This topic describes the management of user accounts, including how new user accounts are created in OpenShift Enterprise and how they can be deleted.

After new users log in to OpenShift Enterprise, an account is created for that user per the identity provider configured on the master. The cluster administrator can manage the access level of each user.

OpenShift Enterprise user configuration is stored in several locations within OpenShift Enterprise. Regardless of the identity provider, OpenShift Enterprise internally stores details like role-based access control (RBAC) information and group membership. To completely remove user information, this data must be removed in addition to the user account.

In OpenShift Enterprise, two object types contain user data outside the identification provider: user and identity.

To get the current list of users:

$ oc get user
NAME      UID                                    FULL NAME   IDENTITIES
demo     75e4b80c-dbf1-11e5-8dc6-0e81e52cc949               htpasswd_auth:demo

To get the current list of identities:

$ oc get identity
NAME                  IDP NAME        IDP USER NAME   USER NAME   USER UID
htpasswd_auth:demo    htpasswd_auth   demo            demo        75e4b80c-dbf1-11e5-8dc6-0e81e52cc949

Note the matching UID between the two object types. If you attempt to change the authentication provider after starting to use OpenShift Enterprise, the user names that overlap will not work because of the entries in the identity list, which will still point to the old authentication method.

To delete a user:

After you complete these steps, a new account will be created in OpenShift Enterprise when the user logs in again.

If your intention is to prevent the user from being able to log in again (for example, if an employee has left the company and you want to permanently delete the account), you can also remove the user from your authentication back end (like htpasswd, kerberos, or others) for the configured identity provider.

For example, if you are using htpasswd, delete the entry in the htpasswd file that is configured for OpenShift Enterprise with the user name and password.

For external identification management like Lightweight Directory Access Protocol (LDAP) or Internet Download Manager (IDM), use the user management tools to remove the user entry.

You can manage nodes in your instance using the CLI.

When you perform node management operations, the CLI interacts with node objects that are representations of actual node hosts. The master uses the information from node objects to validate nodes with health checks.

To list all nodes that are known to the master:

$ oc get nodes
NAME                 LABELS                                        STATUS
node1.example.com    kubernetes.io/hostname=node1.example.com      Ready
node2.example.com    kubernetes.io/hostname=node2.example.com      Ready

To only list information about a single node, replace <node> with the full node name:

$ oc get node <node>

The STATUS column in the output of these commands can show nodes with the following conditions:

To get more detailed information about a specific node, including the reason for the current condition:

$ oc describe node <node>

For example:

$ oc describe node node1.example.com
Name:			node1.example.com
Labels:			kubernetes.io/hostname=node1.example.com
CreationTimestamp:	Wed, 10 Jun 2015 17:22:34 +0000
Conditions:
  Type		Status	LastHeartbeatTime			LastTransitionTime			Reason					Message
  Ready 	True 	Wed, 10 Jun 2015 19:56:16 +0000 	Wed, 10 Jun 2015 17:22:34 +0000 	kubelet is posting ready status
Addresses:	127.0.0.1
Capacity:
 memory:	1017552Ki
 pods:		100
 cpu:		2
Version:
 Kernel Version:		3.17.4-301.fc21.x86_64
 OS Image:			Fedora 21 (Twenty One)
 Container Runtime Version:	docker://1.6.0
 Kubelet Version:		v0.17.1-804-g496be63
 Kube-Proxy Version:		v0.17.1-804-g496be63
ExternalID:			node1.example.com
Pods:				(2 in total)
  docker-registry-1-9yyw5
  router-1-maytv
No events.

To add nodes to your existing OpenShift cluster, you can run an Ansible playbook that handles installing the node components, generating the required certificates, and other important steps. See the advanced installation method for instructions on running the playbook directly.

Alternatively, if you used the quick installation method, you can re-run the installer to add nodes, which performs the same steps.

When you delete a node using the CLI, the node object is deleted in Kubernetes, but the pods that exist on the node itself are not deleted. Any bare pods not backed by a replication controller would be inaccessible to OpenShift Enterprise, pods backed by replication controllers would be rescheduled to other available nodes, and local manifest pods would need to be manually deleted.

To delete a node from the OpenShift Enterprise cluster:

To add or update labels on a node:

$ oc label node <node> <key_1>=<value_1> ... <key_n>=<value_n>

To see more detailed usage:

$ oc label -h

To list all or selected pods on one or more nodes:

$ oadm manage-node <node1> <node2> \
    --list-pods [--pod-selector=<pod_selector>] [-o json|yaml]

To list all or selected pods on selected nodes:

$ oadm manage-node --selector=<node_selector> \
    --list-pods [--pod-selector=<pod_selector>] [-o json|yaml]

By default, healthy nodes with a Ready status are marked as schedulable, meaning that new pods are allowed for placement on the node. Manually marking a node as unschedulable blocks any new pods from being scheduled on the node. Existing pods on the node are not affected.

To mark a node or nodes as unschedulable:

$ oadm manage-node <node1> <node2> --schedulable=false

For example:

$ oadm manage-node node1.example.com --schedulable=false
NAME                 LABELS                                        STATUS
node1.example.com    kubernetes.io/hostname=node1.example.com      Ready,SchedulingDisabled

To mark a currently unschedulable node or nodes as schedulable:

$ oadm manage-node <node1> <node2> --schedulable

Alternatively, instead of specifying specific node names (e.g., <node1> <node2>), you can use the --selector=<node_selector> option to mark selected nodes as schedulable or unschedulable.

Evacuating pods allows you to migrate all or selected pods from a given node or nodes. Nodes must first be marked unschedulable to perform pod evacuation.

Only pods backed by a replication controller can be evacuated; the replication controllers create new pods on other nodes and remove the existing pods from the specified node(s). Bare pods, meaning those not backed by a replication controller, are unaffected by default. You can evacuate a subset of pods by specifying a pod-selector. Pod selector is based on labels, so all the pods with the specified label will be evacuated.

To list pods that will be migrated without actually performing the evacuation, use the --dry-run option:

$ oadm manage-node <node1> <node2> \
    --evacuate --dry-run [--pod-selector=<pod_selector>]

To actually evacuate all or selected pods on one or more nodes:

$ oadm manage-node <node1> <node2> \
    --evacuate [--pod-selector=<pod_selector>]

You can force deletion of bare pods by using the --force option:

$ oadm manage-node <node1> <node2> \
    --evacuate --force [--pod-selector=<pod_selector>]

Alternatively, instead of specifying specific node names (e.g., <node1> <node2>), you can use the --selector=<node_selector> option to evacuate pods on selected nodes.

You can configure node resources by adding kubelet arguments to the node configuration file (/etc/origin/node/node-config.yaml). Add the kubeletArguments section and include any desired options:

kubeletArguments:
  max-pods: 1
    - "40"
  resolv-conf: 2
    - "/etc/resolv.conf"
  image-gc-high-threshold: 3
    - "90"
  image-gc-low-threshold: 4
    - "80"

To view all available kubelet options:

$ kubelet -h

This can also be set during an advanced installation using the openshift_node_kubelet_args variable. For example:

openshift_node_kubelet_args={'max-pods': ['40'], 'resolv-conf': ['/etc/resolv.conf'],  'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']}

By default, DNS routes all node traffic. During node registration, the master receives the node IP addresses from the DNS configuration, and therefore accessing nodes via DNS is the most flexible solution for most deployments.

If your deployment is using a cloud provider, then the node gets the IP information from the cloud provider. However, openshift-sdn attempts to determine the IP through a variety of methods, including a DNS lookup on the nodeName (if set), or on the system hostname (if nodeName is not set).

However, you may need to change the node traffic interface. For example, where:

Configuring the openshift_node_set_node_ip Ansible variable forces node traffic through an interface other than the default network interface.

To change the node traffic interface:

When a person uses the command line or web console, their API token authenticates them to the OpenShift API. However, when a regular user’s credentials are not available, it is common for components to make API calls independently. For example:

Service accounts provide a flexible way to control API access without sharing a regular user’s credentials.

