/o priority of the process used to zero a volume after deletion, for example "-c3" for idle only priority.

volume_clear_size = 0

integer value

Size in MiB to wipe at start of old volumes. 1024 MiBat max. 0 ⇒ all

volume_copy_blkio_cgroup_name = cinder-volume-copy

string value

The blkio cgroup name to be used to limit bandwidth of volume copy

volume_copy_bps_limit = 0

integer value

The upper limit of bandwidth of volume copy. 0 ⇒ unlimited

volume_dd_blocksize = 1M

string value

The default block size used when copying/clearing volumes

volume_manager = cinder.volume.manager.VolumeManager

string value

Full class name for the Manager for volume

volume_name_template = volume-%s

string value

Template string to be used to generate volume names

volume_number_multiplier = -1.0

floating point value

Multiplier used for weighing volume number. Negative numbers mean to spread vs stack.

volume_service_inithost_offload = False

boolean value

Offload pending volume delete during volume service startup

volume_transfer_key_length = 16

integer value

The number of characters in the autogenerated auth key.

volume_transfer_salt_length = 8

integer value

The number of characters in the salt.

volume_usage_audit_period = month

string value

Time period for which to generate volume usages. The options are hour, day, month, or year.

volumes_dir = $state_path/volumes

string value

Volume configuration file storage directory

watch-log-file = False

boolean value

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

wsgi_default_pool_size = 100

integer value

Size of the pool of greenthreads used by wsgi

wsgi_keep_alive = True

boolean value

If False, closes the client socket connection explicitly.

wsgi_log_format = %(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f

string value

A python format string that is used as the template to generate log lines. The following values can beformatted into it: client_ip, date_time, request_line, status_code, body_length, wall_seconds.

zmq_failover_connections = 2

integer value

How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.

zmq_immediate = True

boolean value

This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it.

zmq_linger = -1

integer value

Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Positive values specify an upper bound for the linger period.

zmq_target_expire = 300

integer value

Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).

zmq_target_update = 180

integer value

Update period in seconds of a name service record about existing target.

zmq_tcp_keepalive = -1

integer value

Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively.

zmq_tcp_keepalive_cnt = -1

integer value

The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_idle = -1

integer value

The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_intvl = -1

integer value

The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zoning_mode = None

string value

FC Zoning mode configured, only fabric is supported now.

3.1.2. backend

The following table outlines the options available under the [backend] group in the /etc/cinder/cinder.conf file.

Table 3.2. backend

Configuration option = Default valueTypeDescription

backend_host = None

string value

Backend override of host value.

3.1.3. backend_defaults

The following table outlines the options available under the [backend_defaults] group in the /etc/cinder/cinder.conf file.

Table 3.3. backend_defaults

Configuration option = Default valueTypeDescription

auto_calc_max_oversubscription_ratio = False

boolean value

K2 driver will calculate max_oversubscription_ratio on setting this option as True.

backend_availability_zone = None

string value

Availability zone for this volume backend. If not set, the storage_availability_zone option value is used as the default for all backends.

backend_native_threads_pool_size = 20

integer value

Size of the native threads pool for the backend. Increase for backends that heavily rely on this, like the RBD driver.

backup_use_temp_snapshot = False

boolean value

If this is set to True, a temporary snapshot will be created for performing non-disruptive backups. Otherwise a temporary volume will be cloned in order to perform a backup.

chap = disabled

string value

CHAP authentication mode, effective only for iscsi (disabled|enabled)

`chap_password = `

string value

Password for specified CHAP account name.

`chap_username = `

string value

CHAP user name.

check_max_pool_luns_threshold = False

boolean value

Report free_capacity_gb as 0 when the limit to maximum number of pool LUNs is reached. By default, the value is False.

chiscsi_conf = /etc/chelsio-iscsi/chiscsi.conf

string value

Chiscsi (CXT) global defaults configuration file

cinder_dell_emc_config_file = /etc/cinder/cinder_dell_emc_config.xml

string value

Use this file for cinder emc plugin config data.

cinder_eternus_config_file = /etc/cinder/cinder_fujitsu_eternus_dx.xml

string value

config file for cinder eternus_dx volume driver

cinder_huawei_conf_file = /etc/cinder/cinder_huawei_conf.xml

string value

The configuration file for the Cinder Huawei driver.

clone_volume_timeout = 680

integer value

Create clone volume timeout.

connection_type = iscsi

string value

Connection type to the IBM Storage Array

coprhd_emulate_snapshot = False

boolean value

True | False to indicate if the storage array in CoprHD is VMAX or VPLEX

coprhd_hostname = None

string value

Hostname for the CoprHD Instance

coprhd_password = None

string value

Password for accessing the CoprHD Instance

coprhd_port = 4443

port value

Port for the CoprHD Instance

coprhd_project = None

string value

Project to utilize within the CoprHD Instance

coprhd_scaleio_rest_gateway_host = None

string value

Rest Gateway IP or FQDN for Scaleio

coprhd_scaleio_rest_gateway_port = 4984

port value

Rest Gateway Port for Scaleio

coprhd_scaleio_rest_server_password = None

string value

Rest Gateway Password

coprhd_scaleio_rest_server_username = None

string value

Username for Rest Gateway

coprhd_tenant = None

string value

Tenant to utilize within the CoprHD Instance

coprhd_username = None

string value

Username for accessing the CoprHD Instance

coprhd_varray = None

string value

Virtual Array to utilize within the CoprHD Instance

cycle_period_seconds = 300

integer value

This defines an optional cycle period that applies to Global Mirror relationships with a cycling mode of multi. A Global Mirror relationship using the multi cycling_mode performs a complete cycle at most once each period. The default is 300 seconds, and the valid seconds are 60-86400.

datera_503_interval = 5

integer value

Interval between 503 retries

datera_503_timeout = 120

integer value

Timeout for HTTP 503 retry messages

datera_api_port = 7717

string value

Datera API port.

datera_api_version = 2

string value

Datera API version.

datera_debug = False

boolean value

True to set function arg and return logging

datera_debug_replica_count_override = False

boolean value

ONLY FOR DEBUG/TESTING PURPOSES True to set replica_count to 1

datera_disable_profiler = False

boolean value

Set to True to disable profiling in the Datera driver

datera_tenant_id = None

string value

If set to Map -→ OpenStack project ID will be mapped implicitly to Datera tenant ID If set to None -→ Datera tenant ID will not be used during volume provisioning If set to anything else -→ Datera tenant ID will be the provided value

default_timeout = 31536000

integer value

Default timeout for CLI operations in minutes. For example, LUN migration is a typical long running operation, which depends on the LUN size and the load of the array. An upper bound in the specific deployment can be set to avoid unnecessary long wait. By default, it is 365 days long.

dell_sc_api_port = 3033

port value

Dell API port

dell_sc_server_folder = openstack

string value

Name of the server folder to use on the Storage Center

dell_sc_ssn = 64702

integer value

Storage Center System Serial Number

dell_sc_verify_cert = False

boolean value

Enable HTTPS SC certificate verification

dell_sc_volume_folder = openstack

string value

Name of the volume folder to use on the Storage Center

dell_server_os = Red Hat Linux 6.x

string value

Server OS type to use when creating a new server on the Storage Center.

destroy_empty_storage_group = False

boolean value

To destroy storage group when the last LUN is removed from it. By default, the value is False.

disable_discovery = False

boolean value

Disabling iSCSI discovery (sendtargets) for multipath connections on K2 driver.

disco_choice_client = None

string value

Use soap client or rest client for communicating with DISCO. Possible values are "soap" or "rest".

disco_client = 127.0.0.1

IP address value

The IP of DMS client socket server

disco_client_port = 9898

port value

The port to connect DMS client socket server

disco_clone_check_timeout = 3600

integer value

How long we check whether a clone is finished before we give up

disco_rest_ip = None

IP address value

The IP address of the REST server

disco_restore_check_timeout = 3600

integer value

How long we check whether a restore is finished before we give up

disco_retry_interval = 1

integer value

How long we wait before retrying to get an item detail

disco_snapshot_check_timeout = 3600

integer value

How long we check whether a snapshot is finished before we give up

disco_src_api_port = 8080

port value

The port of DISCO source API

disco_volume_name_prefix = openstack-

string value

Prefix before volume name to differentiate DISCO volume created through openstack and the other ones

disco_wsdl_path = /etc/cinder/DISCOService.wsdl

string value

Path to the wsdl file to communicate with DISCO request manager

`dpl_pool = `

string value

DPL pool uuid in which DPL volumes are stored.

dpl_port = 8357

port value

DPL port number.

drbdmanage_devs_on_controller = True

boolean value

If set, the c-vol node will receive a useable /dev/drbdX device, even if the actual data is stored on other nodes only. This is useful for debugging, maintenance, and to be able to do the iSCSI export from the c-vol node.

drbdmanage_disk_options = {"c-min-rate": "4M"}

string value

Disk options to set on new resources. See http://www.drbd.org/en/doc/users-guide-90/re-drbdconf for all the details.

drbdmanage_net_options = {"connect-int": "4", "allow-two-primaries": "yes", "ko-count": "30", "max-buffers": "20000", "ping-timeout": "100"}

string value

Net options to set on new resources. See http://www.drbd.org/en/doc/users-guide-90/re-drbdconf for all the details.

drbdmanage_redundancy = 1

integer value

Number of nodes that should replicate the data.

drbdmanage_resize_plugin = drbdmanage.plugins.plugins.wait_for.WaitForVolumeSize

string value

Volume resize completion wait plugin.

drbdmanage_resize_policy = {"timeout": "60"}

string value

Volume resize completion wait policy.

drbdmanage_resource_options = {"auto-promote-timeout": "300"}

string value

Resource options to set on new resources. See http://www.drbd.org/en/doc/users-guide-90/re-drbdconf for all the details.

drbdmanage_resource_plugin = drbdmanage.plugins.plugins.wait_for.WaitForResource

string value

Resource deployment completion wait plugin.

drbdmanage_resource_policy = {"ratio": "0.51", "timeout": "60"}

string value

Resource deployment completion wait policy.

drbdmanage_snapshot_plugin = drbdmanage.plugins.plugins.wait_for.WaitForSnapshot

string value

Snapshot completion wait plugin.

drbdmanage_snapshot_policy = {"count": "1", "timeout": "60"}

string value

Snapshot completion wait policy.

driver_client_cert = None

string value

The path to the client certificate for verification, if the driver supports it.

driver_client_cert_key = None

string value

The path to the client certificate key for verification, if the driver supports it.

driver_data_namespace = None

string value

Namespace for driver private data values to be saved in.

driver_ssl_cert_path = None

string value

Can be used to specify a non default path to a CA_BUNDLE file or directory with certificates of trusted CAs, which will be used to validate the backend

driver_ssl_cert_verify = False

boolean value

If set to True the http client will validate the SSL certificate of the backend endpoint.

driver_use_ssl = False

boolean value

Tell driver to use SSL for connection to backend storage if the driver supports it.

