Chapter 299. SFTP Component

Available as of Camel version 1.1

This component provides access to remote file systems over the FTP and SFTP protocols.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-ftp</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

For more information you can look at FTP component

299.1. URI Options

The options below are exclusive for the FTPS component.

The SFTP component has no options.

The SFTP endpoint is configured using URI syntax:

sftp:host:port/directoryName

with the following path and query parameters:

299.1.1. Path Parameters (3 parameters):

NameDescriptionDefaultType

host

Required Hostname of the FTP server

 

String

port

Port of the FTP server

 

int

directoryName

The starting directory

 

String

299.1.2. Query Parameters (111 parameters):

NameDescriptionDefaultType

charset (common)

This option is used to specify the encoding of the file. You can use this on the consumer, to specify the encodings of the files, which allow Camel to know the charset it should load the file content in case the file content is being accessed. Likewise when writing a file, you can use this option to specify which charset to write the file as well. Do mind that when writing the file Camel may have to read the message content into memory to be able to convert the data into the configured charset, so do not use this if you have big messages.

 

String

disconnect (common)

Whether or not to disconnect from remote FTP server right after use. Disconnect will only disconnect the current connection to the FTP server. If you have a consumer which you want to stop, then you need to stop the consumer/route instead.

false

boolean

doneFileName (common)

Producer: If provided, then Camel will write a 2nd done file when the original file has been written. The done file will be empty. This option configures what file name to use. Either you can specify a fixed name. Or you can use dynamic placeholders. The done file will always be written in the same folder as the original file. Consumer: If provided, Camel will only consume files if a done file exists. This option configures what file name to use. Either you can specify a fixed name. Or you can use dynamic placeholders.The done file is always expected in the same folder as the original file. Only $file.name and $file.name.noext is supported as dynamic placeholders.

 

String

fileName (common)

Use Expression such as File Language to dynamically set the filename. For consumers, it’s used as a filename filter. For producers, it’s used to evaluate the filename to write. If an expression is set, it take precedence over the CamelFileName header. (Note: The header itself can also be an Expression). The expression options support both String and Expression types. If the expression is a String type, it is always evaluated using the File Language. If the expression is an Expression type, the specified Expression type is used - this allows you, for instance, to use OGNL expressions. For the consumer, you can use it to filter filenames, so you can for instance consume today’s file using the File Language syntax: mydata-$date:now:yyyyMMdd.txt. The producers support the CamelOverruleFileName header which takes precedence over any existing CamelFileName header; the CamelOverruleFileName is a header that is used only once, and makes it easier as this avoids to temporary store CamelFileName and have to restore it afterwards.

 

String

jschLoggingLevel (common)

The logging level to use for JSCH activity logging. As JSCH is verbose at by default at INFO level the threshold is WARN by default.

WARN

LoggingLevel

separator (common)

Sets the path separator to be used. UNIX = Uses unix style path separator Windows = Uses windows style path separator Auto = (is default) Use existing path separator in file name

UNIX

PathSeparator

fastExistsCheck (common)

If set this option to be true, camel-ftp will use the list file directly to check if the file exists. Since some FTP server may not support to list the file directly, if the option is false, camel-ftp will use the old way to list the directory and check if the file exists. This option also influences readLock=changed to control whether it performs a fast check to update file information or not. This can be used to speed up the process if the FTP server has a lot of files.

false

boolean

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

delete (consumer)

If true, the file will be deleted after it is processed successfully.

false

boolean

moveFailed (consumer)

Sets the move failure expression based on Simple language. For example, to move files into a .error subdirectory use: .error. Note: When moving the files to the fail location Camel will handle the error and will not pick up the file again.

 

String

noop (consumer)

If true, the file is not moved or deleted in any way. This option is good for readonly data, or for ETL type requirements. If noop=true, Camel will set idempotent=true as well, to avoid consuming the same files over and over again.

false

boolean

preMove (consumer)

Expression (such as File Language) used to dynamically set the filename when moving it before processing. For example to move in-progress files into the order directory set this value to order.

