7. Integrating LDAP Services for Authentication and Authorization

JBoss ON can incorporate LDAP directories to help manage users, authentication, and membership in roles. This simplifies user management in JBoss ON and also leverages existing organizational configuration (user accounts, groups, passwords, and account lockout policies) so that JBoss ON mirrors other infrastructure configuration.


If LDAP is used for user account management, then the LDAP directory should be the authoritative source for creating and managing user accounts. Otherwise, there can be inconsistencies in role memberships, account settings, or other user account conflict. See Issues Related to Using LDAP for a User Store.

7.1. Supported Directory Services

JBoss ON supports major directory servers for user authentication and group authorization:
  • Red Hat Directory Server 8.1 and 8.2
  • Microsoft Active Directory 2003 and 2008

7.2. How JBoss ON Uses LDAP for Authentication

By default, JBoss ON stores authentication information in its internal database. JBoss ON can also use an external LDAP repository to store this user information. With LDAP authentication, the JBoss ON server sends all login requests to the LDAP directory to process.
First, the JBoss ON server searches the LDAP directory for a matching username, and then it attempts to log into (bind to) the LDAP server using the given username and password. If the bind attempt is successful, then the user is successfully authenticated to the JBoss ON server.
After the JBoss ON server is configured to use LDAP for authentication, all login attempts are authenticated against the LDAP server.


When the JBoss ON server is reconfigured to use LDAP for authentication, the LDAP information isn't validated yet. Any errors with the LDAP authentication configuration won't show up until a user attempts to log into the UI.


The LDAP directory can't create JBoss ON users automatically. However, using LDAP for authentication allows new users to register themselves to JBoss ON. A new user can authenticate to JBoss ON as long as they have an LDAP account. At their first login attempt, they're redirected to a registration page which records the additional JBoss ON user information.
The JBoss ON server constructs the LDAP entry name to look for based on the JBoss ON username and information about the LDAP directory, like the parent distinguished name in the directory tree and the naming attribute used for user entries; from there, it dynamically constructs a search filter every time someone logs into JBoss ON. Custom attributes can be added to the LDAP schema, such as JONUser=true, which can make it easier and more precise to locate entries.
The LDAP directory only verifies the login credentials. The LDAP server doesn't store any other JBoss ON user data, and it doesn't create, delete, or edit entries in JBoss ON. Likewise, JBoss ON doesn't create, delete, or edit entries in the LDAP directory. The only attributes in the LDAP database that relate to JBoss ON user accounts are the username and password. Other settings in the JBoss ON user entry are stored in the JBoss ON internal database (like the user's first name and surname, email address, and role assignments).


The LDAP directory is used only to check the login credentials — it doesn't store any other information about the JBoss ON users, including role assignments, and it cannot create a JBoss ON user. The JBoss ON server also cannot create LDAP users, so the LDAP user has to be created separately.
Because the LDAP directory doesn't store other attributes related to JBoss ON, it can't store a user certificate. This means that JBoss ON cannot use an LDAP directory for certificate-based authentication.
Issues Related to Using LDAP for a User Store

Integrating LDAP directories introduces another area where users can be created and managed and where the membership of roles can be changed. On the one hand, this can make managing users much easier, especially by allowing existing users to register themselves seamlessly and by automatically updating role membership. However, because users can still be created in JBoss ON and added manually to JBoss ON, user and role management can become messy.

