AddVipsToEtcHosts

Set to true to append per network VIPs to /etc/hosts on each node. The default value is: True

CloudDomain

The DNS domain used for the hosts. This should match the dhcp_domain configured in the undercloud. The default value is: localdomain

CloudName

The DNS name of this cloud. The default value is: overcloud.localdomain

CloudNameCtlplane

The DNS name of this cloud’s storage management endpoint. The default value is: overcloud.ctlplane.localdomain

CloudNameInternal

The DNS name of this cloud’s internal API endpoint. The default value is: overcloud.internalapi.localdomain

CloudNameStorage

The DNS name of this cloud’s storage endpoint. E.g. ci-overcloud.storage.tripleo.org. The default value is: overcloud.storage.localdomain

CloudNameStorageManagement

The DNS name of this cloud’s storage management endpoint. The default value is: overcloud.storagemgmt.localdomain

ControlFixedIPs

Defines a fixed VIP for the Control Plane. Value uses the following format: [{ip_address:'1.2.3.4'}]

DeployIdentifier

Setting this to a unique value will re-run any deployment tasks that perform configuration on a Heat stack-update.

HypervisorNeutronPhysicalBridge

An Open vSwitch bridge to create on each hypervisor. This defaults to br-ex, which is the same as the control plane nodes. This ensures uniform configuration of the Open vSwitch agent. Typically should not need to be changed. The default value is: br-ex

HypervisorNeutronPublicInterface

What interface to add to the HypervisorNeutronPhysicalBridge. The default value is: nic1

InternalApiVirtualFixedIPs

Control the IP allocation for the InternalApiVirtualInterface port. Value uses the following format: [{ip_address:'1.2.3.4'}]

NeutronControlPlaneID

ID or name for Control Plane ctlplane network. The default value is: ctlplane

NeutronPublicInterface

The interface to bridge onto the external bridge for network nodes. The default value is: nic1

PublicVirtualFixedIPs

Control the IP allocation for the PublicVirtualInterface port. Value uses the following format: [{ip_address:'1.2.3.4'}]

RabbitCookieSalt

Salt for the RabbitMQ cookie. Change to force the randomly generated RabbitMG cookie to change. The default value is: unset

RedisVirtualFixedIPs

Control the IP allocation for the virtual IP used by Redis. Value uses the following format: [{ip_address:'1.2.3.4'}]

ServerMetadata

Extra properties or metadata passed to Nova for the created nodes in the overcloud. Accessible through the Nova metadata API.

StorageMgmtVirtualFixedIPs

Control the IP allocation for the StorageMgmgVirtualInterface port. Value uses the following format: [{ip_address:'1.2.3.4'}]

StorageVirtualFixedIPs

Control the IP allocation for the StorageVirtualInterface port. Value uses the following format: [{ip_address:'1.2.3.4'}]

UpdateIdentifier

Set to a previously unused value during stack-update triggers package update on all nodes.

_ROLE_Count

The number of nodes to deploy in a role.

_ROLE_HostnameFormat

Format for node hostnames. Note that %index% is translated into the index of the node (e.g 0/1/2) and %stackname% is replaced with the stack name (e.g overcloud). The default value is: %stackname%-_ROLE_-%index%

_ROLE_RemovalPolicies

List of resources to be removed from the role’s ResourceGroup when doing an update that requires removal of specific resources.

_ROLE_SchedulerHints

Optional scheduler hints to pass to OpenStack Compute (nova).

_ROLE_Services

A list of service resources (configured in the Heat resource_registry) which represent nested stacks for each service that should get installed on the ROLE role.

CephAdminKey

The Ceph admin client key. Can be created with: ceph-authtool --gen-print-key

CephClientKey

The Ceph client key. Currently only used for external Ceph deployments to create the openstack user keyring. Can be created with: ceph-authtool --gen-print-key

CephClusterFSID

The Ceph cluster FSID. Must be a UUID.

