Language:
Format:

Installing

Red Hat Advanced Cluster Security for Kubernetes 3.73

Installing Red Hat Advanced Cluster Security for Kubernetes

Red Hat OpenShift Documentation Team

Abstract

This document describes how to install Red Hat Advanced Cluster Security for Kubernetes by using the Operator, Helm charts, or the roxctl CLI.

Chapter 1. Installation platforms and methods

Red Hat Advanced Cluster Security for Kubernetes and Red Hat Advanced Cluster Security Cloud Service are supported on various platforms, such as Red Hat OpenShift and Kubernetes platforms.

1.1. Installation methods for different platforms

You can perform different types of installations on different platforms.

Note

Not all installation options are supported for all platforms, as shown in the following tables. Red Hat recommends that you do not use the roxctl install method unless you have a specific installation need that requires using this method.

Table 1.1. Recommended installation methods

Platform	Installation steps	Supported installation methods
Red Hat OpenShift Container Platform (OCP) 4.x Red Hat OpenShift Kubernetes Engine (OKE) 4.x Red Hat OpenShift Dedicated (OSD) Azure Red Hat OpenShift (ARO) Red Hat OpenShift Service on Amazon Web Services (ROSA)	Installing RHACS on Red Hat OpenShift Installing ACSCS on Red Hat OpenShift	Operator (recommended) Helm charts `roxctl` CLI
Amazon Elastic Kubernetes Service (EKS) Google Kubernetes Engine (GKE) Microsoft Azure Kubernetes Service (AKS)	Installing RHACS on other platforms Installing ACSCS on other platforms	Helm charts (recommended) `roxctl` CLI

Chapter 2. Getting started with RHACS Cloud Service

Red Hat Advanced Cluster Security Cloud Service (ACSCS) provides security services for your Kubernetes clusters on different platforms.

This topic provides instructions to get started using ACSCS on Red Hat OpenShift, including OpenShift Container Platform, OpenShift Kubernetes Engine (OKE), Red Hat OpenShift Dedicated (OSD), Azure Red Hat OpenShift (ARO), and Red Hat OpenShift Service on Amazon Web Services (ROSA). See the inline notes for information that differs for ACSCS on other Kubernetes platforms.

This installation example shows you how to set up ACSCS on OpenShift Container Platform using the Operator. It does not cover installations using Helm charts or the roxctl CLI.

Prerequisites

Ensure that you can access the Advanced Cluster Security menu option from the Red Hat Hybrid Cloud Console.

2.1. Accessing the ACS Console

In the Red Hat Hybrid Cloud Console, from the navigation menu, select Advanced Cluster Security → ACS Instances, and then select the instance that you want connected to your secured clusters.
- In the Instance Details section, note the Central API Endpoint. You use this address when creating secured clusters.
Click Open ACS Console. You need your Red Hat Single Sign-On (RH-SSO) credentials, or credentials for another identity provider if that has been configured.

2.2. Creating an RHACS Cloud Service project

In your OpenShift Container Platform cluster, navigate to Home → Projects and create a project for ACSCS. Red Hat suggests using stackrox as the project Name.

2.3. Generating an init bundle

In the ACS console, navigate to Platform Configuration → Integrations.
Navigate to the Authentication Tokens section and click on Cluster Init Bundle.
Click Generate bundle.
Enter a name for the cluster init bundle and click Generate.
Click Download Kubernetes Secret File to download the generated bundle.
Important
Store this bundle securely because it contains secrets. You can use the same bundle to create multiple secured clusters.

2.4. Applying an init bundle by creating resources

Using a terminal window, log in to your OpenShift Container Platform cluster, and using the Red Hat OpenShift CLI, run the following command to create the resources:
```
$ oc create -f <init_bundle>.yaml \ 1
  -n <stackrox> 2
```
1
Specify the file name of the init bundle containing the secrets.
2
Specify the name of the project you created on your OpenShift Container Platform cluster (for example, stackrox).

Note

For non-OpenShift Kubernetes clusters, enter the comparable kubectl commands to create the resources.

2.5. Installing secured cluster resources on each cluster

These steps assume that you are installing resources by using the Operator.

Note

For installation on non-OpenShift Kubernetes clusters, you must use Helm charts or the roxctl CLI to install secured cluster resources.

2.5.1. Installing the Operator on the cluster

On your cluster, in the web console, go to the Operators → OperatorHub page.
If Red Hat Advanced Cluster Security for Kubernetes is not displayed, enter Advanced Cluster Security into the Filter by keyword box to find the Red Hat Advanced Cluster Security for Kubernetes Operator.
Select the Red Hat Advanced Cluster Security for Kubernetes Operator to view the details page.
Read the information about the Operator and click Install.
On the Install Operator page:
- Keep the default value for Installation mode as All namespaces on the cluster.
- Choose a specific namespace for the Installed namespace field. Red Hat recommends installing the Red Hat Advanced Cluster Security for Kubernetes Operator in the rhacs-operator namespace.
- Select automatic or manual updates for Update approval. Red Hat recommends that you select automatic updates and choose the latest option for the Operator channel.
Click Install.

Verification

After the installation completes, navigate to Operators → Installed Operators to verify that the Red Hat Advanced Cluster Security for Kubernetes Operator is listed with the status of Succeeded.

2.5.2. Creating Secured Cluster resources

On your cluster, navigate to Operators → Installed Operators.
Click the Project menu and select the stackrox namespace.
Under Provided APIs, select Secured Cluster.
In the SecuredClusters page, click Create SecuredCluster.
Select Form view.
Enter the new project name by accepting or editing the default name. The default value is stackrox-secured-cluster-services.
Optional: Add any labels for the cluster.
Enter a unique name for your SecuredCluster custom resource.
Enter the Central API Endpoint, including the address and the port number. You can view this information again in the Red Hat Hybrid Cloud Console console by choosing Advanced Cluster Security → ACS Instances, and then clicking the ACS instance you created.
Click Create.

2.5.3. Verifying RHACS Cloud Service installation

To verify installation, access your ACS Console from the Red Hat Hybrid Cloud Console. The Dashboard displays the number of clusters that ACSCS is monitoring, along with information about nodes, deployments, images, and violations.

If no data appears in the ACS Console:

Ensure that at least one secured cluster is connected to your ACSCS instance. For more information, see the "Installing secured cluster resources on each cluster" section.
Examine your Sensor pod logs to ensure that the connection to your ACSCS instance is successful.
In the OCP cluster, navigate to Platform Configuration → Clusters to verify that the components are healthy and view additional operational information.
Examine the values in the SecuredCluster API in the Operator on your local cluster to ensure that the Central API Endpoint has been entered correctly. This value should be the same value as shown in the ACS instance details in the Red Hat Hybrid Cloud Console.

Chapter 3. Installing RHACS on Red Hat OpenShift

3.1. High-level overview of installing RHACS on Red Hat OpenShift

Red Hat Advanced Cluster Security for Kubernetes (RHACS) provides security services for your self-managed Red Hat OpenShift Kubernetes systems.

Before you install:

Understand the installation platforms and methods.
Understand Red Hat Advanced Cluster Security for Kubernetes architecture.
Review the prerequisites.

The following list provides a high-level overview of installation steps:

Install Central services on a cluster using the Operator, Helm charts, or the roxctl CLI.
Generate and apply an init bundle.
Install secured cluster resources on each of your secured clusters.

3.2. Prerequisites for RHACS on Red Hat OpenShift

Before you install RHACS for OpenShift Container Platform or another OCP-compatible supported Kubernetes platform, ensure you have met the prerequisites.

3.2.1. General requirements

RHACS has some system requirements that must be met before installing.

Warning

You must not install Red Hat Advanced Cluster Security for Kubernetes on:

Amazon Elastic File System (Amazon EFS). Use the Amazon Elastic Block Store (Amazon EBS) with the default gp2 volume type instead.
Older CPUs that do not have the Streaming SIMD Extensions (SSE) 4.2 instruction set. For example, Intel processors older than Sandy Bridge and AMD processors older than Bulldozer. (These processors were released in 2011.)

To install Red Hat Advanced Cluster Security for Kubernetes, you must have:

Cluster nodes with a supported operating system. For more information, see the Red Hat Advanced Cluster Security for Kubernetes Support Policy.
- Operating system: Amazon Linux, CentOS, Container-Optimized OS from Google, Red Hat Enterprise Linux CoreOS (RHCOS), Debian, Red Hat Enterprise Linux (RHEL), or Ubuntu.
- Processor and memory: 2 CPU cores and at least 3GiB of RAM.
  Note
  For deploying Central, use a machine type with four or more cores and apply scheduling policies to launch Central on such nodes.
- Architectures: AMD64 or ppc64le.
  Note
  You can only install RHACS Secured cluster services on {ibm-power}, {ibm-zsystems}, and {ibm-linuxone} clusters. Central is not supported at this time.
Persistent storage by using persistent volume claim (PVC).
Important
You must not use Ceph FS storage with Red Hat Advanced Cluster Security for Kubernetes. Red Hat recommends using RBD block mode PVCs for Red Hat Advanced Cluster Security for Kubernetes.
- Use Solid-State Drives (SSDs) for best performance. However, you can use another storage type if you do not have SSDs available.

To install using Helm charts:

You must have Helm command-line interface (CLI) v3.2 or newer, if you are installing or configuring Red Hat Advanced Cluster Security for Kubernetes using Helm charts. Use the helm version command to verify the version of Helm you have installed.
You must have access to the Red Hat Container Registry. For information about downloading images from registry.redhat.io, see Red Hat Container Registry Authentication.

3.2.2. Prerequisites for installing Central

A single containerized service called Central handles data persistence, API interactions, and user interface (Portal) access.

Central requires persistent storage:

You can provide storage with a persistent volume claim (PVC).
Note
You can use a hostPath volume for storage only if all your hosts (or a group of hosts) mount a shared file system, such as an NFS share or a storage appliance. Otherwise, your data is only saved on a single node. Red Hat does not recommend using a hostPath volume.
Use Solid-State Drives (SSD) for best performance. However, you can use another storage type if you do not have SSDs available.
If you use a web proxy or firewall, you must configure bypass rules to allow traffic for the definitions.stackrox.io and collector-modules.stackrox.io domains and enable Red Hat Advanced Cluster Security for Kubernetes to trust your web proxy or firewall. Otherwise, updates for vulnerability definitions and kernel support packages will fail.
Red Hat Advanced Cluster Security for Kubernetes requires access to:
- definitions.stackrox.io for downloading updated vulnerability definitions. Vulnerability definition updates allow Red Hat Advanced Cluster Security for Kubernetes to maintain up-to-date vulnerability data when new vulnerabilities are discovered or additional data sources are added.
- collector-modules.stackrox.io to download updated kernel support packages. Updated Kernel support packages ensure that Red Hat Advanced Cluster Security for Kubernetes can monitor the latest operating systems and collect data about the network traffic and processes running inside the containers. Without these updates, Red Hat Advanced Cluster Security for Kubernetes might fail to monitor containers if you add new nodes in your cluster or if you update your nodes' operating system.

Note

For security reasons, you should deploy Central in a cluster with limited administrative access.

Memory and storage requirements

The following table lists the minimum memory and storage values required to install and run Central.

Central	CPU	Memory	Storage
Request	1.5 cores	4 GiB	100 GiB
Limit	4 cores	8 GiB	100 GiB

Sizing guidelines

Use the following compute resources and storage values depending upon the number of nodes in your cluster.

Nodes	Deployments	CPU	Memory	Storage
Up to 100	Up to 1000	2 cores	4 GiB	100 GiB
Up to 500	Up to 2000	4 cores	8 GiB	100 GiB
More than 500	More than 2000	8 cores	12 - 16 GiB	100 - 200 GiB

3.2.3. Prerequisites for installing Scanner

Red Hat Advanced Cluster Security for Kubernetes includes an image vulnerability scanner called Scanner. This service scans images that are not already scanned by scanners integrated into image registries.

Memory and storage requirements

Scanner	CPU	Memory
Request	1.2 cores	2700 MiB
Limit	5 cores	8000 MiB

3.2.4. Prerequisites for installing Sensor

Sensor monitors your Kubernetes and OpenShift Container Platform clusters. These services currently deploy in a single deployment, which handles interactions with the Kubernetes API and coordinates with Collector.

Memory and storage requirements

Sensor	CPU	Memory
Request	1 core	1 GiB
Limit	2 cores	4 GiB

3.2.5. Prerequisites for installing Admission controller

The Admission controller prevents users from creating workloads that violate policies you configure.

Memory and storage requirements

By default, the admission control service runs 3 replicas. The following table lists the request and limits for each replica.

Admission controller	CPU	Memory
Request	.05 cores	100 MiB
Limit	.5 cores	500 MiB

3.2.6. Prerequisites for installing Collector

Collector monitors runtime activity on each node in your secured clusters. It connects to Sensor to report this information.

Caution

To install Collector on systems that have Unified Extensible Firmware Interface (UEFI) and that have Secure Boot enabled, you must use eBPF probes because kernel modules are unsigned, and the UEFI firmware cannot load unsigned packages. Collector identifies Secure Boot status at the start and switches to eBPF probes if required.

Memory and storage requirements

Collector	CPU	Memory
Request	.05 cores	320 MiB
Limit	.75 cores	1 GiB

Note

Collector uses a mutable image tag (<version>-latest), so you get support for newer Linux kernel versions more easily. There is no change in code, pre-existing kernel modules, or eBPF programs for image updates. Updates only add a single image layer with support for new kernel versions published after the initial release.

3.3. Installing Central services for RHACS on Red Hat OpenShift

Central is the resource that contains the RHACS application management interface and services. It handles data persistence, API interactions, and RHACS portal access. You can use the same Central instance to secure multiple OpenShift Container Platform or Kubernetes clusters.

You can install Central on your OpenShift Container Platform or Kubernetes cluster by using one of the following methods:

Install using the Operator
Install using Helm charts
Install using the roxctl CLI (do not use this method unless you have a specific installation need that requires using it)

3.3.1. Install Central using the Operator

3.3.1.1. Installing the Red Hat Advanced Cluster Security for Kubernetes Operator

Using the OperatorHub provided with OpenShift Container Platform is the easiest way to install Red Hat Advanced Cluster Security for Kubernetes.

Prerequisites

You have access to an OpenShift Container Platform cluster using an account with Operator installation permissions.
You must be using OpenShift Container Platform 4.6 or later.

Procedure

Navigate in the web console to the Operators → OperatorHub page.
If Red Hat Advanced Cluster Security for Kubernetes is not displayed, enter Advanced Cluster Security into the Filter by keyword box to find the Red Hat Advanced Cluster Security for Kubernetes Operator.
Select the Red Hat Advanced Cluster Security for Kubernetes Operator to view the details page.
Read the information about the Operator and click Install.
On the Install Operator page:
- Keep the default value for Installation mode as All namespaces on the cluster.
- Choose a specific namespace in which to install the Operator for the Installed namespace field. Red Hat recommends installing the Red Hat Advanced Cluster Security for Kubernetes Operator in the rhacs-operator namespace.
- Select automatic or manual updates for Update approval.
  If you choose automatic updates, when a new version of the Operator is available, Operator Lifecycle Manager (OLM) automatically upgrades the running instance of your Operator.
  If you choose manual updates, when a newer version of the Operator is available, OLM creates an update request. As a cluster administrator, you must manually approve the update request to update the Operator to the latest version.
  Important
  If you choose manual updates, you must update the RHACS Operator in all secured clusters when you update the RHACS Operator in the cluster where Central is installed. The secured clusters and the cluster where Central is installed must have the same version to ensure optimal functionality.
Click Install.

Verification

After the installation completes, navigate to Operators → Installed Operators to verify that the Red Hat Advanced Cluster Security for Kubernetes Operator is listed with the status of Succeeded.

Next Step

Install, configure, and deploy the Central custom resource.

3.3.1.2. Installing Central using the Operator method

The main component of Red Hat Advanced Cluster Security for Kubernetes is called Central. You can install Central on OpenShift Container Platform by using the Central custom resource. You deploy Central only once, and you can monitor multiple separate clusters by using the same Central installation.

Important

When you install Red Hat Advanced Cluster Security for Kubernetes for the first time, you must first install the Central custom resource because the SecuredCluster custom resource installation is dependent on certificates that Central generates.

Prerequisites

You must be using OpenShift Container Platform 4.6 or later.

Procedure

On the OpenShift Container Platform web console, navigate to the Operators → Installed Operators page.
Select the Red Hat Advanced Cluster Security for Kubernetes Operator from the list of installed Operators.
If you have installed the Operator in the recommended namespace, OpenShift Container Platform lists the project as rhacs-operator. Select Project: rhacs-operator → Create project.
Warning
- If you have installed the Operator in a different namespace, OpenShift Container Platform shows the name of that namespace rather than rhacs-operator.
- You must install the Red Hat Advanced Cluster Security for Kubernetes Central custom resource in its own project and not in the rhacs-operator and openshift-operator projects, or in the project in which you have installed the Red Hat Advanced Cluster Security for Kubernetes Operator.
Enter the new project name (for example, stackrox), and click Create. Red Hat recommends that you use stackrox as the project name.
Under the Provided APIs section, select Central. Click Create Central.
Enter a name for your Central custom resource and add any labels you want to apply. Otherwise, accept the default values for the available options.
Click Create.

Note

If you are using the cluster-wide proxy, Red Hat Advanced Cluster Security for Kubernetes uses that proxy configuration to connect to the external services.

Next Steps

Verify Central installation.
Optional: Configure Central options.
Generate an init bundle containing the cluster secrets that allows communication between the Central and SecuredCluster resources. You need to download this bundle, use it to generate resources on the clusters you want to secure, and securely store it.
Install secured cluster services on each cluster you want to monitor.

Additional resources

Central configuration options

3.3.1.3. Verifying Central installation using the Operator method

After Central finishes installing, log in to the RHACS portal to verify the successful installation of Central.

Procedure

On the OpenShift Container Platform web console, navigate to the Operators → Installed Operators page.
Select the Red Hat Advanced Cluster Security for Kubernetes Operator from the list of installed Operators.
Select the Central tab.
From the Centrals list, select stackrox-central-services to view its details.
To get the password for the admin user, you can either:
- Click the link under Admin Password Secret Reference.
- Use the Red Hat OpenShift CLI to enter the command listed under Admin Credentials Info:
```
$ oc -n stackrox get secret central-htpasswd -o go-template='{{index .data "password" | base64decode}}'
```
Find the link to the RHACS portal by using the Red Hat OpenShift CLI command:
```
$ oc -n stackrox get route central -o jsonpath="{.status.ingress[0].host}"
```
Alternatively, you can use the Red Hat Advanced Cluster Security for Kubernetes web console to find the link to the RHACS portal by performing the following commands:
1. Navigate to Networking → Routes.
2. Find the central Route and click on the RHACS portal link under the Location column.
Log in to the RHACS portal using the username admin and the password that you retrieved in a previous step. Until RHACS is completely configured (for example, you have the Central resource and at least one SecuredCluster resource installed and configured), no data is available in the dashboard. The SecuredCluster resource can be installed and configured on the same cluster as the Central resource. Clusters with the SecuredCluster resource are similar to managed clusters in Red Hat Advanced Cluster Management (RHACM).

Next Steps

Optional: Configure central settings.
Generate an init bundle containing the cluster secrets that allows communication between the Central and SecuredCluster resources. You need to download this bundle, use it to generate resources on the clusters you want to secure, and securely store it.
Install secured cluster services on each cluster you want to monitor.

3.3.2. Install Central using Helm charts

You can install Central using Helm charts without any customization, using the default values, or by using Helm charts with additional customizations of configuration parameters.

3.3.2.1. Install Central using Helm charts without customization

You can install RHACS on your cluster without any customizations. You must add the Helm chart repository and install the central-services Helm chart to install the centralized components of Central and Scanner.

3.3.2.1.1. Adding the Helm chart repository

Procedure

Add the RHACS charts repository.

$ helm repo add rhacs https://mirror.openshift.com/pub/rhacs/charts/

The Helm repository for Red Hat Advanced Cluster Security for Kubernetes includes Helm charts for installing different components, including:

Central services Helm chart (central-services) for installing the centralized components (Central and Scanner).
Note
You deploy centralized components only once and you can monitor multiple separate clusters by using the same installation.
Secured Cluster Services Helm chart (secured-cluster-services) for installing the per-cluster (Sensor and Admission controller) and per-node (Collector) components.
Note
Deploy the per-cluster components into each cluster that you want to monitor and deploy the per-node components in all nodes that you want to monitor.

Verification

Run the following command to verify the added chart repository:
```
$ helm search repo -l rhacs/
```

3.3.2.1.2. Installing the central-services Helm chart without customizations

Use the following instructions to install the central-services Helm chart to deploy the centralized components (Central and Scanner).

Prerequisites

You must have access to the Red Hat Container Registry. For information about downloading images from registry.redhat.io, see Red Hat Container Registry Authentication.

Procedure

Run the following command to install Central services and expose Central using a route:

$ helm install -n stackrox \
  --create-namespace stackrox-central-services rhacs/central-services \
  --set imagePullSecrets.username=<username> \
  --set imagePullSecrets.password=<password> \
  --set central.exposure.route.enabled=true

Or, run the following command to install Central services and expose Central using a load balancer:

$ helm install -n stackrox \
  --create-namespace stackrox-central-services rhacs/central-services \
  --set imagePullSecrets.username=<username> \
  --set imagePullSecrets.password=<password> \
  --set central.exposure.loadBalancer.enabled=true

Or, run the following command to install Central services and expose Central using port forward:

$ helm install -n stackrox \
  --create-namespace stackrox-central-services rhacs/central-services \
    --set imagePullSecrets.username=<username> \
  --set imagePullSecrets.password=<password>

Important

If you are installing Red Hat Advanced Cluster Security for Kubernetes in a cluster that requires a proxy to connect to external services, you must specify your proxy configuration by using the proxyConfig parameter. For example:
```
env:
  proxyConfig: |
    url: http://proxy.name:port
    username: username
    password: password
    excludes:
    - some.domain
```
If you already created one or more image pull secrets in the namespace in which you are installing, instead of using a username and password, you can use --set imagePullSecrets.useExisting="<pull-secret-1;pull-secret-2>".
Do not use image pull secrets:
- If you are pulling your images from quay.io/stackrox-io or a registry in a private network that does not require authentication. Use use --set imagePullSecrets.allowNone=true instead of specifying a username and password.
- If you already configured image pull secrets in the default service account in the namespace you are installing. Use --set imagePullSecrets.useFromDefaultServiceAccount=true instead of specifying a username and password.

The output of the installation command includes:

An automatically generated administrator password.
Instructions on storing all the configuration values.
Any warnings that Helm generates.

3.3.2.2. Install Central using Helm charts with customizations

You can install RHACS on your Red Hat OpenShift cluster with customizations by using Helm chart configuration parameters with the helm install and helm upgrade commands. You can specify these parameters by using the --set option or by creating YAML configuration files.

Create the following files for configuring the Helm chart for installing Red Hat Advanced Cluster Security for Kubernetes:

Public configuration file values-public.yaml: Use this file to save all non-sensitive configuration options.
Private configuration file values-private.yaml: Use this file to save all sensitive configuration options. Ensure that you store this file securely.

3.3.2.2.1. Private configuration file

This section lists the configurable parameters of the values-private.yaml file. There are no default values for these parameters.

3.3.2.2.1.1. Image pull secrets

The credentials that are required for pulling images from the registry depend on the following factors:

If you are using a custom registry, you must specify these parameters:
- imagePullSecrets.username
- imagePullSecrets.password
- image.registry
If you do not use a username and password to log in to the custom registry, you must specify one of the following parameters:
- imagePullSecrets.allowNone
- imagePullSecrets.useExisting
- imagePullSecrets.useFromDefaultServiceAccount

Parameter	Description
`imagePullSecrets.username`	The username of the account that is used to log in to the registry.
`imagePullSecrets.password`	The password of the account that is used to log in to the registry.
`imagePullSecrets.allowNone`	Use `true` if you are using a custom registry and it allows pulling images without credentials.
`imagePullSecrets.useExisting`	A comma-separated list of secrets as values. For example, `secret1, secret2, secretN`. Use this option if you have already created pre-existing image pull secrets with the given name in the target namespace.
`imagePullSecrets.useFromDefaultServiceAccount`	Use `true` if you have already configured the default service account in the target namespace with sufficiently scoped image pull secrets.

