4.8. Customized Reporting for LVM

LVM provides a wide range of configuration and command line options to produce customized reports and to filter the report's output. For a full description of LVM reporting features and capabilities, see the lvmreport(7) man page.
You can produce concise and customizable reports of LVM objects with the pvs, lvs, and vgs commands. The reports that these commands generate include one line of output for each object. Each line contains an ordered list of fields of properties related to the object. There are five ways to select the objects to be reported: by physical volume, volume group, logical volume, physical volume segment, and logical volume segment.
As of the Red Hat Enterprise Linux 7.3 release, you can report information about physical volumes, volume groups, logical volumes, physical volume segments, and logical volume segments all at once with the lvm fullreport command. For information on this command and its capabilities, see the lvm-fullreport(8) man page.
As of the Red Hat Enterprise Linux 7.3 release, LVM supports log reports, which contain a log of operations, messages, and per-object status with complete object identification collected during LVM command execution. For an example of an LVM log report, see Section 4.8.6, “Command Log Reporting (Red Hat Enterprise Linux 7.3 and later)”. For further information about the LVM log report. see the lvmreport(7) man page.
The following sections provide summary information on the use of the pvs, lvs, and vgs commands to customize a report:

4.8.1. Format Control

Whether you use the pvs, lvs, or vgs command determines the default set of fields displayed and the sort order. You can control the output of these commands with the following arguments:
  • You can change what fields are displayed to something other than the default by using the -o argument. For example, the following output is the default display for the pvs command (which displays information about physical volumes).
    # pvs
      PV         VG     Fmt  Attr PSize  PFree
      /dev/sdb1  new_vg lvm2 a-   17.14G 17.14G
      /dev/sdc1  new_vg lvm2 a-   17.14G 17.09G
      /dev/sdd1  new_vg lvm2 a-   17.14G 17.14G
    
    The following command displays only the physical volume name and size.
    # pvs -o pv_name,pv_size
      PV         PSize
      /dev/sdb1  17.14G
      /dev/sdc1  17.14G
      /dev/sdd1  17.14G
    
  • You can append a field to the output with the plus sign (+), which is used in combination with the -o argument.
    The following example displays the UUID of the physical volume in addition to the default fields.
    # pvs -o +pv_uuid
      PV         VG     Fmt  Attr PSize  PFree  PV UUID
      /dev/sdb1  new_vg lvm2 a-   17.14G 17.14G onFF2w-1fLC-ughJ-D9eB-M7iv-6XqA-dqGeXY
      /dev/sdc1  new_vg lvm2 a-   17.14G 17.09G Joqlch-yWSj-kuEn-IdwM-01S9-X08M-mcpsVe
      /dev/sdd1  new_vg lvm2 a-   17.14G 17.14G yvfvZK-Cf31-j75k-dECm-0RZ3-0dGW-UqkCS
    
  • Adding the -v argument to a command includes some extra fields. For example, the pvs -v command will display the DevSize and PV UUID fields in addition to the default fields.
    # pvs -v
        Scanning for physical volume names
      PV         VG     Fmt  Attr PSize  PFree  DevSize PV UUID
      /dev/sdb1  new_vg lvm2 a-   17.14G 17.14G  17.14G onFF2w-1fLC-ughJ-D9eB-M7iv-6XqA-dqGeXY
      /dev/sdc1  new_vg lvm2 a-   17.14G 17.09G  17.14G Joqlch-yWSj-kuEn-IdwM-01S9-XO8M-mcpsVe
      /dev/sdd1  new_vg lvm2 a-   17.14G 17.14G  17.14G yvfvZK-Cf31-j75k-dECm-0RZ3-0dGW-tUqkCS
    
  • The --noheadings argument suppresses the headings line. This can be useful for writing scripts.
    The following example uses the --noheadings argument in combination with the pv_name argument, which will generate a list of all physical volumes.
    # pvs --noheadings -o pv_name
      /dev/sdb1
      /dev/sdc1
      /dev/sdd1
    