Every service account has an associated username that can be granted roles, just like a regular user. The username is derived from its project and name: system:serviceaccount:<project>:<name>

For example, to add the view role to the robot service account in the top-secret project:

$ oc policy add-role-to-user view system:serviceaccount:top-secret:robot

Every service account is also a member of two groups:

For example, to allow all service accounts in all projects to view resources in the top-secret project:

$ oc policy add-role-to-group view system:serviceaccounts -n top-secret

To allow all service accounts in the managers project to edit resources in the top-secret project:

$ oc policy add-role-to-group edit system:serviceaccounts:managers -n top-secret

Service accounts authenticate to the API using tokens signed by a private RSA key. The authentication layer verifies the signature using a matching public RSA key.

To enable service account token generation, update the master configurationserviceAccountConfig stanza to specify a privateKeyFile (for signing), and a matching public key file in the publicKeyFiles list:

serviceAccountConfig:
  ...
  masterCA: ca.crt 1
  privateKeyFile: serviceaccounts.private.key 2
  publicKeyFiles:
  - serviceaccounts.public.key 3
  - ...

Service accounts are required in each project to run builds, deployments, and other pods. The managedNames setting in the master configuration file controls which service accounts are automatically created in every project:

serviceAccountConfig:
  ...
  managedNames: 1
  - builder 2
  - deployer 3
  - default 4
  - ...

All service accounts in a project are given the system:image-puller role, which allows pulling images from any image stream in the project using the internal Docker registry.

Several infrastructure controllers run using service account credentials. The following service accounts are created in the OpenShift infrastructure namespace at server start, and given the following roles cluster-wide:

To configure the namespace where those service accounts are created, set the openshiftInfrastructureNamespace field in the master configuration file:

policyConfig:
  ...
  openshiftInfrastructureNamespace: openshift-infra

Set the limitSecretReferences field in the /etc/origin/master/master-config.yml file on the master to true to require pod secret references to be whitelisted by their service accounts. Set its value to false to allow pods to reference any secret in the project.

serviceAccountConfig:
  ...
  limitSecretReferences: false

You can use the CLI to view authorization policies and the administrator CLI to manage the roles and bindings within a policy.

Roles grant various levels of access in the system-wide cluster policy as well as project-scoped local policies. Users and groups can be associated with, or bound to, multiple roles at the same time. You can view details about the roles and their bindings using the oc describe command.

Users with the cluster-admindefault role in the cluster policy can view cluster policy and all local policies. Users with the admindefault role in a given local policy can view that project-scoped policy.

