Language:
Format:

Chapter 10. Troubleshooting Ceph objects

As a storage administrator, you can use the ceph-objectstore-tool utility to perform high-level or low-level object operations. The ceph-objectstore-tool utility can help you troubleshoot problems related to objects within a particular OSD or placement group.

You can also start OSD containers in rescue/maintenance mode to repair OSDs without installing Ceph packages on the OSD node.

Important

Manipulating objects can cause unrecoverable data loss. Contact Red Hat support before using the ceph-objectstore-tool utility.

10.1. Prerequisites

Verify there are no network-related issues.

10.2. Troubleshooting Ceph objects in a containerized environment

The OSD container can be started in rescue/maintenance mode to repair OSDs in Red Hat Ceph Storage 4 without installing Ceph packages on the OSD node.

You can use ceph-bluestore-tool to run consistency check with fsck command, or to run consistency check and repair any errors with repair command.

Important

This procedure is specific to containerized deployments only. Skip this section for bare-metal deployments

Prerequisites

A running Red Hat Ceph Storage cluster.
Root-level access to the Ceph OSD node.
Stopping the ceph-osd daemon.

Procedure

Set noout flag on cluster.
Example
```
[root@mon ~]# ceph osd set noout
```
Login to the node hosting the OSD container.

Backup /etc/systemd/system/ceph-osd@.service unit file to /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.backup

Move /run/ceph-osd@OSD_ID.service-cid file to /root.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /root
```

Edit /etc/systemd/system/ceph-osd@.service unit file and add -it --entrypoint /bin/bash option to podman command.

Example

# Please do not change this file directly since it is managed by Ansible and will be overwritten
[Unit]
Description=Ceph OSD
After=network.target

[Service]
EnvironmentFile=-/etc/environment
ExecStartPre=-/usr/bin/rm -f /%t/%n-pid /%t/%n-cid
ExecStartPre=-/usr/bin/podman rm -f ceph-osd-%i
ExecStart=/usr/bin/podman run -it --entrypoint /bin/bash \
  -d --conmon-pidfile /%t/%n-pid --cidfile /%t/%n-cid \
  --rm \
  --net=host \
  --privileged=true \
  --pid=host \
  --ipc=host \
  --cpus=2 \
  -v /dev:/dev \
  -v /etc/localtime:/etc/localtime:ro \
  -v /var/lib/ceph:/var/lib/ceph:z \
  -v /etc/ceph:/etc/ceph:z \
  -v /var/run/ceph:/var/run/ceph:z \
  -v /var/run/udev/:/var/run/udev/ \
  -v /var/log/ceph:/var/log/ceph:z \
  -e OSD_BLUESTORE=1 -e OSD_FILESTORE=0 -e OSD_DMCRYPT=0 \
  -e CLUSTER=ceph \
  -v /run/lvm/:/run/lvm/ \
  -e CEPH_DAEMON=OSD_CEPH_VOLUME_ACTIVATE \
  -e CONTAINER_IMAGE=registry.redhat.io/rhceph/rhceph-4-rhel8:latest \
  -e OSD_ID=%i \
  -e DEBUG=stayalive \
  --name=ceph-osd-%i \
   \
  registry.redhat.io/rhceph/rhceph-4-rhel8:latest
ExecStop=-/usr/bin/sh -c "/usr/bin/podman rm -f `cat /%t/%n-cid`"
KillMode=none
Restart=always
RestartSec=10s
TimeoutStartSec=120
TimeoutStopSec=15
Type=forking
PIDFile=/%t/%n-pid

[Install]
WantedBy=multi-user.target

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Restart the OSD service associated with the OSD_ID.
Syntax
```
systemctl restart ceph-osd@OSD_ID.service
```
Replace OSD_ID with the ID of the OSD.
Example
```
[root@osd ~]# systemctl restart ceph-osd@0.service
```

Syntax

podman exec -it ceph-osd-OSD_ID /bin/bash

Example

[root@osd ~]# podman exec -it ceph-osd-0 /bin/bash

Get osd fsid and activate the OSD to mount OSD’s logical volume (LV).

Syntax

ceph-volume lvm list |grep -A15 "osd\.OSD_ID"|grep "osd fsid"
ceph-volume lvm activate --bluestore OSD_ID OSD_FSID

Example

[root@osd ~]# ceph-volume lvm list |grep -A15 "osd\.0"|grep "osd fsid"
              osd fsid                  087eee15-6561-40a3-8fe4-9583ba64a4ff
[root@osd ~]# ceph-volume lvm activate --bluestore 0 087eee15-6561-40a3-8fe4-9583ba64a4ff
Running command: /usr/bin/mount -t tmpfs tmpfs /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/ceph-bluestore-tool --cluster=ceph prime-osd-dir --dev /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc --path /var/lib/ceph/osd/ceph-0 --no-mon-config
Running command: /usr/bin/ln -snf /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -h ceph:ceph /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -R ceph:ceph /dev/mapper/ceph--41c69f8f--30e2--4685--9c5c--c605898c5537-osd--data--d073e8b3--0b89--4271--af5b--83045fd000dc
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/systemctl enable ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff
 stderr: Created symlink /etc/systemd/system/multi-user.target.wants/ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff.service → /usr/lib/systemd/system/ceph-volume@.service.
Running command: /usr/bin/systemctl enable --runtime ceph-osd@0
 stderr: Created symlink /run/systemd/system/ceph-osd.target.wants/ceph osd@0.service → /usr/lib/systemd/system/ceph-osd@.service.
Running command: /usr/bin/systemctl start ceph-osd@0
 stderr: Running in chroot, ignoring request: start
--> ceph-volume lvm activate successful for osd ID: 0

Run fsck and repair commands.

Syntax

ceph-bluestore-tool fsck --path /var/lib/ceph/osd/ceph-OSD_ID
ceph-bluestore-tool repair --path /var/lib/ceph/osd/ceph-OSD_ID

Example

[root@osd ~]# ceph-bluestore-tool fsck --path /var/lib/ceph/osd/ceph-0
fsck success

[root@osd ~]# ceph-bluestore-tool repair --path /var/lib/ceph/osd/ceph-0
repair success

After exiting the container, copy /etc/systemd/system/ceph-osd@.service unit file from /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.modified
[root@osd ~]# cp /root/ceph-osd@.service.backup /etc/systemd/system/ceph-osd@.service

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Move /run/ceph-osd@OSD_ID.service-cid file to /tmp.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /tmp
```

Restart the OSD service associated with the OSD_ID.

Syntax

[root@osd ~]# systemctl restart ceph-osd@OSD_ID.service

Example

[root@osd ~]# systemctl restart ceph-osd@0.service

Additional Resources

For more information on stopping an OSD, see the Starting, Stopping, and Restarting the Ceph Daemons by Instance section in the Red Hat Ceph Storage Administration Guide.

10.3. Troubleshooting high-level object operations

As a storage administrator, you can use the ceph-objectstore-tool utility to perform high-level object operations. The ceph-objectstore-tool utility supports the following high-level object operations:

List objects
List lost objects
Fix lost objects

Important

Manipulating objects can cause unrecoverable data loss. Contact Red Hat support before using the ceph-objectstore-tool utility.

10.3.1. Prerequisites

Root-level access to the Ceph OSD nodes.

10.3.2. Listing objects

The OSD can contain zero to many placement groups, and zero to many objects within a placement group (PG). The ceph-objectstore-tool utility allows you to list objects stored within an OSD.

Prerequisites

Root-level access to the Ceph OSD node.
Stopping the ceph-osd daemon.

Procedure

Verify the appropriate OSD is down:

[root@osd ~]# systemctl status ceph-osd@OSD_NUMBER

Example

[root@osd ~]# systemctl status ceph-osd@1

For containerized deployments, to access the bluestore tool, follow the below steps:

Set noout flag on cluster.
Example
```
[root@mon ~]# ceph osd set noout
```
Login to the node hosting the OSD container.