`ds8k_devadd_unitadd_mapping = `

string value

Mapping between IODevice address and unit address.

ds8k_host_type = auto

string value

Set to zLinux if your OpenStack version is prior to Liberty and you’re connecting to zLinux systems. Otherwise set to auto. Valid values for this parameter are: auto, AMDLinuxRHEL, AMDLinuxSuse, AppleOSX, Fujitsu, Hp, HpTru64, HpVms, LinuxDT, LinuxRF, LinuxRHEL, LinuxSuse, Novell, SGI, SVC, SanFsAIX, SanFsLinux, Sun, VMWare, Win2000, Win2003, Win2008, Win2012, iLinux, nSeries, pLinux, pSeries, pSeriesPowerswap, zLinux, iSeries.

ds8k_ssid_prefix = FF

string value

Set the first two digits of SSID.

dsware_isthin = False

boolean value

The flag of thin storage allocation.

`dsware_manager = `

string value

Fusionstorage manager ip addr for cinder-volume.

enable_unsupported_driver = False

boolean value

Set this to True when you want to allow an unsupported driver to start. Drivers that haven’t maintained a working CI system and testing are marked as unsupported until CI is working again. This also marks a driver as deprecated and may be removed in the next release.

enforce_multipath_for_image_xfer = False

boolean value

If this is set to True, attachment of volumes for image transfer will be aborted when multipathd is not running. Otherwise, it will fallback to single path.

eqlx_cli_max_retries = 5

integer value

Maximum retry count for reconnection. Default is 5.

eqlx_group_name = group-0

string value

Group name to use for creating volumes. Defaults to "group-0".

eqlx_pool = default

string value

Pool in which volumes will be created. Defaults to "default".

excluded_domain_ip = None

IP address value

Domain IP to be excluded from iSCSI returns.

expiry_thres_minutes = 720

integer value

This option specifies the threshold for last access time for images in the NFS image cache. When a cache cleaning cycle begins, images in the cache that have not been accessed in the last M minutes, where M is the value of this parameter, will be deleted from the cache to create free space on the NFS share.

extra_capabilities = {}

string value

User defined capabilities, a JSON formatted string specifying key/value pairs. The key/value pairs can be used by the CapabilitiesFilter to select between backends when requests specify volume types. For example, specifying a service level or the geographical location of a backend, then creating a volume type to allow the user to select by these different properties.

filter_function = None

string value

String representation for an equation that will be used to filter hosts. Only used when the driver filter is set to be used by the Cinder scheduler.

flashsystem_connection_protocol = FC

string value

Connection protocol should be FC. (Default is FC.)

flashsystem_iscsi_portid = 0

integer value

Default iSCSI Port ID of FlashSystem. (Default port is 0.)

flashsystem_multihostmap_enabled = True

boolean value

Allows vdisk to multi host mapping. (Default is True)

flashsystem_multipath_enabled = False

boolean value

This option no longer has any affect. It is deprecated and will be removed in the next release.

force_delete_lun_in_storagegroup = False

boolean value

Delete a LUN even if it is in Storage Groups. By default, the value is False.

`fusionstorageagent = `

string value

Fusionstorage agent ip addr range.

goodness_function = None

string value

String representation for an equation that will be used to determine the goodness of a host. Only used when using the goodness weigher is set to be used by the Cinder scheduler.

gpfs_hosts = []

list value

Comma-separated list of IP address or hostnames of GPFS nodes.

gpfs_hosts_key_file = $state_path/ssh_known_hosts

string value

File containing SSH host keys for the gpfs nodes with which driver needs to communicate. Default=$state_path/ssh_known_hosts

gpfs_images_dir = None

string value

Specifies the path of the Image service repository in GPFS. Leave undefined if not storing images in GPFS.

gpfs_images_share_mode = None

string value

Specifies the type of image copy to be used. Set this when the Image service repository also uses GPFS so that image files can be transferred efficiently from the Image service to the Block Storage service. There are two valid values: "copy" specifies that a full copy of the image is made; "copy_on_write" specifies that copy-on-write optimization strategy is used and unmodified blocks of the image file are shared efficiently.

gpfs_max_clone_depth = 0

integer value

Specifies an upper limit on the number of indirections required to reach a specific block due to snapshots or clones. A lengthy chain of copy-on-write snapshots or clones can have a negative impact on performance, but improves space utilization. 0 indicates unlimited clone depth.

gpfs_mount_point_base = None

string value

Specifies the path of the GPFS directory where Block Storage volume and snapshot files are stored.

`gpfs_private_key = `

string value

Filename of private key to use for SSH authentication.

gpfs_sparse_volumes = True

boolean value

Specifies that volumes are created as sparse files which initially consume no space. If set to False, the volume is created as a fully allocated file, in which case, creation may take a significantly longer time.

gpfs_ssh_port = 22

port value

SSH port to use.

gpfs_storage_pool = system

string value

Specifies the storage pool that volumes are assigned to. By default, the system storage pool is used.

gpfs_strict_host_key_policy = False

boolean value

Option to enable strict gpfs host key checking while connecting to gpfs nodes. Default=False

gpfs_user_login = root

string value

Username for GPFS nodes.

`gpfs_user_password = `

string value

Password for GPFS node user.

hgst_net = Net 1 (IPv4)

string value

Space network name to use for data transfer

hgst_redundancy = 0

string value

Should spaces be redundantly stored (1/0)

hgst_space_group = disk

string value

Group to own created spaces

hgst_space_mode = 0600

string value

UNIX mode for created spaces

hgst_space_user = root

string value

User to own created spaces

hgst_storage_servers = os:gbd0

string value

Comma separated list of Space storage servers:devices. ex: os1_stor:gbd0,os2_stor:gbd0

`hpe3par_api_url = `

string value

3PAR WSAPI Server Url like https://<3par ip>:8080/api/v1

hpe3par_cpg = [u'OpenStack']

list value

List of the CPG(s) to use for volume creation

`hpe3par_cpg_snap = `

string value

The CPG to use for Snapshots for volumes. If empty the userCPG will be used.

hpe3par_debug = False

boolean value

Enable HTTP debugging to 3PAR

hpe3par_iscsi_chap_enabled = False

boolean value

Enable CHAP authentication for iSCSI connections.

hpe3par_iscsi_ips = []

list value

List of target iSCSI addresses to use.

`hpe3par_password = `

string value

3PAR password for the user specified in hpe3par_username

`hpe3par_snapshot_expiration = `

string value

The time in hours when a snapshot expires and is deleted. This must be larger than expiration

`hpe3par_snapshot_retention = `

string value

The time in hours to retain a snapshot. You can’t delete it before this expires.

`hpe3par_username = `

string value

3PAR username with the edit role

hpelefthand_api_url = None

uri value

HPE LeftHand WSAPI Server Url like https://<LeftHand ip>:8081/lhos

hpelefthand_clustername = None

string value

HPE LeftHand cluster name

hpelefthand_debug = False

boolean value

Enable HTTP debugging to LeftHand

hpelefthand_iscsi_chap_enabled = False

boolean value

Configure CHAP authentication for iSCSI connections (Default: Disabled)

hpelefthand_password = None

string value

HPE LeftHand Super user password

hpelefthand_ssh_port = 16022

port value

Port number of SSH service.

hpelefthand_username = None

string value

HPE LeftHand Super user username

hpmsa_api_protocol = https

string value

HPMSA API interface protocol.

hpmsa_backend_name = A

string value

Pool or Vdisk name to use for volume creation.

hpmsa_backend_type = virtual

string value

linear (for Vdisk) or virtual (for Pool).

hpmsa_iscsi_ips = []

list value

List of comma-separated target iSCSI IP addresses.

hpmsa_verify_certificate = False

boolean value

Whether to verify HPMSA array SSL certificate.

hpmsa_verify_certificate_path = None

string value

HPMSA array SSL certificate path.

hypermetro_devices = None

string value

The remote device hypermetro will use.

iet_conf = /etc/iet/ietd.conf

string value

IET configuration file

ignore_pool_full_threshold = False

boolean value

Force LUN creation even if the full threshold of pool is reached. By default, the value is False.

image_upload_use_cinder_backend = False

boolean value

If set to True, upload-to-image in raw format will create a cloned volume and register its location to the image service, instead of uploading the volume content. The cinder backend and locations support must be enabled in the image service.

image_upload_use_internal_tenant = False

boolean value

If set to True, the image volume created by upload-to-image will be placed in the internal tenant. Otherwise, the image volume is created in the current context’s tenant.

image_volume_cache_enabled = False

boolean value

Enable the image volume cache for this backend.

image_volume_cache_max_count = 0

integer value

Max number of entries allowed in the image volume cache. 0 ⇒ unlimited.

image_volume_cache_max_size_gb = 0

integer value

Max size of the image volume cache for this backend in GB. 0 ⇒ unlimited.

infinidat_iscsi_netspaces = []

list value

List of names of network spaces to use for iSCSI connectivity

infinidat_pool_name = None

string value

Name of the pool from which volumes are allocated

infinidat_storage_protocol = fc

string value

Protocol for transferring data between host and storage back-end.

infinidat_use_compression = False

boolean value

Specifies whether to turn on compression for newly created volumes.

initiator_auto_deregistration = False

boolean value

Automatically deregister initiators after the related storage group is destroyed. By default, the value is False.

initiator_auto_registration = False

boolean value

Automatically register initiators. By default, the value is False.

initiator_check = False

boolean value

Use this value to enable the initiator_check.

interval = 3

integer value

Use this value to specify length of the interval in seconds.

io_port_list = None

list value

Comma separated iSCSI or FC ports to be used in Nova or Cinder.

iscsi_initiators = None

string value

Mapping between hostname and its iSCSI initiator IP addresses.

iscsi_iotype = fileio

string value

Sets the behavior of the iSCSI target to either perform blockio or fileio optionally, auto can be set and Cinder will autodetect type of backing device

iscsi_secondary_ip_addresses = []

list value

The list of secondary IP addresses of the iSCSI daemon

`iscsi_target_flags = `

string value

Sets the target-specific flags for the iSCSI target. Only used for tgtadm to specify backing device flags using bsoflags option. The specified string is passed as is to the underlying tool.

iscsi_write_cache = on

string value

Sets the behavior of the iSCSI target to either perform write-back(on) or write-through(off). This parameter is valid if target_helper is set to tgtadm.

iser_helper = tgtadm

string value

The name of the iSER target user-land tool to use

iser_ip_address = $my_ip

string value

The IP address that the iSER daemon is listening on

iser_port = 3260

port value

The port that the iSER daemon is listening on

iser_target_prefix = iqn.2010-10.org.openstack:

string value

Prefix for iSER volumes

lenovo_api_protocol = https

string value

Lenovo api interface protocol.

lenovo_backend_name = A

string value

Pool or Vdisk name to use for volume creation.

lenovo_backend_type = virtual

string value

linear (for VDisk) or virtual (for Pool).

lenovo_iscsi_ips = []

list value

List of comma-separated target iSCSI IP addresses.

lenovo_verify_certificate = False

boolean value

Whether to verify Lenovo array SSL certificate.

lenovo_verify_certificate_path = None

string value

Lenovo array SSL certificate path.

