Specialized hardware and driver enablement

OpenShift Container Platform 4.11

Learn about hardware enablement on OpenShift Container Platform

Red Hat OpenShift Documentation Team

Abstract

This document provides an overview of hardware enablement in OpenShift Container Platform.

Chapter 1. About specialized hardware and driver enablement

Many applications require specialized hardware or software that depends on kernel modules or drivers. You can use driver containers to load out-of-tree kernel modules on Red Hat Enterprise Linux CoreOS (RHCOS) nodes. To deploy out-of-tree drivers during cluster installation, use the kmods-via-containers framework. To load drivers or kernel modules on an existing OpenShift Container Platform cluster, OpenShift Container Platform offers several tools:

  • The Driver Toolkit is a container image that is a part of every OpenShift Container Platform release. It contains the kernel packages and other common dependencies that are needed to build a driver or kernel module. The Driver Toolkit can be used as a base image for driver container image builds on OpenShift Container Platform.
  • The Special Resource Operator (SRO) orchestrates the building and management of driver containers to load kernel modules and drivers on an existing OpenShift or Kubernetes cluster.
  • The Node Feature Discovery (NFD) Operator adds node labels for CPU capabilities, kernel version, PCIe device vendor IDs, and more.

Chapter 2. Driver Toolkit

Learn about the Driver Toolkit and how you can use it as a base image for driver containers for enabling special software and hardware devices on Kubernetes.

Important

The Driver Toolkit is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

2.1. About the Driver Toolkit

Background

The Driver Toolkit is a container image in the OpenShift Container Platform payload used as a base image on which you can build driver containers. The Driver Toolkit image contains the kernel packages commonly required as dependencies to build or install kernel modules, as well as a few tools needed in driver containers. The version of these packages will match the kernel version running on the Red Hat Enterprise Linux CoreOS (RHCOS) nodes in the corresponding OpenShift Container Platform release.

Driver containers are container images used for building and deploying out-of-tree kernel modules and drivers on container operating systems like RHCOS. Kernel modules and drivers are software libraries running with a high level of privilege in the operating system kernel. They extend the kernel functionalities or provide the hardware-specific code required to control new devices. Examples include hardware devices like Field Programmable Gate Arrays (FPGA) or GPUs, and software-defined storage (SDS) solutions, such as Lustre parallel file systems, which require kernel modules on client machines. Driver containers are the first layer of the software stack used to enable these technologies on Kubernetes.

The list of kernel packages in the Driver Toolkit includes the following and their dependencies:

  • kernel-core
  • kernel-devel
  • kernel-headers
  • kernel-modules
  • kernel-modules-extra

In addition, the Driver Toolkit also includes the corresponding real-time kernel packages:

  • kernel-rt-core
  • kernel-rt-devel
  • kernel-rt-modules
  • kernel-rt-modules-extra

The Driver Toolkit also has several tools which are commonly needed to build and install kernel modules, including:

  • elfutils-libelf-devel
  • kmod
  • binutilskabi-dw
  • kernel-abi-whitelists
  • dependencies for the above

Purpose

Prior to the Driver Toolkit’s existence, you could install kernel packages in a pod or build config on OpenShift Container Platform using entitled builds or by installing from the kernel RPMs in the hosts machine-os-content. The Driver Toolkit simplifies the process by removing the entitlement step, and avoids the privileged operation of accessing the machine-os-content in a pod. The Driver Toolkit can also be used by partners who have access to pre-released OpenShift Container Platform versions to prebuild driver-containers for their hardware devices for future OpenShift Container Platform releases.

The Driver Toolkit is also used by the Special Resource Operator (SRO), which is currently available as a community Operator on OperatorHub. SRO supports out-of-tree and third-party kernel drivers and the support software for the underlying operating system. Users can create recipes for SRO to build and deploy a driver container, as well as support software like a device plugin, or metrics. Recipes can include a build config to build a driver container based on the Driver Toolkit, or SRO can deploy a prebuilt driver container.

2.2. Pulling the Driver Toolkit container image

The driver-toolkit image is available from the Container images section of the Red Hat Ecosystem Catalog and in the OpenShift Container Platform release payload. The image corresponding to the most recent minor release of OpenShift Container Platform will be tagged with the version number in the catalog. The image URL for a specific release can be found using the oc adm CLI command.

2.2.1. Pulling the Driver Toolkit container image from registry.redhat.io

Instructions for pulling the driver-toolkit image from registry.redhat.io with podman or in OpenShift Container Platform can be found on the Red Hat Ecosystem Catalog. The driver-toolkit image for the latest minor release will be tagged with the minor release version on registry.redhat.io for example registry.redhat.io/openshift4/driver-toolkit-rhel8:v4.11.

2.2.2. Finding the Driver Toolkit image URL in the payload

Prerequisites

Procedure

  1. The image URL of the driver-toolkit corresponding to a certain release can be extracted from the release image using the oc adm command:

    • For an x86 image, the command is as follows: 

      $ oc adm release info quay.io/openshift-release-dev/ocp-release:{product-version}.z-x86_64 --image-for=driver-toolkit

    • For an ARM image, the command is as follows: 

      $ oc adm release info quay.io/openshift-release-dev/ocp-release:{product-version}.z-aarch64 --image-for=driver-toolkit

    Example output

    The output for the ocp-release:4.11.0-x86_64 image is as follows: 

    quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:514e256367e8707e2c30f18a4f06fbd6c821ab9776602d2488e861f577a357d0

  2. This image can be pulled using a valid pull secret, such as the pull secret required to install OpenShift Container Platform. 

    $ podman pull --authfile=path/to/pullsecret.json quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:<SHA>
Important

ARM images are built for 64-bit Arm (AArch64) only, and are currently a Technology Preview feature. For more information about OpenShift Container Platform on ARM, see Release Notes. For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

2.3. Using the Driver Toolkit

As an example, the Driver Toolkit can be used as the base image for building a very simple kernel module called simple-kmod.

Note

The Driver Toolkit contains the necessary dependencies, openssl, mokutil, and keyutils, needed to sign a kernel module. However, in this example, the simple-kmod kernel module is not signed and therefore cannot be loaded on systems with Secure Boot enabled.

2.3.1. Build and run the simple-kmod driver container on a cluster

Prerequisites

  • You have a running OpenShift Container Platform cluster.
  • You set the Image Registry Operator state to Managed for your cluster.
  • You installed the OpenShift CLI (oc).
  • You are logged into the OpenShift CLI as a user with cluster-admin privileges.