Backup /etc/systemd/system/ceph-osd@.service unit file to /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.backup

Move /run/ceph-osd@OSD_ID.service-cid file to /root.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /root
```

Edit /etc/systemd/system/ceph-osd@.service unit file and add -it --entrypoint /bin/bash option to podman command.

Example

# Please do not change this file directly since it is managed by Ansible and will be overwritten
[Unit]
Description=Ceph OSD
After=network.target

[Service]
EnvironmentFile=-/etc/environment
ExecStartPre=-/usr/bin/rm -f /%t/%n-pid /%t/%n-cid
ExecStartPre=-/usr/bin/podman rm -f ceph-osd-%i
ExecStart=/usr/bin/podman run -it --entrypoint /bin/bash \
  -d --conmon-pidfile /%t/%n-pid --cidfile /%t/%n-cid \
  --rm \
  --net=host \
  --privileged=true \
  --pid=host \
  --ipc=host \
  --cpus=2 \
  -v /dev:/dev \
  -v /etc/localtime:/etc/localtime:ro \
  -v /var/lib/ceph:/var/lib/ceph:z \
  -v /etc/ceph:/etc/ceph:z \
  -v /var/run/ceph:/var/run/ceph:z \
  -v /var/run/udev/:/var/run/udev/ \
  -v /var/log/ceph:/var/log/ceph:z \
  -e OSD_BLUESTORE=1 -e OSD_FILESTORE=0 -e OSD_DMCRYPT=0 \
  -e CLUSTER=ceph \
  -v /run/lvm/:/run/lvm/ \
  -e CEPH_DAEMON=OSD_CEPH_VOLUME_ACTIVATE \
  -e CONTAINER_IMAGE=registry.redhat.io/rhceph/rhceph-4-rhel8:latest \
  -e OSD_ID=%i \
  -e DEBUG=stayalive \
  --name=ceph-osd-%i \
   \
  registry.redhat.io/rhceph/rhceph-4-rhel8:latest
ExecStop=-/usr/bin/sh -c "/usr/bin/podman rm -f `cat /%t/%n-cid`"
KillMode=none
Restart=always
RestartSec=10s
TimeoutStartSec=120
TimeoutStopSec=15
Type=forking
PIDFile=/%t/%n-pid

[Install]
WantedBy=multi-user.target

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Restart the OSD service associated with the OSD_ID.
Syntax
```
systemctl restart ceph-osd@OSD_ID.service
```
Replace OSD_ID with the ID of the OSD.
Example
```
[root@osd ~]# systemctl restart ceph-osd@0.service
```

Syntax

podman exec -it ceph-osd-OSD_ID /bin/bash

Example

[root@osd ~]# podman exec -it ceph-osd-0 /bin/bash

Get osd fsid and activate the OSD to mount OSD’s logical volume (LV).

Syntax

ceph-volume lvm list |grep -A15 "osd\.OSD_ID"|grep "osd fsid"
ceph-volume lvm activate --bluestore OSD_ID OSD_FSID

Example

[root@osd ~]# ceph-volume lvm list |grep -A15 "osd\.0"|grep "osd fsid"
              osd fsid                  087eee15-6561-40a3-8fe4-9583ba64a4ff
[root@osd ~]# ceph-volume lvm activate --bluestore 0 087eee15-6561-40a3-8fe4-9583ba64a4ff
Running command: /usr/bin/mount -t tmpfs tmpfs /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/ceph-bluestore-tool --cluster=ceph prime-osd-dir --dev /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc --path /var/lib/ceph/osd/ceph-0 --no-mon-config
Running command: /usr/bin/ln -snf /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -h ceph:ceph /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -R ceph:ceph /dev/mapper/ceph--41c69f8f--30e2--4685--9c5c--c605898c5537-osd--data--d073e8b3--0b89--4271--af5b--83045fd000dc
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/systemctl enable ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff
 stderr: Created symlink /etc/systemd/system/multi-user.target.wants/ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff.service → /usr/lib/systemd/system/ceph-volume@.service.
Running command: /usr/bin/systemctl enable --runtime ceph-osd@0
 stderr: Created symlink /run/systemd/system/ceph-osd.target.wants/ceph osd@0.service → /usr/lib/systemd/system/ceph-osd@.service.
Running command: /usr/bin/systemctl start ceph-osd@0
 stderr: Running in chroot, ignoring request: start
--> ceph-volume lvm activate successful for osd ID: 0

Identify all the objects within an OSD, regardless of their placement group:

[root@osd ~]# ceph-objectstore-tool --data-path PATH_TO_OSD --op list

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --op list

Identify all the objects within a placement group:

[root@osd ~]# ceph-objectstore-tool --data-path PATH_TO_OSD --pgid PG_ID --op list

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --pgid 0.1c --op list

Identify the PG an object belongs to:

[root@osd ~]# ceph-objectstore-tool --data-path PATH_TO_OSD --op list OBJECT_ID

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --op list default.region

For containerized deployments, to revert the changes, follow the below steps:

After exiting the container, copy /etc/systemd/system/ceph-osd@.service unit file from /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.modified
[root@osd ~]# cp /root/ceph-osd@.service.backup /etc/systemd/system/ceph-osd@.service

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Move /run/ceph-osd@OSD_ID.service-cid file to /tmp.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /tmp
```

Restart the OSD service associated with the OSD_ID.

Syntax

[root@osd ~]# systemctl restart ceph-osd@OSD_ID.service

Example

[root@osd ~]# systemctl restart ceph-osd@0.service

Additional Resources

For more information on stopping an OSD, see the Starting, Stopping, and Restarting the Ceph Daemons by Instance section in the Red Hat Ceph Storage Administration Guide.

10.3.3. Listing lost objects

An OSD can mark objects as lost or unfound. You can use the ceph-objectstore-tool to list the lost and unfound objects stored within an OSD.

Prerequisites

Root-level access to the Ceph OSD node.
Stopping the ceph-osd daemon.

Procedure

Verify the appropriate OSD is down:

[root@osd ~]# systemctl status ceph-osd@OSD_NUMBER

Example

[root@osd ~]# systemctl status ceph-osd@1

For containerized deployments, to access the bluestore tool, follow the below steps:

Set noout flag on cluster.
Example
```
[root@mon ~]# ceph osd set noout
```
Login to the node hosting the OSD container.

Backup /etc/systemd/system/ceph-osd@.service unit file to /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.backup

Move /run/ceph-osd@OSD_ID.service-cid file to /root.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /root
```

Edit /etc/systemd/system/ceph-osd@.service unit file and add -it --entrypoint /bin/bash option to podman command.

Example

# Please do not change this file directly since it is managed by Ansible and will be overwritten
[Unit]
Description=Ceph OSD
After=network.target

[Service]
EnvironmentFile=-/etc/environment
ExecStartPre=-/usr/bin/rm -f /%t/%n-pid /%t/%n-cid
ExecStartPre=-/usr/bin/podman rm -f ceph-osd-%i
ExecStart=/usr/bin/podman run -it --entrypoint /bin/bash \
  -d --conmon-pidfile /%t/%n-pid --cidfile /%t/%n-cid \
  --rm \
  --net=host \
  --privileged=true \
  --pid=host \
  --ipc=host \
  --cpus=2 \
  -v /dev:/dev \
  -v /etc/localtime:/etc/localtime:ro \
  -v /var/lib/ceph:/var/lib/ceph:z \
  -v /etc/ceph:/etc/ceph:z \
  -v /var/run/ceph:/var/run/ceph:z \
  -v /var/run/udev/:/var/run/udev/ \
  -v /var/log/ceph:/var/log/ceph:z \
  -e OSD_BLUESTORE=1 -e OSD_FILESTORE=0 -e OSD_DMCRYPT=0 \
  -e CLUSTER=ceph \
  -v /run/lvm/:/run/lvm/ \
  -e CEPH_DAEMON=OSD_CEPH_VOLUME_ACTIVATE \
  -e CONTAINER_IMAGE=registry.redhat.io/rhceph/rhceph-4-rhel8:latest \
  -e OSD_ID=%i \
  -e DEBUG=stayalive \
  --name=ceph-osd-%i \
   \
  registry.redhat.io/rhceph/rhceph-4-rhel8:latest
ExecStop=-/usr/bin/sh -c "/usr/bin/podman rm -f `cat /%t/%n-cid`"
KillMode=none
Restart=always
RestartSec=10s
TimeoutStartSec=120
TimeoutStopSec=15
Type=forking
PIDFile=/%t/%n-pid

[Install]
WantedBy=multi-user.target

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Restart the OSD service associated with the OSD_ID.
Syntax
```
systemctl restart ceph-osd@OSD_ID.service
```
Replace OSD_ID with the ID of the OSD.
Example
```
[root@osd ~]# systemctl restart ceph-osd@0.service
```

Syntax

podman exec -it ceph-osd-OSD_ID /bin/bash

Example

[root@osd ~]# podman exec -it ceph-osd-0 /bin/bash

Get osd fsid and activate the OSD to mount OSD’s logical volume (LV).

Syntax

ceph-volume lvm list |grep -A15 "osd\.OSD_ID"|grep "osd fsid"
ceph-volume lvm activate --bluestore OSD_ID OSD_FSID

Example

[root@osd ~]# ceph-volume lvm list |grep -A15 "osd\.0"|grep "osd fsid"
              osd fsid                  087eee15-6561-40a3-8fe4-9583ba64a4ff
[root@osd ~]# ceph-volume lvm activate --bluestore 0 087eee15-6561-40a3-8fe4-9583ba64a4ff
Running command: /usr/bin/mount -t tmpfs tmpfs /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/ceph-bluestore-tool --cluster=ceph prime-osd-dir --dev /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc --path /var/lib/ceph/osd/ceph-0 --no-mon-config
Running command: /usr/bin/ln -snf /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -h ceph:ceph /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -R ceph:ceph /dev/mapper/ceph--41c69f8f--30e2--4685--9c5c--c605898c5537-osd--data--d073e8b3--0b89--4271--af5b--83045fd000dc
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/systemctl enable ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff
 stderr: Created symlink /etc/systemd/system/multi-user.target.wants/ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff.service → /usr/lib/systemd/system/ceph-volume@.service.
Running command: /usr/bin/systemctl enable --runtime ceph-osd@0
 stderr: Created symlink /run/systemd/system/ceph-osd.target.wants/ceph osd@0.service → /usr/lib/systemd/system/ceph-osd@.service.
Running command: /usr/bin/systemctl start ceph-osd@0
 stderr: Running in chroot, ignoring request: start
--> ceph-volume lvm activate successful for osd ID: 0

Use the ceph-objectstore-tool utility to list lost and unfound objects. Select the appropriate circumstance:

To list all the lost objects:

[root@osd ~]# ceph-objectstore-tool --data-path PATH_TO_OSD --op list-lost

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --op list-lost

To list all the lost objects within a placement group:

[root@osd ~]# ceph-objectstore-tool --data-path PATH_TO_OSD --pgid PG_ID --op list-lost

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --pgid 0.1c --op list-lost

To list a lost object by its identifier:

[root@osd ~]# ceph-objectstore-tool --data-path PATH_TO_OSD --op list-lost OBJECT_ID

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --op list-lost default.region

For containerized deployments, to revert the changes, follow the below steps:

After exiting the container, copy /etc/systemd/system/ceph-osd@.service unit file from /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.modified
[root@osd ~]# cp /root/ceph-osd@.service.backup /etc/systemd/system/ceph-osd@.service

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Move /run/ceph-osd@OSD_ID.service-cid file to /tmp.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /tmp
```

Restart the OSD service associated with the OSD_ID.