`lss_range_for_cg = `

string value

Reserve LSSs for consistency group.

lvm_conf_file = /etc/cinder/lvm.conf

string value

LVM conf file to use for the LVM driver in Cinder; this setting is ignored if the specified file does not exist (You can also specify None to not use a conf file even if one exists).

lvm_max_over_subscription_ratio = None

floating point value

max_over_subscription_ratio setting for the LVM driver. If set to None (the default), the general max_over_subscription_ratio is used.

lvm_mirrors = 0

integer value

If >0, create LVs with multiple mirrors. Note that this requires lvm_mirrors + 2 PVs with available space

lvm_suppress_fd_warnings = False

boolean value

Suppress leaked file descriptor warnings in LVM commands.

lvm_type = auto

string value

Type of LVM volumes to deploy; (default, thin, or auto). Auto defaults to thin if thin is supported.

`management_ips = `

string value

List of Management IP addresses (separated by commas)

max_luns_per_storage_group = 255

integer value

Default max number of LUNs in a storage group. By default, the value is 255.

max_over_subscription_ratio = 20.0

string value

Representation of the over subscription ratio when thin provisioning is enabled. Default ratio is 20.0, meaning provisioned capacity can be 20 times of the total physical capacity. If the ratio is 10.5, it means provisioned capacity can be 10.5 times of the total physical capacity. A ratio of 1.0 means provisioned capacity cannot exceed the total physical capacity. If ratio is auto, Cinder will automatically calculate the ratio based on the provisioned capacity and the used space. If not set to auto, the ratio has to be a minimum of 1.0.

metro_domain_name = None

string value

The remote metro device domain name.

metro_san_address = None

string value

The remote metro device request url.

metro_san_password = None

string value

The remote metro device san password.

metro_san_user = None

string value

The remote metro device san user.

metro_storage_pools = None

string value

The remote metro device pool names.

`nas_host = `

string value

IP address or Hostname of NAS system.

nas_login = admin

string value

User name to connect to NAS system.

nas_mount_options = None

string value

Options used to mount the storage backend file system where Cinder volumes are stored.

`nas_password = `

string value

Password to connect to NAS system.

`nas_private_key = `

string value

Filename of private key to use for SSH authentication.

nas_secure_file_operations = auto

string value

Allow network-attached storage systems to operate in a secure environment where root level access is not permitted. If set to False, access is as the root user and insecure. If set to True, access is not as root. If set to auto, a check is done to determine if this is a new installation: True is used if so, otherwise False. Default is auto.

nas_secure_file_permissions = auto

string value

Set more secure file permissions on network-attached storage volume files to restrict broad other/world access. If set to False, volumes are created with open permissions. If set to True, volumes are created with permissions for the cinder user and group (660). If set to auto, a check is done to determine if this is a new installation: True is used if so, otherwise False. Default is auto.

`nas_share_path = `

string value

Path to the share to use for storing Cinder volumes. For example: "/srv/export1" for an NFS server export available at 10.0.5.10:/srv/export1 .

nas_ssh_port = 22

port value

SSH port to use to connect to NAS system.

nas_volume_prov_type = thin

string value

Provisioning type that will be used when creating volumes.

naviseccli_path = None

string value

Naviseccli Path.

netapp_api_trace_pattern = (.*)

string value

A regular expression to limit the API tracing. This option is honored only if enabling api tracing with the trace_flags option. By default, all APIs will be traced.

netapp_controller_ips = None

string value

This option is only utilized when the storage family is configured to eseries. This option is used to restrict provisioning to the specified controllers. Specify the value of this option to be a comma separated list of controller hostnames or IP addresses to be used for provisioning.

netapp_copyoffload_tool_path = None

string value

This option specifies the path of the NetApp copy offload tool binary. Ensure that the binary has execute permissions set which allow the effective user of the cinder-volume process to execute the file.

netapp_enable_multiattach = False

boolean value

This option specifies whether the driver should allow operations that require multiple attachments to a volume. An example would be live migration of servers that have volumes attached. When enabled, this backend is limited to 256 total volumes in order to guarantee volumes can be accessed by more than one host.

netapp_host_type = None

string value

This option defines the type of operating system for all initiators that can access a LUN. This information is used when mapping LUNs to individual hosts or groups of hosts.

netapp_login = None

string value

Administrative user account name used to access the storage system or proxy server.

netapp_lun_ostype = None

string value

This option defines the type of operating system that will access a LUN exported from Data ONTAP; it is assigned to the LUN at the time it is created.

netapp_lun_space_reservation = enabled

string value

This option determines if storage space is reserved for LUN allocation. If enabled, LUNs are thick provisioned. If space reservation is disabled, storage space is allocated on demand.

netapp_password = None

string value

Password for the administrative user account specified in the netapp_login option.

netapp_pool_name_search_pattern = (.+)

string value

This option is used to restrict provisioning to the specified pools. Specify the value of this option to be a regular expression which will be applied to the names of objects from the storage backend which represent pools in Cinder. This option is only utilized when the storage protocol is configured to use iSCSI or FC.

netapp_replication_aggregate_map = None

dict value

Multi opt of dictionaries to represent the aggregate mapping between source and destination back ends when using whole back end replication. For every source aggregate associated with a cinder pool (NetApp FlexVol), you would need to specify the destination aggregate on the replication target device. A replication target device is configured with the configuration option replication_device. Specify this option as many times as you have replication devices. Each entry takes the standard dict config form: netapp_replication_aggregate_map = backend_id:<name_of_replication_device_section>,src_aggr_name1:dest_aggr_name1,src_aggr_name2:dest_aggr_name2,…​

netapp_sa_password = None

string value

Password for the NetApp E-Series storage array.

netapp_server_hostname = None

string value

The hostname (or IP address) for the storage system or proxy server.

netapp_server_port = None

integer value

The TCP port to use for communication with the storage system or proxy server. If not specified, Data ONTAP drivers will use 80 for HTTP and 443 for HTTPS; E-Series will use 8080 for HTTP and 8443 for HTTPS.

netapp_size_multiplier = 1.2

floating point value

The quantity to be multiplied by the requested volume size to ensure enough space is available on the virtual storage server (Vserver) to fulfill the volume creation request. Note: this option is deprecated and will be removed in favor of "reserved_percentage" in the Mitaka release.

netapp_snapmirror_quiesce_timeout = 3600

integer value

The maximum time in seconds to wait for existing SnapMirror transfers to complete before aborting during a failover.

netapp_storage_family = ontap_cluster

string value

The storage family type used on the storage system; valid values are ontap_cluster for using clustered Data ONTAP, or eseries for using E-Series.

netapp_storage_protocol = None

string value

The storage protocol to be used on the data path with the storage system.

netapp_transport_type = http

string value

The transport protocol used when communicating with the storage system or proxy server.

netapp_vserver = None

string value

This option specifies the virtual storage server (Vserver) name on the storage cluster on which provisioning of block storage volumes should occur.

netapp_webservice_path = /devmgr/v2

string value

This option is used to specify the path to the E-Series proxy application on a proxy server. The value is combined with the value of the netapp_transport_type, netapp_server_hostname, and netapp_server_port options to create the URL used by the driver to connect to the proxy application.

nexenta_blocksize = 4096

integer value

Block size for datasets

nexenta_chunksize = 32768

integer value

NexentaEdge iSCSI LUN object chunk size

`nexenta_client_address = `

string value

NexentaEdge iSCSI Gateway client address for non-VIP service

nexenta_dataset_compression = on

string value

Compression value for new ZFS folders.

nexenta_dataset_dedup = off

string value

Deduplication value for new ZFS folders.

`nexenta_dataset_description = `

string value

Human-readable description for the folder.

`nexenta_host = `

string value

IP address of Nexenta SA

`nexenta_iscsi_service = `

string value

NexentaEdge iSCSI service name

nexenta_iscsi_target_portal_port = 3260

integer value

Nexenta target portal port

`nexenta_lun_container = `

string value

NexentaEdge logical path of bucket for LUNs

nexenta_mount_point_base = $state_path/mnt

string value

Base directory that contains NFS share mount points

nexenta_nbd_symlinks_dir = /dev/disk/by-path

string value

NexentaEdge logical path of directory to store symbolic links to NBDs

nexenta_nms_cache_volroot = True

boolean value

If set True cache NexentaStor appliance volroot option value.

nexenta_ns5_blocksize = 32

integer value

Block size for datasets

nexenta_password = nexenta

string value

Password to connect to Nexenta SA

`nexenta_rest_address = `

string value

IP address of NexentaEdge management REST API endpoint

nexenta_rest_password = nexenta

string value

Password to connect to NexentaEdge

nexenta_rest_port = 0

integer value

HTTP(S) port to connect to Nexenta REST API server. If it is equal zero, 8443 for HTTPS and 8080 for HTTP is used

nexenta_rest_protocol = auto

string value

Use http or https for REST connection (default auto)

nexenta_rest_user = admin

string value

User name to connect to NexentaEdge

nexenta_rrmgr_compression = 0

integer value

Enable stream compression, level 1..9. 1 - gives best speed; 9 - gives best compression.

nexenta_rrmgr_connections = 2

integer value

Number of TCP connections.

nexenta_rrmgr_tcp_buf_size = 4096

integer value

TCP Buffer size in KiloBytes.

nexenta_shares_config = /etc/cinder/nfs_shares

string value

File with the list of available nfs shares

nexenta_sparse = False

boolean value

Enables or disables the creation of sparse datasets

nexenta_sparsed_volumes = True

boolean value

Enables or disables the creation of volumes as sparsed files that take no space. If disabled (False), volume is created as a regular file, which takes a long time.

nexenta_target_group_prefix = cinder/

string value

Prefix for iSCSI target groups on SA

nexenta_target_prefix = iqn.1986-03.com.sun:02:cinder-

string value

IQN prefix for iSCSI targets

nexenta_use_https = True

boolean value

Use secure HTTP for REST connection (default True)

nexenta_user = admin

string value

User name to connect to Nexenta SA

nexenta_volume = cinder

string value

SA Pool that holds all volumes

nexenta_volume_group = iscsi

string value

Volume group for ns5

nfs_mount_attempts = 3

integer value

The number of attempts to mount NFS shares before raising an error. At least one attempt will be made to mount an NFS share, regardless of the value specified.

