You can also use the network/netmask directives format for
route-interface files. The following is a template for the network/netmask format, with instructions following afterwards:
ADDRESS0=10.10.10.0 is the network address of the remote network or host to be reached.
NETMASK0=255.255.255.0 is the netmask for the network address defined with
GATEWAY0=192.168.1.1 is the default gateway, or an
IP address that can be used to reach
The following is an example of a
route-interface file using the network/netmask directives format. The default gateway is
192.168.0.1 but a leased line or WAN connection is available at
192.168.0.10. The two static routes are for reaching the
Subsequent static routes must be numbered sequentially, and must not skip any values. For example,
ADDRESS2, and so on.