Procedure

Create a namespace. For example: 

$ oc new-project simple-kmod-demo

  1. The YAML defines an ImageStream for storing the simple-kmod driver container image, and a BuildConfig for building the container. Save this YAML as 0000-buildconfig.yaml.template. 

    apiVersion: image.openshift.io/v1
kind: ImageStream
metadata:
  labels:
    app: simple-kmod-driver-container
  name: simple-kmod-driver-container
  namespace: simple-kmod-demo
spec: {}
---
apiVersion: build.openshift.io/v1
kind: BuildConfig
metadata:
  labels:
    app: simple-kmod-driver-build
  name: simple-kmod-driver-build
  namespace: simple-kmod-demo
spec:
  nodeSelector:
    node-role.kubernetes.io/worker: ""
  runPolicy: "Serial"
  triggers:
    - type: "ConfigChange"
    - type: "ImageChange"
  source:
    git:
      ref: "master"
      uri: "https://github.com/openshift-psap/kvc-simple-kmod.git"
    type: Git
    dockerfile: |
      FROM DRIVER_TOOLKIT_IMAGE

      WORKDIR /build/

      # Expecting kmod software version as an input to the build
      ARG KMODVER

      # Grab the software from upstream
      RUN git clone https://github.com/openshift-psap/simple-kmod.git
      WORKDIR simple-kmod

      # Build and install the module
      RUN make all       KVER=$(rpm -q --qf "%{VERSION}-%{RELEASE}.%{ARCH}"  kernel-core) KMODVER=${KMODVER} \
      && make install   KVER=$(rpm -q --qf "%{VERSION}-%{RELEASE}.%{ARCH}"  kernel-core) KMODVER=${KMODVER}

      # Add the helper tools
      WORKDIR /root/kvc-simple-kmod
      ADD Makefile .
      ADD simple-kmod-lib.sh .
      ADD simple-kmod-wrapper.sh .
      ADD simple-kmod.conf .
      RUN mkdir -p /usr/lib/kvc/ \
      && mkdir -p /etc/kvc/ \
      && make install

      RUN systemctl enable kmods-via-containers@simple-kmod
  strategy:
    dockerStrategy:
      buildArgs:
        - name: KMODVER
          value: DEMO
  output:
    to:
      kind: ImageStreamTag
      name: simple-kmod-driver-container:demo

  2. Substitute the correct driver toolkit image for the OpenShift Container Platform version you are running in place of “DRIVER_TOOLKIT_IMAGE” with the following commands. 

    $ OCP_VERSION=$(oc get clusterversion/version -ojsonpath={.status.desired.version})
    $ DRIVER_TOOLKIT_IMAGE=$(oc adm release info $OCP_VERSION --image-for=driver-toolkit)
    $ sed "s#DRIVER_TOOLKIT_IMAGE#${DRIVER_TOOLKIT_IMAGE}#" 0000-buildconfig.yaml.template > 0000-buildconfig.yaml

  3. Create the image stream and build config with 

    $ oc create -f 0000-buildconfig.yaml

  4. After the builder pod completes successfully, deploy the driver container image as a DaemonSet.

    1. The driver container must run with the privileged security context in order to load the kernel modules on the host. The following YAML file contains the RBAC rules and the DaemonSet for running the driver container. Save this YAML as 1000-drivercontainer.yaml. 

      apiVersion: v1
kind: ServiceAccount
metadata:
  name: simple-kmod-driver-container
---
apiVersion: rbac.authorization.k8s.io/v1
kind: Role
metadata:
  name: simple-kmod-driver-container
rules:
- apiGroups:
  - security.openshift.io
  resources:
  - securitycontextconstraints
  verbs:
  - use
  resourceNames:
  - privileged
---
apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  name: simple-kmod-driver-container
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: simple-kmod-driver-container
subjects:
- kind: ServiceAccount
  name: simple-kmod-driver-container
userNames:
- system:serviceaccount:simple-kmod-demo:simple-kmod-driver-container
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: simple-kmod-driver-container
spec:
  selector:
    matchLabels:
      app: simple-kmod-driver-container
  template:
    metadata:
      labels:
        app: simple-kmod-driver-container
    spec:
      serviceAccount: simple-kmod-driver-container
      serviceAccountName: simple-kmod-driver-container
      containers:
      - image: image-registry.openshift-image-registry.svc:5000/simple-kmod-demo/simple-kmod-driver-container:demo
        name: simple-kmod-driver-container
        imagePullPolicy: Always
        command: ["/sbin/init"]
        lifecycle:
          preStop:
            exec:
              command: ["/bin/sh", "-c", "systemctl stop kmods-via-containers@simple-kmod"]
        securityContext:
          privileged: true
      nodeSelector:
        node-role.kubernetes.io/worker: ""

    2. Create the RBAC rules and daemon set: 

      $ oc create -f 1000-drivercontainer.yaml

  5. After the pods are running on the worker nodes, verify that the simple_kmod kernel module is loaded successfully on the host machines with lsmod.

    1. Verify that the pods are running: 

      $ oc get pod -n simple-kmod-demo

      Example output

      NAME                                 READY   STATUS      RESTARTS   AGE
simple-kmod-driver-build-1-build     0/1     Completed   0          6m
simple-kmod-driver-container-b22fd   1/1     Running     0          40s
simple-kmod-driver-container-jz9vn   1/1     Running     0          40s
simple-kmod-driver-container-p45cc   1/1     Running     0          40s

    2. Execute the lsmod command in the driver container pod: 

      $ oc exec -it pod/simple-kmod-driver-container-p45cc -- lsmod | grep simple

      Example output

      simple_procfs_kmod     16384  0
simple_kmod            16384  0

2.4. Additional resources

Chapter 3. Special Resource Operator

Learn about the Special Resource Operator (SRO) and how you can use it to build and manage driver containers for loading kernel modules and device drivers on nodes in an OpenShift Container Platform cluster.

Important

The Special Resource Operator is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

3.1. About the Special Resource Operator

The Special Resource Operator (SRO) helps you manage the deployment of kernel modules and drivers on an existing OpenShift Container Platform cluster. The SRO can be used for a case as simple as building and loading a single kernel module, or as complex as deploying the driver, device plugin, and monitoring stack for a hardware accelerator.

For loading kernel modules, the SRO is designed around the use of driver containers. Driver containers are increasingly being used in cloud-native environments, especially when run on pure container operating systems, to deliver hardware drivers to the host. Driver containers extend the kernel stack beyond the out-of-the-box software and hardware features of a specific kernel. Driver containers work on various container-capable Linux distributions. With driver containers, the host operating system stays clean and there is no clash between different library versions or binaries on the host.

Note

The functions described require a connected environment with a constant connection to the network. These functions are not available for disconnected environments.

3.2. Installing the Special Resource Operator

As a cluster administrator, you can install the Special Resource Operator (SRO) by using the OpenShift CLI or the web console.

3.2.1. Installing the Special Resource Operator by using the CLI

As a cluster administrator, you can install the Special Resource Operator (SRO) by using the OpenShift CLI.

Prerequisites

  • You have a running OpenShift Container Platform cluster.
  • You installed the OpenShift CLI (oc).
  • You are logged into the OpenShift CLI as a user with cluster-admin privileges.

Procedure

  1. Install the SRO in the openshift-operators namespace:

    1. Create the following Subscription CR and save the YAML in the sro-sub.yaml file:

      Example Subscription CR

      apiVersion: operators.coreos.com/v1alpha1
kind: Subscription
metadata:
  name: openshift-special-resource-operator
  namespace: openshift-operators
spec:
  channel: "stable"
  installPlanApproval: Automatic
  name: openshift-special-resource-operator
  source: redhat-operators
  sourceNamespace: openshift-marketplace

    2. Create the subscription object by running the following command: 

      $ oc create -f sro-sub.yaml

    3. Switch to the openshift-operators project: 

      $ oc project openshift-operators

Verification

  • To verify that the Operator deployment is successful, run: 

    $ oc get pods

    Example output

    NAME                                                   READY   STATUS    RESTARTS   AGE
nfd-controller-manager-7f4c5f5778-4lvvk                2/2     Running   0          89s
special-resource-controller-manager-6dbf7d4f6f-9kl8h   2/2     Running   0          81s

    A successful deployment shows a Running status.

3.2.2. Installing the Special Resource Operator by using the web console

As a cluster administrator, you can install the Special Resource Operator (SRO) by using the OpenShift Container Platform web console.

Procedure

  1. Log in to the OpenShift Container Platform web console.

  2. Install the Special Resource Operator:

    1. In the OpenShift Container Platform web console, click Operators → OperatorHub.
    2. Choose Special Resource Operator from the list of available Operators, and then click Install.
    3. On the Install Operator page, select a specific namespace on the cluster, select the namespace created in the previous section, and then click Install.

