Menu Close

Red Hat Training

A Red Hat training course is available for Red Hat AMQ

Using the AMQ Python Client

Red Hat JBoss AMQ 7.0

For Use with AMQ Clients 1.2

Abstract

This guide describes how to install and configure the client, run hands-on examples, and use your client with other AMQ components.

Chapter 1. Overview

AMQ Python is a Python library for writing messaging applications. It allows you to write client and server applications that send and receive AMQP messages.

AMQ Python is part of AMQ Clients, a suite of messaging libraries supporting multiple languages and platforms. See Introducing Red Hat JBoss AMQ 7 for an overview of the clients and other AMQ components. See AMQ Clients 1.2 Release Notes for information about this release.

AMQ Python is based on the Proton API from Apache Qpid.

1.1. Key Features

AMQ Python is a flexible and capable messaging API. It enables any application to speak AMQP 1.0.

  • An event-driven API that simplifies integration with existing applications
  • Access to all the features and capabilities of AMQP 1.0
  • SSL/TLS and SASL for secure communication
  • Seamless conversion between AMQP and language-native data types
  • Heartbeating and automatic reconnect for reliable network connections

1.2. Supported Standards and Protocols

AMQ Python supports the following industry-recognized standards and network protocols.

1.3. Supported Configurations

AMQ Python supports the following OS and language versions. See Red Hat JBoss AMQ 7 Supported Configurations for more information.

AMQ Python is supported on Red Hat Enterprise Linux 6 and 7 with Python 2.6 and 2.7.

1.4. Terms and Concepts

This section introduces the core API entities and describes how they operate together.

Table 1.1. API Terms

EntityDescription

Container

A top-level container of connections

Connection

A channel for communication between two peers on a network

Session

A serialized context for producing and consuming messages

Sender

A channel for sending messages to a target

Receiver

A channel for receiving messages from a source

Source

A named point of origin for messages

Target

A named destination for messages

Message

A mutable holder of application content

Delivery

A message transfer

AMQ Python sends and receives messages. Messages are transferred between connected peers over senders and receivers. Senders and receivers are established over sessions. Sessions are established over connections. Connections are established between two uniquely identified containers. Though a connection can have multiple sessions, often this is not needed. The API allows you to ignore sessions unless you require them.

A sending peer creates a sender to send messages. The sender has a target that identifies a queue or topic at the remote peer. A receiving peer creates a receiver to receive messages. The receiver has a source that identifies a queue or topic at the remote peer.

The sending of a message is called a delivery. The message is the content sent, including all metadata such as headers and annotations. The delivery is the protocol exchange associated with the transfer of that content.

To indicate that a delivery is complete, either the sender or the receiver settles it. When the other side learns that it has been settled, it will no longer communicate about that delivery. The receiver can also indicate whether it accepts or rejects the message.

1.5. Document Conventions

In this document, sudo is used for any command that requires root privileges. You should always exercise caution when using sudo, as any changes can affect the entire system.

For more information about using sudo, see The sudo Command.

Chapter 2. Installation

This chapter guides you through the steps required to install AMQ Python in your environment.

2.1. Prerequisites

To begin installation, use your subscription to access AMQ distribution archives and package repositories.

2.2. Installing on Red Hat Enterprise Linux

AMQ Python is distributed as a set of RPM packages for Red Hat Enterprise Linux. Follow these steps to install them.

  1. Use the subscription-manager command to subscribe to the required package repositories.

    Red Hat Enterprise Linux 6

    $ sudo subscription-manager repos --enable=a-mq-clients-1-for-rhel-6-server-rpms

    Red Hat Enterprise Linux 7

    $ sudo subscription-manager repos --enable=a-mq-clients-1-for-rhel-7-server-rpms

  2. Use the yum command to install the python-qpid-proton and python-qpid-proton-docs packages.

    $ sudo yum install python-qpid-proton python-qpid-proton-docs

Chapter 3. Getting Started

This chapter guides you through a simple exercise to help you get started using AMQ Python. Before starting, make sure you have completed the steps in the Chapter 2, Installation chapter for your environment.

3.1. Preparing the Broker

The example programs require a running broker with a queue named examples. Follow these steps to define the queue and start the broker.

  1. Install the broker.
  2. Create a broker instance. Enable anonymous access.
  3. Start the broker instance and check the console for any critical errors logged during startup.

