8.5.6. Configuring Hypervisor Simple Network Management Protocol

Summary

The SNMP screen allows you to enable and configure a password for Simple Network Management Protocol.

Enable SNMP       [ ]

SNMP Password
Password:          _______________
Confirm Password:  _______________


<Save>     <Reset>

Procedure 8.18. Configuring Hypervisor Simple Network Management Protocol

Select the Enable SNMP field.
Press Space to toggle between enabling SNMP and disabling SNMP. By default, SNMP is disabled.
Enter the preferred SNMP Password for the Hypervisor.
Enter the preferred SNMP password again in the Confirm Password field.
Select <Save> and press Enter to save your changes.

Result

SNMP is now configured.