nfs_mount_options = None

string value

Mount options passed to the NFS client. See section of the NFS man page for details.

nfs_mount_point_base = $state_path/mnt

string value

Base dir containing mount points for NFS shares.

nfs_qcow2_volumes = False

boolean value

Create volumes as QCOW2 files rather than raw files.

nfs_shares_config = /etc/cinder/nfs_shares

string value

File with the list of available NFS shares.

nfs_snapshot_support = False

boolean value

Enable support for snapshots on the NFS driver. Platforms using libvirt <1.2.7 will encounter issues with this feature.

nfs_sparsed_volumes = True

boolean value

Create volumes as sparsed files which take no space. If set to False volume is created as regular file. In such case volume creation takes a lot of time.

nimble_pool_name = default

string value

Nimble Controller pool name

nimble_subnet_label = *

string value

Nimble Subnet Label

nimble_verify_cert_path = None

string value

Path to Nimble Array SSL certificate

nimble_verify_certificate = False

boolean value

Whether to verify Nimble SSL Certificate

num_iser_scan_tries = 3

integer value

The maximum number of times to rescan iSER targetto find volume

num_shell_tries = 3

integer value

Number of times to attempt to run flakey shell commands

num_volume_device_scan_tries = 3

integer value

The maximum number of times to rescan targets to find volume

pool_id_filter = []

list value

Pool id permit to use.

pool_type = default

string value

Pool type, like sata-2copy.

proxy = cinder.volume.drivers.ibm.ibm_storage.proxy.IBMStorageProxy

string value

Proxy driver that connects to the IBM Storage Array

pure_api_token = None

string value

REST API authorization token.

pure_automatic_max_oversubscription_ratio = True

boolean value

Automatically determine an oversubscription ratio based on the current total data reduction values. If used this calculated value will override the max_over_subscription_ratio config option.

pure_eradicate_on_delete = False

boolean value

When enabled, all Pure volumes, snapshots, and protection groups will be eradicated at the time of deletion in Cinder. Data will NOT be recoverable after a delete with this set to True! When disabled, volumes and snapshots will go into pending eradication state and can be recovered.

pure_replica_interval_default = 3600

integer value

Snapshot replication interval in seconds.

pure_replica_retention_long_term_default = 7

integer value

Retain snapshots per day on target for this time (in days.)

pure_replica_retention_long_term_per_day_default = 3

integer value

Retain how many snapshots for each day.

pure_replica_retention_short_term_default = 14400

integer value

Retain all snapshots on target for this time (in seconds.)

qnap_management_url = None

uri value

The URL to management QNAP Storage

qnap_poolname = None

string value

The pool name in the QNAP Storage

qnap_storage_protocol = iscsi

string value

Communication protocol to access QNAP storage

quobyte_client_cfg = None

string value

Path to a Quobyte Client configuration file.

quobyte_mount_point_base = $state_path/mnt

string value

Base dir containing the mount point for the Quobyte volume.

quobyte_qcow2_volumes = True

boolean value

Create volumes as QCOW2 files rather than raw files.

quobyte_sparsed_volumes = True

boolean value

Create volumes as sparse files which take no space. If set to False, volume is created as regular file.

quobyte_volume_url = None

string value

Quobyte URL to the Quobyte volume using e.g. a DNS SRV record (preferred) or a host list (alternatively) like quobyte://<DIR host1>, <DIR host2>/<volume name>

rados_connect_timeout = -1

integer value

Timeout value (in seconds) used when connecting to ceph cluster. If value < 0, no timeout is set and default librados value is used.

rados_connection_interval = 5

integer value

Interval value (in seconds) between connection retries to ceph cluster.

rados_connection_retries = 3

integer value

Number of retries if connection to ceph cluster failed.

`rbd_ceph_conf = `

string value

Path to the ceph configuration file

rbd_cluster_name = ceph

string value

The name of ceph cluster

rbd_exclusive_cinder_pool = True

boolean value

Set to True if the pool is used exclusively by Cinder. On exclusive use driver won’t query images' provisioned size as they will match the value calculated by the Cinder core code for allocated_capacity_gb. This reduces the load on the Ceph cluster as well as on the volume service.

rbd_flatten_volume_from_snapshot = False

boolean value

Flatten volumes created from snapshots to remove dependency from volume to snapshot

`rbd_keyring_conf = `

string value

Path to the ceph keyring file

rbd_max_clone_depth = 5

integer value

Maximum number of nested volume clones that are taken before a flatten occurs. Set to 0 to disable cloning.

rbd_pool = rbd

string value

The RADOS pool where rbd volumes are stored

rbd_secret_uuid = None

string value

The libvirt uuid of the secret for the rbd_user volumes

rbd_store_chunk_size = 4

integer value

Volumes will be chunked into objects of this size (in megabytes).

rbd_user = None

string value

The RADOS client name for accessing rbd volumes - only set when using cephx authentication

remove_empty_host = False

boolean value

To remove the host from Unity when the last LUN is detached from it. By default, it is False.

replication_connect_timeout = 5

integer value

Timeout value (in seconds) used when connecting to ceph cluster to do a demotion/promotion of volumes. If value < 0, no timeout is set and default librados value is used.

replication_device = None

dict value

Multi opt of dictionaries to represent a replication target device. This option may be specified multiple times in a single config section to specify multiple replication target devices. Each entry takes the standard dict config form: replication_device = target_device_id:<required>,key1:value1,key2:value2…​

report_discard_supported = False

boolean value

Report to clients of Cinder that the backend supports discard (aka. trim/unmap). This will not actually change the behavior of the backend or the client directly, it will only notify that it can be used.

report_dynamic_total_capacity = True

boolean value

Set to True for driver to report total capacity as a dynamic value -used + current free- and to False to report a static value -quota max bytes if defined and global size of cluster if not-.

reserved_percentage = 0

integer value

The percentage of backend capacity is reserved

retries = 200

integer value

Use this value to specify number of retries.

san_api_port = None

port value

Port to use to access the SAN API

`san_clustername = `

string value

Cluster name to use for creating volumes

`san_ip = `

string value

IP address of SAN controller

san_is_local = False

boolean value

Execute commands locally instead of over SSH; use if the volume service is running on the SAN device

san_login = admin

string value

Username for SAN controller

`san_password = `

string value

Password for SAN controller

`san_private_key = `

string value

Filename of private key to use for SSH authentication

san_rest_port = 8443

port value

REST server port number.

san_ssh_port = 22

port value

SSH port to use with SAN

san_thin_provision = True

boolean value

Use thin provisioning for SAN volumes?

scaleio_server_certificate_path = None

string value

Server certificate path

scaleio_verify_server_certificate = False

boolean value

verify server certificate

scst_target_driver = iscsi

string value

SCST target implementation can choose from multiple SCST target drivers.

scst_target_iqn_name = None

string value

Certain ISCSI targets have predefined target names, SCST target driver uses this name.

`secondary_san_ip = `

string value

IP address of secondary DSM controller

secondary_san_login = Admin

string value

Secondary DSM user name

`secondary_san_password = `

string value

Secondary DSM user password name

secondary_sc_api_port = 3033

port value

Secondary Dell API port

sf_account_prefix = None

string value

Create SolidFire accounts with this prefix. Any string can be used here, but the string "hostname" is special and will create a prefix using the cinder node hostname (previous default behavior). The default is NO prefix.

sf_allow_template_caching = False

boolean value

This option is deprecated and will be removed in the next OpenStack release. Please use the general cinder image-caching feature instead.

sf_allow_tenant_qos = False

boolean value

Allow tenants to specify QOS on create

sf_api_port = 443

port value

SolidFire API port. Useful if the device api is behind a proxy on a different port.

sf_emulate_512 = True

boolean value

Set 512 byte emulation on volume creation;

sf_enable_vag = False

boolean value

Utilize volume access groups on a per-tenant basis.

sf_svip = None

string value

Overrides default cluster SVIP with the one specified. This is required or deployments that have implemented the use of VLANs for iSCSI networks in their cloud.

sf_template_account_name = openstack-vtemplate

string value

Account name on the SolidFire Cluster to use as owner of template/cache volumes (created if does not exist).

sf_volume_prefix = UUID-

string value

Create SolidFire volumes with this prefix. Volume names are of the form <sf_volume_prefix><cinder-volume-id>. The default is to use a prefix of UUID-.

sheepdog_store_address = 127.0.0.1

string value

IP address of sheep daemon.

sheepdog_store_port = 7000

port value

Port of sheep daemon.

sio_allow_non_padded_volumes = False

boolean value

Allow volumes to be created in Storage Pools when zero padding is disabled. This option should not be enabled if multiple tenants will utilize volumes from a shared Storage Pool.

sio_max_over_subscription_ratio = 10.0

floating point value

max_over_subscription_ratio setting for the ScaleIO driver. This replaces the general max_over_subscription_ratio which has no effect in this driver.Maximum value allowed for ScaleIO is 10.0.

sio_protection_domain_id = None

string value

DEPRECATED: Protection Domain ID.

sio_protection_domain_name = None

string value

DEPRECATED: Protection Domain name.

sio_rest_server_port = 443

string value

REST server port.

sio_round_volume_capacity = True

boolean value

Round up volume capacity.

sio_server_api_version = None

string value

ScaleIO API version.

sio_server_certificate_path = None

string value

Server certificate path.

sio_storage_pool_id = None

string value

DEPRECATED: Storage Pool ID.

sio_storage_pool_name = None

string value

DEPRECATED: Storage Pool name.

sio_storage_pools = None

string value

Storage Pools.

sio_unmap_volume_before_deletion = False

boolean value

Unmap volume before deletion.

sio_verify_server_certificate = False

boolean value

Verify server certificate.

smbfs_default_volume_format = vhd

string value

Default format that will be used when creating volumes if no volume format is specified.

smbfs_mount_point_base = C:\OpenStack\_mnt

string value

Base dir containing mount points for smbfs shares.

smbfs_pool_mappings = {}

dict value

Mappings between share locations and pool names. If not specified, the share names will be used as pool names. Example: //addr/share:pool_name,//addr/share2:pool_name2

smbfs_shares_config = C:\OpenStack\smbfs_shares.txt

string value

File with the list of available smbfs shares.

ssh_conn_timeout = 30

integer value

SSH connection timeout in seconds

ssh_max_pool_conn = 5

integer value

Maximum ssh connections in the pool

ssh_min_pool_conn = 1

integer value

Minimum ssh connections in the pool

storage_protocol = iscsi

string value

Protocol for transferring data between host and storage back-end.

