Procedure

1. In a command terminal, enter the following command to verify that Maven is using JDK 11 and that the Maven version is 3.6.2 or higher:

   mvn --version

2. If the preceding command does not return JDK 11, add the path to JDK 11 to the PATH environment variable and enter the preceding command again.

3. To use the Quarkus Maven plug-in to create a new project, use one of the following methods:

   • Enter the following command:

     mvn io.quarkus:quarkus-maven-plugin:1.3.4.Final-redhat-00004:create \
         -DprojectGroupId=PROJECT_GROUP_ID \
         -DprojectArtifactId=PROJECT_ARTIFACT_ID \
         -DplatformGroupId=com.redhat.quarkus \
         -DplatformArtifactId=quarkus-universe-bom \
         -DplatformVersion=1.3.4.Final-redhat-00004 \
         -DclassName="CLASSNAME"

     In this command, replace the following values:

     • PROJECT_GROUP_ID: A unique identifier of your project
     • PROJECT_ARTIFACT_ID: The name of your project and your project directory
     • CLASSNAME: The fully qualified name of the generated resource, for example org.acme.quarkus.sample.HelloResource

   • Create the project in interactive mode:

     mvn io.quarkus:quarkus-maven-plugin:1.3.4.Final-redhat-00004:create

     When prompted, enter the required attribute values.

     Note

     Alternatively, you can create your project using the default values for the project attributes by entering the following command:

     mvn io.quarkus:quarkus-maven-plugin:1.3.4.Final-redhat-00004:create -B

     The following table lists the attributes that you can define with the create command:

     Attribute	Default Value	Description
     projectGroupId	org.acme.sample	A unique identifier of your project.
     projectArtifactId	none	The name of your project and your project directory. If you do not specify the projectArtifactId, the Maven plug-in starts the interactive mode. If the directory already exists, the generation fails.
     projectVersion	1.0-SNAPSHOT	The version of your project.
     platformGroupId	io.quarkus	The group id of your platform. All the existing platforms are provided by io.quarkus. However, you can change the default value.
     platformArtifactId	quarkus-universe-bom	The artifact id of your platform BOM. To use the locally built Quarkus add quarkus-universe-bom to your pom.xml file.
     platformVersion	The latest platform version	The version of the platform you want to use for your project. You can provide a version range and the Maven plug-in uses the latest version.
     className	None	The fully qualified name of the generated resource. After the application is created, the REST endpoint is exposed at the following URL: http://localhost:8080/$path If you use the default path, the URL is http://localhost:8080/hello.
     path	/hello	The resource path, only if you set the className.
     extensions	[]	The list of extensions you want to add to your project separated by comma.

Procedure

1. Open the pom.xml file in a text editor.

2. Add the Quarkus GAV (group, artifact, version) and use the quarkus-universe-bom file to omit the versions of the different Quarkus dependencies:

   <dependencyManagement>
       <dependencies>
         <dependency>
           <groupId>${quarkus.platform.group-id}</groupId>
           <artifactId>${quarkus.platform.artifact-id}</artifactId>
           <version>${quarkus-plugin.version}</version>
           <type>pom</type>
           <scope>import</scope>
         </dependency>
       </dependencies>
     </dependencyManagement>

3. Add the Quarkus Maven plug-in:

   <build>
       <plugins>
           <plugin>
               <groupId>io.quarkus</groupId>
               <artifactId>quarkus-maven-plugin</artifactId>
               <version>${quarkus-plugin.version}</version>
               <executions>
                   <execution>
                       <goals>
                           <goal>build</goal>
                       </goals>
                   </execution>
               </executions>
           </plugin>
       </plugins>
   </build>

Procedure

1. Navigate to your Quarkus project directory.

2. To list the available extensions, enter the following command:

   ./mvnw quarkus:list-extensions

3. To add an extension to your project, enter the following command where EXTENSION is the group, artifact, version (GAV) of the extension that you want to add:

   ./mvnw quarkus:add-extension -Dextensions="EXTENSION"

   For example, to add the Agroal extension, enter the following command:

   ./mvnw quarkus:add-extension -Dextensions="io.quarkus:quarkus-agroal"

4. To search for a specific extension, enter the extension name or partial name after -Dextensions=. The following example searches for extensions that contain the text jdbc, agroal, and non-exist-ent in the name:

   ./mvnw quarkus:add-extension -Dextensions=jdbc,agroal,non-exist-ent

   This command returns the following result:

   ❌ Multiple extensions matching 'jdbc'
       * io.quarkus:quarkus-jdbc-h2
       * io.quarkus:quarkus-jdbc-mariadb
       * io.quarkus:quarkus-jdbc-postgresql
       Be more specific e.g using the exact name or the full gav.
   ✅ Adding extension io.quarkus:quarkus-agroal
   ❌ Cannot find a dependency matching 'non-exist-ent', maybe a typo?
   [...]