  • The --separator separator argument uses separator to separate each field.
    The following example separates the default output fields of the pvs command with an equals sign (=).
    # pvs --separator =
      PV=VG=Fmt=Attr=PSize=PFree
      /dev/sdb1=new_vg=lvm2=a-=17.14G=17.14G
      /dev/sdc1=new_vg=lvm2=a-=17.14G=17.09G
      /dev/sdd1=new_vg=lvm2=a-=17.14G=17.14G
    
    To keep the fields aligned when using the separator argument, use the separator argument in conjunction with the --aligned argument.
    # pvs --separator = --aligned
      PV        =VG    =Fmt =Attr=PSize =PFree
      /dev/sdb1 =new_vg=lvm2=a-  =17.14G=17.14G
      /dev/sdc1 =new_vg=lvm2=a-  =17.14G=17.09G
      /dev/sdd1 =new_vg=lvm2=a-  =17.14G=17.14G
    
You can use the -P argument of the lvs or vgs command to display information about a failed volume that would otherwise not appear in the output. For information on the output this argument yields, see Section 6.2, “Displaying Information on Failed Devices”.
For a full listing of display arguments, see the pvs(8), vgs(8) and lvs(8) man pages.
Volume group fields can be mixed with either physical volume (and physical volume segment) fields or with logical volume (and logical volume segment) fields, but physical volume and logical volume fields cannot be mixed. For example, the following command will display one line of output for each physical volume.
# vgs -o +pv_name
  VG     #PV #LV #SN Attr   VSize  VFree  PV
  new_vg   3   1   0 wz--n- 51.42G 51.37G /dev/sdc1
  new_vg   3   1   0 wz--n- 51.42G 51.37G /dev/sdd1
  new_vg   3   1   0 wz--n- 51.42G 51.37G /dev/sdb1

4.8.2. Object Display Fields

This section provides a series of tables that list the information you can display about the LVM objects with the pvs, vgs, and lvs commands.
For convenience, a field name prefix can be dropped if it matches the default for the command. For example, with the pvs command, name means pv_name, but with the vgs command, name is interpreted as vg_name.
Executing the following command is the equivalent of executing pvs -o pv_free.
# pvs -o free
  PFree
  17.14G
  17.09G
  17.14G

Note

The number of characters in the attribute fields in pvs, vgs, and lvs output may increase in later releases. The existing character fields will not change position, but new fields may be added to the end. You should take this into account when writing scripts that search for particular attribute characters, searching for the character based on its relative position to the beginning of the field, but not for its relative position to the end of the field. For example, to search for the character p in the ninth bit of the lv_attr field, you could search for the string "^/........p/", but you should not search for the string "/*p$/".

The pvs Command

Table 4.3, “The pvs Command Display Fields” lists the display arguments of the pvs command, along with the field name as it appears in the header display and a description of the field.