3.3.2.2.1.2. Proxy configuration

If you are installing Red Hat Advanced Cluster Security for Kubernetes in a cluster that requires a proxy to connect to external services, you must specify your proxy configuration by using the proxyConfig parameter. For example:

env:
  proxyConfig: |
    url: http://proxy.name:port
    username: username
    password: password
    excludes:
    - some.domain

Parameter	Description
`env.proxyConfig`	Your proxy configuration.

3.3.2.2.1.3. Central

Configurable parameters for Central.

For a new installation, you can skip the following parameters:

central.jwtSigner.key
central.serviceTLS.cert
central.serviceTLS.key
central.adminPassword.value
central.adminPassword.htpasswd
When you do not specify values for these parameters the Helm chart autogenerates values for them.
If you want to modify these values you can use the helm upgrade command and specify the values using the --set option.

Important

For setting the administrator password, you can only use either central.adminPassword.value or central.adminPassword.htpasswd, but not both.

Parameter	Description
`central.jwtSigner.key`	A private key which Red Hat Advanced Cluster Security for Kubernetes should use for signing JSON web tokens (JWTs) for authentication.
`central.serviceTLS.cert`	An internal certificate that the Central service should use for deploying Central.
`central.serviceTLS.key`	The private key of the internal certificate that the Central service should use.
`central.defaultTLS.cert`	The user-facing certificate that Central should use. Red Hat Advanced Cluster Security for Kubernetes uses this certificate for RHACS portal. For a new installation, you must provide a certificate, otherwise, Red Hat Advanced Cluster Security for Kubernetes installs Central by using a self-signed certificate. If you are upgrading, Red Hat Advanced Cluster Security for Kubernetes uses the existing certificate and its key.
`central.defaultTLS.key`	The private key of the user-facing certificate that Central should use. For a new installation, you must provide the private key, otherwise, Red Hat Advanced Cluster Security for Kubernetes installs Central by using a self-signed certificate. If you are upgrading, Red Hat Advanced Cluster Security for Kubernetes uses the existing certificate and its key.
`central.adminPassword.value`	Administrator password for logging into Red Hat Advanced Cluster Security for Kubernetes.
`central.adminPassword.htpasswd`	Administrator password for logging into Red Hat Advanced Cluster Security for Kubernetes. This password is stored in hashed format using bcrypt.

Note

If you are using central.adminPassword.htpasswd parameter, you must use a bcrypt encoded password hash. You can run the command htpasswd -nB admin to generate a password hash. For example,

htpasswd: |
  admin:<bcrypt-hash>

3.3.2.2.1.4. Scanner

Configurable parameters for Scanner.

For a new installation, you can skip the following parameters and the Helm chart autogenerates values for them. Otherwise, if you are upgrading to a new version, specify the values for the following parameters:

scanner.dbPassword.value
scanner.serviceTLS.cert
scanner.serviceTLS.key
scanner.dbServiceTLS.cert
scanner.dbServiceTLS.key

Parameter	Description
`scanner.dbPassword.value`	The password to use for authentication with Scanner database. Do not modify this parameter because Red Hat Advanced Cluster Security for Kubernetes automatically creates and uses its value internally.
`scanner.serviceTLS.cert`	An internal certificate that the Scanner service should use for deploying Scanner.
`scanner.serviceTLS.key`	The private key of the internal certificate that the Scanner service should use.
`scanner.dbServiceTLS.cert`	An internal certificate that the Scanner-db service should use for deploying Scanner database.
`scanner.dbServiceTLS.key`	The private key of the internal certificate that the Scanner-db service should use.

3.3.2.2.2. Public configuration file

This section lists the configurable parameters of the values-public.yaml file.

3.3.2.2.2.1. Image pull secrets

Image pull secrets are the credentials required for pulling images from your registry.

Parameter	Description
`imagePullSecrets.allowNone`	Use `true` if you are using a custom registry and it allows pulling images without credentials.
`imagePullSecrets.useExisting`	A comma-seprated list of secrets as values. For example, `secret1, secret2`. Use this option if you have already created pre-existing image pull secrets with the given name in the target namespace.
`imagePullSecrets.useFromDefaultServiceAccount`	Use `true` if you have already configured the default service account in the target namespace with sufficiently scoped image pull secrets.

3.3.2.2.2.2. Image

Image declares the configuration to set up the main registry, which the Helm chart uses to resolve images for the central.image, scanner.image, and scanner.dbImage parameters.

Parameter	Description
`image.registry`	Address of your image registry. Either use a hostname, such as `registry.redhat.io`, or a remote registry hostname, such as `us.gcr.io/stackrox-mirror`.

3.3.2.2.2.3. Environment variables

Red Hat Advanced Cluster Security for Kubernetes automatically detects your cluster environment and sets values for env.openshift, env.istio, and env.platform. Only set these values to override the automatic cluster environment detection.

Parameter	Description
`env.openshift`	Use `true` for installing on an OpenShift Container Platform cluster and overriding automatic cluster environment detection.
`env.istio`	Use `true` for installing on an Istio enabled cluster and overriding automatic cluster environment detection.
`env.platform`	The platform on which you are installing Red Hat Advanced Cluster Security for Kubernetes. Set its value to `default` or `gke` to specify cluster platform and override automatic cluster environment detection.
`env.offlineMode`	Use `true` to use Red Hat Advanced Cluster Security for Kubernetes in offline mode.

3.3.2.2.2.4. Additional trusted certificate authorities

The Red Hat Advanced Cluster Security for Kubernetes automatically references the system root certificates to trust. When Central or Scanner must reach out to services that use certificates issued by an authority in your organization or a globally trusted partner organization, you can add trust for these services by specifying the root certificate authority to trust by using the following parameter:

Parameter	Description
`additionalCAs.<certificate_name>`	Specify the PEM encoded certificate of the root certificate authority to trust.

3.3.2.2.2.5. Central

Configurable parameters for Central.

You must specify a persistent storage option as either hostPath or persistentVolumeClaim.
For exposing Central deployment for external access. You must specify one parameter, either central.exposure.loadBalancer, central.exposure.nodePort, or central.exposure.route. When you do not specify any value for these parameters, you must manually expose Central or access it by using port-forwarding.

Parameter	Description
`central.disableTelemetry`	Use `true` to disable online telemetry data collection.
`central.endpointsConfig`	The endpoint configuration options for Central.
`central.nodeSelector`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Central. This parameter is mainly used for infrastructure nodes.
`central.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Central. This parameter is mainly used for infrastructure nodes.
`central.exposeMonitoring`	Specify `true` to expose Prometheus metrics endpoint for Central on port number `9090`.
`central.image.registry`	A custom registry that overrides the global `image.registry` parameter for the Central image.
`central.image.name`	The custom image name that overrides the default Central image name (`main`).
`central.image.tag`	The custom image tag that overrides the default tag for Central image. If you specify you own image tag during a new installation, you must manually increment this tag when you to upgrade to a new version by running the `helm upgrade` command. If you mirror Central images in your own registry, do not modify the original image tags.
`central.image.fullRef`	Full reference including registry address, image name, and image tag for the Central image. Setting a value for this parameter overrides the `central.image.registry`, `central.image.name`, and `central.image.tag` parameters.
`central.resources.requests.memory`	The memory request for Central to override the default value.
`central.resources.requests.cpu`	The CPU request for Central to override the default value.
`central.resources.limits.memory`	The memory limit for Central to override the default value.
`central.resources.limits.cpu`	The CPU limit for Central to override the default value.
`central.persistence.hostPath`	The path on the node where Red Hat Advanced Cluster Security for Kubernetes should create a database volume. Red Hat does not recommend using this option.
`central.persistence.persistentVolumeClaim.claimName`	The name of the persistent volume claim (PVC) you are using.
`central.persistence.persistentVolumeClaim.createClaim`	Use `true` to create a new persistent volume claim, or `false` to use an existing claim.
`central.persistence.persistentVolumeClaim.size`	The size (in GiB) of the persistent volume managed by the specified claim.
`central.exposure.loadBalancer.enabled`	Use `true` to expose Central by using a load balancer.
`central.exposure.loadBalancer.port`	The port number on which to expose Central. The default port number is 443.
`central.exposure.nodePort.enabled`	Use `true` to expose Central by using the node port service.
`central.exposure.nodePort.port`	The port number on which to expose Central. When you skip this parameter, OpenShift Container Platform automatically assigns a port number. Red Hat recommends that you do not specify a port number if you are exposing Red Hat Advanced Cluster Security for Kubernetes by using a node port.
`central.exposure.route.enabled`	Use `true` to expose Central by using a route. This parameter is only available for OpenShift Container Platform clusters.

3.3.2.2.2.6. Scanner

Configurable parameters for Scanner.

Parameter	Description
`scanner.disable`	Use `true` to install Red Hat Advanced Cluster Security for Kubernetes without Scanner. When you use it with the `helm upgrade` command, Helm removes existing Scanner deployment.
`scanner.exposeMonitoring`	Specify `true` to expose Prometheus metrics endpoint for Scanner on port number `9090`.
`scanner.replicas`	The number of replicas to create for the Scanner deployment. When you use it with the `scanner.autoscaling` parameter, this value sets the initial number of replicas.
`scanner.logLevel`	Configure the log level for Scanner. Red Hat recommends that you not change the log level’s default value (`INFO`).
`scanner.nodeSelector`	Specify a node selector label as `label-key: label-value` to force Scanner to only schedule on nodes with the specified label.
`scanner.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner. This parameter is mainly used for infrastructure nodes.
`scanner.autoscaling.disable`	Use `true` to disable autoscaling for Scanner deployment. When you disable autoscaling, the `minReplicas` and `maxReplicas` parameters do not have any effect.
`scanner.autoscaling.minReplicas`	The minimum number of replicas for autoscaling.
`scanner.autoscaling.maxReplicas`	The maximum number of replicas for autoscaling.
`scanner.resources.requests.memory`	The memory request for Scanner to override the default value.
`scanner.resources.requests.cpu`	The CPU request for Scanner to override the default value.
`scanner.resources.limits.memory`	The memory limit for Scanner to override the default value.
`scanner.resources.limits.cpu`	The CPU limit for Scanner to override the default value.
`scanner.dbResources.requests.memory`	The memory request for Scanner database deployment to override the default values.
`scanner.dbResources.requests.cpu`	The CPU request for Scanner database deployment to override the default values.
`scanner.dbResources.limits.memory`	The memory limit for Scanner database deployment to override the default values.
`scanner.dbResources.limits.cpu`	The CPU limit for Scanner database deployment to override the default values.
`scanner.image.registry`	A custom registry for the Scanner image.
`scanner.image.name`	The custom image name that overrides the default Scanner image name (`scanner`).
`scanner.dbImage.registry`	A custom registry for the Scanner DB image.
`scanner.dbImage.name`	The custom image name that overrides the default Scanner DB image name (`scanner-db`).
`scanner.dbNodeSelector`	Specify a node selector label as `label-key: label-value` to force Scanner DB to only schedule on nodes with the specified label.
`scanner.dbTolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner DB. This parameter is mainly used for infrastructure nodes.

3.3.2.2.2.7. Customization

Use these parameters to specify additional attributes for all objects that Red Hat Advanced Cluster Security for Kubernetes creates.

Parameter	Description
`customize.labels`	A custom label to attach to all objects.
`customize.annotations`	A custom annotation to attach to all objects.
`customize.podLabels`	A custom label to attach to all deployments.
`customize.podAnnotations`	A custom annotation to attach to all deployments.
`customize.envVars`	A custom environment variable for all containers in all objects.
`customize.central.labels`	A custom label to attach to all objects that Central creates.
`customize.central.annotations`	A custom annotation to attach to all objects that Central creates.
`customize.central.podLabels`	A custom label to attach to all Central deployments.
`customize.central.podAnnotations`	A custom annotation to attach to all Central deployments.
`customize.central.envVars`	A custom environment variable for all Central containers.
`customize.scanner.labels`	A custom label to attach to all objects that Scanner creates.
`customize.scanner.annotations`	A custom annotation to attach to all objects that Scanner creates.
`customize.scanner.podLabels`	A custom label to attach to all Scanner deployments.
`customize.scanner.podAnnotations`	A custom annotation to attach to all Scanner deployments.
`customize.scanner.envVars`	A custom environment variable for all Scanner containers.
`customize.scanner-db.labels`	A custom label to attach to all objects that Scanner DB creates.
`customize.scanner-db.annotations`	A custom annotation to attach to all objects that Scanner DB creates.
`customize.scanner-db.podLabels`	A custom label to attach to all Scanner DB deployments.
`customize.scanner-db.podAnnotations`	A custom annotation to attach to all Scanner DB deployments.
`customize.scanner-db.envVars`	A custom environment variable for all Scanner DB containers.

You can also use:

the customize.other.service/*.labels and the customize.other.service/*.annotations parameters, to specify labels and annotations for all objects.
or, provide a specific service name, for example, customize.other.service/central-loadbalancer.labels and customize.other.service/central-loadbalancer.annotations as parameters and set their value.

3.3.2.2.2.8. Advanced customization

Important

The parameters specified in this section are for information only. Red Hat does not support Red Hat Advanced Cluster Security for Kubernetes instances with modified namespace and release names.

Parameter	Description
`allowNonstandardNamespace`	Use `true` to deploy Red Hat Advanced Cluster Security for Kubernetes into a namespace other than the default namespace `stackrox`.
`allowNonstandardReleaseName`	Use `true` to deploy Red Hat Advanced Cluster Security for Kubernetes with a release name other than the default `stackrox-central-services`.

3.3.2.2.3. Installing the central-services Helm chart

After you configure the values-public.yaml and values-private.yaml files, install the central-services Helm chart to deploy the centralized components (Central and Scanner).

Procedure

Run the following command:

$ helm install -n stackrox --create-namespace \
  stackrox-central-services rhacs/central-services \
  -f <path_to_values_public.yaml> -f <path_to_values_private.yaml> 1

1: Use the -f option to specify the paths for your YAML configuration files.

3.3.2.3. Changing configuration options after deploying the central-services Helm chart

You can make changes to any configuration options after you have deployed the central-services Helm chart.

Procedure

Update the values-public.yaml and values-private.yaml configuration files with new values.
Run the helm upgrade command and specify the configuration files using the -f option:
```
$ helm upgrade -n stackrox \
  stackrox-central-services rhacs/central-services \
  -f <path_to_values_public.yaml> \
  -f <path_to_values_private.yaml>
```
Note
You can also specify configuration values using the --set or --set-file parameters. However, these options are not saved, and it requires you to manually specify all the options again whenever you make changes.

3.3.3. Install Central using the roxctl CLI

Warning

For production environments, Red Hat recommends using the Operator or Helm charts to install RHACS. Do not use the roxctl install method unless you have a specific installation need that requires using this method.

3.3.3.1. Installing the roxctl CLI

To install Red Hat Advanced Cluster Security for Kubernetes you must install the roxctl CLI by downloading the binary. You can install roxctl on Linux, Windows, or macOS.

3.3.3.1.1. Installing the roxctl CLI on Linux

You can install the roxctl CLI binary on Linux by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Linux/roxctl

Make the roxctl binary executable:
```
$ chmod +x roxctl
```
Place the roxctl binary in a directory that is on your PATH:
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

3.3.3.1.2. Installing the roxctl CLI on macOS

You can install the roxctl CLI binary on macOS by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Darwin/roxctl

Remove all extended attributes from the binary:
```
$ xattr -c roxctl
```
Make the roxctl binary executable:
```
$ chmod +x roxctl
```
Place the roxctl binary in a directory that is on your PATH:
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

3.3.3.1.3. Installing the roxctl CLI on Windows

You can install the roxctl CLI binary on Windows by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Windows/roxctl.exe

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

3.3.3.2. Using the interactive installer

Use the interactive installer to generate the required secrets, deployment configurations, and deployment scripts for your environment.

Procedure

Run the interactive install command:
```
$ roxctl central generate interactive
```
Important
Installing Red Hat Advanced Cluster Security for Kubernetes using roxctl CLI creates PodSecurityPolicy (PSP) objects by default for backward compatibility. If you install RHACS on Kubernetes versions 1.25 and newer or OpenShift Container Platform version 4.12 and newer, you must disable the PSP object creation. To do this, specify --enable-pod-security-policies option as false for the roxctl central generate and roxctl sensor generate commands.

Press Enter to accept the default value for a prompt or enter custom values as required.

Enter path to the backup bundle from which to restore keys and certificates (optional):
Enter PEM cert bundle file (optional): 1
Enter administrator password (default: autogenerated):
Enter orchestrator (k8s, openshift): openshift
Enter the directory to output the deployment bundle to (default: "central-bundle"):
Enter the OpenShift major version (3 or 4) to deploy on (default: "0"): 4
Enter Istio version when deploying into an Istio-enabled cluster (leave empty when not running Istio) (optional):
Enter the method of exposing Central (route, lb, np, none) (default: "none"): route 2
Enter main image to use (default: "stackrox.io/main:3.0.61.1"):
Enter whether to run StackRox in offline mode, which avoids reaching out to the Internet (default: "false"):
Enter whether to enable telemetry (default: "true"):
Enter the deployment tool to use (kubectl, helm, helm-values) (default: "kubectl"):
Enter Scanner DB image to use (default: "stackrox.io/scanner-db:2.15.2"):
Enter Scanner image to use (default: "stackrox.io/scanner:2.15.2"):
Enter Central volume type (hostpath, pvc): pvc 3
Enter external volume name (default: "stackrox-db"):
Enter external volume size in Gi (default: "100"):
Enter storage class name (optional if you have a default StorageClass configured):

1: If you want to add a custom TLS certificate, provide the file path for the PEM-encoded certificate. When you specify a custom certificate the interactive installer also prompts you to provide a PEM private key for the custom certificate you are using.
2: To use the RHACS portal, you must expose Central by using a route, a load balancer or a node port.
3: If you plan to install Red Hat Advanced Cluster Security for Kubernetes on OpenShift Container Platform with a hostPath volume, you must modify the SELinux policy.

Warning

On OpenShift Container Platform, for using a hostPath volume, you must modify the SELinux policy to allow access to the directory, which the host and the container share. It is because SELinux blocks directory sharing by default. To modify the SELinux policy, run the following command:

$ sudo chcon -Rt svirt_sandbox_file_t <full_volume_path>

However, Red Hat does not recommend modifying the SELinux policy, instead use PVC when installing on OpenShift Container Platform.

On completion, the installer creates a folder named central-bundle, which contains the necessary YAML manifests and scripts to deploy Central. In addition, it shows on-screen instructions for the scripts you need to run to deploy additional trusted certificate authorities, Central and Scanner, and the authentication instructions for logging into the RHACS portal along with the autogenerated password if you did not provide one when answering the prompts.

3.3.3.3. Running the Central installation scripts

After you run the interactive installer, you can run the setup.sh script to install Central.

Procedure

Run the setup.sh script to configure image registry access:
```
$ ./central-bundle/central/scripts/setup.sh
```

Create the necessary resources:

$ oc create -R -f central-bundle/central

Check the deployment progress:
```
$ oc get pod -n stackrox -w
```

After Central is running, find the RHACS portal IP address and open it in your browser. Depending on the exposure method you selected when answering the prompts, use one of the following methods to get the IP address.

Exposure method	Command	Address	Example
Route	`oc -n stackrox get route central`	The address under the `HOST/PORT` column in the output	`https://central-stackrox.example.route`
Node Port	`oc get node -owide && oc -n stackrox get svc central-loadbalancer`	IP or hostname of any node, on the port shown for the service	`https://198.51.100.0:31489`
Load Balancer	`oc -n stackrox get svc central-loadbalancer`	EXTERNAL-IP or hostname shown for the service, on port 443	`https://192.0.2.0`
None	`central-bundle/central/scripts/port-forward.sh 8443`	`https://localhost:8443`	`https://localhost:8443`

Note

If you have selected autogenerated password during the interactive install, you can run the following command to see it for logging into Central:

$ cat central-bundle/password

3.4. Optional - Configuring Central configuration options for RHACS using the Operator

This topic provides information about optional configuration options that you can configure using the Operator.

3.4.1. Central configuration options using the Operator

When you create a Central instance, the Operator lists the following configuration options for the Central custom resource.

3.4.1.1. Central settings

Parameter	Description
`central.adminPasswordSecret`	Specify a secret that contains the administrator password in the `password` data item. If omitted, the operator autogenerates a password and stores it in the `password` item in the `central-htpasswd` secret.
`central.defaultTLSSecret`	By default, Central only serves an internal TLS certificate, which means that you need to handle TLS termination at the ingress or load balancer level. If you want to terminate TLS in Central and serve a custom server certificate, you can specify a secret containing the certificate and private key.
`central.adminPasswordGenerationDisabled`	Set this parameter to `true` to disable the automatic administrator password generation. Use this only after you perform the first-time setup of alternative authentication methods. Do not use this for initial installation. Otherwise, you must reinstall the custom resource to log back in.
`central.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Central. This parameter is mainly used for infrastructure nodes.
`central.exposure.loadBalancer.enabled`	Set this to `true` to expose Central through a load balancer.
`central.exposure.loadBalancer.port`	Use this parameter to specify a custom port for your load balancer.
`central.exposure.loadBalancer.ip`	Use this parameter to specify a static IP address reserved for your load balancer.
`central.exposure.route.enabled`	Set this to `true` to expose Central through an OpenShift route. The default value is `false`.
`central.exposure.route.host`	Specify a custom hostname to use for Central’s route. Leave this unset to accept the default value that OpenShift Container Platform provides.
`central.exposure.nodeport.enabled`	Set this to `true` to expose Central through a node port. The default value is `false`.
`central.exposure.nodeport.port`	Use this to specify an explicit node port.
`central.monitoring.exposeEndpoint`	Use `Enabled` to enable monitoring for Central. When you enable monitoring, RHACS creates a new monitoring service on port number `9090`. The default value is `Disabled`.
`central.nodeSelector`	If you want this component to only run on specific nodes, you can configure a node selector by using this parameter.
`central.persistence.hostPath.path`	Specify a host path to store persistent data in a directory on the host. Red Hat does not recommend using this. If you need to use host path, you must use it with a node selector.
`central.persistence.persistentVolumeClaim.claimName`	The name of the PVC to manage persistent data. If no PVC with the given name exists, it will be created. The default value is `stackrox-db` if not set. To prevent data losses the PVC is not removed automatically with Central`s deletion.
`central.persistence.persistentVolumeClaim.size`	The size of the persistent volume when created through the claim. This is automatically generated by default.
`central.persistence.persistentVolumeClaim.storageClassName`	The name of the storage class to use for the PVC. If your cluster is not configured with a default storage class, you must provide a value for this parameter.
`central.resources.limits`	Use this parameter to override the default resource limits for the Central.
`central.resources.requests`	Use this parameter to override the default resource requests for the Central.
`central.imagePullSecrets`	Use this parameter to specify the image pull secrets for the Central image.

