2.2.3. HP-UX 11i

Directory Server runs on HP-UX version 11i only; earlier HP-UX versions are not supported. Directory Server runs on a 64-bit HP-UX 11i environment as a 64-bit process.
Table 2.4, “HP-UX 11i” lists the hardware requirements. Section, “HP-UX Patches” lists the required patches, and the recommended system configurations are in Section, “HP-UX System Configuration”.

Table 2.4. HP-UX 11i

Criteria Requirements
Operating System HP-UX 11i with the latest patches and upgrades
CPU Type HP 9000 architecture with an Itanium CPU
256 MB minimum
1 GB RAM for large environments
Hard Disk
300 MB of disk space minimum for a typical deployment
2 GB minimum for larger environments
4 GB minimum for very large environments (more than a million entries)
You must use the largefile command to configure database files larger than 2 GB.
Other To run the Directory Server using port numbers less than 1024, such as the default port 389, you must setup and start the Directory Server as root, but it is not necessary to run the Directory Server as root. HP-UX Patches

The HP-UX 11i host must have the correct packages and dependencies installed to run Directory Server. The patch list changes daily, so check the HP site regularly to ensure you have the latest releases:
The first package to install is the PHSS_30966: ld(1) and linker tools cumulative patch. The other required patches are listed in Table 2.5, “HP-UX 11i Patches”. Run the dsktune utility to see if you need to install any other patches. dsktune helps verify whether the appropriate patches are installed on the system and provides useful information for tuning your kernel parameters for best performance. For information on dsktune, see Section 2.2.1, “Using dsktune”.

Table 2.5. HP-UX 11i Patches

Criteria Requirements
GOLDAPPS11i B.11.11.0406.5 Gold Applications Patches for HP-UX 11i v1, June 2004
GOLDBASE11i B.11.11.0406.5 Gold Base Patches for HP-UX 11i v1, June 2004
GOLDQPK11i HP-UX 11i Quality Pack patch from June 2004 or later