Autoscaling is enabled for the machine pool.

You can disable autoscaling by using the console or the command line.

Autoscaling is disabled.

To import a set of bare metal assets, complete the following steps:

To use the REST API to create a bare metal asset, do the following:

Tip: You can append --v=9 to an oc command to see the raw output of the resulting action. This can be useful for ascertaining the REST API route for an oc command.

Create the AgentServiceConfig custom resource by completing the following steps:

You can verify that it is healthy by checking the assisted-service and assisted-image-service deployments and ensuring that their pods are ready and running. Continue with Creating your infrastructure environment with the console.

Manually create a Provisioning CR to enable services for automated provisioning by using the following command:

oc create -f provisioning-configuration.yaml

Your CR might resemble the following sample:

apiVersion: metal3.io/v1alpha1
kind: Provisioning
metadata:
  name: provisioning-configuration
spec:
  provisioningNetwork: Disabled
  watchAllNamespaces: true

If you are running your hub cluster on Amazon Web Services and want to enable the CIM service, complete the following additional steps after Enabling CIM:

To verify that the CIM service is enabled on Amazon Web Services, complete the following steps:

See the following prerequisites before creating a cluster on AWS:

Note: If you change your cloud provider access key, you must manually update the provisioned cluster access key. For more information, see the known issue, Automatic secret updates for provisioned clusters is not supported.

To create a cluster from the Red Hat Advanced Cluster Management console, navigate to Infrastructure > Clusters. On the Clusters page, click Create cluster and complete the steps in the console.

Note: This procedure is for creating a cluster. If you have an existing cluster that you want to import, see Importing a target managed cluster to the hub cluster for those steps.

If you need to create a credential, see Creating a credential for Amazon Web Services for more information.

The name of the cluster is used in the hostname of the cluster.

Important: When you create a cluster, the Red Hat Advanced Cluster Management controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.

Tip: Select YAML: On to view content updates as you enter the information in the console.

If you want to add your cluster to an existing cluster set, you must have the correct permissions on the cluster set to add it. If you do not have cluster-admin privileges when you are creating the cluster, you must select a cluster set on which you have clusterset-admin permissions. If you do not have the correct permissions on the specified cluster set, the cluster creation fails. Contact your cluster administrator to provide you with clusterset-admin permissions to a cluster set if you do not have any cluster set options to select.

Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a ManagedClusterSet, it is automatically added to the default managed cluster set.

If there is already a base DNS domain that is associated with the selected credential that you configured with your AWS account, that value is populated in the field. You can change the value by overwriting it. This name is used in the hostname of the cluster. See Configuring an AWS account for more information.

The release image identifies the version of the OpenShift Container Platform image that is used to create the cluster. If the version that you want to use is available, you can select the image from the list of images. If the image that you want to use is not a standard image, you can enter the URL to the image that you want to use. See Release images for more information about release images.

The node pools include the control plane pool and the worker pools. The control plane nodes share the management of the cluster activity. The information includes the following fields:

You can create zero or more worker nodes in a worker pool to run the container workloads for the cluster. They can be in a single worker pool, or distributed across multiple worker pools. If zero worker nodes are specified, the control plane nodes also function as worker nodes. The optional information includes the following fields:

Networking details are required for your cluster, and multiple networks are required for using IPv6. You can add an additional network by clicking Add network.

Proxy information that is provided in the credential is automatically added to the proxy fields. You can use the information as it is, overwrite it, or add the information if you want to enable a proxy. The following list contains the required information for creating a proxy:

When you review your information and optionally customize it before creating the cluster, you can select YAML: On to view the install-config.yaml file content in the panel. You can edit the YAML file with your custom settings, if you have any updates.

Note: You do not have to run the kubectl command that is provided with the cluster details to import the cluster. When you create the cluster, it is automatically configured under the management of Red Hat Advanced Cluster Management.

Continue with Accessing your cluster for instructions for accessing your cluster.

See the following prerequisites before creating a cluster on Azure:

Note: If you change your cloud provider access key, you must manually update the provisioned cluster access key. For more information, see the known issue, Automatic secret updates for provisioned clusters is not supported.

To create a cluster from the Red Hat Advanced Cluster Management for Kubernetes console, navigate to Infrastructure > Clusters. On the Clusters page, click Create cluster and complete the steps in the console.

Note: This procedure is for creating a cluster. If you have an existing cluster that you want to import, see Importing a target managed cluster to the hub cluster for those steps.

If you need to create a credential, see Creating a credential for Microsoft Azure for more information.

The name of the cluster is used in the hostname of the cluster.

Important: When you create a cluster, the Red Hat Advanced Cluster Management controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.

Tip: Select YAML: On to view content updates as you enter the information in the console.

If you want to add your cluster to an existing cluster set, you must have the correct permissions on the cluster set to add it. If you do not have cluster-admin privileges when you are creating the cluster, you must select a cluster set on which you have clusterset-admin permissions. If you do not have the correct permissions on the specified cluster set, the cluster creation fails. Contact your cluster administrator to provide you with clusterset-admin permissions to a cluster set if you do not have any cluster set options to select.

Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a ManagedClusterSet, it is automatically added to the default managed cluster set.

If there is already a base DNS domain that is associated with the selected credential that you configured for your Azure account, that value is populated in that field. You can change the value by overwriting it. See Configuring a custom domain name for an Azure cloud service for more information. This name is used in the hostname of the cluster.

The release image identifies the version of the OpenShift Container Platform image that is used to create the cluster. If the version that you want to use is available, you can select the image from the list of images. If the image that you want to use is not a standard image, you can enter the URL to the image that you want to use. See Release images for more information about release images.

The Node pools include the control plane pool and the worker pools. The control plane nodes share the management of the cluster activity. The information includes the following optional fields:

You can create one or more worker nodes in a worker pool to run the container workloads for the cluster. They can be in a single worker pool, or distributed across multiple worker pools. If zero worker nodes are specified, the control plane nodes also function as worker nodes. The information includes the following fields:

You can add an additional network by clicking Add network. You must have more than one network if you are using IPv6 addresses.

Proxy information that is provided in the credential is automatically added to the proxy fields. You can use the information as it is, overwrite it, or add the information if you want to enable a proxy. The following list contains the required information for creating a proxy:

When you review your information and optionally customize it before creating the cluster, you can click the YAML switch On to view the install-config.yaml file content in the panel. You can edit the YAML file with your custom settings, if you have any updates.

Note: You do not have to run the kubectl command that is provided with the cluster details to import the cluster. When you create the cluster, it is automatically configured under the management of Red Hat Advanced Cluster Management.

Continue with Accessing your cluster for instructions for accessing your cluster.

See the following prerequisites before creating a cluster on GCP:

Note: If you change your cloud provider access key, you must manually update the provisioned cluster access key. For more information, see the known issue, Automatic secret updates for provisioned clusters is not supported.

To create clusters from the Red Hat Advanced Cluster Management for Kubernetes console, navigate to Infrastructure > Clusters. On the Clusters page, click Create cluster and complete the steps in the console.

Note: This procedure is for creating a cluster. If you have an existing cluster that you want to import, see Importing a target managed cluster to the hub cluster for those steps.

If you need to create a credential, see Creating a credential for Google Cloud Platform for more information.