Syntax

[root@osd ~]# systemctl restart ceph-osd@OSD_ID.service

Example

[root@osd ~]# systemctl restart ceph-osd@0.service

Additional Resources

For more information on stopping an OSD, see the Starting, Stopping, and Restarting a Ceph Daemons by Instance section in the Red Hat Ceph Storage Administration Guide.

10.3.4. Fixing lost objects

You can use the ceph-objectstore-tool utility to list and fix lost and unfound objects stored within a Ceph OSD. This procedure applies only to legacy objects.

Prerequisites

Root-level access to the Ceph OSD node.
Stopping the ceph-osd daemon.

Procedure

Verify the appropriate OSD is down:

Syntax

[root@osd ~]# systemctl status ceph-osd@OSD_NUMBER

Example

[root@osd ~]# systemctl status ceph-osd@1

For containerized deployments, to access the bluestore tool, follow the below steps:

Set noout flag on cluster.
Example
```
[root@mon ~]# ceph osd set noout
```
Login to the node hosting the OSD container.

Backup /etc/systemd/system/ceph-osd@.service unit file to /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.backup

Move /run/ceph-osd@OSD_ID.service-cid file to /root.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /root
```

Edit /etc/systemd/system/ceph-osd@.service unit file and add -it --entrypoint /bin/bash option to podman command.

Example

# Please do not change this file directly since it is managed by Ansible and will be overwritten
[Unit]
Description=Ceph OSD
After=network.target

[Service]
EnvironmentFile=-/etc/environment
ExecStartPre=-/usr/bin/rm -f /%t/%n-pid /%t/%n-cid
ExecStartPre=-/usr/bin/podman rm -f ceph-osd-%i
ExecStart=/usr/bin/podman run -it --entrypoint /bin/bash \
  -d --conmon-pidfile /%t/%n-pid --cidfile /%t/%n-cid \
  --rm \
  --net=host \
  --privileged=true \
  --pid=host \
  --ipc=host \
  --cpus=2 \
  -v /dev:/dev \
  -v /etc/localtime:/etc/localtime:ro \
  -v /var/lib/ceph:/var/lib/ceph:z \
  -v /etc/ceph:/etc/ceph:z \
  -v /var/run/ceph:/var/run/ceph:z \
  -v /var/run/udev/:/var/run/udev/ \
  -v /var/log/ceph:/var/log/ceph:z \
  -e OSD_BLUESTORE=1 -e OSD_FILESTORE=0 -e OSD_DMCRYPT=0 \
  -e CLUSTER=ceph \
  -v /run/lvm/:/run/lvm/ \
  -e CEPH_DAEMON=OSD_CEPH_VOLUME_ACTIVATE \
  -e CONTAINER_IMAGE=registry.redhat.io/rhceph/rhceph-4-rhel8:latest \
  -e OSD_ID=%i \
  -e DEBUG=stayalive \
  --name=ceph-osd-%i \
   \
  registry.redhat.io/rhceph/rhceph-4-rhel8:latest
ExecStop=-/usr/bin/sh -c "/usr/bin/podman rm -f `cat /%t/%n-cid`"
KillMode=none
Restart=always
RestartSec=10s
TimeoutStartSec=120
TimeoutStopSec=15
Type=forking
PIDFile=/%t/%n-pid

[Install]
WantedBy=multi-user.target

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Restart the OSD service associated with the OSD_ID.
Syntax
```
systemctl restart ceph-osd@OSD_ID.service
```
Replace OSD_ID with the ID of the OSD.
Example
```
[root@osd ~]# systemctl restart ceph-osd@0.service
```

Syntax

podman exec -it ceph-osd-OSD_ID /bin/bash

Example

[root@osd ~]# podman exec -it ceph-osd-0 /bin/bash

Get osd fsid and activate the OSD to mount OSD’s logical volume (LV).

Syntax

ceph-volume lvm list |grep -A15 "osd\.OSD_ID"|grep "osd fsid"
ceph-volume lvm activate --bluestore OSD_ID OSD_FSID

Example

[root@osd ~]# ceph-volume lvm list |grep -A15 "osd\.0"|grep "osd fsid"
              osd fsid                  087eee15-6561-40a3-8fe4-9583ba64a4ff
[root@osd ~]# ceph-volume lvm activate --bluestore 0 087eee15-6561-40a3-8fe4-9583ba64a4ff
Running command: /usr/bin/mount -t tmpfs tmpfs /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/ceph-bluestore-tool --cluster=ceph prime-osd-dir --dev /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc --path /var/lib/ceph/osd/ceph-0 --no-mon-config
Running command: /usr/bin/ln -snf /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -h ceph:ceph /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -R ceph:ceph /dev/mapper/ceph--41c69f8f--30e2--4685--9c5c--c605898c5537-osd--data--d073e8b3--0b89--4271--af5b--83045fd000dc
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/systemctl enable ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff
 stderr: Created symlink /etc/systemd/system/multi-user.target.wants/ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff.service → /usr/lib/systemd/system/ceph-volume@.service.
Running command: /usr/bin/systemctl enable --runtime ceph-osd@0
 stderr: Created symlink /run/systemd/system/ceph-osd.target.wants/ceph osd@0.service → /usr/lib/systemd/system/ceph-osd@.service.
Running command: /usr/bin/systemctl start ceph-osd@0
 stderr: Running in chroot, ignoring request: start
--> ceph-volume lvm activate successful for osd ID: 0

To list all the lost legacy objects:

Syntax

ceph-objectstore-tool --data-path PATH_TO_OSD --op fix-lost --dry-run

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --op fix-lost --dry-run

Use the ceph-objectstore-tool utility to fix lost and unfound objects as a ceph user. Select the appropriate circumstance:

To fix all lost objects:

Syntax

su - ceph -c 'ceph-objectstore-tool --data-path PATH_TO_OSD --op fix-lost'

Example

[root@osd ~]# su - ceph -c 'ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --op fix-lost'

To fix all the lost objects within a placement group:

su - ceph -c 'ceph-objectstore-tool --data-path _PATH_TO_OSD_ --pgid _PG_ID_ --op fix-lost'

Example

[root@osd ~]# su - ceph -c 'ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --pgid 0.1c --op fix-lost'

To fix a lost object by its identifier:

Syntax

su - ceph -c 'ceph-objectstore-tool --data-path PATH_TO_OSD --op fix-lost OBJECT_ID'

Example

[root@osd ~]# su - ceph -c 'ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --op fix-lost default.region'

For containerized deployments, to revert the changes, follow the below steps:

After exiting the container, copy /etc/systemd/system/ceph-osd@.service unit file from /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.modified
[root@osd ~]# cp /root/ceph-osd@.service.backup /etc/systemd/system/ceph-osd@.service

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Move /run/ceph-osd@OSD_ID.service-cid file to /tmp.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /tmp
```

Restart the OSD service associated with the OSD_ID.

Syntax

[root@osd ~]# systemctl restart ceph-osd@OSD_ID.service

Example

[root@osd ~]# systemctl restart ceph-osd@0.service

Additional Resources

For more information on stopping an OSD, see the Starting, Stopping, and Restarting the Ceph Daemons by Instance section in the Red Hat Ceph Storage Administration Guide.

10.4. Troubleshooting low-level object operations

As a storage administrator, you can use the ceph-objectstore-tool utility to perform low-level object operations. The ceph-objectstore-tool utility supports the following low-level object operations:

Manipulate the object’s content
Remove an object
List the object map (OMAP)
Manipulate the OMAP header
Manipulate the OMAP key
List the object’s attributes
Manipulate the object’s attribute key

Important

Manipulating objects can cause unrecoverable data loss. Contact Red Hat support before using the ceph-objectstore-tool utility.

10.4.1. Prerequisites

Root-level access to the Ceph OSD nodes.

