Menu Close

Tuning performance in Identity Management

Red Hat Enterprise Linux 9

Adjusting Identity Management services for better performance on Red Hat Enterprise Linux 9

Red Hat Customer Content Services

Abstract

This documentation collection provides instructions for adjusting common performance settings in Identity Management on Red Hat Enterprise Linux 9.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. We are beginning with these four terms: master, slave, blacklist, and whitelist. Because of the enormity of this endeavor, these changes will be implemented gradually over several upcoming releases. For more details, see our CTO Chris Wright’s message.

In Identity Management, planned terminology replacements include:

  • block list replaces blacklist
  • allow list replaces whitelist
  • secondary replaces slave
  • The word master is being replaced with more precise language, depending on the context:

    • IdM server replaces IdM master
    • CA renewal server replaces CA renewal master
    • CRL publisher server replaces CRL master
    • multi-supplier replaces multi-master

Providing feedback on Red Hat documentation

We appreciate your input on our documentation. Please let us know how we could make it better.

  • For simple comments on specific passages:

    1. Make sure you are viewing the documentation in the Multi-page HTML format. In addition, ensure you see the Feedback button in the upper right corner of the document.
    2. Use your mouse cursor to highlight the part of text that you want to comment on.
    3. Click the Add Feedback pop-up that appears below the highlighted text.
    4. Follow the displayed instructions.
  • For submitting feedback via Bugzilla, create a new ticket:

    1. Go to the Bugzilla website.
    2. As the Component, use Documentation.
    3. Fill in the Description field with your suggestion for improvement. Include a link to the relevant part(s) of documentation.
    4. Click Submit Bug.

Chapter 1. Important considerations when tuning IdM

Identity Management’s component services are tuned to work in an optimal way for most deployments. As a System Administrator, you may want to adjust the performance of IdM services to suit the demands of your specific environment.

Important considerations

  • Each IdM deployment is a unique combination of hardware, software, networking, data, workloads, and many other factors. Adjustments that benefit one environment may be detrimental to another.
  • Performance-tuning is an iterative, experimental process. Red Hat recommends making adjustments to only one variable at a time and monitoring its impact in your environment. After achieving the desired result with one variable, adjust the next variable while continuing to monitor the performance of previous adjustments.

Chapter 2. Hardware recommendations

RAM is the most important hardware feature to size properly. Make sure your system has enough RAM available. Typical RAM requirements are:

  • For 10,000 users and 100 groups: at least 4 GB of RAM and 4 GB swap space
  • For 100,000 users and 50,000 groups: at least 16 GB of RAM and 4 GB of swap space

For larger deployments, it is more effective to increase the RAM than to increase disk space because much of the data is stored in cache. In general, adding more RAM leads to better performance for larger deployments due to caching.

Note

A basic user entry or a simple host entry with a certificate is approximately 5—​10 kB in size.

Chapter 3. Failover, load-balancing, and high-availability in IdM

Identity Management (IdM) has built-in failover mechanisms for IdM clients, and load-balancing and high-availability features for IdM servers.

3.1. Client-side failover capability

  • By default, the SSSD service on an IdM client is configured to use service (SRV) resource records from DNS to automatically determine the best IdM server to connect to. This behavior is controlled by the _srv_ option in the ipa_server parameter of the /etc/sssd/sssd.conf file:

    [root@client ~]# cat /etc/sssd/sssd.conf
    
    [domain/example.com]
    id_provider = ipa
    ipa_server = _srv_, server.example.com
    ...

    If an IdM server goes offline, the SSSD service on the IdM client connects to another IdM server it has automatically discovered.

  • If you prefer to bypass DNS lookups for performance reasons, remove the _srv_ entry from the ipa_server parameter and specify which IdM servers the client should connect to, in order of preference:

    [root@client ~]# cat /etc/sssd/sssd.conf
    
    [domain/example.com]
    id_provider = ipa
    ipa_server = server1.example.com, server2.example.com
    ...

3.2. Server-side load-balancing and service availability

You can achieve load-balancing and high-availability in IdM by installing multiple IdM replicas:

  • If you have a geographically dispersed network, you can shorten the path between IdM clients and the nearest accessible server by configuring multiple IdM replicas per data center.
  • Red Hat supports environments with up to 60 replicas.
  • The IdM replication mechanism provides active/active service availability: services at all IdM replicas are readily available at the same time.
Note

Red Hat recommends against combining IdM and other load-balancing or high-availability (HA) software.

Many third-party high availability solutions assume active/passive scenarios and cause unnecessary service interruption to IdM availability. Other solutions use virtual IPs or a single hostname per clustered service. All these methods do not typically work well with the type of service availability provided by the IdM solution. They also integrate very poorly with Kerberos, decreasing the overall security and stability of the deployment.

Chapter 4. Optimizing the replica topology

A robust replica topology distributes workloads and reduces replication delays. Follow these guidelines to optimize the layout of your replica topology.

4.1. Determining the appropriate number of replicas

Set up at least two replicas in each data center (not a hard requirement)
A data center can be, for example, a main office or a geographical location.
Set up a sufficient number of servers to serve your clients
One Identity Management (IdM) server can provide services to 2000 - 3000 clients. This assumes the clients query the servers multiple times a day, but not, for example, every minute. If you expect more frequent queries, plan for more servers.
Set up a sufficient number of Certificate Authority (CA) replicas
Only replicas with the CA role installed can replicate certificate data. If you use the IdM CA, ensure your environment has at least two CA replicas with certificate replication agreements between them.
Set up a maximum of 60 replicas in a single IdM domain
Red Hat supports environments with up to 60 replicas.

4.2. Connecting the replicas in a topology

Connect each replica to at least two other replicas
Configuring additional replication agreements ensures that information is replicated not just between the initial replica and the first server you installed, but between other replicas as well.
Connect a replica to a maximum of four other replicas (not a hard requirement)

A large number of replication agreements per server does not add significant benefits. A receiving replica can only be updated by one other replica at a time and meanwhile, the other replication agreements are idle. More than four replication agreements per replica typically means a waste of resources.

Note

This recommendation applies to both certificate replication and domain replication agreements.

There are two exceptions to the limit of four replication agreements per replica:

  • You want failover paths if certain replicas are not online or responding.
  • In larger deployments, you want additional direct links between specific nodes.