The name of your cluster is used in the hostname of the cluster. There are some restrictions that apply to naming your GCP cluster. These restrictions include not beginning the name with goog or containing a group of letters and numbers that resemble google anywhere in the name. See Bucket naming guidelines for the complete list of restrictions.

Important: When you create a cluster, the Red Hat Advanced Cluster Management controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.

Tip: Select YAML: On to view content updates as you enter the information in the console.

If you want to add your cluster to an existing cluster set, you must have the correct permissions on the cluster set to add it. If you do not have cluster-admin privileges when you are creating the cluster, you must select a cluster set on which you have clusterset-admin permissions. If you do not have the correct permissions on the specified cluster set, the cluster creation fails. Contact your cluster administrator to provide you with clusterset-admin permissions to a cluster set if you do not have any cluster set options to select.

Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a ManagedClusterSet, it is automatically added to the default managed cluster set.

If there is already a base DNS domain that is associated with the selected credential for your GCP account, that value is populated in the field. You can change the value by overwriting it. See Setting up a custom domain for more information. This name is used in the hostname of the cluster.

The release image identifies the version of the OpenShift Container Platform image that is used to create the cluster. If the version that you want to use is available, you can select the image from the list of images. If the image that you want to use is not a standard image, you can enter the URL to the image that you want to use. See Release images for more information about release images.

The Node pools include the control plane pool and the worker pools. The control plane nodes share the management of the cluster activity. The information includes the following fields:

You can create one or more worker nodes in a worker pool to run the container workloads for the cluster. They can be in a single worker pool, or distributed across multiple worker pools. If zero worker nodes are specified, the control plane nodes also function as worker nodes. The information includes the following fields:

The networking details are required, and multiple networks are required for using IPv6 addresses. You can add an additional network by clicking Add network.

Proxy information that is provided in the credential is automatically added to the proxy fields. You can use the information as it is, overwrite it, or add the information if you want to enable a proxy. The following list contains the required information for creating a proxy:

When you review your information and optionally customize it before creating the cluster, you can select YAML: On to view the install-config.yaml file content in the panel. You can edit the YAML file with your custom settings, if you have any updates.

Note: You do not have to run the kubectl command that is provided with the cluster details to import the cluster. When you create the cluster, it is automatically configured under the management of Red Hat Advanced Cluster Management.

Continue with Accessing your cluster for instructions for accessing your cluster.

See the following prerequisites before creating a cluster on vSphere:

Note: When creating a cluster by using the VMware vSphere or Red Hat OpenStack Platform providers and disconnected installation, if a certificate is required to access the mirror registry, you must enter it in the Additional trust bundle field of your credential in the Configuration for disconnected installation section. You cannot enter them in the cluster creation console editor.

To create a cluster from the Red Hat Advanced Cluster Management for Kubernetes console, navigate to Infrastructure > Clusters. On the Clusters page, click Create cluster and complete the steps in the console.

Note: This procedure is for creating a cluster. If you have an existing cluster that you want to import, see Importing a target managed cluster to the hub cluster for those steps.

If you need to create a credential, see Creating a credential for VMware vSphere for more information about creating a credential.

The name of your cluster is used in the hostname of the cluster.

Important: When you create a cluster, the Red Hat Advanced Cluster Management controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.

Tip: Select YAML: On to view content updates as you enter the information in the console.

If you want to add your cluster to an existing cluster set, you must have the correct permissions on the cluster set to add it. If you do not have cluster-admin privileges when you are creating the cluster, you must select a cluster set on which you have clusterset-admin permissions. If you do not have the correct permissions on the specified cluster set, the cluster creation fails. Contact your cluster administrator to provide you with clusterset-admin permissions to a cluster set if you do not have any cluster set options to select.

Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a ManagedClusterSet, it is automatically added to the default managed cluster set.

If there is already a base domain associated with the selected credential that you configured for your vSphere account, that value is populated in the field. You can change the value by overwriting it. See Installing a cluster on vSphere with customizations for more information. This value must match the name that you used to create the DNS records listed in the prerequisites section. This name is used in the hostname of the cluster.

The release image identifies the version of the OpenShift Container Platform image that is used to create the cluster. If the version that you want to use is available, you can select the image from the list of images. If the image that you want to use is not a standard image, you can enter the URL to the image that you want to use. See Release images for more information about release images

Note: Only release images for OpenShift Container Platform versions 4.5.x and higher are supported.

The node pools include the control plane pool and the worker pools. The control plane nodes share the management of the cluster activity. The information includes the Architecture field. View the following field description:

You can create one or more worker nodes in a worker pool to run the container workloads for the cluster. They can be in a single worker pool, or distributed across multiple worker pools. If zero worker nodes are specified, the control plane nodes also function as worker nodes. The information includes Cores per socket, CPUs, Memory_min MB, _Disk size in GiB, and Node count.

Networking information is required. Multiple networks are required for using IPv6. Some of the required networking information is included the following fields:

You can add an additional network by clicking Add network. You must have more than one network if you are using IPv6 addresses.

Proxy information that is provided in the credential is automatically added to the proxy fields. You can use the information as it is, overwrite it, or add the information if you want to enable a proxy. The following list contains the required information for creating a proxy:

You can define the disconnected installation image by clicking Disconnected installation. See Disconnected installation settings for cluster creation cannot be entered or are ignored if entered for more details on limitations.

You can click Add automation template to create a template.

When you review your information and optionally customize it before creating the cluster, you can click the YAML switch On to view the install-config.yaml file content in the panel. You can edit the YAML file with your custom settings, if you have any updates.

Note: You do not have to run the kubectl command that is provided with the cluster details to import the cluster. When you create the cluster, it is automatically configured under the management of Red Hat Advanced Cluster Management.

Continue with Accessing your cluster for instructions for accessing your cluster.

See the following prerequisites before creating a cluster on Red Hat OpenStack Platform:

To create a cluster from the Red Hat Advanced Cluster Management for Kubernetes console, navigate to Infrastructure > Clusters. On the Clusters page, click Create cluster and complete the steps in the console.

Note: This procedure is for creating a cluster. If you have an existing cluster that you want to import, see Importing a target managed cluster to the hub cluster for those steps.

If you need to create a credential, see Creating a credential for Red Hat OpenStack Platform for more information.

The name of the cluster is used in the hostname of the cluster. The name must contain fewer than 15 characters. This value must match the name that you used to create the DNS records listed in the credential prerequisites section.

Important: When you create a cluster, the Red Hat Advanced Cluster Management controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.

Tip: Select YAML: On to view content updates as you enter the information in the console.

If you want to add your cluster to an existing cluster set, you must have the correct permissions on the cluster set to add it. If you do not have cluster-admin privileges when you are creating the cluster, you must select a cluster set on which you have clusterset-admin permissions. If you do not have the correct permissions on the specified cluster set, the cluster creation fails. Contact your cluster administrator to provide you with clusterset-admin permissions to a cluster set if you do not have any cluster set options to select.

Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a ManagedClusterSet, it is automatically added to the default managed cluster set.

If there is already a base DNS domain that is associated with the selected credential that you configured for your Red Hat OpenStack Platform account, that value is populated in the field. You can change the value by overwriting it. See Managing domains in the Red Hat OpenStack Platform documentation for more information. This name is used in the hostname of the cluster.

