Procedure 6.5. Task

• • Management CLI

    1. Section 3.3.2, “Launch the Management CLI”.
    2. Use the write-attribute command to configure a datasource attribute:

       /subsystem=datasources/data-source=DATASOURCE_NAME:write-attribute(name=ATTRIBUTE_NAME,value=ATTRIBUTE_VALUE)

    3. Reload the server to confirm the changes:

       :reload

  • Management Console

    1. Section 3.2.2, “Log in to the Management Console”.

    2. Navigate to the Datasources panel in the Management Console

       1. • Standalone Mode

            Select the Profile tab from the top-right of the console.

          • Domain Mode

            1. Select the Profiles tab from the top-right of the console.
            2. Select the appropriate profile from the drop-down box in the top left.
            3. Expand the Subsystems menu on the left of the console.
       2. Select Connector → Datasources from the menu on the left of the console.
       

       Figure 6.2. Datasources panel

    3. Edit the datasource

       1. Select the relevant datasource from the Available Datasources list. The datasource attributes are displayed in the Attributes panel below it.
       2. Select the Edit button to edit the datasource attributes.
       3. Edit the datasource attributes and select the Save button when done.