Menu Close

Chapter 2. Installing on AWS

2.1. Configuring an AWS account

Before you can install OpenShift Container Platform, you must configure an Amazon Web Services (AWS) account.

2.1.1. Configuring Route 53

To install OpenShift Container Platform, the Amazon Web Services (AWS) account you use must have a dedicated public hosted zone in your Route 53 service. This zone must be authoritative for the domain. The Route 53 service provides cluster DNS resolution and name lookup for external connections to the cluster.

Procedure

  1. Identify your domain, or subdomain, and registrar. You can transfer an existing domain and registrar or obtain a new one through AWS or another source.

    Note

    If you purchase a new domain through AWS, it takes time for the relevant DNS changes to propagate. For more information about purchasing domains through AWS, see Registering Domain Names Using Amazon Route 53 in the AWS documentation.

  2. If you are using an existing domain and registrar, migrate its DNS to AWS. See Making Amazon Route 53 the DNS Service for an Existing Domain in the AWS documentation.
  3. Create a public hosted zone for your domain or subdomain. See Creating a Public Hosted Zone in the AWS documentation.

    Use an appropriate root domain, such as openshiftcorp.com, or subdomain, such as clusters.openshiftcorp.com.

  4. Extract the new authoritative name servers from the hosted zone records. See Getting the Name Servers for a Public Hosted Zone in the AWS documentation.
  5. Update the registrar records for the AWS Route 53 name servers that your domain uses. For example, if you registered your domain to a Route 53 service in a different accounts, see the following topic in the AWS documentation: Adding or Changing Name Servers or Glue Records.
  6. If you are using a subdomain, add its delegation records to the parent domain. This gives Amazon Route 53 responsibility for the subdomain. Follow the delegation procedure outlined by the DNS provider of the parent domain. See Creating a subdomain that uses Amazon Route 53 as the DNS service without migrating the parent domain in the AWS documentation for an example high level procedure.

2.1.2. AWS account limits

The OpenShift Container Platform cluster uses a number of Amazon Web Services (AWS) components, and the default Service Limits affect your ability to install OpenShift Container Platform clusters. If you use certain cluster configurations, deploy your cluster in certain AWS regions, or run multiple clusters from your account, you might need to request additional resources for your AWS account.

The following table summarizes the AWS components whose limits can impact your ability to install and run OpenShift Container Platform clusters.

ComponentNumber of clusters available by defaultDefault AWS limitDescription

Instance Limits

Varies

Varies

By default, each cluster creates the following instances:

  • One bootstrap machine, which is removed after installation
  • Three master nodes
  • Three worker nodes

These instance type counts are within a new account’s default limit. To deploy more worker nodes, enable autoscaling, deploy large workloads, or use a different instance type, review your account limits to ensure that your cluster can deploy the machines that you need.

In most regions, the bootstrap and worker machines uses an m4.large machines and the master machines use m4.xlarge instances. In some regions, including all regions that do not support these instance types, m5.large and m5.xlarge instances are used instead.

Elastic IPs (EIPs)

0 to 1

5 EIPs per account

To provision the cluster in a highly available configuration, the installation program creates a public and private subnet for each availability zone within a region. Each private subnet requires a NAT Gateway, and each NAT gateway requires a separate elastic IP. Review the AWS region map to determine how many availability zones are in each region. To take advantage of the default high availability, install the cluster in a region with at least three availability zones. To install a cluster in a region with more than five availability zones, you must increase the EIP limit.

Important

To use the us-east-1 region, you must increase the EIP limit for your account.

Virtual Private Clouds (VPCs)

5

5 VPCs per region

Each cluster creates its own VPC.

Elastic Load Balancing (ELB/NLB)

3

20 per region

By default, each cluster creates internal and external network load balancers for the master API server and a single classic elastic load balancer for the router. Deploying more Kubernetes Service objects with type LoadBalancer will create additional load balancers.

NAT Gateways

5

5 per availability zone

The cluster deploys one NAT gateway in each availability zone.

Elastic Network Interfaces (ENIs)

At least 12

350 per region

The default installation creates 21 ENIs and an ENI for each availability zone in your region. For example, the us-east-1 region contains six availability zones, so a cluster that is deployed in that zone uses 27 ENIs. Review the AWS region map to determine how many availability zones are in each region.

Additional ENIs are created for additional machines and elastic load balancers that are created by cluster usage and deployed workloads.

VPC Gateway

20

20 per account

Each cluster creates a single VPC Gateway for S3 access.

S3 buckets

99

100 buckets per account

Because the installation process creates a temporary bucket and the registry component in each cluster creates a bucket, you can create only 99 OpenShift Container Platform clusters per AWS account.

Security Groups

250

2,500 per account

Each cluster creates 10 distinct security groups.

2.1.3. Required AWS permissions

When you attach the AdministratorAccess policy to the IAM user that you create in Amazon Web Services (AWS), you grant that user all of the required permissions. To deploy all components of an OpenShift Container Platform cluster, the IAM user requires the following permissions:

Example 2.1. Required EC2 permissions for installation

  • tag:TagResources
  • tag:UntagResources
  • ec2:AllocateAddress
  • ec2:AssociateAddress
  • ec2:AuthorizeSecurityGroupEgress
  • ec2:AuthorizeSecurityGroupIngress
  • ec2:CopyImage
  • ec2:CreateNetworkInterface
  • ec2:AttachNetworkInterface
  • ec2:CreateSecurityGroup
  • ec2:CreateTags
  • ec2:CreateVolume
  • ec2:DeleteSecurityGroup
  • ec2:DeleteSnapshot
  • ec2:DeleteTags
  • ec2:DeregisterImage
  • ec2:DescribeAccountAttributes
  • ec2:DescribeAddresses
  • ec2:DescribeAvailabilityZones
  • ec2:DescribeDhcpOptions
  • ec2:DescribeImages
  • ec2:DescribeInstanceAttribute
  • ec2:DescribeInstanceCreditSpecifications
  • ec2:DescribeInstances
  • ec2:DescribeInternetGateways
  • ec2:DescribeKeyPairs
  • ec2:DescribeNatGateways
  • ec2:DescribeNetworkAcls
  • ec2:DescribeNetworkInterfaces
  • ec2:DescribePrefixLists
  • ec2:DescribeRegions
  • ec2:DescribeRouteTables
  • ec2:DescribeSecurityGroups
  • ec2:DescribeSubnets
  • ec2:DescribeTags
  • ec2:DescribeVolumes
  • ec2:DescribeVpcAttribute
  • ec2:DescribeVpcClassicLink
  • ec2:DescribeVpcClassicLinkDnsSupport
  • ec2:DescribeVpcEndpoints
  • ec2:DescribeVpcs
  • ec2:GetEbsDefaultKmsKeyId
  • ec2:ModifyInstanceAttribute
  • ec2:ModifyNetworkInterfaceAttribute
  • ec2:ReleaseAddress
  • ec2:RevokeSecurityGroupEgress
  • ec2:RevokeSecurityGroupIngress
  • ec2:RunInstances
  • ec2:TerminateInstances

Example 2.2. Required permissions for creating network resources during installation

  • ec2:AssociateDhcpOptions
  • ec2:AssociateRouteTable
  • ec2:AttachInternetGateway
  • ec2:CreateDhcpOptions
  • ec2:CreateInternetGateway
  • ec2:CreateNatGateway
  • ec2:CreateRoute
  • ec2:CreateRouteTable
  • ec2:CreateSubnet
  • ec2:CreateVpc
  • ec2:CreateVpcEndpoint
  • ec2:ModifySubnetAttribute
  • ec2:ModifyVpcAttribute
Note

If you use an existing VPC, your account does not require these permissions for creating network resources.

Example 2.3. Required Elastic Load Balancing permissions for installation

  • elasticloadbalancing:AddTags
  • elasticloadbalancing:ApplySecurityGroupsToLoadBalancer
  • elasticloadbalancing:AttachLoadBalancerToSubnets
  • elasticloadbalancing:ConfigureHealthCheck
  • elasticloadbalancing:CreateListener
  • elasticloadbalancing:CreateLoadBalancer
  • elasticloadbalancing:CreateLoadBalancerListeners
  • elasticloadbalancing:CreateTargetGroup
  • elasticloadbalancing:DeleteLoadBalancer
  • elasticloadbalancing:DeregisterInstancesFromLoadBalancer
  • elasticloadbalancing:DeregisterTargets
  • elasticloadbalancing:DescribeInstanceHealth
  • elasticloadbalancing:DescribeListeners
  • elasticloadbalancing:DescribeLoadBalancerAttributes
  • elasticloadbalancing:DescribeLoadBalancers
  • elasticloadbalancing:DescribeTags
  • elasticloadbalancing:DescribeTargetGroupAttributes
  • elasticloadbalancing:DescribeTargetHealth
  • elasticloadbalancing:ModifyLoadBalancerAttributes
  • elasticloadbalancing:ModifyTargetGroup
  • elasticloadbalancing:ModifyTargetGroupAttributes
  • elasticloadbalancing:RegisterInstancesWithLoadBalancer
  • elasticloadbalancing:RegisterTargets
  • elasticloadbalancing:SetLoadBalancerPoliciesOfListener

Example 2.4. Required IAM permissions for installation

  • iam:AddRoleToInstanceProfile
  • iam:CreateInstanceProfile
  • iam:CreateRole
  • iam:DeleteInstanceProfile
  • iam:DeleteRole
  • iam:DeleteRolePolicy
  • iam:GetInstanceProfile
  • iam:GetRole
  • iam:GetRolePolicy
  • iam:GetUser
  • iam:ListInstanceProfilesForRole
  • iam:ListRoles
  • iam:ListUsers
  • iam:PassRole
  • iam:PutRolePolicy
  • iam:RemoveRoleFromInstanceProfile
  • iam:SimulatePrincipalPolicy
  • iam:TagRole
Note

If you have not created an elastic load balancer (ELB) in your AWS account, the IAM user also requires the iam:CreateServiceLinkedRole permission.

