2.2. Man Pages

This section lists man pages that are relevant to Red Hat Cluster Suite, as an additional resource.
  • Cluster Infrastructure
    • ccs_tool (8) - The tool used to make online updates of CCS config files
    • ccs_test (8) - The diagnostic tool for a running Cluster Configuration System
    • ccsd (8) - The daemon used to access CCS cluster configuration files
    • ccs (7) - Cluster Configuration System
    • cman_tool (8) - Cluster Management Tool
    • cluster.conf [cluster] (5) - The configuration file for cluster products
    • qdisk (5) - a disk-based quorum daemon for CMAN / Linux-Cluster
    • mkqdisk (8) - Cluster Quorum Disk Utility
    • qdiskd (8) - Cluster Quorum Disk Daemon
    • fence_ack_manual (8) - program run by an operator as a part of manual I/O Fencing
    • fence_apc (8) - I/O Fencing agent for APC MasterSwitch
    • fence_bladecenter (8) - I/O Fencing agent for IBM Bladecenter
    • fence_brocade (8) - I/O Fencing agent for Brocade FC switches
    • fence_bullpap (8) - I/O Fencing agent for Bull FAME architecture controlled by a PAP management console
    • fence_drac (8) - fencing agent for Dell Remote Access Card
    • fence_egenera (8) - I/O Fencing agent for the Egenera BladeFrame
    • fence_gnbd (8) - I/O Fencing agent for GNBD-based GFS clusters
    • fence_ilo (8) - I/O Fencing agent for HP Integrated Lights Out card
    • fence_ipmilan (8) - I/O Fencing agent for machines controlled by IPMI over LAN
    • fence_manual (8) - program run by fenced as a part of manual I/O Fencing
    • fence_mcdata (8) - I/O Fencing agent for McData FC switches
    • fence_node (8) - A program which performs I/O fencing on a single node
    • fence_rib (8) - I/O Fencing agent for Compaq Remote Insight Lights Out card
    • fence_rsa (8) - I/O Fencing agent for IBM RSA II
    • fence_sanbox2 (8) - I/O Fencing agent for QLogic SANBox2 FC switches
    • fence_scsi (8) - I/O fencing agent for SCSI persistent reservations
    • fence_tool (8) - A program to join and leave the fence domain
    • fence_vixel (8) - I/O Fencing agent for Vixel FC switches
    • fence_wti (8) - I/O Fencing agent for WTI Network Power Switch
    • fence_xvm (8) - I/O Fencing agent for Xen virtual machines
    • fence_xvmd (8) - I/O Fencing agent host for Xen virtual machines
    • fenced (8) - the I/O Fencing daemon
  • High-availability Service Management
    • clusvcadm (8) - Cluster User Service Administration Utility
    • clustat (8) - Cluster Status Utility
    • Clurgmgrd [clurgmgrd] (8) - Resource Group (Cluster Service) Manager Daemon
    • clurmtabd (8) - Cluster NFS Remote Mount Table Daemon
  • GFS
    • gfs_fsck (8) - Offline GFS file system checker
    • gfs_grow (8) - Expand a GFS filesystem
    • gfs_jadd (8) - Add journals to a GFS filesystem
    • gfs_mount (8) - GFS mount options
    • gfs_quota (8) - Manipulate GFS disk quotas
    • gfs_tool (8) - interface to gfs ioctl calls
  • Cluster Logical Volume Manager
    • clvmd (8) - cluster LVM daemon
    • lvm (8) - LVM2 tools
    • lvm.conf [lvm] (5) - Configuration file for LVM2
    • lvmchange (8) - change attributes of the logical volume manager
    • pvcreate (8) - initialize a disk or partition for use by LVM
    • lvs (8) - report information about logical volumes
  • Global Network Block Device
    • gnbd_export (8) - the interface to export GNBDs
    • gnbd_import (8) - manipulate GNBD block devices on a client
    • gnbd_serv (8) - gnbd server daemon
  • LVS
    • pulse (8) - heartbeating daemon for monitoring the health of cluster nodes
    • lvs.cf [lvs] (5) - configuration file for lvs
    • lvscan (8) - scan (all disks) for logical volumes
    • lvsd (8) - daemon to control the Red Hat clustering services
    • ipvsadm (8) - Linux Virtual Server administration
    • ipvsadm-restore (8) - restore the IPVS table from stdin
    • ipvsadm-save (8) - save the IPVS table to stdout
    • nanny (8) - tool to monitor status of services in a cluster
    • send_arp (8) - tool to notify network of a new IP address / MAC address mapping