    $ BROKER_INSTANCE_DIR/bin/artemis run
    [...]
    14:43:20,158 INFO  [org.apache.activemq.artemis.integration.bootstrap] AMQ101000: Starting ActiveMQ Artemis Server
    [...]
    15:01:39,686 INFO  [org.apache.activemq.artemis.core.server] AMQ221020: Started Acceptor at 0.0.0.0:5672 for protocols [AMQP]
    [...]
    15:01:39,691 INFO  [org.apache.activemq.artemis.core.server] AMQ221007: Server is now live
  4. Use the artemis queue command to create a queue called examples.

    $ BROKER_INSTANCE_DIR/bin/artemis queue create --name examples --auto-create-address --anycast

    You are prompted to answer a series of questions. For yes|no questions, type N; otherwise, press Enter to accept the default value.

3.2. Running Hello World

The Hello World example sends a message to the examples queue on the broker and then fetches it back. On success it prints Hello World! to the console.

Using a new terminal window, change directory to the Python examples directory and run the helloworld.py example.

$ cd /usr/share/proton-0.18.0/examples/python/
$ python helloworld.py
Hello World!

Chapter 4. Examples

This chapter demonstrates the use of AMQ Python through example programs. To run them, make sure you have completed the steps in the Chapter 2, Installation chapter for your environment and you have a running and configured broker.

See the Qpid Proton Python examples for more sample programs.

4.1. Sending Messages

This client program connects to a server using CONNECTION_URL, creates a sender for target ADDRESS, sends a message containing MESSAGE_BODY, closes the connection, and exits.

Example: Sending Messages

from __future__ import print_function

import sys

from proton import Message
from proton.handlers import MessagingHandler
from proton.reactor import Container

class SendHandler(MessagingHandler):
    def __init__(self, conn_url, address, message_body):
        super(SendHandler, self).__init__()

        self.conn_url = conn_url
        self.address = address
        self.message_body = message_body

    def on_start(self, event):
        conn = event.container.connect(self.conn_url)
        event.container.create_sender(conn, self.address)

    def on_link_opened(self, event):
        print("SEND: Opened sender for target address '{0}'".format
              (event.sender.target.address))

    def on_sendable(self, event):
        message = Message(self.message_body)
        event.sender.send(message)

        print("SEND: Sent message '{0}'".format(message.body))

        event.sender.close()
        event.connection.close()

def main():
    try:
        conn_url, address, message_body = sys.argv[1:4]
    except ValueError:
        sys.exit("Usage: send.py CONNECTION-URL ADDRESS MESSAGE-BODY")

    handler = SendHandler(conn_url, address, message_body)
    container = Container(handler)
    container.run()

if __name__ == "__main__":
    try:
        main()
    except KeyboardInterrupt:
        pass

Running the Example

To run the example program, copy it to a local file and invoke it using the python command.

$ python send.py amqp://localhost queue1 hello

4.2. Receiving Messages

This client program connects to a server using CONNECTION_URL, creates a receiver for source ADDRESS, and receives messages until it is terminated or it reaches COUNT messages.

Example: Receiving Messages

from __future__ import print_function

import sys

from proton.handlers import MessagingHandler
from proton.reactor import Container

class ReceiveHandler(MessagingHandler):
    def __init__(self, conn_url, address, desired):
        super(ReceiveHandler, self).__init__()

        self.conn_url = conn_url
        self.address = address
        self.desired = desired
        self.received = 0

    def on_start(self, event):
        conn = event.container.connect(self.conn_url)
        event.container.create_receiver(conn, self.address)

    def on_link_opened(self, event):
        print("RECEIVE: Created receiver for source address '{0}'".format
              (self.address))

    def on_message(self, event):
        message = event.message

        print("RECEIVE: Received message '{0}'".format(message.body))

        self.received += 1

        if self.received == self.desired:
            event.receiver.close()
            event.connection.close()

def main():
    try:
        conn_url, address = sys.argv[1:3]
    except ValueError:
        sys.exit("Usage: receive.py CONNECTION-URL ADDRESS [MESSAGE-COUNT]")

    try:
        desired = int(sys.argv[3])
    except (IndexError, ValueError):
        desired = 0

    handler = ReceiveHandler(conn_url, address, desired)
    container = Container(handler)
    container.run()

if __name__ == "__main__":
    try:
        main()
    except KeyboardInterrupt:
        pass

Running the Example

To run the example program, copy it to a local file and invoke it using the python command.