CephIPv6

Enables Ceph daemons to bind to IPv6 addresses. The default is: false

CephMonKey

The Ceph monitors key. Can be created with: ceph-authtool --gen-print-key

CephPools

Override settings for one of the predefined pools or to create additional ones. Example: { "volumes": { "size": 5, "pg_num": 128, "pgp_num": 128 } }

CephValidationDelay

Interval (in seconds) in between validation checks. The default value is: 30

CephValidationRetries

Number of retry attempts for Ceph validation. The default value is: 40

CinderBackupRbdPoolName

Pool to use if Block Storage (cinder) Backup is enabled. The default is: backups

CinderRbdPoolName

Pool to use for Block Storage (cinder) service. The default is: volumes

ControllerEnableCephStorage

Whether to deploy Ceph Storage (OSD) on the Controller. The default value is: False

GlanceBackend

The short name of the Glance backend to use. Set to rbd to use Ceph Storage.`

GlanceRbdPoolName

Pool to use for Image Storage (glance) service. The default is: images

GnocchiRbdPoolName

Pool to use for Telemetry storage. The default is: metrics

IgnoreCephUpgradeWarnings

If enabled, Ceph upgrade will be forced even though cluster or PGs status is not clean. The default value is: False

ManilaCephFSDataPoolName

Pool to use for file share storage. The default is: manila_data

ManilaCephFSMetadataPoolName

Pool to use for file share metadata storage. The default is: manila_metadata

NovaEnableRbdBackend

Whether to enable the Ceph backend for Compute (nova). The default value is: False

NovaRbdPoolName

Pool to use for Compute storage. The default is: vms

CephRgwKey

The cephx key for the radosgw client. Can be created with: ceph-authtool --gen-print-key

CinderCronDbPurgeAge

Cron to move deleted instances to another table - Age. The default value is: 0

CinderCronDbPurgeDestination

Cron to move deleted instances to another table - Log destination. The default value is: /var/log/cinder/cinder-rowsflush.log

CinderCronDbPurgeHour

Cron to move deleted instances to another table - Hour. The default value is: 0

CinderCronDbPurgeMinute

Cron to move deleted instances to another table - Minute. The default value is: 1

CinderCronDbPurgeMonth

Cron to move deleted instances to another table - Month. The default value is: *

CinderCronDbPurgeMonthday

Cron to move deleted instances to another table - Month Day. The default value is: *

CinderCronDbPurgeUser

Cron to move deleted instances to another table - User. The default value is: keystone

CinderCronDbPurgeWeekday

Cron to move deleted instances to another table - Week Day. The default value is: *

CinderEnableDBPurge

Whether to create cron job for purging soft deleted rows in Cinder database. The default value is: True

CinderPassword

The password for the cinder service account, used by cinder-api.

CinderWorkers

Set the number of workers for the block storage service. The default value is equal to the number of CPU cores on the node. Note that more workers creates a larger number of processes on systems, which results in excess memory consumption. It is recommended to choose a suitable non-default value on systems with high CPU core counts.

GlanceBackend

The short name of the backend to use. Should be one of swift, rbd, or file. The default value is: swift

GlanceLogFile

The filepath of the file to use for logging messages from Glance.

GlanceNfsEnabled

When using GlanceBackend: file, mount NFS share for image storage. The default value is: False

GlanceNfsOptions

NFS mount options for image storage when GlanceNfsEnabled is true. The default value is: intr,context=system_u:object_r:glance_var_lib_t:s0

GlanceNfsShare

NFS share to mount for image storage when GlanceNfsEnabled is true.

GlanceNotifierStrategy

Strategy to use for Glance notification queue. The default value is: noop

GlancePassword

The password for the image storage service and database account.

GlanceWorkers

Set the number of workers for the image storage service. The default value is equal to the number of CPU cores on the node. Note that more workers creates a larger number of processes on systems, which results in excess memory consumption. It is recommended to choose a suitable non-default value on systems with high CPU core counts.

HeatAuthEncryptionKey

Auth encryption key for heat-engine.