The release image identifies the version of the OpenShift Container Platform image that is used to create the cluster. If the version that you want to use is available, you can select the image from the list of images. If the image that you want to use is not a standard image, you can enter the URL to the image that you want to use. See Release images for more information about release images. Only release images for OpenShift Container Platform versions 4.6.x and higher are supported.

The node pools include the control plane pool and the worker pools. The control plane nodes share the management of the cluster activity. The information includes the following fields:

You can create one or more worker nodes in a worker pool to run the container workloads for the cluster. They can be in a single worker pool, or distributed across multiple worker pools. If zero worker nodes are specified, the control plane nodes also function as worker nodes. The information includes the following fields:

Networking details are required for your cluster. You must provide the values for one or more networks for an IPv4 network. For an IPv6 network, you must define more than one network.

You can add an additional network by clicking Add network. You must have more than one network if you are using IPv6 addresses.

Proxy information that is provided in the credential is automatically added to the proxy fields. You can use the information as it is, overwrite it, or add the information if you want to enable a proxy. The following list contains the required information for creating a proxy:

You can define the disconnected installation image by clicking Disconnected installation. See Disconnected installation settings for cluster creation cannot be entered or are ignored if entered for more details on limitations.

When you review your information and optionally customize it before creating the cluster, you can click the YAML switch On to view the install-config.yaml file content in the panel. You can edit the YAML file with your custom settings, if you have any updates.

Note: You do not have to run the kubectl command that is provided with the cluster details to import the cluster. When you create the cluster, it is automatically configured under the management of Red Hat Advanced Cluster Management.

Continue with Accessing your cluster for instructions for accessing your cluster.

See the following prerequisites before creating a cluster on Red Hat Virtualization:

Note: If you change your cloud provider access key, you must manually update the provisioned cluster access key. For more information, see the known issue, Automatic secret updates for provisioned clusters is not supported.

To create a cluster from the Red Hat Advanced Cluster Management for Kubernetes console, navigate to Infrastructure > Clusters. On the Clusters page, click Create cluster and complete the steps in the console.

Note: This procedure is for creating a cluster. If you have an existing cluster that you want to import, see Importing a target managed cluster to the hub cluster for those steps.

If you need to create a credential, see Creating a credential for Red Hat Virtualization for more information.

The name of your cluster is used in the hostname of the cluster.

Important: When you create a cluster, the Red Hat Advanced Cluster Management controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.

Tip: Select YAML: On to view content updates as you enter the information in the console.

If you want to add your cluster to an existing cluster set, you must have the correct permissions on the cluster set to add it. If you do not have cluster-admin privileges when you are creating the cluster, you must select a cluster set on which you have clusterset-admin permissions. If you do not have the correct permissions on the specified cluster set, the cluster creation fails. Contact your cluster administrator to provide you with clusterset-admin permissions to a cluster set if you do not have any cluster set options to select.

Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a ManagedClusterSet, it is automatically added to the default managed cluster set.

If there is already a base DNS domain that is associated with the selected credential that you configured for your Red Hat Virtualization account, that value is populated in that field. You can overwrite the value to change it.

The release image identifies the version of the OpenShift Container Platform image that is used to create the cluster. If the version that you want to use is available, you can select the image from the list of images. If the image that you want to use is not a standard image, you can enter the URL to the image that you want to use. See Release images for more information about release images.

The information for your node pools includes the number of Cores, Sockets, Memory, and Disk size for the the control plane pool. The three control plane nodes share the management of the cluster activity. The information includes the Architecture field. View the following field description:

The worker pool information requires the pool name, number of cores, memory allocation, disk size allocation, and node count for your worker pools. Your worker nodes within the worker pool can be in a single worker pool, or distributed across multiple worker pools.

The following networking details are required from your preconfigured oVirt environment.

Proxy information that is provided in the credential is automatically added to the proxy fields. You can use the information as it is, overwrite it, or add the information if you want to enable a proxy. The following list contains the required information for creating a proxy:

When you review your information and optionally customize it before creating the cluster, you can click the YAML switch On to view the install-config.yaml file content in the panel. You can edit the YAML file with your custom settings, if you have any updates.

Note: You do not have to run the kubectl command that is provided with the cluster details to import the cluster. When you create the cluster, it is automatically configured under the management of Red Hat Advanced Cluster Management.

Continue with Accessing your cluster for instructions for accessing your cluster.

See the following prerequisites before creating a cluster in a bare metal environment:

To create a cluster from the Red Hat Advanced Cluster Management for Kubernetes console, navigate to Infrastructure > Clusters. On the Clusters page, click Create cluster and complete the steps in the console.

Note: This procedure is for creating a cluster. If you have an existing cluster that you want to import, see Importing a target managed cluster to the hub cluster for those steps.

If you need to create a credential, see Creating a credential for bare metal for more information about creating a credential.

For a bare metal cluster, the name of the cluster cannot be an arbitrary name. It is associated with the cluster URL. Make sure that the cluster name that you use is consistent with your DNS and network setup.

Important: When you create a cluster, the Red Hat Advanced Cluster Management controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.

Tip: Select YAML: On to view content updates as you enter the information in the console.

If you want to add your cluster to an existing cluster set, you must have the correct permissions on the cluster set to add it. If you do not have cluster-admin privileges when you are creating the cluster, you must select a cluster set on which you have clusterset-admin permissions. If you do not have the correct permissions on the specified cluster set, the cluster creation fails. Contact your cluster administrator to provide you with clusterset-admin permissions to a cluster set if you do not have any cluster set options to select.

Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a ManagedClusterSet, it is automatically added to the default managed cluster set.

The base domain of your provider is used to create routes to your Red Hat OpenShift Container Platform cluster components. It is configured in the DNS of your cluster provider as a Start of Authority (SOA) record. This name is used in the hostname of the cluster.

If there is already a base DNS domain that is associated with the selected credential that you configured for your bare metal provider account, that value is populated in that field. You can change the value by overwriting it, but you cannot change the name after the cluster is created. See Installing on bare metal in the OpenShift Container Platform documentation for more information.

The release image identifies the version of the OpenShift Container Platform image that is used to create the cluster. If the image that you want to use is not a standard image, you can enter the URL to the image that you want to use. See Release images for more information about release images.

The list of hosts is compiled from the existing bare metal assets, and are associated with your credential. Ensure that you are running the latest firmware on the bare metal hosts, or the provision might fail. You must select a minimum of three bare metal assets that are on the same bridge networks as the hypervisor. If you do not have any bare metal assets created, then you can create or import them before you continue with the creation process by selecting Import assets. For more information about creating bare metal assets, see Creating and modifying bare metal assets. Alternatively, you can select Disable certificate verification to bypass the requirement.

The following table shows the networking options and their descriptions:

You must have more than one network if you are using IPv6 addresses.

Proxy information that is provided in the credential is automatically added to the proxy fields. You can use the information as it is, overwrite it, or add the information if you want to enable a proxy. The following list contains the required information for creating a proxy:

When you review your information and optionally customize it before creating the cluster, you can select YAML: On to view the install-config.yaml file content in the panel. You can edit the YAML file with your custom settings, if you have any updates.