storage_vnx_authentication_type = global

string value

VNX authentication scope type. By default, the value is global.

storage_vnx_pool_names = None

list value

Comma-separated list of storage pool names to be used.

storage_vnx_security_file_dir = None

string value

Directory path that contains the VNX security file. Make sure the security file is generated first.

storwize_peer_pool = None

string value

Specifies the name of the peer pool for hyperswap volume, the peer pool must exist on the other site.

storwize_preferred_host_site = {}

dict value

Specifies the site information for host. One WWPN or multi WWPNs used in the host can be specified. For example: storwize_preferred_host_site=site1:wwpn1,site2:wwpn2&wwpn3 or storwize_preferred_host_site=site1:iqn1,site2:iqn2

storwize_san_secondary_ip = None

string value

Specifies secondary management IP or hostname to be used if san_ip is invalid or becomes inaccessible.

storwize_svc_allow_tenant_qos = False

boolean value

Allow tenants to specify QOS on create

storwize_svc_flashcopy_rate = 50

integer value

Specifies the Storwize FlashCopy copy rate to be used when creating a full volume copy. The default is rate is 50, and the valid rates are 1-100.

storwize_svc_flashcopy_timeout = 120

integer value

Maximum number of seconds to wait for FlashCopy to be prepared.

storwize_svc_iscsi_chap_enabled = True

boolean value

Configure CHAP authentication for iSCSI connections (Default: Enabled)

storwize_svc_mirror_pool = None

string value

Specifies the name of the pool in which mirrored copy is stored. Example: "pool2"

storwize_svc_multihostmap_enabled = True

boolean value

This option no longer has any affect. It is deprecated and will be removed in the next release.

storwize_svc_multipath_enabled = False

boolean value

Connect with multipath (FC only; iSCSI multipath is controlled by Nova)

storwize_svc_stretched_cluster_partner = None

string value

If operating in stretched cluster mode, specify the name of the pool in which mirrored copies are stored.Example: "pool2"

storwize_svc_vol_autoexpand = True

boolean value

Storage system autoexpand parameter for volumes (True/False)

storwize_svc_vol_compression = False

boolean value

Storage system compression option for volumes

storwize_svc_vol_easytier = True

boolean value

Enable Easy Tier for volumes

storwize_svc_vol_grainsize = 256

integer value

Storage system grain size parameter for volumes (32/64/128/256)

storwize_svc_vol_iogrp = 0

string value

The I/O group in which to allocate volumes. It can be a comma-separated list in which case the driver will select an io_group based on least number of volumes associated with the io_group.

storwize_svc_vol_nofmtdisk = False

boolean value

Specifies that the volume not be formatted during creation.

storwize_svc_vol_rsize = 2

integer value

Storage system space-efficiency parameter for volumes (percentage)

storwize_svc_vol_warning = 0

integer value

Storage system threshold for volume capacity warnings (percentage)

storwize_svc_volpool_name = [u'volpool']

list value

Comma separated list of storage system storage pools for volumes.

suppress_requests_ssl_warnings = False

boolean value

Suppress requests library SSL certificate warnings.

synology_admin_port = 5000

port value

Management port for Synology storage.

synology_device_id = None

string value

Device id for skip one time password check for logging in Synology storage if OTP is enabled.

synology_one_time_pass = None

string value

One time password of administrator for logging in Synology storage if OTP is enabled.

`synology_password = `

string value

Password of administrator for logging in Synology storage.

`synology_pool_name = `

string value

Volume on Synology storage to be used for creating lun.

synology_ssl_verify = True

boolean value

Do certificate validation or not if $driver_use_ssl is True

synology_username = admin

string value

Administrator of Synology storage.

target_helper = tgtadm

string value

iSCSI target user-land tool to use. tgtadm is default, use lioadm for LIO iSCSI support, scstadmin for SCST target support, ietadm for iSCSI Enterprise Target, iscsictl for Chelsio iSCSI Target or fake for testing.

target_ip_address = $my_ip

string value

The IP address that the iSCSI daemon is listening on

target_port = 3260

port value

The port that the iSCSI daemon is listening on

target_prefix = iqn.2010-10.org.openstack:

string value

Prefix for iSCSI volumes

target_protocol = iscsi

string value

Determines the iSCSI protocol for new iSCSI volumes, created with tgtadm or lioadm target helpers. In order to enable RDMA, this parameter should be set with the value "iser". The supported iSCSI protocol values are "iscsi" and "iser".

thres_avl_size_perc_start = 20

integer value

If the percentage of available space for an NFS share has dropped below the value specified by this option, the NFS image cache will be cleaned.

thres_avl_size_perc_stop = 60

integer value

When the percentage of available space on an NFS share has reached the percentage specified by this option, the driver will stop clearing files from the NFS image cache that have not been accessed in the last M minutes, where M is the value of the expiry_thres_minutes configuration option.

tintri_api_version = v310

string value

API version for the storage system

tintri_image_cache_expiry_days = 30

integer value

Delete unused image snapshots older than mentioned days

tintri_image_shares_config = None

string value

Path to image nfs shares file

tintri_server_hostname = None

string value

The hostname (or IP address) for the storage system

tintri_server_password = None

string value

Password for the storage system

tintri_server_username = None

string value

User name for the storage system

trace_flags = None

list value

List of options that control which trace info is written to the DEBUG log level to assist developers. Valid values are method and api.

unique_fqdn_network = True

boolean value

Whether or not our private network has unique FQDN on each initiator or not. For example networks with QA systems usually have multiple servers/VMs with the same FQDN. When true this will create host entries on K2 using the FQDN, when false it will use the reversed IQN/WWNN.

unity_io_ports = []

list value

A comma-separated list of iSCSI or FC ports to be used. Each port can be Unix-style glob expressions.

unity_storage_pool_names = []

list value

A comma-separated list of storage pool names to be used.

use_chap_auth = False

boolean value

Option to enable/disable CHAP authentication for targets.

use_multipath_for_image_xfer = False

boolean value

Do we attach/detach volumes in cinder using multipath for volume to image and image to volume transfers?

vmax_array = None

string value

Serial number of the array to connect to.

vmax_port_groups = None

list value

List of port groups containing frontend ports configured prior for server connection.

vmax_service_level = None

string value

Service level to use for provisioning storage.

vmax_srp = None

string value

Storage resource pool on array to use for provisioning.

vmax_workload = None

string value

Workload

vmware_adapter_type = lsiLogic

string value

Default adapter type to be used for attaching volumes.

vmware_api_retry_count = 10

integer value

Number of times VMware vCenter server API must be retried upon connection related issues.

vmware_ca_file = None

string value

CA bundle file to use in verifying the vCenter server certificate.

vmware_cluster_name = None

multi valued

Name of a vCenter compute cluster where volumes should be created.

vmware_connection_pool_size = 10

integer value

Maximum number of connections in http connection pool.

vmware_host_ip = None

string value

IP address for connecting to VMware vCenter server.

vmware_host_password = None

string value

Password for authenticating with VMware vCenter server.

vmware_host_port = 443

port value

Port number for connecting to VMware vCenter server.

vmware_host_username = None

string value

Username for authenticating with VMware vCenter server.

vmware_host_version = None

string value

Optional string specifying the VMware vCenter server version. The driver attempts to retrieve the version from VMware vCenter server. Set this configuration only if you want to override the vCenter server version.

vmware_image_transfer_timeout_secs = 7200

integer value

Timeout in seconds for VMDK volume transfer between Cinder and Glance.

vmware_insecure = False

boolean value

If true, the vCenter server certificate is not verified. If false, then the default CA truststore is used for verification. This option is ignored if "vmware_ca_file" is set.

vmware_lazy_create = True

boolean value

If true, the backend volume in vCenter server is created lazily when the volume is created without any source. The backend volume is created when the volume is attached, uploaded to image service or during backup.

vmware_max_objects_retrieval = 100

integer value

Max number of objects to be retrieved per batch. Query results will be obtained in batches from the server and not in one shot. Server may still limit the count to something less than the configured value.

vmware_snapshot_format = template

string value

Volume snapshot format in vCenter server.

vmware_task_poll_interval = 2.0

floating point value

The interval (in seconds) for polling remote tasks invoked on VMware vCenter server.

vmware_tmp_dir = /tmp

string value

Directory where virtual disks are stored during volume backup and restore.

vmware_volume_folder = Volumes

string value

Name of the vCenter inventory folder that will contain Cinder volumes. This folder will be created under "OpenStack/<project_folder>", where project_folder is of format "Project (<volume_project_id>)".

vmware_wsdl_location = None

string value

Optional VIM service WSDL Location e.g http://<server>/vimService.wsdl. Optional over-ride to default location for bug work-arounds.

volume_backend_name = None

string value

The backend name for a given driver implementation

volume_clear = zero

string value

Method used to wipe old volumes

volume_clear_ionice = None

string value

The flag to pass to ionice to alter the i/o priority of the process used to zero a volume after deletion, for example "-c3" for idle only priority.

volume_clear_size = 0

integer value

Size in MiB to wipe at start of old volumes. 1024 MiBat max. 0 ⇒ all

volume_copy_blkio_cgroup_name = cinder-volume-copy

string value

The blkio cgroup name to be used to limit bandwidth of volume copy

volume_copy_bps_limit = 0

integer value

The upper limit of bandwidth of volume copy. 0 ⇒ unlimited

volume_dd_blocksize = 1M

string value

The default block size used when copying/clearing volumes

volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver

string value

Driver to use for volume creation

volume_group = cinder-volumes

string value

Name for the VG that will contain exported volumes

volumes_dir = $state_path/volumes

string value

Volume configuration file storage directory

vzstorage_default_volume_format = raw

string value

Default format that will be used when creating volumes if no volume format is specified.

vzstorage_mount_options = None

list value

Mount options passed to the vzstorage client. See section of the pstorage-mount man page for details.

vzstorage_mount_point_base = $state_path/mnt

string value

Base dir containing mount points for vzstorage shares.

vzstorage_shares_config = /etc/cinder/vzstorage_shares

string value

File with the list of available vzstorage shares.

vzstorage_sparsed_volumes = True

boolean value

Create volumes as sparsed files which take no space rather than regular files when using raw format, in which case volume creation takes lot of time.

vzstorage_used_ratio = 0.95

floating point value

Percent of ACTUAL usage of the underlying volume before no new volumes can be allocated to the volume destination.

windows_iscsi_lun_path = C:\iSCSIVirtualDisks

string value

Path to store VHD backed volumes

xtremio_array_busy_retry_count = 5

integer value

Number of retries in case array is busy

xtremio_array_busy_retry_interval = 5

integer value

Interval between retries in case array is busy

xtremio_clean_unused_ig = False

boolean value

Should the driver remove initiator groups with no volumes after the last connection was terminated. Since the behavior till now was to leave the IG be, we default to False (not deleting IGs without connected volumes); setting this parameter to True will remove any IG after terminating its connection to the last volume.

