6.4.3. Remove an XA Datasource with the Management Interfaces

Procedure 6.9. Remove an XA Datasource Using Either the Management CLI or the Management Console

• • Management CLI

    1. Section 3.5.2, “Launch the Management CLI”.
    2. Run the following command to remove an XA datasource:

       xa-data-source remove --name=XA_DATASOURCE_NAME

  • Management Console

    1. Section 3.4.2, “Log in to the Management Console”.

    2. Navigate to the Datasources panel in the Management Console

       1. • Standalone Mode

            Select the Profile tab from the top of the console.

          • Domain Mode

            1. Select the Profiles tab from the top of the console.
            2. Select the appropriate profile from the drop-down box in the top left.
            3. Expand the Subsystems menu on the left of the console.
       2. Select Connector → Datasources from the menu on the left of the console.
    3. Select the XA Datasource tab.
    4. Select the registered XA datasource to be deleted, and click the Remove button in the top right corner of the console.