3.4.1.2. Scanner settings

Parameter	Description
`scanner.analyzer.nodeSelector`	If you want this scanner to only run on specific nodes, you can configure a node selector by using this parameter.
`scanner.analyzer.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner. This parameter is mainly used for infrastructure nodes.
`scanner.analyzer.resources.limits`	Use this parameter to override the default resource limits for the scanner.
`scanner.analyzer.resources.requests`	Use this parameter to override the default resource requests for the scanner.
`scanner.analyzer.scaling.autoScaling`	When enabled, the number of analyzer replicas is managed dynamically based on the load, within the limits specified.
`scanner.analyzer.scaling.maxReplicas`	Specifies the maximum replicas to be used the analyzer autoscaling configuration
`scanner.analyzer.scaling.minReplicas`	Specifies the minimum replicas to be used the analyzer autoscaling configuration
`scanner.analyzer.scaling.replicas`	When autoscaling is disabled, the number of replicas will always be configured to match this value.
`scanner.db.nodeSelector`	If you want this component to only run on specific nodes, you can configure a node selector by using this parameter.
`scanner.db.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner DB. This parameter is mainly used for infrastructure nodes.
`scanner.db.resources.limits`	Use this parameter to override the default resource limits for the scanner.
`scanner.db.resources.requests`	Use this parameter to override the default resource requests for the scanner.
`scanner.monitoring.exposeEndpoint`	Use `Enabled` to enable monitoring for Scanner. When you enable monitoring, RHACS creates a new monitoring service on port number `9090`. The default value is `Disabled`.
`scanner.scannerComponent`	If you do not want to deploy Scanner, you can disable it by using this parameter. If you disable Scanner, all other settings in this section have no effect. Red Hat does not recommend disabling Red Hat Advanced Cluster Security for Kubernetes Scanner.

3.4.1.3. General and miscellaneous settings

Parameter	Description
`tls.additionalCAs`	Additional Trusted CA certificates for the secured cluster to trust. These certificates are typically used when integrating with services using a private certificate authority.
`misc.createSCCs`	Specify `true` to create `SecurityContextConstraints` (SCCs) for Central. Setting to `true` might cause issues in some environments.
`customize.annotations`	Allows specifying custom annotations for the Central deployment.
`customize.envVars`	Advanced settings to configure environment variables.
`egress.connectivityPolicy`	Configures whether RHACS should run in online or offline mode. In offline mode, automatic updates of vulnerability definitions and kernel modules are disabled.

3.5. Generating and applying an init bundle for RHACS on Red Hat OpenShift

Before you install the SecuredCluster resource on a cluster, you must create an init bundle. The cluster that has SecuredCluster installed and configured then uses this bundle to authenticate with Central. You can create an init bundle by using either the RHACS portal or the roxctl CLI. You then apply the init bundle by using it to create resources.

To configure an init bundle for ACSCS, see the following resources:

Note

You must have the Admin user role to create an init bundle.

3.5.1. Generating an init bundle

3.5.1.1. Generating an init bundle by using the RHACS portal

You can create an init bundle containing secrets by using the RHACS portal.

Note

You must have the Admin user role to create an init bundle.

Procedure

Find the address of the RHACS portal based on your exposure method:
1. For a route:
```
$ oc get route central -n stackrox
```
2. For a load balancer:
```
$ oc get service central-loadbalancer -n stackrox
```
3. For port forward:
  1. Run the following command:
    $ oc port-forward svc/central 18443:443 -n stackrox
  2. Navigate to https://localhost:18443/.
On the RHACS portal, navigate to Platform Configuration → Integrations.
Navigate to the Authentication Tokens section and click on Cluster Init Bundle.
Click Generate bundle.
Enter a name for the cluster init bundle and click Generate.
1. If you are installing using Helm charts, click Download Helm Values File to download the generated bundle.
2. If you are installing using the Operator, click Download Kubernetes Secret File to download the generated bundle.

Important

Store this bundle securely because it contains secrets. You can use the same bundle to create multiple secured clusters.

Next steps

Apply the init bundle by creating a resource on the secured cluster.
Install secured cluster services on each cluster.

3.5.1.2. Generating an init bundle by using the roxctl CLI

You can create an init bundle with secrets by using the roxctl CLI.

Note

You must have the Admin user role to create init bundles.

Prerequisites

You have configured the ROX_API_TOKEN and the ROX_CENTRAL_ADDRESS environment variables.

Set the ROX_API_TOKEN and the ROX_CENTRAL_ADDRESS environment variables:

$ export ROX_API_TOKEN=<api_token>

$ export ROX_CENTRAL_ADDRESS=<address>:<port_number>

Procedure

Run the following command to generate a cluster init bundle containing secrets:

For Helm installations:

$ roxctl -e "$ROX_CENTRAL_ADDRESS" \
  central init-bundles generate <cluster_init_bundle_name> \
  --output cluster_init_bundle.yaml

For Operator installations:

$ roxctl -e "$ROX_CENTRAL_ADDRESS" \
  central init-bundles generate <cluster_init_bundle_name> \
  --output-secrets cluster_init_bundle.yaml

Important

Ensure that you store this bundle securely because it contains secrets. You can use the same bundle to set up multiple secured clusters.

Next Step

Use the Red Hat OpenShift CLI to create resources using the init bundle.

3.5.2. Creating resources by using the init bundle

Before you install secured clusters, you must use the init bundle to create the required resources on the cluster that will allow the services on the secured clusters to communicate with Central.

Note

If you are installing by using Helm charts, do not perform this step.

Prerequisites

You must have generated an init bundle containing secrets.

Procedure

Using the Red Hat OpenShift CLI, run the following command to create the resources:
```
$ oc create -f <init_bundle>.yaml \ 1
  -n <stackrox> 2
```
1
Specify the file name of the init bundle containing the secrets.
2
Specify the name of the project where Central services are installed.

Next Step

Install RHACS secured cluster services in all clusters that you want to monitor.

3.6. Installing secured cluster services for RHACS on Red Hat OpenShift

This section describes the installation procedure for installing Red Hat Advanced Cluster Security for Kubernetes on your secured clusters.

You can install RHACS on your secured clusters by using one of the following methods:

Install using the Operator
Install using Helm charts
Install using the roxctl CLI (do not use this method unless you have a specific installation need that requires using it)

3.6.1. Installing RHACS on secured clusters by using the Operator

3.6.1.1. Installing secured cluster services

You can install secured cluster services on your clusters by using the SecuredCluster custom resource. You must install the secured cluster services on every cluster in your environment that you want to monitor.

Caution

When you install secured cluster services, Collector is also installed. To install Collector on systems that have Unified Extensible Firmware Interface (UEFI) and that have Secure Boot enabled, you must use eBPF probes because kernel modules are unsigned, and the UEFI firmware cannot load unsigned packages. Collector identifies Secure Boot status at the start and switches to eBPF probes if required.

Prerequisites

If you are using OpenShift Container Platform, you must install version 4.6 or later.
You have installed the RHACS Operator.
You have generated an init bundle and applied it to the cluster.

Procedure

On the OpenShift Container Platform web console, navigate to the Operators → Installed Operators page.
Click the RHACS Operator.
Click Secured Cluster from the central navigation menu in the Operator details page.
Click Create SecuredCluster.
Select one of the following options in the Configure via field:
- Form view: Use this option if you want to use the on-screen fields to configure the secured cluster and do not need to change any other fields.
- YAML view: Use this view to set up the secured cluster using the YAML file. The YAML file is displayed in the window and you can edit fields in it. If you select this option, when you are finished editing the file, click Create.
If you are using Form view, enter the new project name by accepting or editing the default name. The default value is stackrox-secured-cluster-services.
Optional: Add any labels for the cluster.
Enter a unique name for your SecuredCluster custom resource.
For Central Endpoint, enter the address and port number of your Central instance. For example, if Central is available at https://central.example.com, then specify the central endpoint as central.example.com:443. The default value of central.stackrox.svc:443 only works when you install secured cluster services and Central in the same cluster. Do not use the default value when you are configuring multiple clusters. Instead, use the hostname when configuring the Central Endpoint value for each cluster.
- Only if you are installing secured cluster services and Central in the same cluster, use central.stackrox.svc:443.
Accept the default values or configure custom values if needed. For example, you may need to configure TLS if you are using custom certificates or untrusted CAs.
Click Create.

Next step

Optional: Configure additional secured cluster settings.
Verify installation.

3.6.2. Installing RHACS on secured clusters by using Helm charts

You can install RHACS on secured clusters by using Helm charts with no customization, using the default values, or with customizations of configuration parameters.

3.6.2.1. Installing RHACS on secured clusters by using Helm charts without customizations

3.6.2.1.1. Adding the Helm chart repository

Procedure

Add the RHACS charts repository.

$ helm repo add rhacs https://mirror.openshift.com/pub/rhacs/charts/

The Helm repository for Red Hat Advanced Cluster Security for Kubernetes includes Helm charts for installing different components, including:

Central services Helm chart (central-services) for installing the centralized components (Central and Scanner).
Note
You deploy centralized components only once and you can monitor multiple separate clusters by using the same installation.
Secured Cluster Services Helm chart (secured-cluster-services) for installing the per-cluster (Sensor and Admission controller) and per-node (Collector) components.
Note
Deploy the per-cluster components into each cluster that you want to monitor and deploy the per-node components in all nodes that you want to monitor.

Verification

Run the following command to verify the added chart repository:
```
$ helm search repo -l rhacs/
```

3.6.2.1.2. Installing the secured-cluster-services Helm chart without customization

Use the following instructions to install the secured-cluster-services Helm chart to deploy the per-cluster and per-node components (Sensor, Admission controller, and Collector).

Caution

Prerequisites

You must have generated RHACS init bundle for your cluster.
You must have the address and the port number that you are exposing the Central service on.

Procedure

Run the following command on your Kubernetes based clusters:

$ helm install -n stackrox --create-namespace \
    stackrox-secured-cluster-services rhacs/secured-cluster-services \
    -f <path_to_cluster_init_bundle.yaml> \ 1
    --set clusterName=<name_of_the_secured_cluster> \
    --set centralEndpoint=<endpoint_of_central_service> 2

1: Use the -f option to specify the path for the init bundle.
2: Specify the address and port number for Central. For example, acs.domain.com:443.

Run the following command on OpenShift Container Platform clusters:

$ helm install -n stackrox --create-namespace \
    stackrox-secured-cluster-services rhacs/secured-cluster-services \
    -f <path_to_cluster_init_bundle.yaml> \ 1
    --set clusterName=<name_of_the_secured_cluster> \
    --set centralEndpoint=<endpoint_of_central_service> 2
    --set scanner.disable=false

1: Use the -f option to specify the path for the init bundle.
2: Specify the address and port number for Central. For example, acs.domain.com:443.

Additional resources

Generating and applying an init bundle for RHACS on Red Hat OpenShift

3.6.2.2. Configuring the secured-cluster-services Helm chart with customizations

This section describes Helm chart configuration parameters that you can use with the helm install and helm upgrade commands. You can specify these parameters by using the --set option or by creating YAML configuration files.

Create the following files for configuring the Helm chart for installing Red Hat Advanced Cluster Security for Kubernetes:

Public configuration file values-public.yaml: Use this file to save all non-sensitive configuration options.
Private configuration file values-private.yaml: Use this file to save all sensitive configuration options. Ensure that you store this file securely.

Important

While using the secured-cluster-services Helm chart, do not modify the values.yaml file that is part of the chart.

3.6.2.2.1. Configuration parameters

Parameter	Description
`clusterName`	Name of your cluster.
`centralEndpoint`	Address, including port number, of the Central endpoint. If you are using a non-gRPC capable load balancer, use the WebSocket protocol by prefixing the endpoint address with `wss://`. When configuring multiple clusters, use the hostname for the address (for example, `central.example.com:443`).
`sensor.endpoint`	Address of the Sensor endpoint including port number.
`sensor.imagePullPolicy`	Image pull policy for the Sensor container.
`sensor.serviceTLS.cert`	The internal service-to-service TLS certificate that Sensor uses.
`sensor.serviceTLS.key`	The internal service-to-service TLS certificate key that Sensor uses.
`sensor.resources.requests.memory`	The memory request for the Sensor container. Use this parameter to override the default value.
`sensor.resources.requests.cpu`	The CPU request for the Sensor container. Use this parameter to override the default value.
`sensor.resources.limits.memory`	The memory limit for the Sensor container. Use this parameter to override the default value.
`sensor.resources.limits.cpu`	The CPU limit for the Sensor container. Use this parameter to override the default value.
`sensor.nodeSelector`	Specify a node selector label as `label-key: label-value` to force Sensor to only schedule on nodes with the specified label.
`sensor.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Sensor. This parameter is mainly used for infrastructure nodes.
`image.main.name`	The name of the `main` image.
`image.collector.name`	The name of the Collector image.
`image.main.registry`	Address of the registry you are using for the main image.
`image.collector.registry`	Address of the registry you are using for the Collector image.
`image.main.pullPolicy`	Image pull policy for `main` images.
`image.collector.pullPolicy`	Image pull policy for the Collector images.
`image.main.tag`	Tag of `main` image to use.
`image.collector.tag`	Tag of `collector` image to use.
`collector.collectionMethod`	Either `EBPF`, `KERNEL_MODULE`, or `NO_COLLECTION`.
`collector.imagePullPolicy`	Image pull policy for the Collector container.
`collector.complianceImagePullPolicy`	Image pull policy for the Compliance container.
`collector.disableTaintTolerations`	If you specify `false`, tolerations are applied to Collector, and the collector pods can schedule onto all nodes with taints. If you specify it as `true`, no tolerations are applied, and the collector pods are not scheduled onto nodes with taints.
`collector.resources.requests.memory`	The memory request for the Collector container. Use this parameter to override the default value.
`collector.resources.requests.cpu`	The CPU request for the Collector container. Use this parameter to override the default value.
`collector.resources.limits.memory`	The memory limit for the Collector container. Use this parameter to override the default value.
`collector.resources.limits.cpu`	The CPU limit for the Collector container. Use this parameter to override the default value.
`collector.complianceResources.requests.memory`	The memory request for the Compliance container. Use this parameter to override the default value.
`collector.complianceResources.requests.cpu`	The CPU request for the Compliance container. Use this parameter to override the default value.
`collector.complianceResources.limits.memory`	The memory limit for the Compliance container. Use this parameter to override the default value.
`collector.complianceResources.limits.cpu`	The CPU limit for the Compliance container. Use this parameter to override the default value.
`collector.serviceTLS.cert`	The internal service-to-service TLS certificate that Collector uses.
`collector.serviceTLS.key`	The internal service-to-service TLS certificate key that Collector uses.
`admissionControl.listenOnCreates`	This setting controls whether Kubernetes is configured to contact Red Hat Advanced Cluster Security for Kubernetes with `AdmissionReview` requests for workload creation events.
`admissionControl.listenOnUpdates`	When you set this parameter as `false`, Red Hat Advanced Cluster Security for Kubernetes creates the `ValidatingWebhookConfiguration` in a way that causes the Kubernetes API server not to send object update events. Since the volume of object updates is usually higher than the object creates, leaving this as `false` limits the load on the admission control service and decreases the chances of a malfunctioning admission control service.
`admissionControl.listenOnEvents`	This setting controls whether the cluster is configured to contact Red Hat Advanced Cluster Security for Kubernetes with `AdmissionReview` requests for Kubernetes `exec` and `portforward` events. Red Hat Advanced Cluster Security for Kubernetes does not support this feature on OpenShift Container Platform 3.11.
`admissionControl.dynamic.enforceOnCreates`	This setting controls whether Red Hat Advanced Cluster Security for Kubernetes evaluates policies; if it is disabled, all AdmissionReview requests are automatically accepted.
`admissionControl.dynamic.enforceOnUpdates`	This setting controls the behavior of the admission control service. You must specify `listenOnUpdates` as `true` for this to work.
`admissionControl.dynamic.scanInline`	If you set this option to `true`, the admission control service requests an image scan before making an admission decision. Since image scans take several seconds, enable this option only if you can ensure that all images used in your cluster are scanned before deployment (for example, by a CI integration during image build). This option corresponds to the Contact image scanners option in the RHACS Portal.
`admissionControl.dynamic.disableBypass`	Set it to `true` to disable bypassing the Admission controller.
`admissionControl.dynamic.timeout`	The maximum time, in seconds, Red Hat Advanced Cluster Security for Kubernetes should wait while evaluating admission review requests. Use this to set request timeouts when you enable image scanning. If the image scan runs longer than the specified time, Red Hat Advanced Cluster Security for Kubernetes accepts the request.
`admissionControl.resources.requests.memory`	The memory request for the Admission Control container. Use this parameter to override the default value.
`admissionControl.resources.requests.cpu`	The CPU request for the Admission Control container. Use this parameter to override the default value.
`admissionControl.resources.limits.memory`	The memory limit for the Admission Control container. Use this parameter to override the default value.
`admissionControl.resources.limits.cpu`	The CPU limit for the Admission Control container. Use this parameter to override the default value.
`admissionControl.nodeSelector`	Specify a node selector label as `label-key: label-value` to force Admission Control to only schedule on nodes with the specified label.
`admissionControl.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Admission Control. This parameter is mainly used for infrastructure nodes.
`admissionControl.serviceTLS.cert`	The internal service-to-service TLS certificate that Admission Control uses.
`admissionControl.serviceTLS.key`	The internal service-to-service TLS certificate key that Admission Control uses.
`registryOverride`	Use this parameter to override the default `docker.io` registry. Specify the name of your registry if you are using some other registry.
`collector.disableTaintTolerations`	If you specify `false`, tolerations are applied to Collector, and the Collector pods can schedule onto all nodes with taints. If you specify it as `true`, no tolerations are applied, and the Collector pods are not scheduled onto nodes with taints.
`createUpgraderServiceAccount`	Specify `true` to create the `sensor-upgrader` account. By default, Red Hat Advanced Cluster Security for Kubernetes creates a service account called `sensor-upgrader` in each secured cluster. This account is highly privileged but is only used during upgrades. If you do not create this account, you must complete future upgrades manually if the Sensor does not have enough permissions.
`createSecrets`	Specify `false` to skip the orchestrator secret creation for the Sensor, Collector, and Admission controller.
`collector.slimMode`	Specify `true` if you want to use a slim Collector image for deploying Collector. Using slim Collector images requires Central to provide the matching eBPF probe or kernel module. If you are running Red Hat Advanced Cluster Security for Kubernetes in offline mode, you must download a kernel support package from stackrox.io and upload it to Central for slim Collectors to function. Otherwise, you must ensure that Central can access the online probe repository hosted at https://collector-modules.stackrox.io/.
`sensor.resources`	Resource specification for Sensor.
`admissionControl.resources`	Resource specification for Admission controller.
`collector.resources`	Resource specification for Collector.
`collector.complianceResources`	Resource specification for Collector’s Compliance container.
`exposeMonitoring`	If you set this option to `true`, Red Hat Advanced Cluster Security for Kubernetes exposes Prometheus metrics endpoints on port number 9090 for the Sensor, Collector, and the Admission controller.
`auditLogs.disableCollection`	If you set this option to `true`, Red Hat Advanced Cluster Security for Kubernetes disables the audit log detection features used to detect access and modifications to configuration maps and secrets.
`scanner.disable`	If you set this option to `false`, Red Hat Advanced Cluster Security for Kubernetes deploys a lightweight scanner and Scanner DB in the secured cluster to allow scanning images on OpenShift Container Registry. Enabling Scanner is only supported on OpenShift. Defaults to `true`
`scanner.dbTolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner DB.
`scanner.replicas`	Resource specification for Collector’s Compliance container.
`scanner.logLevel`	Setting this parameter allows you to modify the scanner log level. Use this option only for troubleshooting purposes.
`scanner.autoscaling.disable`	If you set this option to `true`, Red Hat Advanced Cluster Security for Kubernetes disables autoscaling on the Scanner deployment.
`scanner.autoscaling.minReplicas`	The minimum number of replicas for autoscaling. Defaults to 2.
`scanner.autoscaling.maxReplicas`	The maximum number of replicas for autoscaling. Defaults to 5.
`scanner.nodeSelector`	Specify a node selector label as `label-key: label-value` to force Scanner to only schedule on nodes with the specified label.
`scanner.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner.
`scanner.dbNodeSelector`	Specify a node selector label as `label-key: label-value` to force Scanner DB to only schedule on nodes with the specified label.
`scanner.dbTolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner DB.
`scanner.resources.requests.memory`	The memory request for the Scanner container. Use this parameter to override the default value.
`scanner.resources.requests.cpu`	The CPU request for the Scanner container. Use this parameter to override the default value.
`scanner.resources.limits.memory`	The memory limit for the Scanner container. Use this parameter to override the default value.
`scanner.resources.limits.cpu`	The CPU limit for the Scanner container. Use this parameter to override the default value.
`scanner.dbResources.requests.memory`	The memory request for the Scanner DB container. Use this parameter to override the default value.
`scanner.dbResources.requests.cpu`	The CPU request for the Scanner DB container. Use this parameter to override the default value.
`scanner.dbResources.limits.memory`	The memory limit for the Scanner DB container. Use this parameter to override the default value.
`scanner.dbResources.limits.cpu`	The CPU limit for the Scanner DB container. Use this parameter to override the default value.

3.6.2.2.1.1. Environment variables

You can specify environment variables for Sensor and Admission controller in the following format:

customize:
  envVars:
    ENV_VAR1: "value1"
    ENV_VAR2: "value2"

The customize setting allows you to specify custom Kubernetes metadata (labels and annotations) for all objects created by this Helm chart and additional pod labels, pod annotations, and container environment variables for workloads.

The configuration is hierarchical, in the sense that metadata defined at a more generic scope (for example, for all objects) can be overridden by metadata defined at a narrower scope (for example, only for the Sensor deployment).

3.6.2.2.2. Installing the secured-cluster-services Helm chart

After you configure the values-public.yaml and values-private.yaml files, install the secured-cluster-services Helm chart to deploy the per-cluster and per-node components (Sensor, Admission controller, and Collector).

Caution

Prerequisites

You must have generated RHACS init bundle for your cluster.
You must have the address and the port number that you are exposing the Central service on.

Procedure

Run the following command:

$ helm install -n stackrox --create-namespace \
  stackrox-secured-cluster-services rhacs/secured-cluster-services \
  -f <name_of_cluster_init_bundle.yaml> \
  -f <path_to_values_public.yaml> -f <path_to_values_private.yaml> 1

1: Use the -f option to specify the paths for your YAML configuration files.

Note

To deploy secured-cluster-services Helm chart by using a continuous integration (CI) system, pass the init bundle YAML file as an environment variable to the helm install command:

$ helm install ... -f <(echo "$INIT_BUNDLE_YAML_SECRET") 1

1: If you are using base64 encoded variables, use the helm install … -f <(echo "$INIT_BUNDLE_YAML_SECRET" | base64 --decode) command instead.

Additional resources

Generating and applying an init bundle for RHACS on Red Hat OpenShift

3.6.2.3. Changing configuration options after deploying the secured-cluster-services Helm chart

You can make changes to any configuration options after you have deployed the secured-cluster-services Helm chart.

Procedure

Update the values-public.yaml and values-private.yaml configuration files with new values.
Run the helm upgrade command and specify the configuration files using the -f option:
```
$ helm upgrade -n stackrox \
  stackrox-secured-cluster-services rhacs/secured-cluster-services \
  --reuse-values \ 1
  -f <path_to_values_public.yaml> \
  -f <path_to_values_private.yaml>
```
1
You must specify the --reuse-values parameter, otherwise the Helm upgrade command resets all previously configured settings.
Note
You can also specify configuration values using the --set or --set-file parameters. However, these options are not saved, and it requires you to manually specify all the options again whenever you make changes.

3.6.3. Installing RHACS on secured clusters by using the roxctl CLI

To install RHACS on secured clusters by using the CLI, perform the following steps:

Install the roxctl CLI
Install Sensor.

3.6.3.1. Installing the roxctl CLI

You must first download the binary. You can install roxctl on Linux, Windows, or macOS.

3.6.3.1.1. Installing the roxctl CLI on Linux

You can install the roxctl CLI binary on Linux by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Linux/roxctl

Make the roxctl binary executable:
```
$ chmod +x roxctl
```
Place the roxctl binary in a directory that is on your PATH:
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

3.6.3.1.2. Installing the roxctl CLI on macOS

You can install the roxctl CLI binary on macOS by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Darwin/roxctl

Remove all extended attributes from the binary:
```
$ xattr -c roxctl
```
Make the roxctl binary executable:
```
$ chmod +x roxctl
```
Place the roxctl binary in a directory that is on your PATH:
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

3.6.3.1.3. Installing the roxctl CLI on Windows

You can install the roxctl CLI binary on Windows by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Windows/roxctl.exe

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

3.6.3.2. Installing Sensor

To monitor a cluster, you must deploy Sensor. You must deploy Sensor into each cluster that you want to monitor. The following steps describe adding Sensor by using the RHACS portal.

