Chapter 3. Integrate with IdM using novajoin

Novajoin allows you to enroll your nodes with Red Hat Identity Manager (IdM) as part of the deployment process. As a result, you can integrate IdM features with your OpenStack deployment, including identities, kerberos credentials, and access controls.

Note

IdM enrollment through novajoin is currently only available for the undercloud and overcloud nodes. Novajoin integration for overcloud instances is expected to be supported in a later release.

3.1. Install and configure novajoin in the undercloud

3.1.1. Add the undercloud to the CA

Before deploying the overcloud, you must add the undercloud to the Certificate Authority (CA):

  1. On the undercloud node, install the python-novajoin package:

    $ sudo yum install python-novajoin
  2. On the undercloud node, run the novajoin-ipa-setup script, adjusting the values to suit your deployment:

    $ sudo /usr/libexec/novajoin-ipa-setup \
        --principal admin \
        --password <IdM admin password> \
        --server <IdM server hostname> \
        --realm <overcloud cloud domain (in upper case)> \
        --domain <overcloud cloud domain> \
        --hostname <undercloud hostname> \
        --precreate

    In the following section, you will use the resulting One-Time Password (OTP) to enroll the undercloud.

3.1.2. Add the undercloud to IdM

This procedure registers the undercloud with IdM and configures novajoin.

  1. The novajoin service is disabled by default. To enable it, add an entry to undercloud.conf:

    enable_novajoin = true
  2. You need set a One-Time Password (OTP) to register the undercloud node with IdM:

    ipa_otp = <otp>
  3. Ensure the overcloud’s domain name served by neutron’s DHCP server matches the IdM domain (your kerberos realm in lowercase):

    overcloud_domain_name = <domain>
  4. Set the appropriate hostname for the undercloud:

    undercloud_hostname = <undercloud FQDN>
  5. Set IdM as the nameserver for the undercloud:

    undercloud_nameservers = <IdM IP>
  6. For larger environments, you will need to review the novajoin connection timeout values. In undercloud.conf, add a reference to a new file called undercloud-timeout.yaml:

    hieradata_override = /home/stack/undercloud-timeout.yaml

    Add the following options to undercloud-timeout.yaml. You can specify the timeout value in seconds, for example, 5:

    nova::api::vendordata_dynamic_connect_timeout: <timeout value>
    nova::api::vendordata_dynamic_read_timeout: <timeout value>
  7. Save the undercloud.conf file.
  8. Run the undercloud deployment command to apply the changes to your existing undercloud:

    $ openstack undercloud install

3.2. Install and configure novajoin in the overcloud

These sections describe how to register an overcloud node with IdM.

3.2.1. Configure overcloud DNS

For automatic detection of your IdM environment, and easier enrollment, consider using IdM as your DNS server:

  1. Connect to your undercloud:

    $ source ~/stackrc
  2. Configure the control plane subnet to use IdM as the DNS name server:

    $ openstack subnet set ctlplane-subnet --dns-nameserver  <idm_server_address>
  3. Set the DnsServers parameter in an environment file to use your IdM server:

    parameter_defaults:
      DnsServers: ["<idm_server_address>"]

    This parameter is usually defined in a custom network-environment.yaml file.

3.2.2. Configure overcloud to use novajoin

  1. To enable IdM integration, create a copy of the /usr/share/openstack-tripleo-heat-templates/environments/predictable-placement/custom-domain.yaml environment file:

    $ cp /usr/share/openstack-tripleo-heat-templates/environments/predictable-placement/custom-domain.yaml \
      /home/stack/templates/custom-domain.yaml
  2. Edit the /home/stack/templates/custom-domain.yaml environment file and set the CloudDomain and CloudName* values to suit your deployment. For example:

    parameter_defaults:
      CloudDomain: lab.local
      CloudName: overcloud.lab.local
      CloudNameInternal: overcloud.internalapi.lab.local
      CloudNameStorage: overcloud.storage.lab.local
      CloudNameStorageManagement: overcloud.storagemgmt.lab.local
      CloudNameCtlplane: overcloud.ctlplane.lab.local
  3. Include the following environment files in the overcloud deployment process:

    • /usr/share/openstack-tripleo-heat-templates/environments/enable-internal-tls.yaml
    • /usr/share/openstack-tripleo-heat-templates/environments/tls-everywhere-endpoints-dns.yaml
    • /home/stack/templates/custom-domain.yaml

      For example:

      openstack overcloud deploy \
        --templates \
         -e /usr/share/openstack-tripleo-heat-templates/environments/enable-internal-tls.yaml \
         -e /usr/share/openstack-tripleo-heat-templates/environments/tls-everywhere-endpoints-dns.yaml \
         -e /home/stack/templates/custom-domain.yaml \

      As a result, the deployed overcloud nodes will be automatically enrolled with IdM.

  4. This only sets TLS for the internal endpoints. For the external endpoints you can use the normal means of adding TLS with the ./tripleo-heat-templates/environments/enable-tls.yaml environment file (which must be modified to add your custom certificate and key). Consequently, your openstack deploy command would be similar to this:

    openstack overcloud deploy \
      --templates \
      -e /usr/share/openstack-tripleo-heat-templates/environments/enable-internal-tls.yaml \
      -e /usr/share/openstack-tripleo-heat-templates/environments/tls-everywhere-endpoints-dns.yaml \
      -e /home/stack/templates/custom-domain.yaml \
      -e /home/stack/templates/enable-tls.yaml
  5. Alternatively, you can also use IdM to issue your public certificates. In that case, you need to use the ./tripleo-heat-templates/environments/services/haproxy-public-tls-certmonger.yaml environment file. For example:

    openstack overcloud deploy \
      --templates \
       -e ./tripleo-heat-templates/environments/enable-internal-tls.yaml \
       -e /usr/share/openstack-tripleo-heat-templates/environments/tls-everywhere-endpoints-dns.yaml \
       -e /home/stack/templates/custom-domain.yaml \
       -e ./tripleo-heat-templates/environments/services/haproxy-public-tls-certmonger.yaml

3.3. Validate a node in IdM

  1. Locate an overcloud node in IdM and confirm that the host entry includes Keytab:True:

    $ ipa host-show overcloud-node-01
      Host name: overcloud-node-01.lab.local
      Principal name: host/overcloud-node-01.lab.local@LAB.LOCAL
      Principal alias: host/overcloud-node-01.lab.local@LAB.LOCAL
      SSH public key fingerprint: <snip>
      Password: False
      Keytab: True
      Managed by: overcloud-node-01.lab.local
  2. SSH to the node and confirm that sssd can query IdM users. For example, to query an IdM user named susan:

    $ getent passwd susan
    uid=1108400007(susan) gid=1108400007(bob) groups=1108400007(susan)