`xtremio_cluster_name = `

string value

XMS cluster id in multi-cluster environment

xtremio_volumes_per_glance_cache = 100

integer value

Number of volumes created from each cached glance image

zadara_default_snap_policy = False

boolean value

VPSA - Attach snapshot policy for volumes

zadara_password = None

string value

VPSA - Password

zadara_ssl_cert_verify = True

boolean value

If set to True the http client will validate the SSL certificate of the VPSA endpoint.

zadara_use_iser = True

boolean value

VPSA - Use ISER instead of iSCSI

zadara_user = None

string value

VPSA - Username

zadara_vol_encrypt = False

boolean value

VPSA - Default encryption policy for volumes

zadara_vol_name_template = OS_%s

string value

VPSA - Default template for VPSA volume names

zadara_vpsa_host = None

string value

VPSA - Management Host name or IP address

zadara_vpsa_poolname = None

string value

VPSA - Storage Pool assigned for volumes

zadara_vpsa_port = None

port value

VPSA - Port number

zadara_vpsa_use_ssl = False

boolean value

VPSA - Use SSL connection

zfssa_cache_directory = os-cinder-cache

string value

Name of directory inside zfssa_nfs_share where cache volumes are stored.

zfssa_cache_project = os-cinder-cache

string value

Name of ZFSSA project where cache volumes are stored.

zfssa_data_ip = None

string value

Data path IP address

zfssa_enable_local_cache = True

boolean value

Flag to enable local caching: True, False.

zfssa_https_port = 443

string value

HTTPS port number

`zfssa_initiator = `

string value

iSCSI initiator IQNs. (comma separated)

`zfssa_initiator_config = `

string value

iSCSI initiators configuration.

`zfssa_initiator_group = `

string value

iSCSI initiator group.

`zfssa_initiator_password = `

string value

Secret of the iSCSI initiator CHAP user.

`zfssa_initiator_user = `

string value

iSCSI initiator CHAP user (name).

zfssa_lun_compression = off

string value

Data compression.

zfssa_lun_logbias = latency

string value

Synchronous write bias.

zfssa_lun_sparse = False

boolean value

Flag to enable sparse (thin-provisioned): True, False.

zfssa_lun_volblocksize = 8k

string value

Block size.

zfssa_manage_policy = loose

string value

Driver policy for volume manage.

`zfssa_nfs_mount_options = `

string value

Options to be passed while mounting share over nfs

`zfssa_nfs_pool = `

string value

Storage pool name.

zfssa_nfs_project = NFSProject

string value

Project name.

zfssa_nfs_share = nfs_share

string value

Share name.

zfssa_nfs_share_compression = off

string value

Data compression.

zfssa_nfs_share_logbias = latency

string value

Synchronous write bias-latency, throughput.

zfssa_pool = None

string value

Storage pool name.

zfssa_project = None

string value

Project name.

`zfssa_replication_ip = `

string value

IP address used for replication data. (maybe the same as data ip)

zfssa_rest_timeout = None

integer value

REST connection timeout. (seconds)

zfssa_target_group = tgt-grp

string value

iSCSI target group name.

zfssa_target_interfaces = None

string value

Network interfaces of iSCSI targets. (comma separated)

`zfssa_target_password = `

string value

Secret of the iSCSI target CHAP user.

zfssa_target_portal = None

string value

iSCSI target portal (Data-IP:Port, w.x.y.z:3260).

`zfssa_target_user = `

string value

iSCSI target CHAP user (name).

3.1.4. barbican

The following table outlines the options available under the [barbican] group in the /etc/cinder/cinder.conf file.

Table 3.4. barbican

Configuration option = Default valueTypeDescription

auth_endpoint = http://localhost/identity/v3

string value

Use this endpoint to connect to Keystone

barbican_api_version = None

string value

Version of the Barbican API, for example: "v1"

barbican_endpoint = None

string value

Use this endpoint to connect to Barbican, for example: "http://localhost:9311/"

number_of_retries = 60

integer value

Number of times to retry poll for key creation completion

retry_delay = 1

integer value

Number of seconds to wait before retrying poll for key creation completion

verify_ssl = True

boolean value

Specifies if insecure TLS (https) requests. If False, the server’s certificate will not be validated

3.1.5. brcd_fabric_example

The following table outlines the options available under the [brcd_fabric_example] group in the /etc/cinder/cinder.conf file.

Table 3.5. brcd_fabric_example

Configuration option = Default valueTypeDescription

`fc_fabric_address = `

string value

Management IP of fabric.

`fc_fabric_password = `

string value

Password for user.

fc_fabric_port = 22

port value

Connecting port

`fc_fabric_ssh_cert_path = `

string value

Local SSH certificate Path.

`fc_fabric_user = `

string value

Fabric user ID.

fc_southbound_protocol = HTTP

string value

South bound connector for the fabric.

fc_virtual_fabric_id = None

string value

Virtual Fabric ID.

zone_activate = True

boolean value

Overridden zoning activation state.

zone_name_prefix = openstack

string value

Overridden zone name prefix.

zoning_policy = initiator-target

string value

Overridden zoning policy.

3.1.6. cisco_fabric_example

The following table outlines the options available under the [cisco_fabric_example] group in the /etc/cinder/cinder.conf file.

Table 3.6. cisco_fabric_example

Configuration option = Default valueTypeDescription

`cisco_fc_fabric_address = `

string value

Management IP of fabric

`cisco_fc_fabric_password = `

string value

Password for user

cisco_fc_fabric_port = 22

port value

Connecting port

`cisco_fc_fabric_user = `

string value

Fabric user ID

cisco_zone_activate = True

boolean value

overridden zoning activation state

cisco_zone_name_prefix = None

string value

overridden zone name prefix

cisco_zoning_policy = initiator-target

string value

overridden zoning policy

cisco_zoning_vsan = None

string value

VSAN of the Fabric

3.1.7. coordination

The following table outlines the options available under the [coordination] group in the /etc/cinder/cinder.conf file.

Table 3.7. coordination

Configuration option = Default valueTypeDescription

backend_url = file://$state_path

string value

The backend URL to use for distributed coordination.

3.1.8. cors

The following table outlines the options available under the [cors] group in the /etc/cinder/cinder.conf file.

Table 3.8. cors

Configuration option = Default valueTypeDescription

allow_credentials = True

boolean value

Indicate that the actual request can include user credentials

allow_headers = [u'X-Auth-Token', u'X-Identity-Status', u'X-Roles', u'X-Service-Catalog', u'X-User-Id', u'X-Tenant-Id', u'X-OpenStack-Request-ID', u'X-Trace-Info', u'X-Trace-HMAC', u'OpenStack-API-Version']

list value

Indicate which header field names may be used during the actual request.

allow_methods = [u'GET', u'PUT', u'POST', u'DELETE', u'PATCH', u'HEAD']

list value

Indicate which methods can be used during the actual request.

allowed_origin = None

list value

Indicate whether this resource may be shared with the domain received in the requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing slash. Example: https://horizon.example.com

expose_headers = [u'X-Auth-Token', u'X-Subject-Token', u'X-Service-Token', u'X-OpenStack-Request-ID', u'OpenStack-API-Version']

list value

Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers.

max_age = 3600

integer value

Maximum cache age of CORS preflight requests.

3.1.9. database

The following table outlines the options available under the [database] group in the /etc/cinder/cinder.conf file.

Table 3.9. database

Configuration option = Default valueTypeDescription

backend = sqlalchemy

string value

The back end to use for the database.

connection = None

string value

The SQLAlchemy connection string to use to connect to the database.

connection_debug = 0

integer value

Verbosity of SQL debugging information: 0=None, 100=Everything.

connection_recycle_time = 3600

integer value

Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.

connection_trace = False

boolean value

Add Python stack traces to SQL as comment strings.

db_inc_retry_interval = True

boolean value

If True, increases the interval between retries of a database operation up to db_max_retry_interval.

db_max_retries = 20

integer value

Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.

db_max_retry_interval = 10

integer value

If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.

db_retry_interval = 1

integer value

Seconds between retries of a database transaction.

max_overflow = 50

integer value

If set, use this value for max_overflow with SQLAlchemy.

max_pool_size = 5

integer value

Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.

max_retries = 10

integer value

Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.

min_pool_size = 1

integer value

Minimum number of SQL connections to keep open in a pool.

mysql_enable_ndb = False

boolean value

If True, transparently enables support for handling MySQL Cluster (NDB).

mysql_sql_mode = TRADITIONAL

string value

The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=

pool_timeout = None

integer value

If set, use this value for pool_timeout with SQLAlchemy.

retry_interval = 10

integer value

Interval between retries of opening a SQL connection.

slave_connection = None

string value

The SQLAlchemy connection string to use to connect to the slave database.

sqlite_synchronous = True

boolean value

If True, SQLite uses synchronous mode.

use_db_reconnect = False

boolean value

Enable the experimental use of database reconnect on connection lost.

3.1.10. fc-zone-manager

The following table outlines the options available under the [fc-zone-manager] group in the /etc/cinder/cinder.conf file.

Table 3.10. fc-zone-manager

Configuration option = Default valueTypeDescription

brcd_sb_connector = HTTP

string value

South bound connector for zoning operation

cisco_sb_connector = cinder.zonemanager.drivers.cisco.cisco_fc_zone_client_cli.CiscoFCZoneClientCLI

string value

Southbound connector for zoning operation

enable_unsupported_driver = False

boolean value

Set this to True when you want to allow an unsupported zone manager driver to start. Drivers that haven’t maintained a working CI system and testing are marked as unsupported until CI is working again. This also marks a driver as deprecated and may be removed in the next release.

fc_fabric_names = None

string value

Comma separated list of Fibre Channel fabric names. This list of names is used to retrieve other SAN credentials for connecting to each SAN fabric

fc_san_lookup_service = cinder.zonemanager.drivers.brocade.brcd_fc_san_lookup_service.BrcdFCSanLookupService

string value

FC SAN Lookup Service

zone_driver = cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver.BrcdFCZoneDriver

string value

FC Zone Driver responsible for zone management

zoning_policy = initiator-target

string value

Zoning policy configured by user; valid values include "initiator-target" or "initiator"

3.1.11. healthcheck

The following table outlines the options available under the [healthcheck] group in the /etc/cinder/cinder.conf file.