Note: You do not have to run the kubectl command that is provided with the cluster details to import the cluster. When you create the cluster, it is automatically configured with the management of Red Hat Advanced Cluster Management.

Continue with Accessing your cluster for instructions for accessing your cluster.

See the following prerequisites before creating a cluster in an on-premises environment:

To create a cluster from the Red Hat Advanced Cluster Management for Kubernetes console, navigate to Infrastructure > Clusters. On the Clusters page, click Create cluster and complete the steps in the console.

The following options are available for your assisted installation:

If you need to create a credential, see Creating a credential for an on-premises environment for more information.

The name for your cluster is used in the hostname of the cluster.

Important: When you create a cluster, the Red Hat Advanced Cluster Management controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.

Tip: Select YAML: On to view content updates as you enter the information in the console.

If you want to add your cluster to an existing cluster set, you must have the correct permissions on the cluster set to add it. If you do not have cluster-admin privileges when you are creating the cluster, you must select a cluster set on which you have clusterset-admin permissions. If you do not have the correct permissions on the specified cluster set, the cluster creation fails. Contact your cluster administrator to provide you with clusterset-admin permissions to a cluster set if you do not have any cluster set options to select.

Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a ManagedClusterSet, it is automatically added to the default managed cluster set.

If there is already a base DNS domain that is associated with the selected credential that you configured for your provider account, that value is populated in that field. You can change the value by overwriting it, but this setting cannot be changed after the cluster is created. The base domain of your provider is used to create routes to your Red Hat OpenShift Container Platform cluster components. It is configured in the DNS of your cluster provider as a Start of Authority (SOA) record.

The OpenShift version identifies the version of the OpenShift Container Platform image that is used to create the cluster. If the version that you want to use is available, you can select the image from the list of images. If the image that you want to use is not a standard image, you can enter the URL to the image that you want to use. See Release images for more information about release images.

When you select an OpenShift version that is 4.9 or later, an option to select Install single node OpenShift (SNO) is displayed. A single-node OpenShift cluster contains a single node which hosts the control plane services and the user workloads. You cannot add additional nodes to a single-node OpenShift cluster after it is created.

If you want your cluster to be a single-node OpenShift cluster, select the single-node OpenShift option.

Note: The single-node OpenShift control plane requires 8 CPU cores, while a control plane node for a multinode control plane cluster only requires 4 CPU cores.

After you review and save the cluster, your cluster is saved as a draft cluster. You can close the creation process and finish the process later by selecting the cluster name on the Clusters page.

If you are using existing hosts, select whether you want to select the hosts yourself, or if you want them to be selected automatically. The number of hosts is based on the number of nodes that you selected. For example, a SNO cluster only requires one host, while a standard three-node cluster requires three hosts.

The locations of the available hosts that meet the requirements for this cluster are displayed in the list of Host locations. For distribution of the hosts and a more high-availability configuration, select multiple locations.

If you are discovering new hosts with no existing infrastructure environment, complete the steps in Adding hosts to an infrastructure environment beginning with step 4 to define your hosts.

After the hosts are bound, and the validations pass, complete the networking information for your cluster by adding the following IP addresses:

You can view the status of the installation on the Clusters navigation page.

Continue with Accessing your cluster for instructions for accessing your cluster.

To use the Red Hat Advanced Cluster Management console to hibernate a cluster that was created by Red Hat Advanced Cluster Management, complete the following steps:

The status for the cluster on the Clusters page is Hibernating when the process completes.

Tip: You can hibernate multiple clusters by selecting the clusters that you want to hibernate on the Clusters page, and selecting Actions > Hibernate clusters.

Your selected cluster is hibernating.

To use the CLI to hibernate a cluster that was created by Red Hat Advanced Cluster Management, complete the following steps:

Your selected cluster is hibernating.

To resume normal operation of a hibernating cluster by using the Red Hat Advanced Cluster Management console, complete the following steps:

The status for the cluster on the Clusters page is Ready when the process completes.

Tip: You can resume multiple clusters by selecting the clusters that you want to resume on the Clusters page, and selecting Actions > Resume clusters.

Your selected cluster is resuming normal operation.

To resume normal operation of a hibernating cluster by using the CLI, complete the following steps:

Your selected cluster is resuming normal operation.

Required user type or access level: Cluster administrator

You can import existing clusters from the Red Hat Advanced Cluster Management for Kubernetes console for each of the available cloud providers.

Note: A hub cluster cannot manage a different hub cluster. A hub cluster is set up to automatically import and manage itself, so you do not have to manually import a hub cluster to manage itself.

Important: When you create a cluster, the Red Hat Advanced Cluster Management controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.

Your cluster is imported. You can import another by selecting Import another.

Complete the following procedure to remove an imported cluster and the open-cluster-management-agent-addon that was created on the managed cluster.

On the Clusters page, click Actions > Detach cluster to remove your cluster from management.

Note: If you attempt to detach the hub cluster, which is named local-cluster, be aware that the default setting of disableHubSelfManagement is false. This setting causes the hub cluster to reimport itself and manage itself when it is detached and it reconciles the MultiClusterHub controller. It might take hours for the hub cluster to complete the detachment process and reimport. If you want to reimport the hub cluster without waiting for the processes to finish, you can enter the following command to restart the multiclusterhub-operator pod and reimport faster:

oc delete po -n open-cluster-management `oc get pod -n open-cluster-management | grep multiclusterhub-operator| cut -d' ' -f1`

You can change the value of the hub cluster to not import automatically by changing the disableHubSelfManagement value to true. For more information, see the disableHubSelfManagement topic.

Continue with Importing the cluster with the auto import secret or Importing the cluster with the manual commands.

To import with the auto import secret, you must create a secret that contains either a reference to the kubeconfig file of the cluster or the kube API server and token pair of the cluster.

Continue with Importing the klusterlet add-on.

Important: The import command contains pull secret information that is copied to each of the imported clusters. Anyone who can access the imported clusters can also view the pull secret information.

Continue with Importing the klusterlet add-on.

You can create and apply the klusterlet add-on configuration file by completing the following procedure:

Your cluster is now imported.

To remove a cluster, run the following command:

oc delete managedcluster ${CLUSTER_NAME}

Replace cluster_name with the name of the cluster.

Your cluster is now removed.

Complete the following steps to import a cluster with a ManagedClusterImageRegistry CRD:

The following settings can be updated in the klusterletaddonconfigs.agent.open-cluster-management.io Kubernetes resource:

You can modify the settings of the klusterletaddonconfigs.agent.open-cluster-management.io resource by using the hub cluster. Complete the following steps to change the settings:

You must have access to the cluster-name namespace to modify your settings by using the hub cluster. Complete the following steps:

Complete the following steps to create a managed cluster set by using the Red Hat Advanced Cluster Management console:

Add the following definition of the managed cluster set to your yaml file to create a managed cluster set by using the command line:

apiVersion: cluster.open-cluster-management.io/v1beta1
kind: ManagedClusterSet
metadata:
  name: <clusterset1>

Replace clusterset1 with the name of your managed cluster set.

Create a ManagedClusterSetBinding resource to bind a ManagedClusterSet resource to a namespace. Applications and policies that are created in the same namespace can only access managed clusters that are included in the bound managed cluster set resource.

