- Configure Authentication
- Join Active Directory Domain
- Verify/Test Active Directory and Services
7.2.1. Configure Authentication
- Ensure that CTDB is configured before the active directory join. For more information see, Section 6.3.1 Setting up CTDB for Samba in the Red Hat Gluster Storage Administration Guide.
- It is recommended to take backups of the configuration and of Samba’s databases (local and ctdb) before making any changes.
22.214.171.124. Basic Samba Configuration
autorid. Red Hat recommends
autoridbecause in addition to automatically calculating user and group identifiers like
tdb, it performs fewer database transactions and read operations, and is a prerequisite for supporting secure ID history (SID history).
/etc/samba/smb.confmust be identical on all nodes, and must contain the relevant parameters for AD. Along with that, a few other settings are required in order to activate mapping of user and group IDs.
[global] netbios name = RHS-SMB workgroup = ADDOM realm = addom.example.com security = ads clustering = yes idmap config * : backend = autorid idmap config * : range = 1000000-19999999 idmap config * : rangesize = 1000000 # -----------------RHS Options ------------------------- # # The following line includes RHS-specific configuration options. Be careful with this line. include = /etc/samba/rhs-samba.conf #=================Share Definitions =====================
globalsection required in the
smb.conffile. Ensure that nothing else appears in this section in order to prevent gluster mechanisms from changing settings when starting or stopping the ctdb lock volume.
netbios nameconsists of only one name which has to be the same name on all cluster nodes. Windows clients will only access the cluster via that name (either in this short form or as an FQDN). The individual node hostname (rhs-srv1, rhs-srv2, …) must not be used for the
- The idmap
rangedefines the lowerst and hightest identifier numbers that can be used. Specify a range large enough to cover the number of objects specified in
- The idmap
rangesizespecifies the number of identifiers available for each domain range. In this case there are one million identifiers per domain range, and the
rangeparameter indicates that there are nearly 19 million identifiers total, meaning that there are a total of 19 possible domain ranges.
- If you want to be able to use the individual host names to also access specific nodes, you can add them to the
netbios aliasesparameter of
- In an AD environment, it is usually not required to run
nmbd. However, if you have to run
nmbd, then make sure to set the
smb.confoption to the list of public IP addresses of the cluster.
126.96.36.199. Alternative Configuration using
idmap_admodule in addition to
idmap_admodule reads the unix IDs from the AD's special unix attributes. This has to be configured by the AD domain's administrator before it can be used by Samba and winbind.
idmap_ad, the AD domain admin has to prepare the AD domain for using the so called unix extensions and assign unix IDs to all users and groups that should be able to access the Samba server.
idmap_adbackend for the ADDOM domain. The default
autoridbackend catches all objects from domains other than the ADDOM domain.
[global] netbios name = RHS-SMB workgroup = ADDOM realm = addom.example.com security = ads clustering = yes idmap config * : backend = autorid idmap config * : range = 1000000-1999999 idmap config ADDOM : backend = ad idmap config ADDOM : range = 3000000-3999999 idmap config ADDOM : schema mode = rfc2307 winbind nss info = rfc2307 # -------------------RHS Options ------------------------------- # # The following line includes RHS-specific configuration options. Be careful with this line. include = /etc/samba/rhs-samba.conf #===================Share Definitions =========================
- The range for the idmap_ad configuration is prescribed by the AD configuration. This has to be obtained by AD administrator.
- Ranges for different idmap configurations must not overlap.
- The schema mode and the winbind nss info setting should have the same value. If the domain is at level 2003R2 or newer, then rfc2307 is the correct value. For older domains, additional values sfu and sfu20 are available. See the manual pages of idmap_ad and smb.conf for further details.
188.8.131.52. Verifying the Samba Configuration
# testparm -s Load smb config files from /etc/samba/smb.conf rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) Loaded services file OK. Server role: ROLE_DOMAIN_MEMBER # Global parameters [global] workgroup = ADDOM realm = addom.example.com netbios name = RHS-SMB security = ADS clustering = Yes winbind nss info = rfc2307 idmap config addom : schema mode = rfc2307 idmap config addom : range = 3000000-3999999 idmap config addom : backend = ad idmap config * : range = 1000000-1999999 idmap config * : backend = autorid
184.108.40.206. nsswitch Configuration
/etc/nsswitch.conffile. Make sure the file contains the winbind entries for the
groupdatabases. For example:
... passwd: files winbind group: files winbind ...
visibleon the individual cluster node once Samba is joined to AD and winbind is started.
7.2.2. Join Active Directory Domain
# onnode all systemctl start ctdb # onnode all systemctl stop winbind # onnode all systemctl stop smb
# onnode all service ctdb start # onnode all service winbind stop # onnode all service smb stop
- If your configuration has CTDB managing Winbind and Samba, they can be temporarily disabled with the following commands (to be executed prior to the above stop commands) so as to prevent CTDB going into an unhealthy state when they are shut down:
# onnode all ctdb event script disable legacy 49.winbind # onnode all ctdb event script disable legacy 50.samba
- For some versions of Red Hat Gluster Storage, a bug in the selinux policy prevents 'ctdb disablescript SCRIPT' from succeeding. If this is the case, 'chmod -x /etc/ctdb/events.d/SCRIPT' can be executed as a workaround from a root shell.