Configuring a high number of replication agreements can have a negative impact on overall performance: when multiple replication agreements in the topology are sending updates, certain replicas can experience a high contention on the changelog database file between incoming updates and the outgoing updates.

If you decide to use more replication agreements per replica, ensure that you do not experience replication issues and latency. However, note that large distances and high numbers of intermediate nodes can also cause latency problems.

Connect the replicas in a data center with each other
This ensures domain replication within the data center.
Connect each data center to at least two other data centers
This ensures domain replication between data centers.
Connect data centers using at least a pair of replication agreements
If data centers A and B have a replication agreement from A1 to B1, having a replication agreement from A2 to B2 ensures that if one of the servers is down, the replication can continue between the two data centers.

4.3. Replica topology examples

The figures below show examples of Identity Management (IdM) topologies based on the guidelines for creating a reliable topology.

Replica Topology Example 1 shows four data centers, each with four servers. The servers are connected with replication agreements.

Figure 4.1. Replica Topology Example 1

A diagram showing 4 data centers - Geo 1 through 4. Each data center has four servers connected to each other with replication agreements. There are also replication agreements connecting two servers from Geo 1 to two servers in Geo 2. This pattern continues with two servers in Geo 2 connected to two servers in Geo 3 and two servers in Geo 3 connected to Geo 4. This connects each data center so each server is at most 3 hops away from another Geo.



Replica Topology Example 2 shows three data centers, each with a different number of servers. The servers are connected with replication agreements.

Figure 4.2. Replica Topology Example 2

A diagram showing 3 data centers: Geo 1 has 5 servers each connected to the other - Geo 2 has two servers connected to each other - Geo 3 has 3 servers connected in a triangle. There are 2 connections from each Geo connecting two of its servers to 2 servers in the next Geo.

4.4. Additional resources

Chapter 5. Adjusting the search size and time limit

Some queries, such as requesting a list of IdM users, can return a very large number of entries. By tuning these search operations, you can improve the overall server performance when running the ipa *-find commands, such as ipa user-find, and when displaying corresponding lists in the Web UI.

Search size limit

Defines the maximum number of entries returned for a request sent to the server from a client’s CLI or from a browser accessing the IdM Web UI.

Default: 100 entries.

Search time limit

Defines the maximum time (in seconds) that the server waits for searches to run. Once the search reaches this limit, the server stops the search and returns the entries discovered in that time.

Default: 2 seconds.

If you set the values to -1, IdM will not apply any limits when searching.

Important

Setting search size or time limits too high can negatively affect server performance.

5.1. Adjusting the search size and time limit in the command line

The following procedure describes adjusting search size and time limits in the command line:

  • Globally
  • For a specific entry

Procedure

  1. To display current search time and size limits in CLI, use the ipa config-show command:

    $ ipa config-show
    
    Search time limit: 2
    Search size limit: 100
  2. To adjust the limits globally for all queries, use the ipa config-mod command and add the --searchrecordslimit and --searchtimelimit options. For example:

    $ ipa config-mod --searchrecordslimit=500 --searchtimelimit=5
  3. To temporarily adjust the limits only for a specific query, add the --sizelimit or --timelimit options to the command. For example:
$ ipa user-find --sizelimit=200 --timelimit=120

5.2. Adjusting the search size and time limit in the Web UI

The following procedure describes adjusting global search size and time limits in the IdM Web UI.

Procedure

  1. Log in to the IdM Web UI.
  2. Click IPA Server.

    Screenshot of the IdM Web UI highlighting the "IPA Server" tab from the top menu

  3. On the IPA Server tab, click Configuration.
  4. Set the required values in the Search Options area.

    Default values are:

    • Search size limit: 100 entries
    • Search time limit: 2 seconds
  5. Click Save at the top of the page.

    Screenshot of the IdM Web UI highlighting the Save button which is below the "Configuration" title at the top of the Configuration page

Chapter 6. Adjusting IdM Directory Server performance

You can tune the performance of Identity Management’s databases by adjusting LDAP attributes controlling the Directory Server’s resources and behavior.

To adjust how the Directory Server caches data, see the following procedures:

To adjust the Directory Server’s resource limits, see the following procedures:

To adjust timeouts that have the most influence on performance, see the following procedures:

To install an IdM server or replica with custom Directory Server settings from an LDIF file, see the following procedure:

6.1. Adjusting the entry cache size

Important

Red Hat recommends using the built-in cache auto-sizing feature for optimized performance. Only change this value if you need to purposely deviate from the auto-tuned values.

The nsslapd-cachememsize attribute specifies the size, in bytes, for the available memory space for the entry cache. This attribute is one of the most important values for controlling how much physical RAM the directory server uses.

If the entry cache size is too small, you might see the following error in the Directory Server error logs in the /var/log/dirsrv/slapd-INSTANCE-NAME/errors log file:

REASON: entry too large (83886080 bytes) for the import buffer size (67108864 bytes).  Try increasing nsslapd-cachememsize.

Red Hat recommends fitting the entry cache and the database index entry cache in memory.

Default value

209715200 (200 MiB)

Valid range

500000 - 18446744073709551615 (500 kB - (264-1))

Entry DN location

cn=database-name,cn=ldbm database,cn=plugins,cn=config

Prerequisites

  • The LDAP Directory Manager password

Procedure

  1. Disable automatic cache tuning.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com backend config set --cache-autosize=0
  2. Display the database suffixes and their corresponding back ends.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com backend suffix list
    cn=changelog (changelog)
    dc=example,dc=com (userroot)
    o=ipaca (ipaca)

    This command displays the name of the back end database next to each suffix. Use the suffix’s database name in the next step.

  3. Set the entry cache size for the database. This example sets the entry cache for the userroot database to 2 gigabytes.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com backend suffix set --cache-memsize=2147483648 userroot
  4. Restart the Directory Server.

    [root@server ~]# systemctl restart dirsrv.target
  5. Monitor the IdM directory server’s performance. If it does not change in a desirable way, repeat this procedure and adjust cache-memsize to a different value, or re-enable cache auto-sizing.

Verification steps

  • Display the value of the nsslapd-cachememsize attribute and verify it has been set to your desired value.

    [root@server ~]# ldapsearch -D "cn=directory manager" -w DirectoryManagerPassword -b "cn=userroot,cn=ldbm database,cn=plugins,cn=config" | grep nsslapd-cachememsize
    nsslapd-cachememsize: 2147483648

Additional resources

6.2. Adjusting the database index cache size

Important

Red Hat recommends using the built-in cache auto-sizing feature for optimized performance. Only change this value if you need to purposely deviate from the auto-tuned values.