Prerequisites

You must have already installed Central services, or you can access Central services on Red Hat Advanced Cluster Security Cloud Service (ACSCS).

Procedure

On the RHACS portal, navigate to Platform Configuration → Clusters.
Select + New Cluster.
Specify a name for the cluster.
Provide appropriate values for the fields based on where you are deploying the Sensor.
- If you are deploying Sensor in the same cluster, accept the default values for all the fields.
- If you are deploying into a different cluster, replace central.stackrox.svc:443 with a load balancer, node port, or other address, including the port number, that is accessible from the other cluster.
- If you are using a non-gRPC capable load balancer, such as HAProxy, AWS Application Load Balancer (ALB), or AWS Elastic Load Balancing (ELB), use the WebSocket Secure (wss) protocol. To use wss:
  - Prefix the address with wss://.
  - Add the port number after the address, for example, wss://stackrox-central.example.com:443.
Click Next to continue with the Sensor setup.
Click Download YAML File and Keys to download the cluster bundle (zip archive).
Important
The cluster bundle zip archive includes unique configurations and keys for each cluster. Do not reuse the same files in another cluster.
From a system that has access to the monitored cluster, unzip and run the sensor script from the cluster bundle:
```
$ unzip -d sensor sensor-<cluster_name>.zip
```
```
$ ./sensor/sensor.sh
```
If you get a warning that you do not have the required permissions to deploy Sensor, follow the on-screen instructions, or contact your cluster administrator for assistance.

After Sensor is deployed, it contacts Central and provides cluster information.

Verification

Return to the RHACS portal and check if the deployment is successful. If successful, when viewing your list of clusters in Platform Configuration → Clusters, the cluster status displays a green checkmark and a Healthy status. If you do not see a green checkmark, use the following command to check for problems:
- On OpenShift Container Platform:
```
$ oc get pod -n stackrox -w
```
- On Kubernetes:
```
$ kubectl get pod -n stackrox -w
```
Click Finish to close the window.

After installation, Sensor starts reporting security information to RHACS and the RHACS portal dashboard begins showing deployments, images, and policy violations from the cluster on which you have installed the Sensor.

3.7. Verifying installation of RHACS on Red Hat OpenShift

Provides steps to verify that RHACS is properly installed.

3.7.1. Verifying installation

After you complete the installation, run a few vulnerable applications and navigate to the RHACS portal to evaluate the results of security assessments and policy violations.

Note

The sample applications listed in the following section contain critical vulnerabilities and they are specifically designed to verify the build and deploy-time assessment features of Red Hat Advanced Cluster Security for Kubernetes.

To verify installation:

Find the address of the RHACS portal based on your exposure method:
1. For a route:
```
$ oc get route central -n stackrox
```
2. For a load balancer:
```
$ oc get service central-loadbalancer -n stackrox
```
3. For port forward:
  1. Run the following command:
    $ oc port-forward svc/central 18443:443 -n stackrox
  2. Navigate to https://localhost:18443/.
Using the Red Hat OpenShift CLI, create a new project:
```
$ oc new-project test
```

Start some applications with critical vulnerabilities:

$ oc run shell --labels=app=shellshock,team=test-team \
  --image=vulnerables/cve-2014-6271 -n test
$ oc run samba --labels=app=rce \
  --image=vulnerables/cve-2017-7494 -n test

Red Hat Advanced Cluster Security for Kubernetes automatically scans these deployments for security risks and policy violations as soon as they are submitted to the cluster. Navigate to the RHACS portal to view the violations. You can log in to the RHACS portal by using the default username admin and the generated password.

Chapter 4. Installing RHACS on other platforms

4.1. High-level overview of installing RHACS on other platforms

Red Hat Advanced Cluster Security for Kubernetes (RHACS) provides security services for self-managed RHACS on platforms such as Amazon Elastic Kubernetes Service (Amazon EKS), Google Kubernetes Engine (Google GKE), and Microsoft Azure Kubernetes Service (Microsoft AKS).

Before you install:

Understand the installation platforms and methods.
Understand Red Hat Advanced Cluster Security for Kubernetes architecture.
Review the prerequisites.

The following list provides a high-level overview of installation steps:

Install Central services on a cluster using Helm charts or the roxctl CLI.
Generate and apply an init bundle.
Install secured cluster resources on each of your secured clusters.

4.2. Prerequisites for RHACS on other platforms

Before installing RHACS on other platforms such as Amazon Elastic Kubernetes Service (Amazon EKS), Google Kubernetes Engine (Google GKE), and Microsoft Azure Kubernetes Service (Microsoft AKS), ensure that you have met the prerequisites.

4.2.1. General requirements

RHACS has some system requirements that must be met before installing.

Warning

You must not install Red Hat Advanced Cluster Security for Kubernetes on:

Amazon Elastic File System (Amazon EFS). Use the Amazon Elastic Block Store (Amazon EBS) with the default gp2 volume type instead.
Older CPUs that do not have the Streaming SIMD Extensions (SSE) 4.2 instruction set. For example, Intel processors older than Sandy Bridge and AMD processors older than Bulldozer. (These processors were released in 2011.)

To install Red Hat Advanced Cluster Security for Kubernetes, you must have:

OpenShift Container Platform version 4.5 or later
Cluster nodes with a supported operating system. For more information, see the Red Hat Advanced Cluster Security for Kubernetes Support Policy.
- Operating system: Amazon Linux, CentOS, Container-Optimized OS from Google, Red Hat Enterprise Linux CoreOS (RHCOS), Debian, Red Hat Enterprise Linux (RHEL), or Ubuntu.
- Processor and memory: 2 CPU cores and at least 3GiB of RAM.
  Note
  For deploying Central, use a machine type with four or more cores and apply scheduling policies to launch Central on such nodes.
- Architectures: AMD64 or ppc64le.
  Note
  You can only install RHACS Secured cluster services on {ibm-power}, {ibm-zsystems}, and {ibm-linuxone} clusters. Central is not supported at this time.
Persistent storage by using persistent volume claim (PVC).
Important
You must not use Ceph FS storage with Red Hat Advanced Cluster Security for Kubernetes. Red Hat recommends using RBD block mode PVCs for Red Hat Advanced Cluster Security for Kubernetes.
- Use Solid-State Drives (SSDs) for best performance. However, you can use another storage type if you do not have SSDs available.

To install using Helm charts:

You must have Helm command-line interface (CLI) v3.2 or newer, if you are installing or configuring Red Hat Advanced Cluster Security for Kubernetes using Helm charts. Use the helm version command to verify the version of Helm you have installed.
The Red Hat OpenShift CLI (oc).
You must have access to the Red Hat Container Registry. For information about downloading images from registry.redhat.io, see Red Hat Container Registry Authentication.

4.2.2. Prerequisites for installing Central

A single containerized service called Central handles data persistence, API interactions, and user interface (Portal) access.

Central requires persistent storage:

You can provide storage with a persistent volume claim (PVC).
Note
You can use a hostPath volume for storage only if all your hosts (or a group of hosts) mount a shared file system, such as an NFS share or a storage appliance. Otherwise, your data is only saved on a single node. Red Hat does not recommend using a hostPath volume.
Use Solid-State Drives (SSD) for best performance. However, you can use another storage type if you do not have SSDs available.
If you use a web proxy or firewall, you must configure bypass rules to allow traffic for the definitions.stackrox.io and collector-modules.stackrox.io domains and enable Red Hat Advanced Cluster Security for Kubernetes to trust your web proxy or firewall. Otherwise, updates for vulnerability definitions and kernel support packages will fail.
Red Hat Advanced Cluster Security for Kubernetes requires access to:
- definitions.stackrox.io for downloading updated vulnerability definitions. Vulnerability definition updates allow Red Hat Advanced Cluster Security for Kubernetes to maintain up-to-date vulnerability data when new vulnerabilities are discovered or additional data sources are added.
- collector-modules.stackrox.io to download updated kernel support packages. Updated Kernel support packages ensure that Red Hat Advanced Cluster Security for Kubernetes can monitor the latest operating systems and collect data about the network traffic and processes running inside the containers. Without these updates, Red Hat Advanced Cluster Security for Kubernetes might fail to monitor containers if you add new nodes in your cluster or if you update your nodes' operating system.

Note

For security reasons, you should deploy Central in a cluster with limited administrative access.

Memory and storage requirements

The following table lists the minimum memory and storage values required to install and run Central.

Central	CPU	Memory	Storage
Request	1.5 cores	4 GiB	100 GiB
Limit	4 cores	8 GiB	100 GiB

Sizing guidelines

Use the following compute resources and storage values depending upon the number of nodes in your cluster.

Nodes	Deployments	CPU	Memory	Storage
Up to 100	Up to 1000	2 cores	4 GiB	100 GiB
Up to 500	Up to 2000	4 cores	8 GiB	100 GiB
More than 500	More than 2000	8 cores	12 - 16 GiB	100 - 200 GiB

4.2.3. Prerequisites for installing Scanner

Memory and storage requirements

Scanner	CPU	Memory
Request	1.2 cores	2700 MiB
Limit	5 cores	8000 MiB

4.2.4. Prerequisites for installing Sensor

Memory and storage requirements

Sensor	CPU	Memory
Request	1 core	1 GiB
Limit	2 cores	4 GiB

4.2.5. Prerequisites for installing Admission controller

The Admission controller prevents users from creating workloads that violate policies you configure.

Memory and storage requirements

By default, the admission control service runs 3 replicas. The following table lists the request and limits for each replica.

Admission controller	CPU	Memory
Request	.05 cores	100 MiB
Limit	.5 cores	500 MiB

4.2.6. Prerequisites for installing Collector

Collector monitors runtime activity on each node in your secured clusters. It connects to Sensor to report this information.

Caution

Memory and storage requirements

Collector	CPU	Memory
Request	.05 cores	320 MiB
Limit	.75 cores	1 GiB

Note

4.3. Installing Central services for RHACS on other platforms

You can install Central by using one of the following methods:

Install using Helm charts
Install using the roxctl CLI (do not use this method unless you have a specific installation need that requires using it)

4.3.1. Install Central using Helm charts

You can install Central using Helm charts without any customization, using the default values, or by using Helm charts with additional customizations of configuration parameters.

4.3.1.1. Install Central using Helm charts without customization

You can install RHACS on your Red Hat OpenShift cluster without any customizations. You must add the Helm chart repository and install the central-services Helm chart to install the centralized components of Central and Scanner.

4.3.1.1.1. Adding the Helm chart repository

Procedure

Add the RHACS charts repository.

$ helm repo add rhacs https://mirror.openshift.com/pub/rhacs/charts/

The Helm repository for Red Hat Advanced Cluster Security for Kubernetes includes Helm charts for installing different components, including:

Central services Helm chart (central-services) for installing the centralized components (Central and Scanner).
Note
You deploy centralized components only once and you can monitor multiple separate clusters by using the same installation.
Secured Cluster Services Helm chart (secured-cluster-services) for installing the per-cluster (Sensor and Admission controller) and per-node (Collector) components.
Note
Deploy the per-cluster components into each cluster that you want to monitor and deploy the per-node components in all nodes that you want to monitor.

Verification

Run the following command to verify the added chart repository:
```
$ helm search repo -l rhacs/
```

4.3.1.1.2. Installing the central-services Helm chart without customizations

Use the following instructions to install the central-services Helm chart to deploy the centralized components (Central and Scanner).

Prerequisites

You must have access to the Red Hat Container Registry. For information about downloading images from registry.redhat.io, see Red Hat Container Registry Authentication.

Procedure

Run the following command to install Central services and expose Central using a route:

$ helm install -n stackrox \
  --create-namespace stackrox-central-services rhacs/central-services \
  --set imagePullSecrets.username=<username> \
  --set imagePullSecrets.password=<password> \
  --set central.exposure.route.enabled=true

Or, run the following command to install Central services and expose Central using a load balancer:

$ helm install -n stackrox \
  --create-namespace stackrox-central-services rhacs/central-services \
  --set imagePullSecrets.username=<username> \
  --set imagePullSecrets.password=<password> \
  --set central.exposure.loadBalancer.enabled=true

Or, run the following command to install Central services and expose Central using port forward:

$ helm install -n stackrox \
  --create-namespace stackrox-central-services rhacs/central-services \
    --set imagePullSecrets.username=<username> \
  --set imagePullSecrets.password=<password>

Important

If you are installing Red Hat Advanced Cluster Security for Kubernetes in a cluster that requires a proxy to connect to external services, you must specify your proxy configuration by using the proxyConfig parameter. For example:
```
env:
  proxyConfig: |
    url: http://proxy.name:port
    username: username
    password: password
    excludes:
    - some.domain
```
If you already created one or more image pull secrets in the namespace in which you are installing, instead of using a username and password, you can use --set imagePullSecrets.useExisting="<pull-secret-1;pull-secret-2>".
Do not use image pull secrets:
- If you are pulling your images from quay.io/stackrox-io or a registry in a private network that does not require authentication. Use use --set imagePullSecrets.allowNone=true instead of specifying a username and password.
- If you already configured image pull secrets in the default service account in the namespace you are installing. Use --set imagePullSecrets.useFromDefaultServiceAccount=true instead of specifying a username and password.

The output of the installation command includes:

An automatically generated administrator password.
Instructions on storing all the configuration values.
Any warnings that Helm generates.

4.3.1.2. Install Central using Helm charts with customizations

Create the following files for configuring the Helm chart for installing Red Hat Advanced Cluster Security for Kubernetes:

Public configuration file values-public.yaml: Use this file to save all non-sensitive configuration options.
Private configuration file values-private.yaml: Use this file to save all sensitive configuration options. Ensure that you store this file securely.

4.3.1.2.1. Private configuration file

This section lists the configurable parameters of the values-private.yaml file. There are no default values for these parameters.

4.3.1.2.1.1. Image pull secrets

The credentials that are required for pulling images from the registry depend on the following factors:

If you are using a custom registry, you must specify these parameters:
- imagePullSecrets.username
- imagePullSecrets.password
- image.registry
If you do not use a username and password to log in to the custom registry, you must specify one of the following parameters:
- imagePullSecrets.allowNone
- imagePullSecrets.useExisting
- imagePullSecrets.useFromDefaultServiceAccount

Parameter	Description
`imagePullSecrets.username`	The username of the account that is used to log in to the registry.
`imagePullSecrets.password`	The password of the account that is used to log in to the registry.
`imagePullSecrets.allowNone`	Use `true` if you are using a custom registry and it allows pulling images without credentials.
`imagePullSecrets.useExisting`	A comma-separated list of secrets as values. For example, `secret1, secret2, secretN`. Use this option if you have already created pre-existing image pull secrets with the given name in the target namespace.
`imagePullSecrets.useFromDefaultServiceAccount`	Use `true` if you have already configured the default service account in the target namespace with sufficiently scoped image pull secrets.

4.3.1.2.1.2. Proxy configuration

env:
  proxyConfig: |
    url: http://proxy.name:port
    username: username
    password: password
    excludes:
    - some.domain

Parameter	Description
`env.proxyConfig`	Your proxy configuration.

4.3.1.2.1.3. Central

Configurable parameters for Central.

For a new installation, you can skip the following parameters:

central.jwtSigner.key
central.serviceTLS.cert
central.serviceTLS.key
central.adminPassword.value
central.adminPassword.htpasswd
When you do not specify values for these parameters the Helm chart autogenerates values for them.
If you want to modify these values you can use the helm upgrade command and specify the values using the --set option.

Important

For setting the administrator password, you can only use either central.adminPassword.value or central.adminPassword.htpasswd, but not both.

Parameter	Description
`central.jwtSigner.key`	A private key which Red Hat Advanced Cluster Security for Kubernetes should use for signing JSON web tokens (JWTs) for authentication.
`central.serviceTLS.cert`	An internal certificate that the Central service should use for deploying Central.
`central.serviceTLS.key`	The private key of the internal certificate that the Central service should use.
`central.defaultTLS.cert`	The user-facing certificate that Central should use. Red Hat Advanced Cluster Security for Kubernetes uses this certificate for RHACS portal. For a new installation, you must provide a certificate, otherwise, Red Hat Advanced Cluster Security for Kubernetes installs Central by using a self-signed certificate. If you are upgrading, Red Hat Advanced Cluster Security for Kubernetes uses the existing certificate and its key.
`central.defaultTLS.key`	The private key of the user-facing certificate that Central should use. For a new installation, you must provide the private key, otherwise, Red Hat Advanced Cluster Security for Kubernetes installs Central by using a self-signed certificate. If you are upgrading, Red Hat Advanced Cluster Security for Kubernetes uses the existing certificate and its key.
`central.adminPassword.value`	Administrator password for logging into Red Hat Advanced Cluster Security for Kubernetes.
`central.adminPassword.htpasswd`	Administrator password for logging into Red Hat Advanced Cluster Security for Kubernetes. This password is stored in hashed format using bcrypt.

Note

If you are using central.adminPassword.htpasswd parameter, you must use a bcrypt encoded password hash. You can run the command htpasswd -nB admin to generate a password hash. For example,

htpasswd: |
  admin:<bcrypt-hash>

4.3.1.2.1.4. Scanner

Configurable parameters for Scanner.

scanner.dbPassword.value
scanner.serviceTLS.cert
scanner.serviceTLS.key
scanner.dbServiceTLS.cert
scanner.dbServiceTLS.key

Parameter	Description
`scanner.dbPassword.value`	The password to use for authentication with Scanner database. Do not modify this parameter because Red Hat Advanced Cluster Security for Kubernetes automatically creates and uses its value internally.
`scanner.serviceTLS.cert`	An internal certificate that the Scanner service should use for deploying Scanner.
`scanner.serviceTLS.key`	The private key of the internal certificate that the Scanner service should use.
`scanner.dbServiceTLS.cert`	An internal certificate that the Scanner-db service should use for deploying Scanner database.
`scanner.dbServiceTLS.key`	The private key of the internal certificate that the Scanner-db service should use.

4.3.1.2.2. Public configuration file

This section lists the configurable parameters of the values-public.yaml file.

4.3.1.2.2.1. Image pull secrets

Image pull secrets are the credentials required for pulling images from your registry.

Parameter	Description
`imagePullSecrets.allowNone`	Use `true` if you are using a custom registry and it allows pulling images without credentials.
`imagePullSecrets.useExisting`	A comma-seprated list of secrets as values. For example, `secret1, secret2`. Use this option if you have already created pre-existing image pull secrets with the given name in the target namespace.
`imagePullSecrets.useFromDefaultServiceAccount`	Use `true` if you have already configured the default service account in the target namespace with sufficiently scoped image pull secrets.

4.3.1.2.2.2. Image

Image declares the configuration to set up the main registry, which the Helm chart uses to resolve images for the central.image, scanner.image, and scanner.dbImage parameters.

Parameter	Description
`image.registry`	Address of your image registry. Either use a hostname, such as `registry.redhat.io`, or a remote registry hostname, such as `us.gcr.io/stackrox-mirror`.

4.3.1.2.2.3. Environment variables

Parameter	Description
`env.openshift`	Use `true` for installing on an OpenShift Container Platform cluster and overriding automatic cluster environment detection.
`env.istio`	Use `true` for installing on an Istio enabled cluster and overriding automatic cluster environment detection.
`env.platform`	The platform on which you are installing Red Hat Advanced Cluster Security for Kubernetes. Set its value to `default` or `gke` to specify cluster platform and override automatic cluster environment detection.
`env.offlineMode`	Use `true` to use Red Hat Advanced Cluster Security for Kubernetes in offline mode.

4.3.1.2.2.4. Additional trusted certificate authorities

Parameter	Description
`additionalCAs.<certificate_name>`	Specify the PEM encoded certificate of the root certificate authority to trust.

4.3.1.2.2.5. Central

Configurable parameters for Central.

You must specify a persistent storage option as either hostPath or persistentVolumeClaim.
For exposing Central deployment for external access. You must specify one parameter, either central.exposure.loadBalancer, central.exposure.nodePort, or central.exposure.route. When you do not specify any value for these parameters, you must manually expose Central or access it by using port-forwarding.

Parameter	Description
`central.disableTelemetry`	Use `true` to disable online telemetry data collection.
`central.endpointsConfig`	The endpoint configuration options for Central.
`central.nodeSelector`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Central. This parameter is mainly used for infrastructure nodes.
`central.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Central. This parameter is mainly used for infrastructure nodes.
`central.exposeMonitoring`	Specify `true` to expose Prometheus metrics endpoint for Central on port number `9090`.
`central.image.registry`	A custom registry that overrides the global `image.registry` parameter for the Central image.
`central.image.name`	The custom image name that overrides the default Central image name (`main`).
`central.image.tag`	The custom image tag that overrides the default tag for Central image. If you specify you own image tag during a new installation, you must manually increment this tag when you to upgrade to a new version by running the `helm upgrade` command. If you mirror Central images in your own registry, do not modify the original image tags.
`central.image.fullRef`	Full reference including registry address, image name, and image tag for the Central image. Setting a value for this parameter overrides the `central.image.registry`, `central.image.name`, and `central.image.tag` parameters.
`central.resources.requests.memory`	The memory request for Central to override the default value.
`central.resources.requests.cpu`	The CPU request for Central to override the default value.
`central.resources.limits.memory`	The memory limit for Central to override the default value.
`central.resources.limits.cpu`	The CPU limit for Central to override the default value.
`central.persistence.hostPath`	The path on the node where Red Hat Advanced Cluster Security for Kubernetes should create a database volume. Red Hat does not recommend using this option.
`central.persistence.persistentVolumeClaim.claimName`	The name of the persistent volume claim (PVC) you are using.
`central.persistence.persistentVolumeClaim.createClaim`	Use `true` to create a new persistent volume claim, or `false` to use an existing claim.
`central.persistence.persistentVolumeClaim.size`	The size (in GiB) of the persistent volume managed by the specified claim.
`central.exposure.loadBalancer.enabled`	Use `true` to expose Central by using a load balancer.
`central.exposure.loadBalancer.port`	The port number on which to expose Central. The default port number is 443.
`central.exposure.nodePort.enabled`	Use `true` to expose Central by using the node port service.
`central.exposure.nodePort.port`	The port number on which to expose Central. When you skip this parameter, OpenShift Container Platform automatically assigns a port number. Red Hat recommends that you do not specify a port number if you are exposing Red Hat Advanced Cluster Security for Kubernetes by using a node port.
`central.exposure.route.enabled`	Use `true` to expose Central by using a route. This parameter is only available for OpenShift Container Platform clusters.

4.3.1.2.2.6. Scanner

Configurable parameters for Scanner.

Parameter	Description
`scanner.disable`	Use `true` to install Red Hat Advanced Cluster Security for Kubernetes without Scanner. When you use it with the `helm upgrade` command, Helm removes existing Scanner deployment.
`scanner.exposeMonitoring`	Specify `true` to expose Prometheus metrics endpoint for Scanner on port number `9090`.
`scanner.replicas`	The number of replicas to create for the Scanner deployment. When you use it with the `scanner.autoscaling` parameter, this value sets the initial number of replicas.
`scanner.logLevel`	Configure the log level for Scanner. Red Hat recommends that you not change the log level’s default value (`INFO`).
`scanner.nodeSelector`	Specify a node selector label as `label-key: label-value` to force Scanner to only schedule on nodes with the specified label.
`scanner.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner. This parameter is mainly used for infrastructure nodes.
`scanner.autoscaling.disable`	Use `true` to disable autoscaling for Scanner deployment. When you disable autoscaling, the `minReplicas` and `maxReplicas` parameters do not have any effect.
`scanner.autoscaling.minReplicas`	The minimum number of replicas for autoscaling.
`scanner.autoscaling.maxReplicas`	The maximum number of replicas for autoscaling.
`scanner.resources.requests.memory`	The memory request for Scanner to override the default value.
`scanner.resources.requests.cpu`	The CPU request for Scanner to override the default value.
`scanner.resources.limits.memory`	The memory limit for Scanner to override the default value.
`scanner.resources.limits.cpu`	The CPU limit for Scanner to override the default value.
`scanner.dbResources.requests.memory`	The memory request for Scanner database deployment to override the default values.
`scanner.dbResources.requests.cpu`	The CPU request for Scanner database deployment to override the default values.
`scanner.dbResources.limits.memory`	The memory limit for Scanner database deployment to override the default values.
`scanner.dbResources.limits.cpu`	The CPU limit for Scanner database deployment to override the default values.
`scanner.image.registry`	A custom registry for the Scanner image.
`scanner.image.name`	The custom image name that overrides the default Scanner image name (`scanner`).
`scanner.dbImage.registry`	A custom registry for the Scanner DB image.
`scanner.dbImage.name`	The custom image name that overrides the default Scanner DB image name (`scanner-db`).
`scanner.dbNodeSelector`	Specify a node selector label as `label-key: label-value` to force Scanner DB to only schedule on nodes with the specified label.
`scanner.dbTolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner DB. This parameter is mainly used for infrastructure nodes.

