Infrastructure nodes are nodes that are labeled to run pieces of the OpenShift Container Platform environment. Currently, the easiest way to manage node reboots is to ensure that there are at least three nodes available to run infrastructure. The scenario below demonstrates a common mistake that can lead to service interruptions for the applications running on OpenShift Container Platform when only two nodes are available.

The same process using three infrastructure nodes does not result in a service disruption. However, due to pod scheduling, the last node that is evacuated and brought back in to rotation is left running zero registries. The other two nodes will run two and one registries respectively. The best solution is to rely on pod anti-affinity. This is an alpha feature in Kubernetes that is available for testing now, but is not yet supported for production workloads.

Pod anti-affinity is slightly different than node anti-affinity. Node anti-affinity can be violated if there are no other suitable locations to deploy a pod. Pod anti-affinity can be set to either required or preferred.

Using the docker-registry pod as an example, the first step in enabling this feature is to set the scheduler.alpha.kubernetes.io/affinity on the pod.

apiVersion: v1
kind: Pod
metadata:
  name: with-pod-antiaffinity
spec:
  affinity:
    podAntiAffinity: 1
      preferredDuringSchedulingIgnoredDuringExecution: 2
      - weight: 100 3
        podAffinityTerm:
          labelSelector:
            matchExpressions:
            - key: docker-registry 4
              operator: In 5
              values:
              - default
          topologyKey: kubernetes.io/hostname

This example assumes the Docker registry pod has a label of docker-registry=default. Pod anti-affinity can use any Kubernetes match expression.

The last required step is to enable the MatchInterPodAffinity scheduler predicate in /etc/origin/master/scheduler.json. With this in place, if only two infrastructure nodes are available and one is rebooted, the Docker registry pod is prevented from running on the other node. oc get pods reports the pod as unready until a suitable node is available. Once a node is available and all pods are back in ready state, the next node can be restarted.

In most cases, a pod running an OpenShift Container Platform router will expose a host port. The PodFitsPorts scheduler predicate ensures that no router pods using the same port can run on the same node, and pod anti-affinity is achieved. If the routers are relying on IP failover for high availability, there is nothing else that is needed. For router pods relying on an external service such as AWS Elastic Load Balancing for high availability, it is that service’s responsibility to react to router pod restarts.

In rare cases, a router pod might not have a host port configured. In those cases, it is important to follow the recommended restart process for infrastructure nodes.

In the /etc/origin/node/node-config.yaml file, two parameters control the maximum number of pods that can be scheduled to a node: pods-per-core and max-pods. When both options are in use, the lower of the two limits the number of pods on a node. Exceeding these values can result in:

pods-per-core sets the number of pods the node can run based on the number of processor cores on the node. For example, if pods-per-core is set to 10 on a node with 4 processor cores, the maximum number of pods allowed on the node will be 40.

kubeletArguments:
  pods-per-core:
    - "10"

max-pods sets the number of pods the node can run to a fixed value, regardless of the properties of the node. Cluster Limits documents maximum supported values for max-pods.

kubeletArguments:
  max-pods:
    - "250"

Using the above example, the default value for pods-per-core is 10 and the default value for max-pods is 250. This means that unless the node has 25 cores or more, by default, pods-per-core will be the limiting factor.

The following process restores healthy data files and starts the etcd cluster as a single node, then adds the rest of the nodes if an etcd cluster is required.

Procedure

# etcdctl2 member list
5ee217d17301: name=master-0.example.com peerURLs=http://*localhost*:2380 clientURLs=https://192.168.55.8:2379 isLeader=true

The restore procedure for v3 data is similar to the restore procedure for the v2 data.

Snapshot integrity may be optionally verified at restore time. If the snapshot is taken with etcdctl snapshot save, it will have an integrity hash that is checked by etcdctl snapshot restore. If the snapshot is copied from the data directory, there is no integrity hash and it will only restore by using --skip-hash-check.

Procedure

Procedure

Procedure

Modify the current etcd cluster

To create the etcd certificates, run the openssl command, replacing the values with those from your environment.

Modify the new etcd host

Modify each OpenShift Container Platform master

Procedure

The following steps assume that a new pvc has been created.

Procedure

Procedure

Procedure

Modify the current etcd cluster

To create the etcd certificates, run the openssl command, replacing the values with those from your environment.

Modify the new etcd host

Modify each OpenShift Container Platform master

The API server automatically provisions projects based on the template that is identified by the projectRequestTemplate parameter of the master-config.yaml file. If the parameter is not defined, the API server creates a default template that creates a project with the requested name, and assigns the requesting user to the "admin" role for that project.

To create your own custom project template:

When a project request is submitted, the API substitutes the following parameters into the template:

Access to the API is granted to developers with the self-provisioner role and the self-provisioners cluster role binding. This role is available to all authenticated developers by default.

You can prevent an authenticated user group from self-provisioning new projects.

As a cluster administrator, you can set the cluster-wide default node selector to restrict pod placement to specific nodes.

Edit the master configuration file at /etc/origin/master/master-config.yaml and add a value for a default node selector. This is applied to the pods created in all projects without a specified nodeSelector value:

...
projectConfig:
  defaultNodeSelector: "type=user-node,region=east"
...

Restart the OpenShift service for the changes to take effect:

# systemctl restart atomic-openshift-master-api atomic-openshift-master-controllers

To create an individual project with a node selector, use the --node-selector option when creating a project. For example, if you have an OpenShift Container Platform topology with multiple regions, you can use a node selector to restrict specific OpenShift Container Platform projects to only deploy pods onto nodes in a specific region.

The following creates a new project named myproject and dictates that pods be deployed onto nodes labeled user-node and east:

$ oc adm new-project myproject \
    --node-selector='type=user-node,region=east'

Once this command is run, this becomes the adminstrator-set node selector for all pods contained in the specified project.

Using the oc adm new-project command adds an annotation section to the project. You can edit a project, and change the openshift.io/node-selector value to override the default:

...
metadata:
  annotations:
    openshift.io/node-selector: type=user-node,region=east
...

You can also override the default value for an existing project namespace by using the following command:

# oc patch namespace myproject -p \
    '{"metadata":{"annotations":{"openshift.io/node-selector":"region=infra"}}}'

If openshift.io/node-selector is set to an empty string (oc adm new-project --node-selector=""), the project will not have an adminstrator-set node selector, even if the cluster-wide default has been set. This means that, as a cluster administrator, you can set a default to restrict developer projects to a subset of nodes and still enable infrastructure or other projects to schedule the entire cluster.

OpenShift Container Platform developers can set a node selector on their pod configuration if they wish to restrict nodes even further. This will be in addition to the project node selector, meaning that you can still dictate node selector values for all projects that have a node selector value.

For example, if a project has been created with the above annotation (openshift.io/node-selector: type=user-node,region=east) and a developer sets another node selector on a pod in that project, for example clearance=classified, the pod will only ever be scheduled on nodes that have all three labels (type=user-node, region=east, and clearance=classified). If they set region=west on a pod, their pods would be demanding nodes with labels region=east and region=west, which cannot work. The pods will never be scheduled, because labels can only be set to one value.

The plug-in configuration should include the default active deadline for run-once pods. This deadline is enforced globally, but can be superseded on a per-project basis.

admissionConfig:
  pluginConfig:
    RunOnceDuration:
      configuration:
        apiVersion: v1
        kind: RunOnceDurationConfig
        activeDeadlineSecondsOverride: 3600 1
....