The nsslapd-dbcachesize attribute controls the amount of memory the database indexes use. This cache size has less of an impact on Directory Server performance than the entry cache size does, but if there is available RAM after the entry cache size is set, Red Hat recommends increasing the amount of memory allocated to the database cache.

The database cache is limited to 1.5 GB RAM because higher values do not improve performance.

Default value

10000000 (10 MB)

Valid range

500000 - 1610611911 (500 kB - 1.5GB)

Entry DN location

cn=config,cn=ldbm database,cn=plugins,cn=config

Prerequisites

  • The LDAP Directory Manager password

Procedure

  1. Disable automatic cache tuning, and set the database cache size. This example sets the database cache to 256 megabytes.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com backend config set --cache-autosize=0 --dbcachesize=268435456
  2. Restart the Directory Server.

    [root@server ~]# systemctl restart dirsrv.target
  3. Monitor the IdM directory server’s performance. If it does not change in a desirable way, repeat this procedure and adjust dbcachesize to a different value, or re-enable cache auto-sizing.

Verification steps

  • Display the value of the nsslapd-dbcachesize attribute and verify it has been set to your desired value.

    [root@server ~]# ldapsearch -D "cn=directory manager" -w DirectoryManagerPassword -b "cn=config,cn=ldbm database,cn=plugins,cn=config" | grep nsslapd-dbcachesize
    nsslapd-dbcachesize: 2147483648

Additional resources

6.3. Re-enabling database and entry cache auto-sizing

Important

Red Hat recommends using the built-in cache auto-sizing feature for optimized performance. Red Hat does not recommend setting cache sizes manually.

By default, the IdM Directory Server automatically determines the optimal size for the database cache and entry cache. Auto-sizing sets aside a portion of free RAM and optimizes the size of both caches based on the hardware resources of the server when the instance starts.

Use this procedure to undo custom database cache and entry cache values and restore the cache auto-sizing feature to its default values.

nsslapd-cache-autosize

This settings controls how much free RAM is allocated for auto-sizing the database and entry caches. A value of 0 disables auto-sizing.

Default value

10 (10% of free RAM)

Valid range

0 - 100

Entry DN location

cn=config,cn=ldbm database,cn=plugins,cn=config

nsslapd-cache-autosize-split

This value sets the percentage of free memory determined by nsslapd-cache-autosize that is used for the database cache. The remaining percentage is used for the entry cache.

Default value

25 (25% for the database cache, 60% for the entry cache)

Valid range

0 - 100

Entry DN location

cn=config,cn=ldbm database,cn=plugins,cn=config

Prerequisites

  • You have previously disabled database and entry cache auto-tuning.

Procedure

  1. Stop the Directory Server.

    [root@server ~]# systemctl stop dirsrv.target
  2. Backup the /etc/dirsrv/slapd-instance_name/dse.ldif file before making any further modifications.

    [root@server ~]# *cp /etc/dirsrv/slapd-instance_name/dse.ldif \
         /etc/dirsrv/slapd-instance_name/dse.ldif.bak.$(date "+%F_%H-%M-%S")
  3. Edit the /etc/dirsrv/slapd-instance_name/dse.ldif file:

    1. Set the percentage of free system RAM to use for the database and entry caches back to the default of 10% of free RAM.

      nsslapd-cache-autosize: 10
    2. Set the percentage used from the free system RAM for the database cache to the default of 25%:

      nsslapd-cache-autosize-split: 25
  4. Save your changes to the /etc/dirsrv/slapd-instance_name/dse.ldif file.
  5. Start the Directory Server.

    [root@server ~]# systemctl start dirsrv.target

Verification steps

  • Display the values of the nsslapd-cache-autosize and nsslapd-cache-autosize-split attributes and verify they have been set to your desired values.

    [root@server ~]# ldapsearch -D "cn=directory manager" -w DirectoryManagerPassword -b "cn=config,cn=ldbm database,cn=plugins,cn=config" | grep nsslapd-cache-autosize nsslapd-cache-autosize: *10
    nsslapd-cache-autosize-split: 25

Additional resources

6.4. Adjusting the DN cache size

Important

Red Hat recommends using the built-in cache auto-sizing feature for optimized performance. Only change this value if you need to purposely deviate from the auto-tuned values.

The nsslapd-dncachememsize attribute specifies the size, in bytes, for the available memory space for the Distinguished Names (DN) cache. The DN cache is similar to the entry cache for a database, but its table stores only the entry ID and the entry DN, which allows faster lookups for rename and moddn operations.

Default value

10485760 (10 MB)

Valid range

500000 - 18446744073709551615 (500 kB - (264-1))

Entry DN location

cn=database-name,cn=ldbm database,cn=plugins,cn=config

Prerequisites

  • The LDAP Directory Manager password

Procedure

  1. (Optional) Display the database suffixes and their corresponding database names.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com backend suffix list
    dc=example,dc=com (userroot)

    This command displays the name of the back end database next to each suffix. Use the suffix’s database name in the next step.

  2. Set the DN cache size for the database. This example sets the DN cache to 20 megabytes.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com backend suffix set --dncache-memsize=20971520 userroot
  3. Restart the Directory Server.

    [root@server ~]# systemctl restart dirsrv.target
  4. Monitor the IdM directory server’s performance. If it does not change in a desirable way, repeat this procedure and adjust dncache-memsize to a different value, or back to the default of 10 MB.

Verification steps

  • Display the new value of the nsslapd-dncachememsize attribute and verify it has been set to your desired value.

    [root@server ~]# ldapsearch -D "cn=directory manager" -w DirectoryManagerPassword -b "cn=userroot,cn=ldbm database,cn=plugins,cn=config" | grep nsslapd-dncachememsize
    nsslapd-dncachememsize: 20971520

Additional resources

6.5. Adjusting the normalized DN cache size

Important

Red Hat recommends using the built-in cache auto-sizing feature for optimized performance. Only change this value if you need to purposely deviate from the auto-tuned values.

The nsslapd-ndn-cache-max-size attribute controls the size, in bytes, of the cache that stores normalized distinguished names (NDNs). Increasing this value will retain more frequently used DNs in memory.