The first problem is simply determining which datastore to use to authenticate users. Even after LDAP authentication is enabled, JBoss ON still checks credentials against its own user store — and it checks its own database first. This means that a user can authenticate to JBoss ON without that request being sent to the LDAP database. All of the security features of the LDAP directory — particularly password policies and account inactivation — are lost because that is not the primary authentication mechanism.
Second, using two resources for user accounts introduces the problem of erroneously mapping JBoss ON and LDAP user accounts, creating duplicate entries, or allowing ghost entries. For example, John Smith is added as a user manually to JBoss ON and also has an LDAP user account. First, he has two duplicate, separately-managed user entries. Then, John Smith goes to a different division, and his LDAP entry is automatically deleted, but his JBoss ON user account remains because JBoss ON user accounts and LDAP user accounts aren't linked. He could still log into JBoss ON. Having duplicate user accounts can introduce other problems if there are accounts with identical names. For example, Jane Smith logs into JBoss ON with her JBoss ON user account (jsmith) and password, but is improperly assigned the JBoss ON role membership of LDAP user John Smith (LDAP UID jsmith) because her JBoss ON user ID was the same as his LDAP user ID, and her account was incorrectly mapped to his LDAP account and, therefore, his LDAP group membership.
Trying to maintain user accounts in both locations also impacts roles, at least in an administrative way. LDAP groups are added as members to the role, and then the group members are listed as user members for the role. However, the list of users assigned to the role does not show where those users came from. This means that the user list can be a mix of LDAP group members and JBoss ON members who were manually added to the list. Ultimately, it becomes difficult to add or remove users because it's not clear where the role users are coming from. Limiting role membership to LDAP groups simplifies maintenance; the roles are automatically updated when users are added or deleted to the groups on the LDAP side and those changes are synchronized over to the JBoss ON role dynamically.
LDAP Groups, JBoss ON Roles, and Role Members

Figure 33. LDAP Groups, JBoss ON Roles, and Role Members

What all of this means is that there are three things to consider when using LDAP services for authentication or authorization:
  • Only create regular user accounts in one place. If LDAP should be used for authentication, then only add or delete user accounts in the LDAP directory.
  • Ideally, limit JBoss ON user accounts to special, administrative users and rely on the LDAP directory for regular accounts.
  • Try to design roles around LDAP groups, meaning that JBoss ON user accounts in those roles should be limited to admin accounts or avoided altogether.

7.3. Configuring LDAP User Authentication

Authentication is the process of verifying the identity of an entity who attempts to access a server. JBoss ON uses simple authentication, meaning it uses simple username-password pairs to verify identity.
  1. In the top menu, click the Administration tab.
  2. In the Configuration menu table on the left, select the System Settings item.
  3. Jump to the LDAP Configuration Properties area.
  4. Check the Use LDAP Authentication checkbox so that JBoss ON will use the LDAP user directory as its identity store.
  5. Configure the connection settings to connect to the specific LDAP directory.
    • Give the LDAP URL of the LDAP server. This has the format ldap://hostname[:port]. For example:
      By default, this connects to the localhost over port 389 (standard LDAP port) or 636 (secure LDAP port, if SSL is selected).
    • To use a secure connection, check the Use SSL checkbox. When using SSL, make sure that the LDAP directory is actually running over SSL, and make sure that the connection URL points to the appropriate SSL port and protocol:
    • Give the bind credentials to use to connect to the server. The username is the full LDAP distinguished name of the user as whom JBoss ON binds to the directory.


      The user must exist in the LDAP directory before configuring the LDAP settings in JBoss ON. Otherwise, login attempts to the JBoss ON server will fail.
      Also, make sure that the JBoss ON user has appropriate read and search access to the user and group subtrees in the LDAP directory.
  6. Set the search parameters that JBoss ON uses when searching the LDAP directory for matching user entries.
    • The search base is the point in the directory tree where the server begins looking for entries. If this is used only for user authentication or if all JBoss ON-related entries are in the same subtree, then this can reference a specific subtree:
      If the users or groups are spread across the directory, then select the base DN:
    • Optionally, set a search filter to use to search for a specific subset of entries. This can improve search performance and results, particularly when all JBoss ON-related entries share a common LDAP attribute, like a custom JonUser attribute. The filter can use wild cards (objectclass=*) or specific values (JonUser=true).
    • Set the LDAP naming attribute; this is the element on the farthest left of the full distinguished name. For example, in uid=jsmith,ou=people,dc=example,dc=com, the far left element is uid=jsmith, and the naming attribute is uid.
      The default naming attribute in Active Directory is cn. In Red Hat Directory Server, the default naming attribute is uid.
  7. Save the LDAP settings.


    The Group Filter and Member Property fields aren't required for user authentication. They're used for configuring LDAP groups to be assigned to roles, as in Section 7.5, “Associating LDAP User Groups to Roles in JBoss ON”.

