Language:
Format:

Red Hat Training

A Red Hat training course is available for Red Hat Fuse

Getting Started

Red Hat Fuse 7.3

Get started quickly with Red Hat Fuse!

Fuse Documentation Team fuse-docs-support@redhat.com

Abstract

Get started with Fuse on Spring Boot, Fuse on Apache Karaf, Fuse on JBoss Enterprise Application Platform, and Fuse on JBoss Web Server

Chapter 1. Getting Started Dashboard

1.1. Alternatives for getting started with Fuse standalone

The following dashboard shows alternative paths for getting started with Fuse standalone, depending on which container type you prefer:

1.2. Overview of the Fuse containers

To help you choose the right container for your project, the following sections give a brief overview of each container type.

1.2.1. JBoss EAP

JBoss Enterprise Application Platform (EAP), based on Jakarta EE (previously, Java EE) technology from the Eclipse Foundation, was originally created to address the use cases for developing enterprise applications. Characterized by well-defined patterns for implementing services and standardized Java APIs (for accessing services such as persistence, messaging, security, and so on), in recent years this technology has evolved to be more lightweight, with the introduction of CDI for dependency injection and simplified annotations for enterprise Java beans.

Distinctive features of this container technology are:

Particularly suited to running in standalone mode.
Many standard services (for example, persistence, messaging, security, and so on) pre-configured and provided out of the box.
Application WARs typically small and lightweight (since many dependencies are pre-installed in the container).
Standardized, backward-compatible Java APIs.

1.2.2. Apache Karaf

Apache Karaf is based on the OSGi standard from the OSGi Alliance. OSGi originated in the telecommunications industry, where it was used to develop gateway servers that could be upgraded on the fly, without needing to shut down the server (a feature known as hot code swapping). Subsequently, OSGi container technology has found a variety of other uses and is popular for modularised applications (for example, the Eclipse IDE).

Distinctive features of this container technology are:

Particularly suited to running in standalone mode.
Strong support for modularisation (OSGi bundles), with sophisticated class-loading support.
Multiple versions of a dependency can be deployed side by side in a container (but this requires some care in practice).
Hot code swapping, enabling you to upgrade or replace a module without shutting down the container. This is a unique feature, but requires significant effort to make it work properly.

1.2.3. Spring Boot

Spring Boot is a recent evolution of the well-known Spring container. A distinctive quality of the Spring Boot container is that container functionality is divided up into small chunks, which can be deployed independently. This enables you to deploy a container with a small footprint, specialized for a particular kind of service, and this happens to be exactly what you need to fit the paradigm of a microservices architecture.

Distinctive features of this container technology are:

Particularly suited to running on a scalable cloud platform (Kubernetes and OpenShift).
Small footprint (ideal for microservices architecture).
Optimized for convention over configuration.
No application server required. You can run a Spring Boot application Jar directly in a JVM.

Chapter 2. Getting Started with Spring Boot

2.1. Overview of the circuit breaker booster

The Netflix/Hystrix circuit breaker enables distributed applications to cope with interruptions to network connectivity and temporary unavailability of backend services. The basic idea of the circuit breaker pattern is that the loss of a dependent service is detected automatically and an alternative behavior can be programmed, in case the backend service is temporarily unavailable.

The Fuse circuit breaker booster consists of two related services:

A name service, the backend service that returns a name to greet.
A greetings service, the frontend service that invokes the name service to get a name and then returns the string, Hello, NAME.

In this booster demonstration, the Hystrix circuit breaker is inserted between the greetings service and the name service. If the backend name service becomes unavailable, the greetings service can fall back to an alternative behavior and respond to the client immediately, instead of being blocked while it waits for the name service to restart.

2.2. Prerequisites

To build and run the booster demonstration, install the following prerequisites:

A supported version of the Java Developer Kit (JDK). See the Supported Configurations page for details.
Apache Maven 3.3.x or later. See the Maven Download page. To learn more about Maven, see Appendix A, Preparing to use Maven.