Default value

20971520 (20 MB)

Valid range

0 - 2147483647

Entry DN location

cn=config

Prerequisites

  • The LDAP Directory Manager password

Procedure

  1. Ensure the NDN cache is enabled.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config get nsslapd-ndn-cache-enabled
    Enter password for cn=Directory Manager on ldap://server.example.com:
    nsslapd-ndn-cache-enabled: on

    If the cache is off, enable it with the following command.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config replace nsslapd-ndn-cache-enabled=on
    Enter password for cn=Directory Manager on ldap://server.example.com:
    Successfully replaced "nsslapd-ndn-cache-enabled"
  2. Retrieve the current value of the nsslapd-ndn-cache-max-size parameter and make a note of it before making any adjustments, in case it needs to be restored. Enter the Directory Manager password when prompted.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config get nsslapd-ndn-cache-max-size
    Enter password for cn=Directory Manager on ldap://server.example.com:
    nsslapd-ndn-cache-max-size: 20971520
  3. Modify the value of the nsslapd-ndn-cache-max-size attribute. This example increases the value to 41943040 (40 MB).

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config replace nsslapd-ndn-cache-max-size=41943040
  4. Monitor the IdM directory server’s performance. If it does not change in a desirable way, repeat this procedure and adjust nsslapd-ndn-cache-max-size to a different value, or re-enable cache auto-sizing.

Verification steps

  • Display the new value of the nsslapd-ndn-cache-max-size attribute and verify it has been set to your desired value.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config get nsslapd-ndn-cache-max-size
    Enter password for cn=Directory Manager on ldap://server.example.com:
    nsslapd-ndn-cache-max-size: 41943040

Additional resources

6.6. Adjusting the maximum message size

The nsslapd-maxbersize attribute sets the maximum size in bytes allowed for an incoming message or LDAP request. Limiting the size of requests prevents some kinds of denial of service attacks.

If the maximum message size is too small, you might see the following error in the Directory Server error logs at /var/log/dirsrv/slapd-INSTANCE-NAME/errors:

Incoming BER Element was too long, max allowable is 2097152 bytes. Change the nsslapd-maxbersize attribute in cn=config to increase.

The limit applies to the total size of the LDAP request. For example, if the request is to add an entry and if the entry in the request is larger than the configured value or the default, then the add request is denied. However, the limit is not applied to replication processes. Be cautious before changing this attribute.

Default value

209715200 (20 MB)

Valid range

0 - 2147483647

Entry DN location

cn=config

Prerequisites

  • The LDAP Directory Manager password

Procedure

  1. Retrieve the current value of the nsslapd-maxbersize parameter and make a note of it before making any adjustments, in case it needs to be restored. Enter the Directory Manager password when prompted.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config get nsslapd-maxbersize
    Enter password for cn=Directory Manager on ldap://server.example.com:
    nsslapd-maxbersize: 209715200
  2. Modify the value of the nsslapd-maxbersize attribute. This example increases the value to 419430400.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config replace nsslapd-maxbersize=419430400
  3. Authenticate as the Directory Manager to make the configuration change.

    Enter password for cn=Directory Manager on ldap://server.example.com:
    Successfully replaced "nsslapd-maxbersize"
  4. Monitor the IdM directory server’s performance. If it does not change in a desirable way, repeat this procedure and adjust nsslapd-maxbersize to a different value, or back to the default of 209715200.

Verification steps

  • Display the value of the nsslapd-maxbersize attribute and verify it has been set to your desired value.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config get nsslapd-maxbersize
    Enter password for cn=Directory Manager on ldap://server.example.com:
    nsslapd-maxbersize: 419430400

Additional resources

6.7. Adjusting the maximum number of file descriptors

The nsslapd-maxdescriptors attribute sets the maximum, platform-dependent number of file descriptors that the Directory Server uses. File descriptors are used for client connections, log files, sockets, and other resources.

If you set the nsslapd-maxdescriptors value higher than the total number of file descriptors that the operating system allows the ns-slapd process to use, the Directory Server queries the operating system for the maximum allowable value, and then uses that value.

Default value

4096 descriptors

Valid range

1 - 65535

Entry DN location

cn=config

Prerequisites

  • The LDAP Directory Manager password

Procedure

  1. Retrieve the current value of the nsslapd-maxdescriptors parameter and make a note of it before making any adjustments, in case it needs to be restored. Enter the Directory Manager password when prompted.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config get nsslapd-maxdescriptors
    Enter password for cn=Directory Manager on ldap://server.example.com:
    nsslapd-maxdescriptors: 4096
  2. Modify the value of the nsslapd-maxdescriptors attribute. This example increases the value to 8192.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config replace nsslapd-maxdescriptors=8192
  3. Authenticate as the Directory Manager to make the configuration change.

    Enter password for cn=Directory Manager on ldap://server.example.com:
    Successfully replaced "nsslapd-maxdescriptors"
  4. Monitor the IdM directory server’s performance. If it does not change in a desirable way, repeat this procedure and adjust nsslapd-maxdescriptors to a different value, or back to the default of 4096.

Verification steps

  • Display the value of the nsslapd-maxdescriptors attribute and verify it has been set to your desired value.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config get nsslapd-maxdescriptors
    Enter password for cn=Directory Manager on ldap://server.example.com:
    nsslapd-maxdescriptors: 8192

Additional resources

6.8. Adjusting the connection backlog size

The listen service sets the number of sockets available to receive incoming connections. The nsslapd-listen-backlog-size value sets the maximum length of the queue for the sockfd socket before refusing connections.

If your IdM environment handles a large amount of connections, consider increasing the value of nsslapd-listen-backlog-size.

Default value

128 queue slots

Valid range

0 - 9223372036854775807

Entry DN location

cn=config

Prerequisites

  • The LDAP Directory Manager password

Procedure

  1. Retrieve the current value of the nsslapd-listen-backlog-size parameter and make a note of it before making any adjustments, in case it needs to be restored. Enter the Directory Manager password when prompted.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config get nsslapd-listen-backlog-size
    Enter password for cn=Directory Manager on ldap://server.example.com:
    nsslapd-listen-backlog-size: 128
  2. Modify the value of the nsslapd-listen-backlog-size attribute. This example increases the value to 192.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config replace nsslapd-listen-backlog-size=192
  3. Authenticate as the Directory Manager to make the configuration change.