4.3.1.2.2.7. Customization

Use these parameters to specify additional attributes for all objects that Red Hat Advanced Cluster Security for Kubernetes creates.

Parameter	Description
`customize.labels`	A custom label to attach to all objects.
`customize.annotations`	A custom annotation to attach to all objects.
`customize.podLabels`	A custom label to attach to all deployments.
`customize.podAnnotations`	A custom annotation to attach to all deployments.
`customize.envVars`	A custom environment variable for all containers in all objects.
`customize.central.labels`	A custom label to attach to all objects that Central creates.
`customize.central.annotations`	A custom annotation to attach to all objects that Central creates.
`customize.central.podLabels`	A custom label to attach to all Central deployments.
`customize.central.podAnnotations`	A custom annotation to attach to all Central deployments.
`customize.central.envVars`	A custom environment variable for all Central containers.
`customize.scanner.labels`	A custom label to attach to all objects that Scanner creates.
`customize.scanner.annotations`	A custom annotation to attach to all objects that Scanner creates.
`customize.scanner.podLabels`	A custom label to attach to all Scanner deployments.
`customize.scanner.podAnnotations`	A custom annotation to attach to all Scanner deployments.
`customize.scanner.envVars`	A custom environment variable for all Scanner containers.
`customize.scanner-db.labels`	A custom label to attach to all objects that Scanner DB creates.
`customize.scanner-db.annotations`	A custom annotation to attach to all objects that Scanner DB creates.
`customize.scanner-db.podLabels`	A custom label to attach to all Scanner DB deployments.
`customize.scanner-db.podAnnotations`	A custom annotation to attach to all Scanner DB deployments.
`customize.scanner-db.envVars`	A custom environment variable for all Scanner DB containers.

You can also use:

the customize.other.service/*.labels and the customize.other.service/*.annotations parameters, to specify labels and annotations for all objects.
or, provide a specific service name, for example, customize.other.service/central-loadbalancer.labels and customize.other.service/central-loadbalancer.annotations as parameters and set their value.

4.3.1.2.2.8. Advanced customization

Important

The parameters specified in this section are for information only. Red Hat does not support Red Hat Advanced Cluster Security for Kubernetes instances with modified namespace and release names.

Parameter	Description
`allowNonstandardNamespace`	Use `true` to deploy Red Hat Advanced Cluster Security for Kubernetes into a namespace other than the default namespace `stackrox`.
`allowNonstandardReleaseName`	Use `true` to deploy Red Hat Advanced Cluster Security for Kubernetes with a release name other than the default `stackrox-central-services`.

4.3.1.2.3. Installing the central-services Helm chart

After you configure the values-public.yaml and values-private.yaml files, install the central-services Helm chart to deploy the centralized components (Central and Scanner).

Procedure

Run the following command:

$ helm install -n stackrox --create-namespace \
  stackrox-central-services rhacs/central-services \
  -f <path_to_values_public.yaml> -f <path_to_values_private.yaml> 1

1: Use the -f option to specify the paths for your YAML configuration files.

4.3.1.3. Changing configuration options after deploying the central-services Helm chart

You can make changes to any configuration options after you have deployed the central-services Helm chart.

Procedure

Update the values-public.yaml and values-private.yaml configuration files with new values.
Run the helm upgrade command and specify the configuration files using the -f option:
```
$ helm upgrade -n stackrox \
  stackrox-central-services rhacs/central-services \
  -f <path_to_values_public.yaml> \
  -f <path_to_values_private.yaml>
```
Note
You can also specify configuration values using the --set or --set-file parameters. However, these options are not saved, and it requires you to manually specify all the options again whenever you make changes.

4.3.2. Install Central using the roxctl CLI

Warning

4.3.2.1. Installing the roxctl CLI

To install Red Hat Advanced Cluster Security for Kubernetes you must install the roxctl CLI by downloading the binary. You can install roxctl on Linux, Windows, or macOS.

4.3.2.1.1. Installing the roxctl CLI on Linux

You can install the roxctl CLI binary on Linux by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Linux/roxctl

Make the roxctl binary executable:
```
$ chmod +x roxctl
```
Place the roxctl binary in a directory that is on your PATH:
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

4.3.2.1.2. Installing the roxctl CLI on macOS

You can install the roxctl CLI binary on macOS by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Darwin/roxctl

Remove all extended attributes from the binary:
```
$ xattr -c roxctl
```
Make the roxctl binary executable:
```
$ chmod +x roxctl
```
Place the roxctl binary in a directory that is on your PATH:
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

4.3.2.1.3. Installing the roxctl CLI on Windows

You can install the roxctl CLI binary on Windows by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Windows/roxctl.exe

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

4.3.2.2. Using the interactive installer

Use the interactive installer to generate the required secrets, deployment configurations, and deployment scripts for your environment.

Procedure

Run the interactive install command:
```
$ roxctl central generate interactive
```
Important
Installing Red Hat Advanced Cluster Security for Kubernetes using roxctl CLI creates PodSecurityPolicy (PSP) objects by default for backward compatibility. If you install RHACS on Kubernetes versions 1.25 and newer or OpenShift Container Platform version 4.12 and newer, you must disable the PSP object creation. To do this, specify --enable-pod-security-policies option as false for the roxctl central generate and roxctl sensor generate commands.

Press Enter to accept the default value for a prompt or enter custom values as required.

Enter path to the backup bundle from which to restore keys and certificates (optional):
Enter PEM cert bundle file (optional): 1
Enter administrator password (default: autogenerated):
Enter orchestrator (k8s, openshift): openshift
Enter the directory to output the deployment bundle to (default: "central-bundle"):
Enter the OpenShift major version (3 or 4) to deploy on (default: "0"): 4
Enter Istio version when deploying into an Istio-enabled cluster (leave empty when not running Istio) (optional):
Enter the method of exposing Central (route, lb, np, none) (default: "none"): route 2
Enter main image to use (default: "stackrox.io/main:3.0.61.1"):
Enter whether to run StackRox in offline mode, which avoids reaching out to the Internet (default: "false"):
Enter whether to enable telemetry (default: "true"):
Enter the deployment tool to use (kubectl, helm, helm-values) (default: "kubectl"):
Enter Scanner DB image to use (default: "stackrox.io/scanner-db:2.15.2"):
Enter Scanner image to use (default: "stackrox.io/scanner:2.15.2"):
Enter Central volume type (hostpath, pvc): pvc 3
Enter external volume name (default: "stackrox-db"):
Enter external volume size in Gi (default: "100"):
Enter storage class name (optional if you have a default StorageClass configured):

1: If you want to add a custom TLS certificate, provide the file path for the PEM-encoded certificate. When you specify a custom certificate the interactive installer also prompts you to provide a PEM private key for the custom certificate you are using.
2: To use the RHACS portal, you must expose Central by using a route, a load balancer or a node port.
3: If you plan to install Red Hat Advanced Cluster Security for Kubernetes on OpenShift Container Platform with a hostPath volume, you must modify the SELinux policy.

Warning

$ sudo chcon -Rt svirt_sandbox_file_t <full_volume_path>

However, Red Hat does not recommend modifying the SELinux policy, instead use PVC when installing on OpenShift Container Platform.

4.3.2.3. Running the Central installation scripts

After you run the interactive installer, you can run the setup.sh script to install Central.

Procedure

Run the setup.sh script to configure image registry access:
```
$ ./central-bundle/central/scripts/setup.sh
```

Create the necessary resources:

$ oc create -R -f central-bundle/central

Check the deployment progress:
```
$ oc get pod -n stackrox -w
```

Exposure method	Command	Address	Example
Route	`oc -n stackrox get route central`	The address under the `HOST/PORT` column in the output	`https://central-stackrox.example.route`
Node Port	`oc get node -owide && oc -n stackrox get svc central-loadbalancer`	IP or hostname of any node, on the port shown for the service	`https://198.51.100.0:31489`
Load Balancer	`oc -n stackrox get svc central-loadbalancer`	EXTERNAL-IP or hostname shown for the service, on port 443	`https://192.0.2.0`
None	`central-bundle/central/scripts/port-forward.sh 8443`	`https://localhost:8443`	`https://localhost:8443`

Note

If you have selected autogenerated password during the interactive install, you can run the following command to see it for logging into Central:

$ cat central-bundle/password

4.4. Generating and applying an init bundle for RHACS on other platforms

Note

You must have the Admin user role to create an init bundle.

4.4.1. Generating an init bundle

4.4.1.1. Generating an init bundle by using the RHACS portal

You can create an init bundle containing secrets by using the RHACS portal.

Note

You must have the Admin user role to create an init bundle.

Procedure

Find the address of the RHACS portal based on your exposure method:
1. For a route:
```
$ oc get route central -n stackrox
```
2. For a load balancer:
```
$ oc get service central-loadbalancer -n stackrox
```
3. For port forward:
  1. Run the following command:
    $ oc port-forward svc/central 18443:443 -n stackrox
  2. Navigate to https://localhost:18443/.
On the RHACS portal, navigate to Platform Configuration → Integrations.
Navigate to the Authentication Tokens section and click on Cluster Init Bundle.
Click Generate bundle.
Enter a name for the cluster init bundle and click Generate.
1. If you are installing using Helm charts, click Download Helm Values File to download the generated bundle.
2. If you are installing using the Operator, click Download Kubernetes Secret File to download the generated bundle.

Important

Store this bundle securely because it contains secrets. You can use the same bundle to create multiple secured clusters.

Next steps

Apply the init bundle by creating a resource on the secured cluster.
Install secured cluster services on each cluster.

4.4.1.2. Generating an init bundle by using the roxctl CLI

You can create an init bundle with secrets by using the roxctl CLI.

Note

You must have the Admin user role to create init bundles.

Prerequisites

You have configured the ROX_API_TOKEN and the ROX_CENTRAL_ADDRESS environment variables.

Set the ROX_API_TOKEN and the ROX_CENTRAL_ADDRESS environment variables:

$ export ROX_API_TOKEN=<api_token>

$ export ROX_CENTRAL_ADDRESS=<address>:<port_number>

Procedure

Run the following command to generate a cluster init bundle containing secrets:

For Helm installations:

$ roxctl -e "$ROX_CENTRAL_ADDRESS" \
  central init-bundles generate <cluster_init_bundle_name> \
  --output cluster_init_bundle.yaml

For Operator installations:

$ roxctl -e "$ROX_CENTRAL_ADDRESS" \
  central init-bundles generate <cluster_init_bundle_name> \
  --output-secrets cluster_init_bundle.yaml

Important

Ensure that you store this bundle securely because it contains secrets. You can use the same bundle to set up multiple secured clusters.

Next Step

Use the Red Hat OpenShift CLI to create resources using the init bundle.

4.4.2. Creating resources by using the init bundle

Before you install secured clusters, you must use the init bundle to create the required resources on the cluster that will allow the services on the secured clusters to communicate with Central.

Note

If you are installing by using Helm charts, do not perform this step.

Prerequisites

You must have generated an init bundle containing secrets.

Procedure

Using the Red Hat OpenShift CLI, run the following command to create the resources:
```
$ oc create -f <init_bundle>.yaml \ 1
  -n <stackrox> 2
```
1
Specify the file name of the init bundle containing the secrets.
2
Specify the name of the project where Central services are installed.
Using the kubectl CLI, run the following commands to create the resources:
```
$ kubectl create namespace stackrox
$ kubectl create -f <init_bundle>.yaml \ 1
  -n <stackrox> 2
```
1
Specify the file name of the init bundle containing the secrets.
2
Specify the name of the project where secured cluster services will be installed.

Next Step

Install RHACS secured cluster services in all clusters that you want to monitor.

4.5. Installing secured cluster services for RHACS on other platforms

You can install Red Hat Advanced Cluster Security Cloud Service on your secured clusters for platforms such as Amazon Elastic Kubernetes Service (Amazon EKS), Google Kubernetes Engine (Google GKE), and Microsoft Azure Kubernetes Service (Microsoft AKS).

4.5.1. Installing RHACS on secured clusters by using Helm charts

You can install RHACS on secured clusters by using Helm charts with no customization, using the default values, or with customizations of configuration parameters.

4.5.1.1. Installing RHACS on secured clusters by using Helm charts without customizations

4.5.1.1.1. Adding the Helm chart repository

Procedure

Add the RHACS charts repository.

$ helm repo add rhacs https://mirror.openshift.com/pub/rhacs/charts/

The Helm repository for Red Hat Advanced Cluster Security for Kubernetes includes Helm charts for installing different components, including:

Central services Helm chart (central-services) for installing the centralized components (Central and Scanner).
Note
You deploy centralized components only once and you can monitor multiple separate clusters by using the same installation.
Secured Cluster Services Helm chart (secured-cluster-services) for installing the per-cluster (Sensor and Admission controller) and per-node (Collector) components.
Note
Deploy the per-cluster components into each cluster that you want to monitor and deploy the per-node components in all nodes that you want to monitor.

Verification

Run the following command to verify the added chart repository:
```
$ helm search repo -l rhacs/
```

4.5.1.1.2. Installing the secured-cluster-services Helm chart without customization

Use the following instructions to install the secured-cluster-services Helm chart to deploy the per-cluster and per-node components (Sensor, Admission controller, and Collector).

Caution

Prerequisites

You must have generated RHACS init bundle for your cluster.
You must have the address and the port number that you are exposing the Central service on.

Procedure

Run the following command on your Kubernetes based clusters:

$ helm install -n stackrox --create-namespace \
    stackrox-secured-cluster-services rhacs/secured-cluster-services \
    -f <path_to_cluster_init_bundle.yaml> \ 1
    --set clusterName=<name_of_the_secured_cluster> \
    --set centralEndpoint=<endpoint_of_central_service> 2

1: Use the -f option to specify the path for the init bundle.
2: Specify the address and port number for Central. For example, acs.domain.com:443.

Run the following command on OpenShift Container Platform clusters:

$ helm install -n stackrox --create-namespace \
    stackrox-secured-cluster-services rhacs/secured-cluster-services \
    -f <path_to_cluster_init_bundle.yaml> \ 1
    --set clusterName=<name_of_the_secured_cluster> \
    --set centralEndpoint=<endpoint_of_central_service> 2
    --set scanner.disable=false

1: Use the -f option to specify the path for the init bundle.
2: Specify the address and port number for Central. For example, acs.domain.com:443.

Additional resources

Generating and applying an init bundle for RHACS on other platforms

4.5.1.2. Configuring the secured-cluster-services Helm chart with customizations

Create the following files for configuring the Helm chart for installing Red Hat Advanced Cluster Security for Kubernetes:

Public configuration file values-public.yaml: Use this file to save all non-sensitive configuration options.
Private configuration file values-private.yaml: Use this file to save all sensitive configuration options. Ensure that you store this file securely.

Important

While using the secured-cluster-services Helm chart, do not modify the values.yaml file that is part of the chart.

4.5.1.2.1. Configuration parameters

Parameter	Description
`clusterName`	Name of your cluster.
`centralEndpoint`	Address, including port number, of the Central endpoint. If you are using a non-gRPC capable load balancer, use the WebSocket protocol by prefixing the endpoint address with `wss://`. When configuring multiple clusters, use the hostname for the address (for example, `central.example.com:443`).
`sensor.endpoint`	Address of the Sensor endpoint including port number.
`sensor.imagePullPolicy`	Image pull policy for the Sensor container.
`sensor.serviceTLS.cert`	The internal service-to-service TLS certificate that Sensor uses.
`sensor.serviceTLS.key`	The internal service-to-service TLS certificate key that Sensor uses.
`sensor.resources.requests.memory`	The memory request for the Sensor container. Use this parameter to override the default value.
`sensor.resources.requests.cpu`	The CPU request for the Sensor container. Use this parameter to override the default value.
`sensor.resources.limits.memory`	The memory limit for the Sensor container. Use this parameter to override the default value.
`sensor.resources.limits.cpu`	The CPU limit for the Sensor container. Use this parameter to override the default value.
`sensor.nodeSelector`	Specify a node selector label as `label-key: label-value` to force Sensor to only schedule on nodes with the specified label.
`sensor.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Sensor. This parameter is mainly used for infrastructure nodes.
`image.main.name`	The name of the `main` image.
`image.collector.name`	The name of the Collector image.
`image.main.registry`	Address of the registry you are using for the main image.
`image.collector.registry`	Address of the registry you are using for the Collector image.
`image.main.pullPolicy`	Image pull policy for `main` images.
`image.collector.pullPolicy`	Image pull policy for the Collector images.
`image.main.tag`	Tag of `main` image to use.
`image.collector.tag`	Tag of `collector` image to use.
`collector.collectionMethod`	Either `EBPF`, `KERNEL_MODULE`, or `NO_COLLECTION`.
`collector.imagePullPolicy`	Image pull policy for the Collector container.
`collector.complianceImagePullPolicy`	Image pull policy for the Compliance container.
`collector.disableTaintTolerations`	If you specify `false`, tolerations are applied to Collector, and the collector pods can schedule onto all nodes with taints. If you specify it as `true`, no tolerations are applied, and the collector pods are not scheduled onto nodes with taints.
`collector.resources.requests.memory`	The memory request for the Collector container. Use this parameter to override the default value.
`collector.resources.requests.cpu`	The CPU request for the Collector container. Use this parameter to override the default value.
`collector.resources.limits.memory`	The memory limit for the Collector container. Use this parameter to override the default value.
`collector.resources.limits.cpu`	The CPU limit for the Collector container. Use this parameter to override the default value.
`collector.complianceResources.requests.memory`	The memory request for the Compliance container. Use this parameter to override the default value.
`collector.complianceResources.requests.cpu`	The CPU request for the Compliance container. Use this parameter to override the default value.
`collector.complianceResources.limits.memory`	The memory limit for the Compliance container. Use this parameter to override the default value.
`collector.complianceResources.limits.cpu`	The CPU limit for the Compliance container. Use this parameter to override the default value.
`collector.serviceTLS.cert`	The internal service-to-service TLS certificate that Collector uses.
`collector.serviceTLS.key`	The internal service-to-service TLS certificate key that Collector uses.
`admissionControl.listenOnCreates`	This setting controls whether Kubernetes is configured to contact Red Hat Advanced Cluster Security for Kubernetes with `AdmissionReview` requests for workload creation events.
`admissionControl.listenOnUpdates`	When you set this parameter as `false`, Red Hat Advanced Cluster Security for Kubernetes creates the `ValidatingWebhookConfiguration` in a way that causes the Kubernetes API server not to send object update events. Since the volume of object updates is usually higher than the object creates, leaving this as `false` limits the load on the admission control service and decreases the chances of a malfunctioning admission control service.
`admissionControl.listenOnEvents`	This setting controls whether the cluster is configured to contact Red Hat Advanced Cluster Security for Kubernetes with `AdmissionReview` requests for Kubernetes `exec` and `portforward` events. Red Hat Advanced Cluster Security for Kubernetes does not support this feature on OpenShift Container Platform 3.11.
`admissionControl.dynamic.enforceOnCreates`	This setting controls whether Red Hat Advanced Cluster Security for Kubernetes evaluates policies; if it is disabled, all AdmissionReview requests are automatically accepted.
`admissionControl.dynamic.enforceOnUpdates`	This setting controls the behavior of the admission control service. You must specify `listenOnUpdates` as `true` for this to work.
`admissionControl.dynamic.scanInline`	If you set this option to `true`, the admission control service requests an image scan before making an admission decision. Since image scans take several seconds, enable this option only if you can ensure that all images used in your cluster are scanned before deployment (for example, by a CI integration during image build). This option corresponds to the Contact image scanners option in the RHACS Portal.
`admissionControl.dynamic.disableBypass`	Set it to `true` to disable bypassing the Admission controller.
`admissionControl.dynamic.timeout`	The maximum time, in seconds, Red Hat Advanced Cluster Security for Kubernetes should wait while evaluating admission review requests. Use this to set request timeouts when you enable image scanning. If the image scan runs longer than the specified time, Red Hat Advanced Cluster Security for Kubernetes accepts the request.
`admissionControl.resources.requests.memory`	The memory request for the Admission Control container. Use this parameter to override the default value.
`admissionControl.resources.requests.cpu`	The CPU request for the Admission Control container. Use this parameter to override the default value.
`admissionControl.resources.limits.memory`	The memory limit for the Admission Control container. Use this parameter to override the default value.
`admissionControl.resources.limits.cpu`	The CPU limit for the Admission Control container. Use this parameter to override the default value.
`admissionControl.nodeSelector`	Specify a node selector label as `label-key: label-value` to force Admission Control to only schedule on nodes with the specified label.
`admissionControl.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Admission Control. This parameter is mainly used for infrastructure nodes.
`admissionControl.serviceTLS.cert`	The internal service-to-service TLS certificate that Admission Control uses.
`admissionControl.serviceTLS.key`	The internal service-to-service TLS certificate key that Admission Control uses.
`registryOverride`	Use this parameter to override the default `docker.io` registry. Specify the name of your registry if you are using some other registry.
`collector.disableTaintTolerations`	If you specify `false`, tolerations are applied to Collector, and the Collector pods can schedule onto all nodes with taints. If you specify it as `true`, no tolerations are applied, and the Collector pods are not scheduled onto nodes with taints.
`createUpgraderServiceAccount`	Specify `true` to create the `sensor-upgrader` account. By default, Red Hat Advanced Cluster Security for Kubernetes creates a service account called `sensor-upgrader` in each secured cluster. This account is highly privileged but is only used during upgrades. If you do not create this account, you must complete future upgrades manually if the Sensor does not have enough permissions.
`createSecrets`	Specify `false` to skip the orchestrator secret creation for the Sensor, Collector, and Admission controller.
`collector.slimMode`	Specify `true` if you want to use a slim Collector image for deploying Collector. Using slim Collector images requires Central to provide the matching eBPF probe or kernel module. If you are running Red Hat Advanced Cluster Security for Kubernetes in offline mode, you must download a kernel support package from stackrox.io and upload it to Central for slim Collectors to function. Otherwise, you must ensure that Central can access the online probe repository hosted at https://collector-modules.stackrox.io/.
`sensor.resources`	Resource specification for Sensor.
`admissionControl.resources`	Resource specification for Admission controller.
`collector.resources`	Resource specification for Collector.
`collector.complianceResources`	Resource specification for Collector’s Compliance container.
`exposeMonitoring`	If you set this option to `true`, Red Hat Advanced Cluster Security for Kubernetes exposes Prometheus metrics endpoints on port number 9090 for the Sensor, Collector, and the Admission controller.
`auditLogs.disableCollection`	If you set this option to `true`, Red Hat Advanced Cluster Security for Kubernetes disables the audit log detection features used to detect access and modifications to configuration maps and secrets.
`scanner.disable`	If you set this option to `false`, Red Hat Advanced Cluster Security for Kubernetes deploys a lightweight scanner and Scanner DB in the secured cluster to allow scanning images on OpenShift Container Registry. Enabling Scanner is only supported on OpenShift. Defaults to `true`
`scanner.dbTolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner DB.
`scanner.replicas`	Resource specification for Collector’s Compliance container.
`scanner.logLevel`	Setting this parameter allows you to modify the scanner log level. Use this option only for troubleshooting purposes.
`scanner.autoscaling.disable`	If you set this option to `true`, Red Hat Advanced Cluster Security for Kubernetes disables autoscaling on the Scanner deployment.
`scanner.autoscaling.minReplicas`	The minimum number of replicas for autoscaling. Defaults to 2.
`scanner.autoscaling.maxReplicas`	The maximum number of replicas for autoscaling. Defaults to 5.
`scanner.nodeSelector`	Specify a node selector label as `label-key: label-value` to force Scanner to only schedule on nodes with the specified label.
`scanner.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner.
`scanner.dbNodeSelector`	Specify a node selector label as `label-key: label-value` to force Scanner DB to only schedule on nodes with the specified label.
`scanner.dbTolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner DB.
`scanner.resources.requests.memory`	The memory request for the Scanner container. Use this parameter to override the default value.
`scanner.resources.requests.cpu`	The CPU request for the Scanner container. Use this parameter to override the default value.
`scanner.resources.limits.memory`	The memory limit for the Scanner container. Use this parameter to override the default value.
`scanner.resources.limits.cpu`	The CPU limit for the Scanner container. Use this parameter to override the default value.
`scanner.dbResources.requests.memory`	The memory request for the Scanner DB container. Use this parameter to override the default value.
`scanner.dbResources.requests.cpu`	The CPU request for the Scanner DB container. Use this parameter to override the default value.
`scanner.dbResources.limits.memory`	The memory limit for the Scanner DB container. Use this parameter to override the default value.
`scanner.dbResources.limits.cpu`	The CPU limit for the Scanner DB container. Use this parameter to override the default value.