2.3. Generate the booster project

To generate the circuit breaker booster project, perform the following steps:

Navigate to https://developers.redhat.com/launch.
Click START.
The launcher wizard prompts you to log in to your Red Hat account.
Click the Log in or register button and then log in.
On the Launcher page, click the Deploy an Example Application button.
On the Create Example Application page, type the name, fuse-circuit-breaker, in the Create Example Application as field.
Click Select an Example.
In the Example dialog, select the Circuit Breaker option. A Select a Runtime dropdown menu appears.
1. From the Select a Runtime dropdown, select Fuse.
2. From the version dropdown menu, select 7.3.0 (Red Hat Fuse) (do not select the 2.21.2 (Community) version).
3. Click Save.
On the Create Example Application page, click Download.
When you see the Your Application is Ready dialog, click Download.zip. Your browser downloads the generated booster project (packaged as a ZIP file).
Use an archive utility to extract the generated project to a convenient location on your local file system.

2.4. Build and run the booster

To build and run the booster project, perform the following steps:

Open a shell prompt and build the project from the command line, using Maven:
```
cd fuse-circuit-breaker
```
```
mvn clean package
```
After Maven builds the project, it displays a Build Success message.

Open a new shell prompt and start the name service, as follows:

cd name-service

mvn spring-boot:run -DskipTests -Dserver.port=8081

As Spring Boot starts up, you should see output similar to the following:

...
2019-05-06 20:19:59.401  INFO 9553 --- [           main] o.a.camel.spring.SpringCamelContext      : Route: route1 started and consuming from: servlet:/name?httpMethodRestrict=GET
2019-05-06 20:19:59.402  INFO 9553 --- [           main] o.a.camel.spring.SpringCamelContext      : Total 1 routes, of which 1 are started
2019-05-06 20:19:59.403  INFO 9553 --- [           main] o.a.camel.spring.SpringCamelContext      : Apache Camel 2.21.0.fuse-730078-redhat-00001 (CamelContext: camel-1) started in 0.287 seconds
2019-05-06 20:19:59.406  INFO 9553 --- [           main] o.a.c.c.s.CamelHttpTransportServlet      : Initialized CamelHttpTransportServlet[name=CamelServlet, contextPath=]
2019-05-06 20:19:59.473  INFO 9553 --- [           main] b.c.e.u.UndertowEmbeddedServletContainer : Undertow started on port(s) 8081 (http)
2019-05-06 20:19:59.479  INFO 9553 --- [           main] com.redhat.fuse.boosters.cb.Application  : Started Application in 5.485 seconds (JVM running for 9.841)

Open a new shell prompt and start the greetings service, as follows:

cd greetings-service

mvn spring-boot:run -DskipTests

As Spring Boot starts up, you should see output similar to the following:

...
2019-05-06 20:22:19.051  INFO 9729 --- [           main] o.a.c.c.s.CamelHttpTransportServlet      : Initialized CamelHttpTransportServlet[name=CamelServlet, contextPath=]
2019-05-06 20:22:19.115  INFO 9729 --- [           main] b.c.e.u.UndertowEmbeddedServletContainer : Undertow started on port(s) 8080 (http)
2019-05-06 20:22:19.123  INFO 9729 --- [           main] com.redhat.fuse.boosters.cb.Application  : Started Application in 7.68 seconds (JVM running for 12.66)

The greetings service exposes a REST endpoint at the http://localhost:8080/camel/greetings URL.

Invoke the REST endpoint by either opening the URL in a web browser or by opening another shell prompt and typing the following curl command:
```
curl http://localhost:8080/camel/greetings
```
Here is the response:
```
{"greetings":"Hello, Jacopo"}
```
To demonstrate the circuit breaker functionality provided by Camel Hystrix, kill the backend name service by typing Ctrl-C in the shell prompt window where the name service is running.
Now that the name service is unavailable, the circuit breaker kicks in to prevent the greetings service from hanging when it is invoked.