In addition to specifying a global maximum duration for run-once pods, an administrator can add an annotation (openshift.io/active-deadline-seconds-override) to a specific project to override the global default.

apiVersion: v1
kind: Pod
metadata:
  name: egress-1
  labels:
    name: egress-1
  annotations:
    pod.network.openshift.io/assign-macvlan: "true"
spec:
  containers:
  - name: egress-router
    image: openshift3/ose-egress-router
    securityContext:
      privileged: true
    env:
    - name: EGRESS_SOURCE 1
      value: 192.168.12.99
    - name: EGRESS_GATEWAY 2
      value: 192.168.12.1
    - name: EGRESS_DESTINATION 3
      value: 203.0.113.25
  nodeSelector:
    site: springfield-1 4

apiVersion: v1
kind: Service
metadata:
  name: egress-1
spec:
  ports:
  - name: http
    port: 80
  - name: https
    port: 443
  type: ClusterIP
  selector:
    name: egress-1

As an OpenShift Container Platform cluster administrator, you can use egress policy to limit the external addresses that some or all pods can access from within the cluster, so that:

For example, you can configure projects with different egress policies, allowing <project A> access to a specified IP range, but denying the same access to <project B>.

Project administrators can neither create EgressNetworkPolicy objects, nor edit the ones you create in their project. There are also several other restrictions on where EgressNetworkPolicy can be created:

Violating any of these restrictions will result in broken egress policy for the project, and may cause all external network traffic to be dropped.

To join projects to an existing project network:

$ oc adm pod-network join-projects --to=<project1> <project2> <project3>

In the above example, all the pods and services in <project2> and <project3> can now access any pods and services in <project1> and vice versa. Services can be accessed either by IP or fully-qualified DNS name (<service>.<pod_namespace>.svc.cluster.local). For example, to access a service named db in a project myproject, use db.myproject.svc.cluster.local.

Alternatively, instead of specifying specific project names, you can use the --selector=<project_selector> option.

To verify the networks you have joined together:

$ oc get netnamespaces

Then look at the NETID column. Projects in the same pod-network will have the same NetID.

To allow projects to access all pods and services in the cluster and vice versa:

$ oc adm pod-network make-projects-global <project1> <project2>

In the above example, all the pods and services in <project1> and <project2> can now access any pods and services in the cluster and vice versa.

Alternatively, instead of specifying specific project names, you can use the --selector=<project_selector> option.

As an OpenShift Container Platform cluster administrator, you can use egress firewall policy to limit the external addresses that some or all pods can access from within the cluster, so that:

You can configure projects to have different egress policies. For example, allowing <project A> access to a specified IP range, but denying the same access to <project B>. Or restrict application developers from updating from (Python) pip mirrors, and forcing updates to only come from desired sources.

Project administrators can neither create EgressNetworkPolicy objects, nor edit the ones you create in their project. There are also several other restrictions on where EgressNetworkPolicy can be created:

Violating any of these restrictions results in broken egress policy for the project, and may cause all external network traffic to be dropped.

Use the oc command or the REST API to configure egress policy. You can use oc [create|replace|delete] to manipulate EgressNetworkPolicy objects. The api/swagger-spec/oapi-v1.json file has API-level details on how the objects actually work.

To configure egress policy:

The OpenShift Container Platform egress router runs a service that redirects traffic to a specified remote server, using a private source IP address that is not used for anything else. The service allows pods to talk to servers that are set up to only allow access from whitelisted IP addresses.

Deployment Considerations

The Egress router adds a second IP address and MAC address to the node’s primary network interface. If you are not running OpenShift Container Platform on bare metal, you may need to configure your hypervisor or cloud provider to allow the additional address.

Specifically, ensure that the following are enabled:

Egress Router Modes

The egress router can run in two different modes: redirect mode and HTTP proxy mode. Redirect mode works for all services except for HTTP and HTTPS. For HTTP and HTTPS services, use HTTP proxy mode.

apiVersion: v1
kind: Pod
metadata:
  name: egress-multi
  labels:
    name: egress-multi
  annotations:
    pod.network.openshift.io/assign-macvlan: "true"
spec:
  initContainers:
  - name: egress-router
    image: registry.access.redhat.com/openshift3/ose-egress-router
    securityContext:
      privileged: true
    env:
    - name: EGRESS_SOURCE
      value: 192.168.12.99
    - name: EGRESS_GATEWAY
      value: 192.168.12.1
    - name: EGRESS_DESTINATION
      value: | 1
        80   tcp 203.0.113.25
        8080 tcp 203.0.113.26 80
        8443 tcp 203.0.113.26 443
        203.0.113.27
    - name: EGRESS_ROUTER_MODE
      value: init
  containers:
  - name: egress-router-wait
    image: registry.access.redhat.com/openshift3/ose-pod

Some cluster administrators may want to perform actions on outgoing traffic that do not fit within the model of EgressNetworkPolicy or the egress router. In some cases, this can be done by creating iptables rules directly.

For example, you could create rules that log traffic to particular destinations, or to prevent more than a certain number of outgoing connections per second.

OpenShift Container Platform does not provide a way to add custom iptables rules automatically, but it does provide a place where such rules can be added manually by the administrator. Each node, on startup, will create an empty chain called OPENSHIFT-ADMIN-OUTPUT-RULES in the filter table (assuming that the chain does not already exist). Any rules added to that chain by an administrator will be applied to all traffic going from a pod to a destination outside the cluster (and not to any other traffic).

There are a few things to watch out for when using this functionality:

NetworkPolicy objects allow you to isolate pods that are differentiated from one another by labels, within a namespace.

It is inefficient to apply NetworkPolicy objects to large numbers of individual pods in a single namespace. Pod labels do not exist at the IP level, so NetworkPolicy objects generate a separate OVS flow rule for every single possible link between every pod selected with podSelector.

For example, if the spec podSelector and the ingress podSelector within a NetworkPolicy object each match 200 pods, then 40000 (200*200) OVS flow rules are generated. This might slow down the machine.

To reduce the amount of OVS flow rules, use namespaces to contain groups of pods that need to be isolated.

NetworkPolicy objects that select a whole namespace, by using namespaceSelectors or empty podSelectors, only generate a single OVS flow rule that matches the VXLAN VNID of the namespace.

Keep the pods that do not need to be isolated in their original namespace, and move the pods that require isolation into one or more different namespaces.

Create additional targeted cross-namespace policies to allow the specific traffic that you do want to allow from the isolated pods.

When using the ovs-multitenant plugin, traffic from the routers is automatically allowed into all namespaces. This is because the routers are usually in the default namespace, and all namespaces allow connections from pods in that namespace. With the ovs-networkpolicy plugin, this does not happen automatically. Therefore, if you have a policy that isolates a namespace by default, you need to take additional steps to allow routers to access it.

One option is to create a policy for each service, allowing access from all sources. for example,

kind: NetworkPolicy
apiVersion: extensions/v1beta1
metadata:
  name: allow-to-database-service
spec:
  podSelector:
    matchLabels:
      role: database
  ingress:
  - ports:
    - protocol: TCP
      port: 5432

This allows routers to access the service, but will also allow pods in other users' namespaces to access it as well. This should not cause any issues, as those pods can normally access the service by using the public router.

Alternatively, you can create a policy allowing full access from the default namespace, as in the ovs-multitenant plugin:

The cluster administrators can modify the default project template to enable automatic creation of default NetworkPolicy objects (one or more), whenever a new project is created. To do this:

To view the cluster roles and their associated rule sets:

$ oc describe clusterrole.rbac
Name:		admin
Labels:		<none>
Annotations:	openshift.io/description=A user that has edit rights within the project and can change the project's membership.
		rbac.authorization.kubernetes.io/autoupdate=true
PolicyRule:
  Resources							Non-Resource URLs	Resource Names	Verbs
  ---------							-----------------	--------------	-----
  appliedclusterresourcequotas					[]			[]		[get list watch]
  appliedclusterresourcequotas.quota.openshift.io		[]			[]		[get list watch]
  bindings							[]			[]		[get list watch]
  buildconfigs							[]			[]		[create delete deletecollection get list patch update watch]
  buildconfigs.build.openshift.io				[]			[]		[create delete deletecollection get list patch update watch]
  buildconfigs/instantiate					[]			[]		[create]
  buildconfigs.build.openshift.io/instantiate			[]			[]		[create]
  buildconfigs/instantiatebinary				[]			[]		[create]
  buildconfigs.build.openshift.io/instantiatebinary		[]			[]		[create]
  buildconfigs/webhooks						[]			[]		[create delete deletecollection get list patch update watch]
  buildconfigs.build.openshift.io/webhooks			[]			[]		[create delete deletecollection get list patch update watch]
  buildlogs							[]			[]		[create delete deletecollection get list patch update watch]
  buildlogs.build.openshift.io					[]			[]		[create delete deletecollection get list patch update watch]
  builds							[]			[]		[create delete deletecollection get list patch update watch]
  builds.build.openshift.io					[]			[]		[create delete deletecollection get list patch update watch]
  builds/clone							[]			[]		[create]
  builds.build.openshift.io/clone				[]			[]		[create]
  builds/details						[]			[]		[update]
  builds.build.openshift.io/details				[]			[]		[update]
  builds/log							[]			[]		[get list watch]
  builds.build.openshift.io/log					[]			[]		[get list watch]
  configmaps							[]			[]		[create delete deletecollection get list patch update watch]
  cronjobs.batch						[]			[]		[create delete deletecollection get list patch update watch]
  daemonsets.extensions						[]			[]		[get list watch]
  deploymentconfigrollbacks					[]			[]		[create]
  deploymentconfigrollbacks.apps.openshift.io			[]			[]		[create]
  deploymentconfigs						[]			[]		[create delete deletecollection get list patch update watch]
  deploymentconfigs.apps.openshift.io				[]			[]		[create delete deletecollection get list patch update watch]
  deploymentconfigs/instantiate					[]			[]		[create]
  deploymentconfigs.apps.openshift.io/instantiate		[]			[]		[create]
  deploymentconfigs/log						[]			[]		[get list watch]
  deploymentconfigs.apps.openshift.io/log			[]			[]		[get list watch]
  deploymentconfigs/rollback					[]			[]		[create]
  deploymentconfigs.apps.openshift.io/rollback			[]			[]		[create]
  deploymentconfigs/scale					[]			[]		[create delete deletecollection get list patch update watch]
  deploymentconfigs.apps.openshift.io/scale			[]			[]		[create delete deletecollection get list patch update watch]
  deploymentconfigs/status					[]			[]		[get list watch]
  deploymentconfigs.apps.openshift.io/status			[]			[]		[get list watch]
  deployments.apps						[]			[]		[create delete deletecollection get list patch update watch]
  deployments.extensions					[]			[]		[create delete deletecollection get list patch update watch]
  deployments.extensions/rollback				[]			[]		[create delete deletecollection get list patch update watch]
  deployments.apps/scale					[]			[]		[create delete deletecollection get list patch update watch]
  deployments.extensions/scale					[]			[]		[create delete deletecollection get list patch update watch]
  deployments.apps/status					[]			[]		[create delete deletecollection get list patch update watch]
  endpoints							[]			[]		[create delete deletecollection get list patch update watch]
  events							[]			[]		[get list watch]
  horizontalpodautoscalers.autoscaling				[]			[]		[create delete deletecollection get list patch update watch]
  horizontalpodautoscalers.extensions				[]			[]		[create delete deletecollection get list patch update watch]
  imagestreamimages						[]			[]		[create delete deletecollection get list patch update watch]
  imagestreamimages.image.openshift.io				[]			[]		[create delete deletecollection get list patch update watch]
  imagestreamimports						[]			[]		[create]
  imagestreamimports.image.openshift.io				[]			[]		[create]
  imagestreammappings						[]			[]		[create delete deletecollection get list patch update watch]
  imagestreammappings.image.openshift.io			[]			[]		[create delete deletecollection get list patch update watch]
  imagestreams							[]			[]		[create delete deletecollection get list patch update watch]
  imagestreams.image.openshift.io				[]			[]		[create delete deletecollection get list patch update watch]
  imagestreams/layers						[]			[]		[get update]
  imagestreams.image.openshift.io/layers			[]			[]		[get update]
  imagestreams/secrets						[]			[]		[create delete deletecollection get list patch update watch]
  imagestreams.image.openshift.io/secrets			[]			[]		[create delete deletecollection get list patch update watch]
  imagestreams/status						[]			[]		[get list watch]
  imagestreams.image.openshift.io/status			[]			[]		[get list watch]
  imagestreamtags						[]			[]		[create delete deletecollection get list patch update watch]
  imagestreamtags.image.openshift.io				[]			[]		[create delete deletecollection get list patch update watch]
  jenkins.build.openshift.io					[]			[]		[admin edit view]
  jobs.batch							[]			[]		[create delete deletecollection get list patch update watch]
  limitranges							[]			[]		[get list watch]
  localresourceaccessreviews					[]			[]		[create]
  localresourceaccessreviews.authorization.openshift.io		[]			[]		[create]
  localsubjectaccessreviews					[]			[]		[create]
  localsubjectaccessreviews.authorization.k8s.io		[]			[]		[create]
  localsubjectaccessreviews.authorization.openshift.io		[]			[]		[create]
  namespaces							[]			[]		[get list watch]
  namespaces/status						[]			[]		[get list watch]
  networkpolicies.extensions					[]			[]		[create delete deletecollection get list patch update watch]
  persistentvolumeclaims					[]			[]		[create delete deletecollection get list patch update watch]
  pods								[]			[]		[create delete deletecollection get list patch update watch]
  pods/attach							[]			[]		[create delete deletecollection get list patch update watch]
  pods/exec							[]			[]		[create delete deletecollection get list patch update watch]
  pods/log							[]			[]		[get list watch]
  pods/portforward						[]			[]		[create delete deletecollection get list patch update watch]
  pods/proxy							[]			[]		[create delete deletecollection get list patch update watch]
  pods/status							[]			[]		[get list watch]
  podsecuritypolicyreviews					[]			[]		[create]
  podsecuritypolicyreviews.security.openshift.io		[]			[]		[create]
  podsecuritypolicyselfsubjectreviews				[]			[]		[create]
  podsecuritypolicyselfsubjectreviews.security.openshift.io	[]			[]		[create]
  podsecuritypolicysubjectreviews				[]			[]		[create]
  podsecuritypolicysubjectreviews.security.openshift.io		[]			[]		[create]
  processedtemplates						[]			[]		[create delete deletecollection get list patch update watch]
  processedtemplates.template.openshift.io			[]			[]		[create delete deletecollection get list patch update watch]
  projects							[]			[]		[delete get patch update]
  projects.project.openshift.io					[]			[]		[delete get patch update]
  replicasets.extensions					[]			[]		[create delete deletecollection get list patch update watch]
  replicasets.extensions/scale					[]			[]		[create delete deletecollection get list patch update watch]
  replicationcontrollers					[]			[]		[create delete deletecollection get list patch update watch]
  replicationcontrollers/scale					[]			[]		[create delete deletecollection get list patch update watch]
  replicationcontrollers.extensions/scale			[]			[]		[create delete deletecollection get list patch update watch]
  replicationcontrollers/status					[]			[]		[get list watch]
  resourceaccessreviews						[]			[]		[create]
  resourceaccessreviews.authorization.openshift.io		[]			[]		[create]
  resourcequotas						[]			[]		[get list watch]
  resourcequotas/status						[]			[]		[get list watch]
  resourcequotausages						[]			[]		[get list watch]
  rolebindingrestrictions					[]			[]		[get list watch]
  rolebindingrestrictions.authorization.openshift.io		[]			[]		[get list watch]
  rolebindings							[]			[]		[create delete deletecollection get list patch update watch]
  rolebindings.authorization.openshift.io			[]			[]		[create delete deletecollection get list patch update watch]
  rolebindings.rbac.authorization.k8s.io			[]			[]		[create delete deletecollection get list patch update watch]
  roles								[]			[]		[create delete deletecollection get list patch update watch]
  roles.authorization.openshift.io				[]			[]		[create delete deletecollection get list patch update watch]
  roles.rbac.authorization.k8s.io				[]			[]		[create delete deletecollection get list patch update watch]
  routes							[]			[]		[create delete deletecollection get list patch update watch]
  routes.route.openshift.io					[]			[]		[create delete deletecollection get list patch update watch]
  routes/custom-host						[]			[]		[create]
  routes.route.openshift.io/custom-host				[]			[]		[create]
  routes/status							[]			[]		[get list watch update]
  routes.route.openshift.io/status				[]			[]		[get list watch update]
  scheduledjobs.batch						[]			[]		[create delete deletecollection get list patch update watch]
  secrets							[]			[]		[create delete deletecollection get list patch update watch]
  serviceaccounts						[]			[]		[create delete deletecollection get list patch update watch impersonate]
  services							[]			[]		[create delete deletecollection get list patch update watch]
  services/proxy						[]			[]		[create delete deletecollection get list patch update watch]
  statefulsets.apps						[]			[]		[create delete deletecollection get list patch update watch]
  subjectaccessreviews						[]			[]		[create]
  subjectaccessreviews.authorization.openshift.io		[]			[]		[create]
  subjectrulesreviews						[]			[]		[create]
  subjectrulesreviews.authorization.openshift.io		[]			[]		[create]
  templateconfigs						[]			[]		[create delete deletecollection get list patch update watch]
  templateconfigs.template.openshift.io				[]			[]		[create delete deletecollection get list patch update watch]
  templateinstances						[]			[]		[create delete deletecollection get list patch update watch]
  templateinstances.template.openshift.io			[]			[]		[create delete deletecollection get list patch update watch]
  templates							[]			[]		[create delete deletecollection get list patch update watch]
  templates.template.openshift.io				[]			[]		[create delete deletecollection get list patch update watch]