- Shutting down winbind and smb is primarily to prevent access to SMB services during this AD integration. These services may be left running but access to them should be prevented through some other means.
netutility from a single node:
# net ads join -U Administrator Enter Administrator's password: Using short domain name -- ADDOM Joined 'RHS-SMB' to dns domain addom.example.com' Not doing automatic DNS update in a clustered setup.
netutility can be used again:
# net ads dns register rhs-smb <PUBLIC IP 1> <PUBLIC IP 2> ...
rhs-smbwill resolve to the given public IP addresses. The DNS registrations use the cluster machine account for authentication in AD, which means this operation only can be done after the join has succeeded.
7.2.3. Verify/Test Active Directory and Services
# onnode all systemctl start nmb # onnode all systemctl stop winbind # onnode all systemctl stop smb
# onnode all service nmb start # onnode all service winbind start # onnode all service smb start
- If you previously disabled CTDB’s ability to manage Winbind and Samba they can be re-enabled with the following commands:
# onnode all ctdb event script enable legacy 50.samba # onnode all ctdb event script enable legacy 49.winbind
- With the latest ctdb-4.9.8-105.el7rhgs.x86_64 package, the paths of ctdb managed service scripts have changed. The script files are now available under /etc/ctdb/events/legacy/ after enabling them from /usr/share/ctdb/events/legacy.
- To enable ctdb event script, execute the following command:
ctdb event script enable legacy 49.winbind
- To enable ctbd event script on all nodes, execute the following command:
# onnode all ctdb event script enable legacy 49.winbind
- Verify the join by executing the following stepsVerify the join to check if the created machine account can be used to authenticate to the AD LDAP server using the following command:
# net ads testjoin Join is OK
- Execute the following command to display the machine account’s LDAP object
# net ads status -P objectClass: top objectClass: person objectClass: organizationalPerson objectClass: user objectClass: computer cn: rhs-smb distinguishedName: CN=rhs-smb,CN=Computers,DC=addom,DC=example,DC=com instanceType: 4 whenCreated: 20150922013713.0Z whenChanged: 20151126111120.0Z displayName: RHS-SMB$ uSNCreated: 221763 uSNChanged: 324438 name: rhs-smb objectGUID: a178177e-4aa4-4abc-9079-d1577e137723 userAccountControl: 69632 badPwdCount: 0 codePage: 0 countryCode: 0 badPasswordTime: 130880426605312806 lastLogoff: 0 lastLogon: 130930100623392945 localPolicyFlags: 0 pwdLastSet: 130930098809021309 primaryGroupID: 515 objectSid: S-1-5-21-2562125317-1564930587-1029132327-1196 accountExpires: 9223372036854775807 logonCount: 1821 sAMAccountName: rhs-smb$ sAMAccountType: 805306369 dNSHostName: rhs-smb.addom.example.com servicePrincipalName: HOST/rhs-smb.addom.example.com servicePrincipalName: HOST/RHS-SMB objectCategory: CN=Computer,CN=Schema,CN=Configuration,DC=addom,DC=example,DC=com isCriticalSystemObject: FALSE dSCorePropagationData: 16010101000000.0Z lastLogonTimestamp: 130929563322279307 msDS-SupportedEncryptionTypes: 31
- Execute the following command to display general information about the AD server:
# net ads info LDAP server: 10.11.12.1 LDAP server name: dc1.addom.example.com Realm: ADDOM.EXAMPLE.COM Bind Path: dc=ADDOM,dc=EXAMPLE,dc=COM LDAP port: 389 Server time: Thu, 26 Nov 2015 11:15:04 UTC KDC server: 10.11.12.1 Server time offset: -26
- Verify if winbind is operating correctly by executing the following stepsExecute the following command to verify if winbindd can use the machine account for authentication to AD
# wbinfo -t checking the trust secret for domain ADDOM via RPC calls succeeded
- Execute the following command to resolve the given name to a Windows SID
# wbinfo --name-to-sid 'ADDOM\Administrator' S-1-5-21-2562125317-1564930587-1029132327-500 SID_USER (1)
- Execute the following command to verify authentication:
# wbinfo -a 'ADDOM\user' Enter ADDOM\user's password: plaintext password authentication succeeded Enter ADDOM\user's password: challenge/response password authentication succeededor,
# wbinfo -a 'ADDOM\user%password' plaintext password authentication succeeded challenge/response password authentication succeeded
- Execute the following command to verify if the id-mapping is working properly:
# wbinfo --sid-to-uid <SID-OF-ADMIN> 1000000
- Execute the following command to verify if the winbind Name Service Switch module works correctly:
# getent passwd 'ADDOM\Administrator' ADDOM\administrator:*:1000000:1000004::/home/ADDOM/administrator:/bin/false
- Execute the following command to verify if samba can use winbind and the NSS module correctly:
# smbclient -L rhs-smb -U 'ADDOM\Administrator' Domain=[ADDOM] OS=[Windows 6.1] Server=[Samba 4.2.4] Sharename Type Comment --------- ---- ------- IPC$ IPC IPC Service (Samba 4.2.4) Domain=[ADDOM] OS=[Windows 6.1] Server=[Samba 4.2.4] Server Comment --------- ------- RHS-SMB Samba 4.2.4 Workgroup Master --------- ------- ADDOM RHS-SMB