Invoke the greetings REST endpoint by either opening http://localhost:8080/camel/greetings in a web browser or by typing the following curl command in another shell prompt window:

curl http://localhost:8080/camel/greetings

Here is the response:

{"greetings":"Hello, default fallback"}

In the window where the greetings service is running, the log shows the following sequence of messages:

2019-05-06 20:24:16.952  INFO 9729 --- [-CamelHystrix-2] route2                                   :  Try to call name Service
2019-05-06 20:24:16.956  INFO 9729 --- [-CamelHystrix-2] o.a.c.httpclient.HttpMethodDirector      : I/O exception (java.net.ConnectException) caught when processing request: Connection refused (Connection refused)
2019-05-06 20:24:16.956  INFO 9729 --- [-CamelHystrix-2] o.a.c.httpclient.HttpMethodDirector      : Retrying request
2019-05-06 20:24:16.957  INFO 9729 --- [-CamelHystrix-2] o.a.c.httpclient.HttpMethodDirector      : I/O exception (java.net.ConnectException) caught when processing request: Connection refused (Connection refused)
2019-05-06 20:24:16.957  INFO 9729 --- [-CamelHystrix-2] o.a.c.httpclient.HttpMethodDirector      : Retrying request
2019-05-06 20:24:16.957  INFO 9729 --- [-CamelHystrix-2] o.a.c.httpclient.HttpMethodDirector      : I/O exception (java.net.ConnectException) caught when processing request: Connection refused (Connection refused)
2019-05-06 20:24:16.957  INFO 9729 --- [-CamelHystrix-2] o.a.c.httpclient.HttpMethodDirector      : Retrying request
2019-05-06 20:24:16.964  INFO 9729 --- [-CamelHystrix-2] route2                                   :  We are falling back!!!!

For more information about this example, open the Circuit Breaker - Red Hat Fuse page at http://localhost:8080/ (while the greetings-service is running). This page includes a link to the Hystrix dashboard that monitors the state of the circuit breaker.

Chapter 3. Getting Started with Apache Karaf

3.2. Download the required packages

Click each of the Download buttons to get the required packages from the Customer Portal:

get started with fuse on karaf

3.3. Install and configure Fuse on Apache Karaf

To install and configure Fuse on Apache Karaf, perform the following steps:

Unpack the downloaded .zip archive file for Fuse on Apache Karaf to a convenient location on your file system, FUSE_INSTALL.
Add an administrator user to the Fuse runtime.
1. Open the FUSE_INSTALL/etc/users.properties file in a text editor.
2. Delete the # character at the start of the line that starts with #admin = admin.
3. Delete the # character at the start of the line that starts with #g\:admingroup.
4. Customize the username, USERNAME, and password, PASSWORD, of the user entry, so that you have a user entry and an admin group entry like the following (on consecutive lines):
```
USERNAME = PASSWORD,_g_:admingroup
_g_\:admingroup = group,admin,manager,viewer,systembundles,ssh
```
5. Save the etc/users.properties file.

3.4. Set up your development environment

To set up your development environment, perform the following steps:

Run the CodeReady Studio installer, as follows:

java -jar DOWNLOAD_LOCATION/devstudio-12.11.0.GA-installer-standalone.jar

During installation:
1. Accept the terms and conditions.
2. Choose your preferred installation path.
3. Select the Java 8 JVM.
4. At the Select Platforms and Servers step, configure the Fuse on Karaf runtime by clicking Add and browsing to the location of the FUSE_INSTALL directory (see Section 3.3, “Install and configure Fuse on Apache Karaf”).
5. At the Select Additional Features to Install step, select Red Hat Fuse Tooling.
CodeReady Studio starts up. When the Searching for runtimes dialog appears, click OK to create the Fuse on Karaf runtime.
(Optional) In order to use Apache Maven from the command line, you need to install and configure Maven as described in Appendix A, Preparing to use Maven.
Note
If you are using CodeReady Studio exclusively, it is not strictly necessary to install Maven, because CodeReady Studio has Maven pre-installed and configured for you. But if you plan to invoke Maven from the command line, it is necessary to perform this step.