 

String

preSort (consumer)

When pre-sort is enabled then the consumer will sort the file and directory names during polling, that was retrieved from the file system. You may want to do this in case you need to operate on the files in a sorted order. The pre-sort is executed before the consumer starts to filter, and accept files to process by Camel. This option is default=false meaning disabled.

false

boolean

recursive (consumer)

If a directory, will look for files in all the sub-directories as well.

false

boolean

sendEmptyMessageWhenIdle (consumer)

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

boolean

streamDownload (consumer)

Sets the download method to use when not using a local working directory. If set to true, the remote files are streamed to the route as they are read. When set to false, the remote files are loaded into memory before being sent into the route.

false

boolean

directoryMustExist (consumer)

Similar to startingDirectoryMustExist but this applies during polling recursive sub directories.

false

boolean

download (consumer)

Whether the FTP consumer should download the file. If this option is set to false, then the message body will be null, but the consumer will still trigger a Camel Exchange that has details about the file such as file name, file size, etc. It’s just that the file will not be downloaded.

false

boolean

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this options is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

 

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange.

 

ExchangePattern

ignoreFileNotFoundOr PermissionError (consumer)

Whether to ignore when (trying to list files in directories or when downloading a file), which does not exist or due to permission error. By default when a directory or file does not exists or insufficient permission, then an exception is thrown. Setting this option to true allows to ignore that instead.

false

boolean

inProgressRepository (consumer)

A pluggable in-progress repository org.apache.camel.spi.IdempotentRepository. The in-progress repository is used to account the current in progress files being consumed. By default a memory based repository is used.

 

String>

localWorkDirectory (consumer)

When consuming, a local work directory can be used to store the remote file content directly in local files, to avoid loading the content into memory. This is beneficial, if you consume a very big remote file and thus can conserve memory.

 

String

onCompletionException Handler (consumer)

To use a custom org.apache.camel.spi.ExceptionHandler to handle any thrown exceptions that happens during the file on completion process where the consumer does either a commit or rollback. The default implementation will log any exception at WARN level and ignore.

 

ExceptionHandler

pollStrategy (consumer)

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

 

PollingConsumerPoll Strategy

processStrategy (consumer)

A pluggable org.apache.camel.component.file.GenericFileProcessStrategy allowing you to implement your own readLock option or similar. Can also be used when special conditions must be met before a file can be consumed, such as a special ready file exists. If this option is set then the readLock option does not apply.

 

GenericFileProcess Strategy<T>

startingDirectoryMustExist (consumer)

Whether the starting directory must exist. Mind that the autoCreate option is default enabled, which means the starting directory is normally auto created if it doesn’t exist. You can disable autoCreate and enable this to ensure the starting directory must exist. Will thrown an exception if the directory doesn’t exist.

false

boolean

useList (consumer)

Whether to allow using LIST command when downloading a file. Default is true. In some use cases you may want to download a specific file and are not allowed to use the LIST command, and therefore you can set this option to false. Notice when using this option, then the specific file to download does not include meta-data information such as file size, timestamp, permissions etc, because those information is only possible to retrieve when LIST command is in use.

true

boolean

fileExist (producer)

What to do if a file already exists with the same name. Override, which is the default, replaces the existing file. Append - adds content to the existing file. Fail - throws a GenericFileOperationException, indicating that there is already an existing file. Ignore - silently ignores the problem and does not override the existing file, but assumes everything is okay. Move - option requires to use the moveExisting option to be configured as well. The option eagerDeleteTargetFile can be used to control what to do if an moving the file, and there exists already an existing file, otherwise causing the move operation to fail. The Move option will move any existing files, before writing the target file. TryRename is only applicable if tempFileName option is in use. This allows to try renaming the file from the temporary name to the actual name, without doing any exists check. This check may be faster on some file systems and especially FTP servers.

Override

GenericFileExist

flatten (producer)

Flatten is used to flatten the file name path to strip any leading paths, so it’s just the file name. This allows you to consume recursively into sub-directories, but when you eg write the files to another directory they will be written in a single directory. Setting this to true on the producer enforces that any file name in CamelFileName header will be stripped for any leading paths.

false

boolean

moveExisting (producer)

Expression (such as File Language) used to compute file name to use when fileExist=Move is configured. To move files into a backup subdirectory just enter backup. This option only supports the following File Language tokens: file:name, file:name.ext, file:name.noext, file:onlyname, file:onlyname.noext, file:ext, and file:parent. Notice the file:parent is not supported by the FTP component, as the FTP component can only move any existing files to a relative directory based on current dir as base.

