-
Language:
English
-
Language:
English
Red Hat Training
A Red Hat training course is available for Red Hat Enterprise Linux
4. Device Drivers
4.1. Storage Drivers
- The
bnx2i
driver for Broadcom NetXtreme II iSCSI has been updated to version 2.6.2.3. - The
mpt2sas
driver that supports the SAS-2 family of adapters from LSI has been updated to version 08.101.00.00. Most notably, this update provides support for WarpDrive SSS-6200 devices. - The
megaraid
driver is updated to version 5.34. - The
arcmsr
driver for Areca RAID controllers is updated. - The
bfa
driver for Brocade Fibre Channel to PCIe Host Bus Adapters is updated to the current scsi-misc version. - The
be2iscsi
driver for ServerEngines BladeEngine 2 Open iSCSI devices is updated. - The
qla2xxx
driver for QLogic Fibre Channel HBAs is updated to version 8.03.07.00.05.07. Additionally, the qla24xx and 25xx firmware is updated to 5.03.16. - The
lpfc
driver for Emulex Fibre Channel Host Bus Adapters is updated to version 8.2.0.96 driver. - The IBM Virtual Ethernet (
ibmveth
) driver is updated, adding support for the optional flush of the rx buffer, scatter-gather, rx_copybreak, and tx_copybreak support, and enhanced power virtual ethernet performance. - The
ibmvfc
driver is updated to version 1.0.9. - The
mptfusion
driver is updated to version to 3.04.18rh. - The
cciss
driver for HP Smart Array controllers has been updated, adding kdump support and performance mode support on the controller.
4.2. Network Drivers
- The
cxgb4
driver for Chelsio Terminator4 10G Unified Wire Network Controllers is updated. - The
cxgb3
driver for the Chelsio T3 Family of network devices is updated. - The
e1000
driver for Intel PRO/1000 network devices has been updated, adding support for the Marvell Alaska M88E1118R PHY and CE4100 reference platform. - The
enic
driver for Cisco 10G Ethernet devices has been updated to version 2.1.1.9. - The
myri10ge
driver for Myricom Myri-10G Ethernet devices has been updated to version 1.5.2. - The
igb
driver for Intel Gigabit Ethernet Adapters is updated. - The
tg3
driver for Broadcom Tigon3 ethernet devices is updated to version 3.116, adding support for EEE. - The
bna
driver for Brocade 10Gb Ethernet devices is updated to version 2.3.2.3. - The
qlcnic
driver is updated to 5.0.13, adding support for large receive offload (LRO) and generic receive offload (GRO). - The
netxen
driver for NetXen Multi port (1/10) Gigabit Network devices is updated to version 4.0.75, adding support for GbE port settings. - The
be2net
driver for ServerEngines BladeEngine2 10Gbps network devices is updated, adding support for multicast filter on the Lancer family of CNAs and enabling IPv6 TSO support. - The
ixgbe
driver for Intel 10 Gigabit PCI Express network devices is updated to version 3.2.9-k2, adding support for FCoE and kcq2 support on the 57712 device. - The
iwl6000-firmware
is updated to version 9.221.4.1. - The
iwl5150-firmware
package is now available on the Supplementary CD. - The
1000e
driver is updated to version 1.3.10. - The
ixgbevf
driver is updated to version 2.0.0-k2. - The
igbvf
driver is updated. - The
bnx2x
driver is updated to version 1.62.00-6, adding DCB/PFC and FCoE ring support, 57712 device support, and adding BCM84823 to the supported PHYs. Additionally, the bnx2x firmware is updated to version 6.2.5.0. - The
bnx2
driver is updated to version 2.0.18+. - The
atl1e
driver for Atheros GbE NICs driver is now available in Red Hat Enterprise Linux 5.7. - The
iw_cxgb4
driver is now available in Red Hat Enterprise Linux 5.7. - The
iw_cxgb3
driver is updated.
4.3. Graphics Drivers
- The
vesa
driver is updated, to allow the native screen resolution (1360x768) to be set on Dell M4500 machines. - The
ati
driver is updated, enabling DisplayPort interfaces onRV635/RV730
cards. - The
mga
driver is updated, providing support forG200eH/eR
devices.