Chapter 7. Known issues

Failover action reports RADOS block device image mount failed on the pod with RPC error still in use

Failing over a disaster recovery (DR) protected workload might result in pods using the volume on the failover cluster to be stuck in reporting RADOS block device (RBD) image is still in use. This prevents the pods from starting up for a long duration (upto several hours).

(BZ#2007376)

Failover action reports RADOS block device image mount failed on the pod with RPC error fsck

Failing over a disaster recovery (DR) protected workload may result in pods not starting with volume mount errors that state the volume has file system consistency check (fsck) errors. This prevents the workload from failing over to the failover cluster.

(BZ#2021460)

Creating an application namespace for the managed clusters

Application namespace needs to exist on RHACM managed clusters for disaster recovery (DR) related pre-deployment actions and hence is pre-created when an application is deployed at the RHACM hub cluster. However, if an application is deleted at the hub cluster and its corresponding namespace is deleted on the managed clusters, they reappear on the managed cluster.

Workaround: openshift-dr maintains a namespace manifestwork resource in the managed cluster namespace at the RHACM hub. These resources need to be deleted after the application deletion. For example, as a cluster administrator, execute the following command on the hub cluster: oc delete manifestwork -n <managedCluster namespace> <drPlacementControl name>-<namespace>-ns-mw.

(BZ#2059669)

RBD mirror scheduling is getting stopped for some images

The Ceph manager daemon gets blocklisted due to different reasons, which causes the scheduled RBD mirror snapshot from being triggered on the cluster where the image(s) are primary. All RBD images that are mirror enabled (hence DR protected) do not list a schedule when examined using rbd mirror snapshot schedule status -p ocs-storagecluster-cephblockpool, and hence are not actively mirrored to the peer site.

Workaround: Restart the Ceph manager deployment, on the managed cluster where the images are primary, to overcome the blocklist against the currently running instance, this can be done by scaling down and then later scaling up the ceph manager deployment as follows:

$ oc -n openshift-storage scale deployments/rook-ceph-mgr-a  --replicas=0
$ oc -n openshift-storage scale deployments/rook-ceph-mgr-a  --replicas=1

Result: Images that are DR enabled and denoted as primary on a managed cluster start reporting mirroring schedules when examined using rbd mirror snapshot schedule status -p ocs-storagecluster-cephblockpool

(BZ#2067095)

ceph df reports an invalid MAX AVAIL value when the cluster is in stretch mode

When a crush rule for a Red Hat Ceph Storage cluster has multiple "take" steps, the ceph df report shows the wrong maximum available size for the map. The issue will be fixed in an upcoming release.

(BZ#2100920)

Ceph does not recognize the global IP assigned by Globalnet

Ceph does not recognize global IP assigned by Globalnet, so disaster recovery solution cannot be configured between clusters with overlapping service CIDR using Globalnet. Due to this disaster recovery solution does not work when service CIDR overlaps.

(BZ#2102397)

Both the DRPCs protect all the persistent volume claims created on the same namespace

The namespaces that host multiple disaster recovery (DR) protected workloads, protect all the persistent volume claims (PVCs) within the namespace for each DRPlacementControl resource in the same namespace on the hub cluster that does not specify and isolate PVCs based on the workload using its spec.pvcSelector field.

This results in PVCs, that match the DRPlacementControl spec.pvcSelector across multiple workloads. Or, if the selector is missing across all workloads, replication management to potentially manage each PVC multiple times and cause data corruption or invalid operations based on individual DRPlacementControl actions.

Workaround: Label PVCs that belong to a workload uniquely, and use the selected label as the DRPlacementControl spec.pvcSelector to disambiguate which DRPlacementControl protects and manages which subset of PVCs within a namespace. It is not possible to specify the spec.pvcSelector field for the DRPlacementControl using the user interface, hence the DRPlacementControl for such applications must be deleted and created using the command line.

Result: PVCs are no longer managed by multiple DRPlacementControl resources and do not cause any operation and data inconsistencies.

(BZ#2111163)

MongoDB pod is in CrashLoopBackoff because of permission errors reading data in cephrbd volume

The OpenShift projects across different managed clusters have different security context constraints (SCC), which specifically differ in the specified UID range and/or FSGroups. This leads to certain workload pods and containers failing to start post failover or relocate operations within these projects, due to filesystem access errors in their logs.