Table 4.3. The pvs Command Display Fields

ArgumentHeaderDescription
dev_sizeDevSize The size of the underlying device on which the physical volume was created
pe_start1st PE Offset to the start of the first physical extent in the underlying device
pv_attrAttr Status of the physical volume: (a)llocatable or e(x)ported.
pv_fmtFmt The metadata format of the physical volume (lvm2 or lvm1)
pv_freePFree The free space remaining on the physical volume
pv_namePV The physical volume name
pv_pe_alloc_countAlloc Number of used physical extents
pv_pe_countPE Number of physical extents
pvseg_sizeSSize The segment size of the physical volume
pvseg_startStart The starting physical extent of the physical volume segment
pv_sizePSize The size of the physical volume
pv_tagsPV Tags LVM tags attached to the physical volume
pv_usedUsed The amount of space currently used on the physical volume
pv_uuidPV UUID The UUID of the physical volume
The pvs command displays the following fields by default: pv_name, vg_name, pv_fmt, pv_attr, pv_size, pv_free. The display is sorted by pv_name.
# pvs
  PV         VG     Fmt  Attr PSize  PFree
  /dev/sdb1  new_vg lvm2 a-   17.14G 17.14G
  /dev/sdc1  new_vg lvm2 a-   17.14G 17.09G
  /dev/sdd1  new_vg lvm2 a-   17.14G 17.13G
Using the -v argument with the pvs command adds the following fields to the default display: dev_size, pv_uuid.
# pvs -v
    Scanning for physical volume names
  PV         VG     Fmt  Attr PSize  PFree  DevSize PV UUID
  /dev/sdb1  new_vg lvm2 a-   17.14G 17.14G  17.14G onFF2w-1fLC-ughJ-D9eB-M7iv-6XqA-dqGeXY
  /dev/sdc1  new_vg lvm2 a-   17.14G 17.09G  17.14G Joqlch-yWSj-kuEn-IdwM-01S9-XO8M-mcpsVe
  /dev/sdd1  new_vg lvm2 a-   17.14G 17.13G  17.14G yvfvZK-Cf31-j75k-dECm-0RZ3-0dGW-tUqkCS
You can use the --segments argument of the pvs command to display information about each physical volume segment. A segment is a group of extents. A segment view can be useful if you want to see whether your logical volume is fragmented.
The pvs --segments command displays the following fields by default: pv_name, vg_name, pv_fmt, pv_attr, pv_size, pv_free, pvseg_start, pvseg_size. The display is sorted by pv_name and pvseg_size within the physical volume.
# pvs --segments
  PV         VG         Fmt  Attr PSize  PFree  Start SSize
  /dev/hda2  VolGroup00 lvm2 a-   37.16G 32.00M     0  1172
  /dev/hda2  VolGroup00 lvm2 a-   37.16G 32.00M  1172    16
  /dev/hda2  VolGroup00 lvm2 a-   37.16G 32.00M  1188     1
  /dev/sda1  vg         lvm2 a-   17.14G 16.75G     0    26
  /dev/sda1  vg         lvm2 a-   17.14G 16.75G    26    24
  /dev/sda1  vg         lvm2 a-   17.14G 16.75G    50    26
  /dev/sda1  vg         lvm2 a-   17.14G 16.75G    76    24
  /dev/sda1  vg         lvm2 a-   17.14G 16.75G   100    26
  /dev/sda1  vg         lvm2 a-   17.14G 16.75G   126    24
  /dev/sda1  vg         lvm2 a-   17.14G 16.75G   150    22
  /dev/sda1  vg         lvm2 a-   17.14G 16.75G   172  4217
  /dev/sdb1  vg         lvm2 a-   17.14G 17.14G     0  4389
  /dev/sdc1  vg         lvm2 a-   17.14G 17.14G     0  4389
  /dev/sdd1  vg         lvm2 a-   17.14G 17.14G     0  4389
  /dev/sde1  vg         lvm2 a-   17.14G 17.14G     0  4389
  /dev/sdf1  vg         lvm2 a-   17.14G 17.14G     0  4389
  /dev/sdg1  vg         lvm2 a-   17.14G 17.14G     0  4389
You can use the pvs -a command to see devices detected by LVM that have not been initialized as LVM physical volumes.
# pvs -a
  PV                             VG     Fmt  Attr PSize  PFree
  /dev/VolGroup00/LogVol01                   --       0      0
  /dev/new_vg/lvol0                          --       0      0
  /dev/ram                                   --       0      0
  /dev/ram0                                  --       0      0
  /dev/ram2                                  --       0      0
  /dev/ram3                                  --       0      0
  /dev/ram4                                  --       0      0
  /dev/ram5                                  --       0      0
  /dev/ram6                                  --       0      0
  /dev/root                                  --       0      0
  /dev/sda                                   --       0      0
  /dev/sdb                                   --       0      0
  /dev/sdb1                      new_vg lvm2 a-   17.14G 17.14G
  /dev/sdc                                   --       0      0
  /dev/sdc1                      new_vg lvm2 a-   17.14G 17.09G
  /dev/sdd                                   --       0      0
  /dev/sdd1                      new_vg lvm2 a-   17.14G 17.14G

The vgs Command

Table 4.4, “vgs Display Fields” lists the display arguments of the vgs command, along with the field name as it appears in the header display and a description of the field.