Access permissions to the namespace automatically apply to a managed cluster set that is bound to that namespace. If you have access permissions to access the namespace to which the managed cluster set is bound, you automatically have permissions to access any managed cluster set that is bound to that namespace. However, if you only have permissions to access the managed cluster set, you do not automatically have permissions to access other managed cluster sets on the namespace. If you do not see a managed cluster set, you might not have the required permissions to view it.

You can create a managed cluster set binding by using the console or the command line.

Complete the following steps to add a cluster to a managed cluster set by using the Red Hat Advanced Cluster Management console:

Complete the following steps to add a cluster to a managed cluster set by using the command line:

Complete the following steps to remove a cluster from a managed cluster set by using the Red Hat Advanced Cluster Management console:

Note: If you are moving a managed cluster from one managed cluster set to another, you must have the required RBAC permissions on both managed cluster sets.

To remove a managed cluster from a managed cluster set by using the command line, complete the following steps:

Note: If you are moving a managed cluster from one managed cluster set to another, you must have the required RBAC permission available on both managed cluster sets.

See the following information about how placement with managed clusters works:

The Placement specification includes the following fields:

Note: The configurations.name file will be removed in v1beta1 and replaced by the scoreCoordinate.builtIn file. If both name and scoreCoordinate.builtIn are defined, the value in scoreCoordinate.builtIn is used to determine the selection.

You need to bind at least one ManagedClusterSet to a namespace by creating a ManagedClusterSetBinding in that namespace. Note: You need role-based access to CREATE on the virtual sub-resource of managedclustersets/bind. See the following examples:

One or multiple PlacementDecisions with label cluster.open-cluster-management.io/placement={placement name} are created to represent the ManagedClusters selected by a Placement.

If a ManagedCluster is selected and added to a PlacementDecision, components that consume this Placement might apply the workload on this ManagedCluster. After the ManagedCluster is no longer selected and it is removed from the PlacementDecisions, the workload that is applied on this ManagedCluster should be removed accordingly.

See the following PlacementDecision sample:

apiVersion: cluster.open-cluster-management.io/v1beta1
kind: PlacementDecision
metadata:
  labels:
    cluster.open-cluster-management.io/placement: placement1
  name: placement1-kbc7q
  namespace: ns1
  ownerReferences:
    - apiVersion: cluster.open-cluster-management.io/v1beta1
      blockOwnerDeletion: true
      controller: true
      kind: Placement
      name: placement1
      uid: 05441cf6-2543-4ecc-8389-1079b42fe63e
status:
  decisions:
    - clusterName: cluster1
      reason: ''
    - clusterName: cluster2
      reason: ''
    - clusterName: cluster3
      reason: ''

You might want to select managed clusters for your placements according to the status of the add-ons that are deployed on them. For example, you want to select a managed cluster for your placement only if there is a specific add-on that is enabled on the cluster.

You can do this by specifying the label for the add-on, as well as its status, if necessary, when you create the Placement. A label is automatically created on a ManagedCluster resource if an add-on is enabled on the cluster. The label is automatically removed if the add-on is disabled.

Each add-on is represented by a label in the format of feature.open-cluster-management.io/addon-<addon_name>=<status_of_addon>.

Replace addon_name with the name of the add-on that should be enabled on the managed cluster that you want to select.

Replace status_of_addon with the status that the add-on should have if the cluster is selected. The possible values of status_of_addon are in the following list:

For example, an available application-manager add-on is represented by a label on the managed cluster that reads:

feature.open-cluster-management.io/addon-application-manager: available

See the following examples of creating placements based on add-ons and their status:

In placement resource-based scheduling, sometimes the prioritizer needs more data than the default value provided by the MananagedCluster resource to calculate the score of the managed cluster. For example, schedule the clusters based on CPU or memory usage data of the clusters that are fetched obtained through a monitoring system.

The API AddOnPlacementScore supports a more extensible way to schedule based on customized scores.

Refer to placement extensible scheduling enhancement in the open-cluster-management repository to learn more.

Taints are specified in the properties of a managed cluster and allow a placement to repel a managed cluster or a set of managed clusters. You can add a taint to a managed cluster by entering a command that resembles the following example:

kubectl taint ManagedCluster <managed_cluster_name> key=value:NoSelect

The specification of a taint includes the following fields:

When a managed cluster is not accessible, you do not want the cluster added to a placement. The following taints are automatically added to managed clusters that are not accessible:

Tolerations are applied to placements, and allow the placements to repel managed clusters that do not have taints that match the tolerations of the placement. The specification of a toleration includes the following fields:

The following example shows how to configure a toleration that tolerates clusters that have taints:

Note: A managed cluster is not guaranteed to be placed on a placement that contains a toleration for the taint. If other placements contain the same toleration, the managed cluster might be placed on one of those placements.

The value of TolerationSeconds specifies the period of time that the toleration tolerates the taint. This temporary toleration can be helpful when a managed cluster is offline and you can transfer applications that are deployed on this cluster to another managed cluster for a tolerated time.

For example, the managed cluster with the following taint becomes unreachable:

apiVersion: cluster.open-cluster-management.io/v1
kind: ManagedCluster
metadata:
  name: cluster1
spec:
  hubAcceptsClient: true
  taints:
    - effect: NoSelect
      key: cluster.open-cluster-management.io/unreachable
      timeAdded: '2022-02-21T08:11:06Z'

If you define a placement with a value for TolerationSeconds, as in the following example, the workload transfers to another available managed cluster after 5 minutes.

apiVersion: cluster.open-cluster-management.io/v1alpha1
kind: Placement
metadata:
  name: demo4
  namespace: demo1
spec:
  tolerations:
    - key: cluster.open-cluster-management.io/unreachable
      operator: Exists
      tolerationSeconds: 300
----

The application is moved to another managed cluster after the managed cluster is unreachable for 5 minutes.

You must have the following available before claiming a cluster from a cluster pool:

A cluster pool with or without available clusters. If there are available clusters in the cluster pool, the available clusters are claimed. If there are no available clusters in the cluster pool, a cluster is created to fulfill the claim. See Creating a cluster pool for information about how to create a cluster pool.

When you create a cluster claim, you request a new cluster from the cluster pool. A cluster is checked out from the pool when a cluster is available. The claimed cluster is automatically imported as one of your managed clusters, unless you disabled automatic import.

Complete the following steps to claim a cluster:

If a cluster is available, it is claimed and immediately appears in the Managed clusters tab. If there are no available clusters, it might take several minutes to resume a hibernated cluster or provision a new cluster. During this time, the claim status is pending. Expand the cluster pool to view or delete pending claims against it.

The claimed cluster remains a member of the cluster set that it was associated with when it was in the cluster pool. You cannot change the cluster set of the claimed cluster when you claim it.

You can deploy hosted control planes by configuring an existing cluster to function as a hosting service cluster. The hosting service cluster is the OpenShift Container Platform cluster where the control planes are hosted, and can be the hub cluster or one of the OpenShift Container Platform managed clusters.

After installing the HyperShift operator and enabling an existing cluster as a hosting service cluster, you can provision a HyperShift hosted cluster by creating a HypershiftDeployment custom resource.