$ python receive.py amqp://localhost queue1

Chapter 5. Using the API

This chapter explains how to use the AMQ Python API to perform common messaging tasks.

5.1. Basic Operation

5.1.1. Handling Messaging Events

AMQ Python is an asynchronous event-driven API. To define how the application handles events, the user implements callback methods on the MessagingHandler class. These methods are then called as network activity or timers trigger new events.

Example: Handling Messaging Events

class ExampleHandler(MessagingHandler):
    def on_start(self, event):
        print("The container event loop has started")

    def on_sendable(self, event):
        print("A message can be sent")

    def on_message(self, event):
        print("A message is received")

These are only a few common-case events. The full set is documented in the API reference.

5.1.2. Creating a Container

The container is the top-level API object. It is the entry point for creating connections, and it is responsible for running the main event loop. It is often constructed with a global event handler.

Example: Creating a Container

handler = ExampleHandler()
container = Container(handler)
container.run()

Setting the Container Identity

Each container instance has a unique identity called the container ID. When AMQ Python makes a connection, it sends the container ID to the remote peer. To set the container ID, pass it to the Container constructor.

Example: Setting the Container Identity

container = Container(handler, "job-processor-3")

If the user does not set the ID, the library will generate a UUID when the container is constucted.

5.2. Network Connections

5.2.1. Connection URLs

Connection URLs encode the information used to establish new connections.

Connection URL Syntax

scheme://host[:port]

  • Scheme - The connection transport, either amqp for unencrypted TCP or amqps for TCP with SSL/TLS encryption.
  • Host - The remote network host. The value can be a hostname or a numeric IP address. IPv6 addresses must be enclosed in square brackets.
  • Port - The remote network port. This value is optional. The default value is 5672 for the amqp scheme and 5671 for the amqps scheme.

Connection URL Examples

amqps://example.com
amqps://example.net:56720
amqp://127.0.0.1
amqp://[::1]:2000

5.2.2. Creating Outgoing Connections

To connect to a remote server, call the Container.connect() method with a connection URL. This is typically done inside the MessagingHandler.on_start() method.

Example: Creating Outgoing Connections

class ExampleHandler(MessagingHandler):
    def on_start(self, event):
        event.container.connect("amqp://example.com")

    def on_connection_opened(self, event):
        print("Connection {0} is open".format(event.connection))

See the Section 5.3, “Security” section for information about creating secure connections.

5.2.3. Configuring Reconnect

Reconnect allows a client to recover from lost connections. It is used to ensure that the components in a distributed system reestablish communication after temporary network or component failures.

AMQ Python enables reconnect by default. If a connection is lost or a connection attempt fails, the client will try again after a brief delay. The delay increases exponentially for each new attempt, up to a default maximum of 10 seconds.

To disable reconnect, set the reconnect connection option to False.

Example: Disabling Reconnect

container.connect("amqp://example.com", reconnect=False)

To control the delays between connection attempts, define a class implementing the reset and next methods and set the reconnect connection option to an instance of that class.

Example: Configuring Reconnect

class ExampleReconnect(object):
    def init(self):
        self.delay = 0

    def reset(self):
        self.delay = 0

    def next(self):
        if self.delay == 0:
            self.delay = 0.1
        else:
            self.delay = min(10, 2 * self.delay)

        return self.delay

container.connect("amqp://example.com", reconnect=ExampleReconnect())

The next method returns the next delay in seconds. The reset method is called once before the reconnect process begins.

5.2.4. Configuring Failover

AMQ Python allows you to configure multiple connection endpoints. If connecting to one fails, the client attempts to connect to the next in the list. If the list is exhausted, the process starts over.

To specify multiple connection endpoints, set the urls connection option to a list of connection URLs.

Example: Configuring Failover

urls = ["amqp://alpha.example.com", "amqp://beta.example.com"]
container.connect(urls=urls)

It is an error to use the url and urls options at the same time.

5.3. Security

5.3.1. Securing Connections with SSL/TLS

AMQ Python uses SSL/TLS to encrypt communication between clients and servers.

To connect to a remote server with SSL/TLS, use a connection URL with the amqps scheme.