4.5.1.2.1.1. Environment variables

You can specify environment variables for Sensor and Admission controller in the following format:

customize:
  envVars:
    ENV_VAR1: "value1"
    ENV_VAR2: "value2"

4.5.1.2.2. Installing the secured-cluster-services Helm chart

Caution

Prerequisites

You must have generated RHACS init bundle for your cluster.
You must have the address and the port number that you are exposing the Central service on.

Procedure

Run the following command:

$ helm install -n stackrox --create-namespace \
  stackrox-secured-cluster-services rhacs/secured-cluster-services \
  -f <name_of_cluster_init_bundle.yaml> \
  -f <path_to_values_public.yaml> -f <path_to_values_private.yaml> 1

1: Use the -f option to specify the paths for your YAML configuration files.

Note

To deploy secured-cluster-services Helm chart by using a continuous integration (CI) system, pass the init bundle YAML file as an environment variable to the helm install command:

$ helm install ... -f <(echo "$INIT_BUNDLE_YAML_SECRET") 1

1: If you are using base64 encoded variables, use the helm install … -f <(echo "$INIT_BUNDLE_YAML_SECRET" | base64 --decode) command instead.

Additional resources

Generating and applying an init bundle for RHACS on other platforms

4.5.1.3. Changing configuration options after deploying the secured-cluster-services Helm chart

You can make changes to any configuration options after you have deployed the secured-cluster-services Helm chart.

Procedure

Update the values-public.yaml and values-private.yaml configuration files with new values.
Run the helm upgrade command and specify the configuration files using the -f option:
```
$ helm upgrade -n stackrox \
  stackrox-secured-cluster-services rhacs/secured-cluster-services \
  --reuse-values \ 1
  -f <path_to_values_public.yaml> \
  -f <path_to_values_private.yaml>
```
1
You must specify the --reuse-values parameter, otherwise the Helm upgrade command resets all previously configured settings.
Note
You can also specify configuration values using the --set or --set-file parameters. However, these options are not saved, and it requires you to manually specify all the options again whenever you make changes.

4.5.2. Installing RHACS on secured clusters by using the roxctl CLI

To install RHACS on secured clusters by using the CLI, perform the following steps:

Install the roxctl CLI
Install Sensor.

4.5.2.1. Installing the roxctl CLI

You must first download the binary. You can install roxctl on Linux, Windows, or macOS.

4.5.2.1.1. Installing the roxctl CLI on Linux

You can install the roxctl CLI binary on Linux by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Linux/roxctl

Make the roxctl binary executable:
```
$ chmod +x roxctl
```
Place the roxctl binary in a directory that is on your PATH:
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

4.5.2.1.2. Installing the roxctl CLI on macOS

You can install the roxctl CLI binary on macOS by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Darwin/roxctl

Remove all extended attributes from the binary:
```
$ xattr -c roxctl
```
Make the roxctl binary executable:
```
$ chmod +x roxctl
```
Place the roxctl binary in a directory that is on your PATH:
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

4.5.2.1.3. Installing the roxctl CLI on Windows

You can install the roxctl CLI binary on Windows by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Windows/roxctl.exe

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

4.5.2.2. Installing Sensor

To monitor a cluster, you must deploy Sensor. You must deploy Sensor into each cluster that you want to monitor. The following steps describe adding Sensor by using the RHACS portal.

Prerequisites

You must have already installed Central services, or you can access Central services on Red Hat Advanced Cluster Security Cloud Service (ACSCS).

Procedure

On the RHACS portal, navigate to Platform Configuration → Clusters.
Select + New Cluster.
Specify a name for the cluster.
Provide appropriate values for the fields based on where you are deploying the Sensor.
- If you are deploying Sensor in the same cluster, accept the default values for all the fields.
- If you are deploying into a different cluster, replace central.stackrox.svc:443 with a load balancer, node port, or other address, including the port number, that is accessible from the other cluster.
- If you are using a non-gRPC capable load balancer, such as HAProxy, AWS Application Load Balancer (ALB), or AWS Elastic Load Balancing (ELB), use the WebSocket Secure (wss) protocol. To use wss:
  - Prefix the address with wss://.
  - Add the port number after the address, for example, wss://stackrox-central.example.com:443.
Click Next to continue with the Sensor setup.
Click Download YAML File and Keys to download the cluster bundle (zip archive).
Important
The cluster bundle zip archive includes unique configurations and keys for each cluster. Do not reuse the same files in another cluster.
From a system that has access to the monitored cluster, unzip and run the sensor script from the cluster bundle:
```
$ unzip -d sensor sensor-<cluster_name>.zip
```
```
$ ./sensor/sensor.sh
```
If you get a warning that you do not have the required permissions to deploy Sensor, follow the on-screen instructions, or contact your cluster administrator for assistance.

After Sensor is deployed, it contacts Central and provides cluster information.

Verification

Return to the RHACS portal and check if the deployment is successful. If successful, when viewing your list of clusters in Platform Configuration → Clusters, the cluster status displays a green checkmark and a Healthy status. If you do not see a green checkmark, use the following command to check for problems:
- On Kubernetes:
```
$ kubectl get pod -n stackrox -w
```
Click Finish to close the window.

4.6. Verifying installation of RHACS on other platforms

Provides steps to verify that RHACS is properly installed.

4.6.1. Verifying installation

After you complete the installation, run a few vulnerable applications and navigate to the RHACS portal to evaluate the results of security assessments and policy violations.

Note

To verify installation:

Find the address of the RHACS portal based on your exposure method:
1. For a load balancer:
```
$ kubectl get service central-loadbalancer -n stackrox
```
2. For port forward:
  1. Run the following command:
    $ kubectl port-forward svc/central 18443:443 -n stackrox
  2. Navigate to https://localhost:18443/.
Create a new namespace:
```
$ kubectl create namespace test
```

Start some applications with critical vulnerabilities:

$ kubectl run shell --labels=app=shellshock,team=test-team \
  --image=vulnerables/cve-2014-6271 -n test
$ kubectl run samba --labels=app=rce \
  --image=vulnerables/cve-2017-7494 -n test

Chapter 5. Setting up RHACS Cloud Service on Red Hat OpenShift

5.1. Setting up RHACS Cloud Service on Red Hat OpenShift

Red Hat Advanced Cluster Security Cloud Service (ACSCS) provides security services for your Kubernetes clusters, such as OpenShift Kubernetes Engine (OKE), Red Hat OpenShift Dedicated (OSD), Azure Red Hat OpenShift (ARO), and Red Hat OpenShift Service on Amazon Web Services (ROSA).

For information about configuring ACSCS for other platforms, such as Amazon Elastic Kubernetes Service (EKS), Google Kubernetes Engine (GKE), and Microsoft Azure Kubernetes Service (AKS), see Overview of installing RHACS Cloud Service on other platforms.

Prerequisites

Understand the installation platforms and methods.
Understand Red Hat Advanced Cluster Security for Kubernetes architecture.
Review the prerequisites.

To set up ACSCS:

In the Red Hat Hybrid Cloud Console, from the navigation menu, select Advanced Cluster Security → ACS Instances, and then select the instance that you want to connect to your secured clusters.
- In the Instance Details section, note the Central API Endpoint. You use this address when creating secured clusters.
Click Open ACS Console. You will need your Red Hat Single Sign-On (RH-SSO) credentials, or credentials for another identity provider if that has been configured.
In the ACS console, generate an init bundle.
Using a terminal window, log in to your OpenShift Container Platform cluster and apply the init bundle.
Using OpenShift Container Platform, install secured cluster resources on each of your secured clusters.

5.2. Prerequisites for RHACS Cloud Service on Red Hat OpenShift

You must complete prerequisites before installing Red Hat Advanced Cluster Security Cloud Service for Red Hat OpenShift on secured clusters.

5.2.1. General requirements

RHACS has some system requirements that must be met before installing.

Warning

You must not install Red Hat Advanced Cluster Security for Kubernetes on:

Amazon Elastic File System (Amazon EFS). Use the Amazon Elastic Block Store (Amazon EBS) with the default gp2 volume type instead.
Older CPUs that do not have the Streaming SIMD Extensions (SSE) 4.2 instruction set. For example, Intel processors older than Sandy Bridge and AMD processors older than Bulldozer. (These processors were released in 2011.)

To install Red Hat Advanced Cluster Security for Kubernetes, you must have:

OpenShift Container Platform version 4.5 or later
Cluster nodes with a supported operating system. For more information, see the Red Hat Advanced Cluster Security for Kubernetes Support Policy.
- Operating system: Amazon Linux, CentOS, Container-Optimized OS from Google, Red Hat Enterprise Linux CoreOS (RHCOS), Debian, Red Hat Enterprise Linux (RHEL), or Ubuntu.
- Processor and memory: 2 CPU cores and at least 3GiB of RAM.
  Note
  For deploying Central, use a machine type with four or more cores and apply scheduling policies to launch Central on such nodes.
- Architectures: AMD64 or ppc64le.
  Note
  You can only install RHACS Secured cluster services on {ibm-power}, {ibm-zsystems}, and {ibm-linuxone} clusters. Central is not supported at this time.
Persistent storage by using persistent volume claim (PVC).
Important
You must not use Ceph FS storage with Red Hat Advanced Cluster Security for Kubernetes. Red Hat recommends using RBD block mode PVCs for Red Hat Advanced Cluster Security for Kubernetes.
- Use Solid-State Drives (SSDs) for best performance. However, you can use another storage type if you do not have SSDs available.

To install using Helm charts:

You must have Helm command-line interface (CLI) v3.2 or newer, if you are installing or configuring Red Hat Advanced Cluster Security for Kubernetes using Helm charts. Use the helm version command to verify the version of Helm you have installed.
The Red Hat OpenShift CLI (oc).
You must have access to the Red Hat Container Registry. For information about downloading images from registry.redhat.io, see Red Hat Container Registry Authentication.

5.2.2. Prerequisites for installing Scanner

Memory and storage requirements

Scanner	CPU	Memory
Request	1.2 cores	2700 MiB
Limit	5 cores	8000 MiB

5.2.3. Prerequisites for installing Sensor

Memory and storage requirements

Sensor	CPU	Memory
Request	1 core	1 GiB
Limit	2 cores	4 GiB

5.2.4. Prerequisites for installing Admission controller

The Admission controller prevents users from creating workloads that violate policies you configure.

Memory and storage requirements

By default, the admission control service runs 3 replicas. The following table lists the request and limits for each replica.

Admission controller	CPU	Memory
Request	.05 cores	100 MiB
Limit	.5 cores	500 MiB

5.2.5. Prerequisites for installing Collector

Collector monitors runtime activity on each node in your secured clusters. It connects to Sensor to report this information.

Caution

Memory and storage requirements

Collector	CPU	Memory
Request	.05 cores	320 MiB
Limit	.75 cores	1 GiB

Note

5.3. Creating a RHACS Cloud instance on Red Hat OpenShift

Access Red Hat Advanced Cluster Security Cloud Service (ACSCS) by selecting an instance in the Red Hat Hybrid Cloud Console. An ACS instance contains the ACSCS management interface and services that Red Hat configures and manages for you. The management interface connects to your secured clusters, which contain the services that scan and collect information about vulnerabilities. One instance can connect to and monitor multiple clusters.

5.3.1. Creating an instance in the console

In the Red Hat Hybrid Cloud Console, create an ACS instance to connect to your secured clusters.

Procedure

To create an ACS instance:

Log in to the Red Hat Hybrid Cloud Console.
From the navigation menu, select Advanced Cluster Security → ACS Instances.
Select Create ACS instance and enter information into the displayed fields or select the appropriate option from the drop-down list:
- Name: Enter the name of your ACS instance. An ACS instance contains the RHACS Central component, also referred to as "Central," which includes the ACSCS management interface and services that are configured and managed by Red Hat. You manage your secured clusters that communicate with Central. You can connect multiple secured clusters to one instance.
- Cloud provider: The cloud provider where Central is located. Select AWS.
- Cloud region: The region for your cloud provider where Central is located. Select AWS.
- Availability zones: Use the default value.
Click Create instance.

Next step

Generate an init bundle by using the ACS Console.

5.4. Generating and applying an init bundle for RHACS Cloud Service on Red Hat OpenShift

Note

You must have the Admin user role to create an init bundle.

5.4.1. Generating an init bundle

5.4.1.1. Generating an init bundle by using the RHACS portal

You can create an init bundle containing secrets by using the RHACS portal, also called the ACS Console.

Note

You must have the Admin user role to create an init bundle.

Procedure

On the RHACS portal, navigate to Platform Configuration → Integrations.
Navigate to the Authentication Tokens section and click on Cluster Init Bundle.
Click Generate bundle.
Enter a name for the cluster init bundle and click Generate.
1. If you are installing using Helm charts, click Download Helm Values File to download the generated bundle.
2. If you are installing using the Operator, click Download Kubernetes Secret File to download the generated bundle.

Important

Store this bundle securely because it contains secrets. You can use the same bundle to create multiple secured clusters.

Next steps

Apply the init bundle by creating a resource on the secured cluster.
Install secured cluster services on each cluster.

5.4.1.2. Generating an init bundle by using the roxctl CLI

You can create an init bundle with secrets by using the roxctl CLI.

Note

You must have the Admin user role to create init bundles.

Prerequisites

You have configured the ROX_API_TOKEN and the ROX_CENTRAL_ADDRESS environment variables.

Set the ROX_API_TOKEN and the ROX_CENTRAL_ADDRESS environment variables:

$ export ROX_API_TOKEN=<api_token>

$ export ROX_CENTRAL_ADDRESS=<address>:<port_number>

Procedure

Run the following command to generate a cluster init bundle containing secrets:

For Helm installations:

$ roxctl -e "$ROX_CENTRAL_ADDRESS" \
  central init-bundles generate <cluster_init_bundle_name> \
  --output cluster_init_bundle.yaml

For Operator installations:

$ roxctl -e "$ROX_CENTRAL_ADDRESS" \
  central init-bundles generate <cluster_init_bundle_name> \
  --output-secrets cluster_init_bundle.yaml

Important

Ensure that you store this bundle securely because it contains secrets. You can use the same bundle to set up multiple secured clusters.

Next Step

Use the Red Hat OpenShift CLI to create resources using the init bundle.

5.4.2. Applying an init bundle by creating a resource

5.4.2.1. Creating resources by using the init bundle

Before you install secured clusters, you must use the init bundle to create the required resources on the cluster that will allow the services on the secured clusters to communicate with Central.

Note

If you are installing by using Helm charts, do not perform this step.

Prerequisites

You must have generated an init bundle containing secrets.

Procedure

Using the Red Hat OpenShift CLI, run the following command to create the resources:
```
$ oc create -f <init_bundle>.yaml \ 1
  -n <stackrox> 2
```
1
Specify the file name of the init bundle containing the secrets.
2
Specify the name of the project where Central services are installed.
Using the kubectl CLI, run the following commands to create the resources:
```
$ kubectl create namespace stackrox
$ kubectl create -f <init_bundle>.yaml \ 1
  -n <stackrox> 2
```
1
Specify the file name of the init bundle containing the secrets.
2
Specify the name of the project where secured cluster services will be installed.

Next Step

Install RHACS secured cluster services in all clusters that you want to monitor.

5.5. Installing secured cluster resources for RHACS Cloud Service on Red Hat OpenShift

You can install ACSCS on your secured clusters by using the Operator.

Ensure that you have performed the following steps:

Created your OpenShift Container Platform cluster and installed the Operator on it.
In the ACS Console in ACSCS, you have created and downloaded the init bundle.
You applied the init bundle by using the oc create command.
During installation, you noted the Central API Endpoint, including the address and the port number. You can view this information by choosing Advanced Cluster Security → ACS Instances from the cloud console navigation menu, and then clicking the ACS instance you created.

You can install RHACS on your secured clusters by using one of the following methods:

By using the Operator
By using Helm charts
By using the roxctl CLI (do not use this method unless you have a specific installation need that requires using it)

5.5.1. Installing RHACS on secured clusters by using the Operator

5.5.1.1. Installing secured cluster services

Caution

Prerequisites

If you are using OpenShift Container Platform, you must install version 4.6 or later.
You have installed the RHACS Operator.
You have generated an init bundle and applied it to the cluster.

Procedure

On the OpenShift Container Platform web console, navigate to the Operators → Installed Operators page.
Click the RHACS Operator.
Click Secured Cluster from the central navigation menu in the Operator details page.
Click Create SecuredCluster.
Select one of the following options in the Configure via field:
- Form view: Use this option if you want to use the on-screen fields to configure the secured cluster and do not need to change any other fields.
- YAML view: Use this view to set up the secured cluster using the YAML file. The YAML file is displayed in the window and you can edit fields in it. If you select this option, when you are finished editing the file, click Create.
If you are using Form view, enter the new project name by accepting or editing the default name. The default value is stackrox-secured-cluster-services.
Optional: Add any labels for the cluster.
Enter a unique name for your SecuredCluster custom resource.
For Central Endpoint, enter the address and port number of your Central instance. For example, if Central is available at https://central.example.com, then specify the central endpoint as central.example.com:443. The default value of central.stackrox.svc:443 only works when you install secured cluster services and Central in the same cluster. Do not use the default value when you are configuring multiple clusters. Instead, use the hostname when configuring the Central Endpoint value for each cluster.
- For ACSCS use the Central API Endpoint, including the address and the port number. You can view this information by choosing Advanced Cluster Security → ACS Instances from the cloud console navigation menu, then clicking the ACS instance you created.
- Only if you are installing secured cluster services and Central in the same cluster, use central.stackrox.svc:443.
Accept the default values or configure custom values if needed. For example, you may need to configure TLS if you are using custom certificates or untrusted CAs.
Click Create.

Next step

Optional: Configure additional secured cluster settings.
Verify installation.

5.5.2. Installing ACSCS on secured clusters by using Helm charts

You can install RHACS on secured clusters by using Helm charts with no customization, using the default values, or with customizations of configuration parameters.

First, ensure that you add the Helm chart repository.

5.5.2.1. Adding the Helm chart repository

Procedure

Add the RHACS charts repository.

$ helm repo add rhacs https://mirror.openshift.com/pub/rhacs/charts/

The Helm repository for Red Hat Advanced Cluster Security for Kubernetes includes Helm charts for installing different components, including:

Secured Cluster Services Helm chart (secured-cluster-services) for installing the per-cluster (Sensor and Admission controller) and per-node (Collector) components.
Note
Deploy the per-cluster components into each cluster that you want to monitor and deploy the per-node components in all nodes that you want to monitor.

Verification

Run the following command to verify the added chart repository:
```
$ helm search repo -l rhacs/
```

5.5.2.2. Installing ACSCS on secured clusters by using Helm charts without customizations

5.5.2.2.1. Installing the secured-cluster-services Helm chart without customization

Use the following instructions to install the secured-cluster-services Helm chart to deploy the per-cluster and per-node components (Sensor, Admission controller, and Collector).

Caution

Prerequisites

You must have generated RHACS init bundle for your cluster.
You must have the Central API Endpoint, including the address and the port number. You can view this information by choosing Advanced Cluster Security → ACS Instances from the cloud console navigation menu, then clicking the ACS instance you created.

Procedure

Run the following command on your Kubernetes based clusters:

$ helm install -n stackrox --create-namespace \
    stackrox-secured-cluster-services rhacs/secured-cluster-services \
    -f <path_to_cluster_init_bundle.yaml> \ 1
    --set clusterName=<name_of_the_secured_cluster> \
    --set centralEndpoint=<endpoint_of_central_service> 2
--set imagePullSecrets.username=<your redhat.com username> \
--set imagePullSecrets.password=<your redhat.com password>

1: Use the -f option to specify the path for the init bundle.
2: Enter the Central API Endpoint, including the address and the port number. You can view this information again in the Red Hat Hybrid Cloud Console console by choosing Advanced Cluster Security → ACS Instances, and then clicking the ACS instance you created.

Additional resources

Generating and applying an init bundle for RHACS Cloud Service on Red Hat OpenShift

5.5.2.3. Configuring the secured-cluster-services Helm chart with customizations

You can use Helm chart configuration parameters with the helm install and helm upgrade commands. Specify these parameters by using the --set option or by creating YAML configuration files.

Create the following files for configuring the Helm chart for installing Red Hat Advanced Cluster Security for Kubernetes:

Public configuration file values-public.yaml: Use this file to save all non-sensitive configuration options.
Private configuration file values-private.yaml: Use this file to save all sensitive configuration options. Ensure that you store this file securely.

Important

When using the secured-cluster-services Helm chart, do not change the values.yaml file that is part of the chart.