 

String

tempFileName (producer)

The same as tempPrefix option but offering a more fine grained control on the naming of the temporary filename as it uses the File Language.

 

String

tempPrefix (producer)

This option is used to write the file using a temporary name and then, after the write is complete, rename it to the real name. Can be used to identify files being written and also avoid consumers (not using exclusive read locks) reading in progress files. Is often used by FTP when uploading big files.

 

String

allowNullBody (producer)

Used to specify if a null body is allowed during file writing. If set to true then an empty file will be created, when set to false, and attempting to send a null body to the file component, a GenericFileWriteException of 'Cannot write null body to file.' will be thrown. If the fileExist option is set to 'Override', then the file will be truncated, and if set to append the file will remain unchanged.

false

boolean

chmod (producer)

Allows you to set chmod on the stored file. For example chmod=640.

 

String

disconnectOnBatchComplete (producer)

Whether or not to disconnect from remote FTP server right after a Batch upload is complete. disconnectOnBatchComplete will only disconnect the current connection to the FTP server.

false

boolean

eagerDeleteTargetFile (producer)

Whether or not to eagerly delete any existing target file. This option only applies when you use fileExists=Override and the tempFileName option as well. You can use this to disable (set it to false) deleting the target file before the temp file is written. For example you may write big files and want the target file to exists during the temp file is being written. This ensure the target file is only deleted until the very last moment, just before the temp file is being renamed to the target filename. This option is also used to control whether to delete any existing files when fileExist=Move is enabled, and an existing file exists. If this option copyAndDeleteOnRenameFails false, then an exception will be thrown if an existing file existed, if its true, then the existing file is deleted before the move operation.

true

boolean

keepLastModified (producer)

Will keep the last modified timestamp from the source file (if any). Will use the Exchange.FILE_LAST_MODIFIED header to located the timestamp. This header can contain either a java.util.Date or long with the timestamp. If the timestamp exists and the option is enabled it will set this timestamp on the written file. Note: This option only applies to the file producer. You cannot use this option with any of the ftp producers.

false

boolean

sendNoop (producer)

Whether to send a noop command as a pre-write check before uploading files to the FTP server. This is enabled by default as a validation of the connection is still valid, which allows to silently re-connect to be able to upload the file. However if this causes problems, you can turn this option off.

true

boolean

autoCreate (advanced)

Automatically create missing directories in the file’s pathname. For the file consumer, that means creating the starting directory. For the file producer, it means the directory the files should be written to.

true

boolean

bufferSize (advanced)

Write buffer sized in bytes.

131072

int

bulkRequests (advanced)

Specifies how many requests may be outstanding at any one time. Increasing this value may slightly improve file transfer speed but will increase memory usage.

 

Integer

compression (advanced)

To use compression. Specify a level from 1 to 10. Important: You must manually add the needed JSCH zlib JAR to the classpath for compression support.

 

int

connectTimeout (advanced)

Sets the connect timeout for waiting for a connection to be established Used by both FTPClient and JSCH

10000

int

maximumReconnectAttempts (advanced)

Specifies the maximum reconnect attempts Camel performs when it tries to connect to the remote FTP server. Use 0 to disable this behavior.

 

int

proxy (advanced)

To use a custom configured com.jcraft.jsch.Proxy. This proxy is used to consume/send messages from the target SFTP host.

 

Proxy

reconnectDelay (advanced)

Delay in millis Camel will wait before performing a reconnect attempt.

 

long

serverAliveCountMax (advanced)

Allows you to set the serverAliveCountMax of the sftp session

1

int

serverAliveInterval (advanced)

Allows you to set the serverAliveInterval of the sftp session

 

int

soTimeout (advanced)

Sets the so timeout FTP and FTPS Only for Camel 2.4. SFTP for Camel 2.14.3/2.15.3/2.16 onwards. Is the SocketOptions.SO_TIMEOUT value in millis. Recommended option is to set this to 300000 so as not have a hanged connection. On SFTP this option is set as timeout on the JSCH Session instance.