Example: Enabling SSL/TLS

container.connect("amqps://example.com")

5.3.2. Connecting with a User and Password

AMQ Python can authenticate connections with a user and password.

To specify the credentials used for authentication, set the user and password options on the connect method.

Example: Connecting with a User and Password

container.connect("amqps://example.com", user="alice", password="secret")

5.3.3. Configuring SASL Authentication

AMQ Python uses the SASL protocol to perform authentication. SASL can use a number of different authentication mechanisms. When two network peers connect, they exchange their allowed mechanisms, and the strongest mechanism allowed by both is selected.

Note

The client uses Cyrus SASL to perform authentication. Cyrus SASL uses plug-ins to support specific SASL mechanisms. Before you can use a particular SASL mechanism, the relevant plug-in must be installed. For example, you need the cyrus-sasl-plain plug-in in order to use SASL PLAIN authentication.

To see a list of Cyrus SASL plug-ins in Red Hat Enterprise Linux, use the yum search cyrus-sasl command. To install a Cyrus SASL plug-in, use the yum install PLUG-IN command.

By default, AMQ Python allows all of the mechanisms supported by the local SASL library configuration. To restrict the allowed mechanisms and thereby control what mechanisms can be negotiated, use the allowed_mechs connection option. It takes a string containing a space-separated list of mechanism names.

Example: Configuring SASL Authentication

container.connect("amqps://example.com", allowed_mechs="ANONYMOUS")

This example forces the connection to authenticate using the ANONYMOUS mechanism even if the server we connect to offers other options. Valid mechanisms include ANONYMOUS, PLAIN, SCRAM-SHA-256, SCRAM-SHA-1, GSSAPI, and EXTERNAL.

AMQ Python enables SASL by default. To disable it, set the sasl_enabled connection option to false.

Example: Disabling SASL

event.container.connect("amqps://example.com", sasl_enabled=False)

5.3.4. Authenticating Using Kerberos

Kerberos is a network protocol for centrally managed authentication based on the exchange of encrypted tickets. See Using Kerberos for more information.

  1. Configure Kerberos in your operating system. See Configuring Kerberos to set up Kerberos on Red Hat Enterprise Linux.
  2. Enable the GSSAPI SASL mechanism in your client application.

    container.connect("amqps://example.com", allowed_mechs="GSSAPI")
  3. Use the kinit command to authenticate your user credentials and store the resulting Kerberos ticket.

    $ kinit USER@REALM
  4. Run the client program.

5.4. More Information

For more information, see the API reference.

Chapter 6. Interoperability

This chapter discusses how to use AMQ Python in combination with other AMQ components. For an overview of the compatibility of AMQ components, see the product introduction.

6.1. Interoperating with Other AMQP Clients

AMQP messages are composed using the AMQP type system. This common format is one of the reasons AMQP clients in different languages are able to interoperate with each other.

When sending messages, AMQ Python automatically converts language-native types to AMQP-encoded data. When receiving messages, the reverse conversion takes place.

Note

More information about AMQP types is available at the interactive type reference maintained by the Apache Qpid project.

Table 6.1. AMQ Python and AMQP Types

AMQ Python TypeAMQP TypeDescription

None

null

An empty value

bool

boolean

A true or false value

proton.char

char

A single Unicode character

unicode

string

A sequence of Unicode characters

bytes

binary

A sequence of bytes

proton.byte

byte

A signed 8-bit integer

proton.short

short

A signed 16-bit integer

proton.int32

int

A signed 32-bit integer

long

long

A signed 64-bit integer

proton.ubyte

ubyte

An unsigned 8-bit integer

proton.ushort

ushort

An unsigned 16-bit integer

proton.uint

uint

An unsigned 32-bit integer

proton.ulong

ulong

An unsigned 64-bit integer

proton.float32

float

A 32-bit floating point number

float

double

A 64-bit floating point number

proton.Array

array

A sequence of values of a single type

list

list

A sequence of values of variable type

dict

map

A mapping from distinct keys to values

uuid.UUID

uuid

A universally unique identifier

proton.symbol

symbol

A 7-bit ASCII string from a constrained domain

proton.timestamp

timestamp

An absolute point in time

Table 6.2. AMQ Python and Other AMQ Client Types

AMQ PythonAMQ C++AMQ JavaScriptAMQ .NET

None

nullptr

null

null

bool

bool

boolean

System.Boolean

proton.char

wchar_t

-

System.Char

unicode

std::string

string

System.String

bytes

proton::binary

wrap_binary(string)