5. To install all extensions that a specific text string returns, enter the extension name or partial name after -Dextensions=. The following example searches for and installs all extensions that begin with hibernate-:

   ./mvnw quarkus:add-extension -Dextensions="hibernate-*"

CodeReady Studio or Eclipse

1. In CodeReady Studio or Eclipse, click File → Import.
2. Select Maven → Existing Maven Project.
3. On the next screen, select the root location of the project. A list of the found modules appears.
4. Select the generated project and click Finish.

5. To start your application, enter the following command in a new terminal window:

   ./mvnw compile quarkus:dev

IntelliJ

1. In IntelliJ, complete one of the following tasks:

   • Select File → New → Project From Existing Sources.
   • On the Welcome page, select Import project.
2. Select the project root directory.
3. Select Import project from external model and then select Maven.
4. Review the options and then click Next.
5. Click Finish.

6. To start your application, enter the following command in a new terminal window:

   ./mvnw compile quarkus:dev

Apache NetBeans

1. Select File → Open Project.
2. Select the project root directory.
3. Click Open Project.

4. To start your application, enter the following command in a new terminal window:

   ./mvnw compile quarkus:dev

Visual Studio Code

1. Install the Java Extension Pack.
2. In Visual Studio Code, open your project directory. The project loads as a Maven project.

Procedure

1. Open the application.properties file in a text editor.

2. Edit the values of properties that you want to change and save the file.

   The following table list the properties that you can change:

   Property	Description	Type	Default
   quarkus.package.main-class	The entry point of the application. In most cases, you should change this value.	string	io.quarkus.runner.GeneratedMain
   quarkus.package.type	The requested output type.	string	jar
   quarkus.package.uber-jar	Whether or not the Java runner should be packed as an uber-JAR.	boolean	false
   quarkus.package.manifest.add-implementation-entries	Whether or not the implementation information should be included in the runner JAR file’s MANIFEST.MF file.	boolean	true
   quarkus.package.user-configured-ignored-entries	Files that should not be copied to the output artifact.	string (list)
   quarkus.package.runner-suffix	The suffix that is applied to the runner JAR file.	string	-runner
   quarkus.package.output-directory	The output folder for the application build. This is resolved relative to the build system target directory.	string
   quarkus.package.output-name	The name of the final artifact.	string

Procedure

1. Add the plug-in configuration to the pom.xml file:

   <project>
       [...]
         <plugin>
             <groupId>io.quarkus</groupId>
             <artifactId>quarkus-bootstrap-maven-plugin</artifactId>
             <version>${quarkus-plugin.version}</version>
         </plugin>
       [...]
   </project>

2. To list the build dependency tree of your application, enter the following command:

   ./mvnw quarkus-bootstrap:build-tree

3. The output of this command should be similar to the following example:

   [INFO] --- quarkus-bootstrap-maven-plugin:1.3:build-tree (default-cli) @ getting-started ---
   [INFO] org.acme:getting-started:jar:1.0-SNAPSHOT
   [INFO] └─ io.quarkus:quarkus-resteasy-deployment:jar:1.3 (compile)
   [INFO]    ├─ io.quarkus:quarkus-resteasy-server-common-deployment:jar:1.3 (compile)
   [INFO]    │  ├─ io.quarkus:quarkus-core-deployment:jar:1.3 (compile)
   [INFO]    │  │  ├─ commons-beanutils:commons-beanutils:jar:1.9.3 (compile)
   [INFO]    │  │  │  ├─ commons-logging:commons-logging:jar:1.2 (compile)
   [INFO]    │  │  │  └─ commons-collections:commons-collections:jar:3.2.2 (compile)
   ...

Procedure

1. To start Quarkus in development mode, enter the following command in the directory that contains your Quarkus application pom.xml file:

   ./mvnw quarkus:dev

2. Make changes to your application and save the files.

3. Refresh the browser to trigger a scan of the workspace.

   If any changes are detected, the Java files are recompiled and the application is redeployed. Your request is then serviced by the redeployed application. If there are any issues with compilation or deployment, an error page appears.

   In development mode, the debugger is activated and listens on port 5005.

4. Optional: To wait for the debugger to attach before running the application, include -Dsuspend:

   ./mvnw quarkus:dev -Dsuspend

5. Optional: To prevent the debugger from running, include -Ddebug=false:

   ./mvnw quarkus:dev -Ddebug=false

Control the debugger through system properties

1. Change one of the following values of the debug system property where PORT is the port that the debugger is listening on:

   • false: The JVM starts with debug mode disabled.
   • true: The JVM starts in debug mode and is listening on port 5005.
   • client: The JVM starts in client mode and tries to connect to localhost:5005.
   • PORT: The JVM starts in debug mode and is listening on PORT.

2. Change the value of the suspend system property. This property is used when Quarkus starts in debug mode.

   • y or true: The debug mode JVM launch suspends.
   • n or false: The debug mode JVM starts without suspending.

Control the debugger from the command line

1. To start your Quarkus application in debug mode with JVM, enter the following command:

   ./mvnw compile quarkus:dev -Ddebug

2. Attach a debugger to localhost:5005.