You can view list of write throughput of files on each brick or nfs server. If brick name is not specified, then the metrics of all the bricks belonging to that volume will be displayed. The output will be the write throughput.
This command will initiate a write for the specified count and block size and measures the corresponding throughput directly on back-end export (bypassing glusterFS processes). To view list of write performance on each brick:
- View list of write performance on each brick using the following command:
# gluster volume topVOLNAMEwrite-perf [bsblk-sizecountcount] [nfs | brickBRICK-NAME] [list-cntcnt]For example, to view write performance on brickserver:/export/oftest-volume, 256 block size of count 1, and list count 10:# gluster volume toptest-volumewrite-perf bs 256 count 1 brickserver:/export/list-cnt10Brick:server:/export/dir1256 bytes (256 B) copied, Throughput: 2.8 MB/s# gluster volume top test-volume write-perf bs 256 count 1 brick server:/export/ list-cnt 10 Brick: server:/export/dir1 256 bytes (256 B) copied, Throughput: 2.8 MB/s ==========Write throughput file stats======== write filename Time throughput (MBps) 1170.00 /clients/client0/~dmtmp/SEED/ -2012-05-09 SMALL.FIL 15:39:09.171494 1008.00 /clients/client6/~dmtmp/SEED/ -2012-05-09 LARGE.FIL 15:39:09.73189 949.00 /clients/client0/~dmtmp/SEED/ -2012-05-09 MEDIUM.FIL 15:38:36.927426 936.00 /clients/client0/~dmtmp/SEED/ -2012-05-09 LARGE.FIL 15:38:36.933177 897.00 /clients/client5/~dmtmp/SEED/ -2012-05-09 MEDIUM.FIL 15:39:09.33628 897.00 /clients/client6/~dmtmp/SEED/ -2012-05-09 MEDIUM.FIL 15:39:09.27713 885.00 /clients/client0/~dmtmp/SEED/ -2012-05-09 SMALL.FIL 15:38:36.924271 528.00 /clients/client5/~dmtmp/SEED/ -2012-05-09 LARGE.FIL 15:39:09.81893 516.00 /clients/client6/~dmtmp/ACCESS/ -2012-05-09 FASTENER.MDB 15:39:01.797317