You can now access your cluster. The access secrets are stored in the hypershift-hosting-service-cluster namespace. This namespace is the same as the name of the hosting service cluster. Learn about the following formats secret name formats:

To destroy a HyperShift hosted cluster, delete the HypershiftDeployment resource by running one of the following commands:

oc delete -f <HypershiftDeployment_yaml_file_name>

or

oc delete hd -n <HypershiftDeployment_namespace> <HypershiftDeployment_resource_name>

To uninstall the HyperShift operator from a management or hosting service cluster, delete the hypershift-addon ManagedClusterAddon from the management cluster by running the following command:

oc delete managedclusteraddon -n <hypershift-management-cluster> hypershift-addon

Configure Discovery in the console to find clusters. You can create multiple DiscoveryConfig resources with separate credentials. Follow instructions in the console.

After you set up your credentials and discover your clusters for import, you can view them in the console.

After you discover clusters, you can import clusters that appear in the Discovered clusters tab of the console.

You need access to the namespaces that were used to configure Discovery.

Note: The DiscoveryConfig must be named discovery and must be created in the same namespace as the selected credential. See the following DiscoveryConfig sample:

apiVersion: discovery.open-cluster-management.io/v1
kind: DiscoveryConfig
metadata:
  name: discovery
  namespace: <NAMESPACE_NAME>
spec:
  credential: <SECRET_NAME>
  filters:
    lastActive: 7
    openshiftVersions:
    - "4.10"
    - "4.9"
    - "4.8"

View discovered clusters by running oc get discoveredclusters -n <namespace> where namespace is the namespace where the discovery credential exists.

apiVersion: discovery.open-cluster-management.io/v1
kind: DiscoveredCluster
metadata:
  name: fd51aafa-95a8-41f7-a992-6fb95eed3c8e
  namespace: <NAMESPACE_NAME>
spec:
  activity_timestamp: "2021-04-19T21:06:14Z"
  cloudProvider: vsphere
  console: https://console-openshift-console.apps.qe1-vmware-pkt.dev02.red-chesterfield.com
  creation_timestamp: "2021-04-19T16:29:53Z"
  credential:
    apiVersion: v1
    kind: Secret
    name: <SECRET_NAME>
    namespace: <NAMESPACE_NAME>
  display_name: qe1-vmware-pkt.dev02.red-chesterfield.com
  name: fd51aafa-95a8-41f7-a992-6fb95eed3c8e
  openshiftVersion: 4.10
  status: Stale

You must have the following prerequisites before you can use OpenShift Update Service to upgrade your disconnected clusters:

You must mirror both the image that you want to upgrade to and the current image that you are upgrading from to your local mirror registry. Complete the following steps to mirror the images:

Tip: You can use the output of the last line of this script when you create your ImageContentSourcePolicy.

To deploy the operator for OpenShift Update Service in your OpenShift Container Platform environment, complete the following steps:

OpenShift Update Service uses graph data information to determine the available upgrades. In a connected environment, OpenShift Update Service pulls the graph data information for available upgrades directly from the Cincinnati graph data GitHub repository. Because you are configuring a disconnected environment, you must make the graph data available in a local repository by using an init container. Complete the following steps to create a graph data init container:

If you are using a secure external container registry to store your mirrored OpenShift Container Platform release images, OpenShift Update Service requires access to this registry to build an upgrade graph. Complete the following steps to configure your CA certificate to work with the OpenShift Update Service pod:

The OpenShift Update Service Operator watches the image.config.openshift.io API and the ConfigMap you created in the openshift-config namespace for changes, then restart the deployment if the CA cert has changed.

When you finish deploying the OpenShift Update Service instance on your hub cluster, this instance is located where the images for the cluster upgrades are mirrored and made available to the disconnected managed cluster. Complete the following steps to deploy the instance:

Note: The steps in this section only apply if you have mirrored your releases into your mirrored registry.

OpenShift Container Platform has a default image registry value that specifies where it finds the upgrade packages. In a disconnected environment, you can create a policy to replace that value with the path to your local image registry where you mirrored your release images.

For these steps, the policy is named ImageContentSourcePolicy. Complete the following steps to create the policy:

Push the Catalogsource policy to the managed cluster to change the default location from a connected location to your disconnected local registry.

Push the ClusterVersion policy to the managed cluster to change the default location where it retrieves its upgrades.

You can view a list of available upgrades for your managed cluster by completing the following steps:

You can use the Red Hat Advanced Cluster Management console to select a channel for your cluster upgrades on OpenShift Container Platform version 4.6, or later. Those versions must be available on the mirror registry. Complete the steps in Selecting a channel to specify a channel for your upgrades.

After configuring the disconnected registry, Red Hat Advanced Cluster Management and OpenShift Update Service use the disconnected registry to determine if upgrades are available. If no available upgrades are displayed, make sure that you have the release image of the current level of the cluster and at least one later level mirrored in the local repository. If the release image for the current version of the cluster is not available, no upgrades are available.

Complete the following steps to upgrade:

The managed cluster is updated to the selected version.

If your cluster upgrade fails, the Operator generally retries the upgrade a few times, stops, and reports the status of the failing component. In some cases, the upgrade process continues to cycle through attempts to complete the process. Rolling your cluster back to a previous version following a failed upgrade is not supported. Contact Red Hat support for assistance if your cluster upgrade fails.

The cluster backup and restore operator solution provides backup and restore support for all hub cluster resources like managed clusters, applications, policies, and bare metal assets. You can use the solution to back up any third-party resources extending the basic hub cluster installation. With this backup solution, you can define a cron-based backup schedule, which runs at specified time intervals and continuously backs up the latest version of the hub cluster content.

When the hub cluster needs to be replaced or is in a disaster scenario when the hub cluster goes down, a new hub cluster can be deployed and backed up data is moved to the new hub cluster.

View the following ordered list of the cluster backup and restore process for identifying backup data:

You can backup third-party resources with cluster backup and restore by adding the cluster.open-cluster-management.io/backup label to the resources. The value of the label can be any string, including an empty string. Use a value that can help you identify the component that you are backing up. For example, use the cluster.open-cluster-management.io/backup: idp label if the components are provided by an IDP solution.

Note: Use the cluster-activation value for the cluster.open-cluster-management.io/backup label if you want the resources to be restored when the managed clusters activation resources are restored. Restoring the managed clusters activation resources result in managed clusters being actively managed by the hub cluster, where the restore was started.

apiVersion: my.group/v1alpha1
kind: MyResource
metadata:
  labels:
    cluster.open-cluster-management.io/backup: cluster-activation

When Velero is initially installed, Velero pod is set to the default CPU and memory limits as defined in the following sample:

resources:
 limits:
   cpu: "1"
   memory: 256Mi
 requests:
   cpu: 500m
   memory: 128Mi

The limits from the previous sample work well with some scenarios, but might need to be updated when your cluster backs up a large number of resources. For instance, when back up is run on a hub cluster that manages 2000 clusters, then the Velero pod crashes due to the out-of-memory error (OOM). The following configuration allows for the backup to complete for this scenario:

  limits:
    cpu: "2"
    memory: 1Gi
  requests:
    cpu: 500m
    memory: 256Mi

To update the limits and requests for the Velero pod resource, you need to update the DataProtectionApplication resource and insert the resourceAllocation template for the Velero pod. View the following sample:

apiVersion: oadp.openshift.io/v1alpha1
kind: DataProtectionApplication
metadata:
  name: velero
  namespace: open-cluster-management-backup
spec:
...
  configuration:
...
    velero:
      podConfig:
        resourceAllocations:
          limits:
            cpu: "2"
            memory: 1Gi
          requests:
            cpu: 500m
            memory: 256Mi

Refer to the Velero resource requests and limits customization to find out more about the DataProtectionApplication parameters.