Verification

To verify that the Special Resource Operator installed successfully:

  1. Navigate to the Operators → Installed Operators page.

  2. Ensure that Special Resource Operator is listed in the openshift-operators project with a Status of InstallSucceeded.

    Note

    During installation, an Operator might display a Failed status. If the installation later succeeds with an InstallSucceeded message, you can ignore the Failed message.

  3. If the Operator does not appear as installed, to troubleshoot further:

    1. Navigate to the Operators → Installed Operators page and inspect the Operator Subscriptions and Install Plans tabs for any failure or errors under Status.
    2. Navigate to the Workloads → Pods page and check the logs for pods in the openshift-operators project.

3.3. Using the Special Resource Operator

The Special Resource Operator (SRO) is used to manage the build and deployment of a driver container. The objects required to build and deploy the container can be defined in a Helm chart.

The example in this section uses the simple-kmod SpecialResource object to point to a ConfigMap object that is created to store the Helm charts.

3.3.1. Building and running the simple-kmod SpecialResource by using a config map

In this example, the simple-kmod kernel module shows how the Special Resource Operator (SRO) manages a driver container. The container is defined in the Helm chart templates that are stored in a config map.

Prerequisites

  • You have a running OpenShift Container Platform cluster.
  • You set the Image Registry Operator state to Managed for your cluster.
  • You installed the OpenShift CLI (oc).
  • You are logged into the OpenShift CLI as a user with cluster-admin privileges.
  • You installed the Node Feature Discovery (NFD) Operator.
  • You installed the SRO.
  • You installed the Helm CLI (helm).

Procedure

  1. To create a simple-kmod SpecialResource object, define an image stream and build config to build the image, and a service account, role, role binding, and daemon set to run the container. The service account, role, and role binding are required to run the daemon set with the privileged security context so that the kernel module can be loaded.

    1. Create a templates directory, and change into it: 

      $ mkdir -p chart/simple-kmod-0.0.1/templates
      $ cd chart/simple-kmod-0.0.1/templates

    2. Save this YAML template for the image stream and build config in the templates directory as 0000-buildconfig.yaml: 

      apiVersion: image.openshift.io/v1
kind: ImageStream
metadata:
  labels:
    app: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}} 1
  name: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}} 2
spec: {}
---
apiVersion: build.openshift.io/v1
kind: BuildConfig
metadata:
  labels:
    app: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverBuild}}  3
  name: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverBuild}} 4
  annotations:
    specialresource.openshift.io/wait: "true"
    specialresource.openshift.io/driver-container-vendor: simple-kmod
    specialresource.openshift.io/kernel-affine: "true"
spec:
  nodeSelector:
    node-role.kubernetes.io/worker: ""
  runPolicy: "Serial"
  triggers:
    - type: "ConfigChange"
    - type: "ImageChange"
  source:
    git:
      ref: {{.Values.specialresource.spec.driverContainer.source.git.ref}}
      uri: {{.Values.specialresource.spec.driverContainer.source.git.uri}}
    type: Git
  strategy:
    dockerStrategy:
      dockerfilePath: Dockerfile.SRO
      buildArgs:
        - name: "IMAGE"
          value: {{ .Values.driverToolkitImage  }}
        {{- range $arg := .Values.buildArgs }}
        - name: {{ $arg.name }}
          value: {{ $arg.value }}
        {{- end }}
        - name: KVER
          value: {{ .Values.kernelFullVersion }}
  output:
    to:
      kind: ImageStreamTag
      name: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}}:v{{.Values.kernelFullVersion}} 5
      1 2 3 4 5
      The templates such as {{.Values.specialresource.metadata.name}} are filled in by the SRO, based on fields in the SpecialResource CR and variables known to the Operator such as {{.Values.KernelFullVersion}}.

    3. Save the following YAML template for the RBAC resources and daemon set in the templates directory as 1000-driver-container.yaml: 

      apiVersion: v1
kind: ServiceAccount
metadata:
  name: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}}
---
apiVersion: rbac.authorization.k8s.io/v1
kind: Role
metadata:
  name: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}}
rules:
- apiGroups:
  - security.openshift.io
  resources:
  - securitycontextconstraints
  verbs:
  - use
  resourceNames:
  - privileged
---
apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  name: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}}
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}}
subjects:
- kind: ServiceAccount
  name: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}}
  namespace: {{.Values.specialresource.spec.namespace}}
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  labels:
    app: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}}
  name: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}}
  annotations:
    specialresource.openshift.io/wait: "true"
    specialresource.openshift.io/state: "driver-container"
    specialresource.openshift.io/driver-container-vendor: simple-kmod
    specialresource.openshift.io/kernel-affine: "true"
    specialresource.openshift.io/from-configmap: "true"
spec:
  updateStrategy:
    type: OnDelete
  selector:
    matchLabels:
      app: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}}
  template:
    metadata:
      labels:
        app: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}}
    spec:
      priorityClassName: system-node-critical
      serviceAccount: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}}
      serviceAccountName: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}}
      containers:
      - image: image-registry.openshift-image-registry.svc:5000/{{.Values.specialresource.spec.namespace}}/{{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}}:v{{.Values.kernelFullVersion}}
        name: {{.Values.specialresource.metadata.name}}-{{.Values.groupName.driverContainer}}
        imagePullPolicy: Always
        command: ["/sbin/init"]
        lifecycle:
          preStop:
            exec:
              command: ["/bin/sh", "-c", "systemctl stop kmods-via-containers@{{.Values.specialresource.metadata.name}}"]
        securityContext:
          privileged: true
      nodeSelector:
        node-role.kubernetes.io/worker: ""
        feature.node.kubernetes.io/kernel-version.full: "{{.Values.KernelFullVersion}}"

    4. Change into the chart/simple-kmod-0.0.1 directory: 

      $ cd ..

    5. Save the following YAML for the chart as Chart.yaml in the chart/simple-kmod-0.0.1 directory: 

      apiVersion: v2
name: simple-kmod
description: Simple kmod will deploy a simple kmod driver-container
icon: https://avatars.githubusercontent.com/u/55542927
type: application
version: 0.0.1
appVersion: 1.0.0

  2. From the chart directory, create the chart using the helm package command: 

    $ helm package simple-kmod-0.0.1/

    Example output

    Successfully packaged chart and saved it to: /data/<username>/git/<github_username>/special-resource-operator/yaml-for-docs/chart/simple-kmod-0.0.1/simple-kmod-0.0.1.tgz

  3. Create a config map to store the chart files:

    1. Create a directory for the config map files: 

      $ mkdir cm

    2. Copy the Helm chart into the cm directory: 

      $ cp simple-kmod-0.0.1.tgz cm/simple-kmod-0.0.1.tgz

    3. Create an index file specifying the Helm repo that contains the Helm chart: 

      $ helm repo index cm --url=cm://simple-kmod/simple-kmod-chart

    4. Create a namespace for the objects defined in the Helm chart: 

      $ oc create namespace simple-kmod

    5. Create the config map object: 

      $ oc create cm simple-kmod-chart --from-file=cm/index.yaml --from-file=cm/simple-kmod-0.0.1.tgz -n simple-kmod

  4. Use the following SpecialResource manifest to deploy the simple-kmod object using the Helm chart that you created in the config map. Save this YAML as simple-kmod-configmap.yaml: 

    apiVersion: sro.openshift.io/v1beta1
kind: SpecialResource
metadata:
  name: simple-kmod
spec:
  #debug: true 1
  namespace: simple-kmod
  chart:
    name: simple-kmod
    version: 0.0.1
    repository:
      name: example
      url: cm://simple-kmod/simple-kmod-chart 2
  set:
    kind: Values
    apiVersion: sro.openshift.io/v1beta1
    kmodNames: ["simple-kmod", "simple-procfs-kmod"]
    buildArgs:
    - name: "KMODVER"
      value: "SRO"
  driverContainer:
    source:
      git:
        ref: "master"
        uri: "https://github.com/openshift-psap/kvc-simple-kmod.git"
    1
    Optional: Uncomment the #debug: true line to have the YAML files in the chart printed in full in the Operator logs and to verify that the logs are created and templated properly.
    2
    The spec.chart.repository.url field tells the SRO to look for the chart in a config map.

  5. From a command line, create the SpecialResource file: 

    $ oc create -f simple-kmod-configmap.yaml
Note

To remove the simple-kmod kernel module from the node, delete the simple-kmod SpecialResource API object using the oc delete command. The kernel module is unloaded when the driver container pod is deleted.

Verification

The simple-kmod resources are deployed in the simple-kmod namespace as specified in the object manifest. After a short time, the build pod for the simple-kmod driver container starts running. The build completes after a few minutes, and then the driver container pods start running.

  1. Use oc get pods command to display the status of the build pods: 

    $ oc get pods -n simple-kmod

    Example output

    NAME                                                  READY   STATUS      RESTARTS   AGE
simple-kmod-driver-build-12813789169ac0ee-1-build     0/1     Completed   0          7m12s
simple-kmod-driver-container-12813789169ac0ee-mjsnh   1/1     Running     0          8m2s
simple-kmod-driver-container-12813789169ac0ee-qtkff   1/1     Running     0          8m2s

  2. Use the oc logs command, along with the build pod name obtained from the oc get pods command above, to display the logs of the simple-kmod driver container image build: 

    $ oc logs pod/simple-kmod-driver-build-12813789169ac0ee-1-build -n simple-kmod

  3. To verify that the simple-kmod kernel modules are loaded, execute the lsmod command in one of the driver container pods that was returned from the oc get pods command above: 

    $ oc exec -n simple-kmod -it pod/simple-kmod-driver-container-12813789169ac0ee-mjsnh -- lsmod | grep simple

    Example output

    simple_procfs_kmod     16384  0
simple_kmod            16384  0

Tip

The sro_kind_completed_info SRO Prometheus metric provides information about the status of the different objects being deployed, which can be useful to troubleshoot SRO CR installations. The SRO also provides other types of metrics that you can use to watch the health of your environment.

3.3.2. Building and running the simple-kmod SpecialResource for a hub-and-spoke topology

You can use the Special Resource Operator (SRO) on a hub-and-spoke deployment in which Red Hat Advanced Cluster Management (RHACM) connects a hub cluster to one or more managed clusters.

This example procedure shows how the SRO builds driver containers in the hub. The SRO watches hub cluster resources to identify OpenShift Container Platform versions for the helm charts that it uses to create resources which it delivers to spokes.

Prerequisites

  • You have a running OpenShift Container Platform cluster.
  • You installed the OpenShift CLI (oc).
  • You are logged into the OpenShift CLI as a user with cluster-admin privileges.
  • You installed the SRO.
  • You installed the Helm CLI (helm).
  • You installed Red Hat Advanced Cluster Management (RHACM).
  • You configured a container registry.

Procedure

  1. Create a templates directory by running the following command: 

    $ mkdir -p charts/acm-simple-kmod-0.0.1/templates

  2. Change to the templates directory by running the following command: 

    $ cd charts/acm-simple-kmod-0.0.1/templates

  3. Create templates files for the BuildConfig, Policy, and PlacementRule resources.

    1. Save this YAML template for the image stream and build config in the templates directory as 0001-buildconfig.yaml. 

      apiVersion: build.openshift.io/v1
kind: BuildConfig
metadata:
    labels:
        app: {{ printf "%s-%s" .Values.specialResourceModule.metadata.name .Values.kernelFullVersion | replace "." "-" | replace "_" "-" | trunc 63 }}
    name: {{ printf "%s-%s" .Values.specialResourceModule.metadata.name .Values.kernelFullVersion | replace "." "-" | replace "_" "-" | trunc 63 }}
    annotations:
specialresource.openshift.io/wait: "true"
spec:
    nodeSelector:
        node-role.kubernetes.io/worker: ""
    runPolicy: "Serial"
    triggers:
        - type: "ConfigChange"
        - type: "ImageChange"
    source:
    dockerfile: |
        FROM {{ .Values.driverToolkitImage  }} as builder
        WORKDIR /build/
        RUN git clone -b {{.Values.specialResourceModule.spec.set.git.ref}} {{.Values.specialResourceModule.spec.set.git.uri}}
        WORKDIR /build/simple-kmod
        RUN make all install KVER={{ .Values.kernelFullVersion }}
        FROM registry.redhat.io/ubi8/ubi-minimal
        RUN microdnf -y install kmod
        COPY --from=builder /etc/driver-toolkit-release.json /etc/
        COPY --from=builder /lib/modules/{{ .Values.kernelFullVersion }}/* /lib/modules/{{ .Values.kernelFullVersion }}/
    strategy:
        dockerStrategy:
            dockerfilePath: Dockerfile.SRO
            buildArgs:
                - name: "IMAGE"
                  value: {{ .Values.driverToolkitImage  }}
                {{- range $arg := .Values.buildArgs }}
                - name: {{ $arg.name }}
                  value: {{ $arg.value }}
                {{- end }}
                - name: KVER
                  value: {{ .Values.kernelFullVersion }}
    output:
        to:
            kind: DockerImage
            name: {{.Values.registry}}/{{.Values.specialResourceModule.metadata.name}}-{{.Values.groupName.driverContainer}}:{{.Values.kernelFullVersion}}

    2. Save this YAML template for the ACM policy in the templates directory as 0002-policy.yaml. 

      apiVersion: policy.open-cluster-management.io/v1
kind: Policy
metadata:
    name: policy-{{.Values.specialResourceModule.metadata.name}}-ds
    annotations:
        policy.open-cluster-management.io/categories: CM Configuration Management
        policy.open-cluster-management.io/controls: CM-2 Baseline Configuration
        policy.open-cluster-management.io/standards: NIST-CSF
spec:
    remediationAction: enforce
    disabled: false
    policy-templates:
        - objectDefinition:
            apiVersion: policy.open-cluster-management.io/v1
            kind: ConfigurationPolicy
            metadata:
                name: config-{{.Values.specialResourceModule.metadata.name}}-ds
            spec:
                remediationAction: enforce
                severity: low
                namespaceselector:
                    exclude:
                        - kube-*
                    include:
                        - '*'
                object-templates:
                    - complianceType: musthave
                      objectDefinition:
                        apiVersion: v1
                        kind: Namespace
                        metadata:
                            name: {{.Values.specialResourceModule.spec.namespace}}
                    - complianceType: mustonlyhave
                      objectDefinition:
                        apiVersion: v1
                        kind: ServiceAccount
                        metadata:
                            name: {{.Values.specialResourceModule.metadata.name}}
                            namespace: {{.Values.specialResourceModule.spec.namespace}}
                    - complianceType: mustonlyhave
                      objectDefinition:
                        apiVersion: rbac.authorization.k8s.io/v1
                        kind: Role
                        metadata:
                            name: {{.Values.specialResourceModule.metadata.name}}
                            namespace: {{.Values.specialResourceModule.spec.namespace}}
                        rules:
                        - apiGroups:
                            - security.openshift.io
                          resources:
                            - securitycontextconstraints
                          verbs:
                            - use
                          resourceNames:
                            - privileged
                    - complianceType: mustonlyhave
                      objectDefinition:
                        apiVersion: rbac.authorization.k8s.io/v1
                        kind: RoleBinding
                        metadata:
                            name: {{.Values.specialResourceModule.metadata.name}}
                            namespace: {{.Values.specialResourceModule.spec.namespace}}
                        roleRef:
                            apiGroup: rbac.authorization.k8s.io
                            kind: Role
                            name: {{.Values.specialResourceModule.metadata.name}}
                        subjects:
                        - kind: ServiceAccount
                          name: {{.Values.specialResourceModule.metadata.name}}
                          namespace: {{.Values.specialResourceModule.spec.namespace}}
                    - complianceType: musthave
                      objectDefinition:
                        apiVersion: apps/v1
                        kind: DaemonSet
                        metadata:
                            labels:
                                app: {{ printf "%s-%s" .Values.specialResourceModule.metadata.name .Values.kernelFullVersion | replace "." "-" | replace "_" "-" | trunc 63 }}
                            name: {{ printf "%s-%s" .Values.specialResourceModule.metadata.name .Values.kernelFullVersion | replace "." "-" | replace "_" "-" | trunc 63 }}
                            namespace: {{.Values.specialResourceModule.spec.namespace}}
                        spec:
                            updateStrategy:
                                type: OnDelete
                            selector:
                                matchLabels:
                                    app: {{ printf "%s-%s" .Values.specialResourceModule.metadata.name .Values.kernelFullVersion | replace "." "-" | replace "_" "-" | trunc 63 }}
                            template:
                                metadata:
                                    labels:
                                        app: {{ printf "%s-%s" .Values.specialResourceModule.metadata.name .Values.kernelFullVersion | replace "." "-" | replace "_" "-" | trunc 63 }}
                                spec:
                                    priorityClassName: system-node-critical
                                    serviceAccount: {{.Values.specialResourceModule.metadata.name}}
                                    serviceAccountName: {{.Values.specialResourceModule.metadata.name}}
                                    containers:
                                    - image: {{.Values.registry}}/{{.Values.specialResourceModule.metadata.name}}-{{.Values.groupName.driverContainer}}:{{.Values.kernelFullVersion}}
                                      name: {{.Values.specialResourceModule.metadata.name}}
                                      imagePullPolicy: Always
                                      command: [sleep, infinity]
                                      lifecycle:
                                        preStop:
                                            exec:
                                                command: ["modprobe", "-r", "-a" , "simple-kmod", "simple-procfs-kmod"]
                                      securityContext:
                                        privileged: true

    3. Save this YAML template for the placement of policies in the templates directory as 0003-policy.yaml. 

      apiVersion: apps.open-cluster-management.io/v1
kind: PlacementRule
metadata:
    name: {{.Values.specialResourceModule.metadata.name}}-placement
spec:
    clusterConditions:
    - status: "True"
      type: ManagedClusterConditionAvailable
    clusterSelector:
      matchExpressions:
      - key: name
        operator: NotIn
        values:
        - local-cluster
---
apiVersion: policy.open-cluster-management.io/v1
kind: PlacementBinding
metadata:
    name: {{.Values.specialResourceModule.metadata.name}}-binding
placementRef:
    apiGroup: apps.open-cluster-management.io
    kind: PlacementRule
    name: {{.Values.specialResourceModule.metadata.name}}-placement
subjects:
    - apiGroup: policy.open-cluster-management.io
      kind: Policy
      name: policy-{{.Values.specialResourceModule.metadata.name}}-ds

    4. Change into the charts/acm-simple-kmod-0.0.1 directory by running the following command: 

      cd ..

    5. Save the following YAML template for the chart as Chart.yaml in the charts/acm-simple-kmod-0.0.1 directory: 

      apiVersion: v2
name: acm-simple-kmod
description: Build ACM enabled simple-kmod driver with SpecialResourceOperator
icon: https://avatars.githubusercontent.com/u/55542927
type: application
version: 0.0.1
appVersion: 1.6.4

  4. From the charts directory, create the chart using the command: 

    $ helm package acm-simple-kmod-0.0.1/

    Example output

    Successfully packaged chart and saved it to: <directory>/charts/acm-simple-kmod-0.0.1.tgz

  5. Create a config map to store the chart files.

    1. Create a directory for the config map files by running the following command: 

      $ mkdir cm

    2. Copy the Helm chart into the cm directory by running the following command: 

      $ cp acm-simple-kmod-0.0.1.tgz cm/acm-simple-kmod-0.0.1.tgz

    3. Create an index file specifying the Helm repository that contains the Helm chart by running the following command: 

      $ helm repo index cm --url=cm://acm-simple-kmod/acm-simple-kmod-chart

    4. Create a namespace for the objects defined in the Helm chart by running the following command: 

      $ oc create namespace acm-simple-kmod

    5. Create the config map object by running the following command: 

      $ oc create cm acm-simple-kmod-chart --from-file=cm/index.yaml --from-file=cm/acm-simple-kmod-0.0.1.tgz -n acm-simple-kmod

  6. Use the following SpecialResourceModule manifest to deploy the simple-kmod object using the Helm chart that you created in the config map. Save this YAML file as acm-simple-kmod.yaml: 

    apiVersion: sro.openshift.io/v1beta1
kind: SpecialResourceModule
metadata:
    name: acm-simple-kmod
spec:
    namespace: acm-simple-kmod
    chart:
        name: acm-simple-kmod
        version: 0.0.1
        repository:
            name: acm-simple-kmod
            url: cm://acm-simple-kmod/acm-simple-kmod-chart
    set:
        kind: Values
        apiVersion: sro.openshift.io/v1beta1
        buildArgs:
            - name: "KMODVER"
              value: "SRO"
        registry: <your_registry>  1
        git:
            ref: master
            uri: https://github.com/openshift-psap/kvc-simple-kmod.git
    watch:
            - path: "$.metadata.labels.openshiftVersion"
              apiVersion: cluster.open-cluster-management.io/v1
              kind: ManagedCluster
              name: spoke1
    1
    Specify the URL for a registry that you have configured.

  7. Create the special resource module by running the following command: 

    $ oc apply -f charts/examples/acm-simple-kmod.yaml

Verification

  1. Check the status of the build pods by running the following command: 

    $ KUBECONFIG=~/hub/auth/kubeconfig oc get pod -n acm-simple-kmod

    Example output

    NAME                                                   READY   STATUS      RESTARTS   AGE
acm-simple-kmod-4-18-0-305-34-2-el8-4-x86-64-1-build   0/1     Completed   0          42m

  2. Check that the policies have been created by running the following command: 

    $ KUBECONFIG=~/hub/auth/kubeconfig oc get placementrules,placementbindings,policies -n acm-simple-kmod

    Example output

    NAME                                                                      AGE   REPLICAS
placementrule.apps.open-cluster-management.io/acm-simple-kmod-placement   40m

NAME                                                                         AGE
placementbinding.policy.open-cluster-management.io/acm-simple-kmod-binding   40m

NAME                                                                 REMEDIATION ACTION   COMPLIANCE STATE   AGE
policy.policy.open-cluster-management.io/policy-acm-simple-kmod-ds   enforce              Compliant          40m

  3. Check that the resources have been reconciled by running the following command: 

    $ KUBECONFIG=~/hub/auth/kubeconfig oc get specialresourcemodule acm-simple-kmod -o json | jq -r '.status'

    Example output

    {
  "versions": {
    "quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:6a3330ef5a178435721ff4efdde762261a9c55212e9b4534385e04037693fbe4": {
      "complete": true
    }
  }
}

  4. Check that the resources are running in the spoke by running the following command: 

    $ KUBECONFIG=~/spoke1/kubeconfig oc get ds,pod -n acm-simple-kmod

    Example output

    AME                                                          DESIRED   CURRENT   READY   UP-TO-DATE   AVAILABLE   NODE SELECTOR   AGE
daemonset.apps/acm-simple-kmod-4-18-0-305-45-1-el8-4-x86-64   3         3         3       3            3           <none>          26m

NAME                                                     READY   STATUS    RESTARTS   AGE
pod/acm-simple-kmod-4-18-0-305-45-1-el8-4-x86-64-brw78   1/1     Running   0          26m
pod/acm-simple-kmod-4-18-0-305-45-1-el8-4-x86-64-fqh5h   1/1     Running   0          26m
pod/acm-simple-kmod-4-18-0-305-45-1-el8-4-x86-64-m9sfd   1/1     Running   0          26m

3.4. Prometheus Special Resource Operator metrics

The Special Resource Operator (SRO) exposes the following Prometheus metrics through the metrics service:

Metric NameDescription

sro_used_nodes

Returns the nodes that are running pods created by a SRO custom resource (CR). This metric is available for DaemonSet and Deployment objects only.

sro_kind_completed_info

Represents whether a kind of an object defined by the Helm Charts in a SRO CR has been successfully uploaded in the cluster (value 1) or not (value 0). Examples of objects are DaemonSet, Deployment or BuildConfig.

sro_states_completed_info

Represents whether the SRO has finished processing a CR successfully (value 1) or the SRO has not processed the CR yet (value 0).

sro_managed_resources_total

Returns the number of SRO CRs in the cluster, regardless of their state.

3.5. Additional resources

Chapter 4. Node Feature Discovery Operator

Learn about the Node Feature Discovery (NFD) Operator and how you can use it to expose node-level information by orchestrating Node Feature Discovery, a Kubernetes add-on for detecting hardware features and system configuration.

4.1. About the Node Feature Discovery Operator

The Node Feature Discovery Operator (NFD) manages the detection of hardware features and configuration in an OpenShift Container Platform cluster by labeling the nodes with hardware-specific information. NFD labels the host with node-specific attributes, such as PCI cards, kernel, operating system version, and so on.

The NFD Operator can be found on the Operator Hub by searching for “Node Feature Discovery”.

4.2. Installing the Node Feature Discovery Operator

The Node Feature Discovery (NFD) Operator orchestrates all resources needed to run the NFD daemon set. As a cluster administrator, you can install the NFD Operator by using the OpenShift Container Platform CLI or the web console.

4.2.1. Installing the NFD Operator using the CLI

As a cluster administrator, you can install the NFD Operator using the CLI.

Prerequisites

  • An OpenShift Container Platform cluster
  • Install the OpenShift CLI (oc).
  • Log in as a user with cluster-admin privileges.

Procedure

  1. Create a namespace for the NFD Operator.

    1. Create the following Namespace custom resource (CR) that defines the openshift-nfd namespace, and then save the YAML in the nfd-namespace.yaml file: 

      apiVersion: v1
kind: Namespace
metadata:
  name: openshift-nfd

    2. Create the namespace by running the following command: 

      $ oc create -f nfd-namespace.yaml

  2. Install the NFD Operator in the namespace you created in the previous step by creating the following objects:

    1. Create the following OperatorGroup CR and save the YAML in the nfd-operatorgroup.yaml file: 

      apiVersion: operators.coreos.com/v1
kind: OperatorGroup
metadata:
  generateName: openshift-nfd-
  name: openshift-nfd
  namespace: openshift-nfd
spec:
  targetNamespaces:
  - openshift-nfd

    2. Create the OperatorGroup CR by running the following command: 

      $ oc create -f nfd-operatorgroup.yaml

    3. Create the following Subscription CR and save the YAML in the nfd-sub.yaml file:

      Example Subscription

      apiVersion: operators.coreos.com/v1alpha1
kind: Subscription
metadata:
  name: nfd
  namespace: openshift-nfd
spec:
  channel: "stable"
  installPlanApproval: Automatic
  name: nfd
  source: redhat-operators
  sourceNamespace: openshift-marketplace

    4. Create the subscription object by running the following command: 

      $ oc create -f nfd-sub.yaml

    5. Change to the openshift-nfd project: 

      $ oc project openshift-nfd

Verification

  • To verify that the Operator deployment is successful, run: 

    $ oc get pods

    Example output

    NAME                                      READY   STATUS    RESTARTS   AGE
nfd-controller-manager-7f86ccfb58-vgr4x   2/2     Running   0          10m

    A successful deployment shows a Running status.

4.2.2. Installing the NFD Operator using the web console

As a cluster administrator, you can install the NFD Operator using the web console.

Procedure

  1. In the OpenShift Container Platform web console, click Operators → OperatorHub.
  2. Choose Node Feature Discovery from the list of available Operators, and then click Install.
  3. On the Install Operator page, select A specific namespace on the cluster, and then click Install. You do not need to create a namespace because it is created for you.

Verification

To verify that the NFD Operator installed successfully:

  1. Navigate to the Operators → Installed Operators page.

  2. Ensure that Node Feature Discovery is listed in the openshift-nfd project with a Status of InstallSucceeded.

    Note

    During installation an Operator might display a Failed status. If the installation later succeeds with an InstallSucceeded message, you can ignore the Failed message.

Troubleshooting

If the Operator does not appear as installed, troubleshoot further:

  1. Navigate to the Operators → Installed Operators page and inspect the Operator Subscriptions and Install Plans tabs for any failure or errors under Status.
  2. Navigate to the Workloads → Pods page and check the logs for pods in the openshift-nfd project.

4.3. Using the Node Feature Discovery Operator

The Node Feature Discovery (NFD) Operator orchestrates all resources needed to run the Node-Feature-Discovery daemon set by watching for a NodeFeatureDiscovery CR. Based on the NodeFeatureDiscovery CR, the Operator will create the operand (NFD) components in the desired namespace. You can edit the CR to choose another namespace, image, imagePullPolicy, and nfd-worker-conf, among other options.

As a cluster administrator, you can create a NodeFeatureDiscovery instance using the OpenShift Container Platform CLI or the web console.

4.3.1. Create a NodeFeatureDiscovery instance using the CLI

As a cluster administrator, you can create a NodeFeatureDiscovery CR instance using the CLI.

Prerequisites

  • An OpenShift Container Platform cluster
  • Install the OpenShift CLI (oc).
  • Log in as a user with cluster-admin privileges.
  • Install the NFD Operator.

Procedure

  1. Create the following NodeFeatureDiscovery Custom Resource (CR), and then save the YAML in the NodeFeatureDiscovery.yaml file: 

    apiVersion: nfd.openshift.io/v1
kind: NodeFeatureDiscovery
metadata:
  name: nfd-instance
  namespace: openshift-nfd
spec:
  instance: "" # instance is empty by default
  topologyupdater: false # False by default
  operand:
    image: registry.redhat.io/openshift4/ose-node-feature-discovery:v4.11
    imagePullPolicy: Always
  workerConfig:
    configData: |
      core:
      #  labelWhiteList:
      #  noPublish: false
        sleepInterval: 60s
      #  sources: [all]
      #  klog:
      #    addDirHeader: false
      #    alsologtostderr: false
      #    logBacktraceAt:
      #    logtostderr: true
      #    skipHeaders: false
      #    stderrthreshold: 2
      #    v: 0
      #    vmodule:
      ##   NOTE: the following options are not dynamically run-time configurable
      ##         and require a nfd-worker restart to take effect after being changed
      #    logDir:
      #    logFile:
      #    logFileMaxSize: 1800
      #    skipLogHeaders: false
      sources:
        cpu:
          cpuid:
      #     NOTE: whitelist has priority over blacklist
            attributeBlacklist:
              - "BMI1"
              - "BMI2"
              - "CLMUL"
              - "CMOV"
              - "CX16"
              - "ERMS"
              - "F16C"
              - "HTT"
              - "LZCNT"
              - "MMX"
              - "MMXEXT"
              - "NX"
              - "POPCNT"
              - "RDRAND"
              - "RDSEED"
              - "RDTSCP"
              - "SGX"
              - "SSE"
              - "SSE2"
              - "SSE3"
              - "SSE4.1"
              - "SSE4.2"
              - "SSSE3"
            attributeWhitelist:
        kernel:
          kconfigFile: "/path/to/kconfig"
          configOpts:
            - "NO_HZ"
            - "X86"
            - "DMI"
        pci:
          deviceClassWhitelist:
            - "0200"
            - "03"
            - "12"
          deviceLabelFields:
            - "class"
  customConfig:
    configData: |
          - name: "more.kernel.features"
            matchOn:
            - loadedKMod: ["example_kmod3"]

For more details on how to customize NFD workers, refer to the Configuration file reference of nfd-worker.

  1. Create the NodeFeatureDiscovery CR instance by running the following command: 

    $ oc create -f NodeFeatureDiscovery.yaml

Verification

  • To verify that the instance is created, run: 

    $ oc get pods

    Example output

    NAME                                      READY   STATUS    RESTARTS   AGE
nfd-controller-manager-7f86ccfb58-vgr4x   2/2     Running   0          11m
nfd-master-hcn64                          1/1     Running   0          60s
nfd-master-lnnxx                          1/1     Running   0          60s
nfd-master-mp6hr                          1/1     Running   0          60s
nfd-worker-vgcz9                          1/1     Running   0          60s
nfd-worker-xqbws                          1/1     Running   0          60s

    A successful deployment shows a Running status.

4.3.2. Create a NodeFeatureDiscovery CR using the web console

Procedure

  1. Navigate to the Operators → Installed Operators page.
  2. Find Node Feature Discovery and see a box under Provided APIs.
  3. Click Create instance.
  4. Edit the values of the NodeFeatureDiscovery CR.
  5. Click Create.

4.4. Configuring the Node Feature Discovery Operator

4.4.1. core

The core section contains common configuration settings that are not specific to any particular feature source.

core.sleepInterval

core.sleepInterval specifies the interval between consecutive passes of feature detection or re-detection, and thus also the interval between node re-labeling. A non-positive value implies infinite sleep interval; no re-detection or re-labeling is done.

This value is overridden by the deprecated --sleep-interval command line flag, if specified.

Example usage

core:
  sleepInterval: 60s 1

The default value is 60s.

core.sources

core.sources specifies the list of enabled feature sources. A special value all enables all feature sources.

This value is overridden by the deprecated --sources command line flag, if specified.

Default: [all]

Example usage

core:
  sources:
    - system
    - custom

core.labelWhiteList

core.labelWhiteList specifies a regular expression for filtering feature labels based on the label name. Non-matching labels are not published.

The regular expression is only matched against the basename part of the label, the part of the name after '/'. The label prefix, or namespace, is omitted.

This value is overridden by the deprecated --label-whitelist command line flag, if specified.

Default: null

Example usage

core:
  labelWhiteList: '^cpu-cpuid'

core.noPublish

Setting core.noPublish to true disables all communication with the nfd-master. It is effectively a dry run flag; nfd-worker runs feature detection normally, but no labeling requests are sent to nfd-master.

This value is overridden by the --no-publish command line flag, if specified.

Example:

Example usage

core:
  noPublish: true 1

The default value is false.

core.klog

The following options specify the logger configuration, most of which can be dynamically adjusted at run-time.

The logger options can also be specified using command line flags, which take precedence over any corresponding config file options.

core.klog.addDirHeader

If set to true, core.klog.addDirHeader adds the file directory to the header of the log messages.

Default: false

Run-time configurable: yes

core.klog.alsologtostderr

Log to standard error as well as files.

Default: false

Run-time configurable: yes

core.klog.logBacktraceAt

When logging hits line file:N, emit a stack trace.

Default: empty

Run-time configurable: yes

core.klog.logDir

If non-empty, write log files in this directory.

Default: empty

Run-time configurable: no

core.klog.logFile

If not empty, use this log file.

Default: empty

Run-time configurable: no

core.klog.logFileMaxSize

core.klog.logFileMaxSize defines the maximum size a log file can grow to. Unit is megabytes. If the value is 0, the maximum file size is unlimited.

Default: 1800

Run-time configurable: no

core.klog.logtostderr

Log to standard error instead of files

Default: true

Run-time configurable: yes

core.klog.skipHeaders

If core.klog.skipHeaders is set to true, avoid header prefixes in the log messages.

Default: false

Run-time configurable: yes

core.klog.skipLogHeaders

If core.klog.skipLogHeaders is set to true, avoid headers when opening log files.

Default: false

Run-time configurable: no

core.klog.stderrthreshold

Logs at or above this threshold go to stderr.

Default: 2

Run-time configurable: yes

core.klog.v

core.klog.v is the number for the log level verbosity.

Default: 0

Run-time configurable: yes

core.klog.vmodule

core.klog.vmodule is a comma-separated list of pattern=N settings for file-filtered logging.

Default: empty

Run-time configurable: yes

4.4.2. sources

The sources section contains feature source specific configuration parameters.

sources.cpu.cpuid.attributeBlacklist

Prevent publishing cpuid features listed in this option.

This value is overridden by sources.cpu.cpuid.attributeWhitelist, if specified.

Default: [BMI1, BMI2, CLMUL, CMOV, CX16, ERMS, F16C, HTT, LZCNT, MMX, MMXEXT, NX, POPCNT, RDRAND, RDSEED, RDTSCP, SGX, SGXLC, SSE, SSE2, SSE3, SSE4.1, SSE4.2, SSSE3]

Example usage

sources:
  cpu:
    cpuid:
      attributeBlacklist: [MMX, MMXEXT]

sources.cpu.cpuid.attributeWhitelist

Only publish the cpuid features listed in this option.

sources.cpu.cpuid.attributeWhitelist takes precedence over sources.cpu.cpuid.attributeBlacklist.

Default: empty

Example usage

sources:
  cpu:
    cpuid:
      attributeWhitelist: [AVX512BW, AVX512CD, AVX512DQ, AVX512F, AVX512VL]

sources.kernel.kconfigFile

sources.kernel.kconfigFile is the path of the kernel config file. If empty, NFD runs a search in the well-known standard locations.

Default: empty

Example usage

sources:
  kernel:
    kconfigFile: "/path/to/kconfig"

sources.kernel.configOpts

sources.kernel.configOpts represents kernel configuration options to publish as feature labels.

Default: [NO_HZ, NO_HZ_IDLE, NO_HZ_FULL, PREEMPT]

Example usage

sources:
  kernel:
    configOpts: [NO_HZ, X86, DMI]

sources.pci.deviceClassWhitelist

sources.pci.deviceClassWhitelist is a list of PCI device class IDs for which to publish a label. It can be specified as a main class only (for example, 03) or full class-subclass combination (for example 0300). The former implies that all subclasses are accepted. The format of the labels can be further configured with deviceLabelFields.

Default: ["03", "0b40", "12"]

Example usage

sources:
  pci:
    deviceClassWhitelist: ["0200", "03"]

sources.pci.deviceLabelFields

sources.pci.deviceLabelFields is the set of PCI ID fields to use when constructing the name of the feature label. Valid fields are class, vendor, device, subsystem_vendor and subsystem_device.

Default: [class, vendor]

Example usage

sources:
  pci:
    deviceLabelFields: [class, vendor, device]

With the example config above, NFD would publish labels such as feature.node.kubernetes.io/pci-<class-id>_<vendor-id>_<device-id>.present=true

sources.usb.deviceClassWhitelist

sources.usb.deviceClassWhitelist is a list of USB device class IDs for which to publish a feature label. The format of the labels can be further configured with deviceLabelFields.

Default: ["0e", "ef", "fe", "ff"]

Example usage

sources:
  usb:
    deviceClassWhitelist: ["ef", "ff"]

sources.usb.deviceLabelFields

sources.usb.deviceLabelFields is the set of USB ID fields from which to compose the name of the feature label. Valid fields are class, vendor, and device.

Default: [class, vendor, device]

Example usage

sources:
  pci:
    deviceLabelFields: [class, vendor]

With the example config above, NFD would publish labels like: feature.node.kubernetes.io/usb-<class-id>_<vendor-id>.present=true.

sources.custom

sources.custom is the list of rules to process in the custom feature source to create user-specific labels.

Default: empty

Example usage

source:
  custom:
  - name: "my.custom.feature"
    matchOn:
    - loadedKMod: ["e1000e"]
    - pciId:
        class: ["0200"]
        vendor: ["8086"]

4.5. Using the NFD Topology Updater

The Node Feature Discovery (NFD) Topology Updater is a daemon responsible for examining allocated resources on a worker node. It accounts for resources that are available to be allocated to new pod on a per-zone basis, where a zone can be a Non-Uniform Memory Access (NUMA) node. The NFD Topology Updater communicates the information to nfd-master, which creates a NodeResourceTopology custom resource (CR) corresponding to all of the worker nodes in the cluster. One instance of the NFD Topology Updater runs on each node of the cluster.

To enable the Topology Updater workers in NFD, set the topologyupdater variable to true in the NodeFeatureDiscovery CR, as described in the section Using the Node Feature Discovery Operator.

4.5.1. NodeResourceTopology CR

When run with NFD Topology Updater, NFD creates custom resource instances corresponding to the node resource hardware topology, such as: 

apiVersion: topology.node.k8s.io/v1alpha1
kind: NodeResourceTopology
metadata:
  name: node1
topologyPolicies: ["SingleNUMANodeContainerLevel"]
zones:
  - name: node-0
    type: Node
    resources:
      - name: cpu
        capacity: 20
        allocatable: 16
        available: 10
      - name: vendor/nic1
        capacity: 3
        allocatable: 3
        available: 3
  - name: node-1
    type: Node
    resources:
      - name: cpu
        capacity: 30
        allocatable: 30
        available: 15
      - name: vendor/nic2
        capacity: 6
        allocatable: 6
        available: 6
  - name: node-2
    type: Node
    resources:
      - name: cpu
        capacity: 30
        allocatable: 30
        available: 15
      - name: vendor/nic1
        capacity: 3
        allocatable: 3
        available: 3

4.5.2. NFD Topology Updater command line flags

To view available command line flags, run the nfd-topology-updater -help command. For example, in a podman container, run the following command: 

$ podman run gcr.io/k8s-staging-nfd/node-feature-discovery:master nfd-topology-updater -help
-ca-file

The -ca-file flag is one of the three flags, together with the -cert-file and `-key-file`flags, that controls the mutual TLS authentication on the NFD Topology Updater. This flag specifies the TLS root certificate that is used for verifying the authenticity of nfd-master.

Default: empty

Important

The -ca-file flag must be specified together with the -cert-file and -key-file flags.

Example

$ nfd-topology-updater -ca-file=/opt/nfd/ca.crt -cert-file=/opt/nfd/updater.crt -key-file=/opt/nfd/updater.key

-cert-file

The -cert-file flag is one of the three flags, together with the -ca-file and -key-file flags, that controls mutual TLS authentication on the NFD Topology Updater. This flag specifies the TLS certificate presented for authenticating outgoing requests.

Default: empty

Important

The -cert-file flag must be specified together with the -ca-file and -key-file flags.

Example

$ nfd-topology-updater -cert-file=/opt/nfd/updater.crt -key-file=/opt/nfd/updater.key -ca-file=/opt/nfd/ca.crt

-h, -help

Print usage and exit.

-key-file

The -key-file flag is one of the three flags, together with the -ca-file and -cert-file flags, that controls the mutual TLS authentication on the NFD Topology Updater. This flag specifies the private key corresponding the given certificate file, or -cert-file, that is used for authenticating outgoing requests.

Default: empty

Important

The -key-file flag must be specified together with the -ca-file and -cert-file flags.

Example

$ nfd-topology-updater -key-file=/opt/nfd/updater.key -cert-file=/opt/nfd/updater.crt -ca-file=/opt/nfd/ca.crt

-kubelet-config-file

The -kubelet-config-file specifies the path to the Kubelet’s configuration file.

Default: /host-var/lib/kubelet/config.yaml

Example

$ nfd-topology-updater -kubelet-config-file=/var/lib/kubelet/config.yaml

-no-publish

The -no-publish flag disables all communication with the nfd-master, making it a dry run flag for nfd-topology-updater. NFD Topology Updater runs resource hardware topology detection normally, but no CR requests are sent to nfd-master.

Default: false

Example

$ nfd-topology-updater -no-publish

4.5.2.1. -oneshot

The -oneshot flag causes the NFD Topology Updater to exit after one pass of resource hardware topology detection.

Default: false

Example

$ nfd-topology-updater -oneshot -no-publish

-podresources-socket

The -podresources-socket flag specifies the path to the Unix socket where kubelet exports a gRPC service to enable discovery of in-use CPUs and devices, and to provide metadata for them.

Default: /host-var/liblib/kubelet/pod-resources/kubelet.sock

Example

$ nfd-topology-updater -podresources-socket=/var/lib/kubelet/pod-resources/kubelet.sock

-server

The -server flag specifies the address of the nfd-master endpoint to connect to.

Default: localhost:8080

Example

$ nfd-topology-updater -server=nfd-master.nfd.svc.cluster.local:443

-server-name-override

The -server-name-override flag specifies the common name (CN) which to expect from the nfd-master TLS certificate. This flag is mostly intended for development and debugging purposes.

Default: empty

Example

$ nfd-topology-updater -server-name-override=localhost

-sleep-interval

The -sleep-interval flag specifies the interval between resource hardware topology re-examination and custom resource updates. A non-positive value implies infinite sleep interval and no re-detection is done.

Default: 60s

Example

$ nfd-topology-updater -sleep-interval=1h

-version

Print version and exit.

-watch-namespace

The -watch-namespace flag specifies the namespace to ensure that resource hardware topology examination only happens for the pods running in the specified namespace. Pods that are not running in the specified namespace are not considered during resource accounting. This is particularly useful for testing and debugging purposes. A * value means that all of the pods across all namespaces are considered during the accounting process.

Default: *

Example

$ nfd-topology-updater -watch-namespace=rte

Legal Notice

Copyright © 2024 Red Hat, Inc.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.