7.4. How JBoss ON Roles Work with LDAP User Groups

Many LDAP directories already contain organizational groups with users who will need to access resources in JBoss ON. Configuring JBoss ON to connect to these directories allows JBoss ON to assign LDAP groups to roles and then pull in those member lists dynamically, so the roles are populated with pre-existing member lists. All of the LDAP users automatically inherit the permissions of that role.
In the role details page, these LDAP user groups are separated from the resource groups, so it's easy to distinguish which types of group are being added to the role.
Groups Assigned to a Role

Figure 34. Groups Assigned to a Role

JBoss ON determines what LDAP groups a user belongs to with a simple search. Whenever a user logs into JBoss ON and an LDAP connection is configured, JBoss ON maps that JBoss ON username to a user entry in the LDAP directory server. The specific LDAP distinguished name (DN) for the user is used as part of a search to find matching member attributes in LDAP group entries. That is, the LDAP server can check the member lists in group entries to see what groups the person with that DN belongs to.
For LDAP groups to be added to roles, three things are required:
  • An LDAP directory server connection has to be configured.
  • There has to be an LDAP attribute given to search for group entries.
    For Active Directory, this is generally the group object class. For Red Hat Directory Server, this is generally groupOfUniqueNames. Other standard object classes are available, and it is also possible to use a custom, even JBoss ON-specific, object class.
  • There has to be an LDAP attribute given to identify members in the group.
    Common member attributes are member and uniqueMember.
JBoss ON constructs an LDAP search based on the group object class and member attribute in the server configuration, plus the DN of the user given when the user logs in.
For example, this looks for the member attribute on an Active Directory group:
ldapsearch -h server.example.com -x -D "cn=Administrator,cn=Users,dc=example,dc=com" -W -b "dc=example,dc=com" -x '(&(objectclass=group)(member=CN=John Smith,CN=Users,DC=example,DC=com))'
Red Hat Directory Server uses the uniqueMember attribute on groupOfUniqueNames groups more commonly than member and group. For example:
/usr/lib64/mozldap6/ldapsearch -D "cn=directory manager" -w secret -p 389 -h server.example.com -b "ou=People,dc=example,dc=com" -s sub "(&(objectclass=groupOfUniqueNames)(uniqueMember=uid=jsmith,ou=People,dc=example,dc=com))"
This search returns a list of all groups to which the user is a member. If any of these LDAP groups is assigned to a JBoss ON role, then that user is also automatically a member of that JBoss ON role.


Using custom LDAP group object classes can allow you to be very specific about which groups to use for JBoss ON roles.

7.5. Associating LDAP User Groups to Roles in JBoss ON

Authentication is the process of verifying someone's identity. Authorization is the process of determining what access permissions that identity has. Users are authorized to perform tasks based on the permissions granted to their role assignments.
Section 7.3, “Configuring LDAP User Authentication” describes how an LDAP directory server can be used to authenticate users to JBoss ON. Any time a user attempts to log in, that request — with the username and password — is simply forwarded to the specified LDAP directory server to see if the credentials are correct.
Members of LDAP groups can be pulled in, automatically, as members of JBoss ON roles. The LDAP group is associated with a JBoss ON role and then the group members are authorized to do whatever the JBoss ON role is configured to allow. Any changes made in the LDAP group members are automatically reflected in JBoss ON, without having to edit the JBoss ON role.
  1. In the top menu, click the Administration tab.
  2. In the Configuration menu table on the left, select the System Settings item.
  3. Jump to the LDAP Configuration Properties area.
  4. Set up the LDAP connections, as described in Section 7.3, “Configuring LDAP User Authentication”. It is not required that the LDAP directory be used as the identity store in order to configure LDAP authorization, but it is recommended.
  5. Set the parameters to use for the server to use to search for LDAP groups and their members.
    The search filter that JBoss ON constructs looks like this:
    • The Group Search Filter field sets how to search for the group entry. This is usually done by specifying the type of group to search for through its object class:
    • The Group Member Filter field gives the attribute that the specified group type uses to store member distinguished names. For example:
    The user_DN is dynamically supplied by JBoss ON when a user logs into the UI.
  6. Save the LDAP settings.