Name:		basic-user
Labels:		<none>
Annotations:	openshift.io/description=A user that can get basic information about projects.
		rbac.authorization.kubernetes.io/autoupdate=true
PolicyRule:
  Resources						Non-Resource URLs	Resource Names	Verbs
  ---------						-----------------	--------------	-----
  clusterroles						[]			[]		[get list]
  clusterroles.authorization.openshift.io		[]			[]		[get list]
  clusterroles.rbac.authorization.k8s.io		[]			[]		[get list watch]
  projectrequests					[]			[]		[list]
  projectrequests.project.openshift.io			[]			[]		[list]
  projects						[]			[]		[list watch]
  projects.project.openshift.io				[]			[]		[list watch]
  selfsubjectaccessreviews.authorization.k8s.io		[]			[]		[create]
  selfsubjectrulesreviews				[]			[]		[create]
  selfsubjectrulesreviews.authorization.openshift.io	[]			[]		[create]
  storageclasses.storage.k8s.io				[]			[]		[get list]
  users							[]			[~]		[get]
  users.user.openshift.io				[]			[~]		[get]


Name:		cluster-admin
Labels:		<none>
Annotations:	authorization.openshift.io/system-only=true
		openshift.io/description=A super-user that can perform any action in the cluster. When granted to a user within a project, they have full control over quota and membership and can perform every action...
		rbac.authorization.kubernetes.io/autoupdate=true
PolicyRule:
  Resources	Non-Resource URLs	Resource Names	Verbs
  ---------	-----------------	--------------	-----
  		[*]			[]		[*]
  *.*		[]			[]		[*]


Name:		cluster-debugger
Labels:		<none>
Annotations:	authorization.openshift.io/system-only=true
		rbac.authorization.kubernetes.io/autoupdate=true
PolicyRule:
  Resources	Non-Resource URLs	Resource Names	Verbs
  ---------	-----------------	--------------	-----
  		[/debug/pprof]		[]		[get]
  		[/debug/pprof/*]	[]		[get]
  		[/metrics]		[]		[get]


Name:		cluster-reader
Labels:		<none>
Annotations:	authorization.openshift.io/system-only=true
		rbac.authorization.kubernetes.io/autoupdate=true
PolicyRule:
  Resources							Non-Resource URLs	Resource Names	Verbs
  ---------							-----------------	--------------	-----
  								[*]			[]		[get]
  apiservices.apiregistration.k8s.io				[]			[]		[get list watch]
  apiservices.apiregistration.k8s.io/status			[]			[]		[get list watch]
  appliedclusterresourcequotas					[]			[]		[get list watch]

...

To view the current set of cluster role bindings, which show the users and groups that are bound to various roles:

$ oc describe clusterrolebinding.rbac
Name:		admin
Labels:		<none>
Annotations:	rbac.authorization.kubernetes.io/autoupdate=true
Role:
  Kind:	ClusterRole
  Name:	admin
Subjects:
  Kind			Name				Namespace
  ----			----				---------
  ServiceAccount	template-instance-controller	openshift-infra


Name:		basic-users
Labels:		<none>
Annotations:	rbac.authorization.kubernetes.io/autoupdate=true
Role:
  Kind:	ClusterRole
  Name:	basic-user
Subjects:
  Kind	Name			Namespace
  ----	----			---------
  Group	system:authenticated


Name:		cluster-admin
Labels:		kubernetes.io/bootstrapping=rbac-defaults
Annotations:	rbac.authorization.kubernetes.io/autoupdate=true
Role:
  Kind:	ClusterRole
  Name:	cluster-admin
Subjects:
  Kind			Name		Namespace
  ----			----		---------
  ServiceAccount	pvinstaller	default
  Group			system:masters


Name:		cluster-admins
Labels:		<none>
Annotations:	rbac.authorization.kubernetes.io/autoupdate=true
Role:
  Kind:	ClusterRole
  Name:	cluster-admin
Subjects:
  Kind	Name			Namespace
  ----	----			---------
  Group	system:cluster-admins
  User	system:admin


Name:		cluster-readers
Labels:		<none>
Annotations:	rbac.authorization.kubernetes.io/autoupdate=true
Role:
  Kind:	ClusterRole
  Name:	cluster-reader
Subjects:
  Kind	Name			Namespace
  ----	----			---------
  Group	system:cluster-readers


Name:		cluster-status-binding
Labels:		<none>
Annotations:	rbac.authorization.kubernetes.io/autoupdate=true
Role:
  Kind:	ClusterRole
  Name:	cluster-status
Subjects:
  Kind	Name			Namespace
  ----	----			---------
  Group	system:authenticated
  Group	system:unauthenticated


Name:		registry-registry-role
Labels:		<none>
Annotations:	<none>
Role:
  Kind:	ClusterRole
  Name:	system:registry
Subjects:
  Kind			Name		Namespace
  ----			----		---------
  ServiceAccount	registry	default


Name:		router-router-role
Labels:		<none>
Annotations:	<none>
Role:
  Kind:	ClusterRole
  Name:	system:router
Subjects:
  Kind			Name	Namespace
  ----			----	---------
  ServiceAccount	router	default


Name:		self-access-reviewers
Labels:		<none>
Annotations:	rbac.authorization.kubernetes.io/autoupdate=true
Role:
  Kind:	ClusterRole
  Name:	self-access-reviewer
Subjects:
  Kind	Name			Namespace
  ----	----			---------
  Group	system:authenticated
  Group	system:unauthenticated


Name:		self-provisioners
Labels:		<none>
Annotations:	rbac.authorization.kubernetes.io/autoupdate=true
Role:
  Kind:	ClusterRole
  Name:	self-provisioner
Subjects:
  Kind	Name				Namespace
  ----	----				---------
  Group	system:authenticated:oauth


Name:		system:basic-user
Labels:		kubernetes.io/bootstrapping=rbac-defaults
Annotations:	rbac.authorization.kubernetes.io/autoupdate=true
Role:
  Kind:	ClusterRole
  Name:	system:basic-user
Subjects:
  Kind	Name			Namespace
  ----	----			---------
  Group	system:authenticated
  Group	system:unauthenticated


Name:		system:build-strategy-docker-binding
Labels:		<none>
Annotations:	rbac.authorization.kubernetes.io/autoupdate=true
Role:
  Kind:	ClusterRole
  Name:	system:build-strategy-docker
Subjects:
  Kind	Name			Namespace
  ----	----			---------
  Group	system:authenticated