System.Byte[]

proton.byte

int8_t

wrap_byte(number)

System.SByte

proton.short

int16_t

wrap_short(number)

System.Int16

proton.int32

int32_t

wrap_int(number)

System.Int32

long

int64_t

wrap_long(number)

System.Int64

proton.ubyte

uint8_t

wrap_ubyte(number)

System.Byte

proton.ushort

uint16_t

wrap_ushort(number)

System.UInt16

proton.uint

uint32_t

wrap_uint(number)

System.UInt32

proton.ulong

uint64_t

wrap_ulong(number)

System.UInt64

proton.float32

float

wrap_float(number)

System.Single

float

double

wrap_double(number)

System.Double

proton.Array

-

wrap_array(Array, code)

-

list

std::vector

wrap_list(Array)

Amqp.List

dict

std::map

wrap_map(object)

Amqp.Map

uuid.UUID

proton::uuid

-

System.Guid

proton.symbol

proton::symbol

wrap_symbol(string)

Amqp.Symbol

proton.timestamp

proton::timestamp

wrap_timestamp(number)

System.DateTime

6.2. Interoperating with AMQ JMS

AMQP defines a standard mapping to the JMS messaging model. This section discusses the various aspects of that mapping. For more information, see the AMQ JMS Interoperability chapter.

JMS Message Types

AMQ Python provides a single message type whose body type can vary. By contrast, the JMS API uses different message types to represent different kinds of data. The table below indicates how particular body types map to JMS message types.

For more explicit control of the resulting JMS message type, you can set the x-opt-jms-msg-type message annotation. See the AMQ JMS Interoperability chapter for more information.

Table 6.3. AMQ Python and JMS Message Types

AMQ Python Body TypeJMS Message Type

unicode

TextMessage

None

TextMessage

bytes

BytesMessage

Any other type

ObjectMessage

6.3. Connecting to AMQ Broker

AMQ Broker is designed to interoperate with AMQP 1.0 clients. Check the following to ensure the broker is configured for AMQP messaging.

  • Port 5672 in the network firewall is open.
  • The AMQ Broker AMQP acceptor is enabled. See Configuring Network Access.
  • The necessary addresses are configured on the broker. See Addresses, Queues, and Topics.
  • The broker is configured to permit access from your client, and the client is configured to send the required credentials. See Broker Security.

6.4. Connecting to AMQ Interconnect

AMQ Interconnect works with any AMQP 1.0 client. Check the following to ensure the components are configured correctly.

  • Port 5672 in the network firewall is open.
  • The router is configured to permit access from your client, and the client is configured to send the required credentials. See Interconnect Security.

Appendix A. Using Your Subscription

AMQ is provided through a software subscription. To manage your subscriptions, access your account at the Red Hat Customer Portal.

Accessing Your Account

  1. Go to access.redhat.com.
  2. If you do not already have an account, create one.
  3. Log in to your account.

Activating a Subscription

  1. Go to access.redhat.com.
  2. Navigate to My Subscriptions.
  3. Navigate to Activate a subscription and enter your 16-digit activation number.

Downloading Zip and Tar Files

To access zip or tar files, use the customer portal to find the relevant files for download. If you are using RPM packages, this step is not required.

  1. Go to access.redhat.com.
  2. Navigate to DOWNLOADS.
  3. Locate the Red Hat JBoss AMQ entry in the JBOSS INTEGRATION AND AUTOMATION category.
  4. Select the desired component type from the drop-down menu on the right side of the entry.
  5. Select the Download link for your component.

Registering Your System for Packages

To install RPM packages on Red Hat Enterprise Linux, your system must be registered. If you are using zip or tar files, this step is not required.

  1. Go to access.redhat.com.
  2. Navigate to Registration Assistant.
  3. Select your OS version and continue to the next page.
  4. Use the listed command in your system terminal to complete the registration.

To learn more see How to Register and Subscribe a System to the Red Hat Customer Portal.

Revised on 2017-12-15 13:52:51 EST

Legal Notice

Copyright © 2017 Red Hat, Inc.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat Software Collections is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.