10.4.2. Manipulating the object’s content

With the ceph-objectstore-tool utility, you can get or set bytes on an object.

Important

Setting the bytes on an object can cause unrecoverable data loss. To prevent data loss, make a backup copy of the object.

Prerequisites

Root-level access to the Ceph OSD node.
Stopping the ceph-osd daemon.

Procedure

Verify the appropriate OSD is down:

[root@osd ~]# systemctl status ceph-osd@$OSD_NUMBER

Example

[root@osd ~]# systemctl status ceph-osd@1

For containerized deployments, to access the bluestore tool, follow the below steps:

Set noout flag on cluster.
Example
```
[root@mon ~]# ceph osd set noout
```
Login to the node hosting the OSD container.

Backup /etc/systemd/system/ceph-osd@.service unit file to /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.backup

Move /run/ceph-osd@OSD_ID.service-cid file to /root.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /root
```

Edit /etc/systemd/system/ceph-osd@.service unit file and add -it --entrypoint /bin/bash option to podman command.

Example

# Please do not change this file directly since it is managed by Ansible and will be overwritten
[Unit]
Description=Ceph OSD
After=network.target

[Service]
EnvironmentFile=-/etc/environment
ExecStartPre=-/usr/bin/rm -f /%t/%n-pid /%t/%n-cid
ExecStartPre=-/usr/bin/podman rm -f ceph-osd-%i
ExecStart=/usr/bin/podman run -it --entrypoint /bin/bash \
  -d --conmon-pidfile /%t/%n-pid --cidfile /%t/%n-cid \
  --rm \
  --net=host \
  --privileged=true \
  --pid=host \
  --ipc=host \
  --cpus=2 \
  -v /dev:/dev \
  -v /etc/localtime:/etc/localtime:ro \
  -v /var/lib/ceph:/var/lib/ceph:z \
  -v /etc/ceph:/etc/ceph:z \
  -v /var/run/ceph:/var/run/ceph:z \
  -v /var/run/udev/:/var/run/udev/ \
  -v /var/log/ceph:/var/log/ceph:z \
  -e OSD_BLUESTORE=1 -e OSD_FILESTORE=0 -e OSD_DMCRYPT=0 \
  -e CLUSTER=ceph \
  -v /run/lvm/:/run/lvm/ \
  -e CEPH_DAEMON=OSD_CEPH_VOLUME_ACTIVATE \
  -e CONTAINER_IMAGE=registry.redhat.io/rhceph/rhceph-4-rhel8:latest \
  -e OSD_ID=%i \
  -e DEBUG=stayalive \
  --name=ceph-osd-%i \
   \
  registry.redhat.io/rhceph/rhceph-4-rhel8:latest
ExecStop=-/usr/bin/sh -c "/usr/bin/podman rm -f `cat /%t/%n-cid`"
KillMode=none
Restart=always
RestartSec=10s
TimeoutStartSec=120
TimeoutStopSec=15
Type=forking
PIDFile=/%t/%n-pid

[Install]
WantedBy=multi-user.target

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Restart the OSD service associated with the OSD_ID.
Syntax
```
systemctl restart ceph-osd@OSD_ID.service
```
Replace OSD_ID with the ID of the OSD.
Example
```
[root@osd ~]# systemctl restart ceph-osd@0.service
```

Syntax

podman exec -it ceph-osd-OSD_ID /bin/bash

Example

[root@osd ~]# podman exec -it ceph-osd-0 /bin/bash

Get osd fsid and activate the OSD to mount OSD’s logical volume (LV).

Syntax

ceph-volume lvm list |grep -A15 "osd\.OSD_ID"|grep "osd fsid"
ceph-volume lvm activate --bluestore OSD_ID OSD_FSID

Example

[root@osd ~]# ceph-volume lvm list |grep -A15 "osd\.0"|grep "osd fsid"
              osd fsid                  087eee15-6561-40a3-8fe4-9583ba64a4ff
[root@osd ~]# ceph-volume lvm activate --bluestore 0 087eee15-6561-40a3-8fe4-9583ba64a4ff
Running command: /usr/bin/mount -t tmpfs tmpfs /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/ceph-bluestore-tool --cluster=ceph prime-osd-dir --dev /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc --path /var/lib/ceph/osd/ceph-0 --no-mon-config
Running command: /usr/bin/ln -snf /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -h ceph:ceph /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -R ceph:ceph /dev/mapper/ceph--41c69f8f--30e2--4685--9c5c--c605898c5537-osd--data--d073e8b3--0b89--4271--af5b--83045fd000dc
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/systemctl enable ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff
 stderr: Created symlink /etc/systemd/system/multi-user.target.wants/ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff.service → /usr/lib/systemd/system/ceph-volume@.service.
Running command: /usr/bin/systemctl enable --runtime ceph-osd@0
 stderr: Created symlink /run/systemd/system/ceph-osd.target.wants/ceph osd@0.service → /usr/lib/systemd/system/ceph-osd@.service.
Running command: /usr/bin/systemctl start ceph-osd@0
 stderr: Running in chroot, ignoring request: start
--> ceph-volume lvm activate successful for osd ID: 0

Find the object by listing the objects of the OSD or placement group (PG).

Before setting the bytes on an object, make a backup and a working copy of the object:

[root@osd ~]# ceph-objectstore-tool --data-path PATH_TO_OSD --pgid PG_ID \
OBJECT \
get-bytes > OBJECT_FILE_NAME

[root@osd ~]# ceph-objectstore-tool --data-path PATH_TO_OSD --pgid PG_ID \
OBJECT \
get-bytes > OBJECT_FILE_NAME

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --pgid 0.1c \
'{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}'  \
get-bytes > zone_info.default.backup

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --pgid 0.1c \
'{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}'  \
get-bytes > zone_info.default.working-copy

Edit the working copy object file and modify the object contents accordingly.

Set the bytes of the object:

[root@osd ~]# ceph-objectstore-tool --data-path PATH_TO_OSD --pgid PG_ID \
OBJECT \
set-bytes < OBJECT_FILE_NAME

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --pgid 0.1c \
'{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}' \
set-bytes < zone_info.default.working-copy

For containerized deployments, to revert the changes, follow the below steps:

After exiting the container, copy /etc/systemd/system/ceph-osd@.service unit file from /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.modified
[root@osd ~]# cp /root/ceph-osd@.service.backup /etc/systemd/system/ceph-osd@.service

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Move /run/ceph-osd@OSD_ID.service-cid file to /tmp.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /tmp
```

Restart the OSD service associated with the OSD_ID.

Syntax

[root@osd ~]# systemctl restart ceph-osd@OSD_ID.service

Example

[root@osd ~]# systemctl restart ceph-osd@0.service

Additional Resources

For more information on stopping an OSD, see the Starting, Stopping, and Restarting the Ceph Daemons by Instance section in the Red Hat Ceph Storage Administration Guide.

10.4.3. Removing an object

Use the ceph-objectstore-tool utility to remove an object. By removing an object, its contents and references are removed from the placement group (PG).

Important

You cannot recreate an object once it is removed.

Prerequisites

Root-level access to the Ceph OSD node.
Stopping the ceph-osd daemon.

Procedure

Verify the appropriate OSD is down:

[root@osd ~]# systemctl status ceph-osd@$OSD_NUMBER

Example

[root@osd ~]# systemctl status ceph-osd@1

For containerized deployments, to access the bluestore tool, follow the below steps:

Set noout flag on cluster.
Example
```
[root@mon ~]# ceph osd set noout
```
Login to the node hosting the OSD container.

Backup /etc/systemd/system/ceph-osd@.service unit file to /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.backup