Example 2.5. Required Route 53 permissions for installation

  • route53:ChangeResourceRecordSets
  • route53:ChangeTagsForResource
  • route53:CreateHostedZone
  • route53:DeleteHostedZone
  • route53:GetChange
  • route53:GetHostedZone
  • route53:ListHostedZones
  • route53:ListHostedZonesByName
  • route53:ListResourceRecordSets
  • route53:ListTagsForResource
  • route53:UpdateHostedZoneComment

Example 2.6. Required S3 permissions for installation

  • s3:CreateBucket
  • s3:DeleteBucket
  • s3:GetAccelerateConfiguration
  • s3:GetBucketAcl
  • s3:GetBucketCors
  • s3:GetBucketLocation
  • s3:GetBucketLogging
  • s3:GetBucketObjectLockConfiguration
  • s3:GetBucketReplication
  • s3:GetBucketRequestPayment
  • s3:GetBucketTagging
  • s3:GetBucketVersioning
  • s3:GetBucketWebsite
  • s3:GetEncryptionConfiguration
  • s3:GetLifecycleConfiguration
  • s3:GetReplicationConfiguration
  • s3:ListBucket
  • s3:PutBucketAcl
  • s3:PutBucketTagging
  • s3:PutEncryptionConfiguration

Example 2.7. S3 permissions that cluster Operators require

  • s3:DeleteObject
  • s3:GetObject
  • s3:GetObjectAcl
  • s3:GetObjectTagging
  • s3:GetObjectVersion
  • s3:PutObject
  • s3:PutObjectAcl
  • s3:PutObjectTagging

Example 2.8. Required permissions to delete base cluster resources

  • autoscaling:DescribeAutoScalingGroups
  • ec2:DeleteNetworkInterface
  • ec2:DeleteVolume
  • elasticloadbalancing:DeleteTargetGroup
  • elasticloadbalancing:DescribeTargetGroups
  • iam:DeleteAccessKey
  • iam:DeleteUser
  • iam:ListInstanceProfiles
  • iam:ListRolePolicies
  • iam:ListUserPolicies
  • s3:DeleteObject
  • s3:ListBucketVersions
  • tag:GetResources

Example 2.9. Required permissions to delete network resources

  • ec2:DeleteDhcpOptions
  • ec2:DeleteInternetGateway
  • ec2:DeleteNatGateway
  • ec2:DeleteRoute
  • ec2:DeleteRouteTable
  • ec2:DeleteSubnet
  • ec2:DeleteVpc
  • ec2:DeleteVpcEndpoints
  • ec2:DetachInternetGateway
  • ec2:DisassociateRouteTable
  • ec2:ReplaceRouteTableAssociation
Note

If you use an existing VPC, your account does not require these permissions to delete network resources.

Example 2.10. Additional IAM and S3 permissions that are required to create manifests

  • iam:CreateAccessKey
  • iam:CreateUser
  • iam:DeleteAccessKey
  • iam:DeleteUser
  • iam:DeleteUserPolicy
  • iam:GetUserPolicy
  • iam:ListAccessKeys
  • iam:PutUserPolicy
  • iam:TagUser
  • iam:GetUserPolicy
  • iam:ListAccessKeys
  • s3:PutBucketPublicAccessBlock
  • s3:GetBucketPublicAccessBlock
  • s3:PutLifecycleConfiguration
  • s3:HeadBucket
  • s3:ListBucketMultipartUploads
  • s3:AbortMultipartUpload

2.1.4. Creating an IAM user

Each Amazon Web Services (AWS) account contains a root user account that is based on the email address you used to create the account. This is a highly-privileged account, and it is recommended to use it for only initial account and billing configuration, creating an initial set of users, and securing the account.

Before you install OpenShift Container Platform, create a secondary IAM administrative user. As you complete the Creating an IAM User in Your AWS Account procedure in the AWS documentation, set the following options:

Procedure

  1. Specify the IAM user name and select Programmatic access.
  2. Attach the AdministratorAccess policy to ensure that the account has sufficient permission to create the cluster. This policy provides the cluster with the ability to grant credentials to each OpenShift Container Platform component. The cluster grants the components only the credentials that they require.

    Note

    While it is possible to create a policy that grants the all of the required AWS permissions and attach it to the user, this is not the preferred option. The cluster will not have the ability to grant additional credentials to individual components, so the same credentials are used by all components.

  3. Optional: Add metadata to the user by attaching tags.
  4. Confirm that the user name that you specified is granted the AdministratorAccess policy.
  5. Record the access key ID and secret access key values. You must use these values when you configure your local machine to run the installation program.

    Important

    You cannot use a temporary session token that you generated while using a multi-factor authentication device to authenticate to AWS when you deploy a cluster. The cluster continues to use your current AWS credentials to create AWS resources for the entire life of the cluster, so you must use key-based, long-lived credentials.

2.1.5. Supported AWS regions

You can deploy an OpenShift Container Platform cluster to the following regions:

  • ap-northeast-1 (Tokyo)
  • ap-northeast-2 (Seoul)
  • ap-south-1 (Mumbai)
  • ap-southeast-1 (Singapore)
  • ap-southeast-2 (Sydney)
  • ca-central-1 (Central)
  • eu-central-1 (Frankfurt)
  • eu-north-1 (Stockholm)
  • eu-west-1 (Ireland)
  • eu-west-2 (London)
  • eu-west-3 (Paris)
  • me-south-1 (Bahrain)
  • sa-east-1 (São Paulo)
  • us-east-1 (N. Virginia)
  • us-east-2 (Ohio)
  • us-west-1 (N. California)
  • us-west-2 (Oregon)

2.1.6. Next steps

2.2. Manually creating IAM for AWS

2.2.1. Manually create IAM

The Cloud Credential Operator can be put into manual mode prior to installation in environments where the cloud identity and access management (IAM) APIs are not reachable, or the administrator prefers not to store an administrator-level credential secret in the cluster kube-system namespace.

Procedure

  1. Run the OpenShift Container Platform installer to generate manifests:

    $ openshift-install create manifests --dir=mycluster
  2. Insert a config map into the manifests directory so that the Cloud Credential Operator is placed in manual mode:

    $ cat <<EOF > mycluster/manifests/cco-configmap.yaml
    apiVersion: v1
    kind: ConfigMap
    metadata:
      name: cloud-credential-operator-config
      namespace: openshift-cloud-credential-operator
      annotations:
        release.openshift.io/create-only: "true"
    data:
      disabled: "true"
    EOF
  3. Remove the admin credential secret created using your local cloud credentials. This removal prevents your admin credential from being stored in the cluster:

    $ rm mycluster/openshift/99_cloud-creds-secret.yaml
  4. Obtain the OpenShift Container Platform release image your openshift-install binary is built to use:

    $ bin/openshift-install version

    Example output

    release image quay.io/openshift-release-dev/ocp-release:4.z.z-x86_64

  5. Locate all CredentialsRequest objects in this release image that target the cloud you are deploying on:

    $ oc adm release extract quay.io/openshift-release-dev/ocp-release:4.z.z-x86_64 --to ./release-image
  6. Locate the CredentialsRequests in the extracted file:

    $ grep -l "apiVersion: cloudcredential.openshift.io" * | xargs cat
    Note

    In a future OpenShift Container Platform release, there will be a new oc adm release command to scan for the CredentialsRequests and display them.

    This displays the details for each request. Remember to ignore any CredentialsRequests where the spec.providerSpec.kind does not match the cloud provider you are installing to.

    Sample CredentialsRequest object

    apiVersion: cloudcredential.openshift.io/v1
    kind: CredentialsRequest
    metadata:
      name: cloud-credential-operator-iam-ro
      namespace: openshift-cloud-credential-operator
    spec:
      secretRef:
        name: cloud-credential-operator-iam-ro-creds
        namespace: openshift-cloud-credential-operator
      providerSpec:
        apiVersion: cloudcredential.openshift.io/v1
        kind: AWSProviderSpec
        statementEntries:
        - effect: Allow
          action:
          - iam:GetUser
          - iam:GetUserPolicy
          - iam:ListAccessKeys
          resource: "*"

  7. Create YAML files for secrets in the openshift-install manifests directory that you generated previously. The secrets must be stored using the namespace and secret name defined in each request.spec.secretRef. The format for the secret data varies for each cloud provider.
  8. Proceed with cluster creation:

    $ openshift-install create cluster --dir=mycluster
    Important

    Before performing an upgrade, you might need to adjust your credentials if permissions have changed in the next release. In the future, the Cloud Credential Operator might prevent you from upgrading until you have indicated that you have addressed updated permissions.

2.2.2. Admin credentials root secret format

Each cloud provider uses a credentials root secret in the kube-system namespace by convention, which is then used to satisfy all credentials requests and create their respective secrets. This is done either by minting new credentials, Mint Mode, or by copying the credentials root secret, Passthrough Mode.

The format for the secret varies by cloud, and is also used for each CredentialsRequest secret.