Name:		system:build-strategy-jenkinspipeline-binding
Labels:		<none>
Annotations:	rbac.authorization.kubernetes.io/autoupdate=true
Role:
  Kind:	ClusterRole
  Name:	system:build-strategy-jenkinspipeline
Subjects:
  Kind	Name			Namespace
  ----	----			---------
  Group	system:authenticated


Name:		system:build-strategy-source-binding
Labels:		<none>
Annotations:	rbac.authorization.kubernetes.io/autoupdate=true
Role:
  Kind:	ClusterRole
  Name:	system:build-strategy-source
Subjects:
  Kind	Name			Namespace
  ----	----			---------
  Group	system:authenticated


Name:		system:controller:attachdetach-controller
Labels:		kubernetes.io/bootstrapping=rbac-defaults
Annotations:	rbac.authorization.kubernetes.io/autoupdate=true
Role:
  Kind:	ClusterRole
  Name:	system:controller:attachdetach-controller
Subjects:
  Kind			Name			Namespace
  ----			----			---------
  ServiceAccount	attachdetach-controller	kube-system


Name:		system:controller:certificate-controller
Labels:		kubernetes.io/bootstrapping=rbac-defaults
Annotations:	rbac.authorization.kubernetes.io/autoupdate=true
Role:
  Kind:	ClusterRole
  Name:	system:controller:certificate-controller
Subjects:
  Kind			Name			Namespace
  ----			----			---------
  ServiceAccount	certificate-controller	kube-system


Name:		system:controller:cronjob-controller
Labels:		kubernetes.io/bootstrapping=rbac-defaults
Annotations:	rbac.authorization.kubernetes.io/autoupdate=true

...

All of the default cluster roles can be bound locally to users or groups.

Custom local roles can be created.

The local role bindings are also viewable.

To view the current set of local role bindings, which show the users and groups that are bound to various roles:

$ oc describe rolebinding.rbac

By default, the current project is used when viewing local role bindings. Alternatively, a project can be specified with the -n flag. This is useful for viewing the local role bindings of another project, if the user already has the admindefault cluster role in it.

$ oc describe rolebinding.rbac -n joe-project
Name:		admin
Labels:		<none>
Annotations:	<none>
Role:
  Kind:	ClusterRole
  Name:	admin
Subjects:
  Kind	Name	Namespace
  ----	----	---------
  User	joe


Name:		system:deployers
Labels:		<none>
Annotations:	<none>
Role:
  Kind:	ClusterRole
  Name:	system:deployer
Subjects:
  Kind			Name		Namespace
  ----			----		---------
  ServiceAccount	deployer	joe-project


Name:		system:image-builders
Labels:		<none>
Annotations:	<none>
Role:
  Kind:	ClusterRole
  Name:	system:image-builder
Subjects:
  Kind			Name	Namespace
  ----			----	---------
  ServiceAccount	builder	joe-project


Name:		system:image-pullers
Labels:		<none>
Annotations:	<none>
Role:
  Kind:	ClusterRole
  Name:	system:image-puller
Subjects:
  Kind	Name					Namespace
  ----	----					---------
  Group	system:serviceaccounts:joe-project

In order to add a new signature to the image, you can use the HTTP PUT method to send a JSON payload to the extensions endpoint:

PUT /extensions/v2/<namespace>/<name>/signatures/<digest>

$ curl -X PUT --data @signature.json http://<user>:<token>@<registry_endpoint>:5000/extensions/v2/<namespace>/<name>/signatures/sha256:<digest>

The JSON payload with the signature content should have the following structure:

{
  "version": 2,
  "type":    "atomic",
  "name":    "sha256:4028782c08eae4a8c9a28bf661c0a8d1c2fc8e19dbaae2b018b21011197e1484@cddeb7006d914716e2728000746a0b23",
  "content": "<cryptographic_signature>"
}

The name field contains the name of the image signature, which must be unique and in the format <digest>@<name>. The <digest> represents an image name and the <name> is the name of the signature. The signature name must be 32 characters long. The <cryptographic_signature> must follow the specification documented in the containers/image library.

Assuming a signed image has already been pushed into the OpenShift Container Registry, you can read the signatures using the following command:

GET /extensions/v2/<namespace>/<name>/signatures/<digest>

$ curl http://<user>:<token>@<registry_endpoint>:5000/extensions/v2/<namespace>/<name>/signatures/sha256:<digest>

The <namespace> represents the OpenShift Container Platform project name or registry repository name and the <name> refers to the name of the image repository. The digest represents the SHA-256 checksum of the image.

If the given image contains the signature data, the output of the command above should produce following JSON response:

{
  "signatures": [
  {
    "version": 2,
    "type":    "atomic",
    "name":    "sha256:4028782c08eae4a8c9a28bf661c0a8d1c2fc8e19dbaae2b018b21011197e1484@cddeb7006d914716e2728000746a0b23",
    "content": "<cryptographic_signature>"
  }
  ]
}

The name field contains the name of the image signature, which must be unique and in the format <digest>@<name>. The <digest> represents an image name and the <name> is the name of the signature. The signature name must be 32 characters long. The <cryptographic_signature> must follow the specification documented in the containers/image library.

OpenShift Container Platform can automatically import image signatures if a signature store is configured on all OpenShift Container Platform master nodes through the registries configuration directory.

The registries configuration directory contains the configuration for various registries (servers storing remote container images) and for the content stored in them. The single directory ensures that the configuration does not have to be provided in command-line options for each command, so that it can be shared by all the users of the containers/image.

The default registries configuration directory is located in the /etc/containers/registries.d/default.yaml file.

A sample configuration that will cause image signatures to be imported automatically for all Red Hat images:

docker:
  registry.access.redhat.com:
    sigstore: https://access.redhat.com/webassets/docker/content/sigstore 1

For more details about the registries configuration directory, see Registries Configuration Directory.

apiVersion: v1
kind: Pod
metadata:
  name: security-context-demo
spec:
  securityContext: 1
  containers:
  - name: sec-ctx-demo
    image: gcr.io/google-samples/node-hello:1.0

apiVersion: v1
kind: Pod
metadata:
  name: security-context-demo
spec:
  securityContext:
    runAsUser: 1000 1
  containers:
    - name: sec-ctx-demo
      image: gcr.io/google-samples/node-hello:1.0

This works with SELinux, fsGroup, and Supplemental Groups. See Volume Security for more information.

In some cases, an administrator might want to allow users or groups outside the administrator group access to create more privileged pods. To do so, you can:

First, create a service account. For example, to create service account mysvcacct in project myproject:

$ oc create serviceaccount mysvcacct -n myproject

Then, add the service account to the privileged SCC.

$ oc adm policy add-scc-to-user privileged system:serviceaccount:myproject:mysvcacct

Then, ensure that the resource is being created on behalf of the service account. To do so, set the spec.serviceAccountName field to a service account name. Leaving the service account name blank will result in the default service account being used.

Then, ensure that at least one of the pod’s containers is requesting a privileged mode in the security context.

To relax the security in your cluster so that images are not forced to run as a pre-allocated UID, without granting everyone access to the privileged SCC:

Some container images (examples: postgres and redis) require root access and have certain expectations about how volumes are owned. For these images, add the service account to the anyuid SCC.

$ oc adm policy add-scc-to-user anyuid system:serviceaccount:myproject:mysvcacct

It is recommended that persistent storage using PersistentVolume and PersistentVolumeClaim objects be used for registry deployments. If you are testing and would like to instead use the oc adm registry command with the --mount-host option, you must first create a new service account for the registry and add it to the privileged SCC. See the Administrator Guide for full instructions.

In some cases, an image may require capabilities that Docker does not provide out of the box. You can provide the ability to request additional capabilities in the pod specification which will be validated against an SCC.