Move /run/ceph-osd@OSD_ID.service-cid file to /root.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /root
```

Edit /etc/systemd/system/ceph-osd@.service unit file and add -it --entrypoint /bin/bash option to podman command.

Example

# Please do not change this file directly since it is managed by Ansible and will be overwritten
[Unit]
Description=Ceph OSD
After=network.target

[Service]
EnvironmentFile=-/etc/environment
ExecStartPre=-/usr/bin/rm -f /%t/%n-pid /%t/%n-cid
ExecStartPre=-/usr/bin/podman rm -f ceph-osd-%i
ExecStart=/usr/bin/podman run -it --entrypoint /bin/bash \
  -d --conmon-pidfile /%t/%n-pid --cidfile /%t/%n-cid \
  --rm \
  --net=host \
  --privileged=true \
  --pid=host \
  --ipc=host \
  --cpus=2 \
  -v /dev:/dev \
  -v /etc/localtime:/etc/localtime:ro \
  -v /var/lib/ceph:/var/lib/ceph:z \
  -v /etc/ceph:/etc/ceph:z \
  -v /var/run/ceph:/var/run/ceph:z \
  -v /var/run/udev/:/var/run/udev/ \
  -v /var/log/ceph:/var/log/ceph:z \
  -e OSD_BLUESTORE=1 -e OSD_FILESTORE=0 -e OSD_DMCRYPT=0 \
  -e CLUSTER=ceph \
  -v /run/lvm/:/run/lvm/ \
  -e CEPH_DAEMON=OSD_CEPH_VOLUME_ACTIVATE \
  -e CONTAINER_IMAGE=registry.redhat.io/rhceph/rhceph-4-rhel8:latest \
  -e OSD_ID=%i \
  -e DEBUG=stayalive \
  --name=ceph-osd-%i \
   \
  registry.redhat.io/rhceph/rhceph-4-rhel8:latest
ExecStop=-/usr/bin/sh -c "/usr/bin/podman rm -f `cat /%t/%n-cid`"
KillMode=none
Restart=always
RestartSec=10s
TimeoutStartSec=120
TimeoutStopSec=15
Type=forking
PIDFile=/%t/%n-pid

[Install]
WantedBy=multi-user.target

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Restart the OSD service associated with the OSD_ID.
Syntax
```
systemctl restart ceph-osd@OSD_ID.service
```
Replace OSD_ID with the ID of the OSD.
Example
```
[root@osd ~]# systemctl restart ceph-osd@0.service
```

Syntax

podman exec -it ceph-osd-OSD_ID /bin/bash

Example

[root@osd ~]# podman exec -it ceph-osd-0 /bin/bash

Get osd fsid and activate the OSD to mount OSD’s logical volume (LV).

Syntax

ceph-volume lvm list |grep -A15 "osd\.OSD_ID"|grep "osd fsid"
ceph-volume lvm activate --bluestore OSD_ID OSD_FSID

Example

[root@osd ~]# ceph-volume lvm list |grep -A15 "osd\.0"|grep "osd fsid"
              osd fsid                  087eee15-6561-40a3-8fe4-9583ba64a4ff
[root@osd ~]# ceph-volume lvm activate --bluestore 0 087eee15-6561-40a3-8fe4-9583ba64a4ff
Running command: /usr/bin/mount -t tmpfs tmpfs /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/ceph-bluestore-tool --cluster=ceph prime-osd-dir --dev /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc --path /var/lib/ceph/osd/ceph-0 --no-mon-config
Running command: /usr/bin/ln -snf /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -h ceph:ceph /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -R ceph:ceph /dev/mapper/ceph--41c69f8f--30e2--4685--9c5c--c605898c5537-osd--data--d073e8b3--0b89--4271--af5b--83045fd000dc
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/systemctl enable ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff
 stderr: Created symlink /etc/systemd/system/multi-user.target.wants/ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff.service → /usr/lib/systemd/system/ceph-volume@.service.
Running command: /usr/bin/systemctl enable --runtime ceph-osd@0
 stderr: Created symlink /run/systemd/system/ceph-osd.target.wants/ceph osd@0.service → /usr/lib/systemd/system/ceph-osd@.service.
Running command: /usr/bin/systemctl start ceph-osd@0
 stderr: Running in chroot, ignoring request: start
--> ceph-volume lvm activate successful for osd ID: 0

Remove an object:

Syntax

ceph-objectstore-tool --data-path PATH_TO_OSD --pgid PG_ID \
OBJECT \
remove

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --pgid 0.1c \
'{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}' \
remove

For containerized deployments, to revert the changes, follow the below steps:

After exiting the container, copy /etc/systemd/system/ceph-osd@.service unit file from /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.modified
[root@osd ~]# cp /root/ceph-osd@.service.backup /etc/systemd/system/ceph-osd@.service

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Move /run/ceph-osd@OSD_ID.service-cid file to /tmp.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /tmp
```

Restart the OSD service associated with the OSD_ID.

Syntax

[root@osd ~]# systemctl restart ceph-osd@OSD_ID.service

Example

[root@osd ~]# systemctl restart ceph-osd@0.service

Additional Resources

For more information on stopping an OSD, see the Starting, Stopping, and Restarting the Ceph Daemons by Instance section in the Red Hat Ceph Storage Administration Guide.

10.4.4. Listing the object map

Use the ceph-objectstore-tool utility to list the contents of the object map (OMAP). The output provides you a list of keys.

Prerequisites

Root-level access to the Ceph OSD node.
Stopping the ceph-osd daemon.

Procedure

Verify the appropriate OSD is down:

[root@osd ~]# systemctl status ceph-osd@OSD_NUMBER

Example

[root@osd ~]# systemctl status ceph-osd@1

For containerized deployments, to access the bluestore tool, follow the below steps:

Set noout flag on cluster.
Example
```
[root@mon ~]# ceph osd set noout
```
Login to the node hosting the OSD container.

Backup /etc/systemd/system/ceph-osd@.service unit file to /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.backup

Move /run/ceph-osd@OSD_ID.service-cid file to /root.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /root
```

Edit /etc/systemd/system/ceph-osd@.service unit file and add -it --entrypoint /bin/bash option to podman command.

Example

# Please do not change this file directly since it is managed by Ansible and will be overwritten
[Unit]
Description=Ceph OSD
After=network.target

[Service]
EnvironmentFile=-/etc/environment
ExecStartPre=-/usr/bin/rm -f /%t/%n-pid /%t/%n-cid
ExecStartPre=-/usr/bin/podman rm -f ceph-osd-%i
ExecStart=/usr/bin/podman run -it --entrypoint /bin/bash \
  -d --conmon-pidfile /%t/%n-pid --cidfile /%t/%n-cid \
  --rm \
  --net=host \
  --privileged=true \
  --pid=host \
  --ipc=host \
  --cpus=2 \
  -v /dev:/dev \
  -v /etc/localtime:/etc/localtime:ro \
  -v /var/lib/ceph:/var/lib/ceph:z \
  -v /etc/ceph:/etc/ceph:z \
  -v /var/run/ceph:/var/run/ceph:z \
  -v /var/run/udev/:/var/run/udev/ \
  -v /var/log/ceph:/var/log/ceph:z \
  -e OSD_BLUESTORE=1 -e OSD_FILESTORE=0 -e OSD_DMCRYPT=0 \
  -e CLUSTER=ceph \
  -v /run/lvm/:/run/lvm/ \
  -e CEPH_DAEMON=OSD_CEPH_VOLUME_ACTIVATE \
  -e CONTAINER_IMAGE=registry.redhat.io/rhceph/rhceph-4-rhel8:latest \
  -e OSD_ID=%i \
  -e DEBUG=stayalive \
  --name=ceph-osd-%i \
   \
  registry.redhat.io/rhceph/rhceph-4-rhel8:latest
ExecStop=-/usr/bin/sh -c "/usr/bin/podman rm -f `cat /%t/%n-cid`"
KillMode=none
Restart=always
RestartSec=10s
TimeoutStartSec=120
TimeoutStopSec=15
Type=forking
PIDFile=/%t/%n-pid

[Install]
WantedBy=multi-user.target

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Restart the OSD service associated with the OSD_ID.
Syntax
```
systemctl restart ceph-osd@OSD_ID.service
```
Replace OSD_ID with the ID of the OSD.
Example
```
[root@osd ~]# systemctl restart ceph-osd@0.service
```

Syntax

podman exec -it ceph-osd-OSD_ID /bin/bash

Example

[root@osd ~]# podman exec -it ceph-osd-0 /bin/bash

Get osd fsid and activate the OSD to mount OSD’s logical volume (LV).

Syntax

ceph-volume lvm list |grep -A15 "osd\.OSD_ID"|grep "osd fsid"
ceph-volume lvm activate --bluestore OSD_ID OSD_FSID

Example

[root@osd ~]# ceph-volume lvm list |grep -A15 "osd\.0"|grep "osd fsid"
              osd fsid                  087eee15-6561-40a3-8fe4-9583ba64a4ff
[root@osd ~]# ceph-volume lvm activate --bluestore 0 087eee15-6561-40a3-8fe4-9583ba64a4ff
Running command: /usr/bin/mount -t tmpfs tmpfs /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/ceph-bluestore-tool --cluster=ceph prime-osd-dir --dev /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc --path /var/lib/ceph/osd/ceph-0 --no-mon-config
Running command: /usr/bin/ln -snf /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -h ceph:ceph /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -R ceph:ceph /dev/mapper/ceph--41c69f8f--30e2--4685--9c5c--c605898c5537-osd--data--d073e8b3--0b89--4271--af5b--83045fd000dc
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/systemctl enable ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff
 stderr: Created symlink /etc/systemd/system/multi-user.target.wants/ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff.service → /usr/lib/systemd/system/ceph-volume@.service.
Running command: /usr/bin/systemctl enable --runtime ceph-osd@0
 stderr: Created symlink /run/systemd/system/ceph-osd.target.wants/ceph osd@0.service → /usr/lib/systemd/system/ceph-osd@.service.
Running command: /usr/bin/systemctl start ceph-osd@0
 stderr: Running in chroot, ignoring request: start
--> ceph-volume lvm activate successful for osd ID: 0

List the object map:

[root@osd ~]# ceph-objectstore-tool --data-path PATH_TO_OSD --pgid PG_ID \
OBJECT \
list-omap

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --pgid 0.1c \
'{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}' \
list-omap

For containerized deployments, to revert the changes, follow the below steps:

After exiting the container, copy /etc/systemd/system/ceph-osd@.service unit file from /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.modified
[root@osd ~]# cp /root/ceph-osd@.service.backup /etc/systemd/system/ceph-osd@.service

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Move /run/ceph-osd@OSD_ID.service-cid file to /tmp.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /tmp
```

Restart the OSD service associated with the OSD_ID.