$ oc describe clusterPolicy default

$ oc describe clusterPolicy default
Name:					default
Created:				5 days ago
Labels:					<none>
Annotations:				<none>
Last Modified:				2016-03-17 13:25:27 -0400 EDT
admin					Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[create delete deletecollection get list patch update watch]	[]				[]			[]				[configmaps endpoints persistentvolumeclaims pods pods/attach pods/exec pods/log pods/portforward pods/proxy replicationcontrollers replicationcontrollers/scale secrets serviceaccounts services services/proxy]
					[create delete deletecollection get list patch update watch]	[]				[]			[]				[buildconfigs buildconfigs/instantiate buildconfigs/instantiatebinary buildconfigs/webhooks buildlogs builds builds/clone builds/custom builds/docker builds/log builds/source deploymentconfigrollbacks deploymentconfigs deploymentconfigs/log deploymentconfigs/scale deployments generatedeploymentconfigs imagestreamimages imagestreamimports imagestreammappings imagestreams imagestreams/secrets imagestreamtags localresourceaccessreviews localsubjectaccessreviews processedtemplates projects resourceaccessreviews rolebindings roles routes subjectaccessreviews templateconfigs templates]
					[create delete deletecollection get list patch update watch]	[]				[]			[autoscaling]			[horizontalpodautoscalers]
					[create delete deletecollection get list patch update watch]	[]				[]			[batch]				[jobs]
					[create delete deletecollection get list patch update watch]	[]				[]			[extensions]			[daemonsets horizontalpodautoscalers jobs replicationcontrollers/scale]
					[get list watch]						[]				[]			[]				[bindings configmaps endpoints events imagestreams/status limitranges minions namespaces namespaces/status nodes persistentvolumeclaims persistentvolumes pods pods/log pods/status policies policybindings replicationcontrollers replicationcontrollers/status resourcequotas resourcequotas/status resourcequotausages routes/status securitycontextconstraints serviceaccounts services]
					[get update]							[]				[]			[]				[imagestreams/layers]
					[update]							[]				[]			[]				[routes/status]
basic-user				Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get]								[]				[~]			[]				[users]
					[list]								[]				[]			[]				[projectrequests]
					[get list]							[]				[]			[]				[clusterroles]
					[list]								[]				[]			[]				[projects]
					[create]							[]				IsPersonalSubjectAccessReview	[]			[]				[localsubjectaccessreviews subjectaccessreviews]
cluster-admin				Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[*]								[]				[]			[*]				[*]
					[*]								[*]				[]			[]				[]
cluster-reader				Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get list watch]						[]				[]			[]				[bindings buildconfigs buildconfigs/instantiate buildconfigs/instantiatebinary buildconfigs/webhooks buildlogs builds builds/clone builds/details builds/log clusternetworks clusterpolicies clusterpolicybindings clusterrolebindings clusterroles configmaps deploymentconfigrollbacks deploymentconfigs deploymentconfigs/log deploymentconfigs/scale deployments endpoints events generatedeploymentconfigs groups hostsubnets identities images imagestreamimages imagestreamimports imagestreammappings imagestreams imagestreams/status imagestreamtags limitranges localresourceaccessreviews localsubjectaccessreviews minions namespaces netnamespaces nodes oauthclientauthorizations oauthclients persistentvolumeclaims persistentvolumes pods pods/log policies policybindings processedtemplates projectrequests projects replicationcontrollers resourceaccessreviews resourcequotas resourcequotausages rolebindings roles routes routes/status securitycontextconstraints serviceaccounts services subjectaccessreviews templateconfigs templates useridentitymappings users]
					[get list watch]						[]				[]			[autoscaling]			[horizontalpodautoscalers]
					[get list watch]						[]				[]			[batch]				[jobs]
					[get list watch]						[]				[]			[extensions]			[daemonsets horizontalpodautoscalers jobs replicationcontrollers/scale]
					[create]							[]				[]			[]				[resourceaccessreviews subjectaccessreviews]
					[get]								[]				[]			[]				[nodes/metrics]
					[create get]							[]				[]			[]				[nodes/stats]
					[get]								[*]				[]			[]				[]
cluster-status				Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get]								[/api /api/* /apis /apis/* /healthz /healthz/* /oapi /oapi/* /osapi /osapi/ /version]					[]			[]		[]
edit					Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[create delete deletecollection get list patch update watch]	[]				[]			[]				[configmaps endpoints persistentvolumeclaims pods pods/attach pods/exec pods/log pods/portforward pods/proxy replicationcontrollers replicationcontrollers/scale secrets serviceaccounts services services/proxy]
					[create delete deletecollection get list patch update watch]	[]				[]			[]				[buildconfigs buildconfigs/instantiate buildconfigs/instantiatebinary buildconfigs/webhooks buildlogs builds builds/clone builds/custom builds/docker builds/log builds/source deploymentconfigrollbacks deploymentconfigs deploymentconfigs/log deploymentconfigs/scale deployments generatedeploymentconfigs imagestreamimages imagestreamimports imagestreammappings imagestreams imagestreams/secrets imagestreamtags processedtemplates routes templateconfigs templates]
					[create delete deletecollection get list patch update watch]	[]				[]			[autoscaling]			[horizontalpodautoscalers]
					[create delete deletecollection get list patch update watch]	[]				[]			[batch]				[jobs]
					[create delete deletecollection get list patch update watch]	[]				[]			[extensions]			[daemonsets horizontalpodautoscalers jobs replicationcontrollers/scale]
					[get list watch]						[]				[]			[]				[bindings configmaps endpoints events imagestreams/status limitranges minions namespaces namespaces/status nodes persistentvolumeclaims persistentvolumes pods pods/log pods/status projects replicationcontrollers replicationcontrollers/status resourcequotas resourcequotas/status resourcequotausages routes/status securitycontextconstraints serviceaccounts services]
					[get update]							[]				[]			[]				[imagestreams/layers]
registry-admin				Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[create delete deletecollection get list patch update watch]	[]				[]			[]				[imagestreamimages imagestreamimports imagestreammappings imagestreams imagestreams/secrets imagestreamtags]
					[create delete deletecollection get list patch update watch]	[]				[]			[]				[localresourceaccessreviews localsubjectaccessreviews resourceaccessreviews rolebindings roles subjectaccessreviews]
					[get update]							[]				[]			[]				[imagestreams/layers]
					[get list watch]						[]				[]			[]				[policies policybindings]
					[get]								[]				[]			[]				[namespaces projects]
registry-editor				Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get]								[]				[]			[]				[namespaces projects]
					[create delete deletecollection get list patch update watch]	[]				[]			[]				[imagestreamimages imagestreamimports imagestreammappings imagestreams imagestreams/secrets imagestreamtags]
					[get update]							[]				[]			[]				[imagestreams/layers]
registry-viewer				Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get list watch]						[]				[]			[]				[imagestreamimages imagestreamimports imagestreammappings imagestreams imagestreamtags]
					[get]								[]				[]			[]				[imagestreams/layers namespaces projects]
self-provisioner			Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[create]							[]				[]			[]				[projectrequests]
system:build-controller			Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get list watch]						[]				[]			[]				[builds]
					[update]							[]				[]			[]				[builds]
					[create]							[]				[]			[]				[builds/custom builds/docker builds/source]
					[get]								[]				[]			[]				[imagestreams]
					[create delete get list]					[]				[]			[]				[pods]
					[create patch update]						[]				[]			[]				[events]
system:daemonset-controller		Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[list watch]							[]				[]			[extensions]			[daemonsets]
					[list watch]							[]				[]			[]				[pods]
					[list watch]							[]				[]			[]				[nodes]
					[update]							[]				[]			[extensions]			[daemonsets/status]
					[create delete]							[]				[]			[]				[pods]
					[create]							[]				[]			[]				[pods/binding]
					[create patch update]						[]				[]			[]				[events]
system:deployer				Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get list]							[]				[]			[]				[replicationcontrollers]
					[get update]							[]				[]			[]				[replicationcontrollers]
					[create get list watch]						[]				[]			[]				[pods]
					[get]								[]				[]			[]				[pods/log]
					[update]							[]				[]			[]				[imagestreamtags]
system:deployment-controller		Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[list watch]							[]				[]			[]				[replicationcontrollers]
					[get update]							[]				[]			[]				[replicationcontrollers]
					[create delete get list update]					[]				[]			[]				[pods]
					[create patch update]						[]				[]			[]				[events]
system:discovery			Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get]								[/api /api/* /apis /apis/* /oapi /oapi/* /osapi /osapi/ /version]							[]			[]			[]
system:hpa-controller			Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get list watch]						[]				[]			[extensions autoscaling]	[horizontalpodautoscalers]
					[update]							[]				[]			[extensions autoscaling]	[horizontalpodautoscalers/status]
					[get update]							[]				[]			[extensions ]			[replicationcontrollers/scale]
					[get update]							[]				[]			[]				[deploymentconfigs/scale]
					[create patch update]						[]				[]			[]				[events]
					[list]								[]				[]			[]				[pods]
					[proxy]								[]				[https:heapster:]	[]				[services]
system:image-builder			Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get update]							[]				[]			[]				[imagestreams/layers]
					[update]							[]				[]			[]				[builds/details]
system:image-pruner			Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[delete]							[]				[]			[]				[images]
					[get list]							[]				[]			[]				[buildconfigs builds deploymentconfigs images imagestreams pods replicationcontrollers]
					[update]							[]				[]			[]				[imagestreams/status]
system:image-puller			Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get]								[]				[]			[]				[imagestreams/layers]
system:image-pusher			Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get update]							[]				[]			[]				[imagestreams/layers]
system:job-controller			Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[list watch]							[]				[]			[extensions batch]		[jobs]
					[update]							[]				[]			[extensions batch]		[jobs/status]
					[list watch]							[]				[]			[]				[pods]
					[create delete]							[]				[]			[]				[pods]
					[create patch update]						[]				[]			[]				[events]
system:master				Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[*]								[]				[]			[*]				[*]
system:namespace-controller		Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[delete get list watch]						[]				[]			[]				[namespaces]
					[update]							[]				[]			[]				[namespaces/finalize namespaces/status]
					[delete deletecollection get list]				[]				[]			[*]				[*]
system:node				Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[create]							[]				[]			[]				[localsubjectaccessreviews subjectaccessreviews]
					[get list watch]						[]				[]			[]				[services]
					[create get list watch]						[]				[]			[]				[nodes]
					[update]							[]				[]			[]				[nodes/status]
					[create patch update]						[]				[]			[]				[events]
					[get list watch]						[]				[]			[]				[pods]
					[create delete get]						[]				[]			[]				[pods]
					[update]							[]				[]			[]				[pods/status]
					[get]								[]				[]			[]				[configmaps secrets]
					[get]								[]				[]			[]				[persistentvolumeclaims persistentvolumes]
					[get]								[]				[]			[]				[endpoints]
system:node-admin			Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get list watch]						[]				[]			[]				[nodes]
					[proxy]								[]				[]			[]				[nodes]
					[*]								[]				[]			[]				[nodes/log nodes/metrics nodes/proxy nodes/stats]
system:node-proxier			Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[list watch]							[]				[]			[]				[endpoints services]
system:node-reader			Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get list watch]						[]				[]			[]				[nodes]
					[get]								[]				[]			[]				[nodes/metrics]
					[create get]							[]				[]			[]				[nodes/stats]
system:oauth-token-deleter		Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[delete]							[]				[]			[]				[oauthaccesstokens oauthauthorizetokens]
system:pv-binder-controller		Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[list watch]							[]				[]			[]				[persistentvolumes]
					[create delete get update]					[]				[]			[]				[persistentvolumes]
					[update]							[]				[]			[]				[persistentvolumes/status]
					[list watch]							[]				[]			[]				[persistentvolumeclaims]
					[get update]							[]				[]			[]				[persistentvolumeclaims]
					[update]							[]				[]			[]				[persistentvolumeclaims/status]
system:pv-provisioner-controller	Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[list watch]							[]				[]			[]				[persistentvolumes]
					[create delete get update]					[]				[]			[]				[persistentvolumes]
					[update]							[]				[]			[]				[persistentvolumes/status]
					[list watch]							[]				[]			[]				[persistentvolumeclaims]
					[get update]							[]				[]			[]				[persistentvolumeclaims]
					[update]							[]				[]			[]				[persistentvolumeclaims/status]
system:pv-recycler-controller		Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[list watch]							[]				[]			[]				[persistentvolumes]
					[create delete get update]					[]				[]			[]				[persistentvolumes]
					[update]							[]				[]			[]				[persistentvolumes/status]
					[list watch]							[]				[]			[]				[persistentvolumeclaims]
					[get update]							[]				[]			[]				[persistentvolumeclaims]
					[update]							[]				[]			[]				[persistentvolumeclaims/status]
					[list watch]							[]				[]			[]				[pods]
					[create delete get]						[]				[]			[]				[pods]
					[create patch update]						[]				[]			[]				[events]
system:registry				Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[delete get]							[]				[]			[]				[images]
					[get]								[]				[]			[]				[imagestreamimages imagestreams imagestreams/secrets imagestreamtags]
					[update]							[]				[]			[]				[imagestreams]
					[create]							[]				[]			[]				[imagestreammappings]
					[list]								[]				[]			[]				[resourcequotas]
system:replication-controller		Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[list watch]							[]				[]			[]				[replicationcontrollers]
					[get update]							[]				[]			[]				[replicationcontrollers]
					[update]							[]				[]			[]				[replicationcontrollers/status]
					[list watch]							[]				[]			[]				[pods]
					[create delete]							[]				[]			[]				[pods]
					[create patch update]						[]				[]			[]				[events]
system:router				Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[list watch]							[]				[]			[]				[endpoints routes]
					[update]							[]				[]			[]				[routes/status]
system:sdn-manager			Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[create delete get list watch]					[]				[]			[]				[hostsubnets]
					[create delete get list watch]					[]				[]			[]				[netnamespaces]
					[get list watch]						[]				[]			[]				[nodes]
					[create get]							[]				[]			[]				[clusternetworks]
system:sdn-reader			Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get list watch]						[]				[]			[]				[hostsubnets]
					[get list watch]						[]				[]			[]				[netnamespaces]
					[get list watch]						[]				[]			[]				[nodes]
					[get]								[]				[]			[]				[clusternetworks]
					[get list watch]						[]				[]			[]				[namespaces]
system:webhook				Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[create get]							[]				[]			[]				[buildconfigs/webhooks]
view					Verbs								Non-Resource URLs		Extension			Resource Names		API Groups			Resources
					[get list watch]						[]				[]			[]				[bindings buildconfigs buildconfigs/instantiate buildconfigs/instantiatebinary buildconfigs/webhooks buildlogs builds builds/clone builds/log configmaps deploymentconfigrollbacks deploymentconfigs deploymentconfigs/log deploymentconfigs/scale deployments endpoints events generatedeploymentconfigs imagestreamimages imagestreamimports imagestreammappings imagestreams imagestreams/status imagestreamtags limitranges minions namespaces namespaces/status nodes persistentvolumeclaims persistentvolumes pods pods/log pods/status processedtemplates projects replicationcontrollers replicationcontrollers/status resourcequotas resourcequotas/status resourcequotausages routes routes/status securitycontextconstraints serviceaccounts services templateconfigs templates]
					[get list watch]						[]				[]			[autoscaling]			[horizontalpodautoscalers]
					[get list watch]						[]				[]			[batch]				[jobs]
					[get list watch]						[]				[]			[extensions]			[daemonsets horizontalpodautoscalers jobs]