When used in conjunction with a non-root user, you must also ensure that the file that requires the additional capability is granted the capabilities using the setcap command. For example, in the Dockerfile of the image:

setcap cap_net_raw,cap_net_admin+p /usr/bin/ping

Further, if a capability is provided by default in Docker, you do not need to modify the pod specification to request it. For example, NET_RAW is provided by default and capabilities should already be set on ping, therefore no special steps should be required to run ping.

To provide additional capabilities:

When you grant access to the anyuid SCC for everyone, your cluster:

 $ oc adm policy add-scc-to-group anyuid system:authenticated

To modify your cluster so that it does not pre-allocate UIDs and does not allow containers to run as root, grant access to the nonroot SCC for everyone:

 $ oc adm policy add-scc-to-group nonroot system:authenticated

To relax the security in your cluster so that pods are allowed to use the hostPath volume plug-in without granting everyone access to more privileged SCCs such as privileged, hostaccess, or hostmount-anyuid, perform the following actions:

Now, all the pods that request hostPath volumes are admitted by the hostpath SCC.

You may control the sort ordering of SCCs in admission by setting the Priority field of the SCCs. See the SCC Prioritization section for more information on sorting.

Before adding an SCC to a user or group, you can first use the scc-review option to check if the user or group can create a pod. See the Authorization topic for more information.

SCCs are not granted directly to a project. Instead, you add a service account to an SCC and either specify the service account name on your pod or, when unspecified, run as the default service account.

To add an SCC to a user:

$ oc adm policy add-scc-to-user <scc_name> <user_name>

To add an SCC to a service account:

$ oc adm policy add-scc-to-user <scc_name> \
    system:serviceaccount:<serviceaccount_namespace>:<serviceaccount_name>

If you are currently in the project to which the service account belongs, you can use the -z flag and just specify the <serviceaccount_name>.

$ oc adm policy add-scc-to-user <scc_name> -z <serviceaccount_name>

To add an SCC to a group:

$ oc adm policy add-scc-to-group <scc_name> <group_name>

To add an SCC to all service accounts in a namespace:

$ oc adm policy add-scc-to-group <scc_name> \
    system:serviceaccounts:<serviceaccount_namespace>

Pod scheduling is an internal process that determines placement of new pods onto nodes within the cluster.

The scheduler code has a clean separation that watches new pods as they get created and identifies the most suitable node to host them. It then creates bindings (pod to node bindings) for the pods using the master API.

OpenShift Container Platform comes with a default scheduler that serves the needs of most users. The default scheduler uses both inherent and customizable tools to determine the best fit for a pod.

For information on how the default scheduler determines pod placement and available customizable parameters, see Default Scheduling.

In situations where you might want more control over where new pods are placed, the OpenShift Container Platform advanced scheduling features allow you to configure a pod so that the pod is required to (or has a preference to) run on a particular node or alongside a specific pod. Advanced scheduling also allows you to prevent pods from being placed on a node or with another pod.

For information about advanced scheduling, see Advanced Scheduling.

OpenShift Container Platform also allows you to use your own or third-party schedulers by editing the pod specification.

For more information, see Custom Schedulers.

The default OpenShift Container Platform pod scheduler is responsible for determining placement of new pods onto nodes within the cluster. It reads data from the pod and tries to find a node that is a good fit based on configured policies. It is completely independent and exists as a standalone/pluggable solution. It does not modify the pod and just creates a binding for the pod that ties the pod to the particular node.

The existing generic scheduler is the default platform-provided scheduler engine that selects a node to host the pod in a three-step operation:

The available nodes are filtered based on the constraints or requirements specified. This is done by running each node through the list of filter functions called predicates.

The selection of the predicate and priorities defines the policy for the scheduler.

The scheduler configuration file is a JSON file that specifies the predicates and priorities the scheduler will consider.

In the absence of the scheduler policy file, the default configuration file, /etc/origin/master/scheduler.json, gets applied.

{
    "apiVersion": "v1",
    "kind": "Policy",
    "predicates": [
        {
            "name": "NoVolumeZoneConflict"
        },
        {
            "name": "MaxEBSVolumeCount"
        },
        {
            "name": "MaxGCEPDVolumeCount"
        },
        {
            "name": "MaxAzureDiskVolumeCount"
        },
        {
            "name": "MatchInterPodAffinity"
        },
        {
            "name": "NoDiskConflict"
        },
        {
            "name": "GeneralPredicates"
        },
        {
            "name": "PodToleratesNodeTaints"
        },
        {
            "name": "CheckNodeMemoryPressure"
        },
        {
            "name": "CheckNodeDiskPressure"
        },
        {
            "name": "NoVolumeNodeConflict"
        },
        {
            "argument": {
                "serviceAffinity": {
                    "labels": [
                        "region"
                    ]
                }
            },
            "name": "Region"

         }
    ],
    "priorities": [
        {
            "name": "SelectorSpreadPriority",
            "weight": 1
        },
        {
            "name": "InterPodAffinityPriority",
            "weight": 1
        },
        {
            "name": "LeastRequestedPriority",
            "weight": 1
        },
        {
            "name": "BalancedResourceAllocation",
            "weight": 1
        },
        {
            "name": "NodePreferAvoidPodsPriority",
            "weight": 10000
        },
        {
            "name": "NodeAffinityPriority",
            "weight": 1
        },
        {
            "name": "TaintTolerationPriority",
            "weight": 1
        },
        {
            "argument": {
                "serviceAntiAffinity": {
                    "label": "zone"
                }
            },
            "name": "Zone",
            "weight": 2
        }
    ]
}

kind: "Policy"
version: "v1"
"predicates": [
        {
            "name": "PodFitsResources"
        },
        {
            "name": "NoDiskConflict"
        },
        {
            "name": "MatchNodeSelector"
        },
        {
            "name": "HostName"
        },
        {
            "name": "NoVolumeNodeConflict"
        },
        {
            "argument": {
                "serviceAffinity": {
                    "labels": [
                        "region"
                    ]
                }
            },
            "name": "Region"
        }
    ],
    "priorities": [
        {
            "name": "LeastRequestedPriority",
            "weight": 1
        },
        {
            "name": "BalancedResourceAllocation",
            "weight": 1
        },
        {
            "name": "ServiceSpreadingPriority",
            "weight": 1
        },
        {
            "argument": {
                "serviceAntiAffinity": {
                    "label": "zone"
                }
            },
            "name": "Zone",
            "weight": 2
        }
    ]

Predicates are rules that filter out unqualified nodes.

There are several predicates provided by default in OpenShift Container Platform. Some of these predicates can be customized by providing certain parameters. Multiple predicates can be combined to provide additional filtering of nodes.

{"name" : "NoVolumeZoneConflict"}

{"name" : "MaxEBSVolumeCount"}

{"name" : "MaxGCEPDVolumeCount"}

{"name" : "MaxAzureDiskVolumeCount"}

{"name" : "MatchInterPodAffinity"}

{"name" : "NoDiskConflict"}

{"name" : "PodToleratesNodeTaints"}

{"name" : "CheckNodeMemoryPressure"}

{"name" : "CheckNodeDiskPressure"}

{"name" : "NoVolumeNodeConflict"}

{"name" : "CheckVolumeBinding"}

{"name" : "CheckNodeCondition"}

{"name" : "PodToleratesNodeNoExecuteTaints"}

{"name" : "CheckNodeLabelPresence"}

{"name" : "checkServiceAffinity"}

{"name" : "PodFitsResources"}

{"name" : "PodFitsHostPorts"}

{"name" : "HostName"}

{"name" : "MatchNodeSelector"}

"predicates":[
      {
         "name":"<name>", 1
         "argument":{
            "serviceAffinity":{
               "labels":[
                  "<label>" 2
               ]
            }
         }
      }
   ],

        "name":"ZoneAffinity",
        "argument":{
            "serviceAffinity":{
                "labels":[
                    "rack"
                ]
            }
        }

"predicates":[
      {
         "name":"<name>", 1
         "argument":{
            "labelsPresence":{
               "labels":[
                  "<label>" 2
                ],
                "presence": true 3
            }
         }
      }
   ],

        "name":"RackPreferred",
        "argument":{
            "labelsPresence":{
                "labels":[
                    "rack",
                    "region"
                ],
                "presence": true
            }
        }

Priorities are rules that rank remaining nodes according to preferences.