Syntax

[root@osd ~]# systemctl restart ceph-osd@OSD_ID.service

Example

[root@osd ~]# systemctl restart ceph-osd@0.service

Additional Resources

For more information on stopping an OSD, see the Starting, Stopping, and Restarting the Ceph Daemons by Instance section in the Red Hat Ceph Storage Administration Guide.

10.4.5. Manipulating the object map header

The ceph-objectstore-tool utility will output the object map (OMAP) header with the values associated with the object’s keys.

Prerequisites

Root-level access to the Ceph OSD node.
Stopping the ceph-osd daemon.

Procedure

For containerized deployments, to access the bluestore tool, follow the below steps:

Set noout flag on cluster.
Example
```
[root@mon ~]# ceph osd set noout
```
Login to the node hosting the OSD container.

Backup /etc/systemd/system/ceph-osd@.service unit file to /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.backup

Move /run/ceph-osd@OSD_ID.service-cid file to /root.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /root
```

Edit /etc/systemd/system/ceph-osd@.service unit file and add -it --entrypoint /bin/bash option to podman command.

Example

# Please do not change this file directly since it is managed by Ansible and will be overwritten
[Unit]
Description=Ceph OSD
After=network.target

[Service]
EnvironmentFile=-/etc/environment
ExecStartPre=-/usr/bin/rm -f /%t/%n-pid /%t/%n-cid
ExecStartPre=-/usr/bin/podman rm -f ceph-osd-%i
ExecStart=/usr/bin/podman run -it --entrypoint /bin/bash \
  -d --conmon-pidfile /%t/%n-pid --cidfile /%t/%n-cid \
  --rm \
  --net=host \
  --privileged=true \
  --pid=host \
  --ipc=host \
  --cpus=2 \
  -v /dev:/dev \
  -v /etc/localtime:/etc/localtime:ro \
  -v /var/lib/ceph:/var/lib/ceph:z \
  -v /etc/ceph:/etc/ceph:z \
  -v /var/run/ceph:/var/run/ceph:z \
  -v /var/run/udev/:/var/run/udev/ \
  -v /var/log/ceph:/var/log/ceph:z \
  -e OSD_BLUESTORE=1 -e OSD_FILESTORE=0 -e OSD_DMCRYPT=0 \
  -e CLUSTER=ceph \
  -v /run/lvm/:/run/lvm/ \
  -e CEPH_DAEMON=OSD_CEPH_VOLUME_ACTIVATE \
  -e CONTAINER_IMAGE=registry.redhat.io/rhceph/rhceph-4-rhel8:latest \
  -e OSD_ID=%i \
  -e DEBUG=stayalive \
  --name=ceph-osd-%i \
   \
  registry.redhat.io/rhceph/rhceph-4-rhel8:latest
ExecStop=-/usr/bin/sh -c "/usr/bin/podman rm -f `cat /%t/%n-cid`"
KillMode=none
Restart=always
RestartSec=10s
TimeoutStartSec=120
TimeoutStopSec=15
Type=forking
PIDFile=/%t/%n-pid

[Install]
WantedBy=multi-user.target

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Restart the OSD service associated with the OSD_ID.
Syntax
```
systemctl restart ceph-osd@OSD_ID.service
```
Replace OSD_ID with the ID of the OSD.
Example
```
[root@osd ~]# systemctl restart ceph-osd@0.service
```

Syntax

podman exec -it ceph-osd-OSD_ID /bin/bash

Example

[root@osd ~]# podman exec -it ceph-osd-0 /bin/bash

Get osd fsid and activate the OSD to mount OSD’s logical volume (LV).

Syntax

ceph-volume lvm list |grep -A15 "osd\.OSD_ID"|grep "osd fsid"
ceph-volume lvm activate --bluestore OSD_ID OSD_FSID

Example

[root@osd ~]# ceph-volume lvm list |grep -A15 "osd\.0"|grep "osd fsid"
              osd fsid                  087eee15-6561-40a3-8fe4-9583ba64a4ff
[root@osd ~]# ceph-volume lvm activate --bluestore 0 087eee15-6561-40a3-8fe4-9583ba64a4ff
Running command: /usr/bin/mount -t tmpfs tmpfs /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/ceph-bluestore-tool --cluster=ceph prime-osd-dir --dev /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc --path /var/lib/ceph/osd/ceph-0 --no-mon-config
Running command: /usr/bin/ln -snf /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -h ceph:ceph /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -R ceph:ceph /dev/mapper/ceph--41c69f8f--30e2--4685--9c5c--c605898c5537-osd--data--d073e8b3--0b89--4271--af5b--83045fd000dc
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/systemctl enable ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff
 stderr: Created symlink /etc/systemd/system/multi-user.target.wants/ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff.service → /usr/lib/systemd/system/ceph-volume@.service.
Running command: /usr/bin/systemctl enable --runtime ceph-osd@0
 stderr: Created symlink /run/systemd/system/ceph-osd.target.wants/ceph osd@0.service → /usr/lib/systemd/system/ceph-osd@.service.
Running command: /usr/bin/systemctl start ceph-osd@0
 stderr: Running in chroot, ignoring request: start
--> ceph-volume lvm activate successful for osd ID: 0

Verify the appropriate OSD is down:

Syntax

systemctl status ceph-osd@OSD_NUMBER

Example

[root@osd ~]# systemctl status ceph-osd@1

Get the object map header:

Syntax

ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
get-omaphdr > OBJECT_MAP_FILE_NAME

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}'  \
get-omaphdr > zone_info.default.omaphdr.txt

Set the object map header:

Syntax

ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
get-omaphdr < OBJECT_MAP_FILE_NAME

Example

[root@osd ~]# su - ceph -c 'ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}'  \
set-omaphdr < zone_info.default.omaphdr.txt

For containerized deployments, to revert the changes, follow the below steps:

After exiting the container, copy /etc/systemd/system/ceph-osd@.service unit file from /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.modified
[root@osd ~]# cp /root/ceph-osd@.service.backup /etc/systemd/system/ceph-osd@.service

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Move /run/ceph-osd@OSD_ID.service-cid file to /tmp.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /tmp
```

Restart the OSD service associated with the OSD_ID.

Syntax

[root@osd ~]# systemctl restart ceph-osd@OSD_ID.service

Example

[root@osd ~]# systemctl restart ceph-osd@0.service

Additional Resources

For more information on stopping an OSD, see the Starting, Stopping, and Restarting the Ceph Daemons by Instance section in the Red Hat Ceph Storage Administration Guide.

10.4.6. Manipulating the object map key

Use the ceph-objectstore-tool utility to change the object map (OMAP) key. You need to provide the data path, the placement group identifier (PG ID), the object, and the key in the OMAP.

Prerequisites

Root-level access to the Ceph OSD node.
Stopping the ceph-osd daemon.

Procedure

For containerized deployments, to access the bluestore tool, follow the below steps:

Set noout flag on cluster.
Example
```
[root@mon ~]# ceph osd set noout
```
Login to the node hosting the OSD container.

Backup /etc/systemd/system/ceph-osd@.service unit file to /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.backup