Amazon Web Services (AWS) secret format

apiVersion: v1
kind: Secret
metadata:
  namespace: kube-system
  name: aws-creds
stringData:
  aws_access_key_id: <AccessKeyID>
  aws_secret_access_key: <SecretAccessKey>

2.2.2.1. Upgrades

In a future release, improvements to the Cloud Credential Operator will prevent situations where a user might enter an upgrade that will fail because their manually maintained credentials have not been updated to match the CredentialsRequest objects in the upcoming release image.

2.2.3. Mint Mode

Mint Mode is supported for AWS, GCP, and Azure.

The default and recommended best practice for running OpenShift Container Platform is to run the installer with an administrator-level cloud credential. The admin credential is stored in the kube-system namespace, and then used by the Cloud Credential Operator to process the CredentialsRequest objects in the cluster and create new users for each with specific permissions.

The benefits of Mint Mode include:

  • Each cluster component only has the permissions it requires.
  • Automatic, on-going reconciliation for cloud credentials including upgrades, which might require additional credentials or permissions.

One drawback is that Mint Mode requires admin credential storage in a cluster kube-system secret.

2.2.4. Mint Mode with removal or rotation of the admin credential

Currently, this mode is only supported on AWS.

In this mode, a user installs OpenShift Container Platform with an admin credential just like the normal mint mode. However, this mode removes the admin credential secret from the cluster post-installation.

The administrator can have the Cloud Credential Operator make its own request for a read-only credential that allows it to verify if all CredentialsRequest objects have their required permissions, thus the admin credential is not required unless something needs to be changed. After the associated credential is removed, it can be destroyed on the underlying cloud, if desired.

Prior to upgrade, the admin credential should be restored. In the future, upgrade might be blocked if the credential is not present.

The admin credential is not stored in the cluster permanently.

This mode still requires the admin credential in the cluster for brief periods of time. It also requires manually re-instating the secret with admin credentials for each upgrade.

2.3. Installing a cluster quickly on AWS

In OpenShift Container Platform version 4.5, you can install a cluster on Amazon Web Services (AWS) that uses the default configuration options.

2.3.1. Prerequisites

  • Review details about the OpenShift Container Platform installation and update processes.
  • Configure an AWS account to host the cluster.

    Important

    If you have an AWS profile stored on your computer, it must not use a temporary session token that you generated while using a multi-factor authentication device. The cluster continues to use your current AWS credentials to create AWS resources for the entire life of the cluster, so you must use key-based, long-lived credentials. To generate appropriate keys, see Managing Access Keys for IAM Users in the AWS documentation. You can supply the keys when you run the installation program.

  • If you use a firewall, you must configure it to allow the sites that your cluster requires access to.
  • If you do not allow the system to manage identity and access management (IAM), then a cluster administrator can manually create and maintain IAM credentials. Manual mode can also be used in environments where the cloud IAM APIs are not reachable.

2.3.2. Internet and Telemetry access for OpenShift Container Platform

In OpenShift Container Platform 4.5, you require access to the Internet to install your cluster. The Telemetry service, which runs by default to provide metrics about cluster health and the success of updates, also requires Internet access. If your cluster is connected to the Internet, Telemetry runs automatically, and your cluster is registered to the Red Hat OpenShift Cluster Manager (OCM).

Once you confirm that your Red Hat OpenShift Cluster Manager inventory is correct, either maintained automatically by Telemetry or manually using OCM, use subscription watch to track your OpenShift Container Platform subscriptions at the account or multi-cluster level.

You must have Internet access to:

  • Access the Red Hat OpenShift Cluster Manager page to download the installation program and perform subscription management. If the cluster has Internet access and you do not disable Telemetry, that service automatically entitles your cluster.
  • Access Quay.io to obtain the packages that are required to install your cluster.
  • Obtain the packages that are required to perform cluster updates.
Important

If your cluster cannot have direct Internet access, you can perform a restricted network installation on some types of infrastructure that you provision. During that process, you download the content that is required and use it to populate a mirror registry with the packages that you need to install a cluster and generate the installation program. With some installation types, the environment that you install your cluster in will not require Internet access. Before you update the cluster, you update the content of the mirror registry.

2.3.3. Generating an SSH private key and adding it to the agent

If you want to perform installation debugging or disaster recovery on your cluster, you must provide an SSH key to both your ssh-agent and the installation program. You can use this key to access the bootstrap machine in a public cluster to troubleshoot installation issues.

Note

In a production environment, you require disaster recovery and debugging.

You can use this key to SSH into the master nodes as the user core. When you deploy the cluster, the key is added to the core user’s ~/.ssh/authorized_keys list.

Note

You must use a local key, not one that you configured with platform-specific approaches such as AWS key pairs.

Procedure

  1. If you do not have an SSH key that is configured for password-less authentication on your computer, create one. For example, on a computer that uses a Linux operating system, run the following command:

    $ ssh-keygen -t ed25519 -N '' \
        -f <path>/<file_name> 1
    1
    Specify the path and file name, such as ~/.ssh/id_rsa, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.

    Running this command generates an SSH key that does not require a password in the location that you specified.

    Note

    If you plan to install an OpenShift Container Platform cluster that uses FIPS Validated / Modules in Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.

  2. Start the ssh-agent process as a background task:

    $ eval "$(ssh-agent -s)"

    Example output

    Agent pid 31874

If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.

  1. Add your SSH private key to the ssh-agent:

    $ ssh-add <path>/<file_name> 1

    Example output

    Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

    1
    Specify the path and file name for your SSH private key, such as ~/.ssh/id_rsa

Next steps

  • When you install OpenShift Container Platform, provide the SSH public key to the installation program.

2.3.4. Obtaining the installation program

Before you install OpenShift Container Platform, download the installation file on a local computer.

Prerequisites

  • You must install the cluster from a computer that uses Linux or macOS.
  • You need 500 MB of local disk space to download the installation program.

Procedure

  1. Access the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.
  2. Navigate to the page for your installation type, download the installation program for your operating system, and place the file in the directory where you will store the installation configuration files.

    Important

    The installation program creates several files on the computer that you use to install your cluster. You must keep both the installation program and the files that the installation program creates after you finish installing the cluster.

    Important

    Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. You must complete the OpenShift Container Platform uninstallation procedures outlined for your specific cloud provider to remove your cluster entirely.

  3. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

    $ tar xvf <installation_program>.tar.gz
  4. From the Pull Secret page on the Red Hat OpenShift Cluster Manager site, download your installation pull secret as a .txt file. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

2.3.5. Deploying the cluster

You can install OpenShift Container Platform on a compatible cloud platform.

Important

You can run the create cluster command of the installation program only once, during initial installation.

Prerequisites

  • Configure an account with the cloud platform that hosts your cluster.
  • Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.

Procedure

  1. Run the installation program:

    $ ./openshift-install create cluster --dir=<installation_directory> \ 1
        --log-level=info 2
    1
    For <installation_directory>, specify the directory name to store the files that the installation program creates.
    2
    To view different installation details, specify warn, debug, or error instead of info.
    Important

    Specify an empty directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.

    Provide values at the prompts:

    1. Optional: Select an SSH key to use to access your cluster machines.

      Note

      For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

    2. Select aws as the platform to target.
    3. If you do not have an Amazon Web Services (AWS) profile stored on your computer, enter the AWS access key ID and secret access key for the user that you configured to run the installation program.
    4. Select the AWS region to deploy the cluster to.
    5. Select the base domain for the Route 53 service that you configured for your cluster.
    6. Enter a descriptive name for your cluster.
    7. Paste the pull secret that you obtained from the Pull Secret page on the Red Hat OpenShift Cluster Manager site.
    Note

    If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

    When the cluster deployment completes, directions for accessing your cluster, including a link to its web console and credentials for the kubeadmin user, display in your terminal.

    Important

    The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.

    Important

    You must not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

  2. Optional: Remove or disable the AdministratorAccess policy from the IAM account that you used to install the cluster.

2.3.6. Installing the CLI by downloading the binary

You can install the OpenShift CLI (oc) in order to interact with OpenShift Container Platform from a command-line interface. You can install oc on Linux, Windows, or macOS.

Important

If you installed an earlier version of oc, you cannot use it to complete all of the commands in OpenShift Container Platform 4.5. Download and install the new version of oc.

2.3.6.1. Installing the CLI on Linux

You can install the OpenShift CLI (oc) binary on Linux by using the following procedure.

Procedure

  1. Navigate to the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site.
  2. Select your infrastructure provider, and, if applicable, your installation type.
  3. In the Command line interface section, select Linux from the drop-down menu and click Download command-line tools.
  4. Unpack the archive:

    $ tar xvzf <file>
  5. Place the oc binary in a directory that is on your PATH.

    To check your PATH, execute the following command:

    $ echo $PATH

After you install the CLI, it is available using the oc command:

$ oc <command>

2.3.6.2. Installing the CLI on Windows

You can install the OpenShift CLI (oc) binary on Windows by using the following procedure.

Procedure

  1. Navigate to the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site.
  2. Select your infrastructure provider, and, if applicable, your installation type.
  3. In the Command line interface section, select Windows from the drop-down menu and click Download command-line tools.
  4. Unzip the archive with a ZIP program.
  5. Move the oc binary to a directory that is on your PATH.

    To check your PATH, open the command prompt and execute the following command:

    C:\> path

After you install the CLI, it is available using the oc command:

C:\> oc <command>

2.3.6.3. Installing the CLI on macOS

You can install the OpenShift CLI (oc) binary on macOS by using the following procedure.

Procedure

  1. Navigate to the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site.
  2. Select your infrastructure provider, and, if applicable, your installation type.
  3. In the Command line interface section, select MacOS from the drop-down menu and click Download command-line tools.
  4. Unpack and unzip the archive.
  5. Move the oc binary to a directory on your PATH.

