Menu Close

Chapter 1. Introducing virtualization in RHEL

If you are unfamiliar with the concept of virtualization or its implementation in Linux, the following sections provide a general overview of virtualization in RHEL 9: its basics, advantages, components, and other possible virtualization solutions provided by Red Hat.

1.1. What is virtualization?

RHEL 9 provides the virtualization functionality, which enables a machine running RHEL 9 to host multiple virtual machines (VMs), also referred to as guests. VMs use the host’s physical hardware and computing resources to run a separate, virtualized operating system (guest OS) as a user-space process on the host’s operating system.

In other words, virtualization makes it possible to have operating systems within operating systems.

VMs enable you to safely test software configurations and features, run legacy software, or optimize the workload efficiency of your hardware. For more information on the benefits, see Advantages of virtualization.

For more information on what virtualization is, see the Red Hat Customer Portal.

Next steps

1.2. Advantages of virtualization

Using virtual machines (VMs) has the following benefits in comparison to using physical machines:

  • Flexible and fine-grained allocation of resources

    A VM runs on a host machine, which is usually physical, and physical hardware can also be assigned for the guest OS to use. However, the allocation of physical resources to the VM is done on the software level, and is therefore very flexible. A VM uses a configurable fraction of the host memory, CPUs, or storage space, and that configuration can specify very fine-grained resource requests.

    For example, what the guest OS sees as its disk can be represented as a file on the host file system, and the size of that disk is less constrained than the available sizes for physical disks.

  • Software-controlled configurations

    The entire configuration of a VM is saved as data on the host, and is under software control. Therefore, a VM can easily be created, removed, cloned, migrated, operated remotely, or connected to remote storage.

  • Separation from the host

    A guest OS runs on a virtualized kernel, separate from the host OS. This means that any OS can be installed on a VM, and even if the guest OS becomes unstable or is compromised, the host is not affected in any way.

  • Space and cost efficiency

    A single physical machine can host a large number of VMs. Therefore, it avoids the need for multiple physical machines to do the same tasks, and thus lowers the space, power, and maintenance requirements associated with physical hardware.

  • Software compatibility

    Because a VM can use a different OS than its host, virtualization makes it possible to run applications that were not originally released for your host OS. For example, using a RHEL 7 guest OS, you can run applications released for RHEL 7 on a RHEL 9 host system.

    Note

    Not all operating systems are supported as a guest OS in a RHEL 9 host. For details, see Recommended features in RHEL 9 virtualization.

1.3. Virtual machine components and their interaction

Virtualization in RHEL 9 consists of the following principal software components:

Hypervisor

The basis of creating virtual machines (VMs) in RHEL 9 is the hypervisor, a software layer that controls hardware and enables running multiple operating systems on a host machine.

The hypervisor includes the Kernel-based Virtual Machine (KVM) module and virtualization kernel drivers. These components ensure that the Linux kernel on the host machine provides resources for virtualization to user-space software.

At the user-space level, the QEMU emulator simulates a complete virtualized hardware platform that the guest operating system can run in, and manages how resources are allocated on the host and presented to the guest.

In addition, the libvirt software suite serves as a management and communication layer, making QEMU easier to interact with, enforcing security rules, and providing a number of additional tools for configuring and running VMs.

XML configuration

A host-based XML configuration file (also known as a domain XML file) determines all settings and devices in a specific VM. The configuration includes:

  • Metadata such as the name of the VM, time zone, and other information about the VM.
  • A description of the devices in the VM, including virtual CPUs (vCPUS), storage devices, input/output devices, network interface cards, and other hardware, real and virtual.
  • VM settings such as the maximum amount of memory it can use, restart settings, and other settings about the behavior of the VM.

For more information on the contents of an XML configuration, see Sample virtual machine XML configuration.

Component interaction

When a VM is started, the hypervisor uses the XML configuration to create an instance of the VM as a user-space process on the host. The hypervisor also makes the VM process accessible to the host-based interfaces, such as the virsh, virt-install, and guestfish utilities, or the web console GUI.

When these virtualization tools are used, libvirt translates their input into instructions for QEMU. QEMU communicates the instructions to KVM, which ensures that the kernel appropriately assigns the resources necessary to carry out the instructions. As a result, QEMU can execute the corresponding user-space changes, such as creating or modifying a VM, or performing an action in the VM’s guest operating system.

Note

While QEMU is an essential component of the architecture, it is not intended to be used directly on RHEL 9 systems, due to security concerns. Therefore, using qemu-* commands is not supported by Red Hat, and it is highly recommended to interact with QEMU using libvirt.

For more information on the host-based interfaces, see Tools and interfaces for virtualization management.

Figure 1.1. RHEL 9 virtualization architecture

virt architecture

1.4. Tools and interfaces for virtualization management

You can manage virtualization in RHEL 9 using the command-line interface (CLI) or several graphical user interfaces (GUIs).

Command-line interface

The CLI is the most powerful method of managing virtualization in RHEL 9. Prominent CLI commands for virtual machine (VM) management include:

  • virsh - A versatile virtualization command-line utility and shell with a great variety of purposes, depending on the provided arguments. For example:

    • Starting and shutting down a VM - virsh start and virsh shutdown
    • Listing available VMs - virsh list
    • Creating a VM from a configuration file - virsh create
    • Entering a virtualization shell - virsh

    For more information, see the virsh(1) man page.

  • virt-install - A CLI utility for creating new VMs. For more information, see the virt-install(1) man page.
  • virt-xml - A utility for editing the configuration of a VM.
  • guestfish - A utility for examining and modifying VM disk images. For more information, see the guestfish(1) man page.

Graphical interfaces

You can use the following GUIs to manage virtualization in RHEL 9:

  • The RHEL 9 web console, also known as Cockpit, provides a remotely accessible and easy to use graphical user interface for managing VMs and virtualization hosts.

    For instructions on basic virtualization management with the web console, see Managing virtual machines in the web console.

1.5. Red Hat virtualization solutions

The following Red Hat products are built on top of RHEL 9 virtualization features and expand the KVM virtualization capabilities available in RHEL 9. In addition, many limitations of RHEL 9 virtualization do not apply to these products:

OpenShift Virtualization

Based on the KubeVirt technology, OpenShift Virtualization is a part of the Red Hat OpenShift Container Platform, and makes it possible to run virtual machines in containers.

For more information about OpenShift Virtualization see the Red Hat Hybrid Cloud pages.

Red Hat OpenStack Platform (RHOSP)

Red Hat OpenStack Platform offers an integrated foundation to create, deploy, and scale a secure and reliable public or private OpenStack cloud.

For more information about Red Hat OpenStack Platform, see the Red Hat Customer Portal or the Red Hat OpenStack Platform documentation suite.

Note

For details on virtualization features not supported in RHEL but supported in other Red Hat virtualization solutions, see Unsupported features in RHEL 9 virtualization.