5.5.2.3.1. Configuration parameters

Parameter	Description
`clusterName`	Name of your cluster.
`centralEndpoint`	Address, including port number, of the Central endpoint. If you are using a non-gRPC capable load balancer, use the WebSocket protocol by prefixing the endpoint address with `wss://`. When configuring multiple clusters, use the hostname for the address (for example, `central.example.com:443`).
`sensor.endpoint`	Address of the Sensor endpoint including port number.
`sensor.imagePullPolicy`	Image pull policy for the Sensor container.
`sensor.serviceTLS.cert`	The internal service-to-service TLS certificate that Sensor uses.
`sensor.serviceTLS.key`	The internal service-to-service TLS certificate key that Sensor uses.
`sensor.resources.requests.memory`	The memory request for the Sensor container. Use this parameter to override the default value.
`sensor.resources.requests.cpu`	The CPU request for the Sensor container. Use this parameter to override the default value.
`sensor.resources.limits.memory`	The memory limit for the Sensor container. Use this parameter to override the default value.
`sensor.resources.limits.cpu`	The CPU limit for the Sensor container. Use this parameter to override the default value.
`sensor.nodeSelector`	Specify a node selector label as `label-key: label-value` to force Sensor to only schedule on nodes with the specified label.
`sensor.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Sensor. This parameter is mainly used for infrastructure nodes.
`image.main.name`	The name of the `main` image.
`image.collector.name`	The name of the Collector image.
`image.main.registry`	Address of the registry you are using for the main image.
`image.collector.registry`	Address of the registry you are using for the Collector image.
`image.main.pullPolicy`	Image pull policy for `main` images.
`image.collector.pullPolicy`	Image pull policy for the Collector images.
`image.main.tag`	Tag of `main` image to use.
`image.collector.tag`	Tag of `collector` image to use.
`collector.collectionMethod`	Either `EBPF`, `KERNEL_MODULE`, or `NO_COLLECTION`.
`collector.imagePullPolicy`	Image pull policy for the Collector container.
`collector.complianceImagePullPolicy`	Image pull policy for the Compliance container.
`collector.disableTaintTolerations`	If you specify `false`, tolerations are applied to Collector, and the collector pods can schedule onto all nodes with taints. If you specify it as `true`, no tolerations are applied, and the collector pods are not scheduled onto nodes with taints.
`collector.resources.requests.memory`	The memory request for the Collector container. Use this parameter to override the default value.
`collector.resources.requests.cpu`	The CPU request for the Collector container. Use this parameter to override the default value.
`collector.resources.limits.memory`	The memory limit for the Collector container. Use this parameter to override the default value.
`collector.resources.limits.cpu`	The CPU limit for the Collector container. Use this parameter to override the default value.
`collector.complianceResources.requests.memory`	The memory request for the Compliance container. Use this parameter to override the default value.
`collector.complianceResources.requests.cpu`	The CPU request for the Compliance container. Use this parameter to override the default value.
`collector.complianceResources.limits.memory`	The memory limit for the Compliance container. Use this parameter to override the default value.
`collector.complianceResources.limits.cpu`	The CPU limit for the Compliance container. Use this parameter to override the default value.
`collector.serviceTLS.cert`	The internal service-to-service TLS certificate that Collector uses.
`collector.serviceTLS.key`	The internal service-to-service TLS certificate key that Collector uses.
`admissionControl.listenOnCreates`	This setting controls whether Kubernetes is configured to contact Red Hat Advanced Cluster Security for Kubernetes with `AdmissionReview` requests for workload creation events.
`admissionControl.listenOnUpdates`	When you set this parameter as `false`, Red Hat Advanced Cluster Security for Kubernetes creates the `ValidatingWebhookConfiguration` in a way that causes the Kubernetes API server not to send object update events. Since the volume of object updates is usually higher than the object creates, leaving this as `false` limits the load on the admission control service and decreases the chances of a malfunctioning admission control service.
`admissionControl.listenOnEvents`	This setting controls whether the cluster is configured to contact Red Hat Advanced Cluster Security for Kubernetes with `AdmissionReview` requests for Kubernetes `exec` and `portforward` events. Red Hat Advanced Cluster Security for Kubernetes does not support this feature on OpenShift Container Platform 3.11.
`admissionControl.dynamic.enforceOnCreates`	This setting controls whether Red Hat Advanced Cluster Security for Kubernetes evaluates policies; if it is disabled, all AdmissionReview requests are automatically accepted.
`admissionControl.dynamic.enforceOnUpdates`	This setting controls the behavior of the admission control service. You must specify `listenOnUpdates` as `true` for this to work.
`admissionControl.dynamic.scanInline`	If you set this option to `true`, the admission control service requests an image scan before making an admission decision. Since image scans take several seconds, enable this option only if you can ensure that all images used in your cluster are scanned before deployment (for example, by a CI integration during image build). This option corresponds to the Contact image scanners option in the RHACS Portal.
`admissionControl.dynamic.disableBypass`	Set it to `true` to disable bypassing the Admission controller.
`admissionControl.dynamic.timeout`	The maximum time, in seconds, Red Hat Advanced Cluster Security for Kubernetes should wait while evaluating admission review requests. Use this to set request timeouts when you enable image scanning. If the image scan runs longer than the specified time, Red Hat Advanced Cluster Security for Kubernetes accepts the request.
`admissionControl.resources.requests.memory`	The memory request for the Admission Control container. Use this parameter to override the default value.
`admissionControl.resources.requests.cpu`	The CPU request for the Admission Control container. Use this parameter to override the default value.
`admissionControl.resources.limits.memory`	The memory limit for the Admission Control container. Use this parameter to override the default value.
`admissionControl.resources.limits.cpu`	The CPU limit for the Admission Control container. Use this parameter to override the default value.
`admissionControl.nodeSelector`	Specify a node selector label as `label-key: label-value` to force Admission Control to only schedule on nodes with the specified label.
`admissionControl.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Admission Control. This parameter is mainly used for infrastructure nodes.
`admissionControl.serviceTLS.cert`	The internal service-to-service TLS certificate that Admission Control uses.
`admissionControl.serviceTLS.key`	The internal service-to-service TLS certificate key that Admission Control uses.
`registryOverride`	Use this parameter to override the default `docker.io` registry. Specify the name of your registry if you are using some other registry.
`collector.disableTaintTolerations`	If you specify `false`, tolerations are applied to Collector, and the Collector pods can schedule onto all nodes with taints. If you specify it as `true`, no tolerations are applied, and the Collector pods are not scheduled onto nodes with taints.
`createUpgraderServiceAccount`	Specify `true` to create the `sensor-upgrader` account. By default, Red Hat Advanced Cluster Security for Kubernetes creates a service account called `sensor-upgrader` in each secured cluster. This account is highly privileged but is only used during upgrades. If you do not create this account, you must complete future upgrades manually if the Sensor does not have enough permissions.
`createSecrets`	Specify `false` to skip the orchestrator secret creation for the Sensor, Collector, and Admission controller.
`collector.slimMode`	Specify `true` if you want to use a slim Collector image for deploying Collector. Using slim Collector images requires Central to provide the matching eBPF probe or kernel module. If you are running Red Hat Advanced Cluster Security for Kubernetes in offline mode, you must download a kernel support package from stackrox.io and upload it to Central for slim Collectors to function. Otherwise, you must ensure that Central can access the online probe repository hosted at https://collector-modules.stackrox.io/.
`sensor.resources`	Resource specification for Sensor.
`admissionControl.resources`	Resource specification for Admission controller.
`collector.resources`	Resource specification for Collector.
`collector.complianceResources`	Resource specification for Collector’s Compliance container.
`exposeMonitoring`	If you set this option to `true`, Red Hat Advanced Cluster Security for Kubernetes exposes Prometheus metrics endpoints on port number 9090 for the Sensor, Collector, and the Admission controller.
`auditLogs.disableCollection`	If you set this option to `true`, Red Hat Advanced Cluster Security for Kubernetes disables the audit log detection features used to detect access and modifications to configuration maps and secrets.
`scanner.disable`	If you set this option to `false`, Red Hat Advanced Cluster Security for Kubernetes deploys a lightweight scanner and Scanner DB in the secured cluster to allow scanning images on OpenShift Container Registry. Enabling Scanner is only supported on OpenShift. Defaults to `true`
`scanner.dbTolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner DB.
`scanner.replicas`	Resource specification for Collector’s Compliance container.
`scanner.logLevel`	Setting this parameter allows you to modify the scanner log level. Use this option only for troubleshooting purposes.
`scanner.autoscaling.disable`	If you set this option to `true`, Red Hat Advanced Cluster Security for Kubernetes disables autoscaling on the Scanner deployment.
`scanner.autoscaling.minReplicas`	The minimum number of replicas for autoscaling. Defaults to 2.
`scanner.autoscaling.maxReplicas`	The maximum number of replicas for autoscaling. Defaults to 5.
`scanner.nodeSelector`	Specify a node selector label as `label-key: label-value` to force Scanner to only schedule on nodes with the specified label.
`scanner.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner.
`scanner.dbNodeSelector`	Specify a node selector label as `label-key: label-value` to force Scanner DB to only schedule on nodes with the specified label.
`scanner.dbTolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner DB.
`scanner.resources.requests.memory`	The memory request for the Scanner container. Use this parameter to override the default value.
`scanner.resources.requests.cpu`	The CPU request for the Scanner container. Use this parameter to override the default value.
`scanner.resources.limits.memory`	The memory limit for the Scanner container. Use this parameter to override the default value.
`scanner.resources.limits.cpu`	The CPU limit for the Scanner container. Use this parameter to override the default value.
`scanner.dbResources.requests.memory`	The memory request for the Scanner DB container. Use this parameter to override the default value.
`scanner.dbResources.requests.cpu`	The CPU request for the Scanner DB container. Use this parameter to override the default value.
`scanner.dbResources.limits.memory`	The memory limit for the Scanner DB container. Use this parameter to override the default value.
`scanner.dbResources.limits.cpu`	The CPU limit for the Scanner DB container. Use this parameter to override the default value.

5.5.2.3.1.1. Environment variables

You can specify environment variables for Sensor and Admission controller in the following format:

customize:
  envVars:
    ENV_VAR1: "value1"
    ENV_VAR2: "value2"

5.5.2.3.2. Installing the secured-cluster-services Helm chart

Caution

Prerequisites

You must have generated RHACS init bundle for your cluster.
You must have the Central API Endpoint, including the address and the port number. You can view this information by choosing Advanced Cluster Security → ACS Instances from the cloud console navigation menu, then clicking the ACS instance you created.

Procedure

Run the following command:

$ helm install -n stackrox --create-namespace \
  stackrox-secured-cluster-services rhacs/secured-cluster-services \
  -f <name_of_cluster_init_bundle.yaml> \
  -f <path_to_values_public.yaml> -f <path_to_values_private.yaml> 1

1: Use the -f option to specify the paths for your YAML configuration files.

Note

To deploy secured-cluster-services Helm chart by using a continuous integration (CI) system, pass the init bundle YAML file as an environment variable to the helm install command:

$ helm install ... -f <(echo "$INIT_BUNDLE_YAML_SECRET") 1

1: If you are using base64 encoded variables, use the helm install … -f <(echo "$INIT_BUNDLE_YAML_SECRET" | base64 --decode) command instead.

Additional resources

Generating and applying an init bundle for RHACS Cloud Service on Red Hat OpenShift

5.5.2.4. Changing configuration options after deploying the secured-cluster-services Helm chart

You can make changes to any configuration options after you have deployed the secured-cluster-services Helm chart.

Procedure

Update the values-public.yaml and values-private.yaml configuration files with new values.
Run the helm upgrade command and specify the configuration files using the -f option:
```
$ helm upgrade -n stackrox \
  stackrox-secured-cluster-services rhacs/secured-cluster-services \
  --reuse-values \ 1
  -f <path_to_values_public.yaml> \
  -f <path_to_values_private.yaml>
```
1
You must specify the --reuse-values parameter, otherwise the Helm upgrade command resets all previously configured settings.
Note
You can also specify configuration values using the --set or --set-file parameters. However, these options are not saved, and it requires you to manually specify all the options again whenever you make changes.

5.5.3. Installing RHACS on secured clusters by using the roxctl CLI

To install RHACS on secured clusters by using the CLI, perform the following steps:

Install the roxctl CLI.
Install Sensor.

5.5.3.1. Installing the roxctl CLI

You must first download the binary. You can install roxctl on Linux, Windows, or macOS.

5.5.3.1.1. Installing the roxctl CLI on Linux

You can install the roxctl CLI binary on Linux by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Linux/roxctl

Make the roxctl binary executable:
```
$ chmod +x roxctl
```
Place the roxctl binary in a directory that is on your PATH:
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

5.5.3.1.2. Installing the roxctl CLI on macOS

You can install the roxctl CLI binary on macOS by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Darwin/roxctl

Remove all extended attributes from the binary:
```
$ xattr -c roxctl
```
Make the roxctl binary executable:
```
$ chmod +x roxctl
```
Place the roxctl binary in a directory that is on your PATH:
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

5.5.3.1.3. Installing the roxctl CLI on Windows

You can install the roxctl CLI binary on Windows by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Windows/roxctl.exe

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

5.5.3.2. Installing Sensor

To monitor a cluster, you must deploy Sensor. You must deploy Sensor into each cluster that you want to monitor. The following steps describe adding Sensor by using the RHACS portal.

Prerequisites

You must have already installed Central services, or you can access Central services on Red Hat Advanced Cluster Security Cloud Service (ACSCS).

Procedure

On the RHACS portal, navigate to Platform Configuration → Clusters.
Select + New Cluster.
Specify a name for the cluster.
Provide appropriate values for the fields based on where you are deploying the Sensor.
- Enter the Central API Endpoint, including the address and the port number. You can view this information again in the Red Hat Hybrid Cloud Console by choosing Advanced Cluster Security → ACS Instances, and then clicking the ACS instance you created.
Click Next to continue with the Sensor setup.
Click Download YAML File and Keys to download the cluster bundle (zip archive).
Important
The cluster bundle zip archive includes unique configurations and keys for each cluster. Do not reuse the same files in another cluster.
From a system that has access to the monitored cluster, unzip and run the sensor script from the cluster bundle:
```
$ unzip -d sensor sensor-<cluster_name>.zip
```
```
$ ./sensor/sensor.sh
```
If you get a warning that you do not have the required permissions to deploy Sensor, follow the on-screen instructions, or contact your cluster administrator for assistance.

After Sensor is deployed, it contacts Central and provides cluster information.

Verification

Return to the RHACS portal and check if the deployment is successful. If successful, when viewing your list of clusters in Platform Configuration → Clusters, the cluster status displays a green checkmark and a Healthy status. If you do not see a green checkmark, use the following command to check for problems:
- On Kubernetes:
```
$ kubectl get pod -n stackrox -w
```
Click Finish to close the window.

5.6. Verifying installation of RHACS Cloud Service on Red Hat OpenShift

After installing ACSCS, you can perform some steps to verify that the installation was successful.

To verify installation, access your ACS Console from the Red Hat Hybrid Cloud Console. The Dashboard will display the number of clusters that ACSCS is monitoring, along with information about nodes, deployments, images, and violations.

If no data appears in the ACS Console:

Ensure that at least one secured cluster is connected to your ACSCS instance. For more information, see the "Installing secured cluster resources on each cluster" section.
Examine your Sensor pod logs to ensure that the connection to your ACSCS instance is successful.
In the OCP cluster, navigate to Platform Configuration → Clusters to verify that the components are healthy and view additional operational information.
Examine the values in the SecuredCluster API in the Operator on your local cluster to ensure that the Central API Endpoint has been entered correctly. This value should be the same value as shown in the ACS instance details in the Red Hat Hybrid Cloud Console.

Chapter 6. Setting up RHACS Cloud Service on other platforms

6.1. Setting up RHACS Cloud Service on other platforms

Red Hat Advanced Cluster Security Cloud Service (ACSCS) provides security services for your Kubernetes clusters. You can install ACSCS on Kubernetes systems with secured clusters on managed platforms such as Amazon Elastic Kubernetes Service (EKS), Google Kubernetes Engine (GKE), and Microsoft Azure Kubernetes Service (AKS).

Prerequisites

Understand the installation platforms and methods.
Understand Red Hat Advanced Cluster Security for Kubernetes architecture.
Review the prerequisites.

To set up ACSCS on other platforms:

In the Red Hat Hybrid Cloud Console, from the navigation menu, select Advanced Cluster Security → ACS Instances and select the instance that you want to connect to your secured clusters.
- In the Instance Details section, note the Central API Endpoint. You use this address when creating secured clusters.
Click Open ACS Console. You need your Red Hat Single Sign-On (RH-SSO) credentials, or credentials for another identity provider if that has been configured.
In the ACS console, generate an init bundle.
Using a terminal window, log in to your cluster and apply the init bundle.
Install secured cluster resources on each of your secured clusters.

6.2. Prerequisites for RHACS Cloud Service on other platforms

You must complete prerequisites before installing Red Hat Advanced Cluster Security Cloud Service for supported Kubernetes platforms.

6.2.1. General requirements

RHACS has some system requirements that must be met before installing.

Warning

You must not install Red Hat Advanced Cluster Security for Kubernetes on:

Amazon Elastic File System (Amazon EFS). Use the Amazon Elastic Block Store (Amazon EBS) with the default gp2 volume type instead.
Older CPUs that do not have the Streaming SIMD Extensions (SSE) 4.2 instruction set. For example, Intel processors older than Sandy Bridge and AMD processors older than Bulldozer. (These processors were released in 2011.)

To install Red Hat Advanced Cluster Security for Kubernetes, you must have:

OpenShift Container Platform version 4.5 or later
Cluster nodes with a supported operating system. For more information, see the Red Hat Advanced Cluster Security for Kubernetes Support Policy.
- Operating system: Amazon Linux, CentOS, Container-Optimized OS from Google, Red Hat Enterprise Linux CoreOS (RHCOS), Debian, Red Hat Enterprise Linux (RHEL), or Ubuntu.
- Processor and memory: 2 CPU cores and at least 3GiB of RAM.
  Note
  For deploying Central, use a machine type with four or more cores and apply scheduling policies to launch Central on such nodes.
- Architectures: AMD64 or ppc64le.
  Note
  You can only install RHACS Secured cluster services on {ibm-power}, {ibm-zsystems}, and {ibm-linuxone} clusters. Central is not supported at this time.
Persistent storage by using persistent volume claim (PVC).
Important
You must not use Ceph FS storage with Red Hat Advanced Cluster Security for Kubernetes. Red Hat recommends using RBD block mode PVCs for Red Hat Advanced Cluster Security for Kubernetes.
- Use Solid-State Drives (SSDs) for best performance. However, you can use another storage type if you do not have SSDs available.

To install using Helm charts:

You must have Helm command-line interface (CLI) v3.2 or newer, if you are installing or configuring Red Hat Advanced Cluster Security for Kubernetes using Helm charts. Use the helm version command to verify the version of Helm you have installed.
The Red Hat OpenShift CLI (oc).
You must have access to the Red Hat Container Registry. For information about downloading images from registry.redhat.io, see Red Hat Container Registry Authentication.

6.2.2. Prerequisites for installing Scanner

Memory and storage requirements

Scanner	CPU	Memory
Request	1.2 cores	2700 MiB
Limit	5 cores	8000 MiB

6.2.3. Prerequisites for installing Sensor

Memory and storage requirements

Sensor	CPU	Memory
Request	1 core	1 GiB
Limit	2 cores	4 GiB

6.2.4. Prerequisites for installing Admission controller

The Admission controller prevents users from creating workloads that violate policies you configure.

Memory and storage requirements

By default, the admission control service runs 3 replicas. The following table lists the request and limits for each replica.

Admission controller	CPU	Memory
Request	.05 cores	100 MiB
Limit	.5 cores	500 MiB

6.2.5. Prerequisites for installing Collector

Collector monitors runtime activity on each node in your secured clusters. It connects to Sensor to report this information.

Caution

Memory and storage requirements

Collector	CPU	Memory
Request	.05 cores	320 MiB
Limit	.75 cores	1 GiB

Note

6.3. Creating an RHACS Cloud instance on other platforms

6.3.1. Creating an instance in the console

In the Red Hat Hybrid Cloud Console, create an ACS instance to connect to your secured clusters.

Procedure

To create an ACS instance:

Log in to the Red Hat Hybrid Cloud Console.
From the navigation menu, select Advanced Cluster Security → ACS Instances.
Select Create ACS instance and enter information into the displayed fields or select the appropriate option from the drop-down list:
- Name: Enter the name of your ACS instance. An ACS instance contains the RHACS Central component, also referred to as "Central," which includes the ACSCS management interface and services that are configured and managed by Red Hat. You manage your secured clusters that communicate with Central. You can connect multiple secured clusters to one instance.
- Cloud provider: The cloud provider where Central is located. Select AWS.
- Cloud region: The region for your cloud provider where Central is located. Select AWS.
- Availability zones: Use the default value.
Click Create instance.

Next step

Generate an init bundle by using the ACS Console.

6.4. Generating and applying an init bundle for RHACS Cloud Service on other platforms

Note

You must have the Admin user role to create an init bundle.

6.4.1. Generating an init bundle

6.4.1.1. Generating an init bundle by using the RHACS portal

You can create an init bundle containing secrets by using the RHACS portal, also called the ACS Console.

Note

You must have the Admin user role to create an init bundle.

Procedure

On the RHACS portal, navigate to Platform Configuration → Integrations.
Navigate to the Authentication Tokens section and click on Cluster Init Bundle.
Click Generate bundle.
Enter a name for the cluster init bundle and click Generate.
1. If you are installing using Helm charts, click Download Helm Values File to download the generated bundle.
2. If you are installing using the Operator, click Download Kubernetes Secret File to download the generated bundle.

Important

Store this bundle securely because it contains secrets. You can use the same bundle to create multiple secured clusters.

Next steps

Apply the init bundle by creating a resource on the secured cluster.
Install secured cluster services on each cluster.

6.4.1.2. Generating an init bundle by using the roxctl CLI

You can create an init bundle with secrets by using the roxctl CLI.

Note

You must have the Admin user role to create init bundles.

Prerequisites

You have configured the ROX_API_TOKEN and the ROX_CENTRAL_ADDRESS environment variables.

Set the ROX_API_TOKEN and the ROX_CENTRAL_ADDRESS environment variables:

$ export ROX_API_TOKEN=<api_token>

$ export ROX_CENTRAL_ADDRESS=<address>:<port_number>

Procedure

Run the following command to generate a cluster init bundle containing secrets:

For Helm installations:

$ roxctl -e "$ROX_CENTRAL_ADDRESS" \
  central init-bundles generate <cluster_init_bundle_name> \
  --output cluster_init_bundle.yaml

For Operator installations:

$ roxctl -e "$ROX_CENTRAL_ADDRESS" \
  central init-bundles generate <cluster_init_bundle_name> \
  --output-secrets cluster_init_bundle.yaml

Important

Ensure that you store this bundle securely because it contains secrets. You can use the same bundle to set up multiple secured clusters.

Next Step

Use the Red Hat OpenShift CLI to create resources using the init bundle.
Use the kubectl CLI to create resources using the init bundle.

6.4.2. Applying an init bundle by creating a resource

6.4.2.1. Creating resources by using the init bundle

Before you install secured clusters, you must use the init bundle to create the required resources on the cluster that will allow the services on the secured clusters to communicate with Central.

Note

If you are installing by using Helm charts, do not perform this step.

Prerequisites

You must have generated an init bundle containing secrets.

Procedure

Using the Red Hat OpenShift CLI, run the following command to create the resources:
```
$ oc create -f <init_bundle>.yaml \ 1
  -n <stackrox> 2
```
1
Specify the file name of the init bundle containing the secrets.
2
Specify the name of the project where Central services are installed.
Using the kubectl CLI, run the following commands to create the resources:
```
$ kubectl create namespace stackrox
$ kubectl create -f <init_bundle>.yaml \ 1
  -n <stackrox> 2
```
1
Specify the file name of the init bundle containing the secrets.
2
Specify the name of the project where secured cluster services will be installed.

Next Step

Install RHACS secured cluster services in all clusters that you want to monitor.

6.5. Installing secured cluster services for RHACS Cloud Service on other platforms

You can install ACSCS on your secured clusters by using one of the following methods:

By using Helm charts
By using the roxctl CLI (do not use this method unless you have a specific installation need that requires using it)

6.5.1. Installing ACSCS on secured clusters by using Helm charts

You can install RHACS on secured clusters by using Helm charts with no customization, by using Helm charts with the default values, or by using Helm charts with customizations of configuration parameters.

First, ensure that you add the Helm chart repository.

6.5.1.1. Adding the Helm chart repository

Procedure

Add the RHACS charts repository.

$ helm repo add rhacs https://mirror.openshift.com/pub/rhacs/charts/

The Helm repository for Red Hat Advanced Cluster Security for Kubernetes includes Helm charts for installing different components, including:

Secured Cluster Services Helm chart (secured-cluster-services) for installing the per-cluster (Sensor and Admission controller) and per-node (Collector) components.
Note
Deploy the per-cluster components into each cluster that you want to monitor and deploy the per-node components in all nodes that you want to monitor.

Verification

Run the following command to verify the added chart repository:
```
$ helm search repo -l rhacs/
```

6.5.1.2. Installing ACSCS on secured clusters by using Helm charts without customizations

6.5.1.2.1. Installing the secured-cluster-services Helm chart without customization

Use the following instructions to install the secured-cluster-services Helm chart to deploy the per-cluster and per-node components (Sensor, Admission controller, and Collector).

Caution

Prerequisites

You must have generated RHACS init bundle for your cluster.
You must have the Central API Endpoint, including the address and the port number. You can view this information by choosing Advanced Cluster Security → ACS Instances from the cloud console navigation menu, then clicking the ACS instance you created.