Table 3.11. healthcheck

Configuration option = Default valueTypeDescription

backends = []

list value

Additional backends that can perform health checks and report that information back as part of a request.

detailed = False

boolean value

Show more detailed information as part of the response

disable_by_file_path = None

string value

Check the presence of a file to determine if an application is running on a port. Used by DisableByFileHealthcheck plugin.

disable_by_file_paths = []

list value

Check the presence of a file based on a port to determine if an application is running on a port. Expects a "port:path" list of strings. Used by DisableByFilesPortsHealthcheck plugin.

path = /healthcheck

string value

The path to respond to healtcheck requests on.

3.1.12. key_manager

The following table outlines the options available under the [key_manager] group in the /etc/cinder/cinder.conf file.

Table 3.12. key_manager

Configuration option = Default valueTypeDescription

auth_type = None

string value

The type of authentication credential to create. Possible values are token, password, keystone_token, and keystone_password. Required if no context is passed to the credential factory.

auth_url = None

string value

Use this endpoint to connect to Keystone.

backend = barbican

string value

Specify the key manager implementation. Options are "barbican" and "vault". Default is "barbican". Will support the values earlier set using [key_manager]/api_class for some time.

domain_id = None

string value

Domain ID for domain scoping. Optional for keystone_token and keystone_password auth_type.

domain_name = None

string value

Domain name for domain scoping. Optional for keystone_token and keystone_password auth_type.

fixed_key = None

string value

Fixed key returned by key manager, specified in hex

password = None

string value

Password for authentication. Required for password and keystone_password auth_type.

project_domain_id = None

string value

Project’s domain ID for project. Optional for keystone_token and keystone_password auth_type.

project_domain_name = None

string value

Project’s domain name for project. Optional for keystone_token and keystone_password auth_type.

project_id = None

string value

Project ID for project scoping. Optional for keystone_token and keystone_password auth_type.

project_name = None

string value

Project name for project scoping. Optional for keystone_token and keystone_password auth_type.

reauthenticate = True

boolean value

Allow fetching a new token if the current one is going to expire. Optional for keystone_token and keystone_password auth_type.

token = None

string value

Token for authentication. Required for token and keystone_token auth_type if no context is passed to the credential factory.

trust_id = None

string value

Trust ID for trust scoping. Optional for keystone_token and keystone_password auth_type.

user_domain_id = None

string value

User’s domain ID for authentication. Optional for keystone_token and keystone_password auth_type.

user_domain_name = None

string value

User’s domain name for authentication. Optional for keystone_token and keystone_password auth_type.

user_id = None

string value

User ID for authentication. Optional for keystone_token and keystone_password auth_type.

username = None

string value

Username for authentication. Required for password auth_type. Optional for the keystone_password auth_type.

3.1.13. keystone_authtoken

The following table outlines the options available under the [keystone_authtoken] group in the /etc/cinder/cinder.conf file.

Table 3.13. keystone_authtoken

Configuration option = Default valueTypeDescription

auth_section = None

string value

Config Section from which to load plugin specific options

auth_type = None

string value

Authentication type to load

auth_uri = None

string value

Complete "public" Identity API endpoint. This endpoint should not be an "admin" endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint. This option is deprecated in favor of www_authenticate_uri and will be removed in the S release.

auth_version = None

string value

API version of the admin Identity API endpoint.

cache = None

string value

Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the memcached_servers option instead.

cafile = None

string value

A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs.

certfile = None

string value

Required if identity server requires client certificate

check_revocations_for_cached = False

boolean value

If true, the revocation list will be checked for cached tokens. This requires that PKI tokens are configured on the identity server.

delay_auth_decision = False

boolean value

Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.

enforce_token_bind = permissive

string value

Used to control the use and type of token binding. Can be set to: "disabled" to not check token binding. "permissive" (default) to validate binding information if the bind type is of a form known to the server and ignore it if not. "strict" like "permissive" but if the bind type is unknown the token will be rejected. "required" any form of token binding is needed to be allowed. Finally the name of a binding method that must be present in tokens.

hash_algorithms = [u'md5']

list value

Hash algorithms to use for hashing PKI tokens. This may be a single algorithm or multiple. The algorithms are those supported by Python standard hashlib.new(). The hashes will be tried in the order given, so put the preferred one first for performance. The result of the first hash will be stored in the cache. This will typically be set to multiple values only while migrating from a less secure algorithm to a more secure one. Once all the old tokens are expired this option should be set to a single value for better performance.

http_connect_timeout = None

integer value

Request timeout value for communicating with Identity API server.

http_request_max_retries = 3

integer value

How many times are we trying to reconnect when communicating with Identity API Server.

include_service_catalog = True

boolean value

(Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation and will not set the X-Service-Catalog header.

insecure = False

boolean value

Verify HTTPS connections.

keyfile = None

string value

Required if identity server requires client certificate

memcache_pool_conn_get_timeout = 10

integer value

(Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool.

memcache_pool_dead_retry = 300

integer value

(Optional) Number of seconds memcached server is considered dead before it is tried again.

memcache_pool_maxsize = 10

integer value

(Optional) Maximum total number of open connections to every memcached server.

memcache_pool_socket_timeout = 3

integer value

(Optional) Socket timeout in seconds for communicating with a memcached server.

memcache_pool_unused_timeout = 60

integer value

(Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed.

memcache_secret_key = None

string value

(Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation.

memcache_security_strategy = None

string value

(Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.

memcache_use_advanced_pool = False

boolean value

(Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x.

memcached_servers = None

list value

Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process.

region_name = None

string value

The region in which the identity server can be found.

revocation_cache_time = 10

integer value

Determines the frequency at which the list of revoked tokens is retrieved from the Identity service (in seconds). A high number of revocation events combined with a low cache duration may significantly reduce performance. Only valid for PKI tokens. This option has been deprecated in the Ocata release and will be removed in the P release.

service_token_roles = [u'service']

list value

A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check.

service_token_roles_required = False

boolean value

For backwards compatibility reasons we must let valid service tokens pass that don’t pass the service_token_roles check as valid. Setting this true will become the default in a future release and should be enabled if possible.

signing_dir = None

string value

Directory used to cache files related to PKI tokens. This option has been deprecated in the Ocata release and will be removed in the P release.

token_cache_time = 300

integer value

In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in seconds). Set to -1 to disable caching completely.

www_authenticate_uri = None

string value

Complete "public" Identity API endpoint. This endpoint should not be an "admin" endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint.

3.1.14. matchmaker_redis

The following table outlines the options available under the [matchmaker_redis] group in the /etc/cinder/cinder.conf file.

Table 3.14. matchmaker_redis

Configuration option = Default valueTypeDescription

check_timeout = 20000

integer value

Time in ms to wait before the transaction is killed.

host = 127.0.0.1

string value

Host to locate redis.

`password = `

string value

Password for Redis server (optional).

port = 6379

port value

Use this port to connect to redis host.

sentinel_group_name = oslo-messaging-zeromq

string value

Redis replica set name.

sentinel_hosts = []

list value

List of Redis Sentinel hosts (fault tolerance mode), e.g., [host:port, host1:port …​ ]

socket_timeout = 10000

integer value

Timeout in ms on blocking socket operations.

wait_timeout = 2000

integer value

Time in ms to wait between connection attempts.

3.1.15. nova

The following table outlines the options available under the [nova] group in the /etc/cinder/cinder.conf file.

Table 3.15. nova

Configuration option = Default valueTypeDescription

auth_section = None

string value

Config Section from which to load plugin specific options

auth_type = None

string value

Authentication type to load

cafile = None

string value

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile = None

string value

PEM encoded client certificate cert file

insecure = False

boolean value

Verify HTTPS connections.

interface = public

string value

Type of the nova endpoint to use. This endpoint will be looked up in the keystone catalog and should be one of public, internal or admin.

keyfile = None

string value

PEM encoded client certificate key file

region_name = None

string value

Name of nova region to use. Useful if keystone manages more than one region.

timeout = None

integer value

Timeout value for http requests

token_auth_url = None

string value

The authentication URL for the nova connection when using the current users token

3.1.16. oslo_concurrency

The following table outlines the options available under the [oslo_concurrency] group in the /etc/cinder/cinder.conf file.

Table 3.16. oslo_concurrency

Configuration option = Default valueTypeDescription

disable_process_locking = False

boolean value

Enables or disables inter-process locks.

lock_path = None

string value

Directory to use for lock files. For security, the specified directory should only be writable by the user running the processes that need locking. Defaults to environment variable OSLO_LOCK_PATH. If external locks are used, a lock path must be set.

3.1.17. oslo_messaging_amqp

The following table outlines the options available under the [oslo_messaging_amqp] group in the /etc/cinder/cinder.conf file.

Table 3.17. oslo_messaging_amqp

Configuration option = Default valueTypeDescription

addressing_mode = dynamic

string value

Indicates the addressing mode used by the driver. Permitted values: legacy - use legacy non-routable addressing routable - use routable addresses dynamic - use legacy addresses if the message bus does not support routing otherwise use routable addressing

allow_insecure_clients = False

boolean value

Accept clients using either SSL or plain TCP

anycast_address = anycast

string value

Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.

broadcast_prefix = broadcast

string value

address prefix used when broadcasting to all servers

connection_retry_backoff = 2

integer value

Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.

connection_retry_interval = 1

integer value

Seconds to pause before attempting to re-connect.

connection_retry_interval_max = 30

integer value

Maximum limit for connection_retry_interval + connection_retry_backoff

container_name = None

string value

Name for the AMQP container. must be globally unique. Defaults to a generated UUID

default_notification_exchange = None

string value

Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else notify

default_notify_timeout = 30

integer value

The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.

default_reply_retry = 0

integer value

The maximum number of attempts to re-send a reply message which failed due to a recoverable error.

default_reply_timeout = 30

integer value

The deadline for an rpc reply message delivery.

default_rpc_exchange = None

string value

Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else rpc

default_send_timeout = 30

integer value

The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.

default_sender_link_timeout = 600

integer value

The duration to schedule a purge of idle sender links. Detach link after expiry.

group_request_prefix = unicast

string value

address prefix when sending to any server in group

idle_timeout = 0

integer value

Timeout for inactive connections (in seconds)

link_retry_delay = 10

integer value

Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.

multicast_address = multicast

string value

Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.

notify_address_prefix = openstack.org/om/notify

string value

Address prefix for all generated Notification addresses

notify_server_credit = 100

integer value

Window size for incoming Notification messages

`password = `

string value

Password for message broker authentication

pre_settled = [u'rpc-cast', u'rpc-reply']

multi valued

Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: rpc-call - send RPC Calls pre-settled rpc-reply- send RPC Replies pre-settled rpc-cast - Send RPC Casts pre-settled notify - Send Notifications pre-settled

pseudo_vhost = True

boolean value

Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private subnet per virtual host. Set to False if the message bus supports virtual hosting using the hostname field in the AMQP 1.0 Open performative as the name of the virtual host.

reply_link_credit = 200

integer value

Window size for incoming RPC Reply messages.

rpc_address_prefix = openstack.org/om/rpc

string value

Address prefix for all generated RPC addresses

rpc_server_credit = 100

integer value

Window size for incoming RPC Request messages

`sasl_config_dir = `

string value

Path to directory that contains the SASL configuration

`sasl_config_name = `

string value

Name of configuration file (without .conf suffix)

`sasl_default_realm = `

string value

SASL realm to use if no realm present in username

`sasl_mechanisms = `

string value

Space separated list of acceptable SASL mechanisms

server_request_prefix = exclusive

string value

address prefix used when sending to a specific server

ssl = False

boolean value

Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.