300000

int

stepwise (advanced)

Sets whether we should stepwise change directories while traversing file structures when downloading files, or as well when uploading a file to a directory. You can disable this if you for example are in a situation where you cannot change directory on the FTP server due security reasons.

true

boolean

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

throwExceptionOnConnect Failed (advanced)

Should an exception be thrown if connection failed (exhausted) By default exception is not thrown and a WARN is logged. You can use this to enable exception being thrown and handle the thrown exception from the org.apache.camel.spi.PollingConsumerPollStrategy rollback method.

false

boolean

timeout (advanced)

Sets the data timeout for waiting for reply Used only by FTPClient

30000

int

antExclude (filter)

Ant style filter exclusion. If both antInclude and antExclude are used, antExclude takes precedence over antInclude. Multiple exclusions may be specified in comma-delimited format.

 

String

antFilterCaseSensitive (filter)

Sets case sensitive flag on ant filter

true

boolean

antInclude (filter)

Ant style filter inclusion. Multiple inclusions may be specified in comma-delimited format.

 

String

eagerMaxMessagesPerPoll (filter)

Allows for controlling whether the limit from maxMessagesPerPoll is eager or not. If eager then the limit is during the scanning of files. Where as false would scan all files, and then perform sorting. Setting this option to false allows for sorting all files first, and then limit the poll. Mind that this requires a higher memory usage as all file details are in memory to perform the sorting.

true

boolean

exclude (filter)

Is used to exclude files, if filename matches the regex pattern (matching is case in-senstive). Notice if you use symbols such as plus sign and others you would need to configure this using the RAW() syntax if configuring this as an endpoint uri. See more details at configuring endpoint uris

 

String

filter (filter)

Pluggable filter as a org.apache.camel.component.file.GenericFileFilter class. Will skip files if filter returns false in its accept() method.

 

GenericFileFilter<T>

filterDirectory (filter)

Filters the directory based on Simple language. For example to filter on current date, you can use a simple date pattern such as $date:now:yyyMMdd

 

String

filterFile (filter)

Filters the file based on Simple language. For example to filter on file size, you can use $file:size 5000

 

String

idempotent (filter)

Option to use the Idempotent Consumer EIP pattern to let Camel skip already processed files. Will by default use a memory based LRUCache that holds 1000 entries. If noop=true then idempotent will be enabled as well to avoid consuming the same files over and over again.

false

Boolean

idempotentKey (filter)

To use a custom idempotent key. By default the absolute path of the file is used. You can use the File Language, for example to use the file name and file size, you can do: idempotentKey=$file:name-$file:size

 

String

idempotentRepository (filter)

A pluggable repository org.apache.camel.spi.IdempotentRepository which by default use MemoryMessageIdRepository if none is specified and idempotent is true.

 

String>

include (filter)

Is used to include files, if filename matches the regex pattern (matching is case in-sensitive). Notice if you use symbols such as plus sign and others you would need to configure this using the RAW() syntax if configuring this as an endpoint uri. See more details at configuring endpoint uris

 

String

maxDepth (filter)

The maximum depth to traverse when recursively processing a directory.

2147483647

int

maxMessagesPerPoll (filter)

To define a maximum messages to gather per poll. By default no maximum is set. Can be used to set a limit of e.g. 1000 to avoid when starting up the server that there are thousands of files. Set a value of 0 or negative to disabled it. Notice: If this option is in use then the File and FTP components will limit before any sorting. For example if you have 100000 files and use maxMessagesPerPoll=500, then only the first 500 files will be picked up, and then sorted. You can use the eagerMaxMessagesPerPoll option and set this to false to allow to scan all files first and then sort afterwards.

 

int

minDepth (filter)

The minimum depth to start processing when recursively processing a directory. Using minDepth=1 means the base directory. Using minDepth=2 means the first sub directory.

 

int

move (filter)

Expression (such as Simple Language) used to dynamically set the filename when moving it after processing. To move files into a .done subdirectory just enter .done.

 

String

exclusiveReadLockStrategy (lock)

Pluggable read-lock as a org.apache.camel.component.file.GenericFileExclusiveReadLockStrategy implementation.