HeatConvergenceEngine

Enables the heat engine with the convergence architecture. The default value is: True

HeatCronPurgeDeletedAge

Cron to purge db entries marked as deleted and older than $age - Age. The default value is: 30

HeatCronPurgeDeletedAgeType

Cron to purge db entries marked as deleted and older than $age - Age type. The default value is: days

HeatCronPurgeDeletedDestination

Cron to purge db entries marked as deleted and older than $age - Log destination. The default value is: /dev/null

HeatCronPurgeDeletedEnsure

Cron to purge db entries marked as deleted and older than $age - Ensure. The default value is: present

HeatCronPurgeDeletedHour

Cron to purge db entries marked as deleted and older than $age - Hour. The default value is: 0

HeatCronPurgeDeletedMaxDelay

Cron to purge db entries marked as deleted and older than $age - Max Delay. The default value is: 3600

HeatCronPurgeDeletedMinute

Cron to purge db entries marked as deleted and older than $age - Minute. The default value is: 1

HeatCronPurgeDeletedMonth

Cron to purge db entries marked as deleted and older than $age - Month. The default value is: *

HeatCronPurgeDeletedMonthday

Cron to purge db entries marked as deleted and older than $age - Month Day. The default value is: *

HeatCronPurgeDeletedUser

Cron to purge db entries marked as deleted and older than $age - User. The default value is: heat

HeatCronPurgeDeletedWeekday

Cron to purge db entries marked as deleted and older than $age - Week Day. The default value is: *

HeatEnableDBPurge

Whether to create cron job for purging soft deleted rows in the Heat database. The default value is: True

HeatMaxResourcesPerStack

Maximum resources allowed per top-level stack. -1 stands for unlimited. The default value is: 1000

HeatPassword

The password for the Orchestration service and database account.

HeatStackDomainAdminPassword

The admin password for the OpenStack Orchestration (heat) domain in OpenStack Identity (keystone).

HeatWorkers

Number of workers for Heat service. The default value is: 0. Note that more workers creates a larger number of processes on systems, which results in excess memory consumption. It is recommended to choose a suitable non-default value on systems with high CPU core counts.

HorizonAllowedHosts

A list of IP/Hostname for the server Horizon is running on. Used for header checks. The default value is: *

HorizonPasswordValidator

Regex for password validation.

HorizonPasswordValidatorHelp

Help text for password validation.

HorizonSecret

Secret key for the webserver.

MemcachedIPv6

Enable IPv6 features in Memcached. The default value is: False

IronicCleaningDiskErase

Type of disk cleaning before and between deployments. full for full cleaning. metadata to clean only disk metadata (partition table). The default value is: full

IronicCleaningNetwork

Name or UUID of the overcloud network used for cleaning bare metal nodes. The default value of provisioning can be left during the initial deployment (when no networks are created yet) and should be changed to an actual UUID in a post-deployment stack update.

IronicEnabledDrivers

Enabled Ironic drivers. The default value is: ['pxe_ipmitool', 'pxe_drac', 'pxe_ilo']

IronicIPXEEnabled

Whether to use iPXE instead of PXE for deployment. The default value is: True

IronicIPXEPort

Port to use for serving images when iPXE is used. The default value is: 8088

IronicPassword

The password for the Bare Metal service and database account.

AdminEmail

The email for the OpenStack Identity (keystone) admin account. The default value is: admin@example.com

AdminPassword

The password for the OpenStack Identity (keystone) admin account.

AdminToken

The OpenStack Identity (keystone) secret and database password.

KeystoneCredential0

The first OpenStack Identity (keystone) credential key. Must be a valid key.

KeystoneCredential1

The second OpenStack Identity (keystone) credential key. Must be a valid key.

KeystoneCronTokenFlushDestination

Cron to purge expired tokens - Log destination. The default value is: /var/log/keystone/keystone-tokenflush.log

KeystoneCronTokenFlushEnsure

Cron to purge expired tokens - Ensure. The default value is: present

KeystoneCronTokenFlushHour

Cron to purge expired tokens - Hour. The default value is: 0

KeystoneCronTokenFlushMaxDelay

Cron to purge expired tokens - Max Delay. The default value is: 0

KeystoneCronTokenFlushMinute

Cron to purge expired tokens - Minute. The default value is: 1

KeystoneCronTokenFlushMonth

Cron to purge expired tokens - Month. The default value is: *

KeystoneCronTokenFlushMonthday

Cron to purge expired tokens - Month Day. The default value is: *

KeystoneCronTokenFlushUser

Cron to purge expired tokens - User. The default value is: keystone

KeystoneCronTokenFlushWeekday

Cron to purge expired tokens - Week Day. The default value is: *

KeystoneEnableDBPurge

Whether to create cron job for purging soft deleted rows in Keystone database. The default value is: True

KeystoneFernetKey0

The first OpenStack Identity (keystone) fernet key. Must be a valid key.