Move /run/ceph-osd@OSD_ID.service-cid file to /root.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /root
```

Edit /etc/systemd/system/ceph-osd@.service unit file and add -it --entrypoint /bin/bash option to podman command.

Example

# Please do not change this file directly since it is managed by Ansible and will be overwritten
[Unit]
Description=Ceph OSD
After=network.target

[Service]
EnvironmentFile=-/etc/environment
ExecStartPre=-/usr/bin/rm -f /%t/%n-pid /%t/%n-cid
ExecStartPre=-/usr/bin/podman rm -f ceph-osd-%i
ExecStart=/usr/bin/podman run -it --entrypoint /bin/bash \
  -d --conmon-pidfile /%t/%n-pid --cidfile /%t/%n-cid \
  --rm \
  --net=host \
  --privileged=true \
  --pid=host \
  --ipc=host \
  --cpus=2 \
  -v /dev:/dev \
  -v /etc/localtime:/etc/localtime:ro \
  -v /var/lib/ceph:/var/lib/ceph:z \
  -v /etc/ceph:/etc/ceph:z \
  -v /var/run/ceph:/var/run/ceph:z \
  -v /var/run/udev/:/var/run/udev/ \
  -v /var/log/ceph:/var/log/ceph:z \
  -e OSD_BLUESTORE=1 -e OSD_FILESTORE=0 -e OSD_DMCRYPT=0 \
  -e CLUSTER=ceph \
  -v /run/lvm/:/run/lvm/ \
  -e CEPH_DAEMON=OSD_CEPH_VOLUME_ACTIVATE \
  -e CONTAINER_IMAGE=registry.redhat.io/rhceph/rhceph-4-rhel8:latest \
  -e OSD_ID=%i \
  -e DEBUG=stayalive \
  --name=ceph-osd-%i \
   \
  registry.redhat.io/rhceph/rhceph-4-rhel8:latest
ExecStop=-/usr/bin/sh -c "/usr/bin/podman rm -f `cat /%t/%n-cid`"
KillMode=none
Restart=always
RestartSec=10s
TimeoutStartSec=120
TimeoutStopSec=15
Type=forking
PIDFile=/%t/%n-pid

[Install]
WantedBy=multi-user.target

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Restart the OSD service associated with the OSD_ID.
Syntax
```
systemctl restart ceph-osd@OSD_ID.service
```
Replace OSD_ID with the ID of the OSD.
Example
```
[root@osd ~]# systemctl restart ceph-osd@0.service
```

Syntax

podman exec -it ceph-osd-OSD_ID /bin/bash

Example

[root@osd ~]# podman exec -it ceph-osd-0 /bin/bash

Get osd fsid and activate the OSD to mount OSD’s logical volume (LV).

Syntax

ceph-volume lvm list |grep -A15 "osd\.OSD_ID"|grep "osd fsid"
ceph-volume lvm activate --bluestore OSD_ID OSD_FSID

Example

[root@osd ~]# ceph-volume lvm list |grep -A15 "osd\.0"|grep "osd fsid"
              osd fsid                  087eee15-6561-40a3-8fe4-9583ba64a4ff
[root@osd ~]# ceph-volume lvm activate --bluestore 0 087eee15-6561-40a3-8fe4-9583ba64a4ff
Running command: /usr/bin/mount -t tmpfs tmpfs /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/ceph-bluestore-tool --cluster=ceph prime-osd-dir --dev /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc --path /var/lib/ceph/osd/ceph-0 --no-mon-config
Running command: /usr/bin/ln -snf /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -h ceph:ceph /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -R ceph:ceph /dev/mapper/ceph--41c69f8f--30e2--4685--9c5c--c605898c5537-osd--data--d073e8b3--0b89--4271--af5b--83045fd000dc
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/systemctl enable ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff
 stderr: Created symlink /etc/systemd/system/multi-user.target.wants/ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff.service → /usr/lib/systemd/system/ceph-volume@.service.
Running command: /usr/bin/systemctl enable --runtime ceph-osd@0
 stderr: Created symlink /run/systemd/system/ceph-osd.target.wants/ceph osd@0.service → /usr/lib/systemd/system/ceph-osd@.service.
Running command: /usr/bin/systemctl start ceph-osd@0
 stderr: Running in chroot, ignoring request: start
--> ceph-volume lvm activate successful for osd ID: 0

Get the object map key:

Syntax

ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
get-omap KEY > OBJECT_MAP_FILE_NAME

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}'  \
get-omap "" > zone_info.default.omap.txt

Set the object map key:

Syntax

ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
set-omap KEY < OBJECT_MAP_FILE_NAME

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}'  \
set-omap "" < zone_info.default.omap.txt

Remove the object map key:

Syntax

ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
rm-omap KEY

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}'  \
rm-omap ""

For containerized deployments, to revert the changes, follow the below steps:

After exiting the container, copy /etc/systemd/system/ceph-osd@.service unit file from /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.modified
[root@osd ~]# cp /root/ceph-osd@.service.backup /etc/systemd/system/ceph-osd@.service

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Move /run/ceph-osd@OSD_ID.service-cid file to /tmp.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /tmp
```

Restart the OSD service associated with the OSD_ID.

Syntax

[root@osd ~]# systemctl restart ceph-osd@OSD_ID.service

Example

[root@osd ~]# systemctl restart ceph-osd@0.service

Additional Resources

For more information on stopping an OSD, see the Starting, Stopping, and Restarting the Ceph Daemons by Instance section in the Red Hat Ceph Storage Administration Guide.

10.4.7. Listing the object’s attributes

Use the ceph-objectstore-tool utility to list an object’s attributes. The output provides you with the object’s keys and values.

Prerequisites

Root-level access to the Ceph OSD node.
Stopping the ceph-osd daemon.

Procedure

Verify the appropriate OSD is down:

[root@osd ~]# systemctl status ceph-osd@OSD_NUMBER

Example

[root@osd ~]# systemctl status ceph-osd@1

For containerized deployments, to access the bluestore tool, follow the below steps:

Set noout flag on cluster.
Example
```
[root@mon ~]# ceph osd set noout
```
Login to the node hosting the OSD container.

Backup /etc/systemd/system/ceph-osd@.service unit file to /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.backup

Move /run/ceph-osd@OSD_ID.service-cid file to /root.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /root
```

Edit /etc/systemd/system/ceph-osd@.service unit file and add -it --entrypoint /bin/bash option to podman command.

Example

# Please do not change this file directly since it is managed by Ansible and will be overwritten
[Unit]
Description=Ceph OSD
After=network.target

[Service]
EnvironmentFile=-/etc/environment
ExecStartPre=-/usr/bin/rm -f /%t/%n-pid /%t/%n-cid
ExecStartPre=-/usr/bin/podman rm -f ceph-osd-%i
ExecStart=/usr/bin/podman run -it --entrypoint /bin/bash \
  -d --conmon-pidfile /%t/%n-pid --cidfile /%t/%n-cid \
  --rm \
  --net=host \
  --privileged=true \
  --pid=host \
  --ipc=host \
  --cpus=2 \
  -v /dev:/dev \
  -v /etc/localtime:/etc/localtime:ro \
  -v /var/lib/ceph:/var/lib/ceph:z \
  -v /etc/ceph:/etc/ceph:z \
  -v /var/run/ceph:/var/run/ceph:z \
  -v /var/run/udev/:/var/run/udev/ \
  -v /var/log/ceph:/var/log/ceph:z \
  -e OSD_BLUESTORE=1 -e OSD_FILESTORE=0 -e OSD_DMCRYPT=0 \
  -e CLUSTER=ceph \
  -v /run/lvm/:/run/lvm/ \
  -e CEPH_DAEMON=OSD_CEPH_VOLUME_ACTIVATE \
  -e CONTAINER_IMAGE=registry.redhat.io/rhceph/rhceph-4-rhel8:latest \
  -e OSD_ID=%i \
  -e DEBUG=stayalive \
  --name=ceph-osd-%i \
   \
  registry.redhat.io/rhceph/rhceph-4-rhel8:latest
ExecStop=-/usr/bin/sh -c "/usr/bin/podman rm -f `cat /%t/%n-cid`"
KillMode=none
Restart=always
RestartSec=10s
TimeoutStartSec=120
TimeoutStopSec=15
Type=forking
PIDFile=/%t/%n-pid

[Install]
WantedBy=multi-user.target

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Restart the OSD service associated with the OSD_ID.
Syntax
```
systemctl restart ceph-osd@OSD_ID.service
```
Replace OSD_ID with the ID of the OSD.
Example
```
[root@osd ~]# systemctl restart ceph-osd@0.service
```

Syntax

podman exec -it ceph-osd-OSD_ID /bin/bash

Example

[root@osd ~]# podman exec -it ceph-osd-0 /bin/bash

Get osd fsid and activate the OSD to mount OSD’s logical volume (LV).

Syntax

ceph-volume lvm list |grep -A15 "osd\.OSD_ID"|grep "osd fsid"
ceph-volume lvm activate --bluestore OSD_ID OSD_FSID

Example

[root@osd ~]# ceph-volume lvm list |grep -A15 "osd\.0"|grep "osd fsid"
              osd fsid                  087eee15-6561-40a3-8fe4-9583ba64a4ff
[root@osd ~]# ceph-volume lvm activate --bluestore 0 087eee15-6561-40a3-8fe4-9583ba64a4ff
Running command: /usr/bin/mount -t tmpfs tmpfs /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/ceph-bluestore-tool --cluster=ceph prime-osd-dir --dev /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc --path /var/lib/ceph/osd/ceph-0 --no-mon-config
Running command: /usr/bin/ln -snf /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -h ceph:ceph /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -R ceph:ceph /dev/mapper/ceph--41c69f8f--30e2--4685--9c5c--c605898c5537-osd--data--d073e8b3--0b89--4271--af5b--83045fd000dc
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/systemctl enable ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff
 stderr: Created symlink /etc/systemd/system/multi-user.target.wants/ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff.service → /usr/lib/systemd/system/ceph-volume@.service.
Running command: /usr/bin/systemctl enable --runtime ceph-osd@0
 stderr: Created symlink /run/systemd/system/ceph-osd.target.wants/ceph osd@0.service → /usr/lib/systemd/system/ceph-osd@.service.
Running command: /usr/bin/systemctl start ceph-osd@0
 stderr: Running in chroot, ignoring request: start
--> ceph-volume lvm activate successful for osd ID: 0

List the object’s attributes:

ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
list-attrs

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}' \
list-attrs

For containerized deployments, to revert the changes, follow the below steps:

After exiting the container, copy /etc/systemd/system/ceph-osd@.service unit file from /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.modified
[root@osd ~]# cp /root/ceph-osd@.service.backup /etc/systemd/system/ceph-osd@.service

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Move /run/ceph-osd@OSD_ID.service-cid file to /tmp.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /tmp
```

Restart the OSD service associated with the OSD_ID.