    To check your PATH, open a terminal and execute the following command:

    $ echo $PATH

After you install the CLI, it is available using the oc command:

$ oc <command>

2.3.7. Logging in to the cluster

You can log in to your cluster as a default system user by exporting the cluster kubeconfig file. The kubeconfig file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server. The file is specific to a cluster and is created during OpenShift Container Platform installation.

Prerequisites

  • Deploy an OpenShift Container Platform cluster.
  • Install the oc CLI.

Procedure

  1. Export the kubeadmin credentials:

    $ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1
    1
    For <installation_directory>, specify the path to the directory that you stored the installation files in.
  2. Verify you can run oc commands successfully using the exported configuration:

    $ oc whoami

    Example output

    system:admin

2.3.8. Next steps

2.4. Installing a cluster on AWS with customizations

In OpenShift Container Platform version 4.5, you can install a customized cluster on infrastructure that the installation program provisions on Amazon Web Services (AWS). To customize the installation, you modify parameters in the install-config.yaml file before you install the cluster.

2.4.1. Prerequisites

  • Review details about the OpenShift Container Platform installation and update processes.
  • Configure an AWS account to host the cluster.

    Important

    If you have an AWS profile stored on your computer, it must not use a temporary session token that you generated while using a multi-factor authentication device. The cluster continues to use your current AWS credentials to create AWS resources for the entire life of the cluster, so you must use long-lived credentials. To generate appropriate keys, see Managing Access Keys for IAM Users in the AWS documentation. You can supply the keys when you run the installation program.

  • If you use a firewall, you must configure it to allow the sites that your cluster requires access to.
  • If you do not allow the system to manage identity and access management (IAM), then a cluster administrator can manually create and maintain IAM credentials. Manual mode can also be used in environments where the cloud IAM APIs are not reachable.

2.4.2. Internet and Telemetry access for OpenShift Container Platform

In OpenShift Container Platform 4.5, you require access to the Internet to install your cluster. The Telemetry service, which runs by default to provide metrics about cluster health and the success of updates, also requires Internet access. If your cluster is connected to the Internet, Telemetry runs automatically, and your cluster is registered to the Red Hat OpenShift Cluster Manager (OCM).

Once you confirm that your Red Hat OpenShift Cluster Manager inventory is correct, either maintained automatically by Telemetry or manually using OCM, use subscription watch to track your OpenShift Container Platform subscriptions at the account or multi-cluster level.

You must have Internet access to:

  • Access the Red Hat OpenShift Cluster Manager page to download the installation program and perform subscription management. If the cluster has Internet access and you do not disable Telemetry, that service automatically entitles your cluster.
  • Access Quay.io to obtain the packages that are required to install your cluster.
  • Obtain the packages that are required to perform cluster updates.
Important

If your cluster cannot have direct Internet access, you can perform a restricted network installation on some types of infrastructure that you provision. During that process, you download the content that is required and use it to populate a mirror registry with the packages that you need to install a cluster and generate the installation program. With some installation types, the environment that you install your cluster in will not require Internet access. Before you update the cluster, you update the content of the mirror registry.

2.4.3. Generating an SSH private key and adding it to the agent

If you want to perform installation debugging or disaster recovery on your cluster, you must provide an SSH key to both your ssh-agent and the installation program. You can use this key to access the bootstrap machine in a public cluster to troubleshoot installation issues.

Note

In a production environment, you require disaster recovery and debugging.

You can use this key to SSH into the master nodes as the user core. When you deploy the cluster, the key is added to the core user’s ~/.ssh/authorized_keys list.

Note

You must use a local key, not one that you configured with platform-specific approaches such as AWS key pairs.

Procedure

  1. If you do not have an SSH key that is configured for password-less authentication on your computer, create one. For example, on a computer that uses a Linux operating system, run the following command:

    $ ssh-keygen -t ed25519 -N '' \
        -f <path>/<file_name> 1
    1
    Specify the path and file name, such as ~/.ssh/id_rsa, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.

    Running this command generates an SSH key that does not require a password in the location that you specified.

    Note

    If you plan to install an OpenShift Container Platform cluster that uses FIPS Validated / Modules in Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.

  2. Start the ssh-agent process as a background task:

    $ eval "$(ssh-agent -s)"

    Example output

    Agent pid 31874

If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.

  1. Add your SSH private key to the ssh-agent:

    $ ssh-add <path>/<file_name> 1

    Example output

    Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

    1
    Specify the path and file name for your SSH private key, such as ~/.ssh/id_rsa

Next steps

  • When you install OpenShift Container Platform, provide the SSH public key to the installation program.

2.4.4. Obtaining the installation program

Before you install OpenShift Container Platform, download the installation file on a local computer.

Prerequisites

  • You must install the cluster from a computer that uses Linux or macOS.
  • You need 500 MB of local disk space to download the installation program.

Procedure

  1. Access the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.
  2. Navigate to the page for your installation type, download the installation program for your operating system, and place the file in the directory where you will store the installation configuration files.

    Important

    The installation program creates several files on the computer that you use to install your cluster. You must keep both the installation program and the files that the installation program creates after you finish installing the cluster.

    Important

    Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. You must complete the OpenShift Container Platform uninstallation procedures outlined for your specific cloud provider to remove your cluster entirely.

  3. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

    $ tar xvf <installation_program>.tar.gz
  4. From the Pull Secret page on the Red Hat OpenShift Cluster Manager site, download your installation pull secret as a .txt file. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

2.4.5. Creating the installation configuration file

You can customize the OpenShift Container Platform cluster you install on Amazon Web Services (AWS).

Prerequisites

  • Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.

Procedure

  1. Create the install-config.yaml file.

    1. Run the following command:

      $ ./openshift-install create install-config --dir=<installation_directory> 1
      1
      For <installation_directory>, specify the directory name to store the files that the installation program creates.
      Important

      Specify an empty directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.

    2. At the prompts, provide the configuration details for your cloud:

      1. Optional: Select an SSH key to use to access your cluster machines.

        Note

        For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

      2. Select AWS as the platform to target.
      3. If you do not have an Amazon Web Services (AWS) profile stored on your computer, enter the AWS access key ID and secret access key for the user that you configured to run the installation program.
      4. Select the AWS region to deploy the cluster to.
      5. Select the base domain for the Route 53 service that you configured for your cluster.
      6. Enter a descriptive name for your cluster.
      7. Paste the pull secret that you obtained from the Pull Secret page on the Red Hat OpenShift Cluster Manager site.
  2. Modify the install-config.yaml file. You can find more information about the available parameters in the Installation configuration parameters section.
  3. Back up the install-config.yaml file so that you can use it to install multiple clusters.

    Important

    The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

2.4.5.1. Installation configuration parameters

Before you deploy an OpenShift Container Platform cluster, you provide parameter values to describe your account on the cloud platform that hosts your cluster and optionally customize your cluster’s platform. When you create the install-config.yaml installation configuration file, you provide values for the required parameters through the command line. If you customize your cluster, you can modify the install-config.yaml file to provide more details about the platform.

Note

After installation, you cannot modify these parameters in the install-config.yaml file.

Important

The openshift-install command does not validate field names for parameters. If an incorrect name is specified, the related file or object is not created, and no error is reported. Ensure that the field names for any parameters that are specified are correct.

2.4.5.1.1. Required configuration parameters

Required installation configuration parameters are described in the following table:

Table 2.1. Required parameters

ParameterDescriptionValues

apiVersion

The API version for the install-config.yaml content. The current version is v1. The installer may also support older API versions.

String

baseDomain

The base domain of your cloud provider. The base domain is used to create routes to your OpenShift Container Platform cluster components. The full DNS name for your cluster is a combination of the baseDomain and metadata.name parameter values that uses the <metadata.name>.<baseDomain> format.

A fully-qualified domain or subdomain name, such as example.com.

metadata

Kubernetes resource ObjectMeta, from which only the name parameter is consumed.

Object

metadata.name

The name of the cluster. DNS records for the cluster are all subdomains of {{.metadata.name}}.{{.baseDomain}}.

String of lowercase letters, hyphens (-), and periods (.), such as dev.

platform

The configuration for the specific platform upon which to perform the installation: aws, baremetal, azure, openstack, ovirt, vsphere. For additional information about platform.<platform> parameters, consult the following table for your specific platform.

Object

pullSecret

Get a pull secret from https://cloud.redhat.com/openshift/install/pull-secret to authenticate downloading container images for OpenShift Container Platform components from services such as Quay.io.

{
   "auths":{
      "cloud.openshift.com":{
         "auth":"b3Blb=",
         "email":"you@example.com"
      },
      "quay.io":{
         "auth":"b3Blb=",
         "email":"you@example.com"
      }
   }
}
2.4.5.1.2. Network configuration parameters

You can customize your installation configuration based on the requirements of your existing network infrastructure. For example, you can expand the IP address block for the cluster network or provide different IP address blocks than the defaults.

Only IPv4 addresses are supported.

Table 2.2. Network parameters

ParameterDescriptionValues

networking

The configuration for the cluster network.

Object

Note

You cannot modify parameters specified by the networking object after installation.

networking.networkType

The cluster network provider Container Network Interface (CNI) plug-in to install.

Either OpenShiftSDN or OVNKubernetes. The default value is OpenShiftSDN.

networking.clusterNetwork

The IP address blocks for pods.

The default value is 10.128.0.0/14 with a host prefix of /23.

If you specify multiple IP address blocks, the blocks must not overlap.

An array of objects. For example:

networking:
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23

networking.clusterNetwork.cidr

Required if you use networking.clusterNetwork. An IP address block.