Workaround: Ensure workload projects are created on all managed clusters with the same project-level SCC labels, allowing them to use the same filesystem context when failed over or relocated. Pods will no longer fail post-DR actions on filesystem-related access errors.

(BZ#2114573)

Application is stuck in Relocating state during relocate

Multicloud Object Gateway allowed multiple persistent volume (PV) objects of the same name or namespace to be added to the S3 store on the same path. Due to this, Ramen does not restore the PV because it detected multiple versions pointing to the same claimRef.

Workaround: Use S3 CLI or equivalent to clean up the duplicate PV objects from the S3 store. Keep only the one that has a timestamp closer to the failover or relocate time.

Result: The restore operation will proceed to completion and the failover or relocate operation proceeds to the next step.

(BZ#2120201)

Application is stuck in a FailingOver state when a zone is down

At the time of a failover or relocate, if none of the s3 stores are reachable then the failover or relocate process hangs. If the DR logs indicate that the S3 store is not reachable, then troubleshooting and getting the s3 store operational will allow the DR to proceed with the failover or relocate operation.

(BZ#2121680)

PeerReady state is set to true when a workload is failed over or relocated to the peer cluster until the cluster from where it was failed over or relocated from is cleaned up

After a disaster recovery (DR) action is initiated, the PeerReady condition is initially set to true for the duration when the workload is failed over or relocated to the peer cluster. After this it is set to false until the cluster from where it was failed over or relocated from is cleaned up for future actions. A user looking at DRPlacementControl status conditions for future actions may recognize this intermediate PeerReady state as a peer is ready for action and perform the same. This will result in the operation pending or failing and may require user intervention to recover from.

Workaround: Examine both Available and PeerReady states before performing any actions. Both should be true for a healthy DR state for the workload. Actions performed when both states are true will result in the requested operation progressing

(BZ#2138855)

Disaster recovery workloads remain stuck when deleted

When deleting a workload from a cluster, the corresponding pods might not terminate with events such as FailedKillPod. This might cause delay or failure in garbage collecting dependent DR resources such as the PVC, VolumeReplication, and VolumeReplicationGroup. It would also prevent a future deployment of the same workload to the cluster as the stale resources are not yet garbage collected.

Workaround: Reboot the worker node on which the pod is currently running and stuck in a terminating state. This results in successful pod termination and subsequently related DR API resources are also garbage collected.

(BZ#2159791)

Blocklisting can lead to Pods stuck in an error state

Blocklisting due to either network issues or a heavily overloaded or imbalanced cluster with huge tail latency spikes. Because of this, Pods get stuck in CreateContainerError with the message Error: relabel failed /var/lib/kubelet/pods/cb27938e-f66f-401d-85f0-9eb5cf565ace/volumes/kubernetes.io~csi/pvc-86e7da91-29f9-4418-80a7-4ae7610bb613/mount: lsetxattr /var/lib/kubelet/pods/cb27938e-f66f-401d-85f0-9eb5cf565ace/volumes/kubernetes.io~csi/pvc-86e7da91-29f9-4418-80a7-4ae7610bb613/mount/#ib_16384_0.dblwr: read-only file system.

Workaround: Reboot the node to which these pods are scheduled and failing by following these steps:

(BZ#2094320)

Poor performance of the stretch clusters on CephFS

Workloads with many small metadata operations might exhibit poor performance because of the arbitrary placement of metadata server (MDS) on multi-site Data Foundation clusters.

(BZ#1982116)

SELinux relabelling issue with a very high number of files

When attaching volumes to pods in Red Hat OpenShift Container Platform, the pods sometimes do not start or take an excessive amount of time to start. This behavior is generic and it is tied to how SELinux relabelling is handled by the Kubelet. This issue is observed with any filesystem based volumes having a very high file counts. In OpenShift Data Foundation, the issue is seen when using CephFS based volumes with a very high number of files. There are different ways to workaround this issue. Depending on your business needs you can choose one of the workarounds from the knowledgebase solution https://access.redhat.com/solutions/6221251.

(Jira#3327)

OpenShift Data Foundation dashboard crashes after upgrade

When OpenShift Container Platform and OpenShift Data Foundation are upgraded, the Data Foundation dashboard under the Storage section crashes with a "404: Page not found" error when dashboard link is clicked. This is because the pop-up that refreshes the console does not appear.

Workaround: Perform a hard refresh of the console. This brings back the dashboard and it will no longer crash.

(BZ#2157876)