 

GenericFileExclusive ReadLockStrategy<T>

readLock (lock)

Used by consumer, to only poll the files if it has exclusive read-lock on the file (i.e. the file is not in-progress or being written). Camel will wait until the file lock is granted. This option provides the build in strategies: none - No read lock is in use markerFile - Camel creates a marker file (fileName.camelLock) and then holds a lock on it. This option is not available for the FTP component changed - Changed is using file length/modification timestamp to detect whether the file is currently being copied or not. Will at least use 1 sec to determine this, so this option cannot consume files as fast as the others, but can be more reliable as the JDK IO API cannot always determine whether a file is currently being used by another process. The option readLockCheckInterval can be used to set the check frequency. fileLock - is for using java.nio.channels.FileLock. This option is not avail for the FTP component. This approach should be avoided when accessing a remote file system via a mount/share unless that file system supports distributed file locks. rename - rename is for using a try to rename the file as a test if we can get exclusive read-lock. idempotent - (only for file component) idempotent is for using a idempotentRepository as the read-lock. This allows to use read locks that supports clustering if the idempotent repository implementation supports that. idempotent-changed - (only for file component) idempotent-changed is for using a idempotentRepository and changed as the combined read-lock. This allows to use read locks that supports clustering if the idempotent repository implementation supports that. idempotent-rename - (only for file component) idempotent-rename is for using a idempotentRepository and rename as the combined read-lock. This allows to use read locks that supports clustering if the idempotent repository implementation supports that. Notice: The various read locks is not all suited to work in clustered mode, where concurrent consumers on different nodes is competing for the same files on a shared file system. The markerFile using a close to atomic operation to create the empty marker file, but its not guaranteed to work in a cluster. The fileLock may work better but then the file system need to support distributed file locks, and so on. Using the idempotent read lock can support clustering if the idempotent repository supports clustering, such as Hazelcast Component or Infinispan.

none

String

readLockCheckInterval (lock)

Interval in millis for the read-lock, if supported by the read lock. This interval is used for sleeping between attempts to acquire the read lock. For example when using the changed read lock, you can set a higher interval period to cater for slow writes. The default of 1 sec. may be too fast if the producer is very slow writing the file. Notice: For FTP the default readLockCheckInterval is 5000. The readLockTimeout value must be higher than readLockCheckInterval, but a rule of thumb is to have a timeout that is at least 2 or more times higher than the readLockCheckInterval. This is needed to ensure that amble time is allowed for the read lock process to try to grab the lock before the timeout was hit.

1000

long

readLockDeleteOrphanLock Files (lock)

Whether or not read lock with marker files should upon startup delete any orphan read lock files, which may have been left on the file system, if Camel was not properly shutdown (such as a JVM crash). If turning this option to false then any orphaned lock file will cause Camel to not attempt to pickup that file, this could also be due another node is concurrently reading files from the same shared directory.

true

boolean

readLockLoggingLevel (lock)

Logging level used when a read lock could not be acquired. By default a WARN is logged. You can change this level, for example to OFF to not have any logging. This option is only applicable for readLock of types: changed, fileLock, idempotent, idempotent-changed, idempotent-rename, rename.

DEBUG

LoggingLevel

readLockMarkerFile (lock)

Whether to use marker file with the changed, rename, or exclusive read lock types. By default a marker file is used as well to guard against other processes picking up the same files. This behavior can be turned off by setting this option to false. For example if you do not want to write marker files to the file systems by the Camel application.

true

boolean

readLockMinAge (lock)

This option applied only for readLock=change. This option allows to specify a minimum age the file must be before attempting to acquire the read lock. For example use readLockMinAge=300s to require the file is at last 5 minutes old. This can speedup the changed read lock as it will only attempt to acquire files which are at least that given age.

0

long

readLockMinLength (lock)

This option applied only for readLock=changed. This option allows you to configure a minimum file length. By default Camel expects the file to contain data, and thus the default value is 1. You can set this option to zero, to allow consuming zero-length files.