An IPv4 network.

An IP address block in Classless Inter-Domain Routing (CIDR) notation. The prefix length for an IPv4 block is between 0 and 32.

networking.clusterNetwork.hostPrefix

The subnet prefix length to assign to each individual node. For example, if hostPrefix is set to 23 then each node is assigned a /23 subnet out of the given cidr. A hostPrefix value of 23 provides 510 (2^(32 - 23) - 2) pod IP addresses.

A subnet prefix.

The default value is 23.

networking.serviceNetwork

The IP address block for services. The default value is 172.30.0.0/16.

The OpenShift SDN and OVN-Kubernetes network providers support only a single IP address block for the service network.

An array with an IP address block in CIDR format. For example:

networking:
  serviceNetwork:
   - 172.30.0.0/16

networking.machineNetwork

The IP address blocks for machines.

If you specify multiple IP address blocks, the blocks must not overlap.

An array of objects. For example:

networking:
  machineNetwork:
  - cidr: 10.0.0.0/16

networking.machineNetwork.cidr

Required if you use networking.machineNetwork. An IP address block. The default value is 10.0.0.0/16 for all platforms other than libvirt. For libvirt, the default value is 192.168.126.0/24.

An IP network block in CIDR notation.

For example, 10.0.0.0/16.

Note

Set the networking.machineNetwork to match the CIDR that the preferred NIC resides in.

2.4.5.1.3. Optional configuration parameters

Optional installation configuration parameters are described in the following table:

Table 2.3. Optional parameters

ParameterDescriptionValues

additionalTrustBundle

A PEM-encoded X.509 certificate bundle that is added to the nodes' trusted certificate store. This trust bundle may also be used when a proxy has been configured.

String

compute

The configuration for the machines that comprise the compute nodes.

Array of machine-pool objects. For details, see the following "Machine-pool" table.

compute.architecture

Determines the instruction set architecture of the machines in the pool. Currently, heteregeneous clusters are not supported, so all pools must specify the same architecture. Valid values are amd64 (the default).

String

compute.hyperthreading

Whether to enable or disable simultaneous multithreading, or hyperthreading, on compute machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores.

Important

If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.

Enabled or Disabled

compute.name

Required if you use compute. The name of the machine pool.

worker

compute.platform

Required if you use compute. Use this parameter to specify the cloud provider to host the worker machines. This parameter value must match the controlPlane.platform parameter value.

aws, azure, gcp, openstack, ovirt, vsphere, or {}

compute.replicas

The number of compute machines, which are also known as worker machines, to provision.

A positive integer greater than or equal to 2. The default value is 3.

controlPlane

The configuration for the machines that comprise the control plane.

Array of MachinePool objects. For details, see the following "Machine-pool" table.

controlPlane.architecture

Determines the instruction set architecture of the machines in the pool. Currently, heterogeneous clusters are not supported, so all pools must specify the same architecture. Valid values are amd64 (the default).

String

controlPlane.hyperthreading

Whether to enable or disable simultaneous multithreading, or hyperthreading, on control plane machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores.

Important

If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.

Enabled or Disabled

controlPlane.name

Required if you use controlPlane. The name of the machine pool.

master

controlPlane.platform

Required if you use controlPlane. Use this parameter to specify the cloud provider that hosts the control plane machines. This parameter value must match the compute.platform parameter value.

aws, azure, gcp, openstack, ovirt, vsphere, or {}

controlPlane.replicas

The number of control plane machines to provision.

The only supported value is 3, which is the default value.

fips

Enable or disable FIPS mode. The default is false (disabled). If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead.

Note

If you are using Azure File storage, you cannot enable FIPS mode.

false or true

imageContentSources

Sources and repositories for the release-image content.

Array of objects. Includes a source and, optionally, mirrors, as described in the following rows of this table.

imageContentSources.source

Required if you use imageContentSources. Specify the repository that users refer to, for example, in image pull specifications.

String

imageContentSources.mirrors

Specify one or more repositories that may also contain the same images.

Array of strings

publish

How to publish or expose the user-facing endpoints of your cluster, such as the Kubernetes API, OpenShift routes.

Internal or External. To deploy a private cluster, which cannot be accessed from the internet, set publish to Internal. The default value is External.

sshKey

The SSH key to authenticate access to your cluster machines.

Note

For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

For example, sshKey: ssh-ed25519 AAAA...

2.4.5.1.4. Optional AWS configuration parameters

Optional AWS configuration parameters are described in the following table:

Table 2.4. Optional AWS parameters

ParameterDescriptionValues

compute.platform.aws.rootVolume.iops

The Input/Output Operations Per Second (IOPS) that is reserved for the root volume.

Integer, for example 4000.

compute.platform.aws.rootVolume.size

The size in GiB of the root volume.

Integer, for example 500.

compute.platform.aws.rootVolume.type

The instance type of the root volume.

Valid AWS EBS instance type, such as io1.

compute.platform.aws.type

The EC2 instance type for the compute machines.

Valid AWS instance type, such as c5.9xlarge.

compute.platform.aws.zones

The availability zones where the installation program creates machines for the compute machine pool. If you provide your own VPC, you must provide a subnet in that availability zone.

A list of valid AWS availability zones, such as us-east-1c, in a YAML sequence.

compute.aws.region

The AWS region that the installation program creates compute resources in.

Any valid AWS region, such as us-east-1.

controlPlane.platform.aws.type

The EC2 instance type for the control plane machines.

Valid AWS instance type, such as c5.9xlarge.

controlPlane.platform.aws.zones

The availability zones where the installation program creates machines for the control plane machine pool.

A list of valid AWS availability zones, such as us-east-1c, in a YAML sequence.

controlPlane.aws.region

The AWS region that the installation program creates control plane resources in.

Valid AWS region, such as us-east-1.

platform.aws.userTags

A map of keys and values that the installation program adds as tags to all resources that it creates.

Any valid YAML map, such as key value pairs in the <key>: <value> format. For more information about AWS tags, see Tagging Your Amazon EC2 Resources in the AWS documentation.

platform.aws.subnets

If you provide the VPC instead of allowing the installation program to create the VPC for you, specify the subnet for the cluster to use. The subnet must be part of the same machineNetwork[].cidr ranges that you specify. For a standard cluster, specify a public and a private subnet for each availability zone. For a private cluster, specify a private subnet for each availability zone.

Valid subnet IDs.

2.4.5.2. Sample customized install-config.yaml file for AWS

You can customize the install-config.yaml file to specify more details about your OpenShift Container Platform cluster’s platform or modify the values of the required parameters.

Important

This sample YAML file is provided for reference only. You must obtain your install-config.yaml file by using the installation program and modify it.

apiVersion: v1
baseDomain: example.com 1
controlPlane: 2
  hyperthreading: Enabled 3 4
  name: master
  platform:
    aws:
      zones:
      - us-west-2a
      - us-west-2b
      rootVolume:
        iops: 4000
        size: 500
        type: io1
      type: m5.xlarge 5
  replicas: 3
compute: 6
- hyperthreading: Enabled 7
  name: worker
  platform:
    aws:
      rootVolume:
        iops: 2000
        size: 500
        type: io1 8
      type: c5.4xlarge
      zones:
      - us-west-2c
  replicas: 3
metadata:
  name: test-cluster 9
networking:
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23
  machineNetwork:
  - cidr: 10.0.0.0/16
  networkType: OpenShiftSDN
  serviceNetwork:
  - 172.30.0.0/16
platform:
  aws:
    region: us-west-2 10
    userTags:
      adminContact: jdoe
      costCenter: 7536
fips: false 11
sshKey: ssh-ed25519 AAAA... 12
pullSecret: '{"auths": ...}' 13
1 9 10 13
Required. The installation program prompts you for this value.
2 6
If you do not provide these parameters and values, the installation program provides the default value.
3 7
The controlPlane section is a single mapping, but the compute section is a sequence of mappings. To meet the requirements of the different data structures, the first line of the compute section must begin with a hyphen, -, and the first line of the controlPlane section must not. Although both sections currently define a single machine pool, it is possible that future versions of OpenShift Container Platform will support defining multiple compute pools during installation. Only one control plane pool is used.
4 5
Whether to enable or disable simultaneous multithreading, or hyperthreading. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. You can disable it by setting the parameter value to Disabled. If you disable simultaneous multithreading in some cluster machines, you must disable it in all cluster machines.
Important

If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance. Use larger instance types, such as m4.2xlarge or m5.2xlarge, for your machines if you disable simultaneous multithreading.

8
To configure faster storage for etcd, especially for larger clusters, set the storage type as io1 and set iops to 2000.
11
Whether to enable or disable FIPS mode. By default, FIPS mode is not enabled. If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead.
12
You can optionally provide the sshKey value that you use to access the machines in your cluster.
You can optionally provide the sshKey value that you use to access the machines in your cluster.
Note

For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

2.4.6. Deploying the cluster

You can install OpenShift Container Platform on a compatible cloud platform.

Important

You can run the create cluster command of the installation program only once, during initial installation.

Prerequisites

  • Configure an account with the cloud platform that hosts your cluster.
  • Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.

Procedure

  1. Run the installation program:

    $ ./openshift-install create cluster --dir=<installation_directory> \ 1
        --log-level=info 2
    1
    For <installation_directory>, specify the location of your customized ./install-config.yaml file.
    2
    To view different installation details, specify warn, debug, or error instead of info.
    Note

    If the cloud provider account that you configured on your host does not have sufficient permissions to deploy the cluster, the installation process stops, and the missing permissions are displayed.