Table 4.4. vgs Display Fields

ArgumentHeaderDescription
lv_count#LV The number of logical volumes the volume group contains
max_lvMaxLV The maximum number of logical volumes allowed in the volume group (0 if unlimited)
max_pvMaxPV The maximum number of physical volumes allowed in the volume group (0 if unlimited)
pv_count#PV The number of physical volumes that define the volume group
snap_count#SN The number of snapshots the volume group contains
vg_attrAttr Status of the volume group: (w)riteable, (r)eadonly, resi(z)eable, e(x)ported, (p)artial and (c)lustered.
vg_extent_count#Ext The number of physical extents in the volume group
vg_extent_sizeExt The size of the physical extents in the volume group
vg_fmtFmt The metadata format of the volume group (lvm2 or lvm1)
vg_freeVFree Size of the free space remaining in the volume group
vg_free_countFree Number of free physical extents in the volume group
vg_nameVG The volume group name
vg_seqnoSeq Number representing the revision of the volume group
vg_sizeVSize The size of the volume group
vg_sysidSYS ID LVM1 System ID
vg_tagsVG Tags LVM tags attached to the volume group
vg_uuidVG UUID The UUID of the volume group
The vgs command displays the following fields by default: vg_name, pv_count, lv_count, snap_count, vg_attr, vg_size, vg_free. The display is sorted by vg_name.
# vgs
  VG     #PV #LV #SN Attr   VSize  VFree
  new_vg   3   1   1 wz--n- 51.42G 51.36G
Using the -v argument with the vgs command adds the following fields to the default display: vg_extent_size, vg_uuid.
# vgs -v
    Finding all volume groups
    Finding volume group "new_vg"
  VG     Attr   Ext   #PV #LV #SN VSize  VFree  VG UUID
  new_vg wz--n- 4.00M   3   1   1 51.42G 51.36G jxQJ0a-ZKk0-OpMO-0118-nlwO-wwqd-fD5D32

The lvs Command

Table 4.5, “lvs Display Fields” lists the display arguments of the lvs command, along with the field name as it appears in the header display and a description of the field.

Note

In later releases of Red Hat Enterprise Linux, the output of the lvs command may differ, with additional fields in the output. The order of the fields, however, will remain the same and any additional fields will appear at the end of the display.