Server-side encryption is data encryption for the application or service that receives the data at the storage location. The backup mechanism itself does not encrypt data while in-transit (as it travels to and from backup storage location), or at rest (while it is stored on disks at backup storage location). Instead it relies on the native mechanisms in the object and snapshot systems.

Best practice: Encrypt the data at the destination using the available backup storage server-side encryption. The backup contains resources, such as credentials and configuration files that need to be encrypted when stored outside of the hub cluster.

You can use serverSideEncryption and kmsKeyId parameters to enable encryption for the backups stored in Amazon S3. For more details, see the Backup Storage Location YAML. The following sample specifies an AWS KMS key ID when setting up the DataProtectionApplication resource:

spec:
  backupLocations:
    - velero:
        config:
          kmsKeyId: 502b409c-4da1-419f-a16e-eif453b3i49f
          profile: default
          region: us-east-1

Refer to Velero supported storage providers to find out about all of the configurable parameters of other storage providers.

A backup schedule is activated when you create the backupschedule.cluster.open-cluster-management.io resource. View the following backupschedule.cluster.open-cluster-management.io sample:

apiVersion: cluster.open-cluster-management.io/v1beta1
kind: BackupSchedule
metadata:
  name: schedule-acm
spec:
  veleroSchedule: 0 */2 * * *
  veleroTtl: 120h

After you create a backupschedule.cluster.open-cluster-management.io resource, run the following command to get the status of the scheduled cluster backups:

oc get bsch -n <oadp-operator-ns>

The <oadp-operator-ns> parameter in the previous command is the namespace where the BackupSchedule is created, which is the same namespace where the OADP Operator is installed. The backupschedule.cluster.open-cluster-management.io resource creates six schedule.velero.io resources, which are used to generate backups. Run the following command to view the list of the backups that are scheduled:

os get schedules -A | grep acm

Resources are separately backed up in the following groups:

Note: The resources backup file contains managed cluster-specific resources, but does not contain the subset of resources that connect managed clusters to the hub cluster. The resources that connect managed clusters are called activation resources and are contained in the managed clusters backup. When you restore backups only for the credentials and resources backup on a new hub cluster, the new hub cluster shows all managed clusters created with the Hive API in a detached state. However, the managed clusters that are imported on the primary hub cluster using the import operation appear only when the activation data is restored on the passive hub cluster. At this time, the managed clusters are still connected to the original hub cluster that created the backup files.

When the activation data is restored, only managed clusters created using the Hive API are automatically connected with the new hub cluster. All other managed clusters appear in a Pending state and must be manually reattached to the new cluster.

Before running the restore operation on a new hub cluster, you need to manually configure the hub cluster and install the same operators as on the initial hub cluster. You must install the Red Hat Advanced Cluster Management operator in the same namespace as the initial hub cluster, create the DataProtectionApplication resource, and then connect to the same storage location where the initial hub cluster previously backed up data.

For example, if the initial hub cluster has any other operators installed, such as Ansible Automation Platform, Red Hat OpenShift GitOps, cert-manager, you have to install them before running the restore operation. This ensures that the new hub cluster is configured in the same way as the initial hub cluster.

Velero currently skips existing backed up resources on the hub cluster. This limits the scenarios that can be used when you restore hub cluster data on a new hub cluster. If the new hub cluster is used and the restore is applied more than once, the hub cluster is not recommended to use as a passive configuration unless the data is cleaned before restore is ran. The data on the new hub cluster is not reflective of the data available with the restored resources.

When a restore.cluster.open-cluster-management.io resource is created, the cluster backup and restore operator runs a set of steps to prepare for restore by cleaning up the hub cluster before the Velero restore begins.

The cleanup option uses the cleanupBeforeRestore property to identify the subset of objects to clean up. There are three options you can set for this clean up:

Notes:

Use the restore-passive-activate sample when you want the hub cluster to manage the clusters. In this case it is assumed that the other data has been restored already on the hub cluster that using the passive resource.

Passive data is backup data such as secrets, ConfigMaps, applications, policies, and all the managed cluster custom resources, which do not activate a connection between managed clusters and hub clusters. The backup resources are restored on the hub cluster by the credentials backup and restore resources.

Use the restore-passive-sync sample to restore passive data, while continuing to check if new backups are available and restore them automatically. To automatically restore new backups, you must set the syncRestoreWithNewBackups parameter to true. You must also only restore the latest passive data.

Set the VeleroResourcesBackupName and VeleroCredentialsBackupName parameters to latest, and the VeleroManagedClustersBackupName parameter to skip. Immediately after the VeleroManagedClustersBackupName is set to latest, the managed clusters are activated on the new hub cluster and is now the primary hub cluster.

When the activated managed cluster becomes the primary hub cluster, the restore resource is set to Finished and the syncRestoreWithNewBackups is ignored, even if set to true.

By default, the controler checks for new backups every 30 minutes when the syncRestoreWithNewBackups is set to true. If new backups are found, it restores the backed up resources. You can change the duration of the check by updating the restoreSyncInterval parameter.

For example, the following resource checks for backups every 10 minutes:

apiVersion: cluster.open-cluster-management.io/v1beta1
kind: Restore
metadata:
  name: restore-acm-passive-sync
spec:
  syncRestoreWithNewBackups: true # restore again when new backups are available
  restoreSyncInterval: 10m # check for new backups every 10 minutes
  cleanupBeforeRestore: CleanupRestored
  veleroManagedClustersBackupName: skip
  veleroCredentialsBackupName: latest
  veleroResourcesBackupName: latest

Only managed clusters connected with the primary hub cluster using the Hive API are automatically connected with the new hub cluster, where the activation data is restored. These clusters have been created on the primary hub cluster using the Create cluster button in the Clusters tab. Managed clusters connected with the initial hub cluster using the Import cluster button appear as Pending Import when the activation data is restored, and must be imported back on the new hub cluster.

The Hive managed clusters can be connected with the new hub cluster because Hive stores the managed cluster kubeconfig in the managed cluster namespace on the hub cluster. This is backed up and restored on the new hub cluster. The import controller then updates the bootstrap kubeconfig on the managed cluster using the restored configuration, which is only available for managed clusters created using the Hive API. It is not available for imported clusters.

To reconnect imported clusters on the new hub cluster, manually create the auto-import-secret resource after your start the restore operation. See Importing the cluster with the auto import secret for more details.

Create the auto-import-secret resource in the managed cluster namespace for each cluster in Pending Import state. Use a kubeconfig or token with enough permissions for the import component to start the automatic import on the new hub cluster. You must have access for each managed cluster by using a token to connect with the managed cluster. The token must have a klusterlet role binding or a role with the same permissions.