    When the cluster deployment completes, directions for accessing your cluster, including a link to its web console and credentials for the kubeadmin user, display in your terminal.

    Important

    The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.

    Important

    You must not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

  2. Optional: Remove or disable the AdministratorAccess policy from the IAM account that you used to install the cluster.

2.4.7. Installing the CLI by downloading the binary

You can install the OpenShift CLI (oc) in order to interact with OpenShift Container Platform from a command-line interface. You can install oc on Linux, Windows, or macOS.

Important

If you installed an earlier version of oc, you cannot use it to complete all of the commands in OpenShift Container Platform 4.5. Download and install the new version of oc.

2.4.7.1. Installing the CLI on Linux

You can install the OpenShift CLI (oc) binary on Linux by using the following procedure.

Procedure

  1. Navigate to the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site.
  2. Select your infrastructure provider, and, if applicable, your installation type.
  3. In the Command line interface section, select Linux from the drop-down menu and click Download command-line tools.
  4. Unpack the archive:

    $ tar xvzf <file>
  5. Place the oc binary in a directory that is on your PATH.

    To check your PATH, execute the following command:

    $ echo $PATH

After you install the CLI, it is available using the oc command:

$ oc <command>

2.4.7.2. Installing the CLI on Windows

You can install the OpenShift CLI (oc) binary on Windows by using the following procedure.

Procedure

  1. Navigate to the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site.
  2. Select your infrastructure provider, and, if applicable, your installation type.
  3. In the Command line interface section, select Windows from the drop-down menu and click Download command-line tools.
  4. Unzip the archive with a ZIP program.
  5. Move the oc binary to a directory that is on your PATH.

    To check your PATH, open the command prompt and execute the following command:

    C:\> path

After you install the CLI, it is available using the oc command:

C:\> oc <command>

2.4.7.3. Installing the CLI on macOS

You can install the OpenShift CLI (oc) binary on macOS by using the following procedure.

Procedure

  1. Navigate to the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site.
  2. Select your infrastructure provider, and, if applicable, your installation type.
  3. In the Command line interface section, select MacOS from the drop-down menu and click Download command-line tools.
  4. Unpack and unzip the archive.
  5. Move the oc binary to a directory on your PATH.

    To check your PATH, open a terminal and execute the following command:

    $ echo $PATH

After you install the CLI, it is available using the oc command:

$ oc <command>

2.4.8. Logging in to the cluster

You can log in to your cluster as a default system user by exporting the cluster kubeconfig file. The kubeconfig file contains information about the cluster that is used by the CLI to connect a client to the correct cluster and API server. The file is specific to a cluster and is created during OpenShift Container Platform installation.

Prerequisites

  • Deploy an OpenShift Container Platform cluster.
  • Install the oc CLI.

Procedure

  1. Export the kubeadmin credentials:

    $ export KUBECONFIG=<installation_directory>/auth/kubeconfig 1
    1
    For <installation_directory>, specify the path to the directory that you stored the installation files in.
  2. Verify you can run oc commands successfully using the exported configuration:

    $ oc whoami

    Example output

    system:admin

2.4.9. Next steps

2.5. Installing a cluster on AWS with network customizations

In OpenShift Container Platform version 4.5, you can install a cluster on Amazon Web Services (AWS) with customized network configuration options. By customizing your network configuration, your cluster can coexist with existing IP address allocations in your environment and integrate with existing MTU and VXLAN configurations.

You must set most of the network configuration parameters during installation, and you can modify only kubeProxy configuration parameters in a running cluster.

2.5.1. Prerequisites

  • Review details about the OpenShift Container Platform installation and update processes.
  • Configure an AWS account to host the cluster.

    Important

    If you have an AWS profile stored on your computer, it must not use a temporary session token that you generated while using a multi-factor authentication device. The cluster continues to use your current AWS credentials to create AWS resources for the entire life of the cluster, so you must use key-based, long-lived credentials. To generate appropriate keys, see Managing Access Keys for IAM Users in the AWS documentation. You can supply the keys when you run the installation program.

  • If you use a firewall, you must configure it to allow the sites that your cluster requires access to.
  • If you do not allow the system to manage identity and access management (IAM), then a cluster administrator can manually create and maintain IAM credentials. Manual mode can also be used in environments where the cloud IAM APIs are not reachable.

2.5.2. Internet and Telemetry access for OpenShift Container Platform

In OpenShift Container Platform 4.5, you require access to the Internet to install your cluster. The Telemetry service, which runs by default to provide metrics about cluster health and the success of updates, also requires Internet access. If your cluster is connected to the Internet, Telemetry runs automatically, and your cluster is registered to the Red Hat OpenShift Cluster Manager (OCM).

Once you confirm that your Red Hat OpenShift Cluster Manager inventory is correct, either maintained automatically by Telemetry or manually using OCM, use subscription watch to track your OpenShift Container Platform subscriptions at the account or multi-cluster level.

You must have Internet access to:

  • Access the Red Hat OpenShift Cluster Manager page to download the installation program and perform subscription management. If the cluster has Internet access and you do not disable Telemetry, that service automatically entitles your cluster.
  • Access Quay.io to obtain the packages that are required to install your cluster.
  • Obtain the packages that are required to perform cluster updates.
Important

If your cluster cannot have direct Internet access, you can perform a restricted network installation on some types of infrastructure that you provision. During that process, you download the content that is required and use it to populate a mirror registry with the packages that you need to install a cluster and generate the installation program. With some installation types, the environment that you install your cluster in will not require Internet access. Before you update the cluster, you update the content of the mirror registry.

2.5.3. Generating an SSH private key and adding it to the agent

If you want to perform installation debugging or disaster recovery on your cluster, you must provide an SSH key to both your ssh-agent and the installation program. You can use this key to access the bootstrap machine in a public cluster to troubleshoot installation issues.

Note

In a production environment, you require disaster recovery and debugging.

You can use this key to SSH into the master nodes as the user core. When you deploy the cluster, the key is added to the core user’s ~/.ssh/authorized_keys list.

Note

You must use a local key, not one that you configured with platform-specific approaches such as AWS key pairs.

Procedure

  1. If you do not have an SSH key that is configured for password-less authentication on your computer, create one. For example, on a computer that uses a Linux operating system, run the following command:

    $ ssh-keygen -t ed25519 -N '' \
        -f <path>/<file_name> 1
    1
    Specify the path and file name, such as ~/.ssh/id_rsa, of the new SSH key. If you have an existing key pair, ensure your public key is in the your ~/.ssh directory.

    Running this command generates an SSH key that does not require a password in the location that you specified.

    Note

    If you plan to install an OpenShift Container Platform cluster that uses FIPS Validated / Modules in Process cryptographic libraries on the x86_64 architecture, do not create a key that uses the ed25519 algorithm. Instead, create a key that uses the rsa or ecdsa algorithm.

  2. Start the ssh-agent process as a background task:

    $ eval "$(ssh-agent -s)"

    Example output

    Agent pid 31874

If your cluster is in FIPS mode, only use FIPS-compliant algorithms to generate the SSH key. The key must be either RSA or ECDSA.

  1. Add your SSH private key to the ssh-agent:

    $ ssh-add <path>/<file_name> 1

    Example output

    Identity added: /home/<you>/<path>/<file_name> (<computer_name>)

    1
    Specify the path and file name for your SSH private key, such as ~/.ssh/id_rsa

Next steps

  • When you install OpenShift Container Platform, provide the SSH public key to the installation program.

2.5.4. Obtaining the installation program

Before you install OpenShift Container Platform, download the installation file on a local computer.

Prerequisites

  • You must install the cluster from a computer that uses Linux or macOS.
  • You need 500 MB of local disk space to download the installation program.

Procedure

  1. Access the Infrastructure Provider page on the Red Hat OpenShift Cluster Manager site. If you have a Red Hat account, log in with your credentials. If you do not, create an account.
  2. Navigate to the page for your installation type, download the installation program for your operating system, and place the file in the directory where you will store the installation configuration files.

    Important

    The installation program creates several files on the computer that you use to install your cluster. You must keep both the installation program and the files that the installation program creates after you finish installing the cluster.

    Important

    Deleting the files created by the installation program does not remove your cluster, even if the cluster failed during installation. You must complete the OpenShift Container Platform uninstallation procedures outlined for your specific cloud provider to remove your cluster entirely.

  3. Extract the installation program. For example, on a computer that uses a Linux operating system, run the following command:

    $ tar xvf <installation_program>.tar.gz
  4. From the Pull Secret page on the Red Hat OpenShift Cluster Manager site, download your installation pull secret as a .txt file. This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for OpenShift Container Platform components.

2.5.5. Creating the installation configuration file

You can customize the OpenShift Container Platform cluster you install on Amazon Web Services (AWS).

Prerequisites

  • Obtain the OpenShift Container Platform installation program and the pull secret for your cluster.

Procedure

  1. Create the install-config.yaml file.

    1. Run the following command:

      $ ./openshift-install create install-config --dir=<installation_directory> 1
      1
      For <installation_directory>, specify the directory name to store the files that the installation program creates.
      Important

      Specify an empty directory. Some installation assets, like bootstrap X.509 certificates have short expiration intervals, so you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.