Table 4.5. lvs Display Fields

ArgumentHeaderDescription
chunksize
chunk_size
Chunk Unit size in a snapshot volume
copy_percentCopy% The synchronization percentage of a mirrored logical volume; also used when physical extents are being moved with the pv_move command
devicesDevices The underlying devices that make up the logical volume: the physical volumes, logical volumes, and start physical extents and logical extents
lv_ancestorsAncestors (Red Hat Enterprise Linux 7.2 and later) For thin pool snapshots, the ancestors of the logical volume
lv_descendantsDescendants (Red Hat Enterprise Linux 7.2 and later) For thin pool snapshots, the descendants of the logical volume
lv_attrAttr The status of the logical volume. The logical volume attribute bits are as follows:
Bit 1: Volume type: (m)irrored, (M)irrored without initial sync, (o)rigin, (O)rigin with merging snapshot, (r)aid, (R)aid without initial sync, (s)napshot, merging (S)napshot, (p)vmove, (v)irtual, mirror or raid (i)mage, mirror or raid (I)mage out-of-sync, mirror (l)og device, under (c)onversion, thin (V)olume, (t)hin pool, (T)hin pool data, raid or thin pool m(e)tadata or pool metadata spare,
Bit 2: Permissions: (w)riteable, (r)ead-only, (R)ead-only activation of non-read-only volume
Bit 3: Allocation policy: (a)nywhere, (c)ontiguous, (i)nherited, c(l)ing, (n)ormal. This is capitalized if the volume is currently locked against allocation changes, for example while executing the pvmove command.
Bit 4: fixed (m)inor
Bit 5: State: (a)ctive, (s)uspended, (I)nvalid snapshot, invalid (S)uspended snapshot, snapshot (m)erge failed, suspended snapshot (M)erge failed, mapped (d)evice present without tables, mapped device present with (i)nactive table
Bit 6: device (o)pen
Bit 7: Target type: (m)irror, (r)aid, (s)napshot, (t)hin, (u)nknown, (v)irtual. This groups logical volumes related to the same kernel target together. So, for example, mirror images, mirror logs as well as mirrors themselves appear as (m) if they use the original device-mapper mirror kernel driver, whereas the raid equivalents using the md raid kernel driver all appear as (r). Snapshots using the original device-mapper driver appear as (s), whereas snapshots of thin volumes using the thin provisioning driver appear as (t).
Bit 8: Newly-allocated data blocks are overwritten with blocks of (z)eroes before use.
Bit 9: Volume Health: (p)artial, (r)efresh needed, (m)ismatches exist, (w)ritemostly. (p)artial signifies that one or more of the Physical Volumes this Logical Volume uses is missing from the system. (r)efresh signifies that one or more of the Physical Volumes this RAID Logical Volume uses had suffered a write error. The write error could be due to a temporary failure of that Physical Volume or an indication that it is failing. The device should be refreshed or replaced. (m)ismatches signifies that the RAID logical volume has portions of the array that are not coherent. Inconsistencies are discovered by initiating a check operation on a RAID logical volume. (The scrubbing operations, check and repair, can be performed on a RAID Logical Volume by means of the lvchange command.) (w)ritemostly signifies the devices in a RAID 1 logical volume that have been marked write-mostly.
Bit 10: s(k)ip activation: this volume is flagged to be skipped during activation.
lv_kernel_majorKMaj Actual major device number of the logical volume (-1 if inactive)
lv_kernel_minorKMIN Actual minor device number of the logical volume (-1 if inactive)
lv_majorMaj The persistent major device number of the logical volume (-1 if not specified)
lv_minorMin The persistent minor device number of the logical volume (-1 if not specified)
lv_nameLV The name of the logical volume
lv_sizeLSize The size of the logical volume
lv_tagsLV Tags LVM tags attached to the logical volume
lv_uuidLV UUID The UUID of the logical volume.
mirror_logLog Device on which the mirror log resides
modulesModules Corresponding kernel device-mapper target necessary to use this logical volume
move_pvMove Source physical volume of a temporary logical volume created with the pvmove command
originOrigin The origin device of a snapshot volume
regionsize
region_size
Region The unit size of a mirrored logical volume
seg_count#Seg The number of segments in the logical volume
seg_sizeSSize The size of the segments in the logical volume
seg_startStart Offset of the segment in the logical volume
seg_tagsSeg Tags LVM tags attached to the segments of the logical volume
segtypeType The segment type of a logical volume (for example: mirror, striped, linear)
snap_percentSnap% Current percentage of a snapshot volume that is in use
stripes#Str Number of stripes or mirrors in a logical volume
stripesize
stripe_size
Stripe Unit size of the stripe in a striped logical volume
The lvs command displays the following fields by default: lv_name, vg_name, lv_attr, lv_size, origin, snap_percent, move_pv, mirror_log, copy_percent, convert_lv. The default display is sorted by vg_name and lv_name within the volume group.
# lvs
  LV         VG     Attr   LSize  Origin Snap%  Move Log Copy%  Convert
  lvol0      new_vg owi-a- 52.00M
  newvgsnap1 new_vg swi-a-  8.00M lvol0    0.20
Using the -v argument with the lvs command adds the following fields to the default display: seg_count, lv_major, lv_minor, lv_kernel_major, lv_kernel_minor, lv_uuid.
# lvs -v
    Finding all logical volumes
  LV         VG     #Seg Attr   LSize  Maj Min KMaj KMin Origin Snap%  Move Copy%  Log Convert LV UUID
  lvol0      new_vg    1 owi-a- 52.00M  -1  -1 253  3                                          LBy1Tz-sr23-OjsI-LT03-nHLC-y8XW-EhCl78
  newvgsnap1 new_vg    1 swi-a-  8.00M  -1  -1 253  5    lvol0    0.20                         1ye1OU-1cIu-o79k-20h2-ZGF0-qCJm-CfbsIx
You can use the --segments argument of the lvs command to display information with default columns that emphasize the segment information. When you use the segments argument, the seg prefix is optional. The lvs --segments command displays the following fields by default: lv_name, vg_name, lv_attr, stripes, segtype, seg_size. The default display is sorted by vg_name, lv_name within the volume group, and seg_start within the logical volume. If the logical volumes were fragmented, the output from this command would show that.
# lvs --segments
  LV       VG         Attr   #Str Type   SSize
  LogVol00 VolGroup00 -wi-ao    1 linear  36.62G
  LogVol01 VolGroup00 -wi-ao    1 linear 512.00M
  lv       vg         -wi-a-    1 linear 104.00M
  lv       vg         -wi-a-    1 linear 104.00M
  lv       vg         -wi-a-    1 linear 104.00M
  lv       vg         -wi-a-    1 linear  88.00M
Using the -v argument with the lvs --segments command adds the following fields to the default display: seg_start, stripesize, chunksize.
# lvs -v --segments
    Finding all logical volumes
  LV         VG     Attr   Start SSize  #Str Type   Stripe Chunk
  lvol0      new_vg owi-a-    0  52.00M    1 linear     0     0
  newvgsnap1 new_vg swi-a-    0   8.00M    1 linear     0  8.00K
The following example shows the default output of the lvs command on a system with one logical volume configured, followed by the default output of the lvs command with the segments argument specified.
# lvs
  LV    VG     Attr   LSize  Origin Snap%  Move Log Copy%
  lvol0 new_vg -wi-a- 52.00M
# lvs --segments
  LV    VG     Attr   #Str Type   SSize
  lvol0 new_vg -wi-a-    1 linear 52.00M