Syntax

[root@osd ~]# systemctl restart ceph-osd@OSD_ID.service

Example

[root@osd ~]# systemctl restart ceph-osd@0.service

Additional Resources

For more information on stopping an OSD, see the Starting, Stopping, and Restarting the Ceph Daemons by Instance section in the Red Hat Ceph Storage Administration Guide.

10.4.8. Manipulating the object attribute key

Use the ceph-objectstore-tool utility to change an object’s attributes. To manipulate the object’s attributes you need the data and journal paths, the placement group identifier (PG ID), the object, and the key in the object’s attribute.

Prerequisites

Root-level access to the Ceph OSD node.
Stopping the ceph-osd daemon.

Procedure

Verify the appropriate OSD is down:

[root@osd ~]# systemctl status ceph-osd@$OSD_NUMBER

Example

[root@osd ~]# systemctl status ceph-osd@1

For containerized deployments, to access the bluestore tool, follow the below steps:

Set noout flag on cluster.
Example
```
[root@mon ~]# ceph osd set noout
```
Login to the node hosting the OSD container.

Backup /etc/systemd/system/ceph-osd@.service unit file to /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.backup

Move /run/ceph-osd@OSD_ID.service-cid file to /root.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /root
```

Edit /etc/systemd/system/ceph-osd@.service unit file and add -it --entrypoint /bin/bash option to podman command.

Example

# Please do not change this file directly since it is managed by Ansible and will be overwritten
[Unit]
Description=Ceph OSD
After=network.target

[Service]
EnvironmentFile=-/etc/environment
ExecStartPre=-/usr/bin/rm -f /%t/%n-pid /%t/%n-cid
ExecStartPre=-/usr/bin/podman rm -f ceph-osd-%i
ExecStart=/usr/bin/podman run -it --entrypoint /bin/bash \
  -d --conmon-pidfile /%t/%n-pid --cidfile /%t/%n-cid \
  --rm \
  --net=host \
  --privileged=true \
  --pid=host \
  --ipc=host \
  --cpus=2 \
  -v /dev:/dev \
  -v /etc/localtime:/etc/localtime:ro \
  -v /var/lib/ceph:/var/lib/ceph:z \
  -v /etc/ceph:/etc/ceph:z \
  -v /var/run/ceph:/var/run/ceph:z \
  -v /var/run/udev/:/var/run/udev/ \
  -v /var/log/ceph:/var/log/ceph:z \
  -e OSD_BLUESTORE=1 -e OSD_FILESTORE=0 -e OSD_DMCRYPT=0 \
  -e CLUSTER=ceph \
  -v /run/lvm/:/run/lvm/ \
  -e CEPH_DAEMON=OSD_CEPH_VOLUME_ACTIVATE \
  -e CONTAINER_IMAGE=registry.redhat.io/rhceph/rhceph-4-rhel8:latest \
  -e OSD_ID=%i \
  -e DEBUG=stayalive \
  --name=ceph-osd-%i \
   \
  registry.redhat.io/rhceph/rhceph-4-rhel8:latest
ExecStop=-/usr/bin/sh -c "/usr/bin/podman rm -f `cat /%t/%n-cid`"
KillMode=none
Restart=always
RestartSec=10s
TimeoutStartSec=120
TimeoutStopSec=15
Type=forking
PIDFile=/%t/%n-pid

[Install]
WantedBy=multi-user.target

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Restart the OSD service associated with the OSD_ID.
Syntax
```
systemctl restart ceph-osd@OSD_ID.service
```
Replace OSD_ID with the ID of the OSD.
Example
```
[root@osd ~]# systemctl restart ceph-osd@0.service
```

Syntax

podman exec -it ceph-osd-OSD_ID /bin/bash

Example

[root@osd ~]# podman exec -it ceph-osd-0 /bin/bash

Get osd fsid and activate the OSD to mount OSD’s logical volume (LV).

Syntax

ceph-volume lvm list |grep -A15 "osd\.OSD_ID"|grep "osd fsid"
ceph-volume lvm activate --bluestore OSD_ID OSD_FSID

Example

[root@osd ~]# ceph-volume lvm list |grep -A15 "osd\.0"|grep "osd fsid"
              osd fsid                  087eee15-6561-40a3-8fe4-9583ba64a4ff
[root@osd ~]# ceph-volume lvm activate --bluestore 0 087eee15-6561-40a3-8fe4-9583ba64a4ff
Running command: /usr/bin/mount -t tmpfs tmpfs /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/ceph-bluestore-tool --cluster=ceph prime-osd-dir --dev /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc --path /var/lib/ceph/osd/ceph-0 --no-mon-config
Running command: /usr/bin/ln -snf /dev/ceph-41c69f8f-30e2-4685-9c5c-c605898c5537/osd-data-d073e8b3-0b89-4271-af5b-83045fd000dc /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -h ceph:ceph /var/lib/ceph/osd/ceph-0/block
Running command: /usr/bin/chown -R ceph:ceph /dev/mapper/ceph--41c69f8f--30e2--4685--9c5c--c605898c5537-osd--data--d073e8b3--0b89--4271--af5b--83045fd000dc
Running command: /usr/bin/chown -R ceph:ceph /var/lib/ceph/osd/ceph-0
Running command: /usr/bin/systemctl enable ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff
 stderr: Created symlink /etc/systemd/system/multi-user.target.wants/ceph-volume@lvm-0-087eee15-6561-40a3-8fe4-9583ba64a4ff.service → /usr/lib/systemd/system/ceph-volume@.service.
Running command: /usr/bin/systemctl enable --runtime ceph-osd@0
 stderr: Created symlink /run/systemd/system/ceph-osd.target.wants/ceph osd@0.service → /usr/lib/systemd/system/ceph-osd@.service.
Running command: /usr/bin/systemctl start ceph-osd@0
 stderr: Running in chroot, ignoring request: start
--> ceph-volume lvm activate successful for osd ID: 0

Get the object’s attributes:

Syntax

ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
get-attrs KEY > OBJECT_ATTRS_FILE_NAME

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}' \
get-attrs "oid" > zone_info.default.attr.txt

Set an object’s attributes:

Syntax

ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
set-attrs KEY < OBJECT_ATTRS_FILE_NAME

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}' \
set-attrs "oid" < zone_info.default.attr.txt

Remove an object’s attributes:

Syntax

ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT  \
rm-attrs KEY

Example

[root@osd ~]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}' \
rm-attrs "oid"

For containerized deployments, to revert the changes, follow the below steps:

After exiting the container, copy /etc/systemd/system/ceph-osd@.service unit file from /root directory.

Example

[root@osd ~]# cp /etc/systemd/system/ceph-osd@.service /root/ceph-osd@.service.modified
[root@osd ~]# cp /root/ceph-osd@.service.backup /etc/systemd/system/ceph-osd@.service

Reload systemd manager configuration.
Example
```
[root@osd ~]# systemctl daemon-reload
```
Move /run/ceph-osd@OSD_ID.service-cid file to /tmp.
Example
```
[root@osd ~]# mv /run/ceph-osd@0.service-cid /tmp
```

Restart the OSD service associated with the OSD_ID.

Syntax

[root@osd ~]# systemctl restart ceph-osd@OSD_ID.service

Example

[root@osd ~]# systemctl restart ceph-osd@0.service

Additional Resources

For more information on stopping an OSD, see the Starting, Stopping, and Restarting the Ceph Daemons by Instance section in the Red Hat Ceph Storage Administration Guide.

10.5. Additional Resources

For Red Hat Ceph Storage support, see the Red Hat Customer Portal.

Select Your Language

Chapter 10. Troubleshooting Ceph objects

10.1. Prerequisites

10.2. Troubleshooting Ceph objects in a containerized environment

10.3. Troubleshooting high-level object operations

10.3.1. Prerequisites

10.3.2. Listing objects

10.3.3. Listing lost objects

10.3.4. Fixing lost objects

10.4. Troubleshooting low-level object operations

10.4.1. Prerequisites

10.4.2. Manipulating the object’s content

10.4.3. Removing an object

10.4.4. Listing the object map

10.4.5. Manipulating the object map header

10.4.6. Manipulating the object map key

10.4.7. Listing the object’s attributes

10.4.8. Manipulating the object attribute key

10.5. Additional Resources

Quick Links

Help

Site Info

Related Sites

About

Red Hat legal and privacy links

Red Hat legal and privacy links

Language and Page Formatting Options

Chapter 10. Troubleshooting Ceph objects

10.1. Prerequisites

10.2. Troubleshooting Ceph objects in a containerized environment

10.3. Troubleshooting high-level object operations

10.3.1. Prerequisites

10.3.2. Listing objects

10.3.3. Listing lost objects

10.3.4. Fixing lost objects

10.4. Troubleshooting low-level object operations

10.4.1. Prerequisites

10.4.2. Manipulating the object’s content

10.4.3. Removing an object

10.4.4. Listing the object map

10.4.5. Manipulating the object map header

10.4.6. Manipulating the object map key

10.4.7. Listing the object’s attributes

10.4.8. Manipulating the object attribute key

10.5. Additional Resources

Quick Links

Help

Site Info

Related Sites

Systems Status

About

Red Hat legal and privacy links

Red Hat legal and privacy links