Red Hat Training

A Red Hat training course is available for Red Hat OpenStack Platform

Chapter 4. Configuring the OpenStack Integration Test Suite

4.1. Creating a Workspace

  1. Source the admin credentials:

    • In the undercloud:

      $ source stackrc
    • Or in the overcloud:

      $ source overcloudrc
  2. Initialize tempest:

    $ cd ~
    $ mkdir mytempest
    $ cd mytempest
    $ /usr/share/openstack-tempest-13.0.0/tools/configure-tempest-directory

    This creates a tempest workspace named mytempest for your user account.

  3. Generate the etc/tempest.conf file:

    $ python tools/config_tempest.py --deployer-input ~/tempest-deployer-input.conf --debug --create identity.uri $OS_AUTH_URL identity.admin_password $OS_PASSWORD --network-id _<uuid>_
    • uuid is the UUID of the external network.

      Note

      For offline systems, you can specify an existing glance image by adding the --image parameter. For example: --image cirros-0.3.4-x86_64-disk.img

  4. You can view a list of existing workspaces:

    $ tempest workspace list

4.2. Verifying Your Tempest Configuration

  1. Generate the .testr.conf in your tempest workspace:

    $ testr init
  2. Verify your current tempest configuration, specifying the tempest.conf file that was just generated:

    $ tempest verify-config -o ~/mytempest/etc/tempest.conf

4.3. Changing the Logging Configuration

The default location for log files is the logs directory within your tempest workspace.

  • To change this directory, in ~/mytempest/etc/tempest.conf, under the [DEFAULT] section, set log_dir to the desired directory:

    [DEFAULT]
    log_dir = _<directory>_
  • If you have your own logging configuration file, in ~/mytempest/etc/tempest.conf, under the [DEFAULT] section, set log_config_append to your file:

    [DEFAULT]
    log_config_append = _<file>_
Note

If this is set, all other logging configuration in tempest.conf will be ignored, including log_dir.

4.4. Configuring Microversion Tests

The OpenStack Integration Test Suite provides stable interfaces to test the API microversions. This section describes how to implement microversion tests using these interfaces. You first need to configure options in the tempest.conf configuration file to specify the target microversions. This is to make sure that the supported microversions match the microversions used in the OpenStack cloud. You can run multiple microversion tests in a single Integration Test Suite operation by specifying a range of target microversions.

For example, to limit the range of microversions for the compute service, in the [compute] section of your configuration file, assign values to the min_microversion and max_microversion parameters:

[compute]
min_microversion = 2.14
max_microversion = latest