    Enter password for cn=Directory Manager on ldap://server.example.com:
    Successfully replaced "nsslapd-listen-backlog-size"

Verification steps

  • Display the value of the nsslapd-listen-backlog-size attribute and verify it has been set to your desired value.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config get nsslapd-listen-backlog-size
    Enter password for cn=Directory Manager on ldap://server.example.com:
    nsslapd-listen-backlog-size: 192

Additional resources

6.9. Adjusting the maximum number of database locks

Lock mechanisms control how many copies of Directory Server processes can run at the same time, and the nsslapd-db-locks parameter sets the maximum number of locks.

Increase the maximum number of locks if if you see the following error messages in the /var/log/dirsrv/slapd-instance_name/errors log file:

libdb: Lock table is out of available locks

Default value

50000 locks

Valid range

0 - 2147483647

Entry DN location

cn=bdb,cn=config,cn=ldbm database,cn=plugins,cn=config

Prerequisites

  • The LDAP Directory Manager password

Procedure

  1. Retrieve the current value of the nsslapd-db-locks parameter and make a note of it before making any adjustments, in case it needs to be restored.

    [root@server ~]# ldapsearch -D "cn=directory manager" -w DirectoryManagerPassword -b "cn=bdb,cn=config,cn=ldbm database,cn=plugins,cn=config" | grep nsslapd-db-locks
    nsslapd-db-locks: 50000
  2. Modify the value of the locks attribute. This example doubles the value to 100000 locks.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com backend config set --locks=100000
  3. Authenticate as the Directory Manager to make the configuration change.

    Enter password for cn=Directory Manager on ldap://server.example.com:
    Successfully updated database configuration
  4. Restart the Directory Server.

    [root@server ~]# systemctl restart dirsrv.target

Verification steps

  • Display the value of the nsslapd-db-locks attribute and verify it has been set to your desired value.

    [root@server ~]# ldapsearch -D "cn=directory manager" -w DirectoryManagerPassword -b "cn=bdb,cn=config,cn=ldbm database,cn=plugins,cn=config" | grep nsslapd-db-locks
    nsslapd-db-locks: 100000

Additional resources

6.10. Adjusting the input/output block timeout

The nsslapd-ioblocktimeout attribute sets the amount of time in milliseconds after which the connection to a stalled LDAP client is closed. An LDAP client is considered to be stalled when it has not made any I/O progress for read or write operations.

Lower the value of the nsslapd-ioblocktimeout attribute to free up connections sooner.

Default value

10000 milliseconds

Valid range

0 - 2147483647

Entry DN location

cn=config

Prerequisites

  • The LDAP Directory Manager password

Procedure

  1. Retrieve the current value of the nsslapd-ioblocktimeout parameter and make a note of it before making any adjustments, in case it needs to be restored. Enter the Directory Manager password when prompted.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config get nsslapd-ioblocktimeout
    Enter password for cn=Directory Manager on ldap://server.example.com:
    nsslapd-ioblocktimeout: 10000
  2. Modify the value of the nsslapd-ioblocktimeout attribute. This example lowers the value to 8000.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config replace nsslapd-ioblocktimeout=8000
  3. Authenticate as the Directory Manager to make the configuration change.

    Enter password for cn=Directory Manager on ldap://server.example.com:
    Successfully replaced "nsslapd-ioblocktimeout"
  4. Monitor the IdM directory server’s performance. If it does not change in a desirable way, repeat this procedure and adjust nsslapd-ioblocktimeout to a different value, or back to the default of 10000.

Verification steps

  • Display the value of the nsslapd-ioblocktimeout attribute and verify it has been set to your desired value.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config get nsslapd-ioblocktimeout
    Enter password for cn=Directory Manager on ldap://server.example.com:
    nsslapd-idletimeout: 8000

Additional resources

6.11. Adjusting the idle connection timeout

The nsslapd-idletimeout attribute sets the amount of time in seconds after which an idle LDAP client connection is closed by the IdM server. A value of 0 means that the server never closes idle connections.

Red Hat recommends adjusting this value so stale connections are closed, but active connections are not closed prematurely.

Default value

3600 seconds (1 hour)

Valid range

0 - 2147483647

Entry DN location

cn=config

Prerequisites

  • The LDAP Directory Manager password

Procedure

  1. Retrieve the current value of the nsslapd-idletimeout parameter and make a note of it before making any adjustments, in case it needs to be restored. Enter the Directory Manager password when prompted.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config get nsslapd-idletimeout
    Enter password for cn=Directory Manager on ldap://server.example.com:
    nsslapd-idletimeout: 3600
  2. Modify the value of the nsslapd-idletimeout attribute. This example lowers the value to 1800 (30 minutes).

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config replace nsslapd-idletimeout=1800
  3. Authenticate as the Directory Manager to make the configuration change.

    Enter password for cn=Directory Manager on ldap://server.example.com:
    Successfully replaced "nsslapd-idletimeout"
  4. Monitor the IdM directory server’s performance. If it does not change in a desirable way, repeat this procedure and adjust nsslapd-idletimeout to a different value, or back to the default of 3600.

Verification steps

  • Display the value of the nsslapd-idletimeout attribute and verify it has been set to your desired value.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com config get nsslapd-idletimeout
    Enter password for cn=Directory Manager on ldap://server.example.com:
    nsslapd-idletimeout: 3600

Additional resources

6.12. Adjusting the replication release timeout

An IdM replica is exclusively locked during a replication session with another replica. In some environments, a replica is locked for a long time due to large updates or network congestion, which increases replication latency.

You can release a replica after a fixed amount of time by adjusting the repl-release-timeout parameter. Red Hat recommends setting this value between 30 and 120:

  • If the value is set too low, replicas are constantly reacquiring one another and replicas are not able to send larger updates.
  • A longer timeout can improve high-traffic situations where it is best if a server exclusively accesses a replica for longer amounts of time, but a value higher than 120 seconds slows down replication.

Default value

60 seconds

Valid range

0 - 2147483647

Recommended range

30 - 120

Prerequisites

  • The LDAP Directory Manager password

Procedure

  1. Display the database suffixes and their corresponding back ends.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com backend suffix list
    cn=changelog (changelog)
    dc=example,dc=com (userroot)
    o=ipaca (ipaca)

    This command displays the names of the back end databases next to their suffix. Use the suffix name in the next step.