1

long

readLockRemoveOnCommit (lock)

This option applied only for readLock=idempotent. This option allows to specify whether to remove the file name entry from the idempotent repository when processing the file is succeeded and a commit happens. By default the file is not removed which ensures that any race-condition do not occur so another active node may attempt to grab the file. Instead the idempotent repository may support eviction strategies that you can configure to evict the file name entry after X minutes - this ensures no problems with race conditions.

false

boolean

readLockRemoveOnRollback (lock)

This option applied only for readLock=idempotent. This option allows to specify whether to remove the file name entry from the idempotent repository when processing the file failed and a rollback happens. If this option is false, then the file name entry is confirmed (as if the file did a commit).

true

boolean

readLockTimeout (lock)

Optional timeout in millis for the read-lock, if supported by the read-lock. If the read-lock could not be granted and the timeout triggered, then Camel will skip the file. At next poll Camel, will try the file again, and this time maybe the read-lock could be granted. Use a value of 0 or lower to indicate forever. Currently fileLock, changed and rename support the timeout. Notice: For FTP the default readLockTimeout value is 20000 instead of 10000. The readLockTimeout value must be higher than readLockCheckInterval, but a rule of thumb is to have a timeout that is at least 2 or more times higher than the readLockCheckInterval. This is needed to ensure that amble time is allowed for the read lock process to try to grab the lock before the timeout was hit.

10000

long

backoffErrorThreshold (scheduler)

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

 

int

backoffIdleThreshold (scheduler)

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

 

int

backoffMultiplier (scheduler)

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

 

int

delay (scheduler)

Milliseconds before the next poll. You can also specify time values using units, such as 60s (60 seconds), 5m30s (5 minutes and 30 seconds), and 1h (1 hour).

500

long

greedy (scheduler)

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

boolean

initialDelay (scheduler)

Milliseconds before the first poll starts. You can also specify time values using units, such as 60s (60 seconds), 5m30s (5 minutes and 30 seconds), and 1h (1 hour).

1000

long

runLoggingLevel (scheduler)

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that.

TRACE

LoggingLevel

scheduledExecutorService (scheduler)

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

 

ScheduledExecutor Service

scheduler (scheduler)

To use a cron scheduler from either camel-spring or camel-quartz2 component

none

ScheduledPollConsumer Scheduler

schedulerProperties (scheduler)

To configure additional properties when using a custom scheduler or any of the Quartz2, Spring based scheduler.

 

Map

startScheduler (scheduler)

Whether the scheduler should be auto started.

true

boolean

timeUnit (scheduler)

Time unit for initialDelay and delay options.

MILLISECONDS

TimeUnit

useFixedDelay (scheduler)

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

boolean

shuffle (sort)

To shuffle the list of files (sort in random order)

false

boolean

sortBy (sort)

Built-in sort by using the File Language. Supports nested sorts, so you can have a sort by file name and as a 2nd group sort by modified date.

 

String

sorter (sort)

Pluggable sorter as a java.util.Comparator class.

 

GenericFile<T>>

ciphers (security)

Set a comma separated list of ciphers that will be used in order of preference. Possible cipher names are defined by JCraft JSCH. Some examples include: aes128-ctr,aes128-cbc,3des-ctr,3des-cbc,blowfish-cbc,aes192-cbc,aes256-cbc. If not specified the default list from JSCH will be used.

 

String

keyPair (security)

Sets a key pair of the public and private key so to that the SFTP endpoint can do public/private key verification.

 

KeyPair

knownHosts (security)

Sets the known_hosts from the byte array, so that the SFTP endpoint can do host key verification.

 

byte[]

knownHostsFile (security)

Sets the known_hosts file, so that the SFTP endpoint can do host key verification.

 

String

knownHostsUri (security)

Sets the known_hosts file (loaded from classpath by default), so that the SFTP endpoint can do host key verification.

 

String

password (security)

Password to use for login

 

String

preferredAuthentications (security)

Set the preferred authentications which SFTP endpoint will used. Some example include:password,publickey. If not specified the default list from JSCH will be used.

 

String

privateKey (security)

Set the private key as byte so that the SFTP endpoint can do private key verification.

 

byte[]

privateKeyFile (security)

Set the private key file so that the SFTP endpoint can do private key verification.

 

String

privateKeyPassphrase (security)

Set the private key file passphrase so that the SFTP endpoint can do private key verification.

 

String

privateKeyUri (security)

Set the private key file (loaded from classpath by default) so that the SFTP endpoint can do private key verification.

 

String

strictHostKeyChecking (security)

Sets whether to use strict host key checking.

no

String

username (security)

Username to use for login

 

String

useUserKnownHostsFile (security)

If knownHostFile has not been explicit configured then use the host file from System.getProperty(user.home)/.ssh/known_hosts

true

boolean