3.5. Build your first application

To build your first application with Fuse on Karaf, perform the following steps:

In CodeReady Studio, create a new project, as follows:
1. Select File→New→Fuse Integration Project.
2. Enter fuse-camel-cbr in the Project Name field.
3. Click Next.
4. In the Select a Target Environment pane, choose the following settings:
  - Select Standalone as the deployment platform.
  - Select Karaf/Fuse on Karaf as the runtime environment and use the Runtime (optional) dropdown menu to select the Red Had JBoss Middleware> Red Hat Fuse 7+ Runtime server as the target runtime.
5. After selecting the target runtime, the Camel Version is automatically selected for you and the field is grayed out.
6. Click Next.
7. In the Advanced Project Setup pane, select the Beginner→Content Based Router - Blueprint DSL template.
8. Click Finish.
9. If prompted to open the associated Fuse Integration perspective, click Yes.
10. Wait while CodeReady Studio downloads required artifacts and builds the project in the background.
  Important
  If this is the first time you are building a Fuse project in CodeReady Studio, it will take several minutes for the wizard to finish generating the project, as it downloads dependencies from remote Maven repositories. Do not attempt to interrupt the wizard or close CodeReady Studio while the project is building in the background.
Deploy the project to the server, as follows:
1. In the Servers view (bottom left corner of the Fuse Integration perspective), if the server is not already started, select the fuse-karaf-7.3.0.fuse-730079-redhat-00001 Runtime Server server and click the green arrow to start it.
  Note
  If you see the dialog, Warning: The authenticity of host 'localhost' can’t be established., click Yes to connect to the server and access the Karaf console.
2. Wait until you see a message like the following in the Console view:
```
Karaf started in 1s. Bundle stats: 12 active, 12 total
```
3. After the server has started, switch back to the Servers view, right-click on the server and select Add and Remove from the context menu.
4. In the Add and Remove dialog, select the fuse-camel-cbr project and click the Add > button.
5. Click Finish.
6. You can check whether the project’s OSGi bundle has started up by going to the Terminal view and entering bundle:list | tail. You should see some output like the following:
```
...
228 │ Active │  80 │ 1.0.0.201505202023          │ org.osgi:org.osgi.service.j
232 │ Active │  80 │ 1.0.0.SNAPSHOT              │ Fuse CBR Quickstart
```

3.5.1. Verify the project

As soon as the Camel route starts up, it will create a directory, work/cbr/input in the fuse-camel-cbr project.

Now you can test your Camel route and see it in action.

In the Project Explorer view, click Refresh to see the newly created work/cbr/input directory.
Copy the files you find in the project’s src/main/data directory to the work/cbr/input directory.
Wait a few moments and then refresh the Project Explorer view again to see the same files organized by country under the work/cbr/output directory:
order1.xml in work/cbr/output/others
order2.xml and order4.xml in work/cbr/output/uk
order3.xml and order5.xml in work/cbr/output/us

3.5.2. Undeploy the project

Undeploy the project, as follows:

In the Servers view, select the Red Hat Fuse 7+ Runtime Server server.
Right-click on the server and select Add and Remove from the context menu.
In the Add and Remove dialog, select your fuse-camel-cbr project and click the < Remove button.
Click Finish.