  2. Modify the value of the repl-release-timeout attribute for the main userroot database. This example increases the value to 90 seconds.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com replication set --suffix="dc=example,dc=com" --repl-release-timeout=90
  3. Authenticate as the Directory Manager to make the configuration change.

    Enter password for cn=Directory Manager on ldap://server.example.com:
    Successfully replaced "repl-release-timeout"
  4. (Optional) If your IdM environment uses the IdM Certificate Authority (CA), you can modify the value of the repl-release-timeout attribute for the CA database. This example increases the value to 90 seconds.

    [root@server ~]# dsconf -D "cn=Directory Manager" ldap://server.example.com replication set --suffix="o=ipaca" --repl-release-timeout=90
    Enter password for cn=Directory Manager on ldap://server.example.com:
    Successfully replaced "repl-release-timeout"
  5. Restart the Directory Server.

    [root@server ~]# systemctl restart dirsrv.target
  6. Monitor the IdM directory server’s performance. If it does not change in a desirable way, repeat this procedure and adjust repl-release-timeout to a different value, or back to the default of 60 seconds.

Verification steps

  • Display the value of the nsds5ReplicaReleaseTimeout attribute and verify it has been set to your desired value.

    [root@server ~]# ldapsearch -D "cn=directory manager" -w DirectoryManagerPassword -b "cn=replica,cn=dc\3Dexample\2Cdc\3Dcom,cn=mapping tree,cn=config" | grep nsds5ReplicaReleaseTimeout
    nsds5ReplicaReleaseTimeout: 90
Note

The Distinguished Name of the suffix in this example is dc=example,dc=com, but the equals sign (=) and comma (,) must be escaped in the ldapsearch command.

Convert the suffix DN to cn=dc\3Dexample\2Cdc\3Dcom with the following escape characters:

  • \3D replacing =
  • \2C replacing ,

Additional resources

6.13. Installing an IdM server or replica with custom database settings from an LDIF file

You can install an IdM server and IdM replicas with custom settings for the Directory Server database. The following procedure shows you how to create an LDAP Data Interchange Format (LDIF) file with database settings, and how to pass those settings to the IdM server and replica installation commands.

Prerequisites

Procedure

  1. Create a text file in LDIF format with your custom database settings. Separate LDAP attribute modifications with a dash (-). This example sets non-default values for the idle timeout and maximum file descriptors.

    dn: cn=config
    changetype: modify
    replace: nsslapd-idletimeout
    nsslapd-idletimeout=1800
    -
    replace: nsslapd-maxdescriptors
    nsslapd-maxdescriptors=8192
  2. Use the --dirsrv-config-file parameter to pass the LDIF file to the installation script.

    1. To install an IdM server:

      # ipa-server-install --dirsrv-config-file filename.ldif
    2. To install an IdM replica:

      # ipa-replica-install --dirsrv-config-file filename.ldif

6.14. Additional resources

Chapter 7. Adjusting the performance of the KDC

The following sections describe how to adjust the performance of the Kerberos Key Distribution Center (KDC), which is responsible for authenticating users, hosts, and services.

7.1. Adjusting the length of the KDC listen queue

You can adjust the size of the listen queue length for the KDC daemon by setting the kdc_tcp_listen_backlog option in the [kdcdefaults] section of the /var/kerberos/krb5kdc/kdc.conf file. The default value of 5 may be too low for some IdM deployments that experience high amounts of Kerberos traffic, but setting this value too high degrades performance.

Default value

5

Valid range

1 - 10

Procedure

  1. Open the /var/kerberos/krb5kdc/kdc.conf file in a text editor.
  2. Set the TCP listen backlog to your desired value, such as 7.

    [kdcdefaults]
     ...
     kdc_tcp_listen_backlog = 7
  3. Save and close the /var/kerberos/krb5kdc/kdc.conf file.
  4. Restart the KDC to load the new settings.

7.2. Options controlling KDC behavior per realm

To track locking and unlocking user accounts for each Kerberos realm, the KDC writes to its database after each successful and failed authentication. By adjusting the following options in the [dbmodules] section of the /etc/krb5.conf file, you may be able to improve performance by minimizing how often the KDC writes information.

disable_last_success

If set to true, this option suppresses KDC updates to the Last successful authentication field of principal entries requiring preauthentication.

Default value

false

Valid range

true or false

disable_lockout

If set to true, this option suppresses KDC updates to the Last failed authentication and Failed password attempts fields of principal entries requiring preauthentication. Setting this flag may improve performance, but disabling account lockout may be considered a security risk.

Default value

false

Valid range

true or false

Additional resources

7.3. Adjusting KDC settings per realm

This procedure adjusts KDC behavior per Kerberos realm.

Procedure

  1. Open the /etc/krb5.conf file in a text editor.
  2. Specify any options and their desired values within the [dbmodules] section, and in the respective Kerberos realm. In this example, you are setting the disable_last_success variable for the EXAMPLE.COM Kerberos realm.

    [dbmodules]
        EXAMPLE.COM = {
            disable_last_success = true
        }
  3. Save and close the /etc/krb5.conf file.
  4. Restart the KDC to load the new settings.

7.4. Adjusting the number of krb5kdc processes

This procedure describes how to manually adjust the number of processes that the Key Distribution Center (KDC) starts to handle incoming connections.

By default, the IdM installer detects the number of CPU cores and enters the value in the /etc/sysconfig/krb5kdc file. For example, the file might contain the following entry:

KRB5KDC_ARGS='-w 2'
[...]

In this example, with the KRB5KDC_ARGS parameter set to -w 2, the KDC starts two separate processes to handle incoming connections from the main process. You might want to adjust this value, especially in virtual environments where you can easily add or remove the number of virtual CPUs based on your requirements. To prevent performance issues or even IdM servers becoming unresponsive due to an ever-increasing TCP/IP queue on port 88, simulate a higher number of processes by manually setting the KRB5KDC_ARGS parameter to a higher value.