Procedure

Run the following command on your Kubernetes based clusters:

$ helm install -n stackrox --create-namespace \
    stackrox-secured-cluster-services rhacs/secured-cluster-services \
    -f <path_to_cluster_init_bundle.yaml> \ 1
    --set clusterName=<name_of_the_secured_cluster> \
    --set centralEndpoint=<endpoint_of_central_service> 2
--set imagePullSecrets.username=<your redhat.com username> \
--set imagePullSecrets.password=<your redhat.com password>

1: Use the -f option to specify the path for the init bundle.
2: Enter the Central API Endpoint, including the address and the port number. You can view this information again in the Red Hat Hybrid Cloud Console console by choosing Advanced Cluster Security → ACS Instances, and then clicking the ACS instance you created.

Additional resources

Generating and applying an init bundle for RHACS Cloud Service on other platforms

6.5.1.3. Configuring the secured-cluster-services Helm chart with customizations

Create the following files for configuring the Helm chart for installing Red Hat Advanced Cluster Security for Kubernetes:

Public configuration file values-public.yaml: Use this file to save all non-sensitive configuration options.
Private configuration file values-private.yaml: Use this file to save all sensitive configuration options. Ensure that you store this file securely.

Important

While using the secured-cluster-services Helm chart, do not modify the values.yaml file that is part of the chart.

6.5.1.3.1. Configuration parameters

Parameter	Description
`clusterName`	Name of your cluster.
`centralEndpoint`	Address, including port number, of the Central endpoint. If you are using a non-gRPC capable load balancer, use the WebSocket protocol by prefixing the endpoint address with `wss://`. When configuring multiple clusters, use the hostname for the address (for example, `central.example.com:443`).
`sensor.endpoint`	Address of the Sensor endpoint including port number.
`sensor.imagePullPolicy`	Image pull policy for the Sensor container.
`sensor.serviceTLS.cert`	The internal service-to-service TLS certificate that Sensor uses.
`sensor.serviceTLS.key`	The internal service-to-service TLS certificate key that Sensor uses.
`sensor.resources.requests.memory`	The memory request for the Sensor container. Use this parameter to override the default value.
`sensor.resources.requests.cpu`	The CPU request for the Sensor container. Use this parameter to override the default value.
`sensor.resources.limits.memory`	The memory limit for the Sensor container. Use this parameter to override the default value.
`sensor.resources.limits.cpu`	The CPU limit for the Sensor container. Use this parameter to override the default value.
`sensor.nodeSelector`	Specify a node selector label as `label-key: label-value` to force Sensor to only schedule on nodes with the specified label.
`sensor.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Sensor. This parameter is mainly used for infrastructure nodes.
`image.main.name`	The name of the `main` image.
`image.collector.name`	The name of the Collector image.
`image.main.registry`	Address of the registry you are using for the main image.
`image.collector.registry`	Address of the registry you are using for the Collector image.
`image.main.pullPolicy`	Image pull policy for `main` images.
`image.collector.pullPolicy`	Image pull policy for the Collector images.
`image.main.tag`	Tag of `main` image to use.
`image.collector.tag`	Tag of `collector` image to use.
`collector.collectionMethod`	Either `EBPF`, `KERNEL_MODULE`, or `NO_COLLECTION`.
`collector.imagePullPolicy`	Image pull policy for the Collector container.
`collector.complianceImagePullPolicy`	Image pull policy for the Compliance container.
`collector.disableTaintTolerations`	If you specify `false`, tolerations are applied to Collector, and the collector pods can schedule onto all nodes with taints. If you specify it as `true`, no tolerations are applied, and the collector pods are not scheduled onto nodes with taints.
`collector.resources.requests.memory`	The memory request for the Collector container. Use this parameter to override the default value.
`collector.resources.requests.cpu`	The CPU request for the Collector container. Use this parameter to override the default value.
`collector.resources.limits.memory`	The memory limit for the Collector container. Use this parameter to override the default value.
`collector.resources.limits.cpu`	The CPU limit for the Collector container. Use this parameter to override the default value.
`collector.complianceResources.requests.memory`	The memory request for the Compliance container. Use this parameter to override the default value.
`collector.complianceResources.requests.cpu`	The CPU request for the Compliance container. Use this parameter to override the default value.
`collector.complianceResources.limits.memory`	The memory limit for the Compliance container. Use this parameter to override the default value.
`collector.complianceResources.limits.cpu`	The CPU limit for the Compliance container. Use this parameter to override the default value.
`collector.serviceTLS.cert`	The internal service-to-service TLS certificate that Collector uses.
`collector.serviceTLS.key`	The internal service-to-service TLS certificate key that Collector uses.
`admissionControl.listenOnCreates`	This setting controls whether Kubernetes is configured to contact Red Hat Advanced Cluster Security for Kubernetes with `AdmissionReview` requests for workload creation events.
`admissionControl.listenOnUpdates`	When you set this parameter as `false`, Red Hat Advanced Cluster Security for Kubernetes creates the `ValidatingWebhookConfiguration` in a way that causes the Kubernetes API server not to send object update events. Since the volume of object updates is usually higher than the object creates, leaving this as `false` limits the load on the admission control service and decreases the chances of a malfunctioning admission control service.
`admissionControl.listenOnEvents`	This setting controls whether the cluster is configured to contact Red Hat Advanced Cluster Security for Kubernetes with `AdmissionReview` requests for Kubernetes `exec` and `portforward` events. Red Hat Advanced Cluster Security for Kubernetes does not support this feature on OpenShift Container Platform 3.11.
`admissionControl.dynamic.enforceOnCreates`	This setting controls whether Red Hat Advanced Cluster Security for Kubernetes evaluates policies; if it is disabled, all AdmissionReview requests are automatically accepted.
`admissionControl.dynamic.enforceOnUpdates`	This setting controls the behavior of the admission control service. You must specify `listenOnUpdates` as `true` for this to work.
`admissionControl.dynamic.scanInline`	If you set this option to `true`, the admission control service requests an image scan before making an admission decision. Since image scans take several seconds, enable this option only if you can ensure that all images used in your cluster are scanned before deployment (for example, by a CI integration during image build). This option corresponds to the Contact image scanners option in the RHACS Portal.
`admissionControl.dynamic.disableBypass`	Set it to `true` to disable bypassing the Admission controller.
`admissionControl.dynamic.timeout`	The maximum time, in seconds, Red Hat Advanced Cluster Security for Kubernetes should wait while evaluating admission review requests. Use this to set request timeouts when you enable image scanning. If the image scan runs longer than the specified time, Red Hat Advanced Cluster Security for Kubernetes accepts the request.
`admissionControl.resources.requests.memory`	The memory request for the Admission Control container. Use this parameter to override the default value.
`admissionControl.resources.requests.cpu`	The CPU request for the Admission Control container. Use this parameter to override the default value.
`admissionControl.resources.limits.memory`	The memory limit for the Admission Control container. Use this parameter to override the default value.
`admissionControl.resources.limits.cpu`	The CPU limit for the Admission Control container. Use this parameter to override the default value.
`admissionControl.nodeSelector`	Specify a node selector label as `label-key: label-value` to force Admission Control to only schedule on nodes with the specified label.
`admissionControl.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Admission Control. This parameter is mainly used for infrastructure nodes.
`admissionControl.serviceTLS.cert`	The internal service-to-service TLS certificate that Admission Control uses.
`admissionControl.serviceTLS.key`	The internal service-to-service TLS certificate key that Admission Control uses.
`registryOverride`	Use this parameter to override the default `docker.io` registry. Specify the name of your registry if you are using some other registry.
`collector.disableTaintTolerations`	If you specify `false`, tolerations are applied to Collector, and the Collector pods can schedule onto all nodes with taints. If you specify it as `true`, no tolerations are applied, and the Collector pods are not scheduled onto nodes with taints.
`createUpgraderServiceAccount`	Specify `true` to create the `sensor-upgrader` account. By default, Red Hat Advanced Cluster Security for Kubernetes creates a service account called `sensor-upgrader` in each secured cluster. This account is highly privileged but is only used during upgrades. If you do not create this account, you must complete future upgrades manually if the Sensor does not have enough permissions.
`createSecrets`	Specify `false` to skip the orchestrator secret creation for the Sensor, Collector, and Admission controller.
`collector.slimMode`	Specify `true` if you want to use a slim Collector image for deploying Collector. Using slim Collector images requires Central to provide the matching eBPF probe or kernel module. If you are running Red Hat Advanced Cluster Security for Kubernetes in offline mode, you must download a kernel support package from stackrox.io and upload it to Central for slim Collectors to function. Otherwise, you must ensure that Central can access the online probe repository hosted at https://collector-modules.stackrox.io/.
`sensor.resources`	Resource specification for Sensor.
`admissionControl.resources`	Resource specification for Admission controller.
`collector.resources`	Resource specification for Collector.
`collector.complianceResources`	Resource specification for Collector’s Compliance container.
`exposeMonitoring`	If you set this option to `true`, Red Hat Advanced Cluster Security for Kubernetes exposes Prometheus metrics endpoints on port number 9090 for the Sensor, Collector, and the Admission controller.
`auditLogs.disableCollection`	If you set this option to `true`, Red Hat Advanced Cluster Security for Kubernetes disables the audit log detection features used to detect access and modifications to configuration maps and secrets.
`scanner.disable`	If you set this option to `false`, Red Hat Advanced Cluster Security for Kubernetes deploys a lightweight scanner and Scanner DB in the secured cluster to allow scanning images on OpenShift Container Registry. Enabling Scanner is only supported on OpenShift. Defaults to `true`
`scanner.dbTolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner DB.
`scanner.replicas`	Resource specification for Collector’s Compliance container.
`scanner.logLevel`	Setting this parameter allows you to modify the scanner log level. Use this option only for troubleshooting purposes.
`scanner.autoscaling.disable`	If you set this option to `true`, Red Hat Advanced Cluster Security for Kubernetes disables autoscaling on the Scanner deployment.
`scanner.autoscaling.minReplicas`	The minimum number of replicas for autoscaling. Defaults to 2.
`scanner.autoscaling.maxReplicas`	The maximum number of replicas for autoscaling. Defaults to 5.
`scanner.nodeSelector`	Specify a node selector label as `label-key: label-value` to force Scanner to only schedule on nodes with the specified label.
`scanner.tolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner.
`scanner.dbNodeSelector`	Specify a node selector label as `label-key: label-value` to force Scanner DB to only schedule on nodes with the specified label.
`scanner.dbTolerations`	If the node selector selects tainted nodes, use this parameter to specify a taint toleration key, value, and effect for Scanner DB.
`scanner.resources.requests.memory`	The memory request for the Scanner container. Use this parameter to override the default value.
`scanner.resources.requests.cpu`	The CPU request for the Scanner container. Use this parameter to override the default value.
`scanner.resources.limits.memory`	The memory limit for the Scanner container. Use this parameter to override the default value.
`scanner.resources.limits.cpu`	The CPU limit for the Scanner container. Use this parameter to override the default value.
`scanner.dbResources.requests.memory`	The memory request for the Scanner DB container. Use this parameter to override the default value.
`scanner.dbResources.requests.cpu`	The CPU request for the Scanner DB container. Use this parameter to override the default value.
`scanner.dbResources.limits.memory`	The memory limit for the Scanner DB container. Use this parameter to override the default value.
`scanner.dbResources.limits.cpu`	The CPU limit for the Scanner DB container. Use this parameter to override the default value.

6.5.1.3.1.1. Environment variables

You can specify environment variables for Sensor and Admission controller in the following format:

customize:
  envVars:
    ENV_VAR1: "value1"
    ENV_VAR2: "value2"

6.5.1.3.2. Installing the secured-cluster-services Helm chart

Caution

Prerequisites

You must have generated RHACS init bundle for your cluster.
You must have the Central API Endpoint, including the address and the port number. You can view this information by choosing Advanced Cluster Security → ACS Instances from the cloud console navigation menu, then clicking the ACS instance you created.

Procedure

Run the following command:

$ helm install -n stackrox --create-namespace \
  stackrox-secured-cluster-services rhacs/secured-cluster-services \
  -f <name_of_cluster_init_bundle.yaml> \
  -f <path_to_values_public.yaml> -f <path_to_values_private.yaml> 1

1: Use the -f option to specify the paths for your YAML configuration files.

Note

To deploy secured-cluster-services Helm chart by using a continuous integration (CI) system, pass the init bundle YAML file as an environment variable to the helm install command:

$ helm install ... -f <(echo "$INIT_BUNDLE_YAML_SECRET") 1

1: If you are using base64 encoded variables, use the helm install … -f <(echo "$INIT_BUNDLE_YAML_SECRET" | base64 --decode) command instead.

Additional resources

Generating and applying an init bundle for RHACS Cloud Service on other platforms

6.5.1.4. Changing configuration options after deploying the secured-cluster-services Helm chart

You can make changes to any configuration options after you have deployed the secured-cluster-services Helm chart.

Procedure

Update the values-public.yaml and values-private.yaml configuration files with new values.
Run the helm upgrade command and specify the configuration files using the -f option:
```
$ helm upgrade -n stackrox \
  stackrox-secured-cluster-services rhacs/secured-cluster-services \
  --reuse-values \ 1
  -f <path_to_values_public.yaml> \
  -f <path_to_values_private.yaml>
```
1
You must specify the --reuse-values parameter, otherwise the Helm upgrade command resets all previously configured settings.
Note
You can also specify configuration values using the --set or --set-file parameters. However, these options are not saved, and it requires you to manually specify all the options again whenever you make changes.

6.5.2. Installing RHACS on secured clusters by using the roxctl CLI

To install RHACS on secured clusters by using the CLI, perform the following steps:

Install the roxctl CLI.
Install Sensor.

6.5.2.1. Installing the roxctl CLI

You must first download the binary. You can install roxctl on Linux, Windows, or macOS.

6.5.2.1.1. Installing the roxctl CLI on Linux

You can install the roxctl CLI binary on Linux by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Linux/roxctl

Make the roxctl binary executable:
```
$ chmod +x roxctl
```
Place the roxctl binary in a directory that is on your PATH:
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

6.5.2.1.2. Installing the roxctl CLI on macOS

You can install the roxctl CLI binary on macOS by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Darwin/roxctl

Remove all extended attributes from the binary:
```
$ xattr -c roxctl
```
Make the roxctl binary executable:
```
$ chmod +x roxctl
```
Place the roxctl binary in a directory that is on your PATH:
To check your PATH, execute the following command:
```
$ echo $PATH
```

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

6.5.2.1.3. Installing the roxctl CLI on Windows

You can install the roxctl CLI binary on Windows by using the following procedure.

Procedure

Download the latest version of the roxctl CLI:

$ curl -O https://mirror.openshift.com/pub/rhacs/assets/3.73.5/bin/Windows/roxctl.exe

Verification

Verify the roxctl version you have installed:
```
$ roxctl version
```

6.5.2.2. Installing Sensor

To monitor a cluster, you must deploy Sensor. You must deploy Sensor into each cluster that you want to monitor. The following steps describe adding Sensor by using the RHACS portal.

Prerequisites

You must have already installed Central services, or you can access Central services on Red Hat Advanced Cluster Security Cloud Service (ACSCS).

Procedure

On the RHACS portal, navigate to Platform Configuration → Clusters.
Select + New Cluster.
Specify a name for the cluster.
Provide appropriate values for the fields based on where you are deploying the Sensor.
- Enter the Central API Endpoint, including the address and the port number. You can view this information again in the Red Hat Hybrid Cloud Console by choosing Advanced Cluster Security → ACS Instances, and then clicking the ACS instance you created.
Click Next to continue with the Sensor setup.
Click Download YAML File and Keys to download the cluster bundle (zip archive).
Important
The cluster bundle zip archive includes unique configurations and keys for each cluster. Do not reuse the same files in another cluster.
From a system that has access to the monitored cluster, unzip and run the sensor script from the cluster bundle:
```
$ unzip -d sensor sensor-<cluster_name>.zip
```
```
$ ./sensor/sensor.sh
```
If you get a warning that you do not have the required permissions to deploy Sensor, follow the on-screen instructions, or contact your cluster administrator for assistance.

After Sensor is deployed, it contacts Central and provides cluster information.

Verification

Return to the RHACS portal and check if the deployment is successful. If successful, when viewing your list of clusters in Platform Configuration → Clusters, the cluster status displays a green checkmark and a Healthy status. If you do not see a green checkmark, use the following command to check for problems:
- On Kubernetes:
```
$ kubectl get pod -n stackrox -w
```
Click Finish to close the window.

6.6. Verifying installation of RHACS Cloud Service on other platforms

After installing ACSCS, you can perform some steps to verify that the installation was successful.

If no data appears in the ACS Console:

Ensure that at least one secured cluster is connected to your ACSCS instance. For more information, see the "Installing secured cluster resources on each cluster" section.
Examine your Sensor pod logs to ensure that the connection to your ACSCS instance is successful.
In the OCP cluster, navigate to Platform Configuration → Clusters to verify that the components are healthy and view additional operational information.
Examine the values in the SecuredCluster API in the Operator on your local cluster to ensure that the Central API Endpoint has been entered correctly. This value should be the same value as shown in the ACS instance details in the Red Hat Hybrid Cloud Console.

Chapter 7. Uninstalling Red Hat Advanced Cluster Security for Kubernetes

When you install Red Hat Advanced Cluster Security for Kubernetes, it creates:

A namespace called rhacs-operator where the Operator is installed, if you chose the Operator method of installation
A namespace called stackrox, or another namespace where you created the Central and SecuredCluster custom resources
PodSecurityPolicy and Kubernetes role-based access control (RBAC) objects for all components
Additional labels on namespaces, for use in generated network policies
An application custom resource definition (CRD), if it does not exist

Uninstalling Red Hat Advanced Cluster Security for Kubernetes involves deleting all of these items.

7.1. Deleting namespace

You can delete the namespace that Red Hat Advanced Cluster Security for Kubernetes creates by using the OpenShift Container Platform or Kubernetes command-line interface.

Procedure

Delete the stackrox namespace:
- On OpenShift Container Platform:
```
$ oc delete namespace stackrox
```
- On Kubernetes:
```
$ kubectl delete namespace stackrox
```

Note

If you installed RHACS in a different namespace, use the name of that namespace in the delete command.

7.2. Deleting global resources

You can delete the global resources that Red Hat Advanced Cluster Security for Kubernetes creates, by using the OpenShift Container Platform or Kubernetes command-line interface.

Procedure

Delete global resources:

On OpenShift Container Platform:

$ oc get clusterrole,clusterrolebinding,role,rolebinding,psp -o name | grep stackrox | xargs oc delete --wait

$ oc delete scc -l "app.kubernetes.io/name=stackrox"

$ oc delete ValidatingWebhookConfiguration stackrox

On Kubernetes:

$ kubectl get clusterrole,clusterrolebinding,role,rolebinding,psp -o name | grep stackrox | xargs kubectl delete --wait

$ kubectl delete ValidatingWebhookConfiguration stackrox

7.3. Deleting labels and annotations

You can delete the labels and annotations that Red Hat Advanced Cluster Security for Kubernetes creates, by using the OpenShift Container Platform or Kubernetes command-line interface.

Procedure

Delete labels and annotations:

On OpenShift Container Platform:

$ for namespace in $(oc get ns | tail -n +2 | awk '{print $1}'); do     oc label namespace $namespace namespace.metadata.stackrox.io/id-;     oc label namespace $namespace namespace.metadata.stackrox.io/name-;     oc annotate namespace $namespace modified-by.stackrox.io/namespace-label-patcher-;   done

On Kubernetes:

$ for namespace in $(kubectl get ns | tail -n +2 | awk '{print $1}'); do     kubectl label namespace $namespace namespace.metadata.stackrox.io/id-;     kubectl label namespace $namespace namespace.metadata.stackrox.io/name-;     kubectl annotate namespace $namespace modified-by.stackrox.io/namespace-label-patcher-;   done

Legal Notice

The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.

Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.

Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.

Linux® is the registered trademark of Linus Torvalds in the United States and other countries.

Java® is a registered trademark of Oracle and/or its affiliates.

XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.

MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.

Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.

The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.

All other trademarks are the property of their respective owners.

Language and Page Formatting Options

Installing

Installing Red Hat Advanced Cluster Security for Kubernetes

Chapter 1. Installation platforms and methods

1.1. Installation methods for different platforms

Chapter 2. Getting started with RHACS Cloud Service

2.1. Accessing the ACS Console

2.2. Creating an RHACS Cloud Service project

2.3. Generating an init bundle

2.4. Applying an init bundle by creating resources

2.5. Installing secured cluster resources on each cluster

2.5.1. Installing the Operator on the cluster

2.5.2. Creating Secured Cluster resources

2.5.3. Verifying RHACS Cloud Service installation

Chapter 3. Installing RHACS on Red Hat OpenShift

3.1. High-level overview of installing RHACS on Red Hat OpenShift

3.2. Prerequisites for RHACS on Red Hat OpenShift

3.2.1. General requirements

3.2.2. Prerequisites for installing Central

Memory and storage requirements

Sizing guidelines

3.2.3. Prerequisites for installing Scanner

Memory and storage requirements

3.2.4. Prerequisites for installing Sensor

Memory and storage requirements

3.2.5. Prerequisites for installing Admission controller

Memory and storage requirements

3.2.6. Prerequisites for installing Collector

Memory and storage requirements

3.3. Installing Central services for RHACS on Red Hat OpenShift

3.3.1. Install Central using the Operator

3.3.1.1. Installing the Red Hat Advanced Cluster Security for Kubernetes Operator

3.3.1.2. Installing Central using the Operator method

3.3.1.3. Verifying Central installation using the Operator method

3.3.2. Install Central using Helm charts

3.3.2.1. Install Central using Helm charts without customization

3.3.2.1.1. Adding the Helm chart repository

3.3.2.1.2. Installing the central-services Helm chart without customizations

3.3.2.2. Install Central using Helm charts with customizations

3.3.2.2.1. Private configuration file

3.3.2.2.1.1. Image pull secrets

3.3.2.2.1.2. Proxy configuration

3.3.2.2.1.3. Central

3.3.2.2.1.4. Scanner

3.3.2.2.2. Public configuration file

3.3.2.2.2.1. Image pull secrets

3.3.2.2.2.2. Image

3.3.2.2.2.3. Environment variables

3.3.2.2.2.4. Additional trusted certificate authorities

3.3.2.2.2.5. Central

3.3.2.2.2.6. Scanner

3.3.2.2.2.7. Customization

3.3.2.2.2.8. Advanced customization

3.3.2.2.3. Installing the central-services Helm chart

3.3.2.3. Changing configuration options after deploying the central-services Helm chart

3.3.3. Install Central using the roxctl CLI

3.3.3.1. Installing the roxctl CLI

3.3.3.1.1. Installing the roxctl CLI on Linux

3.3.3.1.2. Installing the roxctl CLI on macOS

3.3.3.1.3. Installing the roxctl CLI on Windows

3.3.3.2. Using the interactive installer

3.3.3.3. Running the Central installation scripts

3.4. Optional - Configuring Central configuration options for RHACS using the Operator

3.4.1. Central configuration options using the Operator

3.4.1.1. Central settings

3.4.1.2. Scanner settings

3.4.1.3. General and miscellaneous settings

3.5. Generating and applying an init bundle for RHACS on Red Hat OpenShift

3.5.1. Generating an init bundle

3.5.1.1. Generating an init bundle by using the RHACS portal

3.5.1.2. Generating an init bundle by using the roxctl CLI

3.5.2. Creating resources by using the init bundle

3.6. Installing secured cluster services for RHACS on Red Hat OpenShift

3.6.1. Installing RHACS on secured clusters by using the Operator

3.6.1.1. Installing secured cluster services

3.6.2. Installing RHACS on secured clusters by using Helm charts

3.6.2.1. Installing RHACS on secured clusters by using Helm charts without customizations

3.6.2.1.1. Adding the Helm chart repository

3.6.2.1.2. Installing the secured-cluster-services Helm chart without customization

3.6.2.2. Configuring the secured-cluster-services Helm chart with customizations