Chapter 4. Getting Started with Fuse on JBoss Enterprise Application Platform

4.2. Download the required packages

Click each of the Download buttons to get the required packages from the Customer Portal:

get started with fuse on eap

4.3. Install and configure Fuse on JBoss EAP

To install and configure Fuse on JBoss EAP, perform the following steps:

Run the JBoss EAP installer from a shell prompt, as follows:
```
java -jar DOWNLOAD_LOCATION/jboss-eap-7.2.0-installer.jar
```
During installation:
1. Accept the terms and conditions.
2. Choose your preferred installation path, EAP_INSTALL, for the JBoss EAP runtime.
3. Create an administrative user and make a careful note of these administrative user credentials for later.
4. You can accept the default settings on the remaining screens.
Open a shell prompt and change directory to EAP_INSTALL.
From the EAP_INSTALL directory, run the Fuse on EAP installer, as follows:
```
java -jar DOWNLOAD_LOCATION/fuse-eap-installer-7.3.0.jar
```

4.4. Set up your development environment

To set up your development environment, perform the following steps:

Run the CodeReady Studio installer, as follows:

java -jar DOWNLOAD_LOCATION/devstudio-12.11.0.GA-installer-standalone.jar

During installation:
1. Accept the terms and conditions.
2. Choose your preferred installation path.
3. Select the Java 8 JVM.
4. At the Select Platforms and Servers step, configure the JBoss EAP runtime by clicking Add and browsing to the location of the EAP_INSTALL directory (see Section 4.3, “Install and configure Fuse on JBoss EAP”).
5. At the Select Additional Features to Install step, select Red Hat Fuse Tooling.
CodeReady Studio starts up. When the Searching for runtimes dialog appears, click OK to create the JBoss EAP runtime.
(Optional) In order to use Apache Maven from the command line, you need to install and configure Maven as described in Appendix A, Preparing to use Maven.
Note
If you are using CodeReady Studio exclusively, it is not strictly necessary to install Maven, because CodeReady Studio has Maven pre-installed and configured for you. But if you plan to invoke Maven from the command line, it is necessary to perform this step.

4.5. Build your first application

To build your first application with Fuse on JBoss EAP, perform the following steps:

In CodeReady Studio, create a new project, as follows:
1. Select File→New→Fuse Integration Project.
2. Enter eap-camel in the Project Name field.
3. Click Next.
4. In the Select a Target Environment pane, choose the following settings:
  - Select Standalone as the deployment platform.
  - Select Wildfly/Fuse on EAP as the runtime environment and use the Runtime (optional) dropdown menu to select the JBoss EAP 7.x Runtime server as the target runtime.
5. After selecting the target runtime, the Camel Version is automatically selected for you and the field is grayed out.
6. Click Next.
7. In the Advanced Project Setup pane, select the Spring Bean - Spring DSL template.
8. Click Finish.
9. If prompted to open the associated Fuse Integration perspective, click Yes.
10. Wait while CodeReady Studio downloads required artifacts and builds the project in the background.
  Important
  If this is the first time you are building a Fuse project in CodeReady Studio, it will take several minutes for the wizard to finish generating the project, as it downloads dependencies from remote Maven repositories. Do not attempt to interrupt the wizard or close CodeReady Studio while the project is building in the background.
Deploy the project to the server, as follows:
1. In the Servers view (bottom left corner of the Fuse Integration perspective), if the server is not already started, select the Red Hat JBoss EAP 7.2 Runtime server and click the green arrow to start it.
2. Wait until you see a message like the following in the Console view:
```
14:47:07,283 INFO  [org.jboss.as] (Controller Boot Thread) WFLYSRV0025: JBoss EAP 7.2.0.GA (WildFly Core 6.0.11.Final-redhat-00001) started in 13948ms - Started 495 of 680 services (326 services are lazy, passive or on-demand)
```
3. After the server has started, switch back to the Servers view, right-click on the server and select Add and Remove from the context menu.
4. In the Add and Remove dialog, select the eap-camel project and click the Add > button.
5. Click Finish.
Verify that the project is working, as follows:
1. Browse to the following URL to access the service running in the eap-camel project: http://localhost:8080/camel-test-spring?name=Kermit
2. The browser window should show the response Hello Kermit.
Undeploy the project, as follows:
1. In the Servers view, select the Red Hat JBoss EAP 7.2 Runtime server.
2. Right-click on the server and select Add and Remove from the context menu.
3. In the Add and Remove dialog, select your eap-camel project and click the < Remove button.
4. Click Finish.