    2. At the prompts, provide the configuration details for your cloud:

      1. Optional: Select an SSH key to use to access your cluster machines.

        Note

        For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

      2. Select AWS as the platform to target.
      3. If you do not have an Amazon Web Services (AWS) profile stored on your computer, enter the AWS access key ID and secret access key for the user that you configured to run the installation program.
      4. Select the AWS region to deploy the cluster to.
      5. Select the base domain for the Route 53 service that you configured for your cluster.
      6. Enter a descriptive name for your cluster.
      7. Paste the pull secret that you obtained from the Pull Secret page on the Red Hat OpenShift Cluster Manager site.
  2. Modify the install-config.yaml file. You can find more information about the available parameters in the Installation configuration parameters section.
  3. Back up the install-config.yaml file so that you can use it to install multiple clusters.

    Important

    The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

2.5.5.1. Installation configuration parameters

Before you deploy an OpenShift Container Platform cluster, you provide parameter values to describe your account on the cloud platform that hosts your cluster and optionally customize your cluster’s platform. When you create the install-config.yaml installation configuration file, you provide values for the required parameters through the command line. If you customize your cluster, you can modify the install-config.yaml file to provide more details about the platform.

Note

After installation, you cannot modify these parameters in the install-config.yaml file.

Important

The openshift-install command does not validate field names for parameters. If an incorrect name is specified, the related file or object is not created, and no error is reported. Ensure that the field names for any parameters that are specified are correct.

2.5.5.1.1. Required configuration parameters

Required installation configuration parameters are described in the following table:

Table 2.5. Required parameters

ParameterDescriptionValues

apiVersion

The API version for the install-config.yaml content. The current version is v1. The installer may also support older API versions.

String

baseDomain

The base domain of your cloud provider. The base domain is used to create routes to your OpenShift Container Platform cluster components. The full DNS name for your cluster is a combination of the baseDomain and metadata.name parameter values that uses the <metadata.name>.<baseDomain> format.

A fully-qualified domain or subdomain name, such as example.com.

metadata

Kubernetes resource ObjectMeta, from which only the name parameter is consumed.

Object

metadata.name

The name of the cluster. DNS records for the cluster are all subdomains of {{.metadata.name}}.{{.baseDomain}}.

String of lowercase letters, hyphens (-), and periods (.), such as dev.

platform

The configuration for the specific platform upon which to perform the installation: aws, baremetal, azure, openstack, ovirt, vsphere. For additional information about platform.<platform> parameters, consult the following table for your specific platform.

Object

pullSecret

Get a pull secret from https://cloud.redhat.com/openshift/install/pull-secret to authenticate downloading container images for OpenShift Container Platform components from services such as Quay.io.

{
   "auths":{
      "cloud.openshift.com":{
         "auth":"b3Blb=",
         "email":"you@example.com"
      },
      "quay.io":{
         "auth":"b3Blb=",
         "email":"you@example.com"
      }
   }
}
2.5.5.1.2. Network configuration parameters

You can customize your installation configuration based on the requirements of your existing network infrastructure. For example, you can expand the IP address block for the cluster network or provide different IP address blocks than the defaults.

Only IPv4 addresses are supported.

Table 2.6. Network parameters

ParameterDescriptionValues

networking

The configuration for the cluster network.

Object

Note

You cannot modify parameters specified by the networking object after installation.

networking.networkType

The cluster network provider Container Network Interface (CNI) plug-in to install.

Either OpenShiftSDN or OVNKubernetes. The default value is OpenShiftSDN.

networking.clusterNetwork

The IP address blocks for pods.

The default value is 10.128.0.0/14 with a host prefix of /23.

If you specify multiple IP address blocks, the blocks must not overlap.

An array of objects. For example:

networking:
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23

networking.clusterNetwork.cidr

Required if you use networking.clusterNetwork. An IP address block.

An IPv4 network.

An IP address block in Classless Inter-Domain Routing (CIDR) notation. The prefix length for an IPv4 block is between 0 and 32.

networking.clusterNetwork.hostPrefix

The subnet prefix length to assign to each individual node. For example, if hostPrefix is set to 23 then each node is assigned a /23 subnet out of the given cidr. A hostPrefix value of 23 provides 510 (2^(32 - 23) - 2) pod IP addresses.

A subnet prefix.

The default value is 23.

networking.serviceNetwork

The IP address block for services. The default value is 172.30.0.0/16.

The OpenShift SDN and OVN-Kubernetes network providers support only a single IP address block for the service network.

An array with an IP address block in CIDR format. For example:

networking:
  serviceNetwork:
   - 172.30.0.0/16

networking.machineNetwork

The IP address blocks for machines.

If you specify multiple IP address blocks, the blocks must not overlap.

An array of objects. For example:

networking:
  machineNetwork:
  - cidr: 10.0.0.0/16

networking.machineNetwork.cidr

Required if you use networking.machineNetwork. An IP address block. The default value is 10.0.0.0/16 for all platforms other than libvirt. For libvirt, the default value is 192.168.126.0/24.

An IP network block in CIDR notation.

For example, 10.0.0.0/16.

Note

Set the networking.machineNetwork to match the CIDR that the preferred NIC resides in.

2.5.5.1.3. Optional configuration parameters

Optional installation configuration parameters are described in the following table:

Table 2.7. Optional parameters

ParameterDescriptionValues

additionalTrustBundle

A PEM-encoded X.509 certificate bundle that is added to the nodes' trusted certificate store. This trust bundle may also be used when a proxy has been configured.

String

compute

The configuration for the machines that comprise the compute nodes.

Array of machine-pool objects. For details, see the following "Machine-pool" table.

compute.architecture

Determines the instruction set architecture of the machines in the pool. Currently, heteregeneous clusters are not supported, so all pools must specify the same architecture. Valid values are amd64 (the default).

String

compute.hyperthreading

Whether to enable or disable simultaneous multithreading, or hyperthreading, on compute machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores.

Important

If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.

Enabled or Disabled

compute.name

Required if you use compute. The name of the machine pool.

worker

compute.platform

Required if you use compute. Use this parameter to specify the cloud provider to host the worker machines. This parameter value must match the controlPlane.platform parameter value.

aws, azure, gcp, openstack, ovirt, vsphere, or {}

compute.replicas

The number of compute machines, which are also known as worker machines, to provision.

A positive integer greater than or equal to 2. The default value is 3.

controlPlane

The configuration for the machines that comprise the control plane.

Array of MachinePool objects. For details, see the following "Machine-pool" table.

controlPlane.architecture

Determines the instruction set architecture of the machines in the pool. Currently, heterogeneous clusters are not supported, so all pools must specify the same architecture. Valid values are amd64 (the default).

String

controlPlane.hyperthreading

Whether to enable or disable simultaneous multithreading, or hyperthreading, on control plane machines. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores.

Important

If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance.

Enabled or Disabled

controlPlane.name

Required if you use controlPlane. The name of the machine pool.

master

controlPlane.platform

Required if you use controlPlane. Use this parameter to specify the cloud provider that hosts the control plane machines. This parameter value must match the compute.platform parameter value.

aws, azure, gcp, openstack, ovirt, vsphere, or {}

controlPlane.replicas

The number of control plane machines to provision.

The only supported value is 3, which is the default value.

fips

Enable or disable FIPS mode. The default is false (disabled). If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead.

Note

If you are using Azure File storage, you cannot enable FIPS mode.

false or true

imageContentSources

Sources and repositories for the release-image content.

Array of objects. Includes a source and, optionally, mirrors, as described in the following rows of this table.

imageContentSources.source

Required if you use imageContentSources. Specify the repository that users refer to, for example, in image pull specifications.

String

imageContentSources.mirrors

Specify one or more repositories that may also contain the same images.

Array of strings

publish

How to publish or expose the user-facing endpoints of your cluster, such as the Kubernetes API, OpenShift routes.

Internal or External. To deploy a private cluster, which cannot be accessed from the internet, set publish to Internal. The default value is External.

sshKey

The SSH key to authenticate access to your cluster machines.

Note

For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

For example, sshKey: ssh-ed25519 AAAA...

2.5.5.1.4. Optional AWS configuration parameters

Optional AWS configuration parameters are described in the following table:

Table 2.8. Optional AWS parameters

ParameterDescriptionValues

compute.platform.aws.rootVolume.iops

The Input/Output Operations Per Second (IOPS) that is reserved for the root volume.

Integer, for example 4000.

compute.platform.aws.rootVolume.size

The size in GiB of the root volume.

Integer, for example 500.

compute.platform.aws.rootVolume.type

The instance type of the root volume.

Valid AWS EBS instance type, such as io1.

compute.platform.aws.type

The EC2 instance type for the compute machines.

Valid AWS instance type, such as c5.9xlarge.

compute.platform.aws.zones

The availability zones where the installation program creates machines for the compute machine pool. If you provide your own VPC, you must provide a subnet in that availability zone.

A list of valid AWS availability zones, such as us-east-1c, in a YAML sequence.

compute.aws.region

The AWS region that the installation program creates compute resources in.

Any valid AWS region, such as us-east-1.

controlPlane.platform.aws.type

The EC2 instance type for the control plane machines.

Valid AWS instance type, such as c5.9xlarge.

controlPlane.platform.aws.zones

The availability zones where the installation program creates machines for the control plane machine pool.

A list of valid AWS availability zones, such as us-east-1c, in a YAML sequence.

controlPlane.aws.region

The AWS region that the installation program creates control plane resources in.

Valid AWS region, such as us-east-1.

platform.aws.userTags

A map of keys and values that the installation program adds as tags to all resources that it creates.

Any valid YAML map, such as key value pairs in the <key>: <value> format. For more information about AWS tags, see Tagging Your Amazon EC2 Resources in the AWS documentation.

platform.aws.subnets

If you provide the VPC instead of allowing the installation program to create the VPC for you, specify the subnet for the cluster to use. The subnet must be part of the same machineNetwork[].cidr ranges that you specify. For a standard cluster, specify a public and a private subnet for each availability zone. For a private cluster, specify a private subnet for each availability zone.