$ oc describe clusterPolicyBindings :default

$ oc describe clusterPolicyBindings :default
Name:						:default
Created:					4 hours ago
Labels:						<none>
Last Modified:					2015-06-10 17:22:26 +0000 UTC
Policy:						<none>
RoleBinding[basic-users]:
						Role:	basic-user
						Users:	[]
						Groups:	[system:authenticated]
RoleBinding[cluster-admins]:
						Role:	cluster-admin
						Users:	[]
						Groups:	[system:cluster-admins]
RoleBinding[cluster-readers]:
						Role:	cluster-reader
						Users:	[]
						Groups:	[system:cluster-readers]
RoleBinding[cluster-status-binding]:
						Role:	cluster-status
						Users:	[]
						Groups:	[system:authenticated system:unauthenticated]
RoleBinding[self-provisioners]:
						Role:	self-provisioner
						Users:	[]
						Groups:	[system:authenticated]
RoleBinding[system:build-controller]:
						Role:	system:build-controller
						Users:	[system:serviceaccount:openshift-infra:build-controller]
						Groups:	[]
RoleBinding[system:deployment-controller]:
						Role:	system:deployment-controller
						Users:	[system:serviceaccount:openshift-infra:deployment-controller]
						Groups:	[]
RoleBinding[system:masters]:
						Role:	system:master
						Users:	[]
						Groups:	[system:masters]
RoleBinding[system:node-proxiers]:
						Role:	system:node-proxier
						Users:	[]
						Groups:	[system:nodes]
RoleBinding[system:nodes]:
						Role:	system:node
						Users:	[]
						Groups:	[system:nodes]
RoleBinding[system:oauth-token-deleters]:
						Role:	system:oauth-token-deleter
						Users:	[]
						Groups:	[system:authenticated system:unauthenticated]
RoleBinding[system:registrys]:
						Role:	system:registry
						Users:	[]
						Groups:	[system:registries]
RoleBinding[system:replication-controller]:
						Role:	system:replication-controller
						Users:	[system:serviceaccount:openshift-infra:replication-controller]
						Groups:	[]
RoleBinding[system:routers]:
						Role:	system:router
						Users:	[]
						Groups:	[system:routers]
RoleBinding[system:sdn-readers]:
						Role:	system:sdn-reader
						Users:	[]
						Groups:	[system:nodes]
RoleBinding[system:webhooks]:
						Role:	system:webhook
						Users:	[]
						Groups:	[system:authenticated system:unauthenticated]

$ oc describe policyBindings :default

$ oc describe policyBindings :default -n joe-project
Name:					:default
Created:				About a minute ago
Labels:					<none>
Last Modified:				2015-06-10 21:55:06 +0000 UTC
Policy:					<none>
RoleBinding[admins]:
					Role:	admin
					Users:	[joe]
					Groups:	[]
RoleBinding[system:deployers]:
					Role:	system:deployer
					Users:	[system:serviceaccount:joe-project:deployer]
					Groups:	[]
RoleBinding[system:image-builders]:
					Role:	system:image-builder
					Users:	[system:serviceaccount:joe-project:builder]
					Groups:	[]
RoleBinding[system:image-pullers]:
					Role:	system:image-puller
					Users:	[]
					Groups:	[system:serviceaccounts:joe-project]

Adding, or binding, a role to users or groups gives the user or group the relevant access granted by the role. You can add and remove roles to and from users and groups using oadm policy commands.

When managing a user or group’s associated roles for a local policy using the following operations, a project may be specified with the -n flag. If it is not specified, then the current project is used.

You can also manage role bindings for the cluster policy using the following operations. The -n flag is not used for these operations because the cluster policy uses non-namespaced resources.

For example, you can add the admin role to the alice user in joe-project by running:

$ oadm policy add-role-to-user admin alice -n joe-project

You can then view the local bindings and verify the addition in the output:

$ oc describe policyBindings :default -n joe-project
Name:					:default
Created:				5 minutes ago
Labels:					<none>
Last Modified:				2015-06-10 22:00:44 +0000 UTC
Policy:					<none>
RoleBinding[admins]:
					Role:	admin
					Users:	[alice joe] 1
					Groups:	[]
RoleBinding[system:deployers]:
					Role:	system:deployer
					Users:	[system:serviceaccount:joe-project:deployer]
					Groups:	[]
RoleBinding[system:image-builders]:
					Role:	system:image-builder
					Users:	[system:serviceaccount:joe-project:builder]
					Groups:	[]
RoleBinding[system:image-pullers]:
					Role:	system:image-puller
					Users:	[]
					Groups:	[system:serviceaccounts:joe-project]

Security context constraints allow administrators to control permissions for pods. To learn more about this API type please refer to the security context constraints (SCCs) architecture documentation. You may manage SCCs in your instance as normal API objects using the CLI.

To get a current list of SCCs:

$ oc get scc
NAME         PRIV      CAPS      HOSTDIR   SELINUX     RUNASUSER
privileged   true      []        true      RunAsAny    RunAsAny
restricted   false     []        false     MustRunAs   MustRunAsRange

To examine a particular SCC, use oc get, oc describe, oc export, or oc edit.