A custom set of priorities can be specified to configure the scheduler. There are several priorities provided by default in OpenShift Container Platform. Other priorities can be customized by providing certain parameters. Multiple priorities can be combined and different weights can be given to each in order to impact the prioritization.

{"name" : "SelectorSpreadPriority", "weight" : 1}

{"name" : "InterPodAffinityPriority", "weight" : 1}

{"name" : "LeastRequestedPriority", "weight" : 1}

{"name" : "BalancedResourceAllocation", "weight" : 1}

{"name" : "NodePreferAvoidPodsPriority", "weight" : 10000}

{"name" : "NodeAffinityPriority", "weight" : 1}

{"name" : "TaintTolerationPriority", "weight" : 1}

{"name" : "EqualPriority", "weight" : 1}

{"name" : "MostRequestedPriority", "weight" : 1}

{"name" : "ImageLocalityPriority", "weight" : 1}

{"name" : "ServiceSpreadingPriority", "weight" : 1}

"priorities":[
    {
        "name":"<name>", 1
        "weight" : 1 2
        "argument":{
            "serviceAntiAffinity":{
                "label":[
                    "<label>" 3
                ]
            }
        }
    }
]

        "name":"RackSpread", 1
        "weight" : 1 2
        "argument":{
            "serviceAntiAffinity":{
                "label": "rack" 3
            }
        }

"priorities":[
    {
        "name":"<name>", 1
        "weight" : 1, 2
        "argument":{
            "labelPreference":{
                "label": "<label>", 3
                "presence": true 4
            }
        }
    }
]

One of the important use cases for scheduling within OpenShift Container Platform is to support flexible affinity and anti-affinity policies.

The configuration below specifies the default scheduler configuration, if it were to be specified via the scheduler policy file.

kind: "Policy"
version: "v1"
predicates:
...
  - name: "RegionZoneAffinity" 1
    argument:
      serviceAffinity: 2
        labels: 3
          - "region"
          - "zone"
priorities:
...
  - name: "RackSpread" 4
    weight: 1
    argument:
      serviceAntiAffinity: 5
        label: "rack" 6

In all of the sample configurations below, the list of predicates and priority functions is truncated to include only the ones that pertain to the use case specified. In practice, a complete/meaningful scheduler policy should include most, if not all, of the default predicates and priorities listed above.

The following example defines three topological levels, region (affinity) → zone (affinity) → rack (anti-affinity):

kind: "Policy"
version: "v1"
predicates:
...
  - name: "RegionZoneAffinity"
    argument:
      serviceAffinity:
        labels:
          - "region"
          - "zone"
priorities:
...
  - name: "RackSpread"
    weight: 1
    argument:
      serviceAntiAffinity:
        label: "rack"

The following example defines three topological levels, city (affinity) → building (anti-affinity) → room (anti-affinity):

kind: "Policy"
version: "v1"
predicates:
...
  - name: "CityAffinity"
    argument:
      serviceAffinity:
        labels:
          - "city"
priorities:
...
  - name: "BuildingSpread"
    weight: 1
    argument:
      serviceAntiAffinity:
        label: "building"
  - name: "RoomSpread"
    weight: 1
    argument:
      serviceAntiAffinity:
        label: "room"

The following example defines a policy to only use nodes with the 'region' label defined and prefer nodes with the 'zone' label defined:

kind: "Policy"
version: "v1"
predicates:
...
  - name: "RequireRegion"
    argument:
      labelsPresence:
        labels:
          - "region"
        presence: true
priorities:
...
  - name: "ZonePreferred"
    weight: 1
    argument:
      labelPreference:
        label: "zone"
        presence: true

The following example combines both static and configurable predicates and also priorities:

kind: "Policy"
version: "v1"
predicates:
...
  - name: "RegionAffinity"
    argument:
      serviceAffinity:
        labels:
          - "region"
  - name: "RequireRegion"
    argument:
      labelsPresence:
        labels:
          - "region"
        presence: true
  - name: "BuildingNodesAvoid"
    argument:
      labelsPresence:
        labels:
          - "building"
        presence: false
  - name: "PodFitsPorts"
  - name: "MatchNodeSelector"
priorities:
...
  - name: "ZoneSpread"
    weight: 2
    argument:
      serviceAntiAffinity:
        label: "zone"
  - name: "ZonePreferred"
    weight: 1
    argument:
      labelPreference:
        label: "zone"
        presence: true
  - name: "ServiceSpreadingPriority"
    weight: 1

You can run multiple, custom schedulers alongside the default scheduler and configure which scheduler to use for each pods.

To schedule a given pod using a specific scheduler, specify the name of the scheduler in that pod specification.

The steps below are the general process for deploying a scheduler into your cluster.

As a cluster administrator, you can set a policy to prevent application developers with certain roles from targeting specific nodes when scheduling pods.

The Pod Node Constraints admission controller ensures that pods are deployed onto only specified node hosts using labels and prevents users without a specific role from using the nodeSelector field to schedule pods.

Use the Pod Node Constraints admission controller to ensure a pod is deployed onto only a specified node host by assigning it a label and specifying this in the nodeName setting in a pod configuration.

Using node selectors, you can ensure that pods are only placed onto nodes with specific labels. As a cluster administrator, you can use the Pod Node Constraints admission controller to set a policy that prevents users without the pods/binding permission from using node selectors to schedule pods.

The nodeSelectorLabelBlacklist field of a master configuration file gives you control over the labels that certain roles can specify in a pod configuration’s nodeSelector field. Users, service accounts, and groups that have the pods/binding permission role can specify any node selector. Those without the pods/binding permission are prohibited from setting a nodeSelector for any label that appears in nodeSelectorLabelBlacklist.

For example, an OpenShift Container Platform cluster might consist of five data centers spread across two regions. In the U.S., us-east, us-central, and us-west; and in the Asia-Pacific region (APAC), apac-east and apac-west. Each node in each geographical region is labeled accordingly. For example, region: us-east.

As a cluster administrator, you can create an infrastructure where application developers should be deploying pods only onto the nodes closest to their geographical location. You can create a node selector, grouping the U.S. data centers into superregion: us and the APAC data centers into superregion: apac.

To maintain an even loading of resources per data center, you can add the desired region to the nodeSelectorLabelBlacklist section of a master configuration. Then, whenever a developer located in the U.S. creates a pod, it is deployed onto a node in one of the regions with the superregion: us label. If the developer tries to target a specific region for their pod (for example, region: us-east), they receive an error. If they try again, without the node selector on their pod, it can still be deployed onto the region they tried to target, because superregion: us is set as the project-level node selector, and nodes labeled region: us-east are also labeled superregion: us.

The Pod Node Selector admission controller allows you to force pods onto nodes associated with a specific project and prevent pods from being scheduled in those nodes.

The Pod Node Selector admission controller determines where a pod can be placed using labels on projects and node selectors specified in pods. A new pod will be placed on a node associated with a project only if the node selectors in the pod match the labels in the project.

After the pod is created, the node selectors are merged into the pod so that the pod specification includes the labels originally included in the specification and any new labels from the node selectors. The example below illustrates the merging effect.

The Pod Node Selector admission controller also allows you to create a list of labels that are permitted in a specific project. This list acts as a whitelist that lets developers know what labels are acceptable to use in a project and gives administrators greater control over labeling in a cluster.

To activate the Pod Node Selector admission controller:

If you create a pod with a label that is not specified in the project specification, the pod is not scheduled on the node.

For example, here the label env: production is not in any project specification:

nodeSelector:
 "env: production"
 "infra": "fedora",
 "os": "fedora"

If there is a node that does not have a node selector annotation, the pod will be scheduled there.