KeystoneFernetKey1

The second OpenStack Identity (keystone) fernet key. Must be a valid key.

KeystoneLDAPBackendConfigs

Hash containing the configurations for the LDAP backends configured in keystone.

KeystoneLDAPDomainEnable

Trigger to call ldap_backend puppet keystone define. The default value is: False

KeystoneNotificationDriver

Comma-separated list of Oslo notification drivers used by Keystone. The default value is: ['messaging']

KeystoneNotificationFormat

The OpenStack Identity (keystone) notification format. The default value is: basic

KeystoneSSLCertificate

Keystone certificate for verifying token validity.

KeystoneSSLCertificateKey

Keystone key for signing tokens.

KeystoneTokenProvider

The OpenStack Identity (keystone) token format. The default value is: uuid

KeystoneWorkers

Set the number of workers for the OpenStack Identity (keystone) service. The default value is equal to the number of CPU cores on the node. Note that more workers creates a larger number of processes on systems, which results in excess memory consumption. It is recommended to choose a suitable non-default value on systems with high CPU core counts.

ManilaPassword

The password for the shared file service account.

EnableConfigPurge

Remove configuration that is not generated by the director. Used to avoid configuration remnants after upgrades. The default value is: False

NeutronAgentExtensions

Comma-separated list of extensions enabled for the Neutron agents. The default value is: qos

NeutronAllowL3AgentFailover

Allow automatic l3-agent failover. The default value is: True

NeutronBridgeMappings

The logical to physical bridge mappings to use. The default (datacentre:br-ex) maps br-ex (the external bridge on hosts) to a physical name datacentre, which provider networks can use (for example, the default floating network). If changing this, either use different post-install network scripts or be sure to keep datacentre as a mapping network name.

NeutronCorePlugin

The core plugin for networking. The value should be the entrypoint to be loaded from neutron.core_plugins namespace. The default value is: ml2

NeutronDhcpAgentDnsmasqDnsServers

List of servers to use as dnsmasq forwarders.

NeutronDhcpAgentsPerNetwork

The number of DHCP agents to schedule per network. The default value is: 0

NeutronEnableARPResponder

Enable ARP responder feature in the OVS Agent. The default value is: False

NeutronEnableDVR

Enable Distributed Virtual Router. The default value is: False

NeutronEnableForceMetadata

If True, DHCP always provides metadata route to VM. The default value is: False

NeutronEnableIsolatedMetadata

If True, DHCP allows metadata support on isolated networks. The default value is: False

NeutronEnableL2Pop

Enable/disable the L2 population feature in the Neutron agents. The default value is: False

NeutronEnableMetadataNetwork

If True, DHCP provides metadata network. Requires either NeutronEnableIsolatedMetadata or NeutronEnableForceMetadata parameters to also be True. The default value is: False

NeutronExternalNetworkBridge

Name of bridge used for external network traffic. Usually L2 agent handles port wiring into external bridge, and hence the parameter should be unset.

NeutronFlatNetworks

Sets the flat network name to configure in plugins. The default value is: datacentre

NeutronGlobalPhysnetMtu

MTU of the underlying physical network. OpenStack Networking (neutron) uses this value to calculate MTU for all virtual network components. For flat and VLAN networks, OpenStack Networking uses this value without modification. For overlay networks such as VXLAN, OpenStack Networking automatically subtracts the overlay protocol overhead from this value. The default value is: 1500

NeutronL3AgentMode

Agent mode for L3 agent. Must be legacy or dvr_snat. The default value is: legacy

NeutronMechanismDrivers

The mechanism drivers for the tenant network. The default value is: openvswitch

NeutronMetadataProxySharedSecret

Shared secret to prevent spoofing.

NeutronNetworkType

The tenant network type. The default value is: vxlan

NeutronNetworkVLANRanges

The Neutron ML2 and Open vSwitch VLAN mapping range to support. Defaults to permitting any VLAN on the datacentre physical network (See NeutronBridgeMappings). The default value is: datacentre:1:1000

NeutronOVSFirewallDriver

Configure the classname of the firewall driver to use for implementing security groups. Possible values depend on system configuration. Some examples are: noop, openvswitch, iptables_hybrid. The default value of an empty string results in a default supported configuration.

NeutronPassword

The password for the OpenStack Networking (neutron) service and database account.

NeutronPluginExtensions

Comma-separated list of enabled extension plugins. The default value is: qos,port_security

NeutronServicePlugins

Comma-separated list of service plugin entrypoints. The default value is: router,qos,trunk

NeutronTunnelIdRanges

Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE tunnel IDs that are available for tenant network allocation. The default value is: ['1:4094']

NeutronTunnelTypes

The tunnel types for the tenant network. The default value is: vxlan

NeutronTypeDrivers

Comma-separated list of network type driver entrypoints to be loaded. The default value is: vxlan,vlan,flat,gre

NeutronVniRanges

Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of VXLAN VNI IDs that are available for tenant network allocation. The default value is: ['1:4094']

NeutronWorkers

Sets the number of API and RPC workers for the OpenStack Networking service. The default value is equal to the number of CPU cores on the node. Note that more workers creates a larger number of processes on systems, which results in excess memory consumption. It is recommended to choose a suitable non-default value on systems with high CPU core counts.

EnableConfigPurge

Remove configuration that is not generated by the director. Used to avoid configuration remnants after upgrades. The default value is: False

InstanceNameTemplate

Template string to be used to generate instance names. The default value is: instance-%08x

LibvirtEnabledPerfEvents

This is a performance event list which could be used as monitor. For example: cmt,mbml,mbmt.

MigrationSshKey

SSH key for migration. Expects a dictionary with keys public_key and private_key. Values should be identical to SSH public/private key files.

NeutronMetadataProxySharedSecret

Shared secret to prevent spoofing.

NovaComputeLibvirtType

Libvirt domain type. Defaults to kvm.

NovaComputeLibvirtVifDriver

Libvirt VIF driver configuration for the network.

NovaCronArchiveDeleteRowsDestination

Cron to move deleted instances to another table - Log destination. The default value is: /var/log/nova/nova-rowsflush.log

NovaCronArchiveDeleteRowsHour

Cron to move deleted instances to another table - Hour. The default value is: 0

NovaCronArchiveDeleteRowsMaxRows

Cron to move deleted instances to another table - Max Rows. The default value is: 100

NovaCronArchiveDeleteRowsMinute

Cron to move deleted instances to another table - Minute. The default value is: 1

NovaCronArchiveDeleteRowsMonth

Cron to move deleted instances to another table - Month. The default value is: *

NovaCronArchiveDeleteRowsMonthday

Cron to move deleted instances to another table - Month Day. The default value is: *

NovaCronArchiveDeleteRowsUntilComplete

Cron to move deleted instances to another table - Until complete. The default value is: False

NovaCronArchiveDeleteRowsUser

Cron to move deleted instances to another table - User. The default value is: nova

NovaCronArchiveDeleteRowsWeekday

Cron to move deleted instances to another table - Week Day. The default value is: *

NovaDbSyncTimeout

Timeout for OpenStack Compute (nova) database synchronization in seconds. The default value is: 300

NovaDefaultFloatingPool

Default pool for floating IP addresses. The default value is: public

NovaEnableDBPurge

Whether to create cron job for purging soft deleted rows in Nova database. The default value is: True

NovaIPv6

Enable IPv6 features for OpenStack Compute (nova). The default is: false

NovaOVSBridge

Name of integration bridge used by Open vSwitch. The default value is: br-int

NovaPCIPassthrough

YAML list of PCI passthrough whitelist parameters.

NovaPassword

The password for the OpenStack Compute (nova) service and database account.

NovaPlacementAPIInterface

Endpoint interface to be used for the placement API. The default value is: internal

NovaReservedHostMemory

Reserved RAM for host processes. The default value is: 2048

NovaSchedulerAvailableFilters

List of scheduler available filters.

NovaSchedulerDefaultFilters

An array of filters OpenStack Compute (nova) uses to filter a node. OpenStack Compute applies these filters in the order they are listed. Place your most restrictive filters first to make the filtering process more efficient.

NovaVcpuPinSet

A list or range of physical CPU cores to reserve for virtual machine processes. For example, NovaVcpuPinSet: [4-12,^8] reserves cores from 4-12 excluding 8.

NovaWorkers

Number of workers for the Compute’s Conductor service. The default value is: 0. Note that more workers creates a larger number of processes on systems, which results in excess memory consumption.

UpgradeLevelNovaCompute

OpenStack Compute upgrade level. The default value is: auto

SaharaPassword

The password for the clusting service and database account.

SaharaPlugins

Clusting enabled plugin list. The default value is: ['ambari', 'cdh', 'mapr', 'vanilla', 'spark', 'storm']

SaharaWorkers

Set the number of workers for the clusting service. The default value is: 0. Note that more workers creates a larger number of processes on systems, which results in excess memory consumption. It is recommended to choose a suitable non-default value on systems with high CPU core counts.

ControllerEnableSwiftStorage

Whether to enable object storage on Controller nodes. The default value is: True

SwiftCeilometerPipelineEnabled

Set to False to disable the object storage proxy ceilometer pipeline. The default value is: True

SwiftHashSuffix

A random string to be used as a salt when hashing to determine mappings in the ring.

SwiftMinPartHours

The minimum time (in hours) before a partition in a ring can be moved following a rebalance. The default value is: 1

SwiftMountCheck

Check if the devices are mounted to prevent accidentally writing to the root device. The default value is: False

SwiftPartPower

Partition power to use when building object storage rings. The default value is: 10

SwiftPassword

The password for the object storage service account.

SwiftProxyNodeTimeout

Timeout for requests going from swift-proxy to account, container, and object services. The default value is: 60

SwiftRawDisks

Additional raw devices to use for the object storage backend. For example: {sdb: {}}

SwiftReplicas

Number of replicas to use in the object storage rings. The default value is: 3

SwiftRingBuild

Whether to manage object storage rings or not. The default value is: True

SwiftUseLocalDir

Use a local directory for object storage services when building rings. The default value is: True

SwiftWorkers

Number of workers for object storage service. The default value is: 0. Note that more workers creates a larger number of processes on systems, which results in excess memory consumption. It is recommended to choose a suitable non-default value on systems with high CPU core counts.

AodhPassword

The password for the OpenStack Telemetry Alarming (aodh) services.

CeilometerApiEndpoint

Whether to create or skip legacy Telemetry API endpoint. Set this to false to disable legacy Telemetry API service. The default value is: True.

CeilometerBackend

The Telemetry backend type. The default value is: mongodb

CeilometerEventDispatcher

Comma-separated list of Dispatchers to process events data. The default value is: ['panko', 'gnocchi']

CeilometerMeterDispatcher

Comma-seperated list of Dispatcher to process meter data. The default value is: ['gnocchi']

CeilometerMeteringSecret

Secret shared by the Telemetry services.

CeilometerPassword

The password for the Telemetry service account.

CeilometerWorkers

Number of workers for the Telemetry service. The default value is: 0. Note that more workers creates a larger number of processes on systems, which results in excess memory consumption. It is recommended to choose a suitable non-default value on systems with high CPU core counts.

GnocchiBackend

The short name of the OpenStack Telemetry Metrics (gnocchi) backend to use. Should be one of swift, rbd, or file. The default value is: swift

GnocchiIndexerBackend

The short name of the OpenStack Telemetry Metrics (gnocchi) indexer backend to use. The default value is: mysql

GnocchiMetricdWorkers

Number of workers for OpenStack Telemetry Metrics (gnocchi). The default value is equal to the number of CPU cores on the node. Note that more workers creates a larger number of processes on systems, which results in excess memory consumption. It is recommended to choose a suitable non-default value on systems with high CPU core counts.

GnocchiPassword

The password for the OpenStack Telemetry Metrics (gnocchi) service and database account.

MongoDbIPv6

Enable IPv6 if MongoDB VIP is IPv6. The default value is: False

MongoDbNoJournal

Should MongoDb journaling be disabled. The default value is: False

PankoPassword

The password for the panko services.

NtpServer

NTP servers list. The default value is: ['pool.ntp.org']

TimeZone

The timezone to be set on the overcloud. The default value is: UTC