$ oc describe scc restricted

Name:						restricted
Priority:					<none>
Access:
  Users:					<none>
  Groups:					system:authenticated
Settings:
  Allow Privileged:				false
  Default Add Capabilities:			<none>
  Required Drop Capabilities:			<none>
  Allowed Capabilities:				<none>
  Allowed Volume Types:				awsElasticBlockStore,azureFile,cephFS,cinder,configMap,downwardAPI,emptyDir,fc,flexVolume,flocker,gcePersistentDisk,gitRepo,glusterfs,iscsi,nfs,persistentVolumeClaim,rbd,secret
  Allow Host Network:				false
  Allow Host Ports:				false
  Allow Host PID:				false
  Allow Host IPC:				false
  Read Only Root Filesystem:			false
  Run As User Strategy: MustRunAsRange
    UID:					<none>
    UID Range Min:				<none>
    UID Range Max:				<none>
  SELinux Context Strategy: MustRunAs
    User:					<none>
    Role:					<none>
    Type:					<none>
    Level:					<none>
  FSGroup Strategy: RunAsAny
    Ranges:					<none>
  Supplemental Groups Strategy: RunAsAny
    Ranges:					<none>

To create a new SCC:

To delete an SCC:

$ oc delete scc <scc_name>

To update an existing SCC:

$ oc edit scc <scc_name>

Default SCCs will be created when the master is started if they are missing. To reset SCCs to defaults, or update existing SCCs to new default definitions after an upgrade you may:

The oadm policy reconcile-sccs command will set all SCC policies to the default values but retain any additional users and groups as well as priorities you may have already set. To view which SCCs will be changed you may run the command with no options or by specifying your preferred output with the -o <format> option.

After reviewing it is recommended that you back up your existing SCCs and then use the --confirm option to persist the data.

The following describe common scenarios and procedures using SCCs.

$ oadm policy add-scc-to-user privileged e2e-user

$ cat <<EOF | oc create -n My_Project -f -
kind: ServiceAccount
apiVersion: v1
metadata:
  name: My_SVCACCT 1
EOF

$ oc edit scc privileged

   - system:serviceaccount:My_Project:My_SVCACCT

$ oadm policy add-scc-to-user anyuid system:serviceaccount:myproject:mysvcacct

setcap cap_net_raw,cap_net_admin+p /usr/bin/ping

$ oadm policy add-scc-to-user <scc_name> <user_name>

$ oadm policy add-scc-to-group <scc_name> <group_name>

The Kubernetes pod scheduler is responsible for determining placement of new pods onto nodes within the cluster. It reads data from the pod and tries to find a node that is a good fit based on configured policies. It is completely independent and exists as a standalone/pluggable solution. It does not modify the pod and just creates a binding for the pod that ties the pod to the particular node.

The existing generic scheduler is the default platform-provided scheduler "engine" that selects a node to host the pod in a 3-step operation:

There are several predicates provided out of the box in Kubernetes. Some of these predicates can be customized by providing certain parameters. Multiple predicates can be combined to provide additional filtering of nodes.

{"name" : "PodFitsPorts"}

{"name" : "PodFitsResources"}

{"name" : "NoDiskConflict"}

{"name" : "MatchNodeSelector"}

{"name" : "HostName"}

{"name" : "Zone", "argument" : {"serviceAffinity" : {"labels" : ["zone"]}}}

{"name" : "RequireRegion", "argument" : {"labelsPresence" : {"labels" : ["region"], "presence" : true}}}

A custom set of priority functions can be specified to configure the scheduler. There are several priority functions provided out-of-the-box in Kubernetes. Some of these priority functions can be customized by providing certain parameters. Multiple priority functions can be combined and different weights can be given to each in order to impact the prioritization. A weight is required to be specified and cannot be 0 or negative.

{"name" : "LeastRequestedPriority", "weight" : 1}

{"name" : "BalancedResourceAllocation", "weight" : 1}

{"name" : "ServiceSpreadingPriority", "weight" : 1}

{"name" : "EqualPriority", "weight" : 1}

{"name" : "RackSpread", "weight" : 1, "argument" : {"serviceAntiAffinity" : {"label" : "rack"}}}

{"name" : "RackPreferred", "weight" : 1, "argument" : {"labelPreference" : {"label" : "rack"}}}

The selection of the predicate and priority functions defines the policy for the scheduler. Administrators can provide a JSON file that specifies the predicates and priority functions to configure the scheduler. The path to the scheduler policy file can be specified in the master configuration file. In the absence of the scheduler policy file, the default configuration gets applied.

It is important to note that the predicates and priority functions defined in the scheduler configuration file will completely override the default scheduler policy. If any of the default predicates and priority functions are required, they have to be explicitly specified in the scheduler configuration file.

One of the important use cases for scheduling within OpenShift Enterprise is to support flexible affinity and anti-affinity policies.

The configuration below specifies the default scheduler configuration, if it were to be specified via the scheduler policy file.

kind: "Policy"
version: "v1"
predicates:
  - name: "PodFitsPorts"
  - name: "PodFitsResources"
  - name: "NoDiskConflict"
  - name: "MatchNodeSelector"
  - name: "HostName"
priorities:
  - name: "LeastRequestedPriority"
    weight: 1
  - name: "BalancedResourceAllocation"
    weight: 1
  - name: "ServiceSpreadingPriority"
    weight: 1

Three topological levels defined as region (affinity) -→ zone (affinity) -→ rack (anti-affinity)

kind: "Policy"
version: "v1"
predicates:
...
  - name: "RegionZoneAffinity"
    argument:
      serviceAffinity:
        labels:
          - "region"
          - "zone"
priorities:
...
  - name: "RackSpread"
    weight: 1
    argument:
      serviceAntiAffinity:
        label: "rack"

Three topological levels defined as city (affinity) → building (anti-affinity) → room (anti-affinity):

kind: "Policy"
version: "v1"
predicates:
...
  - name: "CityAffinity"
    argument:
      serviceAffinity:
        labels:
          - "city"
priorities:
...
  - name: "BuildingSpread"
    weight: 1
    argument:
      serviceAntiAffinity:
        label: "building"
  - name: "RoomSpread"
    weight: 1
    argument:
      serviceAntiAffinity:
        label: "room"

Only use nodes with the 'region' label defined and prefer nodes with the 'zone' label defined:

kind: "Policy"
version: "v1"
predicates:
...
  - name: "RequireRegion"
    argument:
      labelsPresence:
        labels:
          - "region"
        presence: true
priorities:
...
  - name: "ZonePreferred"
    weight: 1
    argument:
      labelPreference:
        label: "zone"
        presence: true

Configuration example combining static and configurable predicates and priority functions:

kind: "Policy"
version: "v1"
predicates:
...
  - name: "RegionAffinity"
    argument:
      serviceAffinity:
        labels:
          - "region"
  - name: "RequireRegion"
    argument:
      labelsPresence:
        labels:
          - "region"
        presence: true
  - name: "BuildingNodesAvoid"
    argument:
      labelsPresence:
        labels:
          - "building"
        presence: false
  - name: "PodFitsPorts"
  - name: "MatchNodeSelector"
priorities:
...
  - name: "ZoneSpread"
    weight: 2
    argument:
      serviceAntiAffinity:
        label: "zone"
  - name: "ZonePreferred"
    weight: 1
    argument:
      labelPreference:
        label: "zone"
        presence: true
  - name: "ServiceSpreadingPriority"
    weight: 1

As is the case with almost everything else in Kubernetes/OpenShift, the scheduler is built using a plug-in model and the current implementation itself is a plug-in. There are two ways to extend the scheduler functionality:

Containers can specify compute resource requests and limits. Requests are used for scheduling your container and provide a minimum service guarantee. Limits constrain the amount of compute resource that may be consumed on your node.

The scheduler attempts to improve the utilization of compute resources across all nodes in the cluster. It places pods on nodes relative to the pods' compute resource requests to find a node that provides the best fit.

Requests and limits enable administrators to allow and manage the overcommitment of resources on a node, which may be desirable in development environments where performance is not a concern.

For each compute resource, a container may specify a resource request and limit. Scheduling decisions are made based on the request to ensure that a node has enough capacity available to meet the requested value. If a container specifies limits, but omits requests, the requests are defaulted to the limits. A container is not able to exceed the specified limit on the node.

The enforcement of limits is dependent upon the compute resource type. If a container makes no request or limit, the container is scheduled to a node with no resource guarantees. In practice, the container is able to consume as much of the specified resource as is available with the lowest local priority. In low resource situations, containers that specify no resource requests are given the lowest quality of service.

The node-enforced behavior for compute resources is specific to the resource type.