Appendix A. Preparing to use Maven

A.1. Overview

This section gives a brief overview of how to prepare Maven for building Red Hat Fuse projects and introduces the concept of Maven coordinates, which are used to locate Maven artifacts.

A.2. Prerequisites

In order to build a project using Maven, you must have the following prerequisites:

Maven installation — Maven is a free, open source build tool from Apache. You can download the latest version from the Maven download page.
Network connection — whilst performing a build, Maven dynamically searches external repositories and downloads the required artifacts on the fly. By default, Maven looks for repositories that are accessed over the Internet. You can change this behavior so that Maven will prefer searching repositories that are on a local network.
Note
Maven can run in an offline mode. In offline mode Maven only looks for artifacts in its local repository.

A.3. Adding the Red Hat Maven repositories

In order to access artifacts from the Red Hat Maven repositories, you need to add them to Maven’s settings.xml file. Maven looks for your settings.xml file in the .m2 directory of the user’s home directory. If there is not a user specified settings.xml file, Maven will use the system-level settings.xml file at M2_HOME/conf/settings.xml.

To add the Red Hat repositories to Maven’s list of repositories, you can either create a new .m2/settings.xml file or modify the system-level settings. In the settings.xml file, add repository elements for the Red Hat repositories as shown in Adding the Red Hat Fuse Repositories to Maven.

Adding the Red Hat Fuse Repositories to Maven

<?xml version="1.0"?>
<settings>

  <profiles>
    <profile>
      <id>extra-repos</id>
      <activation>
        <activeByDefault>true</activeByDefault>
      </activation>
      <repositories>
       <repository>
            <id>redhat-ga-repository</id>
            <url>https://maven.repository.redhat.com/ga</url>
            <releases>
                <enabled>true</enabled>
            </releases>
            <snapshots>
                <enabled>false</enabled>
            </snapshots>
        </repository>
        <repository>
            <id>redhat-ea-repository</id>
            <url>https://maven.repository.redhat.com/earlyaccess/all</url>
            <releases>
                <enabled>true</enabled>
            </releases>
            <snapshots>
                <enabled>false</enabled>
            </snapshots>
        </repository>
        <repository>
          <id>jboss-public</id>
          <name>JBoss Public Repository Group</name>
          <url>https://repository.jboss.org/nexus/content/groups/public/</url>
        </repository>
      </repositories>
      <pluginRepositories>
        <pluginRepository>
            <id>redhat-ga-repository</id>
            <url>https://maven.repository.redhat.com/ga</url>
            <releases>
                <enabled>true</enabled>
            </releases>
            <snapshots>
                <enabled>false</enabled>
            </snapshots>
        </pluginRepository>
        <pluginRepository>
            <id>redhat-ea-repository</id>
            <url>https://maven.repository.redhat.com/earlyaccess/all</url>
            <releases>
                <enabled>true</enabled>
            </releases>
            <snapshots>
                <enabled>false</enabled>
            </snapshots>
        </pluginRepository>
        <pluginRepository>
          <id>jboss-public</id>
          <name>JBoss Public Repository Group</name>
          <url>https://repository.jboss.org/nexus/content/groups/public</url>
        </pluginRepository>
      </pluginRepositories>
    </profile>
  </profiles>

  <activeProfiles>
    <activeProfile>extra-repos</activeProfile>
  </activeProfiles>

</settings>

A.4. Artifacts

The basic building block in the Maven build system is an artifact. The output of an artifact, after performing a Maven build, is typically an archive, such as a JAR or a WAR.

A.5. Maven coordinates

A key aspect of Maven functionality is the ability to locate artifacts and manage the dependencies between them. Maven defines the location of an artifact using the system of Maven coordinates, which uniquely define the location of a particular artifact. A basic coordinate tuple has the form, {groupId, artifactId, version}. Sometimes Maven augments the basic set of coordinates with the additional coordinates, packaging and classifier. A tuple can be written with the basic coordinates, or with the additional packaging coordinate, or with the addition of both the packaging and classifier coordinates, as follows:

groupdId:artifactId:version
groupdId:artifactId:packaging:version
groupdId:artifactId:packaging:classifier:version

Each coordinate can be explained as follows:

groupdId: Defines a scope for the name of the artifact. You would typically use all or part of a package name as a group ID — for example, org.fusesource.example.
artifactId: Defines the artifact name (relative to the group ID).
version: Specifies the artifact’s version. A version number can have up to four parts: n.n.n.n, where the last part of the version number can contain non-numeric characters (for example, the last part of 1.0-SNAPSHOT is the alphanumeric substring, 0-SNAPSHOT).
packaging: Defines the packaged entity that is produced when you build the project. For OSGi projects, the packaging is bundle. The default value is jar.
classifier: Enables you to distinguish between artifacts that were built from the same POM, but have different content.

The group ID, artifact ID, packaging, and version are defined by the corresponding elements in an artifact’s POM file. For example:

<project ... >
  ...
  <groupId>org.fusesource.example</groupId>
  <artifactId>bundle-demo</artifactId>
  <packaging>bundle</packaging>
  <version>1.0-SNAPSHOT</version>
  ...
</project>

For example, to define a dependency on the preceding artifact, you could add the following dependency element to a POM:

<project ... >
  ...
  <dependencies>
    <dependency>
      <groupId>org.fusesource.example</groupId>
      <artifactId>bundle-demo</artifactId>
      <version>1.0-SNAPSHOT</version>
    </dependency>
  </dependencies>
  ...
</project>

Note

It is not necessary to specify the bundle package type in the preceding dependency, because a bundle is just a particular kind of JAR file and jar is the default Maven package type. If you do need to specify the packaging type explicitly in a dependency, however, you can use the type element.

Legal Notice

The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.

Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.

Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.

Linux® is the registered trademark of Linus Torvalds in the United States and other countries.

Java® is a registered trademark of Oracle and/or its affiliates.

XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.

MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.

Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.

The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.

All other trademarks are the property of their respective owners.

Language and Page Formatting Options

Red Hat Training

Getting Started

Get started quickly with Red Hat Fuse!

Chapter 1. Getting Started Dashboard

1.1. Alternatives for getting started with Fuse standalone

1.2. Overview of the Fuse containers

1.2.1. JBoss EAP

1.2.2. Apache Karaf

1.2.3. Spring Boot

Chapter 2. Getting Started with Spring Boot

2.1. Overview of the circuit breaker booster

2.2. Prerequisites

2.3. Generate the booster project

2.4. Build and run the booster

Chapter 3. Getting Started with Apache Karaf

3.1. Log in to the Customer Portal

3.2. Download the required packages

3.3. Install and configure Fuse on Apache Karaf

3.4. Set up your development environment

3.5. Build your first application

3.5.1. Verify the project

3.5.2. Undeploy the project

Chapter 4. Getting Started with Fuse on JBoss Enterprise Application Platform

4.1. Log in to the Customer Portal

4.2. Download the required packages

4.3. Install and configure Fuse on JBoss EAP

4.4. Set up your development environment

4.5. Build your first application

Appendix A. Preparing to use Maven

A.1. Overview

A.2. Prerequisites

A.3. Adding the Red Hat Maven repositories

A.4. Artifacts

A.5. Maven coordinates

Legal Notice

Quick Links

Help

Site Info

Related Sites

Systems Status

About

Red Hat legal and privacy links

Red Hat legal and privacy links