Procedure

  1. Open the /etc/sysconfig/krb5kdc file in a text editor.
  2. Specify the value of the KRB5KDC_ARGS parameter. In this example, you are setting the number of processes to 10:

    KRB5KDC_ARGS='-w 10'
    [...]
  3. Save and close the /etc/sysconfig/krb5kdc file.
  4. Reload the systemd configuration:

    # systemctl daemon-reload
  5. Restart the krb5kdc service:

    # systemctl restart krb5kdc.service

7.5. Additional resources

Chapter 8. Tuning SSSD performance for large IdM-AD trust deployments

Retrieving user and group information is a very data-intensive operation for the System Security Services Daemon (SSSD), especially in an IdM deployment with a trust to a large Active Directory (AD) domain. You can improve this performance by adjusting which information SSSD retrieves from identity providers and for how long.

8.1. Tuning SSSD in IdM servers for large IdM-AD trust deployments

This procedure applies tuning options to the configuration of the SSSD service in an IdM server to improve its response time when retrieving information from a large AD environment.

Prerequisites

  • You need root permissions to edit the /etc/sssd/sssd.conf configuration file.

Procedure

  1. Open the /etc/sssd/sssd.conf configuration file in a text editor.
  2. Add the following options to the [domain] section for your Active Directory domain. If you do not already have a domain section for your AD domain, create one.

    [domain/ad.example.com]
    ignore_group_members = true
    subdomain_inherit = ignore_group_members
    ...
  3. Save and close the /etc/sssd/sssd.conf file on the server.
  4. Restart the SSSD service to load the configuration changes.

    [root@client ~]# systemctl restart sssd

8.2. Tuning the config timeout for the ipa-extdom plugin on IdM servers

IdM clients cannot receive information about users and groups from Active Directory (AD) directly, so IdM servers use the ipa-extdom plugin to receive information about AD users and groups, and that information is forwarded to the requesting client.

The ipa-extdom plug-in sends a request to SSSD for the data about AD users. If the information is not in the SSSD cache, SSSD requests the data from an AD domain controller (DC). You can adjust the config timeout value, which defines how long the ipa-extdom plug-in waits for a reply from SSSD before the plug-in cancels the connection and returns a timeout error to the caller. The default value is 10000 milliseconds (10 seconds).

The following example adjusts the config timeout to 20 seconds (20000 milliseconds).

Warning

Exercise caution when adjusting the config timeout:

  • If you set a value that is too small, such as 500 milliseconds, SSSD might not have enough time to reply and requests will always return a timeout.
  • If you set a value that is too large, such as 30000 milliseconds (30 seconds), a single request might block the connection to SSSD for this amount of time. Because only one thread can connect to SSSD at a time, all other requests from the plug-in have to wait.
  • If there are many requests sent by IdM clients, they can block all available workers configured for the Directory Server on the IdM server. As a consequence, the server might not be able to reply to any kind of request for some time.

Only change the config timeout in the following situations:

  • If IdM clients frequently receive timeout errors before their own search timeout is reached when requesting information about AD users and groups, the config timeout value is too small.
  • If the Directory Server on the IdM server is often locked and the pstack utility reports that many or all worker threads are handling ipa-extdom requests at this time, the value is too large.

Prerequisites

  • The LDAP Directory Manager password

Procedure

  • Use the following command to adjust the config timeout to 20000 milliseconds:

    # ldapmodify -D "cn=directory manager" -W
    dn: cn=ipa_extdom_extop,cn=plugins,cn=config
    changetype: modify
    replace: ipaExtdomMaxNssTimeout
    ipaExtdomMaxNssTimeout: 20000

8.3. Tuning the maximum buffer size for the ipa-extdom plugin on IdM servers

IdM clients cannot receive information about users and groups from Active Directory (AD) directly, so IdM servers use the ipa-extdom plugin to receive information about AD users and groups, and that information is forwarded to the requesting client.

You can tune the maximum buffer size for the ipa-extdom plugin, which adjusts the size of the buffer where SSSD can store the data it receives. If the buffer is too small, SSSD returns an ERANGE error and the plug-in retries the request with a larger buffer. The default buffer size is 134217728 bytes (128 MB).

The following example adjusts the maximum buffer size to 256 MB (268435456 bytes).

Prerequisites

  • The LDAP Directory Manager password

Procedure

  • Use the following command to set the maximum buffer size to 268435456 bytes:

    # ldapmodify -D "cn=directory manager" -W
    dn: cn=ipa_extdom_extop,cn=plugins,cn=config
    changetype: modify
    replace: ipaExtdomMaxNssBufSize
    ipaExtdomMaxNssBufSize: 268435456

8.4. Tuning the maximum number of instances for the ipa-extdom plugin on IdM servers

As IdM clients cannot receive information about users and groups from Active Directory (AD) directly, IdM servers use the ipa-extdom plugin to receive information about AD users and groups and then forward this information to the requesting client.

By default, the ipa-extdom plugin is configured to use up to 80% of the LDAP worker threads to handle requests from IdM clients. If the SSSD service on an IdM client has requested a large amount of information about AD trust users and groups, this operation can halt the LDAP service if it uses most of the LDAP threads. If you experience these issues, you might see similar errors in the SSSD log file for your AD domain, /var/log/sssd/sssd__your-ad-domain-name.com_.log:

(2022-05-22  5:00:13): [be[ad.example.com]] [ipa_s2n_get_user_done] (0x0040): s2n exop request failed.
(2022-05-22  5:00:13): [be[ad.example.com]] [ipa_s2n_get_user_done] (0x0040): s2n exop request failed.
(2022-05-22  5:00:13): [be[ad.example.com]] [ipa_s2n_exop_done] (0x0040): ldap_extended_operation result: Server is busy(51), Too many extdom instances running.

You can adjust the maximum number of ipa-extdom instances by setting the value for the ipaExtdomMaxInstances option, which must be an integer larger than 0 and less than the total number of worker threads.

Prerequisites

  • The LDAP Directory Manager password

Procedure

  1. Retrieve the total number of worker threads.

    # ldapsearch -xLLLD cn=directory\ manager -W -b cn=config -s base nsslapd-threadnumber
    Enter LDAP Password:
    dn: cn=config
    nsslapd-threadnumber: 16

    This means that the current value for ipaExtdomMaxInstances is 13.

  2. Adjust the maximum number of instances. This example changes the value to 14:

    # ldapmodify -D "cn=directory manager" -W
    dn: cn=ipa_extdom_extop,cn=plugins,cn=config
    changetype: modify
    replace: ipaExtdomMaxInstances
    ipaExtdomMaxInstances: 14
  3. Monitor the IdM directory server’s performance and if it does not improve, repeat this procedure and adjust the value of the ipaExtdomMaxInstances variable.

