What components have not been certified for use with Red Hat Enterprise Linux in the Fujitsu PRIMERGY range of servers?

Updated -

Release Found: Red Hat Enterprise Linux 5.3 and earlier, Red Hat Enterprise Linux 4.8 and earlier

The following Config To Order components have not been tested on Red Hat Enterprise Linux 4 and Red Hat Enterprise Linux 5 during the hardware certification process:

  • Emulex LPe11000 Single Port Fibre Channel HBA Adaptor

  • Emulex LPe11002 Dual Port Fibre Channel HBA Adaptor

  • Emulex LPe1150 Single Port Fibre Channel HBA Adaptor

  • Intel Pro/1000 PF Single Port Server Adaptor

  • DDS Gen6, 80 GB, 6 MB/s, half height, USB 2.0 Tape Drive
  • DDS Gen6, 80 GB, 6 MB/s, half height, SCSI U160 Tape Drive
  • LTO2HH Ultrium, 200 GB,  24 MB/s, half height, SCSI U160 Tape Drive
  • LTO3HH Ultrium, 400 GB,  60 MB/s, half height, SCSI U320 Tape Drive

Use of these components in the following Fujitsu PRIMERGY servers is therefore not fully supported at this time:

  • Fujitsu PRIMERGY TX100 S1
  • Fujitsu PRIMERGY RX200 S5
  • Fujitsu PRIMERGY TX200 S5
  • Fujitsu PRIMERGY RX300 S5
  • Fujitsu PRIMERGY TX300 S5
  • Fujitsu PRIMERGY BX620 S5

For support enquiries regarding these components, please contact the vendor directly via http://ts.fujitsu.com

Comments