A node is overcommitted when it has a pod scheduled that makes no request, or when the sum of limits across all pods on that node exceeds available machine capacity.

In an overcommitted environment, it is possible that the pods on the node will attempt to use more compute resource than is available at any given point in time. When this occurs, the node must give priority to one pod over another. The facility used to make this decision is referred to as a Quality of Service (QoS) Class.

For each compute resource, a container is divided into one of three QoS classes with decreasing order of priority:

Memory is an incompressible resource, so in low memory situations, containers are killed that have the lowest priority:

In an overcommitted environment, it is important to properly configure your node to provide best system behavior.

kubeletArguments:
  cpu-cfs-quota:
    - "false"

apiVersion: v1
kind: Pod
metadata:
  name: resource-reserver
spec:
  containers:
  - name: sleep-forever
    image: gcr.io/google_containers/pause:0.8.0
    resources:
      limits:
        cpu: 100m 1
        memory: 150Mi 2

kubeletArguments:
  config:
    - "/etc/origin/node"  1

$ sysctl -w vm.overcommit_memory=1

$ sysctl -w vm.panic_on_oom=0

$ swapoff -a

Over time, API objects created in OpenShift can accumulate in the etcd data store through normal user operations, such as when building and deploying applications.

As an administrator, you can periodically prune older versions of objects from your OpenShift instance that are no longer needed. For example, by pruning images you can delete older images and layers that are no longer in use, but are still taking up disk space.

The CLI groups prune operations under a common parent command.

$ oadm prune <object_type> <options>

This specifies:

In order to prune deployments that are no longer required by the system due to age and status, administrators may run the following command:

$ oadm prune deployments [<options>]

To see what a pruning operation would delete:

$ oadm prune deployments --orphans --keep-complete=5 --keep-failed=1 \
    --keep-younger-than=60m

To actually perform the prune operation:

$ oadm prune deployments --orphans --keep-complete=5 --keep-failed=1 \
    --keep-younger-than=60m --confirm

In order to prune builds that are no longer required by the system due to age and status, administrators may run the following command:

$ oadm prune builds [<options>]

To see what a pruning operation would delete:

$ oadm prune builds --orphans --keep-complete=5 --keep-failed=1 \
    --keep-younger-than=60m

To actually perform the prune operation:

$ oadm prune builds --orphans --keep-complete=5 --keep-failed=1 \
    --keep-younger-than=60m --confirm

In order to prune images that are no longer required by the system due to age and status, administrators may run the following command:

$ oadm prune images [<options>]

OpenShift uses the following logic to determine which images and layers to prune:

To see what a pruning operation would delete:

$ oadm prune images --keep-tag-revisions=3 --keep-younger-than=60m

To actually perform the prune operation:

$ oadm prune images --keep-tag-revisions=3 --keep-younger-than=60m --confirm

The OpenShift node performs two types of garbage collection:

The policy for container garbage collection is based on three node settings:

The maximum-dead-containers setting takes precedence over the maximum-dead-containers-per-container setting when there is a conflict. For example, if retaining the number of maximum-dead-containers-per-container would result in a total number of containers that is greater than maximum-dead-containers, the oldest containers will be removed to satisfy the maximum-dead-containers limit.

When the node removes the dead containers, all files inside those containers are removed as well. Only containers created by the node will be garbage collected.

You can specify values for these settings in the kubeletArguments section of the node configuration file (the /etc/origin/node/node-config.yaml file by default). Add the section if it does not already exist:

kubeletArguments:
  minimum-container-ttl-duration:
    - "10s"
  maximum-dead-containers-per-container:
    - "2"
  maximum-dead-containers:
    - "100"

Image garbage collection relies on disk usage as reported by cAdvisor on the node to decide which images to remove from the node. It takes the following settings into consideration:

You can specify values for these settings in the kubeletArguments section of the node configuration file (the /etc/origin/node/node-config.yaml file by default). Add the section if it does not already exist:

kubeletArguments:
  image-gc-high-threshold:
    - "90"
  image-gc-low-threshold:
    - "80"

Depending on the underlying implementation, you can monitor a running router in multiple ways. This topic discusses the HAProxy template router and the components to check to ensure its health.

The HAProxy router exposes a web listener for the HAProxy statistics. Enter the router’s public IP address and the correctly configured port (1936 by default) to view the statistics page, and enter the administrator password when prompted. This password and port are configured during the router installation, but they can be found by viewing the haproxy.config file on the container.

By default the HAProxy statistics are exposed on port 1936 (with a password protected account). To disable exposing the HAProxy statistics, specify 0 as the stats port number.

$ oadm router hap --service-account=router --stats-port=0  \
    --credentials='/etc/origin/master/openshift-router.kubeconfig'

Note: HAProxy will still collect and store statistics, it would just not expose them via a web listener. You can still get access to the statistics by sending a request to the HAProxy AF_UNIX socket inside the HAProxy Router container.

$ cmd="echo 'show stat' | socat - UNIX-CONNECT:/var/lib/haproxy/run/haproxy.sock"
$ routerPod=$(oc get pods --selector="router=router"  \
    --template="{{with index .items 0}}{{.metadata.name}}{{end}}")
$ oc exec $routerPod -- bash -c "$cmd"

To view a router log, run the oc logs command on the pod. Since the router is running as a plug-in process that manages the underlying implementation, the log is for the plug-in, not the actual HAProxy log.

routes.json

Routes are processed by the HAProxy router, and are stored both in memory, on disk, and in the HAProxy configuration file. The internal route representation, which is passed to the template to generate the HAProxy configuration file, is found in the /var/lib/containers/router/routes.json file. When troubleshooting a routing issue, view this file to see the data being used to drive configuration.

HAProxy configuration

You can find the HAProxy configuration and the backends that have been created for specific routes in the /var/lib/haproxy/conf/haproxy.config file. The mapping files are found in the same directory. The helper frontend and backends use mapping files when mapping incoming requests to a backend.

Certificates

Certificates are stored in two places:

The files are keyed by the namespace and name of the route. The key, certificate, and CA certificate are concatenated into a single file. You can use OpenSSL to view the contents of these files.

This topic describes how to set up highly-available services on your OpenShift cluster.

The Kubernetes replication controller ensures that the deployment requirements, in particular the number of replicas, are satisfied when the appropriate resources are available. When run with two or more replicas, the router can be resilient to failures, providing a highly-available service. Depending on how the router instances are discovered (via a service, DNS entry, or IP addresses), this could impose operational requirements to handle failure cases when one or more router instances are "unreachable".

For some IP-based traffic services, virtual IP addresses (VIPs) should always be serviced for as long as a single instance is available. This simplifies the operational overhead and handles failure cases gracefully.

Use cases for high-availability include:

You can configure a highly-available router or network setup by running multiple instances of the pod and fronting them with a balancing tier. This can be something as simple as DNS round robin, or as complex as multiple load-balancing layers.

Using IP failover involves switching IP addresses to a redundant or stand-by set of nodes on failure conditions.

The oadm ipfailover command helps set up the VIP failover configuration. As an administrator, you can configure IP failover on an entire cluster, or on a subset of nodes, as defined by the labeled selector. If you are running in production, match the labeled selector with at least two nodes to ensure you have failover protection and provide a --replicas=<n> value that matches the number of nodes for the given labeled selector:

$ oadm ipfailover [<Ip_failover_config_name>] <options> --replicas=<n>

The oadm ipfailover command ensures that a failover pod runs on each of the nodes matching the constraints or label used. This pod uses VRRP (Virtual Router Redundancy Protocol) with Keepalived to ensure that the service on the watched port is available, and, if needed, Keepalived will automatically float the VIPs if the service is not available.

When your cluster is configured to use the ovs-multitenant SDN plug-in, you can manage the separate pod overlay networks for projects using the administrator CLI.

To join projects to an existing project network:

$ oadm pod-network join-projects --to=<project1> <project2> <project3>

In the above example, all the pods and services in <project2> and <project3> can now access any pods and services in <project1> and vice versa.