8.5. Tuning SSSD in IdM clients for large IdM-AD trust deployments

This procedure applies tuning options to SSSD service configuration in an IdM client to improve its response time when retrieving information from a large AD environment.

Prerequisites

  • You need root permissions to edit the /etc/sssd/sssd.conf configuration file.

Procedure

  1. Determine the number of seconds a single un-cached login takes.

    1. Clear the SSSD cache on the IdM client client.example.com.

      [root@client ~]# sss_cache -E
    2. Measure how long it takes to log in as an AD user with the time command. In this example, from the IdM client client.example.com, log into the same host as the user ad-user from the ad.example.com AD domain.

      [root@client ~]# time ssh ad-user@ad.example.com@client.example.com
    3. Type in the password as soon as possible.

      Password:
      Last login: Sat Jan 23 06:29:54 2021 from 10.0.2.15
      [ad-user@ad.example.com@client ~]$
    4. Log out as soon as possible to display elapsed time. In this example, a single un-cached login takes about 9 seconds.

      [ad-user@ad.example.com@client /]$ exit
      logout
      Connection to client.example.com closed.
      
      real 0m8.755s
      user    0m0.017s
      sys     0m0.013s
  2. Open the /etc/sssd/sssd.conf configuration file in a text editor.
  3. Add the following options to the [domain] section for your Active Directory domain. Set the pam_id_timeout and krb5_auth_timeout options to the number of seconds an un-cached login takes. If you do not already have a domain section for your AD domain, create one.

    [domain/example.com/ad.example.com]
    krb5_auth_timeout = 9
    ldap_deref_threshold = 0
    ...
  4. Add the following option to the [pam] section:

    [pam]
    pam_id_timeout = 9
  5. Save and close the /etc/sssd/sssd.conf file on the server.
  6. Restart the SSSD service to load the configuration changes.

    [root@client ~]# systemctl restart sssd

8.6. Mounting the SSSD cache in tmpfs

The System Security Services Daemon (SSSD) constantly writes LDAP objects to its cache. These internal SSSD transactions write data to disk, which is much slower than reading and writing from Random-Access Memory (RAM).

To improve this performance, mount the SSSD cache in RAM.

Considerations

  • Cached information does not persist after a reboot if the SSSD cache is in RAM.
  • It is safe to perform this change on IdM servers, as the SSSD instance on an IdM server cannot lose connectivity with the Directory Server on the same host.
  • If you perform this adjustment on an IdM client and it loses connectivity to IdM servers, users will not be able to authenticate after a reboot until you reestablish connectivity.

Prerequisites

  • You need root permissions to edit the /etc/fstab configuration file.

Procedure

  1. Create a tmpfs temporary filesystem:

    1. On RHEL 8.6 and higher, confirm that the SSSD user owns the config.ldb file:

      # ls -al /var/lib/sss/db/config.ldb
      -rw-------. 1 sssd sssd 1286144 Jun  8 16:41 /var/lib/sss/db/config.ldb

      In this case, add the following entry to the /etc/fstab file as a single line:

      tmpfs /var/lib/sss/db/ tmpfs size=300M,mode=0700,uid=sssd,gid=sssd,rootcontext=system_u:object_r:sssd_var_lib_t:s0 0 0
    2. On RHEL 8 versions lower than 8.6, the config.ldb file is owned by the root user:

      # ls -al /var/lib/sss/db/config.ldb
      -rw-------. 1 root root 1286144 Jun  8 14:15 /var/lib/sss/db/config.ldb

      In this case, add the following entry to the /etc/fstab file as a single line:

      tmpfs /var/lib/sss/db/ tmpfs size=300M,mode=0700,rootcontext=system_u:object_r:sssd_var_lib_t:s0 0 0

      This example creates a 300MB cache. Tune the size parameter according to your IdM and AD directory size, estimating 100 MBs per 10,000 LDAP entries.

  2. Mount the new SSSD cache directory.

    [root@host ~]# mount /var/lib/sss/db/
  3. Restart SSSD to reflect this configuration change.

    [root@host ~]# systemctl restart sssd

8.7. Options in sssd.conf for tuning IdM servers and clients for large IdM-AD trust deployments

You can use the following options in the /etc/sssd/sssd.conf configuration file to tune the performance of SSSD in IdM servers and clients when you have a large IdM-AD trust deployment.

8.7.1. Tuning options for IdM servers

ignore_group_members

Knowing which groups a user belongs to, as opposed to all the users that belong to a group, is important when authenticating and authorizing a user. When ignore_group_members is set to true, SSSD only retrieves information about the group objects themselves and not their members, providing a significant performance boost.

Note

The id user@ad-domain.com command still returns the correct list of groups, but getent group ad-group@ad-domain.com returns an empty list.

Default value

false

Recommended value

true

Note

You should not set this option to true when the deployment involves an IdM server with the compat tree.

subdomain_inherit

With the subdomain_inherit option, you can apply the ignore_group_members setting to the trusted AD domains’ configuration. Settings listed in the subdomain_inherit options apply to both the main (IdM) domain as well as the AD subdomain.

Default value

none

Recommended value

subdomain_inherit = ignore_group_members

8.7.2. Tuning options for IdM clients

pam_id_timeout

This parameter controls how long results from a PAM session will be cached, in order to avoid excessive round-trips to the identity provider during an identity lookup. The default value of 5 seconds might not be enough in environments where complex group memberships are populated on the IdM Server and IdM client side. Red Hat recommends setting pam_id_timeout to the number of seconds a single un-cached login takes.

Default value

5

Recommended value

the number of seconds a single un-cached login takes

krb5_auth_timeout

Increasing krb5_auth_timeout allows more time to process complex group information in environments where users are members of a large number of groups. Red Hat recommends setting this value to the number of seconds a single un-cached login takes.

Default value

6

Recommended value

the number of seconds a single un-cached login takes

ldap_deref_threshold

A dereference lookup is a means of fetching all group members in a single LDAP call. The ldap_deref_threshold value specifies the number of group members that must be missing from the internal cache in order to trigger a dereference lookup. If less members are missing, they are looked up individually. Dereference lookups may take a long time in large environments and decrease performance. To disable dereference lookups, set this option to 0.

Default value

10

Recommended value

0

8.8. Additional resources

Legal Notice

Copyright © 2022 Red Hat, Inc.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.