Advanced scheduling involves configuring a pod so that the pod is required to run on particular nodes or has a preference to run on particular nodes.

Generally, advanced scheduling is not necessary, as the OpenShift Container Platform automatically places pods in a reasonable manner. For example, the default scheduler attempts to distribute pods across the nodes evenly and considers the available resources in a node. However, you might want more control over where a pod is placed.

If a pod needs to be on a machine with a faster disk speed (or prevented from being placed on that machine) or pods from two different services need to be located so they can communicate, you can use advanced scheduling to make that happen.

To ensure that appropriate new pods are scheduled on a dedicated group of nodes and prevent other new pods from being scheduled on those nodes, you can combine these methods as needed.

There are several ways to invoke advanced scheduling in your cluster:

Node affinity is a set of rules used by the scheduler to determine where a pod can be placed. The rules are defined using custom labels on nodes and label selectors specified in pods. Node affinity allows a pod to specify an affinity (or anti-affinity) towards a group of nodes it can be placed on. The node does not have control over the placement.

For example, you could configure a pod to only run on a node with a specific CPU or in a specific availability zone.

There are two types of node affinity rules: required and preferred.

Required rules must be met before a pod can be scheduled on a node. Preferred rules specify that, if the rule is met, the scheduler tries to enforce the rules, but does not guarantee enforcement.

You configure node affinity through the pod specification file. You can specify a required rule, a preferred rule, or both. If you specify both, the node must first meet the required rule, then attempts to meet the preferred rule.

The following example is a pod specification with a rule that requires the pod be placed on a node with a label whose key is e2e-az-NorthSouth and whose value is either e2e-az-North or e2e-az-South:

apiVersion: v1
kind: Pod
metadata:
  name: with-node-affinity
spec:
  affinity:
    nodeAffinity: 1
      requiredDuringSchedulingIgnoredDuringExecution: 2
        nodeSelectorTerms:
        - matchExpressions:
          - key: e2e-az-NorthSouth 3
            operator: In 4
            values:
            - e2e-az-North 5
            - e2e-az-South 6
  containers:
  - name: with-node-affinity
    image: docker.io/ocpqe/hello-pod

The following example is a node specification with a preferred rule that a node with a label whose key is e2e-az-EastWest and whose value is either e2e-az-East or e2e-az-West is preferred for the pod:

apiVersion: v1
kind: Pod
metadata:
  name: with-node-affinity
spec:
  affinity:
    nodeAffinity: 1
      preferredDuringSchedulingIgnoredDuringExecution: 2
      - weight: 1 3
        preference:
          matchExpressions:
          - key: e2e-az-EastWest 4
            operator: In 5
            values:
            - e2e-az-East 6
            - e2e-az-West 7
  containers:
  - name: with-node-affinity
    image: docker.io/ocpqe/hello-pod

There is no explicit node anti-affinity concept, but using the NotIn or DoesNotExist operator replicates that behavior.

The following examples demonstrate node affinity.

Pod affinity and pod anti-affinity allow you to specify rules about how pods should be placed relative to other pods. The rules are defined using custom labels on nodes and label selectors specified in pods. Pod affinity/anti-affinity allows a pod to specify an affinity (or anti-affinity) towards a group of pods it can be placed with. The node does not have control over the placement.

For example, using affinity rules, you could spread or pack pods within a service or relative to pods in other services. Anti-affinity rules allow you to prevent pods of a particular service from scheduling on the same nodes as pods of another service that are known to interfere with the performance of the pods of the first service. Or, you could spread the pods of a service across nodes or availability zones to reduce correlated failures.

Pod affinity/anti-affinity allows you to constrain which nodes your pod is eligible to be scheduled on based on the labels on other pods. A label is a key/value pair.

There are two types of pod affinity rules: required and preferred.

Required rules must be met before a pod can be scheduled on a node. Preferred rules specify that, if the rule is met, the scheduler tries to enforce the rules, but does not guarantee enforcement.

You configure pod affinity/anti-affinity through the pod specification files. You can specify a required rule, a preferred rule, or both. If you specify both, the node must first meet the required rule, then attempts to meet the preferred rule.

The following example shows a pod specification configured for pod affinity and anti-affinity.

In this example, the pod affinity rule indicates that the pod can schedule onto a node only if that node has at least one already-running pod with a label that has the key security and value S1. The pod anti-affinity rule says that the pod prefers to not schedule onto a node if that node is already running a pod with label having key security and value S2.

apiVersion: v1
kind: Pod
metadata:
  name: with-pod-affinity
spec:
  affinity:
    podAffinity: 1
      requiredDuringSchedulingIgnoredDuringExecution: 2
      - labelSelector:
          matchExpressions:
          - key: security 3
            operator: In 4
            values:
            - S1 5
        topologyKey: failure-domain.beta.kubernetes.io/zone
  containers:
  - name: with-pod-affinity
    image: docker.io/ocpqe/hello-pod

apiVersion: v1
kind: Pod
metadata:
  name: with-pod-antiaffinity
spec:
  affinity:
    podAntiAffinity: 1
      preferredDuringSchedulingIgnoredDuringExecution: 2
      - weight: 100  3
        podAffinityTerm:
          labelSelector:
            matchExpressions:
            - key: security 4
              operator: In 5
              values:
              - S2
          topologyKey: kubernetes.io/hostname
  containers:
  - name: with-pod-affinity
    image: docker.io/ocpqe/hello-pod

The following examples demonstrate pod affinity and pod anti-affinity.

A node selector specifies a map of key-value pairs. The rules are defined using custom labels on nodes and selectors specified in pods.

For the pod to be eligible to run on a node, the pod must have the indicated key-value pairs as the label on the node.

If you are using node affinity and node selectors in the same pod configuration, see the important considerations below.

Using nodeSelector in a pod configuration, you can ensure that pods are only placed onto nodes with specific labels.

Taints and tolerations allow the node to control which pods should (or should not) be scheduled on them.

A taint allows a node to refuse pod to be scheduled unless that pod has a matching toleration.

You apply taints to a node through the node specification (NodeSpec) and apply tolerations to a pod through the pod specification (PodSpec). A taint on a node instructs the node to repel all pods that do not tolerate the taint.

Taints and tolerations consist of a key, value, and effect. An operator allows you to leave one of these parameters empty.

A toleration matches a taint:

You add a taint to a node using the oc adm taint command with the parameters described in the Taint and toleration components table:

$ oc adm taint nodes <node-name> <key>=<value>:<effect>

For example:

$ oc adm taint nodes node1 key1=value1:NoSchedule

The example places a taint on node1 that has key key1, value value1, and taint effect NoSchedule.

To add a toleration to a pod, edit the pod specification to include a tolerations section:

tolerations:
- key: "key1" 1
  operator: "Equal" 2
  value: "value1" 3
  effect: "NoExecute" 4
  tolerationSeconds: 3600 5

tolerations:
- key: "key1"
  operator: "Exists"
  effect: "NoExecute"
  tolerationSeconds: 3600

Both of these tolerations match the taint created by the oc adm taint command above. A pod with either toleration would be able to schedule onto node1.

tolerations:
- key: "key1"
  operator: "Equal"
  value: "value1"
  effect: "NoExecute"
  tolerationSeconds: 3600

OpenShift Container Platform can be configured to represent node unreachable and node not ready conditions as taints. This allows per-pod specification of how long to remain bound to a node that becomes unreachable or not ready, rather than using the default of five minutes.

When the Taint Based Evictions feature is enabled, the taints are automatically added by the node controller and the normal logic for evicting pods from Ready nodes is disabled.

To enable Taint Based Evictions:

DaemonSet pods are created with NoExecute tolerations for node.alpha.kubernetes.io/unreachable and node.alpha.kubernetes.io/not-ready with no tolerationSeconds to ensure that DaemonSet pods are never evicted due to these problems, even when the Default Toleration Seconds feature is disabled.

Taints and tolerations are a flexible way to steer pods away from nodes or evict pods that should not be running on a node. A few of typical scenrios are: