Appendix D. Automated Health Check (AHC) Tools Parameters
The following tables present a reference for the different parameters you can use for AHC Tools policies.
D.1. Hard drive
AHC Tools report disks's properties from:
- Regular SATA controllers or logical drives from RAID controllers
- Disks attached to a Hewlett Packard RAID Controller
Table D.1. Regular SATA Controller Parameters
Value
|
Description
|
Sample Configuration
|
Discrimination Level
|
---|---|---|---|
size
|
Size of the disk
|
('disk', 'sda', 'size', '899')
|
Medium
|
vendor
|
Vendor of the disk
|
('disk', 'sda', 'vendor', 'HP')
|
Medium
|
model
|
Model of the disk
|
('disk', 'sda', 'model', 'LOGICAL VOLUME')
|
High
|
rev
|
Firmware revision of the disk
|
('disk', 'sda', 'rev', '3.42')
|
Medium
|
WCE
|
Write Cache Enabled
|
('disk', 'sda', 'WCE', '1')
|
Low
|
RCD
|
Read Cache Disabled
|
('disk', 'sda', 'RCD, '1')
|
Low
|
Table D.2. Hewlett Packard Raid Controller Parameters
Value
|
Description
|
Sample Configuration
|
Discrimination Level
|
---|---|---|---|
size
|
Size of the raw disk
|
('disk', '1I:1:1', 'size', '300')
|
Medium
|
type
|
Type of the raw disk
|
('disk', '1I:1:1', 'type', 'SAS')
|
Low
|
slot
|
Raw disk slot's id
|
('disk', '1I:1:1', 'slot', '0')
|
Medium
|