4.8.3. Sorting LVM Reports

Normally the entire output of the lvs, vgs, or pvs command has to be generated and stored internally before it can be sorted and columns aligned correctly. You can specify the --unbuffered argument to display unsorted output as soon as it is generated.
To specify an alternative ordered list of columns to sort on, use the -O argument of any of the reporting commands. It is not necessary to include these fields within the output itself.
The following example shows the output of the pvs command that displays the physical volume name, size, and free space.
# pvs -o pv_name,pv_size,pv_free
  PV         PSize  PFree
  /dev/sdb1  17.14G 17.14G
  /dev/sdc1  17.14G 17.09G
  /dev/sdd1  17.14G 17.14G
The following example shows the same output, sorted by the free space field.
# pvs -o pv_name,pv_size,pv_free -O pv_free
  PV         PSize  PFree
  /dev/sdc1  17.14G 17.09G
  /dev/sdd1  17.14G 17.14G
  /dev/sdb1  17.14G 17.14G
The following example shows that you do not need to display the field on which you are sorting.
# pvs -o pv_name,pv_size -O pv_free
  PV         PSize
  /dev/sdc1  17.14G
  /dev/sdd1  17.14G
  /dev/sdb1  17.14G
To display a reverse sort, precede a field you specify after the -O argument with the - character.
# pvs -o pv_name,pv_size,pv_free -O -pv_free
  PV         PSize  PFree
  /dev/sdd1  17.14G 17.14G
  /dev/sdb1  17.14G 17.14G
  /dev/sdc1  17.14G 17.09G

4.8.4. Specifying Units

To specify the unit for the LVM report display, use the --units argument of the report command. You can specify (b)ytes, (k)ilobytes, (m)egabytes, (g)igabytes, (t)erabytes, (e)xabytes, (p)etabytes, and (h)uman-readable. The default display is human-readable. You can override the default by setting the units parameter in the global section of the lvm.conf file.
The following example specifies the output of the pvs command in megabytes rather than the default gigabytes.
# pvs --units m
  PV         VG     Fmt  Attr PSize     PFree
  /dev/sda1         lvm2 --   17555.40M 17555.40M
  /dev/sdb1  new_vg lvm2 a-   17552.00M 17552.00M
  /dev/sdc1  new_vg lvm2 a-   17552.00M 17500.00M
  /dev/sdd1  new_vg lvm2 a-   17552.00M 17552.00M
By default, units are displayed in powers of 2 (multiples of 1024). You can specify that units be displayed in multiples of 1000 by capitalizing the unit specification (B, K, M, G, T, H).
The following command displays the output as a multiple of 1024, the default behavior.
# pvs
  PV         VG     Fmt  Attr PSize  PFree
  /dev/sdb1  new_vg lvm2 a-   17.14G 17.14G
  /dev/sdc1  new_vg lvm2 a-   17.14G 17.09G
  /dev/sdd1  new_vg lvm2 a-   17.14G 17.14G
The following command displays the output as a multiple of 1000.
#  pvs --units G
  PV         VG     Fmt  Attr PSize  PFree
  /dev/sdb1  new_vg lvm2 a-   18.40G 18.40G
  /dev/sdc1  new_vg lvm2 a-   18.40G 18.35G
  /dev/sdd1  new_vg lvm2 a-   18.40G 18.40G
You can also specify (s)ectors (defined as 512 bytes) or custom units.
The following example displays the output of the pvs command as a number of sectors.
# pvs --units s
  PV         VG     Fmt  Attr PSize     PFree
  /dev/sdb1  new_vg lvm2 a-   35946496S 35946496S
  /dev/sdc1  new_vg lvm2 a-   35946496S 35840000S
  /dev/sdd1  new_vg lvm2 a-   35946496S 35946496S
The following example displays the output of the pvs command in units of 4 MB.
# pvs --units 4m
  PV         VG     Fmt  Attr PSize    PFree
  /dev/sdb1  new_vg lvm2 a-   4388.00U 4388.00U
  /dev/sdc1  new_vg lvm2 a-   4388.00U 4375.00U
  /dev/sdd1  new_vg lvm2 a-   4388.00U 4388.00U

