13.3.6. Configure a Size Log Handler in the CLI
Size rotated file log handlers can be added, removed and edited in the CLI.
The tasks you will perform to configure a size rotated file log handler are:
- Add a new log handler.
- Display the configuration of the log handler
- Set the handler's log level.
- Set the handler's appending behavior.
- Set whether the handler uses autoflush or not.
- Set the encoding used for the handler's output.
- Specify the file to which the log handler will write.
- Set the formatter used for the handler's output.
- Set the maximum size of each log file
- Set the maximum number of backup logs to keep
- Remove a log handler.
Each of these tasks are described below.
Important
When configuring a log handler in a logging profile the root of the configuration path is
/subsystem=logging/logging-profile=NAME/
instead of /subsystem=logging/
.
- Add a new log handler
- Use the
add
operation with the following syntax./subsystem=logging/size-rotating-file-handler=HANDLER:add(file={"path"=>"PATH", "relative-to"=>"DIR"})
Replace HANDLER with the name of the log handler. Replace PATH with the filename for the file that the log is being written to. Replace DIR with the name of the directory where the file is to be located. The value of DIR can be a path variable.Example 13.39. Add a new log handler
[standalone@localhost:9999 /] /subsystem=logging/size-rotating-file-handler=ACCOUNTS_TRACE:add(file={"path"=>"accounts_trace.log", "relative-to"=>"jboss.server.log.dir"}) {"outcome" => "success"} [standalone@localhost:9999 /]
- Display the configuration of the log handler
- Use the
read-resource
operation with the following syntax./subsystem=logging/size-rotating-file-handler=HANDLER:read-resource
Replace HANDLER with the name of the log handler.Example 13.40. Display the configuration of the log handler
[standalone@localhost:9999 /] /subsystem=logging/size-rotating-file-handler=ACCOUNTS_TRACE:read-resource { "outcome" => "success", "result" => { "append" => true, "autoflush" => true, "encoding" => undefined, "file" => { "path" => "accounts_trace.log", "relative-to" => "jboss.server.log.dir" }, "filter" => undefined, "formatter" => "%d{HH:mm:ss,SSS} %-5p [%c] (%t) %s%E%n", "level" => undefined, "max-backup-index" => 1, "rotate-size" => "2m" } } [standalone@localhost:9999 /]
- Set the handler's log level
- Use the
change-log-level
operation with the following syntax./subsystem=logging/size-rotating-file-handler=HANDLER:change-log-level(level="LEVEL")
Replace HANDLER with the name of the log handler. Replace LEVEL with the log level that is to be set.Example 13.41. Set the handler's log level
[standalone@localhost:9999 /] /subsystem=logging/size-rotating-file-handler=ACCOUNTS_TRACE:change-log-level(level="TRACE") {"outcome" => "success"} [standalone@localhost:9999 /]
- Set the handler's appending behavior
- Use the
write-attribute
operation with the following syntax./subsystem=logging/size-rotating-file-handler=HANDLER:write-attribute(name="append", value="BOOLEAN")
Replace HANDLER with the name of the log handler. Replace BOOLEAN withfalse
if you required that a new log file be created each time the application server is launched. Replace BOOLEAN withtrue
if the application server should continue to use the same file.JBoss EAP 6 must be restarted for this change to take effect.Example 13.42. Set the handler's appending behavior
[standalone@localhost:9999 /] /subsystem=logging/size-rotating-file-handler=ACCOUNTS_TRACE:write-attribute(name="append", value="true") { "outcome" => "success", "response-headers" => { "operation-requires-reload" => true, "process-state" => "reload-required" } } [standalone@localhost:9999 /]
- Set whether the handler uses autoflush or not
- Use the
write-attribute
operation with the following syntax./subsystem=logging/size-rotating-file-handler=HANDLER:write-attribute(name="autoflush", value="BOOLEAN")
Replace HANDLER with the name of the log handler. Replace BOOLEAN withtrue
if this handler is to immediately write its output.Example 13.43. Set whether the handler uses autoflush or not
[standalone@localhost:9999 /] /subsystem=logging/size-rotating-file-handler=ACCOUNTS_TRACE:write-attribute(name="autoflush", value="true") {"outcome" => "success"} [standalone@localhost:9999 /]
- Set the encoding used for the handler's output
- Use the
write-attribute
operation with the following syntax./subsystem=logging/size-rotating-file-handler=HANDLER:write-attribute(name="encoding", value="ENCODING")
Replace HANDLER with the name of the log handler. Replace ENCODING with the name of the required character encoding system.Example 13.44. Set the encoding used for the handler's output
[standalone@localhost:9999 /] /subsystem=logging/size-rotating-file-handler=ACCOUNTS_TRACE:write-attribute(name="encoding", value="utf-8") {"outcome" => "success"} [standalone@localhost:9999 /]
- Specify the file to which the log handler will write
- Use the
change-file
operation with the following syntax./subsystem=logging/size-rotating-file-handler=HANDLER:change-file(file={"path"=>"PATH", "relative-to"=>"DIR"})
Replace HANDLER with the name of the log handler. Replace PATH with the filename for the file that the log is being written to. Replace DIR with the name of the directory where the file is to be located. The value of DIR can be a path variable.Example 13.45. Specify the file to which the log handler will write
[standalone@localhost:9999 /] /subsystem=logging/size-rotating-file-handler=ACCOUNTS_TRACE:change-file(file={"path"=>"accounts_trace.log", "relative-to"=>"jboss.server.log.dir"}) {"outcome" => "success"} [standalone@localhost:9999 /]
- Set the formatter used for the handler's output
- Use the
write-attribute
operation with the following syntax./subsystem=logging/size-rotating-file-handler=HANDLER:write-attribute(name="formatter", value="FORMATTER")
Replace HANDLER with the name of the log handler. Replace FORMAT with the required formatter string.Example 13.46. Set the formatter used for the handler's output
[standalone@localhost:9999 /] /subsystem=logging/size-rotating-file-handler=ACCOUNTS_TRACE:write-attribute(name="formatter", value="%d{HH:mm:ss,SSS} %-5p (%c) [%t] %s%E%n") {"outcome" => "success"} [standalone@localhost:9999 /]
- Set the maximum size of each log file
- Use the
write-attribute
operation with the following syntax./subsystem=logging/size-rotating-file-handler=HANDLER:write-attribute(name="rotate-size", value="SIZE")
Replace HANDLER with the name of the log handler. Replace SIZE with maximum file size.Example 13.47. Set the maximum size of each log file
[standalone@localhost:9999 /] /subsystem=logging/size-rotating-file-handler=ACCOUNTS_TRACE:write-attribute(name="rotate-size", value="50m") {"outcome" => "success"} [standalone@localhost:9999 /]
- Set the maximum number of backup logs to keep
- Use the
write-attribute
operation with the following syntax./subsystem=logging/size-rotating-file-handler=HANDLER:write-attribute(name="max-backup-index", value="NUMBER")
Replace HANDLER with the name of the log handler. Replace NUMBER with the required number of log files to keep.Example 13.48. Set the maximum number of backup logs to keep
[standalone@localhost:9999 /] /subsystem=logging/size-rotating-file-handler=ACCOUNTS_TRACE:write-attribute(name="max-backup-index", value="5") {"outcome" => "success"} [standalone@localhost:9999 /]
- Remove a log handler
- Use the
remove
operation with the following syntax./subsystem=logging/size-rotating-file-handler=HANDLER:remove
Replace HANDLER with the name of the log handler.Example 13.49. Remove a log handler
[standalone@localhost:9999 /] /subsystem=logging/size-rotating-file-handler=ACCOUNTS_TRACE:remove {"outcome" => "success"} [standalone@localhost:9999 /]