Chapter 3. Targeted Policy

Targeted policy is the default SELinux policy used in Red Hat Enterprise Linux. When using targeted policy, processes that are targeted run in a confined domain, and processes that are not targeted run in an unconfined domain. For example, by default, logged-in users run in the unconfined_t domain, and system processes started by init run in the unconfined_service_t domain; both of these domains are unconfined.
Executable and writable memory checks may apply to both confined and unconfined domains. However, by default, subjects running in an unconfined domain can allocate writable memory and execute it. These memory checks can be enabled by setting Booleans, which allow the SELinux policy to be modified at runtime. Boolean configuration is discussed later.

3.1. Confined Processes

Almost every service that listens on a network, such as sshd or httpd, is confined in Red Hat Enterprise Linux. Also, most processes that run as the root user and perform tasks for users, such as the passwd utility, are confined. When a process is confined, it runs in its own domain, such as the httpd process running in the httpd_t domain. If a confined process is compromised by an attacker, depending on SELinux policy configuration, an attacker's access to resources and the possible damage they can do is limited.
Complete this procedure to ensure that SELinux is enabled and the system is prepared to perform the following example:

Procedure 3.1. How to Verify SELinux Status

  1. Confirm that SELinux is enabled, is running in enforcing mode, and that targeted policy is being used. The correct output should look similar to the output below:
    ~]$ sestatus
    SELinux status:                 enabled
    SELinuxfs mount:                /sys/fs/selinux
    Current mode:                   enforcing
    Mode from config file:          enforcing
    Policy version:                 24
    Policy from config file:        targeted
    
    See Section 4.4, “Permanent Changes in SELinux States and Modes” for detailed information about changing SELinux modes.
  2. As root, create a file in the /var/www/html/ directory:
    ~]# touch /var/www/html/testfile
  3. Enter the following command to view the SELinux context of the newly created file:
    ~]$ ls -Z /var/www/html/testfile       
    -rw-r--r--  root root unconfined_u:object_r:httpd_sys_content_t:s0 /var/www/html/testfile
    
    By default, Linux users run unconfined in Red Hat Enterprise Linux, which is why the testfile file is labeled with the SELinux unconfined_u user. RBAC is used for processes, not files. Roles do not have a meaning for files; the object_r role is a generic role used for files (on persistent storage and network file systems). Under the /proc directory, files related to processes may use the system_r role. The httpd_sys_content_t type allows the httpd process to access this file.
The following example demonstrates how SELinux prevents the Apache HTTP Server (httpd) from reading files that are not correctly labeled, such as files intended for use by Samba. This is an example, and should not be used in production. It assumes that the httpd and wget packages are installed, the SELinux targeted policy is used, and that SELinux is running in enforcing mode.

Procedure 3.2. An Example of Confined Process

  1. As root, start the httpd daemon:
    ~]# systemctl start httpd.service
    Confirm that the service is running. The output should include the information below (only the time stamp will differ):
    ~]$ systemctl status httpd.service
    httpd.service - The Apache HTTP Server
    	  Loaded: loaded (/usr/lib/systemd/system/httpd.service; disabled)
    	  Active: active (running) since Mon 2013-08-05 14:00:55 CEST; 8s ago
    
  2. Change into a directory where your Linux user has write access to, and enter the following command. Unless there are changes to the default configuration, this command succeeds:
    ~]$ wget http://localhost/testfile
    --2009-11-06 17:43:01--  http://localhost/testfile
    Resolving localhost... 127.0.0.1
    Connecting to localhost|127.0.0.1|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 0 [text/plain]
    Saving to: `testfile'
    
    [ <=>                              ] 0     --.-K/s   in 0s
    		
    2009-11-06 17:43:01 (0.00 B/s) - `testfile' saved [0/0]
    
  3. The chcon command relabels files; however, such label changes do not survive when the file system is relabeled. For permanent changes that survive a file system relabel, use the semanage utility, which is discussed later. As root, enter the following command to change the type to a type used by Samba:
    ~]# chcon -t samba_share_t /var/www/html/testfile
    Enter the following command to view the changes:
    ~]$ ls -Z /var/www/html/testfile
    -rw-r--r--  root root unconfined_u:object_r:samba_share_t:s0 /var/www/html/testfile
    
  4. Note that the current DAC permissions allow the httpd process access to testfile. Change into a directory where your user has write access to, and enter the following command. Unless there are changes to the default configuration, this command fails:
    ~]$ wget http://localhost/testfile
    --2009-11-06 14:11:23--  http://localhost/testfile
    Resolving localhost... 127.0.0.1
    Connecting to localhost|127.0.0.1|:80... connected.
    HTTP request sent, awaiting response... 403 Forbidden
    2009-11-06 14:11:23 ERROR 403: Forbidden.
    
  5. As root, remove testfile:
    ~]# rm -i /var/www/html/testfile
  6. If you do not require httpd to be running, as root, enter the following command to stop it:
    ~]# systemctl stop httpd.service
This example demonstrates the additional security added by SELinux. Although DAC rules allowed the httpd process access to testfile in step 2, because the file was labeled with a type that the httpd process does not have access to, SELinux denied access.
If the auditd daemon is running, an error similar to the following is logged to /var/log/audit/audit.log:
type=AVC msg=audit(1220706212.937:70): avc:  denied  { getattr } for  pid=1904 comm="httpd" path="/var/www/html/testfile" dev=sda5 ino=247576 scontext=unconfined_u:system_r:httpd_t:s0 tcontext=unconfined_u:object_r:samba_share_t:s0  tclass=file

type=SYSCALL msg=audit(1220706212.937:70): arch=40000003 syscall=196 success=no exit=-13 a0=b9e21da0 a1=bf9581dc a2=555ff4 a3=2008171 items=0 ppid=1902 pid=1904 auid=500 uid=48 gid=48 euid=48 suid=48 fsuid=48 egid=48 sgid=48 fsgid=48 tty=(none) ses=1 comm="httpd" exe="/usr/sbin/httpd" subj=unconfined_u:system_r:httpd_t:s0 key=(null)
Also, an error similar to the following is logged to /var/log/httpd/error_log:
[Wed May 06 23:00:54 2009] [error] [client 127.0.0.1] (13)Permission denied: access to /testfile denied