Managed cluster activation data or other activation data, is a backup resource. When the activation data is restored on a new hub cluster, managed clusters are then being actively managed by the hub cluster where the restore is run. Activation data resources are stored by the managed clusters backup and by the resource-generic backup, when you use the cluster.open-cluster-management.io/backup: cluster-activation label.

When you add the cluster.open-cluster-management.io/backup: cluster-activation label to a resource, the resource is automatically backed up in the acm-resources-generic-schedule backup resource. Resources usually need to be restored when you set the veleroManagedClustersBackupName:latest label value in the restore resource. If any of these resources need to be restored when the managed clusters are moved to the new hub cluster, set the veleroManagedClustersBackupName:latest label value to cluster-activation. This ensures that the resource is not restored unless the managed cluster activation starts.

Your resource might resemble the following example:

apiVersion: my.group/v1alpha1
kind: MyResource
metadata:
  labels:
    cluster.open-cluster-management.io/backup: cluster-activation

There are also default resources in the activation set that are backed up by the acm-managed-clusters-schedule resource. View the following default resources that are restored by the acm-managed-clusters-schedule resource:

For both active and passive hub clusters:

For passive hub clusters:

The cluster backup and restore operator can be enabled when the MultiClusterHub resource is created for the first time. The cluster-backup parameter is set to true. When the operator is enabled, the operator resources are installed.

If the MultiClusterHub resource is already created, you can install or uninstall the cluster backup operator by editing the MultiClusterHub resource. Set cluster-backup to false, if you want to uninstall the cluster backup operator.

When the backup and restore operator is enabled, your MultiClusterHub resource might resemble the following YAML file:

apiVersion: operator.open-cluster-management.io/v1
  kind: MultiClusterHub
  metadata:
    name: multiclusterhub
    namespace: open-cluster-management
  spec:
    availabilityConfig: High
    enableClusterBackup: false
    imagePullSecret: multiclusterhub-operator-pull-secret
    ingress:
      sslCiphers:
        - ECDHE-ECDSA-AES256-GCM-SHA384
        - ECDHE-RSA-AES256-GCM-SHA384
        - ECDHE-ECDSA-AES128-GCM-SHA256
        - ECDHE-RSA-AES128-GCM-SHA256
    overrides:
      components:
        - enabled: true
          name: multiclusterhub-repo
        - enabled: true
          name: search
        - enabled: true
          name: management-ingress
        - enabled: true
          name: console
        - enabled: true
          name: insights
        - enabled: true
          name: grc
        - enabled: true
          name: cluster-lifecycle
        - enabled: true
          name: volsync
        - enabled: true
          name: multicluster-engine
        - enabled: false
          name: cluster-proxy-addon
        - enabled: true <<<<<<<<
          name: cluster-backup
    separateCertificateManagement: false

Complete the following steps to schedule and restore backups:

Use the following command to get information about restore events:

oc describe -n <oadp-n> <restore-name>

Your list of events might resemble the following sample:

Spec:
  Cleanup Before Restore:               CleanupRestored
  Restore Sync Interval:                4m
  Sync Restore With New Backups:        true
  Velero Credentials Backup Name:       latest
  Velero Managed Clusters Backup Name:  skip
  Velero Resources Backup Name:         latest
Status:
  Last Message:                     Velero restores have run to completion, restore will continue to sync with new backups
  Phase:                            Enabled
  Velero Credentials Restore Name:  example-acm-credentials-schedule-20220406171919
  Velero Resources Restore Name:    example-acm-resources-schedule-20220406171920
Events:
  Type    Reason                   Age   From                Message
  ----    ------                   ----  ----                -------
  Normal  Prepare to restore:      76m   Restore controller  Cleaning up resources for backup acm-credentials-hive-schedule-20220406155817
  Normal  Prepare to restore:      76m   Restore controller  Cleaning up resources for backup acm-credentials-cluster-schedule-20220406155817
  Normal  Prepare to restore:      76m   Restore controller  Cleaning up resources for backup acm-credentials-schedule-20220406155817
  Normal  Prepare to restore:      76m   Restore controller  Cleaning up resources for backup acm-resources-generic-schedule-20220406155817
  Normal  Prepare to restore:      76m   Restore controller  Cleaning up resources for backup acm-resources-schedule-20220406155817
  Normal  Velero restore created:  74m   Restore controller  example-acm-credentials-schedule-20220406155817
  Normal  Velero restore created:  74m   Restore controller  example-acm-resources-generic-schedule-20220406155817
  Normal  Velero restore created:  74m   Restore controller  example-acm-resources-schedule-20220406155817
  Normal  Velero restore created:  74m   Restore controller  example-acm-credentials-cluster-schedule-20220406155817
  Normal  Velero restore created:  74m   Restore controller  example-acm-credentials-hive-schedule-20220406155817
  Normal  Prepare to restore:      64m   Restore controller  Cleaning up resources for backup acm-resources-schedule-20220406165328
  Normal  Prepare to restore:      62m   Restore controller  Cleaning up resources for backup acm-credentials-hive-schedule-20220406165328
  Normal  Prepare to restore:      62m   Restore controller  Cleaning up resources for backup acm-credentials-cluster-schedule-20220406165328
  Normal  Prepare to restore:      62m   Restore controller  Cleaning up resources for backup acm-credentials-schedule-20220406165328
  Normal  Prepare to restore:      62m   Restore controller  Cleaning up resources for backup acm-resources-generic-schedule-20220406165328
  Normal  Velero restore created:  61m   Restore controller  example-acm-credentials-cluster-schedule-20220406165328
  Normal  Velero restore created:  61m   Restore controller  example-acm-credentials-schedule-20220406165328
  Normal  Velero restore created:  61m   Restore controller  example-acm-resources-generic-schedule-20220406165328
  Normal  Velero restore created:  61m   Restore controller  example-acm-resources-schedule-20220406165328
  Normal  Velero restore created:  61m   Restore controller  example-acm-credentials-hive-schedule-20220406165328
  Normal  Prepare to restore:      38m   Restore controller  Cleaning up resources for backup acm-resources-generic-schedule-20220406171920
  Normal  Prepare to restore:      38m   Restore controller  Cleaning up resources for backup acm-resources-schedule-20220406171920
  Normal  Prepare to restore:      36m   Restore controller  Cleaning up resources for backup acm-credentials-hive-schedule-20220406171919
  Normal  Prepare to restore:      36m   Restore controller  Cleaning up resources for backup acm-credentials-cluster-schedule-20220406171919
  Normal  Prepare to restore:      36m   Restore controller  Cleaning up resources for backup acm-credentials-schedule-20220406171919
  Normal  Velero restore created:  36m   Restore controller  example-acm-credentials-cluster-schedule-20220406171919
  Normal  Velero restore created:  36m   Restore controller  example-acm-credentials-schedule-20220406171919
  Normal  Velero restore created:  36m   Restore controller  example-acm-resources-generic-schedule-20220406171920
  Normal  Velero restore created:  36m   Restore controller  example-acm-resources-schedule-20220406171920
  Normal  Velero restore created:  36m   Restore controller  example-acm-credentials-hive-schedule-20220406171919

See Restore a backup for a description of the required specification properties and the valid options.