Alternatively, instead of specifying specific project names, you can use the --selector=<project_selector> option.

To allow projects to access all pods and services in the cluster and vice versa:

$ oadm pod-network make-projects-global <project1> <project2>

In the above example, all the pods and services in <project1> and <project2> can now access any pods and services in the cluster and vice versa.

Alternatively, instead of specifying specific project names, you can use the --selector=<project_selector> option.

In OpenShift, projects are used to isolate content from groups of developers. As an OpenShift administrator, you can give developers access to certain projects, allow them to create their own, and give them administrator rights.

You can allow developers to create their own projects. There is an endpoint that will provision a project according to a template. The web console and oc new-project command use this endpoint when a developer creates a new project.

Node selectors are used in conjunction with labeled nodes to control pod placement.

...
projectConfig:
  defaultNodeSelector: "type=user-node,region=east"
...

# systemctl restart atomic-openshift-master

$ oadm new-project myproject \
    --node-selector='type=user-node,region=east'

...
metadata:
  annotations:
    openshift.io/node-selector: type=user-node,region=east
...

This topic describes how administrators should work with iptables. openshift-sdn takes care of adding the necessary iptables rules to make it work. Kubernetes and Docker also manage iptables for port forwarding and services.

Docker doesn’t monitor the iptables rules that it adds for exposing ports from containers and hence if iptables service is restarted, then these rules are lost. So, to safely restart iptables, it is recommended that the rules are saved and restored.

$ iptables-save > /path/to/iptables.bkp
$ systemctl restart iptables
$ iptables-restore < /path/to/iptables.bkp

Builds in OpenShift are run in privileged containers that have access to the Docker daemon socket. As a security measure, it is recommended to limit who can run builds and the strategy that is used for those builds. Custom builds are inherently less safe than Source builds, given that they can execute any code in the build with potentially full access to the node’s Docker socket. Docker build permission should also be granted with caution as a vulnerability in the Docker build logic could result in a privileges being granted on the host node.

By default, project administrators (the admin role) and project editors (the edit role) are granted permission to use all build strategies (Docker, Source-to-Image, and Custom).

You can control who can build with what build strategy using an authorization policy. Each build strategy has a corresponding build subresource. Granting permission to create on the build subresource allows the user to create builds of that type.

To prevent access to a particular build strategy globally, log in as a user with cluster-admin privileges and edit each of the default roles:

$ oc edit clusterrole admin
$ oc edit clusterrole edit

For each role, remove the line that corresponds to the resource of the strategy to disable:

kind: ClusterRole
metadata:
  name: admin
...

rules:
- attributeRestrictions: null
  resources:
  - builds/custom
  - builds/docker 1
  - builds/source
  - pods/exec
  - pods/portforward

...

To allow only a set of specific users to create builds with a particular strategy:

Similar to granting the build strategy role to a user globally, to allow only a set of specific users within a project to create builds with a particular strategy:

OpenShift uses image change triggers in a build configuration to detect when an image stream tag has been updated. You can use the oadm build-chain command to build a dependency tree that identifies which images would be affected by updating an image in a specified image stream.

The build-chain tool can determine which builds to trigger; it analyzes the output of those builds to determine if they will in turn update another image stream tag. If they do, the tool continues to follow the dependency tree. Lastly, it outputs a graph specifying the image stream tags that would be impacted by an update to the top-level tag. The default output syntax for this tool is set to a human-readable format; the DOT format is also supported.

The following table describes common build-chain usage and general syntax:

$ oadm build-chain <image-stream>

$ oadm build-chain <image-stream>:v2 \
    -o dot \
    | dot -T svg -o deps.svg

$ oadm build-chain <image-stream>:v1 \
    -n test --all

In OpenShift Enterprise, you can back up (saving state to separate storage) and restore (recreating state from separate storage) at the cluster level. There is also some preliminary support for per-project backup. The full state of a cluster installation includes:

This topic does not cover how to back up and restore persistent storage, as those topics are left to the underlying storage provider.

Note the location of the etcd data directory (or $ETCD_DATA_DIR in the following sections), which depends on how etcd is deployed.

A future release of OpenShift Enterprise will feature specific support for per-project back up and restore.

For now, to back up API objects at the project level, use oc export for each object to be saved. For example, to save the deployment configuration frontend in YAML format:

$ oc export dc frontend -o yaml > dc-frontend.yaml

To back up all of the project (with the exception of cluster objects like namespaces and projects):

$ oc export all -o yaml > project.yaml

As described in the SDN documentation there are multiple layers of interfaces that are created to correctly pass the traffic from one container to another. In order to debug connectivity issues, you have to test the different layers of the stack to work out where the problem arises. This guide will help you dig down through the layers to identify the problem and how to fix it.

Part of the problem is that OpenShift can be set up many ways, and the networking can be wrong in a few different places. So this document will work through some scenarios that, hopefully, will cover the majority of cases. If your problem is not covered, the tools and concepts that are introduced should help guide debugging efforts.

The following diagram shows all of the pieces involved with external access.

If you are on an machine outside the cluster and are trying to access a resource provided by the cluster there needs to be a process running in a pod that listens on a public IP address and "routes" that traffic inside the cluster. The OpenShift router serves that purpose for HTTP, HTTPS (with SNI), WebSockets, or TLS (with SNI).

Assuming you can’t access an HTTP service from the outside of the cluster, let’s start by reproducing the problem on the command line of the machine where things are failing. Try:

curl -kv http://foo.example.com:8000/bar    # But replace the argument with your URL

If that works, are you reproducing the bug from the right place? It is also possible that the service has some pods that work, and some that don’t. So jump ahead to the Section 19.4, “Debugging the Router” section.

If that failed, then let’s resolve the DNS name to an IP address (assuming it isn’t already one):

dig +short foo.example.com                  # But replace the hostname with yours

If that doesn’t give back an IP address, it’s time to troubleshoot DNS, but that’s outside the scope of this guide.

Next, use ping -c address and tracepath address to check that you can reach the router host. It is possible that they will not respond to ICMP packets, in which case those tests will fail, but the router machine may be reachable. In which case, try using the telnet command to access the port for the router directly:

telnet 1.2.3.4 8000

You may get:

Trying 1.2.3.4...
Connected to 1.2.3.4.
Escape character is '^]'.

If so, there’s something listening on the port on the IP address. That’s good. Hit ctrl-] then hit the enter key and then type close to quit telnet. Move on to the Section 19.4, “Debugging the Router” section to check other things on the router.

Or you could get:

Trying 1.2.3.4...
telnet: connect to address 1.2.3.4: Connection refused

Which tells us that the router is not listening on that port. Please see the Section 19.4, “Debugging the Router” section for more pointers on how to configure the router.

Or if you see:

Trying 1.2.3.4...
  telnet: connect to address 1.2.3.4: Connection timed out

Which tells us that you can’t talk to anything on that IP address. Check your routing, firewalls, and that you have a router listening on that IP address. To debug the router, see the Section 19.4, “Debugging the Router” section. For IP routing and firewall issues, debugging that is beyond the purview of this guide.

Now that you have an IP address, we need to ssh to that machine and check that the router software is running on that machine and configured correctly. So let’s ssh there and get administrative OpenShift credentials.

$ oc login -u system:admin -n default

Check that the router is running:

# oc get endpoints --namespace=default --selector=router
NAMESPACE   NAME              ENDPOINTS
default     router            10.1.0.4:80

If that command fails, then your OpenShift configuration is broken. Fixing that is outside the scope of this document.

You should see one or more router endpoints listed, but that won’t tell you if they are running on the machine with the given external IP address, since the endpoint IP address will be one of the pod addresses that is internal to the cluster. To get the list of router host IP addresses, run:

# oc get pods --all-namespaces --selector=router --template='{{range .items}}HostIP: {{.status.hostIP}}   PodIP: {{.status.podIP}}{{end}}{{"\n"}}'
HostIP: 192.168.122.202   PodIP: 10.1.0.4

You should see the host IP that corresponds to your external address. If you do not, please refer to the router documentation to configure the router pod to run on the right node (by setting the affinity correctly) or update your DNS to match the IP addresses where the routers are running.