`ssl_ca_file = `

string value

CA certificate PEM file used to verify the server’s certificate

`ssl_cert_file = `

string value

Self-identifying certificate PEM file for client authentication

`ssl_key_file = `

string value

Private key PEM file used to sign ssl_cert_file certificate (optional)

ssl_key_password = None

string value

Password for decrypting ssl_key_file (if encrypted)

ssl_verify_vhost = False

boolean value

By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.

trace = False

boolean value

Debug: dump AMQP frames to stdout

unicast_address = unicast

string value

Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.

`username = `

string value

User name for message broker authentication

3.1.18. oslo_messaging_kafka

The following table outlines the options available under the [oslo_messaging_kafka] group in the /etc/cinder/cinder.conf file.

Table 3.18. oslo_messaging_kafka

Configuration option = Default valueTypeDescription

conn_pool_min_size = 2

integer value

The pool size limit for connections expiration policy

conn_pool_ttl = 1200

integer value

The time-to-live in sec of idle connections in the pool

consumer_group = oslo_messaging_consumer

string value

Group id for Kafka consumer. Consumers in one group will coordinate message consumption

kafka_consumer_timeout = 1.0

floating point value

Default timeout(s) for Kafka consumers

kafka_default_host = localhost

string value

Default Kafka broker Host

kafka_default_port = 9092

port value

Default Kafka broker Port

kafka_max_fetch_bytes = 1048576

integer value

Max fetch bytes of Kafka consumer

pool_size = 10

integer value

Pool Size for Kafka Consumers

producer_batch_size = 16384

integer value

Size of batch for the producer async send

producer_batch_timeout = 0.0

floating point value

Upper bound on the delay for KafkaProducer batching in seconds

3.1.19. oslo_messaging_notifications

The following table outlines the options available under the [oslo_messaging_notifications] group in the /etc/cinder/cinder.conf file.

Table 3.19. oslo_messaging_notifications

Configuration option = Default valueTypeDescription

driver = []

multi valued

The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop

retry = -1

integer value

The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite

topics = [u'notifications']

list value

AMQP topic used for OpenStack notifications.

transport_url = None

string value

A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.

3.1.20. oslo_messaging_rabbit

The following table outlines the options available under the [oslo_messaging_rabbit] group in the /etc/cinder/cinder.conf file.

Table 3.20. oslo_messaging_rabbit

Configuration option = Default valueTypeDescription

amqp_auto_delete = False

boolean value

Auto-delete queues in AMQP.

amqp_durable_queues = False

boolean value

Use durable queues in AMQP.

channel_max = None

integer value

Maximum number of channels to allow

connection_factory = single

string value

Connection factory implementation

default_notification_exchange = ${control_exchange}_notification

string value

Exchange name for sending notifications

default_notification_retry_attempts = -1

integer value

Reconnecting retry count in case of connectivity problem during sending notification, -1 means infinite retry.

default_rpc_exchange = ${control_exchange}_rpc

string value

Exchange name for sending RPC messages

default_rpc_retry_attempts = -1

integer value

Reconnecting retry count in case of connectivity problem during sending RPC message, -1 means infinite retry. If actual retry attempts in not 0 the rpc request could be processed more than one time

default_serializer_type = json

string value

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

fake_rabbit = False

boolean value

Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake

frame_max = None

integer value

The maximum byte size for an AMQP frame

heartbeat_interval = 3

integer value

How often to send heartbeats for consumer’s connections

heartbeat_rate = 2

integer value

How often times during the heartbeat_timeout_threshold we check the heartbeat.

heartbeat_timeout_threshold = 60

integer value

Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disable the heartbeat). EXPERIMENTAL

host_connection_reconnect_delay = 0.25

floating point value

Set delay for reconnection to some host which has connection error

kombu_compression = None

string value

EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.

kombu_failover_strategy = round-robin

string value

Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.

kombu_missing_consumer_retry_timeout = 60

integer value

How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.

kombu_reconnect_delay = 1.0

floating point value

How long to wait before reconnecting in response to an AMQP consumer cancel notification.

notification_listener_prefetch_count = 100

integer value

Max number of not acknowledged message which RabbitMQ can send to notification listener.

notification_persistence = False

boolean value

Persist notification messages.

notification_retry_delay = 0.25

floating point value

Reconnecting retry delay in case of connectivity problem during sending notification message

pool_max_overflow = 0

integer value

Maximum number of connections to create above pool_max_size.

pool_max_size = 30

integer value

Maximum number of connections to keep queued.

pool_recycle = 600

integer value

Lifetime of a connection (since creation) in seconds or None for no recycling. Expired connections are closed on acquire.

pool_stale = 60

integer value

Threshold at which inactive (since release) connections are considered stale in seconds or None for no staleness. Stale connections are closed on acquire.

pool_timeout = 30

integer value

Default number of seconds to wait for a connections to available

rabbit_ha_queues = False

boolean value

Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA ^(?!amq\.).* {"ha-mode": "all"} "

rabbit_host = localhost

string value

The RabbitMQ broker address where a single node is used.

rabbit_hosts = [u'$rabbit_host:$rabbit_port']

list value

RabbitMQ HA cluster host:port pairs.

rabbit_interval_max = 30

integer value

Maximum interval of RabbitMQ connection retries. Default is 30 seconds.

rabbit_login_method = AMQPLAIN

string value

The RabbitMQ login method.

rabbit_max_retries = 0

integer value

Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry count).

rabbit_password = guest

string value

The RabbitMQ password.

rabbit_port = 5672

port value

The RabbitMQ broker port where a single node is used.

rabbit_qos_prefetch_count = 0

integer value

Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.

rabbit_retry_backoff = 2

integer value

How long to backoff for between retries when connecting to RabbitMQ.

rabbit_retry_interval = 1

integer value

How frequently to retry connecting with RabbitMQ.

rabbit_transient_queues_ttl = 1800

integer value

Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.

rabbit_userid = guest

string value

The RabbitMQ userid.

rabbit_virtual_host = /

string value

The RabbitMQ virtual host.

rpc_listener_prefetch_count = 100

integer value

Max number of not acknowledged message which RabbitMQ can send to rpc listener.

rpc_queue_expiration = 60

integer value

Time to live for rpc queues without consumers in seconds.

rpc_reply_exchange = ${control_exchange}_rpc_reply

string value

Exchange name for receiving RPC replies

rpc_reply_listener_prefetch_count = 100

integer value

Max number of not acknowledged message which RabbitMQ can send to rpc reply listener.

rpc_reply_retry_attempts = -1

integer value

Reconnecting retry count in case of connectivity problem during sending reply. -1 means infinite retry during rpc_timeout

rpc_reply_retry_delay = 0.25

floating point value

Reconnecting retry delay in case of connectivity problem during sending reply.

rpc_retry_delay = 0.25

floating point value

Reconnecting retry delay in case of connectivity problem during sending RPC message

socket_timeout = 0.25

floating point value

Set socket timeout in seconds for connection’s socket

ssl = None

boolean value

Enable SSL

`ssl_ca_file = `

string value

SSL certification authority file (valid only if SSL enabled).

`ssl_cert_file = `

string value

SSL cert file (valid only if SSL enabled).

`ssl_key_file = `

string value

SSL key file (valid only if SSL enabled).

ssl_options = None

dict value

Arguments passed to ssl.wrap_socket

`ssl_version = `

string value

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

tcp_user_timeout = 0.25

floating point value

Set TCP_USER_TIMEOUT in seconds for connection’s socket

3.1.21. oslo_messaging_zmq

The following table outlines the options available under the [oslo_messaging_zmq] group in the /etc/cinder/cinder.conf file.

Table 3.21. oslo_messaging_zmq

Configuration option = Default valueTypeDescription

rpc_ack_timeout_base = 15

integer value

Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.

rpc_ack_timeout_multiplier = 2

integer value

Number to multiply base ack timeout by after each retry attempt.

rpc_message_ttl = 300

integer value

Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server.

rpc_poll_timeout = 1

integer value

The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.

rpc_retry_attempts = 3

integer value

Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries, None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled.

rpc_thread_pool_size = 100

integer value

Maximum number of (green) threads to work concurrently.

rpc_use_acks = False

boolean value

Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB.

rpc_zmq_bind_address = *

string value

ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or resolve to this address.

rpc_zmq_bind_port_retries = 100

integer value

Number of retries to find free port number before fail with ZMQBindError.

rpc_zmq_contexts = 1

integer value

Number of ZeroMQ contexts, defaults to 1.

rpc_zmq_host = ccsosp-undercloud.usersys.redhat.com

string value

Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova.

rpc_zmq_ipc_dir = /var/run/openstack

string value

Directory for holding IPC sockets.

rpc_zmq_matchmaker = redis

string value

MatchMaker driver.

rpc_zmq_max_port = 65536

integer value

Maximal port number for random ports range.

rpc_zmq_min_port = 49153

port value

Minimal port number for random ports range.

rpc_zmq_serialization = json

string value

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

rpc_zmq_topic_backlog = None

integer value

Maximum number of ingress messages to locally buffer per topic. Default is unlimited.

subscribe_on = []

list value

List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the matchmaker.

use_dynamic_connections = False

boolean value

This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct connections for direct message types (ignored otherwise).

use_pub_sub = False

boolean value

Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.

use_router_proxy = False

boolean value

Use ROUTER remote proxy.

zmq_failover_connections = 2

integer value

How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.

zmq_immediate = True

boolean value

This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it.

zmq_linger = -1

integer value

Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Positive values specify an upper bound for the linger period.

zmq_target_expire = 300

integer value

Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).

zmq_target_update = 180

integer value

Update period in seconds of a name service record about existing target.

zmq_tcp_keepalive = -1

integer value

Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively.

zmq_tcp_keepalive_cnt = -1

integer value

The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_idle = -1

integer value

The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_intvl = -1

integer value

The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

3.1.22. oslo_middleware

The following table outlines the options available under the [oslo_middleware] group in the /etc/cinder/cinder.conf file.

Table 3.22. oslo_middleware

Configuration option = Default valueTypeDescription

enable_proxy_headers_parsing = False