Valid subnet IDs.

Important

The Open Virtual Networking (OVN) Kubernetes network plug-in is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of the OVN Technology Preview, see https://access.redhat.com/articles/4380121.

2.5.5.2. Network configuration parameters

You can modify your cluster network configuration parameters in the install-config.yaml configuration file. The following table describes the parameters.

Note

You cannot modify these parameters in the install-config.yaml file after installation.

Table 2.9. Required network parameters

ParameterDescriptionValue

networking.networkType

The default Container Network Interface (CNI) network provider plug-in to deploy. The OpenShiftSDN plug-in is the only plug-in supported in OpenShift Container Platform 4.5. The OVNKubernetes plug-in is available as a Technology Preview in OpenShift Container Platform 4.5.

Either OpenShiftSDN or OVNKubernetes. The default value is OpenShiftSDN.

networking.clusterNetwork[].cidr

A block of IP addresses from which pod IP addresses are allocated. The OpenShiftSDN network plug-in supports multiple cluster networks. The address blocks for multiple cluster networks must not overlap. Select address pools large enough to fit your anticipated workload.

An IP address allocation in CIDR format. The default value is 10.128.0.0/14.

networking.clusterNetwork[].hostPrefix

The subnet prefix length to assign to each individual node. For example, if hostPrefix is set to 23, then each node is assigned a /23 subnet out of the given cidr, allowing for 510 (2^(32 - 23) - 2) pod IP addresses.

A subnet prefix. The default value is 23.

networking.serviceNetwork[]

A block of IP addresses for services. OpenShiftSDN allows only one serviceNetwork block. The address block must not overlap with any other network block.

An IP address allocation in CIDR format. The default value is 172.30.0.0/16.

networking.machineNetwork[].cidr

A block of IP addresses assigned to nodes created by the OpenShift Container Platform installation program while installing the cluster. The address block must not overlap with any other network block. Multiple CIDR ranges may be specified.

An IP address allocation in CIDR format. The default value is 10.0.0.0/16.

2.5.5.3. Sample customized install-config.yaml file for AWS

You can customize the install-config.yaml file to specify more details about your OpenShift Container Platform cluster’s platform or modify the values of the required parameters.

Important

This sample YAML file is provided for reference only. You must obtain your install-config.yaml file by using the installation program and modify it.

apiVersion: v1
baseDomain: example.com 1
controlPlane: 2
  hyperthreading: Enabled 3 4
  name: master
  platform:
    aws:
      zones:
      - us-west-2a
      - us-west-2b
      rootVolume:
        iops: 4000
        size: 500
        type: io1
      type: m5.xlarge 5
  replicas: 3
compute: 6
- hyperthreading: Enabled 7
  name: worker
  platform:
    aws:
      rootVolume:
        iops: 2000
        size: 500
        type: io1 8
      type: c5.4xlarge
      zones:
      - us-west-2c
  replicas: 3
metadata:
  name: test-cluster 9
networking: 10
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23
  machineNetwork:
  - cidr: 10.0.0.0/16
  networkType: OpenShiftSDN
  serviceNetwork:
  - 172.30.0.0/16
platform:
  aws:
    region: us-west-2 11
    userTags:
      adminContact: jdoe
      costCenter: 7536
fips: false 12
sshKey: ssh-ed25519 AAAA... 13
pullSecret: '{"auths": ...}' 14
1 9 11 14
Required. The installation program prompts you for this value.
2 6 10
If you do not provide these parameters and values, the installation program provides the default value.
3 7
The controlPlane section is a single mapping, but the compute section is a sequence of mappings. To meet the requirements of the different data structures, the first line of the compute section must begin with a hyphen, -, and the first line of the controlPlane section must not. Although both sections currently define a single machine pool, it is possible that future versions of OpenShift Container Platform will support defining multiple compute pools during installation. Only one control plane pool is used.
4 5
Whether to enable or disable simultaneous multithreading, or hyperthreading. By default, simultaneous multithreading is enabled to increase the performance of your machines' cores. You can disable it by setting the parameter value to Disabled. If you disable simultaneous multithreading in some cluster machines, you must disable it in all cluster machines.
Important

If you disable simultaneous multithreading, ensure that your capacity planning accounts for the dramatically decreased machine performance. Use larger instance types, such as m4.2xlarge or m5.2xlarge, for your machines if you disable simultaneous multithreading.

8
To configure faster storage for etcd, especially for larger clusters, set the storage type as io1 and set iops to 2000.
12
Whether to enable or disable FIPS mode. By default, FIPS mode is not enabled. If FIPS mode is enabled, the Red Hat Enterprise Linux CoreOS (RHCOS) machines that OpenShift Container Platform runs on bypass the default Kubernetes cryptography suite and use the cryptography modules that are provided with RHCOS instead.
13
You can optionally provide the sshKey value that you use to access the machines in your cluster.
You can optionally provide the sshKey value that you use to access the machines in your cluster.
Note

For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

2.5.6. Modifying advanced network configuration parameters

You can modify the advanced network configuration parameters only before you install the cluster. Advanced configuration customization lets you integrate your cluster into your existing network environment by specifying an MTU or VXLAN port, by allowing customization of kube-proxy settings, and by specifying a different mode for the openshiftSDNConfig parameter.

Important

Modifying the OpenShift Container Platform manifest files created by the installation program is not supported. Applying a manifest file that you create, as in the following procedure, is supported.

Prerequisites

  • Create the install-config.yaml file and complete any modifications to it.

Procedure

  1. Use the following command to create manifests:

    $ ./openshift-install create manifests --dir=<installation_directory> 1
    1
    For <installation_directory>, specify the name of the directory that contains the install-config.yaml file for your cluster.
  2. Create a file that is named cluster-network-03-config.yml in the <installation_directory>/manifests/ directory:

    $ touch <installation_directory>/manifests/cluster-network-03-config.yml 1
    1
    For <installation_directory>, specify the directory name that contains the manifests/ directory for your cluster.

    After creating the file, several network configuration files are in the manifests/ directory, as shown:

    $ ls <installation_directory>/manifests/cluster-network-*

    Example output

    cluster-network-01-crd.yml
    cluster-network-02-config.yml
    cluster-network-03-config.yml

  3. Open the cluster-network-03-config.yml file in an editor and enter a CR that describes the Operator configuration you want:

    apiVersion: operator.openshift.io/v1
    kind: Network
    metadata:
      name: cluster
    spec: 1
      clusterNetwork:
      - cidr: 10.128.0.0/14
        hostPrefix: 23
      serviceNetwork:
      - 172.30.0.0/16
      defaultNetwork:
        type: OpenShiftSDN
        openshiftSDNConfig:
          mode: NetworkPolicy
          mtu: 1450
          vxlanPort: 4789
    1
    The parameters for the spec parameter are only an example. Specify your configuration for the Cluster Network Operator in the CR.

    The CNO provides default values for the parameters in the CR, so you must specify only the parameters that you want to change.

  4. Save the cluster-network-03-config.yml file and quit the text editor.
  5. Optional: Back up the manifests/cluster-network-03-config.yml file. The installation program deletes the manifests/ directory when creating the cluster.

2.5.7. Cluster Network Operator configuration

The configuration for the cluster network is specified as part of the Cluster Network Operator (CNO) configuration and stored in a CR object that is named cluster. The CR specifies the parameters for the Network API in the operator.openshift.io API group.

You can specify the cluster network configuration for your OpenShift Container Platform cluster by setting the parameter values for the defaultNetwork parameter in the CNO CR. The following CR displays the default configuration for the CNO and explains both the parameters you can configure and the valid parameter values:

Cluster Network Operator CR

apiVersion: operator.openshift.io/v1
kind: Network
metadata:
  name: cluster
spec:
  clusterNetwork: 1
  - cidr: 10.128.0.0/14
    hostPrefix: 23
  serviceNetwork: 2
  - 172.30.0.0/16
  defaultNetwork: 3
    ...
  kubeProxyConfig: 4
    iptablesSyncPeriod: 30s 5
    proxyArguments:
      iptables-min-sync-period: 6
      - 0s

1 2
Specified in the install-config.yaml file.
3
Configures the default Container Network Interface (CNI) network provider for the cluster network.
4
The parameters for this object specify the kube-proxy configuration. If you do not specify the parameter values, the Cluster Network Operator applies the displayed default parameter values. If you are using the OVN-Kubernetes default CNI network provider, the kube-proxy configuration has no effect.
5
The refresh period for iptables rules. The default value is 30s. Valid suffixes include s, m, and h and are described in the Go time package documentation.
Note

Because of performance improvements introduced in OpenShift Container Platform 4.3 and greater, adjusting the iptablesSyncPeriod parameter is no longer necessary.

6
The minimum duration before refreshing iptables rules. This parameter ensures that the refresh does not happen too frequently. Valid suffixes include s, m, and h and are described in the Go time package.

2.5.7.1. Configuration parameters for the OpenShift SDN default CNI network provider

The following YAML object describes the configuration parameters for the OpenShift SDN default Container Network Interface (CNI) network provider.

defaultNetwork:
  type: OpenShiftSDN 1
  openshiftSDNConfig: 2
    mode: NetworkPolicy 3
    mtu: 1450 4
    vxlanPort: 4789 5
1
Specified in the install-config.yaml file.
2
Specify only if you want to override part of the OpenShift SDN configuration.
3
Configures the network isolation mode for OpenShift SDN. The allowed values are