At this point in the guide, you should be on a node, running your router pod, but you still can not get the http request to work. First we need to make sure that the router is mapping the external URL to the correct service, and if that works, we need to dig into that service to make sure that all endpoints are reachable.

Let’s list all of the routes that OpenShift knows about:

# oc get route --all-namespaces
NAME              HOST/PORT         PATH      SERVICE        LABELS    TLS TERMINATION
route-unsecured   www.example.com   /test     service-name

If the host name and path from your URL don’t match anything in the list of returned routes, then you need to add a route. See the router documentation.

If your route is present, then you need to debug access to the endpoints. That’s the same as if you were debugging problems with a service, so please continue on with the next Section 19.5, “Debugging a Service” section.

If you can’t communicate with a service from inside the cluster (either because your services can’t communicate directly, or because you are using the router and everything works until you get into the cluster) then you need to work out what endpoints are associated with a service and debug them.

First, let’s get the services:

# oc get services --all-namespaces
NAMESPACE   NAME              LABELS                                    SELECTOR                  IP(S)            PORT(S)
default     docker-registry   docker-registry=default                   docker-registry=default   172.30.243.225   5000/TCP
default     kubernetes        component=apiserver,provider=kubernetes   <none>                    172.30.0.1       443/TCP
default     router            router=router                             router=router             172.30.213.8     80/TCP

You should see your service in the list. If not, then you need to define your service.

The IP addresses listed in the service output are the Kubernetes service IP addresses that Kubernetes will map to one of the pods that backs that service. So you should be able to talk to that IP address. But, unfortunately, even if you can, it doesn’t mean all pods are reachable; and if you can’t, it doesn’t mean all pods aren’t reachable. It just tells you the status of the one that kubeproxy hooked you up to.

Let’s test the service anyway. From one of your nodes:

curl -kv http://172.30.243.225:5000/bar                  # Replace the argument with your service IP address and port

Then, let’s work out what pods are backing our service (replace docker-registry with the name of the broken service):

# oc get endpoints --selector=docker-registry
NAME              ENDPOINTS
docker-registry   10.1.2.2:5000

From this, we can see that there’s only one endpoint. So, if your service test succeeded, and the router test succeeded, then something really odd is going on. But if there’s more than one endpoint, or the service test failed, try the following for each endpoint. Once you identify what endpoints aren’t working, then proceed to the next section.

First, test each endpoint (change the URL to have the right endpoint IP, port, and path):

curl -kv http://10.1.2.2:5000/bar

If that works, great, try the next one. If it failed, make a note of it and we’ll work out why, in the next section.

If all of them failed, then it is possible that the local node is not working, jump to the Section 19.7, “Debugging Local Networking” section.

If all of them worked, then jump to the Section 19.11, “Debugging Kubernetes” section to work out why the service IP address isn’t working.

Using our list of non-working endpoints, we need to test connectivity to the node.

Other debugging options for node to node networking can be solved with the following:

Once you have ascertained that the node to node connectivity is fine, we need to look at the SDN configuration on both ends.

At this point we should have a list of one or more endpoints that you can’t communicate with, but that have node to node connectivity. For each one, we need to work out what is wrong, but first you need to understand how the SDN sets up the networking on a node for the different pods.

# ip route
default via 192.168.122.1 dev ens3
10.1.0.0/16 dev tun0  proto kernel  scope link                          # This sends all pod traffic into OVS
10.1.1.0/24 dev tun0  proto kernel  scope link  src 10.1.1.1            # This is traffic going to local pods, overriding the above
169.254.0.0/16 dev ens3  scope link  metric 1002                        # This is for Zeroconf (may not be present)
172.17.0.0/16 dev docker0  proto kernel  scope link  src 172.17.42.1    # Docker's private IPs... used only by things directly configured by docker; not OpenShift
192.168.122.0/24 dev ens3  proto kernel  scope link  src 192.168.122.46 # The physical interface on the local subnet

# ovs-vsctl list-br
br0

# ovs-ofctl -O OpenFlow13 dump-ports-desc br0
OFPST_PORT_DESC reply (OF1.3) (xid=0x2):
 1(vxlan0): addr:9e:f1:7d:4d:19:4f
     config:     0
     state:      0
     speed: 0 Mbps now, 0 Mbps max
 2(tun0): addr:6a:ef:90:24:a3:11
     config:     0
     state:      0
     speed: 0 Mbps now, 0 Mbps max
 8(vethe19c6ea): addr:1e:79:f3:a0:e8:8c
     config:     0
     state:      0
     current:    10GB-FD COPPER
     speed: 10000 Mbps now, 0 Mbps max
 9(vovsbr): addr:6e:dc:28:df:63:c3
     config:     0
     state:      0
     current:    10GB-FD COPPER
     speed: 10000 Mbps now, 0 Mbps max
 LOCAL(br0): addr:0a:7f:b4:33:c2:43
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max

# ovs-ofctl -O OpenFlow13 dump-flows br0
OFPST_FLOW reply (OF1.3) (xid=0x2):

# External access is the default if no higher priority matches
table=0, priority=50                           actions=output:2

# ARP and IP Traffic destined for the local subnet gateway goes out of the switch to
# IP tables and the main route table
table=0, priority=100,arp,arp_tpa=10.1.1.1     actions=output:2
table=0, priority=100, ip, nw_dst=10.1.1.1     actions=output:2

# All remote nodes should have two entries here, one for IP and one for ARP.
# Here we see the entries for two remote nodes
table=0, priority=100,arp,arp_tpa=10.1.2.0/24  actions=set_field:192.168.122.18->tun_dst,output:1
table=0, priority=100, ip, nw_dst=10.1.2.0/24  actions=set_field:192.168.122.18->tun_dst,output:1

table=0, priority=100,arp,arp_tpa=10.1.0.0/24  actions=set_field:192.168.122.202->tun_dst,output:1
table=0, priority=100, ip, nw_dst=10.1.0.0/24  actions=set_field:192.168.122.202->tun_dst,output:1

# Other traffic destined for a local pod IP that hasn't been handled by a higher priority rule
# goes out port 9 to the virtual bridge for docker
table=0, priority=75,  ip, nw_dst=10.1.1.0/24  actions=output:9
table=0, priority=75, arp,arp_tpa=10.1.1.0/24  actions=output:9

# Then ports 3-8 or 10+ are for local pods, here there are two local pods
table=0, priority=100, ip, nw_dst=10.1.0.7     actions=output:8
table=0, priority=100,arp,arp_tpa=10.1.0.7     actions=output:8

table=0, priority=100, ip, nw_dst=10.1.0.10    actions=output:12
table=0, priority=100,arp,arp_tpa=10.1.0.10    actions=output:12

If you are trying to access an external service from a pod, e.g.:

curl -kv github.com

Make sure that the DNS is resolving correctly:

dig +search +noall +answer github.com

That should return the IP address for the github server, but check that you got back the correct address. If you get back no address, or the address of one of your machines, then you may be matching the wildcard entry in your local DNS server.

To fix that, you either need to make sure that DNS server that has the wildcard entry is not listed as a nameserver in your /etc/resolv.conf or you need to make sure that the wildcard domain is not listed in the search list.

If the correct IP address was returned, then try the debugging advice listed above in Section 19.7, “Debugging Local Networking”. Your traffic should leave the Open vSwitch on port 2 to pass through the iptables rules, then out the route table normally.

Run: journalctl -u atomic-openshift-node.service --boot | less

Look for the Output of setup script: line. Everything starting with '+' below that are the script steps. Look through that for obvious errors.

Following the script you should see lines with Output of adding table=0. Those are the OVS rules, and there should be no errors.

Check iptables -t nat -L to make sure that the service is being NAT’d to the right port on the local machine for the kubeproxy.

OpenShift Enterprise 3.1.1 release.

OpenShift Enterprise 3.1 release.