4.8.5. JSON Format Output (Red Hat Enterprise Linux 7.3 and later)

As of Red Hat Enterprise Linux 7.3, you can use the --reportformat option of the LVM display commands to display the output in JSON format.
The following example shows the output of the lvs in standard default format.
# lvs
  LV      VG            Attr       LSize   Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  my_raid my_vg         Rwi-a-r---  12.00m                                    100.00
  root    rhel_host-075 -wi-ao----   6.67g
  swap    rhel_host-075 -wi-ao---- 820.00m
The following command shows the output of the same LVM configuration when you specify JSON format.
# lvs --reportformat json
  {
      "report": [
          {
              "lv": [
                  {"lv_name":"my_raid", "vg_name":"my_vg", "lv_attr":"Rwi-a-r---", "lv_size":"12.00m", "pool_lv":"", "origin":"", "data_percent":"", "metadata_percent":"", "move_pv":"", "mirror_log":"", "copy_percent":"100.00", "convert_lv":""},
                  {"lv_name":"root", "vg_name":"rhel_host-075", "lv_attr":"-wi-ao----", "lv_size":"6.67g", "pool_lv":"", "origin":"", "data_percent":"", "metadata_percent":"", "move_pv":"", "mirror_log":"", "copy_percent":"", "convert_lv":""},
                  {"lv_name":"swap", "vg_name":"rhel_host-075", "lv_attr":"-wi-ao----", "lv_size":"820.00m", "pool_lv":"", "origin":"", "data_percent":"", "metadata_percent":"", "move_pv":"", "mirror_log":"", "copy_percent":"", "convert_lv":""}
              ]
          }
      ]
  }
You can also set the report format as a configuration option in the /etc/lvm/lvm.conf file, using the output_format setting. The --reportformat setting of the command line, however, takes precedence over this setting.

4.8.6. Command Log Reporting (Red Hat Enterprise Linux 7.3 and later)

As of Red Hat Enterprise Linux 7.3, both report-oriented and processing-oriented LVM commands can report the command log if this is enabled with the log/report_command_log configuration setting. You can determine the set of fields to display and to sort by for this report.
The following examples configures LVM to generate a complete log report for LVM commands. In this example, you can see that both logical volumes lvol0 and lvol1 were successfully processed, as was the volume group VG that contains the volumes.
# lvmconfig --type full log/command_log_selection
command_log_selection="all"

# lvs
  Logical Volume
  ==============
  LV    LSize Cpy%Sync
  lvol1 4.00m 100.00
  lvol0 4.00m

  Command Log
  ===========
  Seq LogType Context    ObjType ObjName ObjGrp  Msg     Errno RetCode
    1 status  processing lv      lvol0   vg      success     0       1
    2 status  processing lv      lvol1   vg      success     0       1
    3 status  processing vg      vg              success     0       1

# lvchange -an vg/lvol1
  Command Log
  ===========
  Seq LogType Context    ObjType ObjName ObjGrp  Msg     Errno RetCode
    1 status  processing lv      lvol1   vg      success     0       1
    2 status  processing vg      vg              success     0       1
For further information on configuring LVM reports and command logs, see the lvmreport man page.