Red Hat Training

A Red Hat training course is available for Red Hat Enterprise Linux

4.2. APC Power Switch over SNMP

Table 4.3, “APC Power Switch over SNMP” lists the fence device parameters used by fence_apc_snmp, the fence agent for APC that logs into the SNP device by means of the SNMP protocol.

Table 4.3. APC Power Switch over SNMP

luci Field cluster.conf Attribute Description
Name name A name for the APC device connected to the cluster into which the fence daemon logs by means of the SNMP protocol.
IP Address or Hostname ipaddr The IP address or host name assigned to the device.
UDP/TCP port udpport The UDP/TCP port to use for connection with the device; the default value is 161.
Login login The login name used to access the device.
Password passwd The password used to authenticate the connection to the device.
Password Script (optional) passwd_script The script that supplies a password for access to the fence device. Using this supersedes the Password parameter.
SNMP Version snmp_version The SNMP version to use (1, 2c, 3); the default value is 1.
SNMP Community community The SNMP community string; the default value is private.
SNMP Security Level snmp_sec_level The SNMP security level (noAuthNoPriv, authNoPriv, authPriv).
SNMP Authentication Protocol snmp_auth_prot The SNMP authentication protocol (MD5, SHA).
SNMP Privacy Protocol snmp_priv_prot The SNMP privacy protocol (DES, AES).
SNMP Privacy Protocol Password snmp_priv_passwd The SNMP privacy protocol password.
SNMP Privacy Protocol Script snmp_priv_passwd_script The script that supplies a password for SNMP privacy protocol. Using this supersedes the SNMP privacy protocol password parameter.
Power Wait (seconds) power_wait Number of seconds to wait after issuing a power off or power on command.
Power Timeout (seconds) power_timeout Number of seconds to continue testing for a status change after issuing a power off or power on command. The default value is 20.
Shell Timeout (seconds) shell_timeout Number of seconds to wait for a command prompt after issuing a command. The default value is 3.
Login Timeout (seconds) login_timeout Number of seconds to wait for a command prompt after login. The default value is 5.
Times to Retry Power On Operation retry_on Number of attempts to retry a power on operation. The default value is 1.
Port (Outlet) Number port The port.
Delay (optional) delay The number of seconds to wait before fencing is started. The default value is 0.
Figure 4.2, “APC Power Switch over SNMP” shows the configuration screen for adding an APC Power Switch fence device.
APC Power Switch over SNMP

Figure 4.2. APC Power Switch over SNMP

The following is the cluster.conf entry for the fence_apc_snmp device:

  <fencedevice agent="fence_apc_snmp" community="private" ipaddr="" login="root" \
    name="apcpwsnmptst1" passwd="password123" power_wait="60" snmp_priv_passwd="password123"/>